Precision CNC Machining Facility Closure Machine Shop Surplus in Houston TX

2020 HAAS UMC-750 5-AXIS UNIVERSAL MACHINING CENTER WITH RENISHAW PROBING SYSTEM. MANUFACTURER: HAAS AUTOMATION, INC. MACHINE TYPE: 5-AXIS UNIVERSAL MACHINING CENTER (MILL). DATE OF MANUFACTURE: 10/2020. VOLTAGE: 220 VAC, 3-PHASE, 50/60 HZ, 70 AMPS. POWER ON TIME: 19,339 HOURS 18 MINUTES. CYCLE START TIME: 741 HOURS 13 MINUTES. FEED CUTTING TIME: 421 HOURS 06 MINUTES. TOTAL TOOL CHANGES: 49,048. X-AXIS TRAVEL: 30.0 IN (762 MM). Y-AXIS TRAVEL: 20.0 IN (508 MM). Z-AXIS TRAVEL: 20.0 IN (508 MM). B-AXIS (TILT): +120 TO -35. C-AXIS (ROTATION): 360 CONTINUOUS. MAXIMUM PART WEIGHT: 660 LB (300 KG). PLATTER DIAMETER: 19.7 IN (500 MM). SPINDLE TAPER: CT OR BT 40. SPINDLE SPEED: 8,100 RPM (INLINE DIRECT-DRIVE). SPINDLE MOTOR: 30 HP (22.4 KW) VECTOR DRIVE. TOOL CHANGER CAPACITY: 50+1 SIDE-MOUNT TOOL CHANGER (SMTC). AIR SUPPLY REQUIRED: 4 SCFM @ 100 PSI (113 LPM @ 6.9 BAR). COOLANT TANK CAPACITY: 75 GAL (284 L). OPERATING WIDTH: 162 IN (4,115 MM). OPERATING DEPTH: 113 IN (2,870 MM). MAX OPERATING HEIGHT: 120 IN (3,048 MM). MACHINE WEIGHT: 18,000 LB (8,164 KG). EQUIPPED WITH: RENISHAW WIRELESS PROBING SYSTEM: RENISHAW SPINDLE-MOUNTED PART PROBING SYSTEM AND TABLE-MOUNTED WIRELESS TOOL SETTER (WIPS) PROBE ASSEMBLY WITH AN OPTICAL INFRARED MACHINE COMMUNICATION RECEIVER. FULL SUITE OF PURCHASED/ENABLED CONTROL FEATURES: MACROS, ROTATION AND SCALING, RIGID TAPPING, TCPC AND DWO, M19 SPINDLE ORIENT, HIGH SPEED MACHINING, VPS EDITING, MEDIA DISPLAY, FOURTH AXIS DRIVE, FIFTH AXIS DRIVE, MAX MEMORY (1 GB), WIRELESS NETWORKING, COMPENSATION TABLES, THROUGH SPINDLE COOLANT (TSC), MAX SPINDLE SPEED (15,000 RPM PARAMETER ENABLED). UPGRADED 50-STATION SIDE-MOUNT AUTOMATIC TOOL CHANGER (SMTC) POCKET CAROUSEL ASSEMBLY. INTEGRATED 500 MM DUAL-AXIS TRUNNION ROTARY PLATTER TABLE CONFIGURATION. HAAS HFD-4 VECTOR SPINDLE DRIVE CONTROLLER AMPLIFIER MODULE HOUSED INSIDE ORIGINAL CLEAN ELECTRICAL CABINET ENCLOSURE LAYOUTS. OPERATOR CONTROL PENDANT CONSOLE BLOCK ARM STATION WITH ADJUSTABLE LCD DISPLAY READOUT INTERFACE SCREEN AND MANUAL AXIS JOG WHEEL ASSEMBLY. S/N: 1175821

2022 TORMACH 1100MX CNC MILLING MACHINE WITH PATHPILOT CONTROL AND 10-STATION ATC. SPECIFICATIONS: MANUFACTURER: TORMACH, INC. MODEL: 1100MX SERIAL NUMBER: ME10703 DATE OF MANUFACTURE: 2022.04 VOLTAGE: 230 VAC 10% PHASE: 1 PHASE (SINGLE-PHASE) CURRENT: 20 A FREQUENCY: 50/60 HZ MASS (MACHINE CORE): 508 KG X-AXIS TRAVEL: 18 INCH Y-AXIS TRAVEL: 11 INCH Z-AXIS TRAVEL: 16.25 INCH MAX FEED RATE (X & Y): 300 IPM MAX FEED RATE (Z): 230 IPM DRIVE TYPE: SERVO MOTORS SPINDLE TAPER: BT30 SPINDLE MOTOR POWER: 2 HP SPINDLE SPEED RANGE: UP TO 10,000 RPM DRIVE MECHANISM: POLY-V BELT THREAD MACHINING: RIGID TAPPING, TENSION/COMPRESSION, THREAD MILLING MAX CLEARANCE (SPINDLE NOSE TO TABLE): 17.25 INCH TABLE DIMENSIONS: 34 INCH 9.5 INCH TABLE T-SLOTS: 3 5/8 INCH MAXIMUM TABLE LOAD: 500 LBS OVERALL SYSTEM DIMENSIONS: 69 INCH 56.5 INCH OVERALL SYSTEM HEIGHT: 96 INCH TYPICAL SYSTEM WEIGHT: ~1,600 LBS (STANDALONE) / UP TO 1,850 LBS (WITH ATC) EQUIPPED WITH: INTEGRATED 10-STATION AUTOMATIC TOOL CHANGER (ATC) CAROUSELS ARRANGED WITH ACTIVE TOOL HOLDERS AND TOOLING BITS SWING-ARM MOUNTED TORMACH PATHPILOT OPERATOR CONTROL PENDANT STATION CONFIGURED WITH AN INTERFACE SCREEN, FULL QWERTY LAYOUT INPUT KEYBOARD, AND PHYSICAL SELECTOR DIALS HEAVY-DUTY INDUSTRIAL MANUAL MACHINE VISE MOUNTED CENTRALLY TO THE WORK TABLE HIGH-VOLUME MODULAR MULTI-JOINTED COOLANT LINES AND SPRAY NOZZLE ASSEMBLY FULLY ENCLOSED WORKSPACE STRUCTURAL CONTAINMENT SHROUD EQUIPPED WITH LARGE TRANSPARENT WINDOW SLIDERS

SMART MACHINE TOOL SV-2 CNC VERTICAL MACHINING CENTER WITH FANUC 0I-MF PLUS CONTROL AND 4TH-AXIS ROTARY TABLE. MANUFACTURER: SMART MACHINE TOOL / DYNAMIC INTERNATIONAL INC. MODEL: SV-2 (SV 2) SERIAL NUMBER: 3859 CNC CONTROL: FANUC SERIES 0I-MF PLUS ELECTRICAL CAPACITY: 40 KVA VOLTAGE REQUIREMENT: 220 V / 3-PHASE / 60 HZ SHORT CIRCUIT CURRENT RATING: 10 KA PNEUMATIC PRESSURE REQUIREMENT: 6 BAR (87 PSI) RECORDED RUN TIME HOURS: 1,541 HOURS 17 MINUTES X-AXIS TRAVEL: 31.5 IN (800 MM) Y-AXIS TRAVEL: 19.7 IN (500 MM) Z-AXIS TRAVEL: 19.7 IN (500 MM) TABLE DIMENSIONS: 39.37 IN X 19.69 IN (1,000 MM X 500 MM) MAXIMUM TABLE LOAD: 1,320 LBS (600 KG) SPINDLE NOSE-TO-TABLE: 3.94 IN 23.6 IN (100 MM 600 MM) SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: CAT 40 (BIG-PLUS) SPINDLE MOTOR: 20 HP / 25 HP (CONTINUOUS / 30-MIN PEAK) SPINDLE TORQUE: 87 FT-LBS AUTOMATIC TOOL CHANGER (ATC): 30 STATIONS (SIDE-MOUNT TWIN-ARM STYLE) RAPID TRAVERSE RATE (X / Y / Z): 1,890 IPM (48 M/MIN) MAX CUTTING FEEDRATE: 394 IPM (10 M/MIN) GUIDEWAY TYPE: PRECISION LINEAR WAYS FLOOR SPACE REQUIRED (L X W): 134.65 IN X 82.68 IN MACHINE WEIGHT: 11,023 LBS (5,000 KG) EQUIPPED WITH: MULTI-AXIS CNC ROTARY TABLE MODULE ATTACHMENT CONFIGURED FOR INDEXABLE 4TH-AXIS PART MILLING SETUP OPERATIONS INTEGRATED SIDE TOOL MATRIX RACK CABINET HOUSING AN AUTOMATED 30-POCKET SIDE-MOUNT TOOL CHANGER MATRIX ARRAY PREMIUM MULTI-NOZZLE HIGH-VOLUME FLEXIBLE COOLANT HOSE DELIVERY ASSEMBLIES ENCLOSED INDUSTRIAL HARDWARE WORKSTATION PANEL ENCLOSURE WITH DOUBLE SLIDING DOORS AND VIEWING WINDOWS RIGHT-SIDE SWING-ARM INTEGRATED OPERATOR INTERFACE HOUSING THE FANUC 0I-MF PLUS CRT INTERFACE MODULE AND PHYSICAL AXIS ADJUSTMENT MANUAL CONTROL CONSOLE

1981 CLAUSING-COLCHESTER 8218 25" X 120" GEARED HEAD ENGINE LATHE. HEAVY-DUTY GAP BED GEARED HEAD ENGINE LATHE. SWING OVER BED: 25.0" (635 MM). DISTANCE BETWEEN CENTERS: 120.0" (3048 MM / 10 FEET). SPINDLE NOSE TYPE: D1-11 CAMLOCK. SPINDLE THROUGH BORE SIZE: 4.1" (~104 MM). MAIN SPINDLE DRIVE MOTOR: 30 HP. POWER SUPPLY REQUIREMENTS: 230 V / 460V OPTION, 3-PHASE, 60 HZ. ESTIMATED NET MACHINE WEIGHT: ~11,245 LBS (5,100 KG). EQUIPPED WITH: 18" 3-JAW CUSHMAN CLAMPING JAW POWER SCROLL CHUCK ASSEMBLY. ALORIS TOOL POST QUICK-CHANGE TOOLING BLOCK HEAD SYSTEM. LARGE-CAPACITY ADJUSTABLE MANUAL STEADY REST RING PASS-THROUGH GUIDE UNIT (MODEL REFERENCE: 25-511). TRAORI DIAL TRAVERSE TRAVEL FEED MEASUREMENT INDICATOR GAUGE MODULE UNIT. INDEPENDENT 2-POSITION SLIDING TAILSTOCK MANUAL LEVER ASSEMBLY WITH QUICK-LOCK MECHANISM. 25-535 TAPER TURNING ATTACHMENT SLIDER RAIL BAR UNIT ASSEMBLY. MULTI-LINE THREAD CUTTING PITCH DISTRIBUTION SPEED SELECTION GEAR CHART PLATE SETUP. MULTI-SEGMENT FLEXIBLE COOLANT NOZZLE DISPENSER ASSEMBLY. TUBE LENGTH AND WIDTH: 194X72 INCHES. S/N 0017DD

