CANNABIS HEMP EQUIPMENT MULTILOCATION CONSIGNMENT AUCTION Powered by A2C

AGRON XL.40 CURING CHAMBER FOR CANNABIS FLOWER. 40 LBS FINISHED PRODUCT, 62 X 68 FOOTPRINT SPECS & FEATURES: FOUR (4) INDIVIDUALLY CONTROLLED CHAMBERS FOR DIFFERENT BATCHES AND STRAINS. EASY-TO-USE TOUCHSCREEN APP ALLOWS THE USER TO DYNAMICALLY CONTROL INTERNAL RH% BY SETTING THE VENTING PARAMETERS ON THE SLIDERS. THE ONLY AUTOMATED CURING OPTION FOR LARGE-SCALE COMMERCIAL GROWERS. AUTO CURE IS SELF-MONITORING AND VENTS ITSELF (AUTOMATIC BURPING) ENTIRELY AND PRECISELY AT THE EXACT MOMENT THAT THE FLOWER DICTATES. DESIGNED TO ELIMINATE MOLD. DIGITAL TOGGLE-SLIDER SYSTEM ALLOWS FOR EASY CHANGES FROM DRYING, CURING, AND STORAGE (EXTENDED CURING) VENTING PARAMETERS. REAL-TIME DATA LOGGING GRAPHICALLY DEPICTS THE RATE OF MOISTURE RELEASE FROM THE DRYING/CURING FLOWER OVER TIME, PROVIDING A VALUABLE TOOL FOR STANDARDIZATION AND BRAND CONSISTENCY AUTOCURE IS SELF-MONITORING AND SELF-ADJUSTING THROUGH ITS CUSTOM DESIGNED SOFTWARE APPLICATION WHICH IS DISPLAYED ON A 7 TOUCHSCREEN. SET THREE DIGITAL SLIDERS TO DESIRED VENTING PARAMETERS, AND LET AUTOCURE DO THE REST OF THE WORK. ALL CURING DATA GENERATED FROM AUTOCURE'S VENT CYCLES IS LOGGED TO A SECURED ONLINE PORTAL WHICH CUSTOMERS ARE ABLE TO ACCESS VIA PROGRAMMED WITH A MANUAL CYCLE FEATURE THAT ALLOWS THE USER TO VENT THE MACHINE AT WILL. ANALYZE AND STANDARDIZE THE CURING PROCESS AND THE FINAL PRODUCT READY FOR SALE. PRODUCES PRODUCT WITH IMPROVED CONSISTENCY, POTENCY, AND DECREASED WASTE. -HARDWARE: 2.75 VENTILATION FANS, HEAVY-DUTY VENTING SERVOS -DISPLAY: 7" LCD TOUCHSCREEN -MATERIAL: LABORATORY-GRADE ACRYLIC

TAEVO TECH-081 INDUSTRIAL PROCESS WATER CHILLER SPECS & FEATURES: -COOLING CAPACITY: 7.5 TON (CAPACITY BASED ON 45F WATER OUTLET TEMP.; 10 DEGREES F DELTA T @ 95 DEGREES F AMBIENT TEMPERATURE) -BTU/HR: 90,000 -RESERVOIR CAPACITY: 37 GALLONS -WATER FLOW (MIN/MAX): 11.1/ 42.3 GAL/MIN -AVAILABLE HEAD PRESSURE (MIN/MAX): 22.2/ 42.6 PSI -TOTAL AIR FLOW: 5825 CFM -TOTAL ABSORBED POWER : 2.38 KW -PUMP POWER : 0.90 KW -FAN POWER: 1.03 KW -DIMENSIONS: WIDTH: 29.9 IN X DEPTH: 73.4 IN XHEIGHT: 57 IN -ELECTRICAL: VOLTS/PHASE: 460/3 HZ: 60 FLA: 30. COMPRESSOR(S) FOR EACH CIRCUIT: 1 FAN(S): 1 -REFRIGERANT: R410A -PROTECTION CLASS: IP 54

DELTA SEPARATIONS CUP-15 ETHANOL EXTRACTION SYSTEM. CAPACITY: 8-14 LBS/BATCH W/ (3) KEGS. SPECS & FEATURES: -PRODUCTION CAPACITY: 8-14 POUNDS OF PLANT MATERIAL PER BATCH (DEPENDING ON MILL SIZE) -AVERAGE RUN TIME IS 10-20 MINUTES (DEPENDING ON SOP) -APPROXIMATE 300 LBS (135 KILOGRAMS) PROCESSING PER 8 HOUR SHIFT ALCOHOL REQUIREMENT IS 12-13 GALLONS (45-49 LITERS) PER RUN. -MAIN PANEL CONTROL PANEL ALL WETTED PARTS ARE 304 AND 316L SANITARY STAINLESS STEEL. -LOT INCLUDES: (3) KEGS, (1) 3RD PARTY CONTROL PANEL, AND (1) LENTICULAR FILTER, AND HOSE ATTACHMENTS (PICTURED).

SUNTHAI LPG5 FALLING FILM EXTRACTOR & RECOVERY SYSTEM. SPECS & FEATURES: -RECOVERY RATE OF 35-45 GALLONS PER HOUR. -JACKTED CONDENSER COLUMN. -INCLUDES (10) 5L COLLECTION POT. 50 LITER ETHANOL RECOVERY TANK. H -EIGHT: 2.5 METERS. MOUNTED ON CASTERS.

PINNACLE 40 DEGREES C ETHANOL SYSTEM W/ ICS SKID, G&D MODEL 14-2LC, HUBER CC-902. INCLUDES ICS SKID, G & D CHILLER MODEL 14, AND HUBER REFRIGERATED/BATH CIRCULATOR MODEL CC-902. CLOSED LOOP SYSTEM DESIGNED FOR SAFETY SPECS & FEATURES: -INITIAL COOL-DOWN: 2 HOURS -CONTINUOUS -40C AT 60 GAL/HR -REDUCES OVERALL ETHANOL USAGE -AUTOMATED FILLING, CHILLING, AND DISCHARGE TO EXTRACTION SKID -SUPPORTS AES SYSTEM TO IN-LINE CHILLING -C1D2 RATED, THIRD PARTY ENGINEER PEER REVIEWED, GMP COMPLIANT -SEE PICTURES FOR SPECS ON G & D CHILLER & HUBER CC-902. LOT INCLUDES: -INCLUDES ICS SKID, G&D CHILLER MODEL 14, AND HUBER REFRIGERATION/BATH CIRCULATOR MODEL CC-902 -200 GALLON INSULATED CLEAN SOLVENT STORAGE -90 GALLON JACKETED AND INSULATED SOLUTION HOLDING TANK -PNEUMATIC CONTROL VALVES -LIQUID LEVEL SENSOR -TEMPERATURE MONITORING CONTROLS -PINNACLE STAINLESS CUSTOM HEAT EXCHANGER -LIQUID DRIVE PUMP WITH CUSTOM SEALS

LAB 1ST 100 LITER JACKETED GLASS REACTOR ESSENTIAL EQUIPMENT FOR MIXING, REACTION, DISTILLATION AND FILTRATION IN CHEMISTRY AND PHARMACEUTICAL INDUSTRIES. SPECS & FEATURES: -TEMPERATURE RANGE: -60 DEGREES C TO 200 DEGREES C. -ALL THE WETTED PARTS ARE MADE OF BORO 3.3 GLASS OR PTFE. -ZERO-DEAD-SPACE BOTTOM VALVE DESIGN. LOT INCLUDES: -MAIN JACKETED APPARATUS -STIRRING MOTOR -CONDENSER -PRESSURE EQUALIZING FUNNEL -STAINLESS STEEL 304 SUPPORT FRAME -LOCKABLE CASTERS.

