MAAP Technologies Complete Facility

1999 SPEEDLINE CAMALOT 3800 VOLTS: 120 AMPS: 15 HZ: 50/60 DIMENSIONS: 55" X 42" X 77" MAX DISPENSE AREA: 14" X 14" DUAL DISPENSE PUMP PASS-THRU CONVEYOR SYSTEM VISION SYSTEM FOR PROGRAMMING FIDUCIAL CORRECTION S/N: 38001100104

GLEN GLEN1000-P PLASMA CLEANER GASES USED: O2, AR, CF4 S/N: 10205 VOLTS: 230 HZ: 50 PHASE: 1 AMPS: 25 WATTS: 5750 GENERAL INFO: THE GLEN 1000P PLASMA CLEANER IS A 1000 WATT PARALLEL PLATE PLASMA CLEANING SYSTEM DESIGNED TO GIVE UNIFORM PLASMA OVER UP TO FOUR LARGE (16 X 16-INCH) SAMPLE TRAYS. IT HAS THREE PLASMA GAS INPUTS AND AN INERT GAS INPUT TO ENABLE THE CHAMBER CONTENTS TO BE BOUGHT BACK TO ATMOSPHERIC PRESSURE IN A CONTROLLED ENVIRONMENT. THE SYSTEM HAS 10 RECIPES SELECTABLE USING PUSHBUTTONS ON THE FRONT OF THE TOOL CAPABILITIES PHOTORESIST DESCUM/ASHING CLEANING PRIOR TO ELECTROPLATING ORGANICS REMOVAL SURFACE ACTIVATION OF PDMS PRIOR TO BONDING ETCHING (MILD)

K&S 961 WATER MOUNTING STATION. THE K&S MODEL 961 WAFER MOUNTING STATION ENABLES THE MOUNTING OF WAFERS UP TO 8 INCHES IN DIAMETER. THIS MOUNTING STATION IS COMPATIBLE WITH STANDARD OR INTERLEAVED UV-CURABLE TAPE AND CONTAINS A VACUUM STAGE WAFER HOLD-DOWN FOR HOLDING THE WAFER IN POSITION DURING MOUNTING. A PROGRAMMABLE HEATING STAGE HEATS THE TAPE TO ATTAIN UNIFORM TENSIONING, THE ADJUSTABLE SPRING-LOADED PLATE ENSURES OPTIMAL CONTACT PRESSURE, AND A BUILT-IN TAPE CUTTER FACILITATES MOUNTED PIECE EXTRACTION. SPECIFICATIONS: BUBBLE-FREE TAPE APPLICATION, UNIFORM TAPE TENSION, ADJUSTABLE CONTACT PRESSURE, CLOSED-LOOP PLATE TEMPERATURE CONTROL. VOLTS:110 HZ: 50/60 AMPS: 5 S/N: 630089

1997 WEST BOND 7200A WIRE WELDER WITH CONTROLLER. VOLTS: 115 AMPS: 1 CYCLES: 50/60 S/N: 10034 TECHNIQUIP CONTOLLER MODEL: FOI-150 SN: F31028 MFG DATE: 1997 GENERAL INFO: 7200 SERIES PROVIDES SEPARATE FUNCTIONS ON THE SAME TOOL HEAD TO DISPENSE EPOXY, THEN TO PICK UP CHIPS, ROTATE THEM INTO ALIGNMENT, AND PLACE THEM. ALL OPERATION IS CONTROLLED BY WESTBONDS UNIQUE THREE-AXIS MICROMANIPULATOR, WORKING IN COMBINATION WITH OPTICAL ENCODERS UNDER MICROPROCESSOR CONTROL. THE WORKPIECE IS HELD ON A FREE ANVIL WORK HOLDER, WHERE CHIPS ARE ALSO ARRAYED FOR PICK UP. THE DUAL TOOL ASSEMBLY IS DRIVEN DIRECTLY BY THE MOTOR BETWEEN THE TWO POSITIONS FOR EPOXY DISPENSE AND FOR VACUUM PICKUP, WITH THE TRANSFER SIGNALED BY LIFT TO A PROGRAMMED ELEVATION. ANOTHER PROGRAMMED ELEVATION IS SET TO DISPENSE EPOXY WITHOUT CONTACT. THIS METHOD IS FURTHER ENABLED BY THE DESIGN OF THE C SERIES MANIPULATOR IN WHICH EACH AXIS IS INDEPENDENTLY GUIDED AND THEREFORE CAN BE LOCKED ON COMMAND BY THE PNEUMATIC BRAKE. CONTROL OF VACUUM FOR PICK UP AND PLACEMENT IS BY WORK SENSING FIRING SWITCH, WITH DOWNFORCE ADJUSTABLE FROM ZERO TO APPROXIMATELY 75 GRAMS. WHILE THE CHIP IS HELD BY VACUUM, IT CAN BE ROTATED CONTINUOUSLY BY A MOTOR BY AN OPERATORS OPTICAL ENCODER CONTROL.

