Monthly MultiFacility CNC Fab No Reserve Auction

BLANCHARD 22A 42 ROTARY SURFACE GRINDER GRINDING WHEEL DIAMETER 22" MAGNETIC CHUCK DIAMETER 42" MAX. WEIGHT CAPACITY 3,000 LBS. MAX. SWING 48" STANDARD GRINDING HORSEPOWER 50 HP VERTICAL RANGE 24" OPTIONAL VERTICAL RANGE 36" DRIVE SYSTEM SERVO FEED RATE .0001" - .010" IPM GRINDING SPINDLE SPEED 720 RPM CHUCK ROTATION SPEEDS 6-24 RPM INFINITELY VARIABLE DONALDSON TORIT DUST COLLECTOR RANGE: 48" DIAMETER X 11" HIGH OVER 42" CHUCK WORK TABLE: 42" ONE-PIECE STEEL MAGNETIC CHUCK WITH 5/8" POLE SPACING. CHUCK HAS 2" CENTER HOLE. WHEEL: 22" CORTLAND SEGMENT CHUCK POWER FEED VARIABLE FROM 0.004" TO 0.065" PER MINUTE APPROXIMATE NET WEIGHT 30,000 LBS.

BLISS C-60 O.B.I PUNCH PRESS BLISS C-60 MECHANICAL PRESS W/ BED SIZE 32L X 21 W, RAM AREA 17L X 11 TONNAGE: 60 TON STROKE: 4" SHUT HEIGHT ON BED: 14 1/4" RELAY LOGIC CONTROL TYPE OF CLUTCH: PNEUMATIC OPERATED THE PRESS SHUT HEIGHT IS: 13 BED SIZE: 32 L X 21 W RAM AREA : 17 L X 11 ADJUSTMENT : 3 SPEEDS (HYDRAULIC HAS MULTIPLE SPEEDS): 1 SPEED TYPE OF CONTROLS: RELAY LOGIC SITTING ON CONCRETE SLAB PLC OR CNC: RELAY LOGIC BED CUSHION: NO CUSHION BOLSTER PLATE: YES THICKNESS OF THE BOLSTER PLATE: 32 L X 21 W X 3 T"

2011 ENSHU EV360T VERTICAL MACHINING CENTER W/ 5TH AXIS TRUNNION X AXIS TRAVEL: 23.6" Y AXIS TRAVEL: 14.1" Z AXIS TRAVEL: 11.8" TABLE SIZE: 25.5"X 13.7" MAX TABLE LOAD: 250 KG SPINDLE MOTOR: AC 5.5KW (15 MIN RATED) 3KW (CONTINUOUS) SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: MAS BT30 TOOL CHANGER: 24 ATC RAPID RATE X AXIS: 1968.5"/MIN RAPID RATE Y AXIS:1968.5"/MIN RAPID RATE Z AXIS: 2362.2"/MIN CONTROL: FANUC 0I-MD CUTTING TIME: 9,723 HOURS MATERIALS CUT: ALUMINUM CASTINGS EQUIPPED WITH: 5-AXIS NIKKEN TRUNNION WEIGHT: 2300KG

2002 DECKEL MAHO DMC 125U 5 AXIS MACHINING CENTER (2002) X 49" Y 34" Z 31" # AXIS 5 SPINDLE SPEED 18,000 RPM- HSK 63 SPINDLE HOURS 6500 HOURS (AS OF MAY 2022) HIGH PRESSURE PUMP (80 BARS) FOR COOLANT THRU SPINDLE OPERATING HOURS 48583 HOURS (AS MAY 2022) TOOL MAGAZINE CAPACITY : 180 CONTROL CNC (HEIDENHAIN MILL-PLUS IT) EQUIPPED WITH: 7 PALLETS RENISHAW PROBE 180 TOOL CHAIN HSK63 DIMENSIONS: 325" X 386" X 114" WEIGHT: 90,000 LB

