Day 1 Greenwood Forest Products 1983 Ltd 2 Day Online Auction

Tradewest Asset Solutions Inc.

Category: DUST COLLECTION EQUIPMENT

Total Lots: 401

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 401 lots

Year	Make	Model	Lot Description	Hammer Price
	AIRE CURE	376AC10	AIRE CURE 376AC10 REVERSE AIR BAGHOUSE SYSTEM, 52,800 CFM, 376 BAGS, 10' LENGTH, REVERSE PULSE CLEANING, W/ ALLIED ROTARY AIRLOCK AIRE CURE · 376AC10	🔒 Subscribe
	JOULIN	1038-02 N1200	JOULIN 1038-02 N1200 VACUUM STACKING SYSTEM, 8' X 5" 8000LB SCISSORLIFT W/ (8) POWERED CHAINS, HYDRAULIC POWER UNIT, OVERHEAD TRACK SYSTEM , JOULIN PLC, CONTROLS, 7'3" X 54" 5 STRAND TRACKED 90 DEGREE TRANSFER TO W/ (2) 1HP, 230/460V DRIVES JOULIN · 1038-02 N1200	🔒 Subscribe
	MANN-RUSSELL	10' CONTINUOUS CROSS-FLOW LUMBER EDGE GLUER	MANN-RUSSELL 10' CONTINUOUS CROSS-FLOW LUMBER EDGE GLUER; RADIO FREQUENCY (RF) PRESS, 10' LINE, 480V, 103KVA; S/N S0061AUTOMATED INFEED SECTION: 9'6" X 87" 8 STRAND, R450 CHAIN, USED FOR EDGE GLUING 20MM X 36MM LAMELS INTO A CHARGE UP TO 1220MMW AHEAD OF THE PRESS; 12 RO 1-1/2 STOCK THICKNESS; SPEED RANGE 2-12 FPM; OPEL-P- PRODUCTS HYDRA CEL 1HP HYDRAULIC PUMP, GRACO 1050 PUMP, AUTO LOAD CONTROL TO 6.7 MHZ; SOLID STATE 3PH FULL WAVE BRIDGE RECTIFIER; SOLID STATE OVERLOAD PANEL; MANN-RUSSELL OSCILLATOR CIRCUIT, W/ TWIN VACUUM POWER TRIODES, OPERATING PUSH-PULL; MANN-RUSSELL 1750C RADIO FREQUENCY GENERATOR, W/ INFEED TRANSFORMERS; HIGH SPEED TRAVELING CUT-OFF SAW, 18 SAW BLADE 48 TOOTH STRAIGHT CARBIDE; MANN-RUSSELL · 10' CONTINUOUS CROSS-FLOW LUMBER EDGE GLUER	🔒 Subscribe
	ANTHON	CD6 WWS 130	ANTHON CD6 WWS 130 PANEL CALLIBRATION/SANDING MACHINE; S/N: 99.2.-19; 6 HEAD; (4) 100HP MOTORS, (2) 50HP MOTORS; SANDING WIDTH: 1300MM; MIN/MAX HEIGHT: 155MM; FEED SPEED: 5-30M/MINUTE; WEIGHT 19.720 KG; 480V ANTHON · CD6 WWS 130	🔒 Subscribe
			CABINET OF BAGHOUSE BLOWER CONTROLS, DISCONNECTS	🔒 Subscribe
			4 STRAND INFEED PACKAGE BREAKDOWN DECK, 13' X 22.5'L; TO 4 ARM 12'6" HYDRAULIC TILT HOIST, 51" ARMS, 50" HEIGHT, 10HP HPU	🔒 Subscribe
2000	CHALLENGER	CG1000-5075-S-D-T	2000 CHALLENGER CG1000-5075-S-D-T WOOD WASTE YARD GRINDER S/N: 1100G0262; (2) 100HP (75KW) MOTORS; 480V 3PH; INLINE 9 X 14 SCREW AUGER; 11 ROLL GRIZZLY, W/ CONTROL PANEL, CUTLER HAMMER 200AMP DISCONNECT 2000 · CHALLENGER · CG1000-5075-S-D-T	🔒 Subscribe
2002	ANTHON	LNB/LNB-28	2002 ANTHON LNB/LNB-28 PANEL SIZER LINE: ANTHON LNB/LNB-28 MACHINE PRESSURE BEAM ACTS AS SUCTION DUCT FOR SAW CLAMPS.5/13.5 CNC PANEL SIZER FOR AUTO RIP & CROSS CUTTING OF SOLID WOOD; LENGTH 2800MM X WIDTH 1220MM; RAW BOARD MIN: 900 X 800MM; THICKNESS 12-38MM; RIPPING LENGTH: 2850MM; CROSS CUTTING LENGTH: 1350; MIN. FINISHED PART: 415 X 143MM; COMPRISED OF: INSPECTION ROLLER TRACK W/ LIFTABLE FRAME, INSPECTION ROLLER TRACK W/ LIFTABLE FRAME, BOOK FORMING STATION W/ LIFTING TABLE, MAX STACK 800MM, ROLLER TRACK W/ FORKLIFT SLITS, INTERMEDIATE POWER ROLLER TRACK, ANGULAR SAW SYSTEM, INCLUDING: PREP TABLE FOR RIP CUT POSITIONING, GUIDE SYSTEM, RIP SAW LNB 28.5: STRAIGHT RIP OR USED FOR TRIMMING APPROX. 20MM; SAW CARRIAGE SPEED 60M/MIN., & 80M/MIN RETURN; CROSS TRANSFER SYSTEM W/ LIFTABLE ROLLER TRACK FOR SMALL STRIPS, PREP TABLE CROSS CUT SAW W/ POSITIONING FEEDER, CROSS CUT SAW LNB 13.5, SWITCHGEAR, MICRO PROCESSOR CONTROLS; DESTACKING: INTERMEDIATE ROLLER TRACK W/ TRIM CUT SLUICE, ANGULAR TRANSFER 2002 · ANTHON · LNB/LNB-28	🔒 Subscribe
			WAYCON 9' X 20' 5 STRAND TRIM TABLE, 13' TO 24' BOARDS; (2) OVERHEAD ADJUSTABLE TRIM SAWS, 10HP, 230/460V	🔒 Subscribe