STARRCO SEMICONDUCTOR CLEANROOM GENERAL INFO: IN SEMICONDUCTOR AND MICROELECTRONIC MANUFACTURING APPLICATIONS, CONTAMINATION IS A HUGE SOURCE OF PRODUCT FAILURE. ENVIRONMENTAL CONTROL IS CRITICAL TO THE SUCCESS OF SEMICONDUCTOR WAFER FABRICATION. MODULAR CLEANROOMS ENSURE YOU ARE ABLE TO DELIVER HIGH PRODUCT YIELDS, WITHOUT PRODUCTION ISSUES OR PRODUCT FAILURES. SEMICONDUCTOR CLEANROOMS MUST MAXIMIZE SPACE AND HOUSE SPECIALIZED EQUIPMENT, WHICH MAKES THEM A PERFECT FIT FOR A MODULAR SOLUTION. A MODULAR CLEANROOM IS DESIGNED TO SUIT YOUR SPECIFIC SPACE AND EQUIPMENT REQUIREMENTS AND CAN BE DELIVERED AND INSTALLED IN A SHORT PERIOD OF TIME, ENSURING YOU NEVER LOSE OUT ON PRODUCTION OR PRODUCTIVITY. FEATURES: STRUCTURAL PERFORMANCE STARRCO MODULAR OFFICES FOR SALE ARE DESIGNED TO COMPLY WITH STRUCTURAL REQUIREMENTS OF THE INTERNATIONAL BUILDING CODE, WITH REGARD TO LOAD-BEARING DESIGN, ROOF DEFLECTION AND LATERAL LOAD RESISTANCE. A STARRCO PREFABRICATED OFFICE CAN ALSO BE DESIGNED TO MEET EARTHQUAKE ZONE REQUIREMENTS. FIRE PROTECTION STARRCOS DL WALL SYSTEMS HAVE GYPSUM BOARD PANELS AND COMMERCIAL GRADE 20GA. STEEL DOORS WITH 18GA. STEEL FRAMES. ALL COMPONENTS OF THESE WALL SYSTEMS ARE NON-COMBUSTIBLE. THE SANDWICH PANELS HAVE BEEN TESTED BY GUARDIAN FIRE TESTING LABORATORIES IN ACCORDANCE TO ASTM-E-2768. THESE MODULAR WALL PANELS WERE FOUND TO BE CLASS A FIRE RESISTANT WITH A FLAME SPREAD OF LESS THAN 5 AND A SMOKE DENSITY OF LESS THAN 10. COPIES OF THE TEST RESULTS ARE AVAILABLE UPON REQUEST. ELECTRICAL AII ELECTRICAL COMPONENTS ARE UL LISTED. THE ELECTRICAL HANDY BOX MEETS NEC (NATIONAL ELECTRIC CODE) REQUIREMENTS ACCESSIBILITY ADA (AMERICANS WITH DISABILITIES ACT) COMPLIANT LOCKSETS AND DOOR CLOSERS ARE AVAILABLE UPON REQUEST. STARRCOS STANDARD DOORS MEET THE WIDTH REQUIREMENTS FOR THE ADA.

MIYACHI UNITEK THIN-LINE SERIES 80 WELD AND REFLOW SOLDER HEADS WITH PHASEMASTER IVC CONTROLLER DIMENSIONS: 41" X 28" X 37" GENERAL INFO: MIYACHI UNITEK'S THIN-LINE SERIES 80 ARE PRECISION, LOW INERTIA, FORCE FIRED WELD HEADS WITH A NARROW VERTICAL PROFILE. THEIR 4.5 CM (134 INCH) WIDTH, 2.5CM (1 INCH) STROKE, 89-178 N (20-40 POUND) MAXIMUM FORCE RANGE, AND THROAT DEPTH ALLOW THEIR USE IN A WIDE VARIETY OF PRECISION RESISTANCE WELDING APPLICATIONS. BOTH IN-LINE AND OFFSET ELECTRODE HOLDERS ARE AVAILABLE. THE DIMENSIONS OF THE MOUNTING POST AND THE MAIN SHAFT HAVE BEEN SELECTED TO ENSURE THAT THE ELECTRODES DO NOT "WIPE" MORE THAN 0.076 MM (0.003 INCH) ON THE 89 N (20 POUND) HEADS AND 0.102MM (0.004 INCH) ON THE 178 N (40 POUND) HEADS. THIS IS AN IMPORTANT CONSIDERATION IN CRITICAL WELDING APPLICATIONS SUCH AS HERMETIC SEALS AND PRESSURE TRANSDUCERS.

