114 ReRun of Monthly Open Due to Azure Outage

2011 HYUNDAI WIA I-CUT380D VERTICAL MACHINING CENTER, X TRAVEL: 20.5 INCH Y TRAVEL: 15 INCH Z TRAVEL: 13.8 INCH SPINDLE SPEED: 12,000 RPM TABLE SIZE: 25.6 X 15.7 MAXIMUM TABLE LOAD: 551 LBS. SPINDLE TAPER: BT-30 SPINDLE MOTOR: 10 HP PALLET INDEX TIME: 6 SECONDS EQUIPPED WITH ATC: 24 CUTTING HOURS: 7,072 MACHINE WEIGHT: APPROX. 11,464 LBS MACHINE DIMENSIONS: APPROX. 66 X 93.5 INCH

2007 HAAS MDC-500 VERTICAL MACHINING CENTER, X-AXIS - 20 INCH Y-AXIS - 14 INCH Z-AXIS - 20 INCH POWER - 20 HP RPM - 7,500 RPM TAPER - CAT-40 PALLET SIZE - 20 X 12.75 MAX TABLE LOAD - 700 LBS AXIS# - 3 TOOL-TO-TOOL - APPROX. 2.2 SECONDS CHIP-TO-CHIP - APPROX. 4.8 SECONDS MAX TOOL DIAMETER - 33.6 MAX TOOL LENGTH - 16 MAX TOOL WEIGHT - 12 LBS RAPID TRAVERSE RATES - 1,000 IPM CUTTING FEED RATE - UP TO 833 IPM CONTROL - CNC (HAAS) DIMENSIONS - 130 INCH X 134 INCH X 113 INCH WEIGHT - 16,000LB EQUIPPED WITH DUAL PALLET CHANGER, SIDE-MOUNT 24+1 ATC, CHIP AUGER, COOLANT TANK

2011 HYUNDAI WIA I-CUT380D VERTICAL MACHINING CENTER, X TRAVEL: 20.5 INCH Y TRAVEL: 15 INCH Z TRAVEL: 13.8 INCH SPINDLE SPEED: 12,000 RPM TABLE SIZE: 25.6 X 15.7 INCH MAXIMUM TABLE LOAD: 551 LBS. SPINDLE TAPER: BT-30 SPINDLE MOTOR: 10 HP PALLET INDEX TIME: 6 SECONDS EQUIPPED WITH ATC: 24 CUTTING HOURS: 10,539 MACHINE WEIGHT: APPROX. 11,464 LBS MACHINE DIMENSIONS: APPROX. 66 X 93.5 INCH

2024 KNUTH FSM 480 SURFACE GRINDER, WORKING AREA: 8 X 18 INCH, SPINDLE AXIS-TO-TABLE SURFACE DISTANCE: 17.72 INCH, TRAVEL X-AXIS: 18.9 INCH, TRAVEL Y-AXIS: 9 INCH, TRAVEL DISTANCE PER HAND-WHEEL ROTATION, X-AXIS: 0.2 INCH, Y-AXIS: 0.2 INCH, Z-AXIS: 0.04 INCH, SCALE RING DIVISION X-AXIS: 0.00079 INCH, Y-AXIS: 0.00079 INCH, Z-AXIS: 0.0002 INCH, ROUGHNESS: >=063 M RA, POWER REQUIREMENTS: 230V/60HZ/3PH, EQUIPPED WITH EXHAUST VACUUM, WORK LAMP, MAGNETIC CLAMPING PLATE 5X11.75 INCH, BALANCING SHAFT, BALANCING STATION, ANGLE - ADJUSTABLE GRINDING VISE, GRINDING WHEEL FLANGE, GRINDING WHEEL DRESSER, GRINDING WHEEL, OPERATING TOOLS, OPERATOR MANUAL