2008	ARPAC	TS833CF	2008 ARPAC TS833CF SHRINK WRAP SYSTEM S/N: 10204; 18" X 18' INFEED BELT CONVEYOR W/ GEAR DRIVE, WRAP DISPENSERS & RACKS, POWER OUTFEED ROLLCASE, 16 X 9; 2008 ARPAC MPD1222120 12 HEAT TUNNEL; S/N 11064, POWER ROLLCASE, 12 X 10; AIR OPERATED PUSH OFF BAR TO DECLINE 4 RUN TIPPLE ROLL TRANSFER W/ BOTTOM STOP; C/W OUTFEED ROLLS VFD 2008 · ARPAC · TS833CF	🔒 Subscribe
	YASKASWA MOTOMAN	SP400X	YASKASWA MOTOMAN SP400X ROBOTIC PLACER W/ REMOTE CONTROL; ATTACHED TO (4) CONVEYORS, PALLET STATION & PAPER ROLL STORAGE; HORIZONTAL STROKE 3100MM, VERTICAL STROKE 2200 MM; GRIPPER ARM CAPACITY 400KG; GRIPPING TOOLS IS FORK & PNEUMATICK HOLD-DOWN CYLINDERS YASKASWA MOTOMAN · SP400X	🔒 Subscribe
	WESTINGHOUSE	8 SECTION MCC	WESTINGHOUSE 8 SECTION MCC, (41) SWITCHES WESTINGHOUSE · 8 SECTION MCC	🔒 Subscribe
	WAYCON MFG		WAYCON MFG TARPING STATION, 30', 198" CLEAR PLATFORM WAYCON MFG	🔒 Subscribe
	WADKIN	SUPER XJS220	WADKIN SUPER XJS220 9 HEAD HEAD MOULDER; 5" X 9" (130 X 230MM) CAPACITY; MIN SIZE FINISHED LUMBER: - WADKIN SUPER XJS220 9 HEAD HEAD MOULDER; 5 X 9 (130 X 230MM) CAPACITY; MIN SIZE FINISHED LUMBER: 15MM X 6MM THICK; 10 - 120M/MINUTE; JOINTED; 2 1/8" TOP/BOTTOM SPINDLE; 1 13/16" SIDE HEAD SPINDLE WADKIN · SUPER XJS220	🔒 Subscribe
	GARDNER DENVER	ELECTRA SCREW 100HP	GARDNER DENVER ELECTRA SCREW 100HP COMPRESSOR, 3,966 HOURS; 230/460V GARDNER DENVER · ELECTRA SCREW 100HP	🔒 Subscribe
2002	ARPAC	GREAT LAKES TS37 NE	2002 ARPAC GREAT LAKES TS37 NE SHRINK WRAP SYSTEM S/N: 4815; CONTINUOUS MOTION ADJUSTABLE SIDE SEAL WRAPPER W/ SHANKLIN T-72 FREE STANDING HEAT TUNNEL; 5 RUN LATERAL INFEED TRANSFER, RUBBER RUNS ON STEEL FRAME; 12 X 17 BELT INFEED CONVEYOR; BRAKED; (2) 12 X 10 POWER ROLLCASES; AIR OP. PUSHOFF BAR TO DECLINE TIPPLE ROLL WITH BOTTOM STOP; 460V; W/ VARIABLE FREQUENCY DRIVE 2002 · ARPAC · GREAT LAKES TS37 NE	🔒 Subscribe
	GRECON		GRECON DUST SYSTEM SPARK DETECTION CONTROLS W/ SENSOR DETECTOR SECTIONS OF BLOWER PIPE GRECON	🔒 Subscribe
			40 UNIT SHAVINGS BINS, CLAMSHELL DUMPS; 5HP HPU; W/ 5' & 4' CYCLONES, W/ TARPING STATION	🔒 Subscribe
	GROSS	GAZ-102	GROSS GAZ-102 WOOD WASTE GRINDER; 348MM ROTOR DIAMETER; 480V; C/W CONTROL PANEL GROSS · GAZ-102	🔒 Subscribe
	ULTIMIZER	14B-100 SERIES II	ULTIMIZER 14B-100 SERIES II OPTIMIZING CHOP LINE, CONTROLS, 16' INFEED TABLE, W/ OUTFEED BELT 9" X 24'8" W/ 3HP DRIVE ULTIMIZER · 14B-100 SERIES II	🔒 Subscribe
	SYSTEM TM/AS	4 STRAND UHMW LUGGED TRIM TABLE	SYSTEM TM/AS 4 STRAND UHMW LUGGED TRIM TABLE, 7' X 30', UNIFAB OVERHEAD ADJUSTABLE 2 SAW TRIMMER; LASER GUIDES, 76" X 7', 3 STRAND LANDING TABLE , 92" X 13' EVEN ENDING ROLLS, 76" X 7'6" 3 STRAND OUTFEED W/ 11" X 17' WASTE BELT W/ DRIVE SYSTEM TM/AS · 4 STRAND UHMW LUGGED TRIM TABLE	🔒 Subscribe
	SYSTEM	M231	SYSTEM M231 MOULDER INFEED W/ (2) HURRY UP ROLLS TO (2) HOLD DOWN BARS, 8" X 12'6" BELT CONVEYOR W/ FENCE SYSTEM · M231	🔒 Subscribe
	EURUS	MB6024	EURUS MB6024 ROTARY HIGH PRESSURE BLOWER; 50HP, 208-230/460V, RATED 2300ICFM @ 4 PSIG X 2238 RPM, W/ STARTER CONTROL PANEL EURUS · MB6024	🔒 Subscribe
			ALL TECK CABLE FROM MAIN PDC ROOMS TO MCC'S TO MACHINERY ( NO CUTTING WITHIN 6" OF EQUIPMENT MOTORS)	🔒 Subscribe
			LONG LENGTH CYCLONE, 13' DIAMETER, W/ STEEL FRAME & ALLIED FEEDER, 7.5HP, 208-230/460V MOTOR & RADICON 30/1 REDUCER	🔒 Subscribe
	BAUM	7.5HP HIGH PRESSER BLOWER	BAUM 7.5HP HIGH PRESSER BLOWER, 460V BAUM · 7.5HP HIGH PRESSER BLOWER	🔒 Subscribe
	ISCO	EL96-2	ISCO EL96-2 HIGH SPEED AUTO STACKER PLC & CONTROL; RIGHT ANGLE INFEED TRANSFER: 30 X 9L DROP ROLL ROLLCASE, W/ (7) 1 X 5 RUBBER, CROSS FEED BELTS TO STACKER; 5 X 8 SCISSOR LIFT, POWER ROLLCASE TOP; S/N: 00136 ISCO · EL96-2	🔒 Subscribe