FANCORT INDUSTRIES INC. PNEUMATIC PRESS GENERAL INFO: FANCORT'S PNEUMATIC AIR PRESSES ARE QUIET, HEAVY-DUTY, AND DELIVER SMOOTH OPERATION. DESIGNED FOR APPLICATIONS REQUIRING 1 TON OR MORE, THESE VERY STURDY PNEUMATIC AIR PRESSES COME IN SEVERAL MODELS OF DIFFERENT FORCE RANGES. PRESS-FIT MACHINERY FANCORT DESIGNS AND BUILDS FIXTURES AND BENCH-TOP PNEUMATIC PRESSES FOR PRESSING COMPLIANT PIN CONNECTORS INTO CIRCUIT BOARDS. FANCORT'S PNEUMATIC AIR PRESSES ARE QUIET, HEAVY-DUTY, AND DELIVER SMOOTH OPERATION. DESIGNED FOR APPLICATIONS REQUIRING 1 TON OR MORE, THESE VERY STURDY PNEUMATIC AIR PRESSES COME IN SEVERAL MODELS OF DIFFERENT FORCE RANGES PRESS-FIT TECHNOLOGY IS THE INSERTION OF FLEXIBLE OR RIGID CONNECTOR PINS INTO PLATED THROUGH HOLES (PTHS) OF PRINTED CIRCUIT BOARDS WITHOUT SOLDERING. FANCORT OFFERS A COMPLETE RANGE OF MACHINES AND TOOLING FOR LOW TO AUTOMATED HIGH VOLUME MACHINES. OUR EQUIPMENT HAS BEEN USED BY THE WORLDS LARGEST ELECTRONICS MANUFACTURERS. ADVANTAGES OF PRESS-FIT TECHNOLOGY VS SOLDERING PREVENTION OF THERMAL STRESS ON THE PCB AND NO SOLDERING ELIMINATING PINS DAMAGE OR BREAKAGE, SOLDER BUMP OR FLUX RESIDUE, ETC. AVOIDANCE OF SHORT, COLD SOLDER CONNECTION, CORROSION, ETC. ENABLE PLUGINS TO CONNECT WITH PLUGS DIRECTLY, AND NO NEED FOR SCREWS CONNECTORS WITH LONG PINS CAN BE CONNECTED FROM THE BACKSIDE OF THE PCB, FOR NO SOLDERING REPARABILITY THAT THE CONNECTOR OR A SINGLE PIN CAN BE REPLACED EASILY STABLE AND LOW CONTACT RESISTANCE, GOOD HIGH FREQUENCY CHARACTERISTICS NO NEED TO WASH PCBS AND PREVENTION OF POLLUTED SUBSTANCES LIKE FLUXES FOR NO SOLDERING HIGH EFFICIENCY AND LOW COST GREEN TECHNOLOGY , NO SOLDER OR FLUS TO STORE OR RECYCLE

1991 K&S 1484 WEDGE WIRE BONDER GENERAL INFO: K&S IS THE LEADER IN WIRE AND RIBBON BONDING FOR POWER SEMICONDUCTORS, AUTOMOTIVE POWER MODULES, AND INDUSTRIAL POWER HYBRIDS. K&S WEDGE BONDERS ULTRASONICALLY BOND ROUND ALUMINUM WIRES FROM 25 TO 500 MICRONS IN DIAMETER (1-20 MILS) AND USE THE POWERRIBBON PROCESS TO ULTRASONICALLY BOND ALUMINUM RIBBONS FROM 500 X 100 TO 2000 X 300 MICRONS IN CROSS-SECTION (20 X 4 - 80 X 12 MILS). S/N: 2711

AMERIVACS AVS20 BAR SEALER S/N: I-10381 VOLTS: 120 AMPS: 6 HZ: 50/60 AIR REQUIREMENTS: 6 CFM @ 110 PSI SUGGESTED MINIMUM AIR COMPRESSOR SIZE: 15+ GALLON GENERAL INFO: OFFERED IN OUR MOST POPULAR 20 SEAL LENGTH, THE AVS COMBINES THE SAME QUALITY AND DESIGN INTEGRITY EXHIBITED IN THE AVN WITHOUT THE GAS-FLUSH FEATURE. THE AVS IS THE CHOICE SEALER FOR THE WIDEST RANGE OF CLIENTELE, FROM MEDICAL AND ELECTRONICS DEVICE MANUFACTURERS TO FOOD INDUSTRY RETAILERS, TO PHARMACEUTICAL AND AEROSPACE CORPORATIONS.