2007 CHIYODA SP-60ST TUBE BENDER, MAX. DIA (STEEL PIPE - STANDARD WALL): 63.5 MM X 3.8 MM (2.5" X 0.14"), MAX. DIA (THICK-WALL STEEL PIPE): 60.5 MM X 4.5 MM (2.38" X 0.18"), BENDING RADIUS: 200 MM CENTER (7.87"), MAX R DIFFERENCE: 80MM (3.15"), MAX. BENDING ANGLE: 0 - 180 (TABLE ROTATION 190), BENDING DIRECTION: LEFT HAND, EFFECTIVE CHUCK LENGTH: MAX. 2300MM (90.5"), CHUCK CARRIAGE STROKE: MAX. 2230MM (87.8"), OPERATION SPEED: BENDING SPEED: 2.5 - 22 SEC/180, FEED SPEED: 200 - 700 MM/SEC, PLANE AXIS SPEED: 1.0 - 10 SEC./ 1 BEND, AVERAGE MACHINE TIME: 4 - 10 SEC. / 1 BEND, REPEATABILITY: BENDING: +/- 0.1, FEED: +/- 0.1MM, PLANE AXIS ROTATION: +/- 0.1, WEIGHT APPROX: 9000 LBS, DIMENSIONS: 180" X 65" X 70", EQUIPPED WITH UPDATED BENDPRO G2 CONTROL IN 2018

2011 HYUNDAI WIA I-CUT380D VERTICAL MACHINING CENTER, X TRAVEL: 20.5 INCH Y TRAVEL: 15 INCH Z TRAVEL: 13.8 INCH SPINDLE SPEED: 12,000 RPM TABLE SIZE: 25.6 X 15.7 INCH MAXIMUM TABLE LOAD: 551 LBS. SPINDLE TAPER: BT-30 SPINDLE MOTOR: 10 HP PALLET INDEX TIME: 6 SECONDS EQUIPPED WITH ATC: 24 CUTTING HOURS: 2,728 MACHINE WEIGHT: APPROX. 11,464 LBS MACHINE DIMENSIONS: APPROX. 66 X 93.5 INCH

2006 CINCINNATI CL7A 6 X 12 LASER CUTTING MACHINE, 4000K CO2 PLASMA, 6 X 12 TABLE, X/Y TRAVEL: 120"/60", Z-TRAVEL: 8", IPM: 3346, DIMENSIONS: 207X100X79 INCHES, WEIGHT: 32000 LB, EQUIPPED WITH LOWER PALLET SPECIAL FUNCTION, LOAD FRAME BALL TRANSFERS, NONCONTACT HEAD, REBUILT BALL SCREWS X, Y AND Z IN 2022, FANUC 4000-WATT RESONATOR, ALL PMS DONE BY CINCINNATI

2007 HYDMECH S20M SERIES III HORIZONTAL BAND SAW, CAPACITY: 13 INCH H X 18 INCH W 90 DEGREEES, 1 INCH BLADE, 3 HP BLADE DRIVE, 480 V, BLADE SPEED: 45-330 SFM, COOLANT TANK CAPACITY: 6 GALLONS, WORK LOAD: 5,000 LBS, MACHINE WEIGHT: 2200 LBS, TABLE HEIGHT: 31 INCH, DIMENSIONS: 92 INCH X 75 INCH X 52 INCH, EQUIPPED WITH ELECTRIC CONTROLS VICE

PACIFIC 135 TON PRESS BRAKE, TONNAGE: 135 TON, BENDING LENGTH: 10', BRAKING CAPACITY: 1/4 X 8, MAX PUNCH TONNAGE: 90 TON, TONNAGE CONTROL: YES, TONNAGE INDICATOR: YES, RELIEF VALVE SETTING: 1870, MOTOR: 230 V / 3-PHASE / 60 CYCLE, CONTROL CIRCUIT: 120 V / SINGLE PHASE / 60 CYCLE, APPROX WEIGHT: 10,000 LBS, DIMENSIONS: 175" X 65" X 65", EQUIPPED WITH LIGHT CURTAINS