BUSCH RC0100.E5Z6.1006 TWO-STAGE RECIPROCATING VACUUM PUMP SYSTEM W/ RECEIVER TANK MOUNTED. SPECS & FEATURES: -EACH PUMP IS A MODEL RC0100.E5Z6.1006 VACUUM PUMP RATED FOR 15 TORR. -EACH PUMP HAS A 5 HP TOSHIBA MOTOR. 1720 RPM. 3/60/230/460 V. -INCLUDES START AND STOP PANEL.

HAL EXTRACTION 25H C1D2 HOOD ENVIRONMENT FOR ETHANOL EXTRACTION, POST-PROCESSING. SPECS & FEATURES: INTERIOR: 25 SQFT. EXTERIOR WIDTH: 10 FT. EXTERIOR DEPTH: 3 FT 6.5 IN. EXTERIOR HEIGHT: 8 FT 5 IN. INTERIOR HEIGHT: 8'5". -MINIMUM BASE AIR FLOW RATE: 500 CFM. MINIMUM PURGE AIR FLOW RATE: 1500 CFM. -EXPLOSION-PROOF, CLASS I, DIVISION 1, 2-TUBE INTERIOR LIGHT FIXTURES. -EXTRA-LONG LIFE, FLAMMABLE GAS INFRARED SENSOR. MAKE-UP AIR AND EXHAUST VENTILATION SYSTEM. SLIDING DOORS WITH VENTILATION SLOTS AND WINDOWS. -CROSS-CAPTURE VENTILATION. PROFESSIONAL ENGINEER PEER-REVIEWED DESIGN. PEER-REVIEWED BY PRESSURE SAFETY INSPECTORS (PSI). -EXPLOSION-PROOF EXHAUST AND SUPPLY FANS. LIGHT AND SOUND ALARM SET TO GO OFF AT 10% AND 25% OF LEL, RESPECTIVELY. -FULLY COMPLIANT WITH OSHA, NFPA, NEC REGULATIONS.

USED- 100 GALLON LOW PRESSURE STAINLESS STEEL VACUUM TANK. ELECTRO POLISHED INTERIOR AND EXTERIOR. USED SINCE NEW AS A COLLECTION VESSEL FOR ETHANOL AND ESSENTIAL OIL SOLUTION. REMOVABLE HINGED LID WITH SILICONE GASKET. NARROW DESIGN WITH HANDLE AND WHEELS ALLOWS FOR MOBILITY BY A SINGLE OPERATOR SPECIFICATIONS: 12 GAUGE 304 STAINLESS STEEL CONSTRUCTION 24" DIAMETER 83" FROM FLOOR TO HIGHEST POINT CENTER BOTTOM DRAIN IS 18" FROM FLOOR ELECTRO POLISHED INTERIOR AND EXTERIOR

USA LAB RE-1050 ROTARY EVAPORATOR ROTOVAP W/ ELECTRIC LIFT SYSTEM. 50 LITER CAPACITY. SPECS & FEATURES: -50L EVAPORATION FLASK CAPACITY -20L COLLECTION FLASK CAPACITY -20-120 RPM ROTARY SPEED -BATH TEMPERATURE RANGE: ROOM TEMP TO 180 DEGREES CELSIUS (365 DEGREES F) -POWER REQUIREMENTS: ELECTRIC LIFTING MECHANISM, 220-240V 60HZ 30A SINGLE PHASE -TEMPERATURE CONTROL ACCURACY=+/-1 DEGREES CELSIUS -MOTOR WATTAGE: 250W -HEATER BTU'S: 22,000BTU -WATER BATH VOLUME: 77L -GC-17 BOROSICATE GLASS

TWISTER BATCHONE DRY TRIMMER. THROUGHPUT OF 88 LBS/HR DRY. BATCH-STYLE WORKFLOW. INDUSTRY LEADING HORSEPOWER TO MITIGATE STALLING. BUILT SPECIFICALLY FOR CULTIVATORS WHO PREFER DRY TRIMMING AND A BATCH-STYLE WORKFLOW. SPECS & FEATURES: -THROUGHPUT OF 88 LBS/HR DRY. -QUICK RELEASE TUMBLER. MOUNTED ON 360 DEGREE CASTERS. -GFCI COMPATIBLE. -CAN BE SAFELY USED IN A WET AREA. -63" LENGTH X 32" WIDTH X 48" HEIGHT. UL & CSA COMPLIANT.

CASCADE SCIENCES CVO-5 VACUUM OVEN. BENCHTOP SET UP. CVO-5 VACUUM OVEN OFFERS INCREDIBLE TEMPERATURE STABILITY FOR VACUUM DRYING AND PURGING OF PHARMACEUTICALS, BOTANICALS, SLURRIES, OR ANY TEMPERATURE SENSITIVE MATERIAL. SPECS & FEATURES: -5 REMOVABLE, HEIGHT ADJUSTABLE ALUMINUM SHELVES. -PASSIVE FILTER TRAP ON VACUUM PUMP INLET. -CONNECTIONS: 3/8TH VACUUM RATED TUBING -KF-16 CONNECTION HARDWARE. -STABLE TEMPERATURE CONTROL -DIGITAL TEMPERATURE READOUT WITH TEMP SENSOR INSIDE THE OVEN. -WELCH VACUUM PUMP (2052C-02) INCLUDED. -PUMP INTERIOR IS MADE OF SOLVENT RESISTANT, PTFE DIAPHRAGMS. -BOTH OVEN AND PUMP CAN RUN OFF A SINGLE DEDICATED 120V / 1PH / 20 AMP CIRCUIT.