APS GOLD-FLOW GF-12 BENCH TOP REFLOW OVEN MAX BOARD WIDTH: 12 (305MM) MAX BOARD HEIGHT: 1.375 (35MM) HEATING ZONES: 3 TOP, 3 BOTTOM MAX TEMPERATURE: 350C (662F) HEAT TUNNEL LENGTH: 26 (660MM) CYCLONICSTM (FORCED AIR): SIX (6) CONVEYOR EXTENSIONS: OPTION COOLING STATION(S) : ONE (1) VENTING: 4 FLANGE, 100 CFM MAX. COOLING ZONE VENTING: N/A NITROGEN OPTION: YES PC INTERFACE: OPTIONAL OVERALL DIMENSIONS (L X W X H): 39 X 32 X 19H (990MM X 813MM X 483MM) FEATURES: 100 MENU PROFILE STORAGE LEAD-FREE SOLDER REFLOW CAPABLE THE SYSTEM WILL HANDLE BOARD SIZES UP TO 12" (305MM) WIDTH REAL-TIME GRAPHIC TEMPERATURE PROFILER TO ASSIST IN PROFILING OF BOARD 26" (660MM) LONG HEATING TUNNEL NITROGEN GAS INERTING OPTION AVAILABLE COMPATIBLE WITH LEAD AND LEAD-FREE REFLOW APPLICATIONS S/N: APS-GF-12A960721

KULICKE & SOFFA 4127 HEAVY WIRE BONDER VOLTS: 120 WATTS: 60 VA POWER: 150 DIMENSIONS: 26" X 26" X 24" S/N: 204

WEST BOND 74008-28-44A-45J-46-66 SOLDERING STATION S/N: 10172 VOLTS: 115 AMPS: 1 CYCLES: 50-60 CONTROLLER MODEL: 10G SN: 81320

MET ONE 237A LASER PARTICLE COUNTER VOLTS: 9 AMPS: 1 S/N: 05030005

VWR SCIENTIFIC PRODUCTS 1350 FM AUTO CLAVE UV SANATIZER AMPS: 14 VOLTS: 120 HZ: 60 S/N: 0702200

MEIJI EMZ MICROSCOPE THE EM SERIES MICROSCOPES ARE THE MOST RUGGED MICROSCOPES FROM JAPAN AND ARE TAILORED TO FIT THE NEEDS OF EACH AND EVERY CUSTOMER. MODULAR DESIGN ENABLES THE USER TO ENGINEER THEIR OWN CUSTOM SOLUTION FOR VIRTUALLY ANY APPLICATION, SELECTING COMPONENTS FROM THE WIDEST RANGE OF BODIES, STANDS, EYEPIECES, SUPPLEMENTARY LENSES, ILLUMINATORS, CAMERA ADAPTERS, AND ACCESSORY COMPONENTS AVAILABLE IN THE MICROSCOPE INDUSTRY TODAY. FEATURES: SUPERB OPTICS: MULTI-COATED OPTICAL COMPONENTS, FREE FORM CHROMATIC AND SPHERICAL ABERRATION, PROVIDE CRYSTAL-CLEAR, HIGH RESOLUTION IMAGES. THE GREENOUGH OPTICAL DESIGN PROVIDES SUPERIOR ERECT, UNREVERSED, STEREOSCOPIC IMAGES, RICH IN CONTRAST, BRIGHTNESS AND CORRECT IN THEIR ORIGINAL COLOR. EXCELLENT DEPTH OF FIELD AND A FLAT IMAGE RENDITION ARE ALSO CHARACTERISTIC OF THE EM SERIES PRODUCT LINE. RUGGED DEPENDABILITY: ALL-METAL ALUMINUM ALLOY MICROSCOPE BODIES AND COMPONENTS WITH CHEMICAL RESISTANT FINISHES GUARANTEE STABILITY AND RUGGED DEPENDABILITY FOR A LIFETIME OF DAY-IN AND DAY-OUT USE. SUPERIOR CRAFTSMANSHIP, QUALITY COMPONENTS AND MATERIALS RESULT IN LONG-LASTING, HIGH-PERFORMANCE PRODUCTS. ERGONOMIC DESIGN: ALL EM SERIES MICROSCOPES BODIES FEATURE A COMPACT LIGHTWEIGHT DESIGN. EVERY STEREO BODY FEATURES ADJUSTMENT DIOPTER TUBES AND INTERPUPILLARY DISTANCE ADJUSTMENT. OBSERVATION TUBES ARE INCLINED AT 45, 60 OR 90 FOR CONVENIENT FATIGUE FREE VIEWING DEPENDING ON THE APPLICATION, A RANGE OF FIXED OF TILTING FOCUS BLOCKS ARE AVAILABLE TO MOUNT THE MICROSCOPE BODY ONTO EXISTING O.E.M. EQUIPMENT. A CHOICE OF ZOOM, TURRET OR FIXED MAGNIFICATION BODIES WITH VARIOUS WORKING DISTANCES, OPTIONAL AUXILIARY OBJECTIVES AND EYEPIECES, MULTIPLE ADJUSTABLE STANDS, VERSATILE ILLUMINATION SYSTEMS, AND AUXILIARY COMPONENTS ALLOW THE END USER TO DESIGN A SYSTEM TO FULFILL THEIR SPECIFIC REQUIREMENTS. S/N: 73565