2003 EMCO TURN 332MC HORIZONTAL TURNING MACHINE. BAR CAPACITY - 1.25 INCH MAX SWING OVER SLANT BED - 16 INCH MAX TURNING CAPACITY - 8.7 INCH MAX MACHINABLE CENTER DISTANCE - 20 INCH CROSS TRAVEL (X-AXIS) UPPER TURRET - 6.3 INCH LOWER TURRET - 5.5 INCH LONGITUDINAL TRAVEL (Z-AXIS) UPPER TURRET - 20.1 INCH LOWER TURRET - 20.1 INCH C-AXIS ON BOTH SPINDLES - .001 DEGREE TOOL POSITIONS (12 ON EACH TURRET) - 24 TOTAL SPINDLE NOSE - A2-4 SPINDLE SPEED RANGE - 50-8000 RPM SPINDLE HORSEPOWER - 17 HP COUNTER SPINDLE - 7000 RPM COUNTER SPINDLE HORSEPOWER - 13 HP LIVE TOOLING SPEED RANGE - 98-6000 RPM LIVE TOOLING HORSEPOWER - 6.8 HP APPROXIMATE MACHINE DIMENSIONS - 78 X 104 INCH APPROXIMATE MACHINE HEIGHT - 78 INCH APPROXIMATE MACHINE WEIGHT - 6700 LBS EQUIPPED WITH COOLANT TANK, CHIP CONVEYOR, PARTS CONVEYOR, (2) COLLETS, STATIC TOOLING, LIVE TOOLING. TURRETS REBUILT IN LAST 5 YEARS. 3 TRANSFORMERS REPLACED IN LAST 2 YEARS. CURRENTLY HAS A PLC FAULT RELATING TO THE ER MODULE.

HARIG 618 HYDRAULIC SURFACE GRINDER, CAPACITY: 6" X 18", LONGITUDINAL TRAVEL - X-AXIS: 20", CROSS TRAVEL - Z-AXIS: 6-3/4", GRINDING SPINDLE SPEED: 3,450 RPM, GRINDING WHEEL DIAMETER: 8", GRINDING WHEEL WIDTH: 1-1/4", GRINDING WHEEL HOLE DIAMETER: 1-1/4", VERTICAL WORKING HEIGHT UNDER: 7", SPINDLE MOTOR: 1 HP, EQUIPPED WITH O.S. WALKER ELECTRO MAGNETIC CHUCK (FINE PULL), ACU-RITE DRO, 2 GRINDING FIXTURES, MANUALS

GEKA CEP-11H IRON WORKER, 50 TON RATED CAPACITY (PUNCH END), 12 INCH THROAT DEPTH. PUNCH CAPACITY THROUGH 1.25 INCH PLATE (MILD STEEL). PLATE/FLAT BAR SHEARING UP TO 4 X 12 INCH. SHEAR BLADE LENGTH APPROX 8 INCH. SHEARING FLAT BARS 4 X 0.5 INCH AND 6 X 5/16 INCH. ANGLE SHEAR (90 DEG) 4 X 4 X 3/8 INCH. ANGLE SHEAR (45 DEG) 2 X 2 X 3/8 INCH OR 5/16 INCH. BAR SHEARING (ROUND) 1.375 INCH DIAMETER. BAR SHEARING (SQUARE) 1.25 X 1.25 INCH. 70 SPM STROKE RATE. 3 HP MOTOR, WIRED FOR 220 V. APPROX WEIGHT 4000 LBS. APPROX DIMENSIONS 64 X 50 X 84 INCH.

THIERICA ROTARY STYLE PARTS WASHER ROTARY TABLE DIMENSIONS: 17 INCH L X 17 INCH W WASHING & DRYING NUMBER OF TANKS: 1 SOLVENT USED: SOLVENTLESS HEAT SOURCE: ELECTRIC POWER REQUIREMENTS: 480V 3 PHASE

BARRETT CENTRIFUGAL CHIP SPINNER PAN DIAMETER: 30 INCH PAN DEPTH: 14 INCH PAN CAPACITY: 4.5 CUBIC FEET MAX LOAD: 425LB RUNNING SPEED: 900 RPM MOTOR POWER: 10HP DRAINS COOLANT FROM CHIPS FOR REUSE

2015 RACK ENGINEERING DIVISION SM84-60120-8 METAL SHEET LIFTER, SHELF SIZE: 60 INCH X 120 INCH, SHELF / ARM CAPACITY: 5500 LB (X8), TOP SHELF CAPACITY: 5500 LB (X1), APPROXIMATE WEIGHT: 16,500 LBS, DIMENSIONS W/ ANCHOR FEET: 140 INCH X 135 INCH X 84 INCH, EQUIPPED WITH 5500 LB SHELF ARM CAPACITY