			2 SAW TRIMMER W/ 96" X 12'4" 6 STRAND LUGGED THROUGHFEED, UHMW LINED, (4) EVEN ENDING ROLLS , WASTE BELT CONVEYOR, 12" X 11"	🔒 Subscribe
			RF PRESS OUTFEED ROLLCASE, 48" X 12'6", W/ MOTOR & REDUCER,W/ 15 STRAND RUBBER CROSS BELTS	🔒 Subscribe
			12' X 21' 3 STRAND PACKAGE INFEED TRANSFER, TO 54" X 25' PACKAGE ROLLCASE SQUEEZE W/ END BUMP AND GUILLOTINE GATE W/ HPU	🔒 Subscribe
			10' LONG LENGTH CYCLONE	🔒 Subscribe
	NELSON	600	NELSON 600 150HP BLOWER, 460V, W/ CUTLER HAMMER 400AMP DISCONNECT NELSON · 600	🔒 Subscribe
	WRIGHT	W-150 HD	WRIGHT W-150 HD B AUTO TOP & FACE CIRCLE SAW SHARPENER WRIGHT · W-150 HD	🔒 Subscribe
	FPE	MAIN PDC	FPE MAIN PDC, 1200 AMP; 277/480V FPE · MAIN PDC	🔒 Subscribe
			ELEVATED STEEL WALKWAY PLATFORM & FRAME, 180', (20 SETS OF STAIRS)	🔒 Subscribe
	INGERSOLL-RAND	100HP SCREW COMPRESSOR	INGERSOLL-RAND 100HP SCREW COMPRESSOR, 145 PSIG; 56,509 HOURS; 460V S/N: IRN100H-CC INGERSOLL-RAND · 100HP SCREW COMPRESSOR	🔒 Subscribe
	SIGNODE	COMPRESSION PACKAGE STRAPPER	SIGNODE COMPRESSION PACKAGE STRAPPER W/ SIGNODE 3 STEEL STRAPPING HEAD SIGNODE · COMPRESSION PACKAGE STRAPPER	🔒 Subscribe
	ANTHON	LB-2	ANTHON LB-2 LABEL PLACING UNIT COMPRISED OF: FRICTION FEEDER, MODEL LB-2; FEED WIDTH 250MM; TRANSPORT CONVEYOR, 2500MM LENGTH; 800MM BELT WIDTH; 834MM CONVEYOR WIDTH; VARIABLE SPEED TO APPROX 35M/MIN; DOUBLE SHEET CONTROL; COVER FOR FRICTION FEED UNIT; IONIZATION UNIT: CHARGING ELECTRODE 30 KV; GENERATOR; FORMAT SIZE: MAX 630 X 180MM; MIN 350 X 140MM; FORMAT SIZE: MAX 630 X 180MM; MIN 350 X 140MM; LONGITUDINAL FEED; 35 CYCLES/MIN.; SAMUEL SOA750-36 FULLY AUTOMATIC ORBITAL BANDER, S/N 750/36-10_ _ 051813; 110/240V 1PH, LABELLING SYSTEM; POWER OUTFEED ROLLCASE, 30 X 6L. ANTHON · LB-2	🔒 Subscribe
			24 UNIT SHAVINGS BIN, 10' DIAMETER LONG LENGTH CYCLONE	🔒 Subscribe
	WRIGHT	W-350 SUPER HD	WRIGHT W-350 SUPER HD DUAL SIDE GRINDER WRIGHT · W-350 SUPER HD	🔒 Subscribe
	ALLEN BRADLEY	4 SECTION MCC	ALLEN BRADLEY 4 SECTION MCC (130 SWITCHES, VARIABLE FRQUENCY DRIVE) ALLEN BRADLEY · 4 SECTION MCC	🔒 Subscribe
			4 STRAND LANDING TABLE, 15' X 13', H78 ROOFTOP CHAIN, 6 STRAND LUGGED TRIM TABLE, END & MIDDLE TRIM; 15'W X 7 TO 14' X 4' 8 STRAND TRANSFER	🔒 Subscribe
			TRAVELLING LUMBER STACKER SYSTEM, CONTROLS, 4 STRAND BAR TYPE UNSCRAMBLER, HYDRAULIC POWER UNIT, STEEL TRACKS	🔒 Subscribe
			APPROX. (200) 9-1/4" SAWS	🔒 Subscribe
2002	SALTON		2002 SALTON STEAM HEATED DOUBLE TRACK DRY KILN, 33'W X 54'L; 20' X 32' KILN CONTROL BUILDING; VARIABLE SPEED AIR CIRCULATION; SALTON STEAM HEATED DRY KILN. OCTOBER 2002 DOUBLE TRACK: 33W X 54L; BOLTED ALUMINUM BUILDING VARIABLE SPEED AIR CIRCULATION (12) 48 ADJUSTABLE PITCH FANS, INFINITELY VARIABLE PITCH; INTERNALLY MOUNTED; COMPUTER BALANCED BOTH STATICALLY AND DYNAMICALLY; FULLY REVERSIBLE; DIRECT DRIVE AND CROSS SHAFT MOUNTED TO 5HP KILN DUTY MOTORS. 2002 · SALTON	🔒 Subscribe
	BOILERMATE	CFBLS-70743-6-15	BOILERMATE CFBLS-70743-6-15 BOILER; NG, 2800M BTU/504M BTU BOILERMATE · CFBLS-70743-6-15	🔒 Subscribe
2004	WADKIN	NZ300	2004 WADKIN NZ300 STRAIGHT KNIFE PLANER HEAD GRINDER; 4" (100MM) GRINDING WHEEL; 330MM MAX CUTTER LENGTH, 300MM MAX CUTTER DIAMETER 2004 · WADKIN · NZ300	🔒 Subscribe
			4 STRAND PACKAGE BREAKDOWN DECK W/ MOTOR & REDUCER, 15' X 23' TO 3 ARM TILT HOIST, 15'W, 51" HEIGHT, MECHANICAL	🔒 Subscribe
	SEW EURODRIVE		SEW EURODRIVES FOR ANTHON PANEL SIZER LINE SEW EURODRIVE	🔒 Subscribe
	PURESTREAM	ACT-500	PURESTREAM ACT-500 AIR DRYER PURESTREAM · ACT-500	🔒 Subscribe