USED SRI INSTRUMENTS 8610C CANNABINOID GAS CHROMATOGRAPH. FOR MEASUREMENT OF CANNABINOIDS - SPECS & FEATURES: -CARRIER: HYDROGEN AT 20ML/MINUTE -INJECTOR: AMBIENT: 300 DEGREES C -DETECTOR: FID -FLAME IONIZATION DETECTOR ( FID ) -HEATED FLASH INJECTION PORT -15 METER CAPILLARY COLUMN -BUILT-IN WHISPER-QUIET AIR COMPRESSOR -OPTIONAL COLUMNS PERMIT TERPENE, RESIDUAL SOLVENT MEASUREMENT -DETECTOR TEMPERATURE: AMBIENT-400 DEGREES C -BUILT-IN 12 POSITION 50 DEGREES C INCUBATOR SPEEDS UP THE EXTRACTION PROCESS, AND IS USEFUL IN DISSOLVING CONCENTRATES AND/OR BUTTERS. -MEASUREMENT OF THCA AND CBDA POSSIBLE WITH WITH FURTHER SAMPLE PREPARATION -SAMPLES THAT CAN BE TESTED: FLOWER, EXTRACTS, INFUSIONS, AND MOST EDIBLES LOT INCUDES: -STANDARD COLUMN: 15M X 0.53MM I.D. 0.16UM MXT-500, RESTEK (CANNABINOID POTENCY) -OPTIONAL COLUMNS: 30M X 0.53MM I.D. 1.00UM MXT-WAX -RESTEK (TERPENES); 3' HAYESEP D PACKED COLUMN (RESIDUAL SOLVENTS) -DATA SYSTEM AND SOFTWARE: PEAKSIMPLE DATA SYSTEM, AND PEAKSIMPLE SOFTWARE -SPARE INCLUDE:

NORTH STAR ENGINEERING PRODUCTS 755 EXPLOSION PROOF ELECTRIC BASKET CENTRIFUGE. SPECS & FEATURES: -100 POUND MAXIMUM DRY WEIGHT BASKET CAPACITY. -16" BASKET HEIGHT. 30" BASKET DIAMETER. 1740 RPM BASKET SPEED. -FLUID DRIVE, BELT DRIVEN, 480V, 5 HP -80 PSI OF AIR AT 1 CFM; 20-30 POUNDS PER SPIN. -ADJUSTABLE RUN TIMES UP TO 10 MINUTES. FUME PURGE SYSTEM. SKID MOUNTED WITH LEVELING PAD. UL 508A CONTROL. LOT INCLUDES: -MAIN APPARATUS -OIL CONCENTRATION METER THAT INCLUDES: -EXPLOSION PROOF METER -WELDING & PIPEFITTING IN EXISTING SKID

EXTRAKTLAB DRAINDROYD VACUUM FILTRATION SYSTEM. WAX REMOVAL VIA WINTERIZED ETHANOL SOLUTIONS - USED-EXTRAKTLAB DRAINDROYD VACUUM FILTRATION SYSTEM. MAKES HIGH-THROUGHPUT WAX REMOVAL FROM WINTERIZED ETHANOL SOLUTIONS. SEPARATES FATS, WAXES AND OTHER SOLIDS FROM HEMP OR BOTANICAL EXTRACTS. SPECS & FEATURES: -PROCESS: POURING A WINTERIZED ETHANOL/CRUDE OIL MIXTURE THROUGH A FILTER PAPER THAT CAPTURES THE REMAINING SOLIDS WHILE THE DESIRED LIQUID IS PULLED THROUGH A FUNNEL VIA VACUUM INTO A COLLECTION VESSEL OR FLASK -FILTRATION RATES OF UP TO 5 LITERS IN 5 MINUTES. -ALL 316 STAINLESS STEEL CONSTRUCTION FOR SUPERB CLEANABILITY -VARIOUS FILTER MEDIA AVAILABLE FOR DIFFERENT LEVELS OF FINISH; OPTIONAL INCORPORATION OF VARIOUS SORBENT MEDIA FOR DECOLORIZATION -ADJUSTABLE HEIGHT CASTERS FOR PORTABILITY; INCORPORATION OF CONTAINMENT VESSEL FOR IMPROVED ISOLATION FROM THE ENVIRONMENT -GMP COMPLIANT INTEGRATED PRODUCT CONTAINMENT FOR SAFETY AND CONTAMINATION ELIMINATION. -150 L RESERVOIR VOLUME, UP TO 80 DEGREES C OPERATING TEMPERATURE, 4 GALLON COLLECTION VOLUME, -DIMS: 24" X 24" X 43", APPROXIMATE 75 LBS.

ULTRA TRIMMER INDUSTRIAL UNIT AUTOMATIC TRIMMER. SCISSOR TRIMMED FINISH FOR QUALITY FLOWER RESULTS. SPECS & FEATURES -CAN TRIM 1 LB IN 5 MINS (26,000 CLIPS PER MINUTE) WITHOUT DESTROYING TRICOMES -SNIPS BUD AT (ADJUSTABLE BY USER) SPEED WITH A MAX OF 232 SNIPS PER REVOLUTION -BACK AND FORTH MOTION ENABLES SELF-CLEANING ACTION -COMES WITH A ROCKER ARM FOR ADDITIONAL MOTION

UT 400 ULTRA TRIMMER. INCLUDES CUSTOM STAINLESS STEEL TABLE WITH CASTERS. SPECS & FEATURES: -150 LBS DRY WEIGHT / TRIMS 1 LB EVERY 3-5 MINUTES -CUTTING DECK IS 24" X 96" -OVERALL SIZE IS 24" X 108" FOOD GRADE STAINLESS STEEL. SAME MATERIALS USED IN FOOD PROCESSING -SAVES 50-75% OF PRODUCTION TIME WITHOUT DESTROYING TRICHOMES -ONE LOOK AT THIS SHOWS YOU HOW BIG IT IS. PICTURES HARDLY DO IT JUSTICE. SIMPLY PUT, THIS IS A TRIMMING FORCE TO BE RECKONED WITH. -PARTS - ALL PARTS ARE REPLACEABLE AND IN STOCK FROM OEM LOT INCLUDES: -MAIN TRIMMING APPARATUS -CUSTOM BUILT TABLE THAT MAKES PROCESSING WITH THIS MACHINE EASIER (END USER BUILT IT THEMSELVES)