WESTBOND 7440E MANUAL WIRE BONDER VOLTS:115 HZ: 50/60 GENERAL INFO: THE MACHINES OF WESTBONDS MODEL 7440E SERIES ARE DEDICATED ULTRASONIC WIRE BONDERS FOR INTERCONNECTING INSULATED, GOLD PLATED, COPPER WIRE TO THIN FILM SLIDERS OR FLEX-CIRCUITS OF COMPUTER DISK DRIVES, OR FOR OTHER SIMILAR INSULATED WIRE CONNECTION APPLICATIONS. THESE MACHINES BOND INSULATED WIRES OF 0.0007 TO 0.002 INCH DIAMETER DIRECTLY TO THIN FILM GOLD WITHOUT THE NEED TO FIRST STRIP OFF THE INSULATION. THIS IS ACCOMPLISHED BY A SPECIALLY DESIGNED WEDGE TOOL APPLIED WITH PROGRAMMED ULTRASONIC ENERGY, FORCE, AND TIME, TO SOFTEN AND DISPERSE INSULATION, THEN TO BOND THE EXPOSED WIRE TO THE WORK PIECE METALLIZATION. WESTBONDS UNIQUE SINGLE LEVER X-Y-Z MICROMANIPULATOR MAKES IT POSSIBLE TO USE THIS PROCESS FOR BONDING DISK SLIDERS BY ENABLING THE OPERATOR TO ENGAGE A FREE STANDING END OF A TWISTED WIRE PAIR IN MID AIR AND DIRECT THAT END TO TOUCH DOWN ON THE WORK PIECE AT THE BOND TARGET, ALL UNDER MICROSCOPE OBSERVATION. TOUCHDOWN IS SENSED BY THE MACHINE TO INITIATE THE BOND PROGRAM. CONTROLS ON THE MACHINE PANEL INCLUDE: DIGITAL POTENTIOMETERS TO ADJUST ULTRASONIC POWER AND TIME. A TEST SWITCH AND INDICATOR LIGHT TO VERIFY THAT THE TRANSDUCER IS OPERATING IN RESONANCE. AN LCD DISPLAY TO SHOW THE COUNT OF BONDS DONE BY THIS TOOL FOR THE PURPOSE OF CHANGING TOOLS WITHIN THE WEAR LIMIT. SELECTOR SWITCH TO ENABLE OR SILENCE THE BEEPER. WHEN ENABLED, THE BEEPER IS ON FOR THE DURATION OF THE ULTRASONIC PULSE. ON-OFF POWER SWITCH.

UNITEK MICROPULL III INDUSTRIAL WIRE BOND PULL TESTER 6-095-06 VOLTS: 115 HZ: 50/60 AMPS: 3/16 GENERAL INFO: *DESIGNED TO PERFORM WIRE BOND PULL TEST IN THE 0.9 TO 99.9 GF RANGE PERFORMS EITHER DESTRUCTIVE OR NON-DESTRUCTIVE A DIGITAL READOUT DISPLAYS DATA IN INCREMENTS OF TENTHS OF A GRAM-FORCE THE WORST CASE ABSOLUTE ACCURACY OF THE MP3 SYSTEM IS A 2% OF READING OR A 0.2 GF, WHICHEVER IS GREATER. S/N: 28006

CABINET FULL OF ASSORTED QUAD SMART FEEDERS & ASSORTED VACUUM PUMP PARTS. THERE ARE 60 FEEDERS IN THIS CABINET. SOME 12MM AND SOME 16MM SMART FEEDERS MOST ARE BRAND NEW. DIMENSION: 36" X 18" 72"

SANDUSKY CABINET ASSORTED CARTRIDGES FOR QUAD MACHINE DIMENSION: 36" X 18" X 72"

USED CABINET FULL OF CLEAN ROOM PPE RANGING FROM COVERALLS, FACE MASKS, AND SHOE COVERS.

HEAVY DUTY CABINET WITH ASSORTED ITEMS ASSORTED STORAGE AND COMPUTER COMPONENTS DIMENSIONS: 36" X 20" X 72"

1997 K+S 1474 BALL BONDER ALUMINUM MODEL: 1474 S/N: 2391 WEIGHT: 1000 LBS MANUFACTURED DATE: 6/2/97 GENERAL INFO: KULICKE & SOFFA'S BALL BONDERS ARE THE LEADING GENERATION OF SEMICONDUCTOR ASSEMBLY EQUIPMENT FOR TODAY'S MOST CHALLENGING APPLICATIONS. WITH OUR LONG-STANDING TRADITION OF INNOVATION AND TECHNOLOGY LEADERSHIP, THE K&S BALL BONDERS SET NEW STANDARDS FOR PERFORMANCE, PRODUCTIVITY, RELIABILITY, AND EASE OF USE.

