CNCEXCHANGE 50 SUPER HIGH END CNC MACHINE TOOLSConsignment Auction Sale Multiple Locations DMG MORI CR ONSRUD CITIZEN STAR NOMURA OKUMA

2020 BROTHER SPEEDIO S700X1 5-AXIS CNC DRILL TAP VERTICAL MACHINING CENTER SPECIFICATIONS: CONTROL BROTHER CNC-C00 TABLE SIZE 31.5 X 15.7 X-AXIS TRAVEL 27.5" Y-AXIS TRAVEL 15.4" Z-AXIS TRAVEL 11.8" SPINDLE SPEED 16,000 RPM SPINDLE MOTOR 10 HP TOOL CHANGER 21 SPINDLE TAPER BT 30 TOOL CHANGE TIME (CHIP/CHIP)1.4 SECONDS TOOL CHANGE TIME (TOOL/TOOL)0.8 SECONDS MACHINE DIMENSIONS80.7X87.4X98.3 MACHINE WEIGHT5,300 LBS BROTHER CNC-C00 CNC CONTROL 21 POSITION TOOL CHANGER 5TH AXIS NIKKEN 5AX130 ROTARY TABLE AND TAILSTOCK COOLANT SYSTEM RIGID TAP 16,000 RPM SPINDLE HIGH PRESSURE COOLANT THRU SPINDLE PROBING TOOL SETTER LNS CHIP CONVEYOR TOOL HOLDERS NOT INCLUDED

2011 HAAS VF-7/40 CNC 4-AXIS VERTICAL MACHINING CENTER. TRAVELS: X AXIS.......................: 84" Y AXIS.......................: 32" Z AXIS.......................: 30" SPINDLE NOSE TO TABLE........: 34" MAX SPINDLE NOSE TO TABLE........: 4" MIN SPINDLE: HP...........................: 20 MAX SPEED....................: 10000 RPM MAX TORQUE...................: 90 FT-LBF @ 2000 RPM 2 SPEED GEAR DRIVE...........: YES TAPER........................: 40 TABLE: LENGTH.......................: 84" WIDTH........................: 28" MAX WEIGHT ON TABLE..........: 4,000 LBS FEEDRATES: MAX THRUST X.................: 3400 LBF MAX THRUST Y.................: 3400 LBF MAX THRUST Z.................: 5600 LBF TOOL CHANGER.................: 24 + 1 ATC RIDGID TAPPING.............. 4TH AXIS DRIVE & WIRING.... WITH ROTARY TABLE WIRED FOR WHIPS PROBING, NO SPINDLE PROBE OR TOOL SETTER PROBE ONLY CUT ALUMINUM