CRCFILTERS EDH-25, EV-2.5 ETHANOL EVAPORATION/CONDENSING/DRYING SETUP. APPROX 5-7 GALLONS PER HOUR. 6 VESSEL SETUP ALLOWS FOR UP TO 6 DIFFERENT BATCHES / STRAINS TO RUN SIMULTANEOUSLY. 25LB MOLECULAR SIEVE COLUMN REMOVES WATER AND INCLUDES WATER SATURATION INDICATOR. SET UP INCLUDES EVERYTHING SHOWN INCLUDING SHELVING RACK, CONDENSER, CRCFILTERS EDH-25 ETHANOL DEHYDRATION AND CRCFILTERS EV-2.5 EVAPORATION VESSELS, MIDEA 1500 WATT 110V INDUCTION BURNERS AND ELECTRICAL WIRING. ELECTRICAL IS NOT EXPLOSION PROOF BUT CAN BE EASILY CHANGED OUT. PALLET RACK - FEATURES: 80 WIDE X 120 HIGH X 20 DEEP WITH 3 LEVELS. BENCH TOP LEVEL HAS STAINLESS STEEL TOP (6 QTY). CRCFILTERS EV-2.5 VESSELS FEATURES: TOTAL 15 GALLON BATCH CAPACITY. STAINLESS STEEL CONSTRUCTION WITH CAMLOCK FITTINGS AND SIGHT GLASS. FULLY WELDED CONSTRUCTION. AIR COOLED CONDENSER: FEATURES: AIR COOLED BY 1800 CFM FAN WHICH WILL BRING SOLVENT TO AMBIENT TEMPERATURE. STAINLESS STEEL INTERNAL COILS. STANDARD AIR FILTER FOR SHELL. TWO VENT PORTS FOR DRUM VENTING AND OTHER AS NEEDED. 140 SHELL CONNECTS TO STANDARD DUCT FOR EXTERIOR VENTING. COMES MOUNTED TO RAILS WHICH FIT DIRECTLY ON THE PALLET RACK CROSS MEMBERS WITHOUT THE NEED FOR ANY FASTENERS. CRCFILTERS EDH-25 ETHANOL DEHYDRATION SYSTEM FEATURES: 25LB MOLECULAR SIEVE COLUMN AND 55GALLON STAINLESS STEEL COLLECTION DRUM. OVERALL FEATURES: SINGLE SWITCH POWER SUPPLY. RUNS AT ATMOSPHERIC PRESSURE SO NO ADDITIONAL PUMPS ARE NEEDED. GRAVITY DRAIN SO NO ADDITIONAL PUMPS ARE NEEDED. EVAPORATES BETWEEN 5 TO 7 GALLONS PER HOUR DEPENDING ON SET-UP TEMPERATURES. CAPABLE OF EVAPORATING UP TO 6 DIFFERENT EXTRACTION BATCHES / STRAINS SIMULTANEOUSLY. ETHANOL DRYER REMOVES OVER _ GALLON OF WATER PER COLUMN AND INCLUDES CHANGE OUT INDICATOR. INSTALLATION / ASSEMBLY THAT WILL BE REQUIRED: PALLET RACK SHELVING SNAPS TOGETHER WITH RUBBER MALLET. COMPONENT LINE HOOK UPS ( BY QUICK CONNECT CAMLOCKS NO TOOLS REQUIRED ). CONDENSER SHELL WILL NEED TO BE CONNECTED TO EXTERIOR VENT ( FLEXIBLE DUCT CONNECTING LINE NOT INCLUDED ). ELECTRICAL HAS SINGLE POWER WIRE CONNECTION.

EASTEY EM1622-TKV1 SHRINK WRAP L-SEALER AND TUNNEL. SPECS & FEATURES: -SEAL SIZE OF 16" X 22" OR 16" X 36". MAXIMUM FILM WIDTH UP TO 19". -SEALING A WIDE VARIETY OF FILMS INCLUDING POLYOLEFIN, POLYETHYLENE, AND PVC. SEAL HEAD CASTING EQUIPPED WITH HEAD RETURN CYLINDER. -DUAL LOCKING MAGNET CLAMPS APPLY EVEN PRESSURE ACROSS SEAL BAR. -TAKEAWAY CONVEYOR CAN BE RAISED OR LOWERED TO CENTER-SEAL PRODUCT. -WELDED ON 12 GAUGE STEEL FRAMES, CAST SEAL ARMS, STAINLESS STEEL FILM CLAMPS, AND HEAVY DUTY DUAL MAGNET CLAMPING. -ELECTRICAL: SHRINK TUNNEL IS 220 VOLT/3 PHASE/ 25 AMPS....SEALER IS 220 VOLT/ SINGLE PHASE/ 10 AMPS

MEYERCORD M120 STAMPING MACHINE. SPECS & FEATURES: -STAMPING SPEED: +/- 90 CARTONS PER MIN. -GROSS WEIGHT: 680 LBS. -ELECTRICAL REQUIREMENTS: 120VAC, 30 AMPS -AIR REQUIREMENTS: 100 PSI @ 10 SCFM. LOT INCLUDES: -SINGLE HEAD M120 STAMP MACHINE. -BUILT ON SKID -AIR COMPRESSOR -SPX DELTECH HEATER MODEL HG10-115 -BINKS COLD GLUE CONTAINER/DISPENSER (MAX WORKING PRESSURE 80 P.S.I.) -LATERAL CONVEYOR. (TRANSPORTS UNSTAMPED CARTONS INTO STAMP MACHINE VIA MOVING BELTS). -TABLE FOR PACKING. (STEEL TABLE WITH SLANTED TOP FOR CATCHING STAMPED CARTONS OF CIGARETTES).

EZ TRIM SATELLITE CANNABIS TRIMMER- 44 LBS/HOUR (FRESH FLOWER) OR 11 LBS/HOUR (DRIED FINISHED FLOWER) SPECS & FEATURES: -AVG. THROUGHPUT WET: 20,000 GRAMS (44 LBS) PER HOUR OF FRESH FLOWER OR 5,000 GRAMS (11 LBS) PER HOUR OF DRIED FINISHED FLOWER. -AVG THROUGHPUT DRY: 15,000 GRAMS (33 LBS) PER HOUR OF DRIED FINISHED FLOWER. -PROPERLY ADJUSTING THE CUTTING BLADE AND IMPLEMENTING THE DIFFERENT GRATES FOR WET AND DRIED PRODUCT WILL ENSURE A QUALITY TRIM WITHOUT DAMAGING FLOWERS. -ALLOWS YOU TO WATCH THE PRODUCT AS IT IS BEING TRIMMED, AND ADJUST CYCLE TIMES, BASED ON WHAT YOU SEE DURING EACH BATCH. -FILTRATION SYSTEM COMES WITH FOUR COLLECTION BAGS WHICH HAVE VARYING MICRON LEVELS FOR SEPARATING AND COLLECTING THE LEAF AS ITS TRIMMED. -THIS PRODUCT FROM THIS LEVEL IS GOOD FOR EXTRACTION AND SEPARATES MOST OF THE CHLOROPHYLL FILLED LEAF. --THE FIRST BAG COLLECTS THE LARGER LEAF & STEM---THE SECOND BAG COLLECTS YOUR SWEET LEAF MAKING IT EXCELLENT FOR EXTRACTION & PRE-ROLLS.---THE THIRD BAG IS YOUR B GRADE KEIF (GREEN), AND THE FOURTH BAG IS YOUR A GRADE KEIF (GOLD). -SEPARATING THE TRIM AND KEIF HAS A LOT OF UPSIDE FOR BOTH THE EXTRACTION AND CREATING NEW REVENUE STREAMS. -BAGS CAN ALSO BE UTILIZED FOR MANUAL DRY SIFTING. COMES WITH DRY TRIM GRATE, WILL NEED NEW SET OF COLLECTION BAGS.