WELCH 1374 DUOSEAL EXTRACTION PUMP PRODUCT DETAILS HIGH CONTAMINATION TOLERANCE ULTIMATE VACUUM <0.001 TORR LOW RPM FOR LONG SERVICE LIFE SUGGESTED APPLICATIONS VACUUM DISTILLATION VACUUM OVEN VACUUM MANIFOLDS GLOVE BOXES DUOSEAL VACUUM PUMPS ARE KNOWN FOR THEIR RUGGEDNESS WORLD-WIDE. THESE PUMPS HAVE LARGE OIL RESERVOIRS TO DILUTE CONTAMINANTS. LOW PUMP RPM REDUCES FRICTION AND WEAR WHILE MINIMIZING RESERVOIR TEMPERATURE TO LESSEN CHEMICAL REACTIVITY. PUMP CAN BE ORDERED WITH AN OPTIONAL EXHAUST FILTER TO CONTROL OIL MIST.

CENTRAL HYDRAULICS 5500 LB PALLET JACK (ORANGE) CAPACITY: 2 3/4 TON LOWERED HEIGHT: 3" LIFT: 5" FORK: 10" W X 45" L WEIGHT: 285LBS

2 SETS OF GAUGE PINS - 2 USED SETS OF GAUGE PINS PLUGS RANGING FROM .0061 - .0500

OHAUS SCALE WEIGHTS WEIGHTS: 1G, 2G, 5G, 10G, 20G, 200G, 200G, 500G, 1KG

USED BLUE TABLE WITH BLACK TABLE TOP SINGLE DECK DIMENSIONS: 6' X 2.5' X 30" HEIGHT

USED BLUE TABLE WITH WHITE TABLE TOP SINGLE DECK

VBC MICROTORR 11D INTEGRATED DIFFUSION PUMP SYSTEM WITH ALCATEL 2004 VACUUM PUMP FEATURES: VBC MICROTORR 11 ULTIMATE VACUUM 9X10-6 TORR DIFFUSION PUMP SPEED 11 LITERS/SEC. AIRBORNE NOISE EMISSION LEVEL LESS THAN 70 DBA APPLICATIONS : GAS ANALYZERS LEAK DETECTION MASS SPECTROMETERS OTHER SPECTROMETERS ELECTRON MICROSCOPES SURFACE ANALYZERS CENTRIFUGES STERILIZATION ELECTRON TUBES LAMPS TV TUBES (CRT) REFRIGERATION AIR CONDITIONING DRYING DISTILLATION METALLURGY FREE DRYING CVD.LPCVD ION IMPLANTATION DRY ETCHING LOAD-LOCK CRYOGENICS GAS RECOVERY OXYGEN PUMPING S/N: 177900

DYMAX LIGHT-WELDER PC-3 MEDIUM INTENSITY UV SPOT LAMP OUTPUT POWER: 50 WATT THE INTENSITY IN THE UVA RANGE: UP TO 2,000 MW/2 DIMENSIONS OF ILLUMINATED AREA: UP TO 0.50" IN DIAMETER INCLUDES UV BOX GENERAL INFO: THE LIGHT-WELDER PC-3 IS A MEDIUM INTENSITY UV/VISIBLE LIGHT CURING LAMP USED FOR PINPOINT CURING OF UV ADHESIVES, COATINGS, AND POTTING MATERIALS. LIGHT IS GENERATED BY THE LAMP IN THE HOUSING AND TRANSMITTED THROUGH A FLEXIBLE LIQUID LIGHT GUIDE THAT EMITS A 5 MM DIAMETER SPOT OF UV/VISIBLE LIGHT FOR PRECISE CURING. THE LIGHT GUIDE CAN BE HAND-HELD FOR COMPLETE MOBILITY OR CLAMPED INTO POSITION ON ASSEMBLY EQUIPMENT OR WORK STATIONS FOR REPETITIVE OPERATIONS. THE PC-3 IS IDEAL FOR WIRE TACKING, COIL TERMINATING, SHALLOW POTTING, AND DISK DRIVE APPLICATIONS FOR THE ELECTRONICS, AEROSPACE, AND MEDICAL DEVICE ASSEMBLY INDUSTRIES. THE LAMP IS USER-FRIENDLY, EASY TO OPERATE, AND COST-EFFECTIVE. THE PC-3 CONSISTS OF A HOUSING CONTAINING A 50-WATT POWER SUPPLY, CIRCUIT PROTECTION, LAMP/REFLECTOR ASSEMBLY, COOLING FAN, LIGHT GUIDE MOUNT, NON-RESETTABLE HOUR METER, AND SHUTTER SYSTEM. ELECTRIC SHUTTERS ARE SUPPLIED WITH TIMED AND MANUAL SHUTTER OPERATING MODES. THE LIGHT GUIDE IS SEPARATE AND PLUGS INTO THE MOUNT. LIGHT IS NOT EMITTED FROM THE UNIT WHEN THE LIGHT GUIDE IS REMOVED. A SEPARATE FILTER MOUNTS ON THE OUTPUT END OF THE LIGHT GUIDE TO REDUCING VISIBLE LIGHT OUTPUT WHERE DESIRED. LAMPS ARE RATED AT 500 HOURS OF LIFE, HOWEVER, THE USEFUL LIFE OF 1,000 HOURS CAN BE EXPECTED FOR MOST APPLICATIONS.