2011 ENSHU EV360T VERTICAL MACHINING CENTER W/ TWIN TABLE ROTARY INDEXER X AXIS TRAVEL: 23.6" Y AXIS TRAVEL: 14.1" Z AXIS TRAVEL: 11.8" TABLE SIZE: 25.5"X 13.7" MAX TABLE LOAD: 250 KG SPINDLE MOTOR: AC 5.5KW (15 MIN RATED) 3KW (CONTINUOUS) SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: MAS BT30 TOOL CHANGER: 24 ATC RAPID RATE X AXIS: 1968.5"/MIN RAPID RATE Y AXIS:1968.5"/MIN RAPID RATE Z AXIS: 2362.2"/MIN CONTROL: FANUC 0I-MD CUTTING TIME: 9,723 HOURS MATERIALS CUT: ALUMINUM CASTINGS EQUIPPED WITH: TWIN TABLE ROTARY INDEXER WEIGHT: 2300KG

DOALL GPM-200V VERTICAL MILLING MACHINE TABLE AREA (T SLOTTED) - 42" X 9" LONGITUDINAL TABLE TRAVEL - 30" CROSS FEED TRAVEL - 12" VERTICAL TABLE TRAVEL - 16" QUILL TRAVEL - 5" RAM TRAVEL- 12" SPINDLE SPEEDS - 60 TO 4200 RPM SPINDLE FEEDS - .0017 - .00032 - .0053 IPR QUILL DIAMETER - 3-3/8" SPINDLE TAPER - R-8 FORWARD & REVERSE - YES 1 SHOT LUBE - YES DRAW BAR - POWER MOTOR - 2 HP EQUIPPED WITH: FAGOR DRO FAGOR CONTROL

EDM SOLUTIONS INC APOLLO CNC SINKER EDM 70INCH X 44INCH X 26INCH INNER CAPACITY, SYSTEM 3R TOOLING, HEIDENHAIN TNC 406 CONTROLS, EQUIPPED WITH: EROWA 3R CHUCK

2005 OCEAN INDUSTRIES MDL-1000/1B CNC SINGLE SPINDLE BEAM DRILL LINE FOR FABRICATING BOTH STRUCTURAL STEEL AND MISCELLANEOUS METALS, LAYS OUT AND DRILLS ALL YOUR HOLES IN ANY STEEL PROFILE, BUILT IN 2005 MAX. DRILL DIAMETER: 1-9/16 MAX PROFILE HEIGHT: 39 MAX BEAM LENGTH: 480 MAX SPEED (X-AXIS):1417 IPM MAX SPEED (Y-AXIS):1417 IPM MAXIMUM THICKNESS: 6 SPINDLE SPEEDS: 200 850 RPM SPINDLE MOTOR POWER: 13.5 HP DRILLING FEED RATE: 2 10 IPM DRILL SPINDLE RAPID:192 IPM MAXIMUM SPINDLE STROKE:13 PROCESSES ALL STEEL PROFILES INCLUDING CHANNEL, ANGLE, FLAT BAR, BASE PLATES, RHS, SQUARE, AND ROUND PROFILES EQUIPPED WITH: 60FT. OF BEAM LINE BED

RICHARDS MULTIFORM BENDER BENDING CAPACITY 5/16" X 4" MILD STEEL 7/16" X 4" MILD STEEL* 9/16" X 2" MILD STEEL* 15/16" SQ. MILD STEEL 1/2" X 4" COPPER & ALUMINUM 1/4" X 4" CAPACITY EQUIPPED WITH: VERSATILE VARIABLE SPEED RAM BENDER , ADJUSTABLE RAM STOP FOR ACCURATE REPEATABLE BENDS, BEND HUNDREDS OF SHAPES WITH MULTIPLE TOOLS, APPROX DIMENSIONS: 4FT X 3FT X 3.5"