2000 W.F. WELLS F-1620-A CNC FULLY AUTOMATIC TWIN-POST HORIZONTAL BAND SAW. RECTANGULAR CUTTING CAPACITY (90O): 16 HIGH X 20 WIDE. ROUND CUTTING CAPACITY (90O): 16 DIAMETER. MAXIMUM MATERIAL WEIGHT CAPACITY: 5,000 LBS. BLADE DIMENSIONS: 1-1/4 WIDTH X 0.042 THICKNESS X 15 LENGTH. MAIN BLADE DRIVE MOTOR: 7.5 HP, AC VECTOR DRIVE. INFINITELY VARIABLE BLADE SPEED RANGE: 60-500 SFPM. BANDWHEEL SIZE: 20 DIAMETER CAST IRON WHEELS. VARIABLE SAWING FORCE FEED PRESSURE: ADJUSTABLE FROM 0 TO 750 LBS. BARFEED SYSTEM TYPE: FULLY HYDRAULIC, CNC-CONTROLLED SHUTTLE TYPE SINGLE SHUTTLE. PROJECTION: 0 TO 25 LENGTH. MULTI-INDEX CYCLING: UNLIMITED. AUTOMATIC NESTING FOR LONG PIECES. SHUTTLE PROJECTION POSITIONING ACCURACY: 0.002. MINIMUM REMNANT END LEFTOVER PIECE LENGTH: 4. CONTROL ARCHITECTURE: PLC PROGRAMMABLE COLOR TOUCHSCREEN CONSOLE (500+ JOB CAPACITY, AUTOMATIC KERF COMPENSATION). POWER SUPPLY CONFIGURATIONS (3-PHASE, 60 HZ): 208V (29.5 FLA) / 230V (27.0 FLA) / 460V (14.0 FLA). SHORT CIRCUIT CURRENT RATING (SCCR): 50KA. ELECTRICAL DIAGRAM NUMBER: 020452. HYDRAULIC DIAGRAM NUMBER: 019632. DEDICATED HYDRAULIC PUMP MOTOR: 2 HP. HYDRAULIC RESERVOIR TANK CAPACITY: 20 GALLONS. COOLANT SUMP TANK FLUID CAPACITY: 15 GALLONS. FLOOR-TO-TABLE BED LOADING WORK HEIGHT: 35. OVERALL MACHINE DIMENSIONS (L X W X H): 104 X 101 X 88. TOTAL MACHINE WEIGHT: APPROX. 4,000 LBS. EQUIPPED WITH: PLC COLOR TOUCHSCREEN CNC OPERATOR PANEL ARM INTERFACE, FULLY INTEGRATED HYDRAULIC DUAL-VISE MATERIAL CLAMPING SYSTEM (FRONT AND SHUTTLE VISES), HYDRAULIC BLADE TENSIONING SYSTEM MODULE, SPRING-LOADED CARBIDE INSERT BLADE GUIDE BLOCKS WITH HEAVY-DUTY ROLLER GUIDES, POWERED BLADE CLEAN-OUT BRUSH ASSEMBLY, BUILT-IN FLOOD COOLANT RECIRCULATING SYSTEM AND CHIP FLUSH CHANNEL TRAY, DUAL STEEL TWIN-COLUMN GUIDE POSTS SUPPORTING THE SAWING HEAD ASSEMBLY. S/N A3587FA1289

2008 HAAS VF-2YT CNC VERTICAL MACHINING CENTER EQUIPPED WITH RENISHAW WIRELESS PROBING SYSTEM. MODEL: VF-2BYT (EXTENDED TRAVEL YT CONFIGURATION). TABLE DIMENSIONS: 36" X 18" (914 MM X 457 MM). X-AXIS TRAVEL: 30" (762 MM). Y-AXIS TRAVEL: 20" (508 MM) - EXTENDED YT FRAME. Z-AXIS TRAVEL: 20" (508 MM). SPINDLE TAPER: CAT 40. SPINDLE DRIVE SPECIFICATION: 20 HP VECTOR DRIVE / HAAS HFD-2 DRIVE SYSTEM. SPINDLE TRANSMISSION TYPE: 2-SPEED GEAR DRIVE (HIGH-TORQUE CONFIGURATION). MAXIMUM SPINDLE SPEED: 7,500 RPM. TOOL CHANGER TYPE: 24+1 SIDE-MOUNT AUTOMATIC TOOL CHANGER SYSTEM (UPGRADED 24-POCKET CONFIGURATION). RAPID TRAVERSE RATE (X/Y/Z): 1,000 IPM (25.4 M/MIN). MAXIMUM CUTTING FEEDRATE: 650 IPM (16.5 M/MIN). RECORDED SERVO ON TIME: 1,731 HOURS 55 MINUTES 52 SECONDS. RECORDED IN MOTION TIME: 320 HOURS 29 MINUTES 23 SECONDS. RECORDED SPINDLE RUNNING TIME: 327 HOURS 45 MINUTES 26 SECONDS. POWER SUPPLY REQUIREMENTS: 360 - 480 VAC, 3-PHASE, 50/60 HZ. ENCLOSURE PROTECTION CLASS: NEMA TYPE 1 INDOOR ENCLOSURE. EQUIPPED WITH: RENISHAW WIRELESS QUICK CODE PROBING SYSTEM PACKAGE: INCLUDES (1) RENISHAW OTS TABLETOP TOOL SETTER PROBE (MADE IN UK), (1) RENISHAW OMP40-2 WIRELESS WORKPIECE MEASURING TOUCH PROBE (SERIAL NO: 09R136), AND A MATCHING BUILT-IN OPTICAL MACHINE INTERFACE RECEIVER MODULE. THROUGH-SPINDLE COOLANT SYSTEM (TSC OPTION) WITH STANDALONE HAAS AFL HIGH-PRESSURE COOLANT SYSTEM AUXILIARY FILTRATION TANK UNIT. HRT160 BRUSHLESS SERVO ROTARY TABLE DRIVE INTERFACE CONNECTION BLOCK (4TH-AXIS WIRING LAYOUT). INTERNAL HIGH-VOLTAGE ISOLATION POWER LINE TRANSFORMER UNIT. HIGH-INTENSITY INTERNAL ENCLOSURE WORKSPACE LIGHTING STRIP LAYOUT. PROGRAMMABLE COOLANT NOZZLE ASSEMBLY. HIGH-CAPACITY CHIP AUGER DISCHARGE SCREW SYSTEM. MAIN MACHINE ENCLOSURE MOUNTED SIDE PANEL. SIDE-MOUNT TOOL TRAYS. S/N 1071879

2006 HAAS VF-3BYT CNC VERTICAL MACHINING CENTER EQUIPPED WITH RENISHAW WIRELESS PROBING SYSTEM. SPECIFICATIONS: MODEL: VF-3BYT (EXTENDED TRAVEL CONFIGURATION) DATE OF MANUFACTURE: 04/2006 ORIGIN: MADE IN U.S.A. (MEEHANITE BASE CASTING STAMP: VF 3/4/5 14-9001B REV C) CONTROL SYSTEM: HAAS CNC CONTROL CONSOLE WITH INTEGRATED STATUS MONITORING TABLE DIMENSIONS: 54.0" X 25.0" (1,372 MM X 635 MM) MAXIMUM WEIGHT CAPACITY ON TABLE: 3,500 LBS (1,588 KG) X-AXIS TRAVEL: 40.0" (1,016 MM) Y-AXIS TRAVEL: 26.0" (660 MM) - EXTENDED Z-AXIS TRAVEL: 25.0" (635 MM) SPINDLE TAPER: CAT 40 SPINDLE DRIVE SPECIFICATION: 20 HP (14.9 KW) HAAS VECTOR DRIVE SYSTEM SPINDLE TRANSMISSION TYPE: 2-SPEED GEAR DRIVE (HIGH-TORQUE HEAD SETUP) MAXIMUM SPINDLE SPEED: 10,000 RPM (HIGH-SPEED MACHINING SPINDLE OPTION) TOOL CHANGER TYPE: 24+1 SIDE-MOUNT AUTOMATIC TOOL CHANGER SYSTEM RECORDED POWER ON TIME: 13,821 HOURS 14 MINUTES RECORDED CYCLE START TIME: 5,352 HOURS 38 MINUTES 46 SECONDS RECORDED FEED CUTTING TIME: 1,403 HOURS 51 MINUTES 26 SECONDS M30 PART COUNT REGISTRY: 35,998 POWER SUPPLY REQUIREMENTS: 360-480 VAC, 3-PHASE, 50/60 HZ FULL LOAD CURRENT RATING: 20 AMPS (LARGEST LOAD: 35 AMPS) SHORT CIRCUIT INTERRUPTING CAPACITY: 10,000 AMPS ENCLOSURE PROTECTION CLASS: NEMA TYPE 1 INDOOR ENCLOSURE APPROXIMATE RIGGING WEIGHT: 14,000 LBS (6,350 KG) EQUIPPED WITH: RENISHAW WIRELESS QUICK CODE PROBING SYSTEM PACKAGE: INCLUDES (1) RENISHAW TS27R TABLETOP TOOL SETTER PROBE (SERIAL NO: 5AH461, MADE IN IRELAND), (1) RENISHAW WIRELESS WORKPIECE MEASURING TOUCH PROBE (SERIAL NO: 3X8985), AND A MATCHING BUILT-IN RENISHAW OMI-S.R. OPTICAL MACHINE INTERFACE RECEIVER MODULE THROUGH-SPINDLE COOLANT SYSTEM (TSC-300A 300 PSI CONFIGURATION) WITH ATTACHED HAAS AFL HIGH-PRESSURE COOLANT SYSTEM AUXILIARY FILTRATION TANK UNIT HRT-210 CNCB 8.27" HAAS BRUSHLESS SERVO ROTARY TABLE INTERFACE PACK (4TH-AXIS DRIVE PRE-WIRING AND HARDWARE CONNECTION BLOCK) INTRN INTERNAL HIGH-VOLTAGE ISOLATION POWER LINE TRANSFORMER MODULE HIGH-INTENSITY INTERNAL ENCLOSURE WORKSPACE LIGHTING KIT (HIL HIGH INTENSITY L OPTION) PROGRAMMABLE COOLANT NOZZLE ASSEMBLY HIGH-CAPACITY CHIP AUGER DISCHARGE SCREW SYSTEM MAIN MACHINE ENCLOSURE MOUNTED SIDE PANEL SIDE-MOUNT TOOL TRAYS S/N 48558