2015 STAR SW-20 (ECAS 20) CNC SWISS TYPE AUTOMATIC SCREW MACHINE S/N: 259, SPECIFICATIONS, THE SW-20 COMES EQUIPPED WITH OPPOSING TOOL POSTS FOR SIMULTANEOUS MACHINING ON THE MAIN SPINDLE AND AN 8 STATION BACK WORKING PLATEN FOR OVERLAPPED MACHINING ON THE SUB-SPINDLE. THE OPPOSING PLATENS CAN BE USED TO MACHINE DIFFERENT FEATURES AT THE SAME TIME BY USING STARS UNIQUE SUPER-POSITIONING MODE FUNCTION AND THE INDEPENDENT Z3 AXIS. THIS ENABLES EVEN SHORTER CYCLE TIMES AS MORE OPERATIONS CAN BE OVERLAPPED. FANUCS USER FRIENDLY 31IB5 CNC CONTROL ENSURES PROGRAMMING THE THREE CHANNELS IS SIMPLE AND UNDEMANDING. IN ADDITION THE CONTROL IS EQUIPPED WITH STAR MOTION CONTROL. THIS FUNCTION RE-FORMATS THE CUTTING PROGRAM TO MINIMIZE IDLE TIME AND FURTHER REDUCE CYCLE TIMES., THE Y2 AXIS ON THE SUB-SPINDLE PLATEN ALLOWS BOTH CROSS WORKING AND FRONT FACING POWER TOOLS TO BE MOUNTED., STAR SW-20, WORKPIECE, DIAMETER 20MM / 22.2MM (OPT), LENGTH 205MM, GEOMETRY , C AXIS C AXIS MAIN + SUB SPINDLE, BENEFITS, STANDARD MACHINING DIAMETER 20MM (22.2MM OPT), Z1 STROKE OF 205MM, HIGH SPEED MAIN AND SUB-SPINDLES @ 10,000 RPM, SAME POWER ON MAIN AND SUB-SPINDLE @ 3.7KW, OPPOSED TWIN PLATEN FOR BALANCED MACHINING ON MAIN SPINDLE, SUPER-POSITIONING MODE WITH INDEPENDENT Z3 AXIS, STAR MOTION CONTROL TO MINIMIZE IDLE TIME, 8 STATION SUB-SPINDLE PLATEN FOR MAXIMUM OVERLAPPING, ERGONOMIC DESIGN WITH UP & OVER DOOR AND SWING OUT CONTROL, NUMBER OF AXIS 11, MAIN SPINDLE (HEADSTOCK) Z1 / C1 AXIS, TOOL POST X1 / Y1 / X3 / Y3 / Z3 AXIS, MAX. MACHINING DIAMETER 20 MM / 22.2 MM (OPTION), HEADSTOCK STROKE 205 MM, MAIN SPINDLE POWER 3.7 KW, MAIN SPINDLE SPEED 10,000 RPM, MAIN SPINDLE TOOLING, TURNING TOOL 6 TOOLS @ 12 MM SQ, DRILLING ARM SLEEVE HOLDER CAPACITY 4 X 22 MM SLEEVES (ER16), POWER DRIVEN TOOL (PDT) POSITIONS 1 + 5 MODULAR STATIONS, MAX (PDT) SPEED 8,000 RPM, KINEMATIC DIAGRAM, STAR SW-20 - KINEMATIC DIAGRAM, SUB SPINDLE SIDE, SUB SPINDLE X2 / Z2 / C2 AXIS, MAX. CHUCKING DIAMETER 20 MM / 22.2 MM (OPTION), SUB SPINDLE POWER 3.7 KW, SUB SPINDLE SPEED 10,000 RPM, SUB SPINDLE TOOLING, BACK-WORKING PLATEN POSITIONS 8, MAX DRILL SLEEVE CAPACITY ER16, POWER DRIVEN TOOL (PDT) POSITIONS 6 (ER16), MAX (PDT) SPEED 8,000 RPM, EQUIPPED WITH, FANUC CNC CONTROL, LNS ALPHA ST320 BAR FEED, MIST COLLECTOR, NEW SPINDLE BEARINGS 5/2024

2015 HAAS VF-5/40 4-AXIS CNC VERTICAL MACHINING CENTER S/N: 1122496, SPECIFICATIONS, SPECS:, X AXIS TRAVEL: 50", Y AXIS TRAVEL: 26", Z AXIS TRAVEL: 25", RAPID RATE X AXIS: 710 IPM, RAPID RATE Y AXIS: 710 IPM, RAPID RATE Z AXIS: 710 IPM, MAX TABLE LOAD: 4,000 LBS, SPINDLE MOTOR: 30 HP, SPINDLE SPEED: 8,100 RPM, SPINDLE TAPER: 40 CT, TOOL CHANGER: 24 ATC, MAX CUTTING: 500 IPM, MAX THRUST X: 2550 LB., MAX THRUST Y: 4100 LB., MAX THRUST Z: 4100 LB., MAX TOOL DIAMETER: 3.5", MAX TOOL WEIGHT: 12 LB., TOOL-TO-TOOL (AVG): 4.2 S, CHIP-TO-CHIP (AVG): 4.5 S, TABLE SIZE: 54" X 24", EQUIPPED WITH, HAAS CNC CONTROLS, 8100 RPM SPINDLE, THROUGH-SPINDLE COOLANT SYSTEM, 4TH AXIS READY ( DRIVES AND WIRING INSTALLED ), REMOTE JOG HANDLE, RIGID TAPPING, HIGH SPEED MACHINING, WIPS INTUITIVE PROBING RENISHAW READY (NO SPINDLE PROBE), 24 AUTOMATIC SIDE MOUNT TOOL CHANGER, PROGRAMMABLE COOLANT NOZZLE, TELESCOPIC WAY COVERS, AUGER CHIP CONVEYOR SYSTEM, 95-GALLON FLOOD COOLANT SYSTEM, AUXILIARY COOLANT FILTRATION,