2014 COMP AIR LFR2A COMPRESSOR, 150 PSIG, 20 HP, 3 PHASE, 83 CFM

HARDINGE HC SUPER PRECISION ENGINE LATHE, SPINDLE CAPACITY: W/ROUND 5C HARDINGE COLLETS: 1-1/16 INCH W/HEKSAGON 5C HARDINGE COLLETS: 7/8 INCH W/SQUARE 5C HARDINGE COLLETS: 3/4 INCH W/STEP CHUCKS: 1-1/16 INCH TO 6 INCH W/JAW CHUCKS: 6 INCH. SPINDLE NOSE DIAMETER: 2.189 INCH. SPINDLE NOSE THREAD: 2-3/16 INCH - 10 R.H. MAXIMUM FIXTURE DIAMETER: 9 INCH. MAXIMUM DISTANCE FROM FACE OF TURRET TO SPINDLE: 13 INCH. TRAVEL OF CROSS SLIDE: 4-1/2 INCH. CROSS SLIDE POWER FEED RANGE: 1/4 INCH TO 10 INCH PER MIN. SPINDLE SPEEDS: 3 SELECTOR VARIABLE SPEED MACHINES. LOW SPEEDS: 125 TO 1100 RPM. HIGH SPEEDS: 1100 TO 3000 RPM. WEIGHT OF MACHINE: 1750 LBS. DIMENSIONS: 72 INCH L-R X 28 INCH F-B X 64 INCH H. ELECTRICS: 220 VOLTS, 3 PH, 60 CYC. EQUIPPED WITH SONY DRO, AIR HANDLER, 8-STATION TOOL TURRET, COOLANT SYSTEM (INTEGRATED), FULL REAR SPLASH/CHIP GUARD, VARIABLE SPEED DRIVE.

1988 LVD 150 JS 10 PRESS BRAKE, 150 TONNAGE, 10' LENGTH, 15.75" OPEN HEIGHT (DAYLIGHT), 5.12" RAM STROKE, 100" DISTANCE BETWEEN UPRIGHTS, PRESS (FORMING) SPEED: 2-59 IN/MIN, RETURN SPEED: 326 IN/MIN, RAPID (APPROACH) SPEED: 368 IN/MIN, APPROX WEIGHT: 18000 LBS, APPROX FOOTPRINT: 135" X 68" X 112", EQUIPPED WITH BACKGAUGE

COLE-TUVE T/B-4 ROTARY MACHINE, CAPACITY: BEND THICKNESS (CAPACITY): 5/32 INCH (MILD STEEL), THROAT DEPTH: APPROX 18 INCH, EQUIPPED WITH 4 SETS OF TOOLING BACKSTOP

2015 ANVER MECHANICAL VACUUM LIFTER M150M-L W/L200M4-61-2/44, UNIT WEIGHT: 350LB, RATED LOAD CAPACITY: 2000 LBS, DIMENSIONS: 68 X 60 X 27 INCH, GENERATOR: M150M (81000081), ASME BTH-1 DESIGN CATEGORY: B, ASME BTH-1 SERVICE CLASS: 4

2004 DESMA 250-200 INJECTION MOLDING MACHINE, PLATE SIZE: 12.6 X 15.7 INCHES, PRESS FORCE: 28.1 TONS, PLATE SPACING: 14.6 INCHES, STROKE: 13.8 INCHES, INJECTION VOLUME: 7.9 IN3

2023 DOAS 20T HEATING/COOLING UNIT, 2500 SCFM, 2200 MAX RPM, -40F MINIMUM OPERATING TEMPERATURE, 100F MAX DISCHARGE TEMPERATURE, 23F DESIGN TEMPERATURE RISE. MOTOR: 2,000HP, 460VAC/ 3 PHASE/ 2.7 FULL LOAD AMPS. COMPRESSOR: 20T, 380-480VAC/ 3 PHASE/ 27 FULL LOAD AMPS.

2023 DOAS 40TON HEATING/COOLING AIR CONDENSING UNIT, 6000 SCFM, 1580 MAX RPM, -40F MAX AMBIENT OPERATING TEMPERATURE, 23F DESIGN TEMPERATURE RISE, 100F MAX DISCHARGE TEMPERATURE. MOTOR: 4800HP, 460VAC/ 3 PHASE/ 5 FULL LOAD AMPS. COMPRESSOR: (2) 20 TON COMPRESSORS, 380-480VAC/ 3 PHASE/ 27 FULL LOAD AMPS.

NUARC SPVF3650-PE SILKSCREEN MACHINE SCREEN FRAME SIZE (MAX): 36 50 INCH VACUUM FRAME INTERNAL SIZE (ID): 44 58 INCH OVERALL FOOTPRINT: 52 75 INCH SHIPPING / MACHINE WEIGHT: 459LBS