CAMALOT TOGGLE HEAD FOR THE DISPENSING SYSTEM, WITH A HARD TRAVEL CASE. GENERAL INFO: SPEED, STABILITY, AND PRECISION ARE HALLMARKS OF CAMALOT DISPENSING MACHINES. INNOVATIVE GANTRY DESIGNS EVEN IN SMALLER, MORE COMPACT FOOTPRINTS ENABLE RAPID ACCELERATION FOR FASTER THROUGHPUT, WHILE AT THE SAME TIME PROVIDING BEDROCK STABILITY THAT ENABLES THE HIGHEST LEVEL OF PRECISION FOR APPLICATIONS RANGING FROM SOLDER PASTE TO UNDERFILL TO ADHESIVE DISPENSING AND ADVANCED JETTING TECHNIQUES.

WELLER EC2002M SOLDERING GUN WATTS: 60 VOLTS: 120 HZ: 60

2006 TABLETOP LAMINATOR DIMENSIONS: 22" X 11" X 5" VOLTS: 110 S/N: 9513766

USED - BLACK DISC STORAGE BOXES (INCLUDES 38 INNER SHELVES)

ULINE STEEL BANDING CART WITH TOOLS COMES WITH BAND, AND ALL TOOLS 1/4" BAND

CRAFTSMAN PORTABLE DUST COLLECTOR HP: 3/4 AMPS: 9 RPM: 3450 VOLTS: 120 HZ: 60

USED BLUE TABLE WITH BLACK TABLE TOP DOUBLE DECKER DIMENSIONS: 6' X 2.5' X 30" HEIGHT

USED BLUE INSPECTION TABLE WITH WHITE TOP WITH OVERHEAD LIGHTING AND 2 LOCKING STORAGE DRAWERS. THE TABLE HAS 9 PAIRS OF 110V OUTLETS.

CMIII CM3600 RTF SHEET LAMINATOR VOLTS: 110 HZ: 60 DIMENSIONS: 45" X 36" X 45" S/N: 2030

DAYTON (LARGE) CAPACITY: 12 GALLON VOLTS: 120 HARBOR FREIGHT (SMALL) CAPACITY: 5 GALLON VOLTS: 120

PROPANE HEATER S/N: A-764167

2002 MM-9M 9" MONITOR [VOLTS: 100-240 HZ: 50/60 AMPS: 0.4] S/N: KC411258 CEM-E12 12" MONITOR [VOLTS (AC): 117 HZ: 50/60 AMPS: 0.35] S/N: A99110990

2 WIRE SHELVES - 2 USED - WIRE SHELVES (WITH METAL TRAYS) DIMENSIONS : 18" WIDE

SCIENTIFIC METAL TABLE DIMENSIONS : 18" X 24" X 36"

9 NEW - TIE-BACK SURGICAL MASK 50 PK SOFT, COMFORTABLE. FOLDS UP FOR EASY CARRYING. FLUID RESISTANT. 99% BACTERIAL FILTRATION EFFICIENCY. TIE-BACK FOR COMFORT WHILE WEARING EYEGLASSES.