Year	Make	Model	Description	Price
	AIRE CURE	376AC10	AIRE CURE 376AC10 REVERSE AIR BAGHOUSE SYSTEM, 52,800 CFM, 376 BAGS, 10' LENGTH, REVERSE PULSE CLEANING, W/ ALLIED ROTARY AIRLOCK	🔒 Subscribe
	JOULIN	1038-02 N1200	JOULIN 1038-02 N1200 VACUUM STACKING SYSTEM, 8' X 5" 8000LB SCISSORLIFT W/ (8) POWERED CHAINS, HYDRAULIC POWER UNIT, OVERHEAD TRACK SYSTEM , JOULIN PLC, CONTROLS, 7'3" X 54" 5 STRAND TRACKED 90 DEGREE TRANSFER TO W/ (2) 1HP, 230/460V DRIVES	🔒 Subscribe
	MANN-RUSSELL	10' CONTINUOUS CROSS-FLOW LUMBER EDGE GLUER	MANN-RUSSELL 10' CONTINUOUS CROSS-FLOW LUMBER EDGE GLUER; RADIO FREQUENCY (RF) PRESS, 10' LINE, 480V, 103KVA; S/N S0061AUTOMATED INFEED SECTION: 9'6" X 87" 8 STRAND, R450 CHAIN, USED FOR EDGE GLUING 20MM X 36MM LAMELS INTO A CHARGE UP TO 1220MMW AHEAD OF THE PRESS; 12 RO 1-1/2 STOCK THICKNESS; SPEED RANGE 2-12 FPM; OPEL-P- PRODUCTS HYDRA CEL 1HP HYDRAULIC PUMP, GRACO 1050 PUMP, AUTO LOAD CONTROL TO 6.7 MHZ; SOLID STATE 3PH FULL WAVE BRIDGE RECTIFIER; SOLID STATE OVERLOAD PANEL; MANN-RUSSELL OSCILLATOR CIRCUIT, W/ TWIN VACUUM POWER TRIODES, OPERATING PUSH-PULL; MANN-RUSSELL 1750C RADIO FREQUENCY GENERATOR, W/ INFEED TRANSFORMERS; HIGH SPEED TRAVELING CUT-OFF SAW, 18 SAW BLADE 48 TOOTH STRAIGHT CARBIDE;	🔒 Subscribe
	ANTHON	CD6 WWS 130	ANTHON CD6 WWS 130 PANEL CALLIBRATION/SANDING MACHINE; S/N: 99.2.-19; 6 HEAD; (4) 100HP MOTORS, (2) 50HP MOTORS; SANDING WIDTH: 1300MM; MIN/MAX HEIGHT: 155MM; FEED SPEED: 5-30M/MINUTE; WEIGHT 19.720 KG; 480V	🔒 Subscribe
			CABINET OF BAGHOUSE BLOWER CONTROLS, DISCONNECTS	🔒 Subscribe
			4 STRAND INFEED PACKAGE BREAKDOWN DECK, 13' X 22.5'L; TO 4 ARM 12'6" HYDRAULIC TILT HOIST, 51" ARMS, 50" HEIGHT, 10HP HPU	🔒 Subscribe
2000	CHALLENGER	CG1000-5075-S-D-T	2000 CHALLENGER CG1000-5075-S-D-T WOOD WASTE YARD GRINDER S/N: 1100G0262; (2) 100HP (75KW) MOTORS; 480V 3PH; INLINE 9 X 14 SCREW AUGER; 11 ROLL GRIZZLY, W/ CONTROL PANEL, CUTLER HAMMER 200AMP DISCONNECT	🔒 Subscribe
2002	ANTHON	LNB/LNB-28	2002 ANTHON LNB/LNB-28 PANEL SIZER LINE: ANTHON LNB/LNB-28 MACHINE PRESSURE BEAM ACTS AS SUCTION DUCT FOR SAW CLAMPS.5/13.5 CNC PANEL SIZER FOR AUTO RIP & CROSS CUTTING OF SOLID WOOD; LENGTH 2800MM X WIDTH 1220MM; RAW BOARD MIN: 900 X 800MM; THICKNESS 12-38MM; RIPPING LENGTH: 2850MM; CROSS CUTTING LENGTH: 1350; MIN. FINISHED PART: 415 X 143MM; COMPRISED OF: INSPECTION ROLLER TRACK W/ LIFTABLE FRAME, INSPECTION ROLLER TRACK W/ LIFTABLE FRAME, BOOK FORMING STATION W/ LIFTING TABLE, MAX STACK 800MM, ROLLER TRACK W/ FORKLIFT SLITS, INTERMEDIATE POWER ROLLER TRACK, ANGULAR SAW SYSTEM, INCLUDING: PREP TABLE FOR RIP CUT POSITIONING, GUIDE SYSTEM, RIP SAW LNB 28.5: STRAIGHT RIP OR USED FOR TRIMMING APPROX. 20MM; SAW CARRIAGE SPEED 60M/MIN., & 80M/MIN RETURN; CROSS TRANSFER SYSTEM W/ LIFTABLE ROLLER TRACK FOR SMALL STRIPS, PREP TABLE CROSS CUT SAW W/ POSITIONING FEEDER, CROSS CUT SAW LNB 13.5, SWITCHGEAR, MICRO PROCESSOR CONTROLS; DESTACKING: INTERMEDIATE ROLLER TRACK W/ TRIM CUT SLUICE, ANGULAR TRANSFER	🔒 Subscribe
			WAYCON 9' X 20' 5 STRAND TRIM TABLE, 13' TO 24' BOARDS; (2) OVERHEAD ADJUSTABLE TRIM SAWS, 10HP, 230/460V	🔒 Subscribe