GRANVILLE HEMP FLOWER EXTRACTOR & SHAKER TABLE WITH VACUUM SYSTEM. SPECS AND FEATURES: -THE FLOWER EXTRACTOR SYSTEM CAN EFFICIENTLY STRIP AND CLEAN 13,000 LBS OF WET MATERIAL AFTER BEING DRIED IN LESS THAN 4 HOURS. EASILY SEPARATE BIOMASS LEAVING YOU WITH CBD RICH MATERIAL. DIMS: 67" TALL X 92" LONG X 72" WIDE. ESTIMATED WEIGHT: 1500LBS. POWER: 20HP THREE PHASE OPTION WIRED ON LOW VOLTAGE 230/240VOLT -(1) 16' PICKING CONVEYOR WITH 36" WIDE SLICKTOP BELT. DIMS: 18" TALL WITHOUT LEGS ATTACHED X 42" WIDE (MOTOR MAKES 50" WIDE FOR HAULING) X 16' LONG. POWER: DANFOSS VFD IN CONTROL BOX WITH SHAKER VFD - 240VOLT 30AMP. ESTIMATED WEIGHT: 450LBS -(1) 18' INFEED CONVEYOR TO FLOWER EXTRACTOR DIMS: 18' LONG X 24" WIDE X 76" TALL -(1) HEMP SHAKER TABLE. DIMS: 91" LONG X 39" WIDE X 36" TALL ESTIMATED WEIGHT: 1200LBS -(1) SHAKER OUTPUT CONVEYOR. 12" WIDE X 108" LONG WITH HABASIT MATTE TOP BELT 1/3 HP INVERTER DUTY DRIVE, 20 TO 1 RATIO.

WEST TUNE WTCP-4030 RAPID COOLING RECIRCULATING LABORATORY WATER CHILLER W/ 20L/MIN PUMP. SPECS & FEATURES: -CHAMBER VOLUME:30 L (7.9 GALLON) -TEMPERATURE RANGE:-40 DEGREES C TO RT -WORKING CONDITION:-15DEGREES C ~ 25 DEGREES C -TYPE: WATER-COOLED CIRCULATOR/CHILLER -ELETRICAL: VOLTAGE:220V 60HZ SINGLE PHASE. POWER:6300W AT 0 DEGREES C -DIMENSIONS: (L*W*H):32.2 X 28.3 X 52" -CONTROLLER:PID CONTROLLER WITH LCD 7" TFT TOUCH SCREEN -CHAMBER MATERIAL:304 STAINLESS STEEL, POLISHED LOT INCLUDES: -MAIN APPARATUS -CIRCULATING PUMP: 0~20 LITERS/MINUTE, -BUILT IN ADJUSTABLE COMPRESSOR:DANFOSS (MADE IN GERMANY)

EZ TRIM SATELLITE CANNABIS TRIMMER- 44 LBS/HOUR (FRESH FLOWER) OR 11 LBS/HOUR (DRIED FINISHED FLOWER) SPECS & FEATURES: -AVG. THROUGHPUT WET: 20,000 GRAMS (44 LBS) PER HOUR OF FRESH FLOWER OR 5,000 GRAMS (11 LBS) PER HOUR OF DRIED FINISHED FLOWER. -AVG THROUGHPUT DRY: 15,000 GRAMS (33 LBS) PER HOUR OF DRIED FINISHED FLOWER. -PROPERLY ADJUSTING THE CUTTING BLADE AND IMPLEMENTING THE DIFFERENT GRATES FOR WET AND DRIED PRODUCT WILL ENSURE A QUALITY TRIM WITHOUT DAMAGING FLOWERS. -ALLOWS YOU TO WATCH THE PRODUCT AS IT IS BEING TRIMMED, AND ADJUST CYCLE TIMES, BASED ON WHAT YOU SEE DURING EACH BATCH. -FILTRATION SYSTEM COMES WITH FOUR COLLECTION BAGS WHICH HAVE VARYING MICRON LEVELS FOR SEPARATING AND COLLECTING THE LEAF AS ITS TRIMMED. -THIS PRODUCT FROM THIS LEVEL IS GOOD FOR EXTRACTION AND SEPARATES MOST OF THE CHLOROPHYLL FILLED LEAF. --THE FIRST BAG COLLECTS THE LARGER LEAF & STEM---THE SECOND BAG COLLECTS YOUR SWEET LEAF MAKING IT EXCELLENT FOR EXTRACTION & PRE-ROLLS.---THE THIRD BAG IS YOUR B GRADE KEIF (GREEN), AND THE FOURTH BAG IS YOUR A GRADE KEIF (GOLD). -SEPARATING THE TRIM AND KEIF HAS A LOT OF UPSIDE FOR BOTH THE EXTRACTION AND CREATING NEW REVENUE STREAMS. -BAGS CAN ALSO BE UTILIZED FOR MANUAL DRY SIFTING. COMES WITH DRY TRIM GRATE, WILL NEED NEW SET OF COLLECTION BAGS.

VIKING HL4197-SEP1 PUMP. SPECS & FEATURES: -NOMINAL PUMP RATING: 30 GPM. ( 0 TO 75 GPM CAPACITY. VISCOSITY: 28 TO 25,000 SSU / 1-5500 CST). -MAX RPM: 1800. PRESSURE RATED FOR UP TO 200 PSI OR 14 BAR. -OPERATING TEMPERATURE: 0 TO 350 DEGREES F (-18 TO 177 DEGREES C).

6 STAGE STAINLESS STEEL COLUMN SET UP. PREVIOUSLY USED FOR MULTI-STAGE SEPARATION OF CBD OIL. EACH COLUMN RESTS ON PINS FOR EASY REMOVAL AND EACH IS ADJUSTABLE ALONG THE LENGTH OF ALUMINUM FRAME. EACH END CAP HAS DIFFUSER / FILTER PLATE. SPECIFICATIONS: -6 TOTAL STAINLESS STEEL COLUMNS -ALUMINUM MOUNTING RACK -8 DIAMETER X 38 LONG COLUMN -HINGED BOTTOM CAP WITH 1.5 TRICLAMP ADAPTER -TOP CAP WITH 1.5 TRICLAMP ADAPTER -34 NPT SIDE NIPPLE -ELECTRO POLISHED INTERIOR AND EXTERIOR -EACH END CAP HAS A DIFFUSER / FILTER PLATE ON TOP AND BOTTOM CAPS -DIMENSIONS: 42W X 48 L X 82 H

GRECO SCIENCE GPEN AUTOMATIC CARTRIDGE FILLER FOR FILLING GPEN CARTRIDGES. SPECS & FEATURES: -INCLUDES TWO TRAYS FOR GIO CARTRIDGES AS WELL AS TWO TRAYS FOR GPEN DISPOSABLE VAPE DEVICE. -DIMENSION: LENGTH 830MM X WIDTH 520MM X HEIGHT 455MM (32.7 X 20.5 X 18.0 INCHES) -OUTPUT:1000 PCS/HOUR -NUMBER OF OPERATOR:1 PERSON/PER DEVICE -VOLTAGE:110V -BLEED PRESSURE: 0.7~0.8MPA -WEIGHT: ~95KG.