LAMBRO INDUSTRIES VINYL DUCT KITS

TEMPRESS AUTO SCRIBING MACHINE SERIAL NUMBER: 1226-C

TEKTRONIX 2445A 4 QUAD CHANNEL ANALOG OSCILLOSCOPE S/N: HZ: 150 GENERAL INFO: THESE OSCILLOSCOPES CAN TRIGGER ON ANY ONE OF THE FOUR CHANNEL. NEW AUTO-LEVEL CIRCUITRY GIVES YOU CONVENIENT HANDS-OFF TRIGGERING, EVEN WITH CHANGING TRIGGER-SIGNAL AMPLITUDES. WITH THE POSITION-INDEPENDENT TRIGGERING, TRIGGER LEVEL REMAINS CONSTANT WHENEVER YOU REPOSITION THE DISPLAY. AND THE TRIGGER-LEVEL READOUT ENABLES YOU TO PRESET THE AMPLITUDE FOR PREDICTABLE TRIGGERING ON BOTH LOGIC THRESHOLDS AND TRANSIENT EVENT. SINGLE-SEQUENCE TRIGGERING CAN CAPTURE A SINGLE EVENT OR MULTIPLE EVENTS BY DISPLAYING A SINGLE SWEEP OF EACH TRACE ON THE CRY. AT THE ENDS OF THE SEQUENCE, SCALE FACTORS AND OTHER READOUT DATA ARE BRIEFLY DISPLAYED AND GRATICULE ILLUMINATION FLASHES ON MOMENTARILY, ALLOWING WAVEFORM PHOTOGRAPHY. CAPABILITIES: 150 MHZ BANDWIDTH (DC TO 200 MHZ BANDWIDTH FOR 2445B) 4 INDEPENDENT CHANNELS (DUAL CHANNEL FOR 2445B) CURSORS AND READOUT 2 MV/DIV VERTICAL SENSITIVITY 1 NS/DIV SWEEP RATE (5 NS/DIV FOR 2445B) ADVANCED TRIGGER SYSTEM DELAYED SWEEP MEASUREMENTS (2445A/B ONLY) PROFESSIONALLY REFURBISHED ALIGNED AND CALIBRATED TO ORIGINAL SPECIFICATIONS SYSTEM OVERVIEW: THE TEKTRONIX 2445 IS A FOUR-CHANNEL ANALOG OSCILLOSCOPE THAT PRODUCES CLEARER VIEWS TO HELP SIMPLIFY COMPLEX MEASUREMENTS. THIS IS MADE POSSIBLE WITH A 1% HORIZONTAL SYSTEM ACCURACY AND A 2% VERTICAL DEFLECTION ACCURACY. ITS EXCEPTIONAL ELECTROMAGNETIC COMPATIBILITY MAKES IT WELL-SUITED FOR HIGH-RF SITUATIONS SUCH AS COMPUTER MANUFACTURING, SERVICING, AND TESTING. IT ALSO COMES WITH AN OVERLOAD PROTECTION IN CASE AN EXCESSIVE SIGNAL IS APPLIED DURING A 50 COUPLING THAT IS AUTOMATICALLY SWITCHED TO 1M TO PREVENT POSSIBLE DAMAGE. THE DEVICE IS UL LISTED AND ALSO CONFORMS TO CSA CERTIFICATION.

7 BIO FIT BLUE LEATHER LAB CHAIRS WITH HEPA FILTERS BOTTOMS WITH WHEELS. GENERAL INFO: VERSATILITY AND PERFORMANCE MAKE BRIDGEPORT SERIES SEATING A PREFERRED SOLUTION FOR LABORATORY AND TECHNICAL WORKSPACES. THIS DESK OR LOW BENCH HEIGHT MODEL FEATURES A COMFY ERGONOMIC SEAT, NIMBLE TRAPEZOID-SHAPED BACKREST AND ALUMINUM BASE. CHROME FINISH ON METAL PARTS. FEATURES: BIOFIT CHAIRS ARE ERGONOMICALLY DESIGNED FOR USER PERFORMANCE AND WELL-BEING. BUILT FOR STABILITY AND DURABILITY THEY SUPPORT A WEIGHT CAPACITY UP TO 350 POUNDS. ENGINEERED TO FIT YOUR WORK, LABORATORY, INDUSTRIAL, OR EDUCATIONAL SPACES, THESE CHAIRS OPTIMIZE COMFORT AND MOBILITY, AND HELP TO PROMOTE CREATIVITY AND PRODUCTIVITY IN ANY SETTING. CLEAN ROOM MODELS FOR ISO 3 - ISO 8 AVAILABLE. SEATING FOR STATIC-CONTROLLED ENVIRONMENTS (ESD) IS TESTED TO ANSI/ESD STM 12.1.

7 BIO FIT BLUE LEATHER LAB CHAIRS WITH HEPA FILTERS BOTTOMS WITH WHEELS. GENERAL INFO: VERSATILITY AND PERFORMANCE MAKE BRIDGEPORT SERIES SEATING A PREFERRED SOLUTION FOR LABORATORY AND TECHNICAL WORKSPACES. THIS DESK OR LOW BENCH HEIGHT MODEL FEATURES A COMFY ERGONOMIC SEAT, NIMBLE TRAPEZOID-SHAPED BACKREST AND ALUMINUM BASE. CHROME FINISH ON METAL PARTS. FEATURES: BIOFIT CHAIRS ARE ERGONOMICALLY DESIGNED FOR USER PERFORMANCE AND WELL-BEING. BUILT FOR STABILITY AND DURABILITY THEY SUPPORT A WEIGHT CAPACITY UP TO 350 POUNDS. ENGINEERED TO FIT YOUR WORK, LABORATORY, INDUSTRIAL, OR EDUCATIONAL SPACES, THESE CHAIRS OPTIMIZE COMFORT AND MOBILITY, AND HELP TO PROMOTE CREATIVITY AND PRODUCTIVITY IN ANY SETTING. CLEAN ROOM MODELS FOR ISO 3 - ISO 8 AVAILABLE. SEATING FOR STATIC-CONTROLLED ENVIRONMENTS (ESD) IS TESTED TO ANSI/ESD STM 12.1.