2008	ARPAC	TS833CF	2008 ARPAC TS833CF SHRINK WRAP SYSTEM S/N: 10204; 18" X 18' INFEED BELT CONVEYOR W/ GEAR DRIVE, WRAP DISPENSERS & RACKS, POWER OUTFEED ROLLCASE, 16 X 9; 2008 ARPAC MPD1222120 12 HEAT TUNNEL; S/N 11064, POWER ROLLCASE, 12 X 10; AIR OPERATED PUSH OFF BAR TO DECLINE 4 RUN TIPPLE ROLL TRANSFER W/ BOTTOM STOP; C/W OUTFEED ROLLS VFD	🔒 Subscribe
	YASKASWA MOTOMAN	SP400X	YASKASWA MOTOMAN SP400X ROBOTIC PLACER W/ REMOTE CONTROL; ATTACHED TO (4) CONVEYORS, PALLET STATION & PAPER ROLL STORAGE; HORIZONTAL STROKE 3100MM, VERTICAL STROKE 2200 MM; GRIPPER ARM CAPACITY 400KG; GRIPPING TOOLS IS FORK & PNEUMATICK HOLD-DOWN CYLINDERS	🔒 Subscribe
	WESTINGHOUSE	8 SECTION MCC	WESTINGHOUSE 8 SECTION MCC, (41) SWITCHES	🔒 Subscribe
	WAYCON MFG		WAYCON MFG TARPING STATION, 30', 198" CLEAR PLATFORM	🔒 Subscribe
	WADKIN	SUPER XJS220	WADKIN SUPER XJS220 9 HEAD HEAD MOULDER; 5" X 9" (130 X 230MM) CAPACITY; MIN SIZE FINISHED LUMBER: - WADKIN SUPER XJS220 9 HEAD HEAD MOULDER; 5 X 9 (130 X 230MM) CAPACITY; MIN SIZE FINISHED LUMBER: 15MM X 6MM THICK; 10 - 120M/MINUTE; JOINTED; 2 1/8" TOP/BOTTOM SPINDLE; 1 13/16" SIDE HEAD SPINDLE	🔒 Subscribe
	GARDNER DENVER	ELECTRA SCREW 100HP	GARDNER DENVER ELECTRA SCREW 100HP COMPRESSOR, 3,966 HOURS; 230/460V	🔒 Subscribe
2002	ARPAC	GREAT LAKES TS37 NE	2002 ARPAC GREAT LAKES TS37 NE SHRINK WRAP SYSTEM S/N: 4815; CONTINUOUS MOTION ADJUSTABLE SIDE SEAL WRAPPER W/ SHANKLIN T-72 FREE STANDING HEAT TUNNEL; 5 RUN LATERAL INFEED TRANSFER, RUBBER RUNS ON STEEL FRAME; 12 X 17 BELT INFEED CONVEYOR; BRAKED; (2) 12 X 10 POWER ROLLCASES; AIR OP. PUSHOFF BAR TO DECLINE TIPPLE ROLL WITH BOTTOM STOP; 460V; W/ VARIABLE FREQUENCY DRIVE	🔒 Subscribe
	GRECON		GRECON DUST SYSTEM SPARK DETECTION CONTROLS W/ SENSOR DETECTOR SECTIONS OF BLOWER PIPE	🔒 Subscribe
			40 UNIT SHAVINGS BINS, CLAMSHELL DUMPS; 5HP HPU; W/ 5' & 4' CYCLONES, W/ TARPING STATION	🔒 Subscribe
	GROSS	GAZ-102	GROSS GAZ-102 WOOD WASTE GRINDER; 348MM ROTOR DIAMETER; 480V; C/W CONTROL PANEL	🔒 Subscribe
	ULTIMIZER	14B-100 SERIES II	ULTIMIZER 14B-100 SERIES II OPTIMIZING CHOP LINE, CONTROLS, 16' INFEED TABLE, W/ OUTFEED BELT 9" X 24'8" W/ 3HP DRIVE	🔒 Subscribe
	SYSTEM TM/AS	4 STRAND UHMW LUGGED TRIM TABLE	SYSTEM TM/AS 4 STRAND UHMW LUGGED TRIM TABLE, 7' X 30', UNIFAB OVERHEAD ADJUSTABLE 2 SAW TRIMMER; LASER GUIDES, 76" X 7', 3 STRAND LANDING TABLE , 92" X 13' EVEN ENDING ROLLS, 76" X 7'6" 3 STRAND OUTFEED W/ 11" X 17' WASTE BELT W/ DRIVE	🔒 Subscribe
	SYSTEM	M231	SYSTEM M231 MOULDER INFEED W/ (2) HURRY UP ROLLS TO (2) HOLD DOWN BARS, 8" X 12'6" BELT CONVEYOR W/ FENCE	🔒 Subscribe
	EURUS	MB6024	EURUS MB6024 ROTARY HIGH PRESSURE BLOWER; 50HP, 208-230/460V, RATED 2300ICFM @ 4 PSIG X 2238 RPM, W/ STARTER CONTROL PANEL	🔒 Subscribe
			ALL TECK CABLE FROM MAIN PDC ROOMS TO MCC'S TO MACHINERY ( NO CUTTING WITHIN 6" OF EQUIPMENT MOTORS)	🔒 Subscribe
			LONG LENGTH CYCLONE, 13' DIAMETER, W/ STEEL FRAME & ALLIED FEEDER, 7.5HP, 208-230/460V MOTOR & RADICON 30/1 REDUCER	🔒 Subscribe
	BAUM	7.5HP HIGH PRESSER BLOWER	BAUM 7.5HP HIGH PRESSER BLOWER, 460V	🔒 Subscribe
	ISCO	EL96-2	ISCO EL96-2 HIGH SPEED AUTO STACKER PLC & CONTROL; RIGHT ANGLE INFEED TRANSFER: 30 X 9L DROP ROLL ROLLCASE, W/ (7) 1 X 5 RUBBER, CROSS FEED BELTS TO STACKER; 5 X 8 SCISSOR LIFT, POWER ROLLCASE TOP; S/N: 00136	🔒 Subscribe