2006 HAAS VF-3YT CNC VERTICAL MACHINING CENTER EQUIPPED WITH RENISHAW WIRELESS PROBING SYSTEM. MODEL: VF-3YT (EXTENDED TRAVEL CONFIGURATION). DATE OF MANUFACTURE: 10/06. ORIGIN: MADE IN U.S.A. CONTROL SYSTEM: HAAS CNC CONTROL CONSOLE. TABLE DIMENSIONS: 54" X 25". X-AXIS TRAVEL: 40" (1016 MM). Y-AXIS TRAVEL: 26" (660 MM). Z-AXIS TRAVEL: 25" (635 MM). SPINDLE TAPER: 40 TAPER. SPINDLE DRIVE SPECIFICATION: 20 HP (14.9 KW) VECTOR DUAL DRIVE (Y-DELTA WINDING CONFIGURATION). SPINDLE TRANSMISSION TYPE: 2-SPEED GEARBOX. MAXIMUM SPINDLE SPEED: 10,000 RPM. HSM HIGH SPEED MACHINING SPINDLE. TOOL CHANGER CAPACITY: 24+1 SIDE-MOUNT TOOL CHANGER. RECORDED POWER ON TIME: 16,900 HOURS 44 MINUTES. RECORDED CYCLE START TIME: 4,564 HOURS 07 MINUTES 18 SECONDS. RECORDED FEED CUTTING TIME: 1,570 HOURS 34 MINUTES 00 SECONDS. M30 PART COUNT REGISTRY: 21,264. POWER SUPPLY REQUIREMENTS: 360-480 V, 3-PHASE, 50/60 HZ. FULL LOAD CURRENT RATING: 20 AMPS (LARGEST LOAD: 35 AMPS). SHORT CIRCUIT INTERRUPTING CAPACITY: 10,000 AMPS. ENCLOSURE PROTECTION CLASS: NEMA TYPE 1 INDOOR ENCLOSURE. EQUIPPED WITH: RENISHAW WIRELESS QUICK CODE PROBING SYSTEM PACKAGE: INCLUDES (1) RENISHAW TS27R TABLETOP TOOL SETTER PROBE (MADE IN UK), (1) RENISHAW OMP40 WIRELESS WORKPIECE MEASURING TOUCH PROBE (SERIAL NO: 3J0121, MADE IN UK), AND AN INTEGRATED RENISHAW OMI-S.R. OPTICAL MACHINE INTERFACE RECEIVER MODULE. HAAS AFL HIGH PRESSURE COOLANT SYSTEMS. AUXILIARY FILTRATION SYSTEM TANK SETUP (SPECIALLY STRUCTURED FOR THROUGH-SPINDLE COOLANT AUXILIARY FILTRATION LAYOUTS). TR1605XB 6.3" HAAS BRUSHLESS TRUNNION ROTARY TABLE INTERFACE PRE-WIRING PACKAGE (5TH-AXIS DRIVE AND WIRING LAYOUT). INTRN INTERNAL HIGH-VOLTAGE ISOLATION POWER LINE TRANSFORMER MODULE (440 V SETUP). PROGRAMMABLE COOLANT NOZZLE ASSEMBLY. HIGH-CAPACITY CHIP AUGER DISCHARGE SCREW SYSTEM. HIGH-INTENSITY INTERNAL ENCLOSURE WORKSPACE LIGHTING KIT (HIL HIGH INTENSITY L OPTION). MAIN MACHINE ENCLOSURE MOUNTED SIDE PANEL. SIDE-MOUNT TOOL TRAYS. S/N 1052413

2012 YIDA PRECISION ML-850 CNC SLANT BED TURNING CENTER LATHE. CONTROL SYSTEM: FANUC 0I-TC CONTROL WITH 10.4" COLOR MONITOR. CHUCK SIZE: 15" HYDRAULIC KITAGAWA CHUCK UPGRADE. MAXIMUM TURNING DIAMETER: 600 MM (23.62"). MAXIMUM TURNING LENGTH: 1270 MM (50"). WORKING SWING OVER BED: 850 MM (33.46"). DISTANCE BETWEEN CENTERS: 1520 MM (59.84"). BED SLANT ANGLE: 45. MAXIMUM SPINDLE SPEED: 2000 RPM. SPINDLE MOTOR: 50 HP HIGH-TORQUE FANUC SPINDLE MOTOR. SPINDLE NOSE: A2-11. SPINDLE THROUGH BORE / BAR CAPACITY: 131 MM (5.2") / 91 MM (3.6"). X / Z-AXIS MAXIMUM TRAVEL RANGE: 350 MM (13.79") / 1350 MM (53.15"). X / Z-AXIS RAPID TRAVERSE SPEED: 20 / 12 M/MIN. TURRET TOOL CAPACITY TYPE: 12-STATION HYDRAULIC TURRET (UPGRADED FROM 10-STATION). TAILSTOCK QUILL TYPE: MANUAL TAILSTOCK WITH MT NO. 4 PROGRAMMABLE QUILL WITH CENTER. TAILSTOCK QUILL DIAMETER / STROKE: 125 MM (4.92") / 160 MM (6.3"). HYDRAULIC SYSTEM MOTOR: 3 KW. COOLANT MOTOR / PUMP SYSTEM: 3 HP HIGH-CAPACITY COOLANT PUMP UPGRADE. RECORDED RUN TIME ODOMETER: 25,671 HOURS 10 MINUTES. POWER SUPPLY REQUIREMENTS: 3-PHASE AC, 220 V. NET MACHINE WEIGHT: 11,820 KG (26,059 LBS). FLOOR FOOTPRINT DIMENSIONS (W X D X H): 5675 MM X 2190 MM X 2234 MM (223.4" X 86.2" X 87.9"). INTERNAL DRIVE COMPONENT SYSTEMS: FANUC IF 22/3000 AC SERVO MOTOR (MODEL A06B-0247-B101, 4 KW, 22 NM, 3-PHASE, 200-240V), FANUC II 30/6000 AC SPINDLE MOTOR (MODEL A06B-1412-B250), FANUC IPS 55 POWER SUPPLY MODULE (MODEL A06B-6140-H055, INPUT: 200-240V, OUTPUT: 283-339V), FANUC ISP 45 SPINDLE AMPLIFIER MODULE (MODEL A06B-6111-H045#H550), AND FANUC ISV 80/80 DUAL AXIS SERVO AMPLIFIER MODULE (MODEL A06B-6114-H209). EQUIPPED WITH: STANDALONE SQUARE D SORGEL 45 KVA THREE PHASE GENERAL PURPOSE ISOLATION TRANSFORMER (CAT NO: EE45T151HCT, H.V.: 480Y/277 54 AMPS, L.V.: 240 104 AMPS, 60 HZ, WT: 368 LBS, CLASS AA ENCLOSURE TYPE 2). MANUAL STEADY REST SYSTEM UPGRADE (CAPACITY: 150 MM-300 MM). FACTORY CHAIN-TYPE CHIP CONVEYOR AND OFFLOAD DISCHARGE SYSTEM WITH INTEGRATED BUCKET. COMPLETE SET OF LEVELING BOLTS, PADS, AND FOUNDATION HARDWARE. FACTORY INSTRUCTION MANUAL DOCUMENTS, ELECTRICAL CIRCUIT DIAGRAMS, AND OPERATIONAL PARTS BOOKS. S/N K30001

2006 HAAS TL-2 CNC/MANUAL TOOLROOM LATHE WITH DORIAN TOOL POST QUICK-CHANGE. SWING OVER FRONT APRON (BED): 16.0 INCH. SWING OVER CROSS SLIDE: 11.1 INCH. DISTANCE BETWEEN CENTERS: 48.0 INCH. MAXIMUM CUTTING / TURNING DIAMETER: 16.0 INCH. MAXIMUM CUTTING / TURNING LENGTH: 48.0 INCH. SPINDLE NOSE TYPE: A2-6. SPINDLE THROUGH BORE (BAR CAPACITY): 3.00 INCH. SPINDLE DRIVE RATING: 12 HP (8.9 KW). SPINDLE SPEED RANGE: 0 TO 1,800 RPM. X-AXIS MAXIMUM TRAVEL RANGE: 8.0 INCH. Z-AXIS MAXIMUM TRAVEL RANGE: 48.0 INCH. X / Z-AXIS MAXIMUM THRUST CAPACITY: 3,096 LBS (13,772 N) / 2,340 LBS (10,409 N). RAPID TRAVERSE RATES (X & Z): 75 IPM (1.9 M/MIN). RECORDED SERVO ON TIME: 17,760 HOURS 30 MINUTES 29 SECONDS. RECORDED IN MOTION TIME: 2,501 HOURS 45 MINUTES 10 SECONDS. RECORDED SPINDLE RUNNING TIME: 2,723 HOURS 11 MINUTES 04 SECONDS. TAILSTOCK CENTER TAPER: MT NO. 4. POWER SUPPLY REQUIREMENTS (3-PHASE CONFIGURED): 208/240 V, 3-PHASE, 25 A, 50/60 HZ. NET MACHINE WEIGHT: ~ 4,600 LBS (2,087 KG). MAXIMUM OPERATING FLOOR DIMENSIONS (L X W X H): 99 INCH X 68 INCH X 78 INCH (2515 MM X 1727 MM X 1981 MM). EQUIPPED WITH: DORIAN TOOL POST QUICK-CHANGE TOOLING BLOCK ASSEMBLY UNIT, 10 INCH MANUAL 3-JAW SCROLL CHUCK WITH MATCHING INNER JAWS, FACTORY CHIP ENCLOSURE SPLASH GUARD FRAME HOUSING PANEL WITH VIEWPORT, VIEWING WINDOW, MANUAL SLIDING TOOLROOM TAILSTOCK ASSEMBLY UNIT, MANUAL STEADY REST BASE PASS-THROUGH BLOCK ASSEMBLY, INTEGRATED COOLANT PUMP KIT AND FLUID TANK RESERVOIR SYSTEM, SPINDLE CHUCK SAFETY GUARD SHIELD HOOD FLIP DEVICE, INTERNAL WORK LIGHT ASSEMBLY KIT FOR TOOLROOM LATHE, ENCLOSURE EXTENDED INTERNAL MEMORY ARRAY MODULE (1MB UPGRADE) ALONGSIDE INTEGRATED 3.5 INCH FLOPPY DISC DRIVE INTERFACE PANEL. S/N 3074698

