Surplus to Ongoing Operations of Sercel Inc Day 2

2011 JPW OVEN ELECTRICS: 208 V / 3PH / 60 HZ S/N: 001102

2011 JPW OVEN ELECTRICS: 208 V / 3PH / 60 HZ S/N: 001101

GRIEVE MODEL 323 POLYSULFIDE CURE OVEN S/N: 10436131011 MAX. TEMPERATURE: 150 DEG. F ELECTRICS: 230 V / 1 PH / 25 AMPS MOTOR: 1/3 HP WORK SPACE DIMENSIONS 36" WIDE X 21" DEEP X 36" HIGH OVERALL DIMS (APPROX.): 40" W X 28" D X 47" H ANALOG, NON-INDICATING TEMPERATURE CONTROLLER ADJUSTABLE MANUAL RESET EXCESS TEMPERATURE CONTROLLER RECIRCULATING BLOWER 1/3 HP, 400 CFM HEAT INPUT 4.4 KW 2" THICK WALL INSULATION 304 STAINLESS STEEL INTERIOR ALUMINIZED STEEL EXTERIOR WITH PAINTED ENAMEL FINISH WO (2) NICKEL PLATED WIRE SHELVES 50 LBS. DISTRIBUTED LOAD PER SHELF 200 LBS. MAXIMUM OVEN SHELF LOADING

2016 FRANCE ETUVES XU112 DRYING OVEN S/N: L708 GENERAL SPECIFICATIONS: MAX. TEMPERATURE: 300 DEG. C (575 DEG. F) TEMPERATURE FLUCTUATION: < +/- 0.2 DEG. C MAX. RATE OF AIR EXCHANGE: 9 CU. M/HR HEATING POWER: 1500 W TOTAL INSTALLED POWER: 1550 W ELECTRICS: 230V /1 PH / 50/60 HZ / 16A WORKING VOL.: 112 L (4 CU. FT.) MAX. NUMBER OF LOADING SHELVES: 8 MAX. LOAD PER SHELF: 30 KG (66 LBS.) MAX. LOAD IN OVEN: 60 KG (132 LBS.) INTERNAL DIMENSIONS (W X D X H): 500 X 450 X 500 MM (19.7" X 17.7" X 19.7") EXTERNAL DIMENSIONS (W X D X H): 664 X 746 X 794 MM (26.1" X 29.4" X 31.2") WEIGHT (EMPTY): 65 KG (143 LBS.) NUMBER OF DOORS: 1 NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION

2011 JPW OVEN ELECTRICS: 208 V / 3PH / 60 HZ S/N: 01183

GRIEVE NB-350 INDUSTRIAL HEAT OVEN ELECTRICS: 2000 WATTS, 230 V, 1 PH, 50/60 HZ GENERAL SPECIFICATIONS: MAX. OPERATING TEMP.: 350 DEG. F AIR FLOW: FORCED CONVECTION, SIDE TO SIDE CONTROL ACCURACY: +/-0.3% OVEN UNIFORMITY: +/-10 DEG. F INTERIOR DIMS: 28" X 24" X 18" HIGH MAX. NUMBER OF SHELVES: 7 SHELF CAP.: 20 LBS. EXTERIOR DIMS (APPROX.): 41" X 30" X 23" HIGH WEIGHT (APPROX.): 210 LBS. GRIEVE MODEL PL-326 FORCED CIRCULATION OVEN ELECTRICS: 2000 WATTS, 230 V, 1 PH, 50/60 HZ GENERAL SPECIFICATIONS: MAX. OPERATING TEMP.: 325 DEG. F WATTS: 2000 AIR FLOW: FORCED CIRCULATION INTERIOR DIMS (APPROX.): 23.5" X 28" X 19" HIGH MAX. NUMBER OF SHELVES: 4 EXTERIOR DIMS (APPROX.): 33.25" X 29" X 24" HIGH WEIGHT (APPROX.): 125 LBS. NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION

PILLAR CYCLE-DYNE MK20 INDUCTION HEATER S/N: 6579-3 WORK TABLE WITH HAKO VACUUM EXHAUST WORK LIGHT WITH MAGNIFYING GASS

2007 ADVANTAGE M1-1ARX-CH CHILLER, 230V, 1 PH, 60 HZ, FLA 9.8 S/N: 101332

VACUUM PUMP SYSTEM IN CUSTOM ENCLOSURE

PILLAR MK20 INDUCTION HEATER, 5KW, 400 KHZ, S/N: 6579-1

PILLAR MK20 INDUCTION HEATER, 5KW, 400 KHZ, S/N: 6579-2

GRACO PR70 HGK DISPENSE SYSTEM ON CART WITH GRACO CONTROL UNIT

UV GLUE STATION WITH DYMAX LIGHT CURING SYSTEM, DYMAX ULTRAVIOLET LIGHT, NORDSON EFD, 48L X 30W X 31H.

INJECTION TABLE WITH POWER TEAM HPU ON MOBILE CART TABLE 72L X 30W X 34H

HP HEWLETT 8447F OPT H64 RF DUAL PREAMPLIFIER/ POWER AMPLIFIER KIT, 9KHZ-1300 MHZ, S/N: 3113A07383.

CLEANING AND DISINFECTING CART

GEORGE STEVENS MFG GSF100CL COIL WINDING MACHINE SYSTEMS S/N: 30054-CHINCLUDES: 8 ROLLS AZONIC WISKER DISK H-06 METAL TABLE SEE PHOTOS

FIBER OPTIC CONNECTOR OVEN TEMPERATURE ADJUSTABLE FIBER OPTIC HEATING CURING FURNACE, MODEL: F1-9772 S/N: CO-H812-30

PHILL-O-CRAFT METAL FRAME WORK TABLE - 150 LB CAPACITY PER SHELF, 144 L X 24 W X 37 H. SEE PHOTO.

SAFETY ENCLOSURE STAND: (2) SIDES WIRE MESH, (1) PANEL WITH ELECTRICAL BOXES AND PUSH BUTTON CONTROLS

LOT OF 3: UPRIGHT SHOP DESKS - SEE PHOTO

SOLDER POT ON CUSTOM TABLE WITH ENCLOSED SAFETY AREA

WARRIOR PORTABLE DRUM LIFTER AND PALLETIZER