			2 SAW TRIMMER W/ 96" X 12'4" 6 STRAND LUGGED THROUGHFEED, UHMW LINED, (4) EVEN ENDING ROLLS , WASTE BELT CONVEYOR, 12" X 11"	🔒 Subscribe
			RF PRESS OUTFEED ROLLCASE, 48" X 12'6", W/ MOTOR & REDUCER,W/ 15 STRAND RUBBER CROSS BELTS	🔒 Subscribe
			12' X 21' 3 STRAND PACKAGE INFEED TRANSFER, TO 54" X 25' PACKAGE ROLLCASE SQUEEZE W/ END BUMP AND GUILLOTINE GATE W/ HPU	🔒 Subscribe
			10' LONG LENGTH CYCLONE	🔒 Subscribe
	NELSON	600	NELSON 600 150HP BLOWER, 460V, W/ CUTLER HAMMER 400AMP DISCONNECT	🔒 Subscribe
	WRIGHT	W-150 HD	WRIGHT W-150 HD B AUTO TOP & FACE CIRCLE SAW SHARPENER	🔒 Subscribe
	FPE	MAIN PDC	FPE MAIN PDC, 1200 AMP; 277/480V	🔒 Subscribe
			ELEVATED STEEL WALKWAY PLATFORM & FRAME, 180', (20 SETS OF STAIRS)	🔒 Subscribe
	INGERSOLL-RAND	100HP SCREW COMPRESSOR	INGERSOLL-RAND 100HP SCREW COMPRESSOR, 145 PSIG; 56,509 HOURS; 460V S/N: IRN100H-CC	🔒 Subscribe
	SIGNODE	COMPRESSION PACKAGE STRAPPER	SIGNODE COMPRESSION PACKAGE STRAPPER W/ SIGNODE 3 STEEL STRAPPING HEAD	🔒 Subscribe
	ANTHON	LB-2	ANTHON LB-2 LABEL PLACING UNIT COMPRISED OF: FRICTION FEEDER, MODEL LB-2; FEED WIDTH 250MM; TRANSPORT CONVEYOR, 2500MM LENGTH; 800MM BELT WIDTH; 834MM CONVEYOR WIDTH; VARIABLE SPEED TO APPROX 35M/MIN; DOUBLE SHEET CONTROL; COVER FOR FRICTION FEED UNIT; IONIZATION UNIT: CHARGING ELECTRODE 30 KV; GENERATOR; FORMAT SIZE: MAX 630 X 180MM; MIN 350 X 140MM; FORMAT SIZE: MAX 630 X 180MM; MIN 350 X 140MM; LONGITUDINAL FEED; 35 CYCLES/MIN.; SAMUEL SOA750-36 FULLY AUTOMATIC ORBITAL BANDER, S/N 750/36-10_ _ 051813; 110/240V 1PH, LABELLING SYSTEM; POWER OUTFEED ROLLCASE, 30 X 6L.	🔒 Subscribe
			24 UNIT SHAVINGS BIN, 10' DIAMETER LONG LENGTH CYCLONE	🔒 Subscribe
	WRIGHT	W-350 SUPER HD	WRIGHT W-350 SUPER HD DUAL SIDE GRINDER	🔒 Subscribe
	ALLEN BRADLEY	4 SECTION MCC	ALLEN BRADLEY 4 SECTION MCC (130 SWITCHES, VARIABLE FRQUENCY DRIVE)	🔒 Subscribe
			4 STRAND LANDING TABLE, 15' X 13', H78 ROOFTOP CHAIN, 6 STRAND LUGGED TRIM TABLE, END & MIDDLE TRIM; 15'W X 7 TO 14' X 4' 8 STRAND TRANSFER	🔒 Subscribe
			TRAVELLING LUMBER STACKER SYSTEM, CONTROLS, 4 STRAND BAR TYPE UNSCRAMBLER, HYDRAULIC POWER UNIT, STEEL TRACKS	🔒 Subscribe
			APPROX. (200) 9-1/4" SAWS	🔒 Subscribe
2002	SALTON		2002 SALTON STEAM HEATED DOUBLE TRACK DRY KILN, 33'W X 54'L; 20' X 32' KILN CONTROL BUILDING; VARIABLE SPEED AIR CIRCULATION; SALTON STEAM HEATED DRY KILN. OCTOBER 2002 DOUBLE TRACK: 33W X 54L; BOLTED ALUMINUM BUILDING VARIABLE SPEED AIR CIRCULATION (12) 48 ADJUSTABLE PITCH FANS, INFINITELY VARIABLE PITCH; INTERNALLY MOUNTED; COMPUTER BALANCED BOTH STATICALLY AND DYNAMICALLY; FULLY REVERSIBLE; DIRECT DRIVE AND CROSS SHAFT MOUNTED TO 5HP KILN DUTY MOTORS.	🔒 Subscribe
	BOILERMATE	CFBLS-70743-6-15	BOILERMATE CFBLS-70743-6-15 BOILER; NG, 2800M BTU/504M BTU	🔒 Subscribe
2004	WADKIN	NZ300	2004 WADKIN NZ300 STRAIGHT KNIFE PLANER HEAD GRINDER; 4" (100MM) GRINDING WHEEL; 330MM MAX CUTTER LENGTH, 300MM MAX CUTTER DIAMETER	🔒 Subscribe
			4 STRAND PACKAGE BREAKDOWN DECK W/ MOTOR & REDUCER, 15' X 23' TO 3 ARM TILT HOIST, 15'W, 51" HEIGHT, MECHANICAL	🔒 Subscribe
	SEW EURODRIVE		SEW EURODRIVES FOR ANTHON PANEL SIZER LINE	🔒 Subscribe
	PURESTREAM	ACT-500	PURESTREAM ACT-500 AIR DRYER	🔒 Subscribe