2003 HAAS VF-1B CNC VERTICAL MACHINING CENTER EQUIPPED WITH RENISHAW TOOL SETTER. SPECIFICATIONS: MODEL: VF-1B (VALUE OPTION PACKAGE D / VOP-D CONFIGURATION) DATE OF MANUFACTURE: 05/2003 ORIGIN: MADE IN U.S.A. (MEEHANITE BASE CASTING STAMP: 14-7001BA / K11) CONTROL SYSTEM: HAAS CNC CONTROL CONSOLE WITH BRUSHLESS SERVOS TABLE SIZE: 26" X 14" (660 MM X 356 MM) MAXIMUM WEIGHT CAPACITY ON TABLE: 3,000 LBS (1,361 KG) SPINDLE NOSE TO TABLE DISTANCE: 4" TO 24" (102 MM - 610 MM) X-AXIS TRAVEL: 20" (508 MM) Y-AXIS TRAVEL: 16" (406 MM) Z-AXIS TRAVEL: 20" (508 MM) SPINDLE TAPER: CAT-40 SPINDLE DRIVE SPECIFICATION: 20 HP (14.9 KW) VECTOR DRIVE / SPINDLE DRIVE 69-1000 SPINDLE TRANSMISSION TYPE: 2-SPEED GEAR BOX (GEARBOX 30-5500F WITH LINCOLN/LEESON/BALDOR MOTOR COMPATIBILITY) MAXIMUM SPINDLE TORQUE: 250 FT-LBS @ 450 RPM MAXIMUM SPINDLE SPEED: 7,500 RPM TOOL CHANGER TYPE: 20-STATION CAROUSEL TYPE AUTOMATIC TOOL CHANGER RAPID TRAVERSE RATE (X/Y/Z): 1,000 IPM (25.4 M/MIN) MAXIMUM CUTTING FEEDRATE: 650 IPM (16.5 M/MIN) RECORDED SERVO TIME: 12,965 HOURS 10 MINUTES 09 SECONDS RECORDED MOTION TIME: 2,945 HOURS 06 MINUTES 20 SECONDS RECORDED SPINDLE TIME: 3,147 HOURS 44 MINUTES 22 SECONDS POWER SUPPLY REQUIREMENTS: 360 - 480 VOLTS, 3-PHASE, 50/60 HZ FULL LOAD CURRENT RATING: 20 AMPS (LARGEST LOAD: 35 AMPS) SHORT CIRCUIT INTERRUPTING CAPACITY: 10,000 AMPS (WIRING DIAGRAM 96 / 8000) ENCLOSURE PROTECTION CLASS: NEMA TYPE 1 INDOOR ENCLOSURE MACHINE WEIGHT: ~ 8,000 LBS (3,629 KG) APPROXIMATE FLOOR SPACE FOOTPRINT REQUIRED: 101" W X 99" D X 101" H EQUIPPED WITH: RENISHAW TS27R TABLETOP TOOL SETTER PROBE (SERIAL NO: 3T9819, MADE IN UK) AND AN INTEGRATED RENISHAW OMI-S.R. OPTICAL MACHINE INTERFACE RECEIVER MODULE (SERIAL NO: 3X2860) HIGH-VOLTAGE ISOLATION POWER LINE TRANSFORMER MODULE (HI VOLT. X-FRMR) PROGRAMMABLE COOLANT NOZZLE SYSTEM HIGH-CAPACITY CHIP AUGER SYSTEM EXTENDED MEMORY STORAGE CONFIGURATION (1MB UPGRADE) 4TH-AXIS DRIVE PRE-WIRING AND INTERFACE CONNECTION PACKAGE (BRUSH/BRUSHLESS SELECTABLE) QUICK CODE PROGRAMMING SYSTEM MACRO CODE AND COORDINATE ROTATION AND SCALING SOFTWARE OPTIONS RIGID TAPPING SAFETY CIRCUIT OPTION S/N 31593

1992 TOYODA FH45B CNC HORIZONTAL MACHINING CENTER EQUIPPED WITH M&H RADIO-WAVE TOUCH PROBE. SPECIFICATIONS: MODEL: FH45B DATE OF MANUFACTURE: 1992.9 CONTROL SYSTEM: FANUC SERIES 15-M CONTROLLER CONSOLE PALLET DIMENSIONS: 450 MM X 450 MM INDEXING ANGLE OF ROTARY TABLE: 5 PALLET HEIGHT: 1100 MM TABLE TRAVEL (X-AXIS): 600 MM SPINDLE HEAD TRAVEL (Y-AXIS): 560 MM COLUMN TRAVEL (Z-AXIS): 500 MM DISTANCE BETWEEN SPINDLE END AND TABLE CENTER: 125 MM - 625 MM DISTANCE BETWEEN SPINDLE CENTER AND TABLE TOP SURFACE: 50 MM - 710 MM RAPID FEEDRATE: 20 MM/MIN CUTTING FEEDRATE: 1 MM/MIN - 8,000 MM/MIN SPINDLE SPEED: 60 RPM - 6,000 RPM SPINDLE NOSE TAPER: MAS I TYPE P40T (ISO R297 TAPER NO. 40 / MAS BT40) NUMBER OF TOOLS CAPACITY: 32 PCS TOOL DIMENSIONS (DIAMETER X LENGTH): MAX. 75 MM X 350 MM MAX. TOOL WEIGHT: 8 KG TOOL CHANGE TIME (TOOL-TO-TOOL): 1.5 SECONDS POSITIONING ACCURACY: 0.003 MM / TOTAL LENGTH REPEATABILITY: 0.0015 MM LOADABLE WEIGHT ON PALLET: 500 KG ALLOWABLE THRUST LOAD: 9,800 N (1,000 KGF) HIGH-SPEED SPINDLE OPTION: 100 RPM - 10,000 RPM / 200 RPM - 20,000 RPM NUMBER OF TOOLS OPTIONS: 64 TOOLS POWER SUPPLY REQUIREMENTS: 3-PHASE, 200 V, 60 HZ RATED CAPACITY: 51 KVA CONTROL CIRCUIT VOLTAGE: AC 100 V / DC 24 V RECORDED POWER ON TIME: 9,863 HOURS 46 MINUTES 05 SECONDS RECORDED OPERATING TIME: 8,279 HOURS 48 MINUTES 30 SECONDS RECORDED CUTTING TIME: 2,883 HOURS 14 MINUTES 25 SECONDS RECORDED PARTS COUNT: 12,117 FLOOR AREA: 2,460 MM X 3,940 MM NET MACHINE WEIGHT: 9,000 KG (19,841 LBS) EQUIPPED WITH: M&H RADIO-WAVE TOUCH PROBE RWP20.41 SYSTEM HARDWARE WITH ORIGINAL MULTI-LANGUAGE OPERATING INSTRUCTION MANUAL BOOKLET (TRADE NAME: RADIO-WAVE PROBE, MODEL NO: 38.00, IC: 5782A-38RWP433, M&H PART NO. #0028, 38.70, B G10 D, Z 14 D, 43 FW) BARNES INTERNATIONAL, INC. HYDRAULIC SYSTEM UNIT (MODEL: BD 112 H, SERIAL NO: RD 327, FULL LOAD CURRENT: 21.7 AMP, LARGEST MOTOR CURRENT: 7.8 AMP, 208 V, 3-PHASE, 60 HZ) FANUC AIR BLOW SPARK SUPPRESSOR/FILTER UNIT (DWG NO. A40L-0001-0328, A06B-6066-H500, RATING: 400W AT 2M/S AIR BLOW) INTEGRATED STATUS TOWER LIGHT SETUP DUAL PALLET CHANGER STATION BASE CONFIGURATION S/N NM7378

HAAS TR160H HIGH-SPEED DUAL-AXIS CNC TRUNNION ROTARY TABLE (5-AXIS) EQUIPPED WITH BISON CHUCK. MODEL: TR160H / STR160H (HIGH-SPEED DUAL-AXIS TRUNNION CONFIGURATION). PLATTER DIAMETER: 6.30" (160 MM). MAXIMUM WORKPIECE CAPACITY WEIGHT ON PLATTER: 110 LBS (49.9 KG). MAXIMUM PART SWING TRAVEL CLEARANCE: 17.5" (445 MM). PLATTER TOOLING CONFIGURATION: 6 STANDARD T-SLOTS SPACED AT 60 INTERVALS. TILT (A-AXIS) MAXIMUM FEED SPEED: 80 / SECOND. TILT (A-AXIS) MAXIMUM TORQUE OUTPUT: 150 FT-LB (203 NM). TILT (A-AXIS) PNEUMATIC BRAKE HOLD TORQUE: 200 FT-LB @ 100 PSI (271 NM). TILT (A-AXIS) MECHANICAL GEAR RATIO: 63:1. TILT (A-AXIS) INDEXING ACCURACY: 25 ARC-SECONDS. ROTARY (B-AXIS) MAXIMUM FEED SPEED: 100 TO 104 / SECOND. ROTARY (B-AXIS) MAXIMUM TORQUE OUTPUT: 112 FT-LB (152 NM). ROTARY (B-AXIS) PNEUMATIC BRAKE HOLD TORQUE: 100 FT-LB @ 100 PSI (136 NM). ROTARY (B-AXIS) MECHANICAL GEAR RATIO: 63:1. ROTARY (B-AXIS) INDEXING ACCURACY: 15 ARC-SECONDS. INTEGRATED SERVO MOTOR PROFILE: YASKAWA SIGMA-1 PREMIUM BRUSHLESS AC SERVO DRIVES. FACTORY TARGET BACKLASH MARGIN: 30 ARC-SECONDS. SYSTEM MACHINE INTEGRATION: REQUIRES FULL 4TH & 5TH AXIS HAAS INTERNAL SOFTWARE/AUXILIARY SERVO DRIVE CONFIGURATION LAYOUT. EQUIPPED WITH: BISON SET-TRU PRECISION MICRO-ADJUSTABLE 3-JAW SELF-CENTERING SCROLL CHUCK (MODEL: 3565-5 / CODE: 7-866-0500 / MADE IN POLAND) WITH 2-PIECE HARD REVERSIBLE JAWS. S/N 905101