TAURING ALFA40H1 ANGLE BENDING ROLL DRIVING ROLLS: 3 SHAFT SPEED: 7.7-15.6 LEG IN ANGLE CAPACITY: 2" X 2" X 3/16" LEG OUT ANGLE CAPACITY: 2 3/8" X 2 3/8" X 3/16" SQUARE BAR CAPACITY: 1 1/4" X 1 1/4" ROUND BAR CAPACITY: 1 3/8" APPROX. DIMENSIONS: 25" X 38" X 42"

2010 TAKAMAZ XD-8 PLUS TWIN SPINDLE TWIN TURRET CNC LATHE X-AXIS STROKE 7.87" Z-AXIS STROKE 14.9" SPINDLE SPEED MAX 4500 RPM RAPID X-AXIS 18M/MIN RAPID Z-AXIS 24M/MIN SPINDLE MOTOR AC 3.7/2.2 X 2 FEED MOTOR X & Z 1.0 EQUIPPED WITH: FANUC OI-TC CNC CONTROL, MD50 LOADER WITH .5 KG CAPACITY, (2) COLLET CHUCKS, REMOTE PENDANT; CHIP AUGER, 3/50/60/200V, 20 KVA

SCISSOR LIFT 20FT CAPACITY

2001 STEELMASTER PRIMA W209 RB BELT GRINDERABRASIVE BELT WIDTH: 38" WORKPIECE THICKNESS: APPROX. 4.75" ABRASIVE BELT LENGTH: 74" BELT DRIVE MOTOR: 11KW CONVEYOR SPEED VARIABLE: 8.82 FT./MIN TO 42 FT./MIN ABRASIVE BRUSH SPEED: 59 FT./S

2005 MURATA MD60 CNC TURNING CENTER 6" CHUCK X-AXIS 24M/MIN Z-AXIS 24M/MIN TOOL CAPACITY 10 TOOLS SPINDLE SPEED 4500 RPM LIVE TOOL (MILLING & DRILLING) 4000 RPM JIS A2-5 SPINDLE NOSE MAX. LIVE TOOL DIA. 16MM FOR TAPPING M10 EQUIPPED WITH: SINGLE SPINDLE CNC CONTROL SINGLE GANTRY 3 AXIS LOADER GROSS WEIGHT W/ LOADER 2400KG'S

2005 MURATA MW120 CNC TURNING CENTER 6" CHUCKS TWIN SPINDLE X 24M/MIN Z 24M/MIN TOOLS 8 X 2 4500 RPM JIS A2-5 SPINDLE NOSE CNC CONTROL SINGLE GANTRY 3 AXIS LOADER GROSS WEIGHT W/ LOADER 4400KG'S EQUIPPED WITH: JIS A2-5 SPINDLE NOSE CNC CONTROL SINGLE GANTRY 3 AXIS LOADER GROSS WEIGHT W/ LOADER 4400KGS

2012 MURATA MD100 CNC TURNING CENTER MAX. CHUCK SIZE: 10" SPINDLE NOSE SIZE: A2-6 X-AXIS TRAVEL: 7.4" Z-AXIS TRAVEL: 6.6" SPINDLE MOTOR: 11KW SPINDLE SPEED: 2,000 RPM LIVE TOOL SPEED: 3,000 RPM MAX. LIVE TOOL DIAMETER: MILLING-16MM, TAPPING-M16 RAPID RATE X-AXIS: 18M/MIN RAPID RATE Z-AXIS: 15 M/MIN CONTROL: FANUC 31I-A CUTTING TIME: 18,827 HOURS LOADER WRKPX WGT: 8KG X 2 MATERIALS CUT: ALUMINUM CASTINGS EQUIPPED WITH: 8" CHUCK, CHIP CONVEYOR, 3 AXIS GANTRY ROBOT LOADER, TURNING / MILLING / DRILLING CAPABILITIES IN EVERY TURRET POSITION, FANUC 31I-A CONTROL, M/Z WEIGHT: 4000 KG