2016 NOMURA NN32YB2 32MM CNC SWISS TYPE AUTOMATIC LATHE W/EDGE BARFEED, S/N 168011506, SPECIFICATIONS, SPECIFICATION VALUE NN-32YB, MAX. MACHINING CAPACITY MAIN MAX. MACHINING DIAMETER 32MM(1.26"), MAX.MACHINING LENGTH 190MM (7.48") / CHUCK, ID TOOL 4, ID TOOL LENGTH 50MM (1.97"), ID TAP M10 1.5, LIVE TOOL 8MM (0.31"), LIVE TAP M8 1.25, BACK PARTS UNLOADING LENGTH 120MM (4.72"), PARTS PICK-UP LENGTH 93MM (3.66"), ID TOOL 8MM (0.31"), ID TOOL LENGTH 60MM (2.36"), ID TAP M8 1.25, LIVE TOOL 60MM (2.36"), LIVE TAP M6, NUMBER OF TOOLS MAIN OD TOOL 16MM ( 0.63") 5, ID TOOL ER16 3 + ER20 1, LIVE TOOL 5 (ER20), LIVE TAP 1 (ER16), BACK OD TOOL 16MM ( 0.63") 2, ID TOOL 3 (ER16), LIVE TOOL 2 (ER16), MAIN SPINDLE LIVE TOOL SPINDLE RPM 200 TO 6000 R.P.M., MAIN SPINDLE THROUGH-HOLE DIAMETER 37MM (1.46"), MAIN SPINDLE INDEXING C-AXIS 0.001, MAIN SPINDLE INDEXING ANGLE 0.001, MAIN SPINDLE RPM 300 - 8000 R.P.M., TOOL RPM 200 - 6000 R.P.M., FEED RATE $1Z AXIS 15M / MIN., $1X AXIS 14M / MIN., $1Y AXIS 20M / MIN., $2Z AXIS 15M / MIN., $2X AXIS 15M / MIN., $2Y AXIS 15M / MIN., NC / MOTORS / OTHERS NC MITSUBISHI 65S, NC DISPLAY 10.4" COLOR TFT LCD, $1 MAIN SPINDLE MOTOR 2.2KW / 3.7KW BUILT-IN, $2 MAIN SPINDLE MOTOR 1.5KW / 2.2KW BUILT-IN, $1 ROTARY TOOL AXIS MOTOR 1.5KW, $2 ROTARY TOOL AXIS MOTOR 1.5KW, AXIS FEED MOTOR: Z1 1KW, AXIS FEED MOTOR: X1 1KW, AXIS FEED MOTOR: Y1 1KW: W/ BRAKE, AXIS FEED MOTOR: Z2 1KW, AXIS FEED MOTOR: X2 1KW, AXIS FEED MOTOR: Y2 1KW: W/ BRAKE, COOLANT PUMP MAIN 0.4KW + BACK 0.25KW, LUBRICANT PUMP 0.003KW (LUBRICANT SCARCITY FLOAT SWITCH), HYDRAULIC PUMP 0.75KW (TANK CAPACITY 10L, VG32), MAIN SPINDLE COOLING PUMP 0.075KW 2 (TANK CAPACITY 20L VG32), MAIN SPINDLE COOLING FAN 0.034KW 2 (RADIATOR FAN), DIMENSIONS / OTHERS MAIN SPINDLE HEIGHT 1000MM (39.37"), W + D + H 2280 1257 1825MM (89.76" 49.49" 71.85"), WEIGHT 2950KG (6504LBS), FLOOR SPACE REQUIREMENTS 2280 1175MM (90" 46"), TOTAL POWER CAPACITY 15KVA, EQUIPPED WITH, MAIN TOOL POST: 5 OD, 4 ID, 6 LIVE, BACK TOOL POST: 2 OD, 3 ID, 2 LIVE, EDGE PATRIOT 338 BAR FEEDER, MP SYSTEMS HIGH PRESSURE UNIT, TRI-MIST 850 G2 MIST COLLECTOR, MISC. TOOLING INCLUDED AS PICTURED, LNS CHIP CONVEYOR, FIRE TRACE FIRE SUPPRESSION SYSTEM, RAN OIL,

2013 DOOSAN HP4000 4-AXIS CNC HORIZONTAL MACHINING CENTER S/N: MH0004-000428, SPECIFICATIONS, PALLET SIZE (MILLIMETERS): 400, PALLET SIZE: 15.75" X 15.75", X-AXIS TRAVEL: 23.6", Y-AXIS TRAVEL: 22", Z-AXIS TRAVEL: 23.6", TOOL MAGAZINE CAPACITY: 40 ATC, SPINDLE SPEED: 14,000 RPM, SPINDLE TAPER: CAT 40, SPINDLE HP: 35, FEED RATE: 1187 IPM, TABLE LOAD MA: 882 LBS., CONTROL: FANUC 31IA, PALLET INDEXING: 1 DEGREE, CHIP REMOVAL: CHIP CONVEYOR, COOLANT: THROUGH-SPINDLE COOLANT, FANUC 31I-A CNC CONTROL, THRU-SPINDLE COOLANT, LNS TURBO HB CHIP CONVEYOR, EQUIPPED WITH, FANUC 31I-A CNC CONTROL, THRU-SPINDLE COOLANT, LNS TURBO HB CHIP CONVEYOR, 1 DEGREE INDEX, (2) 15.75" X 15.75" PALLETS, 40 POSITION TOOL CHANGER, 40 TAPER, 35 HP SPINDLE,