2006 HAAS VF-2B CNC VERTICAL MACHINING CENTER WITH 2-SPEED GEARBOX AND 4TH-AXIS ROTARY INDEXER. X-AXIS TRAVEL: 30" Y-AXIS TRAVEL: 16" Z-AXIS TRAVEL: 20". SPINDLE NOSE TO TABLE (MIN-MAX): 4" TO 24". TABLE SIZE: 36" X 14". MAX WEIGHT ON TABLE: 3,000 LBS. SPINDLE TAPER: CAT 40. SPEED RANGE: 0 TO 7,500 RPM. SPINDLE MOTOR: 20 HP VECTOR DRIVE. DRIVE MECHANISM: 2-SPEED GEARBOX. TOOL CHANGER (ATC) TYPE / CAPACITY: 24+1 STATION SIDE-MOUNT TOOL CHANGER. MAX TOOL DIAMETER (FULL / EMPTY ADJACENT POCKETS): 3.0" / 6.0". MAX TOOL WEIGHT: 12 LBS. X/Y/Z RAPID TRAVERSE RATE: 1,000 IPM. MAX CUTTING FEEDRATE: 300 IPM. AIR REQUIREMENTS: 4 CFM AT 100 PSI. FLOOR FOOTPRINT: 88" L-R X 90" F-B X 96" H. NET MACHINE WEIGHT: APPROX. 7,716 LBS. EQUIPPED WITH: HAAS 4TH-AXIS ROTARY INDEXER/COLLET TABLE CHUCK MODULE, RENISHAW OMI-2T OPTICAL MACHINE TOOL PROBER RECEIVER UNIT AND TABLE-MOUNTED TOOL SETTER PROBE ASSEMBLY, HEAVY-DUTY HAAS 24-STATION HIGH-SPEED SIDE-MOUNT TOOL CHANGER CAROUSEL ARRAY, THROUGH-SPINDLE COOLANT (TSC) DELIVERY CONFIGURATION WITH HIGH-PRESSURE CAPABILITY LINES. S/N: 49385

2007 HAAS SL-20B CNC SLANT BED TURNING CENTER LATHE WITH HIGH-PRESSURE COOLANT SYSTEM. MODEL: SL-20B. DATE OF MANUFACTURE: 08/07. CONTROL SYSTEM: HAAS INTUITIVE PROGRAMMING CNC SYSTEM CONTROL CONSOLE. SPINDLE DRIVE MOTOR: 30 HP (22.4 KW) VECTOR DUAL DRIVE SPINDLE UPGRADE. SPINDLE NOSE / BORE SIZE: A2-6 / 3.0". MAXIMUM SPINDLE SPEED: 3,400 RPM. MAXIMUM BAR CAPACITY (BIG BORE): 2.50" (65 MM). MAXIMUM CUTTING / TURNING DIAMETER: 10.3" (262 MM). MAXIMUM CUTTING / TURNING LENGTH: 20.0" (508 MM). MAXIMUM SWING OVER BED: 23.0" (584 MM). X-AXIS TRAVEL: 8.45" (215 MM). Z-AXIS TRAVEL: 20.0" (508 MM). TURRET TOOL CAPACITY: 10-STATION TURRET DRUM BLOCK ASSEMBLY. RECORDED POWER ON TIME: 8,222 HOURS 45 MINUTES 57 SECONDS. RECORDED CYCLE START TIME: 7,557 HOURS 45 MINUTES 12 SECONDS. RECORDED FEED CUTTING TIME: 5,685 HOURS 24 MINUTES 29 SECONDS. M30 PART COUNT REGISTRY: 21 (CURRENT SHIFT CYCLE RESET). POWER SUPPLY REQUIREMENTS: 208/230 V, 3-PHASE, 50/60 HZ. FULL LOAD CURRENT RATING: 80 AMPS. SHORT CIRCUIT INTERRUPTING CAPACITY: 10,000 AMPS. ENCLOSURE PROTECTION CLASS: NEMA TYPE 1 INDOOR ENCLOSURE. APPROXIMATE MACHINE WEIGHT: 9,000 LBS (4,082 KG). EQUIPPED WITH: HAAS AFL HIGH PRESSURE COOLANT SYSTEMS AUXILIARY FILTRATION SYSTEM TANK SETUP. ATS WORKHOLDING TRUE LENGTH QUICK-CHANGE COLLET CHUCK SYSTEM ADAPTER SLEEVE UNIT (MODEL: QC6500A-X, TYPE: QC65 TRUE LENGTH ASSY, DATE: 06-29-07). HENNIG INC. METAL HINGED TRACK BELT CHIP CONVEYOR ASSEMBLY UNIT (MODEL: SL20 30-6636D REV A, SERIAL NO: 18663 06/07). INTEGRATED AUTOMATIC HAAS TOOL PRESETTER ARM PROBE SYSTEM. HIGH-INTENSITY INTERNAL ENCLOSURE WORKSPACE LIGHTING STRIP LAYOUT. EXTERNAL HIGH VOLTAGE ISOLATION POWER LINE TRANSFORMER BLOCK. BRUSHLESS MAGAZINE BAR FEEDER INTERFACE CONNECTION BRUSHLESS BAR FEED COMMUNICATION INTERFACE JUNCTION BLOCK. COOLANT SPLASH ENCLOSURE GUARDING BASE FRAME WITH VISUAL ACRYLIC VIEWPORT WINDOW. REMOTE MANUAL PULSE GENERATOR JOG HANDLE PENDANT OPTION HOOK DEVICE. S/N 3078475

HAAS HRT210HS HIGH-SPEED BRUSHLESS CNC ROTARY TABLE SYSTEM WITH PNEUMATIC WORKHOLDING QUICK-CHANGE RECEIVER & TOMBSTONES SPECIFICATIONS: MODEL: HRT 210HS (HIGH-SPEED BRUSHLESS VARIANT) PLATTER DIAMETER SIZE: 210 MM (8.27") MAXIMUM SPINDLE TORQUE OUTPUT: 210 FT-LB (285 NM) MAXIMUM SPINDLE INDEXING ROTATION SPEED: UP TO 130/SEC POSITIONING BACKLASH TOLERANCE: 45 ARC-SEC MAXIMUM SPINDLE RUNOUT DEVIATION: 0.0005" (0.013 MM) CENTER HEIGHT PROFILE: 6.000" 0.001" (152.4 MM 0.025 MM) PLATTER TOOLING LAYOUT: 6 STANDARD T-SLOTS SPACED AT 60 INTERVALS INTEGRATED PNEUMATIC BRAKE TORQUE CAPACITY: 200 FT-LB @ 100 PSI (271 NM @ 6.9 BAR) WORM GEAR DIAMETER SETUP: 6.3" (160 MM) WITH A 90:1 GEAR RATIO (1:1 TIMING BELT CONFIGURATION) OPERATING AMBIENT TEMPERATURE RATING: 100F (38C) MAXIMUM THRESHOLD POWER SUPPLY DRIVE CONSUMPTION: 115 VAC 10% @ 15 A COMPRESSED AIR PRESSURE REQUIREMENT: 120 PSI (8.3 BAR) MAXIMUM CAPACITY TABLE UNIT WEIGHT: 165 LBS (74.8 KG) EQUIPPED WITH: HAAS PNEUMATIC WORKHOLDING QUICK-CHANGE RECEIVER & TOMBSTONES (GENUINE HAAS AUTOMATION, INC. MADE IN U.S.A.) MULTI-JAW 3-JAW SET-TRUE PRECISION ADJUSTING MANUAL CHUCK MODULE (MODEL: SET-TRU 5609 05) WITH BACKPLATE INDEXING HARDWARE (2) EXPANDABLE MULTI-SIDED ALUMINUM/BRASS TOMBSTONE FIXTURE BLOCKS

HAAS SHRT160H HIGH-SPEED BRUSHLESS CNC ROTARY TABLE SYSTEM WITH 6-INCH 3-JAW CHUCK. MODEL: SHRT160H (HIGH-SPEED SERVO BRUSHLESS VARIANT). PLATTER DIAMETER SIZE: 6.30-INCH (160 MM). CENTER HEIGHT PROFILE: 5.000-INCH (127.0 MM). PLATTER DESIGN ARCHITECTURE: 6-SLOT T-STYLE FACEPLATE ARRAY CONFIGURED AT 60 INTERVALS. MAXIMUM WORKPIECE LOAD CAPACITY (UNSUPPORTED): 45 LBS (20.4 KG). MAXIMUM WORKPIECE LOAD CAPACITY (WITH TAILSTOCK SUPPORT): 90 LBS (40.8 KG). MAXIMUM PLATTER INDEXING ROTATION SPEED: 130 PER SECOND. MAXIMUM TORQUE OUTPUT: 150 FT-LBF (203 NM). INTEGRATED PNEUMATIC BRAKE TORQUE CAPACITY: 100 FT-LBF @ 100 PSI (136 NM @ 6.9 BAR). WORM GEAR MECHANISM RATIO / TIMING LINK: 63:1 GEAR RATIO WITH A 2:1 TIMING LINK DRIVE STEP. MAXIMUM STRUCTURAL RUNOUT DEVIATION: 0.0005-INCH (0.013 MM). INDEXING PRECISION ACCURACY: 15 ARC-SECONDS. REPEATABILITY MARGIN: 10 ARC-SECONDS. BACKLASH TOLERANCE LIMIT: 30 ARC-SECONDS. UTILITY SUPPLY LINE REQUIREMENTS: 100-150 PSI CLEAN, DRY SHOP AIR. NETWORK CONNECTION. NET UNIT MECHANICAL WEIGHT: 140 LBS (63.5 KG). EQUIPPED WITH: 6-INCH 3-JAW MANUAL SCROLL CHUCK ASSEMBLY UNIT WITH STEPPED HARD JAWS MOUNTED TO THE ROTARY PLATTER FACE. BACKSIDE PASS-THROUGH SPINDLE BORE PORT CHANNEL LAYOUT. ATTACHED DUAL-CABLE BRUSHLESS ENCODER COMMUNICATION SIGNAL AND SERVO POWER LINE UMBILICAL WIRE HARNESS PACK. S/N 165247

1997 CLAUSING-COLCHESTER 15" X 50" GAP BED ENGINE LATHE. MODEL: 8043. PRECISION MANUAL GAP BED ENGINE LATHE. SWING OVER BED: 15.75" (400 MM). SWING IN GAP: 23.0". DISTANCE BETWEEN CENTERS: 50.0" (1270 MM). BEDWAY CROSS WIDTH: 12.5". SPINDLE NOSE TYPE: D1-6 CAMLOCK. SPINDLE NOSE INTERNAL TAPER: #4 MORSE TAPER (MT). SPINDLE BORE CAPACITY: 2.12" (~54 MM). MAIN SPINDLE DRIVE MOTOR: 7.5 HP. POWER SUPPLY REQUIREMENTS: 460 V, 3-PHASE, 60 HZ. NUMBER OF AVAILABLE MECHANICAL SPEEDS: 16 STEPS GEARED HEAD. SPINDLE SPEED RANGE: 25 - 2,000 RPM. LONGITUDINAL CARRIAGE FEED RANGE: 0.0014" TO 0.048" PER REVOLUTION. INCH THREADING CHOICES CAPACITY: 56 OPTIONS (2 TO 56 TPI). METRIC THREADING CHOICES CAPACITY: 51 OPTIONS (0.2 TO 14 MM PITCH). TAILSTOCK QUILL TAPER / STROKE TRAVEL: #5 MORSE TAPER (MT) / 5.5". NET SYSTEM MACHINE WEIGHT: ~3,500 LBS (1,588 KG). FLOOR SPACE REQUIRED (L X W X H): 99" X 44" X 63". EQUIPPED WITH: 10" 3-JAW MANUAL CLAMPING JAW SCROLL CHUCK ASSEMBLY, ALORIS TOOL POST QUICK-CHANGE TOOLING HEAD ASSEMBLY, LARGE CLEAR FRAME FLIP-UP OPERATOR OVERHEAD WORK SAFETY SHIELD, TRAORI DIAL CARRIAGE TRAVERSE TRAVEL LINEAR MEASUREMENT DIAL GAUGE ATTACHMENT, REAR ENCLOSURE SPLASH GUARD AND SHEET METAL WALL SHIELD FRAME HOUSING PANELS, SPINDLE CHUCK SAFETY GUARD SHROUD FLIP DEVICE. S/N GT0171 / 0182