AIRE CURE 376AC10

DUST COLLECTION EQUIPMENT

AIRE CURE 376AC10 REVERSE AIR BAGHOUSE SYSTEM, 52,800 CFM, 376 BAGS, 10' LENGTH, REVERSE PULSE CLEAN...

Hammer Price: 🔒

JOULIN 1038-02 N1200

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

JOULIN 1038-02 N1200 VACUUM STACKING SYSTEM, 8' X 5" 8000LB SCISSORLIFT W/ (8) POWERED CHAINS, HYDRA...

Hammer Price: 🔒

MANN-RUSSELL 10' CONTINUOUS CROSS-FLOW LUMBER EDGE GLUER

WOODWORKING EQUIPMENT

MANN-RUSSELL 10' CONTINUOUS CROSS-FLOW LUMBER EDGE GLUER; RADIO FREQUENCY (RF) PRESS, 10' LINE, 480...

Hammer Price: 🔒

ANTHON CD6 WWS 130

WOODWORKING EQUIPMENT

ANTHON CD6 WWS 130 PANEL CALLIBRATION/SANDING MACHINE; S/N: 99.2.-19; 6 HEAD; (4) 100HP MOTORS, (2) ...

Hammer Price: 🔒

MISC

CABINET OF BAGHOUSE BLOWER CONTROLS, DISCONNECTS...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

4 STRAND INFEED PACKAGE BREAKDOWN DECK, 13' X 22.5'L; TO 4 ARM 12'6" HYDRAULIC TILT HOIST, 51" ARMS,...

Hammer Price: 🔒

2000 CHALLENGER CG1000-5075-S-D-T

WOODWORKING EQUIPMENT

2000 CHALLENGER CG1000-5075-S-D-T WOOD WASTE YARD GRINDER S/N: 1100G0262; (2) 100HP (75KW) MOTORS; 4...

Hammer Price: 🔒

2002 ANTHON LNB/LNB-28

WOODWORKING EQUIPMENT

2002 ANTHON LNB/LNB-28 PANEL SIZER LINE: ANTHON LNB/LNB-28 MACHINE PRESSURE BEAM ACTS AS SUCTION DUC...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

WAYCON 9' X 20' 5 STRAND TRIM TABLE, 13' TO 24' BOARDS; (2) OVERHEAD ADJUSTABLE TRIM SAWS, 10HP, 230...

Hammer Price: 🔒

2008 ARPAC TS833CF

PACKAGING EQUIPMENT

2008 ARPAC TS833CF SHRINK WRAP SYSTEM S/N: 10204; 18" X 18' INFEED BELT CONVEYOR W/ GEAR DRIVE, WRAP...

Hammer Price: 🔒

YASKASWA MOTOMAN SP400X

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

YASKASWA MOTOMAN SP400X ROBOTIC PLACER W/ REMOTE CONTROL; ATTACHED TO (4) CONVEYORS, PALLET STATION ...

Hammer Price: 🔒

WESTINGHOUSE 8 SECTION MCC

ELECTRICAL AND POWER GENERATION EQUIPMENT

WESTINGHOUSE 8 SECTION MCC, (41) SWITCHES...

Hammer Price: 🔒

WAYCON MFG

MISC

WAYCON MFG TARPING STATION, 30', 198" CLEAR PLATFORM...

Hammer Price: 🔒

WADKIN SUPER XJS220

WOODWORKING EQUIPMENT

WADKIN SUPER XJS220 9 HEAD HEAD MOULDER; 5" X 9" (130 X 230MM) CAPACITY; MIN SIZE FINISHED LUMBER: -...

Hammer Price: 🔒

GARDNER DENVER ELECTRA SCREW 100HP

AIR COMPRESSORS

GARDNER DENVER ELECTRA SCREW 100HP COMPRESSOR, 3,966 HOURS; 230/460V...

Hammer Price: 🔒

2002 ARPAC GREAT LAKES TS37 NE

PACKAGING EQUIPMENT

2002 ARPAC GREAT LAKES TS37 NE SHRINK WRAP SYSTEM S/N: 4815; CONTINUOUS MOTION ADJUSTABLE SIDE SEAL ...

Hammer Price: 🔒

GRECON

DUST COLLECTION EQUIPMENT

GRECON DUST SYSTEM SPARK DETECTION CONTROLS W/ SENSOR DETECTOR SECTIONS OF BLOWER PIPE...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

40 UNIT SHAVINGS BINS, CLAMSHELL DUMPS; 5HP HPU; W/ 5' & 4' CYCLONES, W/ TARPING STATION...

Hammer Price: 🔒

GROSS GAZ-102

WOODWORKING EQUIPMENT

GROSS GAZ-102 WOOD WASTE GRINDER; 348MM ROTOR DIAMETER; 480V; C/W CONTROL PANEL...

Hammer Price: 🔒

ULTIMIZER 14B-100 SERIES II

WOODWORKING EQUIPMENT

ULTIMIZER 14B-100 SERIES II OPTIMIZING CHOP LINE, CONTROLS, 16' INFEED TABLE, W/ OUTFEED BELT 9" X 2...

Hammer Price: 🔒

SYSTEM TM/AS 4 STRAND UHMW LUGGED TRIM TABLE

WOODWORKING EQUIPMENT

SYSTEM TM/AS 4 STRAND UHMW LUGGED TRIM TABLE, 7' X 30', UNIFAB OVERHEAD ADJUSTABLE 2 SAW TRIMMER; LA...