LFA MACHINES TDP 5 TABLET PRESS. MODEL TDP 5. VERSATILE AND RELIABLE. PRODUCES PHARMACEUTICAL-GRADE TABLETS. SPECS & FEATURES: -4,800 TABLETS PER HOUR -NUMBER OF DIES: 1 -MAX PRESSURE (KN): 50 -MAX DIAMETER OF TABLET: 20 MM / 0.79 IN -MAX FILL DEPTH: 18 MM / 0.71 IN -MAX THICKNESS OF TABLET: 8 MM / 0.315 IN -MAX PRODUCTION CAPACITY PER HOUR: 4,800 -NUMBER OF FILLING STATIONS: 1 -POWER USA110 V, 1 PHASE, 0.75 KW, 60 HZ

LEE INDUSTRIES 250 LDBT PRESSURE MIX TANK. 250 LITER, 316L STAINLESS STEEL, VERTICAL. APPROXIMATE 30" DIAMETER X 19" STRAIGHT SIDE, DISHED TOP AND BOTTOM. SPECS & FEATURES: -INTERNAL RATED 35 PSI AT -20 TO 275 DEGREES F, VACUUM INTERNAL. -TOP ENTERING 3-BLADE TURBINE AGITATOR, REQUIRES MOTOR/DRIVE. -OPENINGS TOP: 14" WITH COVER, (1) 3", (6) 1-1/2". 1-1/2" CENTER BOTTOM OUTLET, APPROXIMATE 6-1/2" DISCHARGE HEIGHT W/O VALVE, 2-1/8" WITH VALVE. -MOUNT ON (4) LEGS WITH CASTERS. NATIONAL BOARD# 5087, S/N: B6058A9

LEE INDUSTRIES 250 LDBT PRESSURE MIX TANK, 250 LITER, 316L STAINLESS STEEL, VERTICAL. S/N: B3834A9 SPECS & FEATURES: -APPROXIMATE 30" DIAMETER X 19" STRAIGHT SIDE, DISHED TOP AND BOTTOM. -INTERNAL RATED 35 PSI AT 275 DEGREES F, VACUUM INTERNAL. -TOP ENTERING 3-BLADE TURBINE AGITATOR, REQUIRES MOTOR/DRIVE. -OPENINGS TOP: 14" WITH COVER, (1) 3", (6) 1-1/2". 1-1/2" CENTER BOTTOM OUTLET, APPROXIMATE 6-1/2" DISCHARGE HEIGHT W/O VALVE, -2-1/8" WITH VALVE. MOUNT ON (4) LEGS WITH CASTERS. -NATIONAL BOARD# 4382

LEE INDUSTRIES 200 LDBT PRESSURE MIX TANK, 200 LITER, 316L STAINLESS STEEL, VERTICAL. SPECS & FEATURES: -APPROXIMATE 26" DIAMETER X 24" STRAIGHT SIDE, DISHED TOP AND BOTTOM. -INTERNAL RATED 30 PSI AT -20 TO 300 DEGREES F, VACUUM INTERNAL. -TOP ENTERING DUAL 3-BLADE TURBINE AGITATOR, REQUIRES MOTOR/DRIVE. -OPENINGS TOP: 10" WITH COVER, (1) 3", (6) 1-1/2". 1-1/2" CENTER BOTTOM OUTLET, APPROXIMATE 5-1/2" DISCHARGE HEIGHT. -MOUNTED ON (4) LEGS WITH CASTERS. -NATIONAL BOARD# 8561, S/N: 17569-1-12

USED-LOT OF (2) PNUEMATIC SCREW CAPPING MACHINES ADJUSTABLE CARTRIDGE SIZE/TORQUE. 3K CARTRIDGES/RUN

SONDEX/DANFOSS PLATE & FRAME HEAT EXCHANGER. STAINLESS STEEL. 289.3 SQFT HEAT TRANSFER AREA. SPECS & FEATURES: -(115) 304 STAINLESS STEEL 0.0197" THICK PLATES, APPROXIMATE 14" X 32". -MAXIMUM WORKING PRESSURE 100 PSI. -MAXIMUM DESIGN TEMPERATURE 210 DEGREES F. -OPENINGS FRONT: (4) 4", BACK: (2) 4", (2) 3". ASME STAMPED. -MOUNTED ON A EXPANDABLE FRAME.

CRCFILTERS EDH-25 ETHANOL DEHYDRATION SYSTEM. 25LB CAPACITY, 55 GAL COLLECTION DRUM. USED/FACTORY REFURBISHED CRCFILTERS.COM EDH-25 ETHANOL DEHYDRATION SYSTEM FOR WATER REMOVAL FROM ALCOHOL. THE CRCFILTERS.COM EDH-25 IS A HIGH EFFICIENCY ETHANOL DEHYDRATION SYSTEM FOR USE WITH 3A MOLECULAR SIEVE. UP-FLOW DESIGN ALLOWS FOR LONGER RESIDENCY TIMES ASSURING COMPLETE WATER REMEDIATION FROM YOUR ALCOHOL. NO MOVING PARTS OR ADDITIONAL COMPONENTS REQUIRED FOR OPERATION. THE 3A MOLECULAR SIEVE PROCESS OUT PERFORMS DISTILLATION AT A FRACTION OF THE COST. ALL STAINLESS STEEL CONSTRUCTION AND COMES WITH 25LB MEDIA COLUMN AND 55 GALLON COLLECTION CAPACITY. KEY FEATURES: 1. NO ELECTRICAL REQUIRED 2. 25LB MEDIA CAPACITY 3. EXPANDABLE 55 GAL VENTED COLLECTION DRUM 4. NO PUMPS REQUIRED WHEN GRAVITY FED 5. HIGH EFFICIENCY WATER REMEDIATION 6. OUT PERFORMS DISTILLATION ASSEMBLY REQUIRED: ALL CONNECTIONS MADE WITH QUICK CONNECTS NO TOOLS REQUIRED

USED PINNACLE STAINLESS CHROMATOGRAPHY/FILTRATION SYSTEM. SPECS & FEATURES: -CONSISTS OF (2) CUSTOM FABRIACTED COLUMNS. -COMES WITH ALL CLAMPS, GASKETS, ETC TO DO CHROMATOGRAPHY PROCESS. -SEE PICTURED PARTS FOR FULL INVENTORY. -INCLUDES 3 BATCHES OF MEDIA FOR THE CHROMOTGRAPHY PROCESS.