2006 YIDA PRECISION ML-300 CNC SLANT BED TURNING CENTER LATHE. CONTROL SYSTEM: FANUC SERIES 0I-TC CONTROLLER CONSOLE CHUCK SIZE: 8" KITAGAWA 3-JAW POWER CHUCK (MODEL B-208-A6, MASS 22.6 KG) WORKING SWING OVER BED: 600 MM (23.6") MAXIMUM TURNING DIAMETER: 300 MM (11.8") MAXIMUM TURNING LENGTH: 600 MM (23.6") BED SLANT ANGLE: 45 X-AXIS TRAVEL: 240 MM (9.44") Z-AXIS TRAVEL: 600 MM (23.6") SPINDLE NOSE / TAPER: ASA A2-6 / 1/20 TAPER BORE THROUGH SPINDLE: 77 MM (3.03") SPINDLE SPEED: 402000 RPM AC SPINDLE MOTOR: 11 / 15 KW CONTINUOUS TURRET TYPE CONFIGURATION: VERTICAL 12-STATION TURRET BLOCK TOOL HOLDER CAPACITY: 5 TURNING TOOL HOLDERS, 5 BORING BAR HOLDERS EXTERNAL TOOL SHANK SIZE: METRIC 25 MM X 25 MM (1" X 1") TAILSTOCK QUILL DIAMETER: 85 MM (3.34") TAILSTOCK TRAVEL / QUILL STROKE: 465 MM (18.3") / 150 MM (5.9") TAILSTOCK TAPER: MT NO. 4 TAPER RECORDED RUN TIME ODOMETER: 1,528 HOURS 50 MINUTES RECORDED PARTS COUNT: 46,753 MACHINE ACCURACY POSITIONING (X/Z): 0.015/100 MM / 0.025/300 MM MACHINE ACCURACY REPEATABILITY (X/Z): 0.003 MM / 0.003 MM POWER SUPPLY REQUIREMENTS: 220 V / 60 HZ / 3-PHASE AC (TOTAL CAPACITY: 26 KW) NET MACHINE WEIGHT: 4,800 KG (10,570 LBS) FLOOR SPACE FOOTPRINT AREA (L X W X H): 4500 MM X 1792 MM X 1842 MM (177.1" X 70.5" X 72.5") INTERNAL DRIVE COMPONENT SYSTEMS: FANUC ISV 80/80 DUAL AXIS SERVO AMPLIFIER MODULE (MODEL A06B-6114-H209), FANUC ISP 22 SPINDLE AMPLIFIER MODULE (MODEL A06B-6111-H022#H550), AND FANUC IPS 26 POWER SUPPLY MODULE (MODEL A06B-6110-H026) EQUIPPED WITH: HABOR HEAT PIPE HEAT EXCHANGER CABINET COOLER UNIT (MODEL: HPW-35AR, SERIAL NO: 154947, 1 220V, 50/60HZ) INTEGRATED RIGHT-HAND SIDE METAL CHAIN-TYPE CHIP CONVEYOR OFFLOAD DISCHARGE CHANNEL TRACKING UNIT HYDRAULIC SYSTEM PRESSURE PUMP MOTOR STATION (1.5 KW / 2 HP) INTEGRATED FLOOD COOLANT PUMP MOTOR SYSTEM (180W / 1/4 HP) COMPLETE STACK OF FACTORY OPTION REFERENCE BOOKLETS, ELECTRICAL LAYOUT SCHEMATICS, AND YELLOW FANUC SERIES 0I-MODEL C OPERATOR PARAMETER MANUALS S/N Q10158

2008 YANG ML-350 CNC SLANT BED TURNING CENTER LATHE. SPECIFICATIONS: MODEL: ML-350 DATE OF MANUFACTURE: 10/2008 CONTROL SYSTEM: FANUC SERIES 0I-TC CONTROLLER CONSOLE CHUCK SIZE: 10 INCH HYDRAULIC KITAGAWA CHUCK (MODEL B-210) SWING OVER SLANT / BED: 580 MM (22.83 INCH) MAXIMUM MACHINING DIAMETER: 410 MM (16.14 INCH) MAXIMUM MACHINING LENGTH: 700 MM (27.55 INCH) SLANT ANGLE OF BED: 45 X-AXIS MAXIMUM TRAVEL RANGE: 235 MM (9.25 INCH) Z-AXIS MAXIMUM TRAVEL RANGE: 700 MM (27.55 INCH) X / Z-AXIS RAPID TRAVERSE RATES: 30 M/MIN (1181.1 IN/MIN) X / Z-AXIS SERVO MOTORS: 3 KW / 12 NM ( 12I) SPINDLE NOSE TYPE: ASA A2-8 SPINDLE TAPER: 1/20 TAPER DIAMETER OF SPINDLE BORE / DRAW BAR BORE: 105 MM (3.58 INCH) / 91 MM (4.13 INCH) SPINDLE MOTOR: 15 / 18.5 KW ( 30IP/6000 RPM) CONTINUOUS / 30-MIN RATING MAXIMUM SPINDLE SPEED: 3,000 RPM TURRET TOOL CAPACITY TYPE: 12-STATION HYDRAULIC TURRET (VERTICAL BLOCK CONFIGURATION) TOOL HOLDER SLOTS: ACCOMMODATES 40 MM / 1.75 INCH BORING BAR HOLDERS TOOL SHANK SIZE: METRIC 25 MM / INCH 1 INCH TAILSTOCK QUILL DIAMETER: 85 MM (3.34 INCH) TAILSTOCK TRAVEL / QUILL STROKE: 550 MM (21.65 INCH) / 150 MM (5.9 INCH) TAILSTOCK CENTER TAPER: MT NO. 4 RECORDED RUN TIME ODOMETER: 2,625 HOURS 37 MINUTES RECORDED PARTS COUNT: 4,894 POWER SUPPLY REQUIREMENTS: 220 V / 50 AMPS / 3-PHASE, 50/60 HZ SHORT CIRCUIT BREAKING CAPACITY: 10 KA ENCLOSURE PROTECTION CLASS: NEMA TYPE 1 INDOOR ENCLOSURE NET MACHINE WEIGHT (WITH CONVEYOR): 5,700 KG (12,566 LBS) FLOOR SPACE AREA FOOTPRINT AREA (L X W X H): 4085 MM X 1749 MM X 1860 MM (160.83 INCH X 68.86 INCH X 73.23 INCH) EQUIPPED WITH: KAUKAN INDUSTRIES CO., LTD. ENCLOSURE CABINET HEAT EXCHANGER UNIT (MODEL: C&H-3ARU-1T, FAN: 40W X 2, POWER SOURCE: 1-PHASE 220V AC, MFG DATE: 2008-09) PROGRAMMABLE TAILSTOCK WITH MT #4 CENTER ASSEMBLY RIGHT-HAND SIDE HINGED TRACK BELT METAL CHIP CONVEYOR ASSEMBLY UNIT WITH INTEGRATED CATCH BUCKET HIGH-CAPACITY 2 HP COOLANT PUMP SYSTEM AUTO-LUBRICATION PUMP SYSTEM MODULE HARD JAW TOOLING CHUCK CLAMPING JAW ACCESSORIES AS PICTURED INTEGRATED OVERHEAD MACHINE WORKSPACE LIGHTING LAYOUT STANDING MULTI-LEVEL STATUS TOWER INDICATOR LIGHT ASSEMBLY DUAL-POSITION CHUCK OPERATOR FOOT PEDAL SHROUD ASSEMBLY STACKED SET OF FACTORY LITERATURE TEXT FOLDERS INCLUDING ORIGINAL FANUC SERIES 0I-MODEL C / 0I MATE-MODEL C PARAMETER MANUAL, OPERATOR'S MANUAL, AND MAINTENANCE BINDERS S/N C50023

DOOSAN LYNX 220 CNC SLANT BED TURNING CENTER LATHE SPECIFICATIONS: MANUFACTURER: DOOSAN MODEL: LYNX 220 CNC CONTROL: FANUC I SERIES CONTROL PANEL BLOCK SERIAL NUMBER: L2201192 MODEL DESIGNATION NUMBER: NL21H0IBA02 ELECTRICAL REQUIREMENT: 23.68 KVA INPUT PHASE / VOLTAGE: 3-PHASE / 220V AC FULL LOAD CURRENT: 62.15 A SHORT-CIRCUIT RATING (SCCR): 17,000 A RECORDED RUN TIME HOURS: 4144 HOURS MAX SWING OVER BED: 20.1" (510 MM) MAX SWING OVER SADDLE: 11.4" (290 MM) MAX TURNING DIAMETER: 12.6" (320 MM) MAX TURNING LENGTH: 12.7" (322 MM) MAX BAR CAPACITY: 1.81" (45 MM) SPINDLE NOSE: A2-5 SPINDLE BORE DIAMETER: 2.09" (53 MM) SPINDLE SPEED RANGE: 60 - 6,000 RPM SPINDLE MOTOR POWER: 15 HP (11 KW CONTINUOUS / 15 KW MAX) FULL LOAD SPINDLE TORQUE: 70.4 FT-LBS TURRET CAPACITY: 12 STATIONS TURRET INDEX TIME: 0.15 SECONDS (SINGLE STEP) OD TOOL SHANK SIZE: 1.0" X 1.0" (25 MM) MAX BORING BAR DIAMETER: 1.5" (40 MM) X-AXIS TRAVEL: 6.9" (175 MM) Z-AXIS TRAVEL: 13.0" (330 MM) X-AXIS RAPID TRAVERSE: 1,181 IPM (30 M/MIN) Z-AXIS RAPID TRAVERSE: 1,417 IPM (36 M/MIN) FLOOR FOOTPRINT (L X W): 90" X 63" (2286 MM X 1600 MM) MACHINE HEIGHT: 65" (1651 MM) MACHINE WEIGHT: 7,716 LBS (3,500 KG) S/N: L2201192