Hammer Price: 🔒

SYSTEM M231

WOODWORKING EQUIPMENT

SYSTEM M231 MOULDER INFEED W/ (2) HURRY UP ROLLS TO (2) HOLD DOWN BARS, 8" X 12'6" BELT CONVEYOR W/ ...

Hammer Price: 🔒

EURUS MB6024

MISC

EURUS MB6024 ROTARY HIGH PRESSURE BLOWER; 50HP, 208-230/460V, RATED 2300ICFM @ 4 PSIG X 2238 RPM, W...

Hammer Price: 🔒

MISC

ALL TECK CABLE FROM MAIN PDC ROOMS TO MCC'S TO MACHINERY ( NO CUTTING WITHIN 6" OF EQUIPMENT MOTORS)...

Hammer Price: 🔒

DUST COLLECTION EQUIPMENT

LONG LENGTH CYCLONE, 13' DIAMETER, W/ STEEL FRAME & ALLIED FEEDER, 7.5HP, 208-230/460V MOTOR & RADIC...

Hammer Price: 🔒

BAUM 7.5HP HIGH PRESSER BLOWER

MISC

BAUM 7.5HP HIGH PRESSER BLOWER, 460V...

Hammer Price: 🔒

ISCO EL96-2

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

ISCO EL96-2 HIGH SPEED AUTO STACKER PLC & CONTROL; RIGHT ANGLE INFEED TRANSFER: 30 X 9L DROP ROLL RO...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

2 SAW TRIMMER W/ 96" X 12'4" 6 STRAND LUGGED THROUGHFEED, UHMW LINED, (4) EVEN ENDING ROLLS , WASTE ...

Hammer Price: 🔒

MISC

RF PRESS OUTFEED ROLLCASE, 48" X 12'6", W/ MOTOR & REDUCER,W/ 15 STRAND RUBBER CROSS BELTS...

Hammer Price: 🔒

MISC

12' X 21' 3 STRAND PACKAGE INFEED TRANSFER, TO 54" X 25' PACKAGE ROLLCASE SQUEEZE W/ END BUMP AND GU...

Hammer Price: 🔒

MISC

10' LONG LENGTH CYCLONE...

Hammer Price: 🔒

NELSON 600

MISC

NELSON 600 150HP BLOWER, 460V, W/ CUTLER HAMMER 400AMP DISCONNECT...

Hammer Price: 🔒

WRIGHT W-150 HD

WOODWORKING EQUIPMENT

WRIGHT W-150 HD B AUTO TOP & FACE CIRCLE SAW SHARPENER...

Hammer Price: 🔒

FPE MAIN PDC

MISC

FPE MAIN PDC, 1200 AMP; 277/480V...

Hammer Price: 🔒

MISC

ELEVATED STEEL WALKWAY PLATFORM & FRAME, 180', (20 SETS OF STAIRS)...

Hammer Price: 🔒

INGERSOLL-RAND 100HP SCREW COMPRESSOR

AIR COMPRESSORS

INGERSOLL-RAND 100HP SCREW COMPRESSOR, 145 PSIG; 56,509 HOURS; 460V S/N: IRN100H-CC...

Hammer Price: 🔒

SIGNODE COMPRESSION PACKAGE STRAPPER

PACKAGING EQUIPMENT

SIGNODE COMPRESSION PACKAGE STRAPPER W/ SIGNODE 3 STEEL STRAPPING HEAD...

Hammer Price: 🔒

ANTHON LB-2

PACKAGING EQUIPMENT

ANTHON LB-2 LABEL PLACING UNIT COMPRISED OF: FRICTION FEEDER, MODEL LB-2; FEED WIDTH 250MM; TRANSPOR...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

24 UNIT SHAVINGS BIN, 10' DIAMETER LONG LENGTH CYCLONE...

Hammer Price: 🔒

WRIGHT W-350 SUPER HD

WOODWORKING EQUIPMENT

WRIGHT W-350 SUPER HD DUAL SIDE GRINDER...

Hammer Price: 🔒

ALLEN BRADLEY 4 SECTION MCC

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

ALLEN BRADLEY 4 SECTION MCC (130 SWITCHES, VARIABLE FRQUENCY DRIVE)...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

4 STRAND LANDING TABLE, 15' X 13', H78 ROOFTOP CHAIN, 6 STRAND LUGGED TRIM TABLE, END & MIDDLE TRIM;...

Hammer Price: 🔒

MISC

TRAVELLING LUMBER STACKER SYSTEM, CONTROLS, 4 STRAND BAR TYPE UNSCRAMBLER, HYDRAULIC POWER UNIT, STE...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

APPROX. (200) 9-1/4" SAWS...

Hammer Price: 🔒

2002 SALTON

WOODWORKING EQUIPMENT

2002 SALTON STEAM HEATED DOUBLE TRACK DRY KILN, 33'W X 54'L; 20' X 32' KILN CONTROL BUILDING; VARIAB...

Hammer Price: 🔒

BOILERMATE CFBLS-70743-6-15

BOILERS

BOILERMATE CFBLS-70743-6-15 BOILER; NG, 2800M BTU/504M BTU...

Hammer Price: 🔒

2004 WADKIN NZ300

WOODWORKING EQUIPMENT

2004 WADKIN NZ300 STRAIGHT KNIFE PLANER HEAD GRINDER; 4" (100MM) GRINDING WHEEL; 330MM MAX CUTTER LE...

Hammer Price: 🔒

MISC

4 STRAND PACKAGE BREAKDOWN DECK W/ MOTOR & REDUCER, 15' X 23' TO 3 ARM TILT HOIST, 15'W, 51" HEIGHT,...

Hammer Price: 🔒

SEW EURODRIVE

MISC

SEW EURODRIVES FOR ANTHON PANEL SIZER LINE...

Hammer Price: 🔒

PURESTREAM ACT-500

AIR COMPRESSORS

PURESTREAM ACT-500 AIR DRYER...

Hammer Price: 🔒

1 2 3 4 5 ... 9 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Day 1 Greenwood Forest Products 1983 Ltd 2 Day Online Auction

Save to Project Folder

Print Options

Save to Project Folder