MARCHISIO 1000 LITER (APPROX 264 GAL) 304 STAINLESS STEEL TANK W/ AGITATOR & STAND. SPECS & FEATURES: -1000 L (APPROX 264 GAL) CAPACITY -FLOATING LID ALLOWS FOR VARIABLE SIZE BATCHES -304 STAINLESS STEEL CONSTRUCTION -PRODUCT DIMENSIONS: 20 X 24 IN. (W X H) PRODUCT THICKNESS: 20 X 22 GAUGE (BOTTOM X SIDE - 1.0 X 0.7MM) LOT INCLUDES: -MAIN VESSEL -AGITATOR POWERED BY 1 HP MOTOR -STAINLESS STEEL SUPPORT STAND

KANNAMILL POWERED BY SCHUTTE BUFFALO KANNAMILL 4 SPECS & FEATURES: -CONSTRUCTED OF 304 GRADE STAINLESS STEEL. -BUILT TO FACILITATE EASE OF MAINTENANCE AND CLEANLINESS IN THE EXTRACTION PROCESS, AS WELL AS IN PROCESSED MATERIAL FOR PRE-ROLLS INCLUDES: -MILL -INFEED CHUTE -DISCHARGE CHUTE WITH PRODUCT COLLECTION AND DUST COLLECTION AND VFD. -WIRED TO RUN ON SINGLE PHASE 110V OR 220V.

CENTURION HP3 BUCKER W/ STAND. SPECS & FEATURES: -BUCKS 100 LBS PER HOUR, DRY. BUCKS 500 LBS PER HOUR, WET. INDUSTRY HIGHEST BUCK RATE PER HOUR. -5 FEED ENTRY SIZES: 5-HOLE (3/16" , 1/4" , 3/8" , 1/2" , 3/4"). -TAKES STEMS UP TO 3/4 INCH IN DIAMETER. MADE OF STAINLESS STEEL AND ANODIZED ALUMINUM. -HIGH-QUALITY COMPONENTS AND FEW MOVING PARTS. LOT INCLUDES: -INCLUDES (3) 0.75 HP GEAR DRIVEN MOTORS WITH A VARIABLE SPEED CONTROLLER. -110 VOLT, 20 AMP CIRCUIT. -ROLLER SETS ARE MADE OF NEOPRENE RUBBER. GM, UL, CE, ROHS COMPLIANT.

CAPNA SYSTEMS ARES EXTRACTION SYSTEM. MODEL ARES. REDUCES AT 100 L/HR AT 95%-99% EFFICIENCY. DESIGNED FOR LARGER SCALE PRODUCTION. SPECS & FEATURES: -SOLVENT EFFICIENCY OF 95%-99%. -CAPABLE OF REDUCING 100L PER HOUR. -SOLVENT PREVIOUSLY USED: 200 PROOF ORGANIC GRAIN ETHANOL. -FULLY WINTERIZED AND SEMI-AUTOMATED. -CAN BE WATER-COOLED OR COOLED VIA CHILLER INLET. -INCLUDES WITH 35 GALLON COLLECTION TANK

MUNCH MACHINES MOTHER BUCKER BUCKING MACHINE. DESIGNED THE MACHINE TO RUN CONTINUOUSLY WITH MINIMAL MAINTENANCE. FROM INDOOR TO OUTDOOR GROWS. SPECS & FEATURES: -BUCKS 150-250 POUNDS PER HOUR, WET. 2560 POUNDS PER HOUR, DRY DEPENDING ON YOUR MATERIAL. -HOLE DIAMETER RANGE: 3/16" 3/4". -POWERED BY 1/2HP MOTOR. POWER REQUIREMENTS: 110V / 15A. CURRENT DRAW: +/- 3A. GENERATOR COMPATIBLE. CONNECTOR PLUG: NEMA 5-15P. CONTROL BOX RATINGS: NEMA 4/12/13. -WIDE SPEED RANGE CAN BE ADJUSTED TO WORK PERFECTLY WITH THE CONDITION OF YOUR PLANTS. TURN THE SPEED UP AND WITNESS THE POWER AND GRIP OF THE MOTHER BUCKER. TURN THE SPEED DOWN AND SEE HOW WELL THE MACHINE MINIMIZES TRICHOME LOSS. -BUCKER COMES WITH A SET OF UNUSED OUTDOOR WHEELS AND ALSO HAS AN EXTRA FACEPLATE

DELTA SEPARATIONS CUP 15 GEN 1.2 ETHANOL EXTRACTOR. SPECS & FEATURES: -APPROXIMATE 300 POUNDS PER 8 HOUR SHIFT. -UPGRADED WITH CUP 15 REBUILD KIT (ALL SEALS, BEARINGS, SEAL SPACERS, SEAL RETAINERS, AND DOUBLE STACK REFURBISHED) -DESIGNED TO TARGET BOTANICAL COMPOUNDS FROM PLANT SPECIES BY COMBINING CLOSED-LOOP ALCOHOL EXTRACTION WITH MECHANICAL CENTRIFUGATION AND CONTROLLING SOLVENT RESIDENCE TIMES, RPM CONTROL, AGITATION FORCE AND TEMPERATURE. -RATED FOR MAXIMUM SPEED OF 1200 RPM, 50 RPM MINIMUM, 60 DEGREE C (140 DEGREE F), -40 DEGREE C (-104 DEGREE F), -BASKET CAPACITY OF 8 TO 12 POUNDS. INCLUDES CONTROL PANEL.

DELTA SEPARATIONS CUP-15 ETHANOL ALCOHOL EXTRACTION SYSTEM, CAPACITY: 8-14 LBS PER BATCH - SPECS & FEATURES: -PRODUCTION CAPACITY: 8-14 POUNDS OF PLANT MATERIAL PER BATCH (DEPENDING ON MILL SIZE) -AVERAGE RUN TIME IS 10-20 MINUTES (DEPENDING ON SOP) -APPROXIMATE 300 POUNS (135 KILOGRAMS) -PROCESSING PER 8 HOUR SHIFT -ALCOHOL REQUIREMENT IS 12-13 GALLONS (45-49 LITERS) PER RUN. -MAIN PANEL CONTROL PANEL ALL WETTED PARTS ARE 304 AND 316L SANITARY STAINLESS STEEL. -INCLUDES:(6) KEGS (7) MESH BAGS, EXTRA GASKETD AND OTHER PICTURED SPARE PARTS.