WELLS-INDEX MODEL 847 VERTICAL MILLING MACHINE WITH SONY 2-AXIS DRO AND SERVO TABLE POWER FEED. TABLE SIZE: 10" X 48" OR 11" X 50". T-SLOTS: 3 SLOTS, 5/8" WIDE. LONGITUDINAL TRAVEL (X-AXIS): 28" TO 34". CROSS TRAVEL (Y-AXIS): 14" TO 17". VERTICAL KNEE TRAVEL (Z-AXIS): 16" TO 16.5". RAM TRAVEL: 16". SPINDLE MOTOR: 2 HP OR 3 HP. SPINDLE SPEED RANGE: 50 TO 4,200 RPM. SPINDLE TAPER: R8 OR #30 NMTB. QUILL TRAVEL: 5.25". QUILL POWER FEEDS: 3 RATES (0.0015", 0.003", 0.006" PER REVOLUTION). HEAD TILT (FORWARD/BACKWARD): 45 DEGREES. HEAD ROTATION (LEFT/RIGHT): 90 DEGREES. TURRET ROTATION: 360 DEGREES ON COLUMN. MACHINE WEIGHT: APPROX. 2,500 LBS TO 3,020 LBS. FOOTPRINT DIMENSIONS: APPROX. 60"W X 66"D X 86"H. HAND-SCRAPED, HARD-CHROMED SQUARE WAYS. 2 PAIRS OF PRECISION ANGULAR CONTACT SPINDLE BEARINGS. EQUIPPED WITH: SONY MILLMAN LH30-2 2-AXIS DIGITAL READOUT (DRO) SERVO TYPE 150 TABLE POWER FEED SYSTEM WORK LIGHT CENTRALIZED LUBRICATION SYSTEM. S/N: 22753

1989 YANG SHENG CP-1550 15" X 50" ENGINE LATHE EQUIPPED WITH PRATT BURNERD 3-JAW CHUCK & TAILSTOCK. SPECIFICATIONS: MODEL: CP-1550 (STANDARD 15" SWING VARIANT) DATE OF MANUFACTURE: JUNE 1989 MANUFACTURER: YANG SHENG MACHINERY CO., LTD. ORIGIN: MADE IN TAIWAN R.O.C. MACHINE TYPE: PRECISION REMOVABLE GAP V-BED ENGINE LATHE (INDUCTION HARDENED & GROUND BEDWAYS) SWING OVER BED: 15.0" (381 MM) DISTANCE BETWEEN CENTERS: 50.0" (1270 MM) SPINDLE NOSE TYPE: D1-6 CAMLOCK SPINDLE THROUGH BORE SIZE: ~2.12" (54 MM) MAIN SPINDLE MOTOR POWER: 7.5 HP POWER SUPPLY REQUIREMENTS: 220/440 V (WIRED 220V ON EXTERNAL TAG), 3-PHASE, 60 HZ NUMBER OF AVAILABLE MECHANICAL SPEEDS: 16 STEPS GEARED HEAD SPINDLE SPEED RANGE: 45 - 2,000 RPM CROSS SLIDE TRAVEL RANGE: 9.0" (228 MM) TOP SLIDE / COMPOUND TRAVEL RANGE: 4.75" (120 MM) INCH THREADING CUT CAPACITY: 4 TO 60 TPI METRIC THREADING CUT CAPACITY: 0.5 TO 7.5 MM PITCH ESTIMATED NET MACHINE WEIGHT: ~3,300 LBS (1,500 KG) PHYSICAL MACHINE DIMENSIONS (L X W X H): 97" X 38" X 62" EQUIPPED WITH: PRATT BURNERD INTERNATIONAL 3-JAW SETRITE LATHE CHUCK MADE IN ENGLAND (SERIES 9219) MANUAL TOOLROOM TAILSTOCK ASSEMBLY UNIT WITH QUICK-ACTING LOCKING LEVER ALORIS-STYLE QUICK-CHANGE TOOL POST BLOCK SYSTEM WITH LOCKING LEVERAGE HANDLE MECHANICAL FOOT BRAKE PEDAL BAR LINKAGE ASSEMBLY THREADING DIAL INDICATOR GAUGE UNIT BRACKET ASSEMBLY MULTI-SELECTOR CONTROL CARRIAGE LEVER FOR SPINDLE FORWARD / NEUTRAL / REVERSE ENGAGEMENT REAR CARRIAGE BACKSPLASH SHEET METAL GUARD PANEL UNIT INTEGRATED COOLANT PUMP RECIRCULATING SUMP RESERVOIR BASE PAN S/N 4974

5-HP 80-GALLON TWO-STAGE AIR COMPRESSOR WITH REFRIGERATED DRYER SYSTEM

NORTHSTAR 7.5-HP 80-GALLON TWO-STAGE AIR COMPRESSOR WITH REFRIGERATED DRYER SYSTEM. DRIVE MOTOR MODEL: CB35 (CATALOG #: D7C1K / 8204-2ZJC1). MOTOR POWER CONFIGURATION: 7.50 HP / SINGLE-PHASE (PH 1). MOTOR VOLTAGE / FREQUENCY: 230 V / 60 HZ. MOTOR AMPERAGE RATING: 30.00 AMPS. MOTOR RPM / FRAME: 3460 RPM / FR 184T. MOTOR DUTY CYCLE / ENCLOSURE: CONTINUOUS (CONT) / ODP OPEN DRIP PROOF. PUMP STYLE: HEAVY-DUTY CAST IRON V-TWIN RECIPROCATING PISTON PUMP. NUMBER OF STAGES: 2-STAGE. RECEIVER TANK CAPACITY: 80-GALLON VERTICAL LAYOUT. EQUIPPED WITH: COORDINATED STANDALONE REFRIGERATED COMPRESSED AIR DRYER UNIT WITH AN INTEGRATED DIGITAL LED TEMPERATURE/STATUS READOUT DISPLAY MATRIX PANEL.

1997 DAEWOO PUMA 200 CNC SLANT BED TURNING CENTER LATHE. FANUC SERIES 18-T CONTROL. SWING OVER BED: 20.08 INCH. SWING OVER CROSS SLIDE: 12.99 INCH. MAXIMUM TURNING DIAMETER: 13.78 INCH. MAXIMUM TURNING LENGTH: 15.75 INCH. SPINDLE NOSE DESIGN: A2-6. SPINDLE BORE DIAMETER: 2.99 INCH. MAXIMUM BAR WORKING CAPACITY: 2.56 INCH. SPINDLE SPEED RANGE: 45 - 4,500 RPM. SPINDLE MOTOR PEAK POWER: 15 / 20 HP (11 / 15 KW). X-AXIS CROSS TRAVEL: 9.53 INCH. Z-AXIS LONGITUDINAL TRAVEL: 17.32 INCH. X-AXIS RAPID TRAVERSE RATE: 787 IPM. Z-AXIS RAPID TRAVERSE RATE: 1,000 IPM. TURRET STATIONS / POSITIONS: 12 STATIONS. TURRET INDEXING SPEED: 0.5 SECONDS. TOOL SHANK SIZE (SQUARE): 1.0 INCH. BORING BAR HOLDER ID: 1.5 INCH. TAILSTOCK CENTER TAPER: MORSE TAPER NO. 4 (MT-4). TAILSTOCK QUILL DIAMETER: 2.95 INCH. TAILSTOCK QUILL TRAVEL DISTANCE: 3.15 INCH. EQUIPPED WITH: FANUC SERIES 18-T INTEGRATED CNC CONTROL CONSOLE UNIT, CRAMER ANALOGUE OPERATIONAL HOUR METER DISPLAY PANEL, HEAVY-DUTY 12-POSITION AUTOMATIC INDEXABLE TURRET DISK CONFIGURATION, INTEGRATED HYDRAULIC 3-JAW POWER CHUCK WORKHOLDING SYSTEM, ADJUSTABLE TAILSTOCK BODY ASSEMBLY CASTING WITH MT-4 MANUAL QUILL TRAVEL ADVANCEMENT HOUSING. S/N: PM200327

HAAS HTS5 MANUAL TAILSTOCK ASSEMBLY WITH ROYAL PRODUCTS #3MT LIVE CENTER. MANUAL HANDWHEEL OPERATION WITH CRANK HANDLE EQUIPPED WITH: ROYAL PRODUCTS QUAD BEARING LIVE CENTER (#3MT, P/N 10413-A) COUNTRY OF MANUFACTURE: MADE IN USA

3-CUBIC FOOT VIBRATORY FINISHING MACHINE

HAAS HTS6 MANUAL TAILSTOCK ASSEMBLY WITH ROYAL PRODUCTS #3MT LIVE CENTER. MANUAL HANDWHEEL OPERATION WITH CRANK HANDLE EQUIPPED WITH: ROYAL PRODUCTS VERSA-TURN LIVE CENTER (#3MT, P/N 10833). COUNTRY OF MANUFACTURE: MADE IN USA. S/N: 8/11

DORIAN TOOL CNC KNURLING TOOLS WITH HOLDERS AND ASSORTED KNURL WHEELS. MADE IN USA. KNURLING TOOL HEADS & HOLDERS: DORIAN TOOL CNC-75-1-2 CNC KNURLING TOOL #1 (DIAMOND CUTTING STYLE, PART NO. 73310120410) WITH MOLDED PROTECTIVE CASE. DORIAN TOOL CNC-75-2-R CNC KNURLING TOOL #2 (DIAMOND CUTTING STYLE, PART NO. 73310120510) WITH MOLDED PROTECTIVE CASES. DORIAN TOOL CNCKM12 / CNC-75 DIAMOND PATTERN KNURLING TOOL HOLDER (SW2S-SERIES, KNURL PIN: RSW-2.05, SERIAL/PART: D11354 1000). DORIAN TOOL S-SCK-100 KNURLING TOOL HOLDER (KNURLS SW4, SERIES SSCK-125-4-2, KNURL PIN SW4.0P-2S) WITH PRE-MOUNTED SW4S-25 BRASS-COLORED KNURL WHEELS.