2005 THERMWOOD C40-472 CNC ROUTER CS45 4FT X 8FT X 15" - 10HP - 24000 RPM TABLE SIZE: 4FT X 8FT Z AXIS: 15" HP OF ROUTERHEAD: 10 HP HSD SPINDLE RPM OF ROUTERHEAD: 24,000 RPM X, Y, Z SPEEDS: 1000 IPM (INCHES PER MINUTE) SOFTWARE: V6 EQUIPPED WITH: VACUUM TABLE 4 TOOL CHANGER ON BACK BAR THERMWOOD 9100 CONTROL

2007 MULTICAM 6000 PLASMA CUTTING TABLE, EFFECTIVE CUTTING WIDTH: 8', CUTTING CAPACITY: 1.5" MILD STEEL; 1" STAINLESS STEEL; 1" ALUMINUM, BUILT IN 2007 EFFECTIVE CUTTING WIDTH: 8FT Y-AXIS TRAVEL: 8FT Z-AXIS CLEARANCE: 9 Z-AXIS TRAVEL: 10 RESOLUTION: .0001 REPEATABILITY: +/- .001 RAPID TRAVERSE: 1,000 IPM DRIVE SYSTEM X AND Y AXIS: RACK AND PINION DRIVE SYSTEM Z AXIS: BALL SCREW CUTTING CAPACITY: 1.5 MILD STEEL / 1 STAINLESS STEEL / 1 ALUMINUM EQUIPPED WITH: MULTICAM CONTROLLER CONTROL LL EXTRA PARTS INCLUDING CONSUMABLES FOR THE MULTIPLE PLASMA TORCH HEADS 50AMP, 80AMP, 130AMP, 200AMP, 260AMP AN EXTRA AC SERVO DRIVE CONTROLLER CONTROLLER CABLES ACTUATORS X-AXIS MOTORS AND MORE

2003 OKUMA LF S15-2SP TWIN SPINDLE CNC LATHE WIDE 14FT HEIGHT 11FT TOP OF TOOL CARRIAGE DEEP 8-1/2FT WITHOUT COOLANT TANK DEEP 12FT WITH COOLANT TANK/CHIP CONVEYOR ATTACHED SPINDLE 2 CHUCK SIZE 8 AXIS 2 POWER 15 HP MAX RPM 4500 RPM TURNING DIA. 19 SWING 20 MACHINING LENGTH 6.3 TAIL STOCK 0 EQUIPPED WITH: OSP U100L CNC CONTROL GANTRY AUTO LOADING/UNLOADING MISC TOOL HOLDERS AND TOOLING COOLANT TANK CHIP CONVEYOR WEIGHT 16979 LB.

FADAL VMC 5020A CNC VERTICAL MACHINING CENTER, X-AXIS TRAVELS: 50, Y-AXIS TRAVELS: 20, Z-AXIS TRAVELS: 20 TABLE CAPACITY: 4,120 LBS, X-AXIS TRAVELS: 50 Y-AXIS TRAVELS: 20 Z-AXIS TRAVELS: 20 TABLE SIZE: 56.5 X 20 TABLE CAPACITY: 4,120 LBS RAPID TRAVERSE (X/Y): 900 IPM SPINDLE SPEED: 7,500 RPM SPINDLE TAPER: CAT40 ATC, NUMBER OF TOOLS: 30 SPINDLE DRIVE MOTOR: 22.5 HP SPINDLE TORQUE: 220 FT/LBS CONTROL: FADAL 88HS (FADAL MP AVAILABLE) DIMENSIONS: 115 X 84 X 109 WEIGHT: 10,500 LBS

WELDING TECHNOLOGY CORP 5043 SPOT WELDER CUST DWG DW-012238 CONTROL PWR (120V AC 80HZ 500VA) INTERRUPTING CAPACITY 85KA MAX CONTINUOUS POWER AT 60HZ FOR 480V AC IS 3PH 72KVA EQUIPPED WITH: MEDWELD 5000S CONTROL