SELLERS TP-20-S GAS-FIRED BOILER SPECS & FEATURES: -STYLE: TWO-PASS FOR SMALL FOOTPRINT APPLICATIONS -BURNER: SELLERS MULTI FLAME -SIZE: 20 HP -MAX DESIGN PRESSURE: 150 PSI -INPUT: 837,000 BTU/HR OUTPUT: 670,0000 BTU/HR -BURNER OPERATION: ON/OFF W/ PILOT HOLD -EMISSION RATING: 30 & 20 PPM NOX -CERTIFICATIONS: ASME -FUELS: NATURAL GAS (FUEL SUPPLY PRESSURE OF 5 PSI) -STEAM (15-150 PSI) & HOT WATER -COLD START TO STEAM IN UNDER 20 MINUTES -INTEGRATED UL BURNER / BOILER ELECTRICAL: 120 VOLT/ 60 HZ/ SINGLE PHASE / 36 AMPS LOT INCLUDES: -MAIN BOILER APPARATUS -FEED WATER TANK -SOFT WATER SYSTEM -BLOW DOWN TANK -WATER SOFTNER

YORK / CATERPILLAR PY-525A CONTAINERIZED PACKAGED MOBILE CHILLER. CONSISTING OF YORK MILLENNIUM ROTARY SCREW LIQUID CHILLER, MODEL YSECEAS4-CRDS. SPECS & FEATURES -RATED 533 TONS. REFRIGERANT R-22, CHARGE 1300 LBS. 408 HP, 3/60/460 VOLT, 3600 RPM MOTOR. -EVAPORATOR (182) TUBES RATED 150 PSI AT 110 DEGREES F, 2 PASS, 1200 GALLONS PER MINUTE. -CONDENSER (221) TUBES RATED 150 PSI AT 110 DEGREES F, 2 PASS, 1500 GALLONS PER MINUTE. -ENTERING CHILLED WATER 55 DEGREES F, LEAVING CHILLED WATER 45 DEGREES F. ENTERING CONDENSER WATER 85 DEGREES F, LEAVING CONDENSER WATER 94.9 DEGREES F. -INCLUDES (2) BALL & GOSSETT 50HP PUMPS, SOLID STATE MOTOR STARTER. -HAS (2) SIDE ROLL UP DOORS, (1) SERVICE DOOR. -MOUNTED INSIDE A 30' CONTAINER ON CHASSIS. SERIAL # SNGM-318990.

YORK / CATERPILLAR PY-525A CONTAINERIZED PACKAGED MOBILE CHILLER. CONSISTING OF YORK MILLENNIUM ROTARY SCREW LIQUID CHILLER, MODEL YSECEAS4-CRDS. SPECS & FEATURES: -RATED 533 TONS. -REFRIGERANT R-22, CHARGE 1300 LBS. 408 HP, 3/60/460 VOLT, 3600 RPM MOTOR. -EVAPORATOR (182) TUBES RATED 150 PSI AT 110 DEGREES F, 2 PASS, 1200 GALLONS PER MINUTE. -CONDENSER (221) TUBES RATED 150 PSI AT 110 DEGREES F, 2 PASS, 1500 GALLONS PER MINUTE. -ENTERING CHILLED WATER 55 DEGREES F, LEAVING CHILLED WATER 45 DEGREES F. -ENTERING CONDENSER WATER 85 DEGREES F, LEAVING CONDENSER WATER 94.9 DEGREES F. -MOUNTED INSIDE A 20' CONTAINER ON CHASSIS -SERIAL # SKGM-172530

LOT OF (5) STAINLESS STEEL WINTERIZATION FILTRATION SYSTEMS, WITH BALL VALVE AND RING TO HOLD FILTER PAPER

MARCHISIO 1000 LITER (APPROX 264 GAL) 304 STAINLESS STEEL TANK SPECS & FEATURES: -1000 L (APPROX 264 GAL) CAPACITY -OPEN TOP -304 STAINLESS STEEL CONSTRUCTION -PRODUCT DIMENSIONS: 20 X 24 IN. (W X H) PRODUCT THICKNESS: 20 X 22 GAUGE (BOTTOM X SIDE - 1.0 X 0.7MM) LOT INCLUDES: -MAIN VESSEL

MARCH SCIENTIFIC FFE DUAL FALLING FILM EVAPORATOR SET UP. SYSTEM INCLUDES: UNUSED-MARCH SCIENTIFIC FALLING FILM EVAPORATOR SET UP. SYSTEM. (1) UNUSED MARCH SCIENTIFIC FFE DUAL -(1) UNUSED-TAEEVO TECH-101 INDUSTRIAL PROCESS WATER CHILLER. COOLING CAPACITY. 9.8 TON. BTU/HR: 117,600. RESERVOIR CAPACITY: 70 GALLONS, -(1) 210 GALLON JACKETED RECOVERY TANK- -(2) HIGH CFM CHEMICAL DUTY VACUUM PUMP -(1) STAINLESS SANITARY PUMP- (2) CRUDE RECOVERY TANKS

HEIDOLPH HEIVAP INDUSTRIAL ROTARY EVAPORATOR. SPECS & FEATURES: -HEATING CAPACITY 4,000 W. -TEMPERATURE RANGE HEATING BATH 20 180 C. BATH TEMPERATURE SETTING DIGITAL. -MATERIAL HEATING BATH STAINLESS STEEL V4A.CAN ACHIEVE TEMPERATURES OF UP TO 180 DEGREES C AND ACCEPT EITHER WATER OR BATH FLUIDS. NON-FOGGING SAFETY GLASS AND METAL FRAME GUARD HOOD. -DIAMETER HEATING BATH 400 MM. VOLUME HEATING BATH 18 L (H2O) / 14 L (OIL). -CAN ACHIEVE TEMPERATURES OF UP TO 180 DEGREES C AND ACCEPT EITHER WATER OR BATH FLUIDS. NON-FOGGING SAFETY GLASS AND METAL FRAME GUARD HOOD. -ROTARY EVAPORATOR HAS 20 L EVAPORATING FLASK AND (2) 10L RECEIVING FLASKS. -HEIGHT ADJUSTMENT SPEED 45 MM/S.HEIGHT ADJUSTMENT 180 MM. -POWERED BY DRIVE EC-MOTOR. LOT INCLUDES: -INCLUDES HEI-VAP INDUSTRIAL DISTIMATIC AUTOMATIC MODULE INCLUDING RESIDUE EXTRACTION -GLASS SET R -VACUUM PUMP INCLUDED. -NO CHILLER INCLUDED.

ZHENGZHOU MACHINERY CO. LTD. TZB-1 HEMP STACK DECORTICATOR SPECS & FEATURES: -MACHINE CAN HANDLE ALL KINDS OF HEMP: CANNABIS, JUTE, KENAF, HEMP, HEMP, RAMIE, LINEN, APOCYNUM,MULBERRY BRANCHES, EUCALYPTUS BRANCHES, ETC. -GASOLINE ENGINE 18 HP 8.5KW -NUMBER OF REVOLUTIONS: 1000-1200 REV / MIN -PRODUCTIVITY: 0.15 MU - 0.25 MU / HOUR -NUMBER OF OPERATORS NEEDED: 1 PERSON