AIR TURBINE TOOLS 625CT40 40,000 RPM AIR SPINDLE ON CAT 40 TOOL HOLDER WITH CASE. MANUFACTURER: AIR TURBINE TOOLS MODEL NUMBER: 625CT40 SERIAL NUMBER: 400060 SERIES: 625 SERIES SPINDLE SHANK / TAPER TYPE: CAT 40 OPERATING SPEED: 40,000 RPM (GOVERNED) POWER OUTPUT: 0.45 HP (0.34 KW) COLLET TYPE: ER11 UP (ULTRA-PRECISION) MAX SHANK CAPACITY: 1/4" / 6 MM VIBRATION: < 0.4 MM/S2 SOUND LEVEL: < 78 DBA AIR SUPPLY REQUIREMENTS: OPERATING PRESSURE: 90 PSI (6.2 BAR) CLEAN, DRY COMPRESSED AIR FLOW RATE (IDLE): 14 CFM (6.61 L/S) FLOW RATE (UNDER LOAD): 11 - 20 CFM (5.19 - 9.44 L/S) MIN. HOSE INNER DIAMETER: 6 MM CRITICAL MAINTENANCE RULES: FILTRATION: 5-MICRON HIGH-FLOW FILTER/EXTRACTOR REQUIRED (CONTAMINATED AIR DAMAGES TOOL) LUBRICATION: DO NOT USE LINE OILER (OIL-FREE TURBINE / GREASE-PACKED CERAMIC BEARINGS) EQUIPPED WITH: CNC CAT 40 TAPER TOOL HOLDER SHANK WITH ATTACHED RETENTION PULL STUD

WELLS-INDEX MODEL 847 VERTICAL MILLING MACHINE. SPINDLE MOTOR: 3.0 HP CONTINUOUS DUTY (STANDARD 3-PHASE). SPINDLE SPEED: STEP-LESS VARIABLE SPEED (50 TO 4,200 RPM). SPEED CONTROL: DIRECT MECHANICAL LEVER ADJUSTMENT. SPINDLE BEARINGS: FOUR (4) PRECISION ANGULAR CONTACT BEARINGS. QUILL DIAMETER: 3-3/8 INCHES. POWER QUILL FEED: ENGAGED AT ALL SPEEDS (RATED UP TO 5/8" DRILL). QUILL TRAVEL: 5 INCHES MAXIMUM STROKE DEPTH. STANDARD TABLE SIZE: 9" X 46". TABLE T-SLOTS: THREE 5/8" SLOTS. LONGITUDINAL TRAVEL (X-AXIS): 32 INCHES. CROSS TRAVEL (Y-AXIS): 12 INCHES. VERTICAL KNEE TRAVEL (Z-AXIS): 16 INCHES. RAM TRAVEL: 12 INCHES (HORIZONTAL ADJUSTMENT). MAX TABLE CAPACITY: 1,500 LBS (CENTERED LOAD). HEAD TILT (FORWARD / BACKWARD): 45 TO -45. HEAD ROTATION (LEFT / RIGHT): 90 TO -90. TURRET ROTATION ON COLUMN: FULL 360. MACHINE NET WEIGHT: APPROX 2,500 TO 3,020 LBS. FLOOR SPACE REQUIRED: APPROX 70" (W) X 66" (D) X 86" (H). CONSTRUCTION: HEAVY CROSS-RIBBED AMERICAN CAST IRON. EQUIPPED WITH: TABLE POWER FEED SYSTEM, WORK LIGHT, AUTOMATIC/MANUAL LUBRICATION SYSTEM. S/N: 16966

DOUBLE-DOOR STEEL SUPPLY CABINET WITH HUOT DRILL ORGANIZERS AND ASSORTED BITS

KAISER CAT50 PRECISION ADJUSTABLE BORING BAR TOOL HOLDER WITH EWN68EXKAB6 HEAD

HUOT TOOLSCOOT ROLLING CNC TOOL CART CAT 40

HUOT TOOLSCOOT ROLLING CNC TOOL CART CAT 40

HUOT TOOLSCOOT ROLLING CNC TOOL CART CAT 40

HUOT TOOLSCOOT ROLLING CNC TOOL CART CAT 40

ASSORTED INDEXABLE LATHE BORING BARS INCLUDING ULTRA-DEX AND DORIAN TOOL. SPECIFICATIONS: MAJOR BRANDS: ULTRA-DEX USA, DORIAN TOOL. TOOLING TYPES: INDEXABLE BORING BARS AND ANTI-VIBRATION CHATTER-FREE BARS. KEY MODEL MARKINGS: S24U-MCLNR-4, CFT B1500-19. EQUIPPED WITH: DORIAN TOOL S24U-MCLNR-4 INDEXABLE BORING BAR (MINIMUM BORE: 1.780", SEAT: ICSN-433, LOCK PIN: NL-46). ULTRA-DEX USA CFT B1500-19 08/10 "CHATTER FREE TOOL" INTERNAL ANTI-VIBRATION BORING BAR.

SKAT-BLAST DRY ABRASIVE BLAST CABINET

2012 BISON 3205-8 8-INCH 3-JAW INDEXING FIXTURE CHUCK. 8-INCH DIAMETER, 3 JAWS, 3000 MAX RPM. EQUIPPED WITH HEAVY DUTY DUAL-FLANGE INDEXING BASE. S/N: 106840

BISON 3275-8 8" 3-JAW INDEXING FIXTURE CHUCK SPECIFICATIONS: BRAND: BISON MODEL: 3275-8 (MOUNTED ON A 9450-8 BASE) SIZE: 8" DIAMETER NUMBER OF JAWS: 3 COUNTRY OF MANUFACTURE: MADE IN POLAND MAX RPM: 3000 EQUIPPED WITH: HEAVY DUTY DUAL-FLANGE INDEXING BASE

TRINCO MASTER MODEL 48X36/BP DRY BLAST CABINET WITH TRINCO BP DUST COLLECTOR. INTERNAL WORK AREA: 48" W X 36" D X 36" H. EXTERNAL FLOOR FOOTPRINT: 53" W X 37" D X 78" H. DOOR STANDARD ACCESS: TWO FULL-SIZE SIDE DOORS (28" W X 30" H OPENINGS). VIEWING WINDOW: 12" X 24" SAFETY GLASS WITH QUICK-CHANGE FRAME. STRUCTURE SHELL MATERIAL: 14-GAUGE HEAVY WELDED STEEL. FLOOR GRATING: 1/8" EXPANDEX SAFETY EXPANSION STEEL WITH CARBON DEBRIS SCREEN. DUST COLLECTOR MODEL: BP DUST COLLECTOR. DUST COLLECTOR SERIAL NUMBER: 53841-B. DUST COLLECTOR ELECTRICAL REQUIREMENTS: 115 V, 1 PH, 60 HZ.

2007 HAAS SERVO BAR 300 CNC AUTOMATIC BAR FEEDER SYSTEM. MODEL: BAR 300. DATE OF MANUFACTURE: AUGUST 2007. ORIGIN: MADE IN OXNARD, CA, U.S.A. FEED SYSTEM: PRECISION SERVO-DRIVEN BALLSCREW. MATERIAL DIAMETER CAPACITY: 3/8" TO 3-1/8" (10 MM TO 79 MM). BAR STOCK MAXIMUM FEED LENGTH CAPACITY: 60" (1524 MM). MINIMUM FEED LENGTH CAPACITY: 10" (254 MM). FEED MECHANISM ACCURACY: 0.005" (0.13 MM). MAXIMUM RAPID FEED SPEED: 50 FT/MIN (15.24 M/MIN). STORAGE LOADING TRAY CAPACITY: SPACE FOR UP TO 30 BARS (CALCULATED USING STANDARD 1" DIAMETER STOCK). PROGRAMMING ARCHITECTURE SUPPORT: DRIVEN DIRECTLY BY G105 G-CODES THROUGH THE HOST LATHE CONTROL INTERFACE. BUILT-IN SETUP ROUTINES: FEATURES MACRO VARIABLES Q1 THROUGH Q12 FOR BAR LENGTH, REFERENCE POSITIONING, EOB SETTINGS, PUSH ROD TRAVEL, LOAD/UNLOAD BAR, AND BUMP LOAD OPERATIONS. HOST LATHE SERIES COMPATIBILITY: ENGINEERED SPECIFICALLY FOR HAAS SL AND TL SERIES CNC LATHES (POST-2000 VERSIONS) WITH THE BAR FEED INTERFACE (BBIH) OPTION. PART NUMBER REFERENCES: P/N 29-7900G REV. C. NET SYSTEM WEIGHT: 900 LBS (408 KG). FLOOR FOOTPRINT FOOTPRINT (L X W X H): 99.00" X 55.00" X 54.00" (APPROX. 4.5' X 8'). EQUIPPED WITH: ASSORTED GROUP OF MULTI-SIZE EXTRUDED PLASTIC SPINDLE LINERS AND PUSHROD GUIDES AS PICTURED (INCLUDING LINER SIZES 1.253.125 AND MATCHING ADAPTERS). HEAVY DUTY STEEL LINER STORAGE MOUNTING BRACKET FRAME ASSEMBLY. INTEGRATED TOP VIEWPORT ACCESS COVER PANELS WITH THREE VIEWING LENSES. ORIGINAL FACTORY HAAS OPERATOR'S ADDENDUM MANUAL FOLDER (DOCUMENT NO: 96-0013 REV AB 07/07). MULTI-TIER ADJUSTABLE HEIGHT MACHINE GROUNDING STABILIZATION FEET HARDWARE PACK. S/N 92422

ASSORTED CRITERION AND MESA TOOL CAT40 INDEXABLE BORING BARS AND TOOL HOLDERS

(5 PIECES) SCHERR-TUMICO 0"-5" BLADE MICROMETER SET WITH WOODEN CASES. MEASURING RANGE: 0" - 5" TOTAL - (1) 0" - 1" BLADE MICROMETER, (1) 1" - 2" BLADE MICROMETER, (1) 2" - 3" BLADE MICROMETER, (1) 3" - 4" BLADE MICROMETER, (1) 4" - 5" BLADE MICROMETER. MADE IN USA.

60" / 150CM PRECISION STAINLESS VERNIER CALIPER WITH WOODEN CASE. BRAND: KANON. TYPE: PRECISION VERNIER CALIPER. MATERIAL: STAINLESS STEEL. MAXIMUM CAPACITY: 60" / 150CM. GRADUATION/RESOLUTION: 1/50MM, 1/1000IN. COUNTRY OF MANUFACTURE: MADE IN JAPAN

ASSORTED CAT40 TAPER TOOL HOLDERS

ASSORTED ISCAR CAT40 INDEXABLE FACE MILLS AND SHELL MILL HOLDERS

ASSORTED THREAD PLUG GAUGES, METRIC PINS. THREAD PLUG SIZES: 1/2"-20 UNF 2B, 7/8"-14 UNF 2B, 1-3/8"-12 UNF 2B, 1-5/16"-12 UN 2B, 1-1/16"-12 UN 2B, 13/16"-16 UN 2B, 3/8"-18 NPT L-1, 1/4"-18 NPT L-1, AND VARIOUS SMALL-DIAMETER COLORED HANDLE GAUGES