2018 BROTHER R450X1 TWIN PALLET HIGH SPEED DRILL TAP VERTICAL MACHINING CENTER S/N: 113242, SPECIFICATIONS, BROTHER SPEEDIO R450X1 (QUICK TURN TABLE), CNC VERTICAL MACHINING CENTER, SPECIFICATIONS (SUBJECT TO BUYER VERIFICATION):, TYPE0 DEG./180 DEG. TURNTABLE SYSTEM, TABLE DIMENSION 23.6 X 16.5 (ONE FACE), MAX. TURNING DIAMETER 40.2, MAX. JIG HEIGHT 11.8, TABLE WORK AREA SIZE 23.6 X 11.8 ONE FACE, MAX. LOADING CAPACITY 265 LBS., TABLE POSITION TIME 2.9S, X AXIS TRAVEL17.7, Y AXIS TRAVEL12.6, Z AXIS TRAVEL12, SPINDLE NOSE TO TABLE7.9 19.9, AUTOMATIC TOOL CHANGER22 STATIONS, SPINDLE TAPERBT30 TAPER, SPINDLE SPEED IN RPMS16,000 RPM, SPINDLE MOTOR6.5 HP (4.9 KW), CHANGE TIME (TOOL TO TOOL / CHIP TO CHIP).8 SEC / 1.6 SEC, FEEDRATE RAPID ON (X,Y,Z)1969 IPM, CUTTING FEEDRATE1181 IPM, EQUIPPED WITH (SUBJECT TO BUYER VERIFICATION):, CNC-C00 CNC CONTROL, 16K SPINDLE, 22 TOOLS, QUICK TURN TABLE (2-PALLET), CHIP CONVEYOR, TYPE 0 DEG./180 DEG. TURNTABLE SYSTEM, TABLE DIMENSION [MM (INCH)] 600 X 420 (23.6 X 16.5) (ONE FACE), MAX. TURNING DIAMETER [MM (INCH)] D1,020 (40.2) [D1,100 (43.3)]*1, MAX. JIG HEIGHT [MM (INCH)] 300(11.8) [350 (13.8)]*2, TABLE WORK AREA SIZE [MM (INCH)] 600 X 300 (23.6 X 11.8) (ONE FACE), MAX. LOADING CAPACITY [KG (LDS)] 120 (265) [200 (441)] (ONE FACE)*3, RATED TABLE LOAD INERTIA FOR TURNING AXIS [KGM2] 14.2 [23.5] (ONE FACE)*3, TABLE TURNING SYSTEM AC SERVO MOTOR (1KW) WORM GEAR (TOTAL SPEED REDUCTION RATIO:1/50), TABLE POSITION TIME 2.9S*4TD>, TABLE CHANGE REPEATABILITY [MM (INCH)] 0.01 (0.0004), (IN THE X,Y, AND Z AXES DIRECTIONS 270(10.6) FROM THE CENTER OF ROTATION), THE BROTHER R450X1 SPEEDIO IS A COMPACT AND VERSATILE CNC DRILL TAP MACHINING CENTER THAT OFFERS HIGH-SPEED AND HIGH-PRECISION CAPABILITIES. HERE ARE ITS KEY FEATURES: - HIGH-SPEED MACHINING: THE R450X1 IS DESIGNED FOR HIGH-SPEED MACHINING OPERATIONS, DELIVERING RAPID TRAVERSE RATES AND QUICK TOOL CHANGES TO MINIMIZE CYCLE TIMES AND MAXIMIZE PRODUCTIVITY. - CNC CONTROL SYSTEM: THE MACHINE IS EQUIPPED WITH A USER-FRIENDLY CNC CONTROL SYSTEM THAT OFFERS INTUITIVE PROGRAMMING AND OPERATION. IT PROVIDES ADVANCED FEATURES FOR OPTIMIZING CUTTING PARAMETERS AND MONITORING MACHINING PROCESSES. - HIGH-SPEED SPINDLE: THE MACHINING CENTER FEATURES A HIGH-SPEED SPINDLE CAPABLE OF DELIVERING FAST AND PRECISE CUTTING PERFORMANCE. THE SPINDLE ENABLES EFFICIENT DRILLING, TAPPING, AND MILLING OPERATIONS. - PRECISION AND ACCURACY: THE R450X1 ENSURES HIGH PRECISION AND ACCURACY IN MACHINING, THANKS TO ITS RIGID CONSTRUCTION AND ADVANCED MOTION CONTROL SYSTEMS. IT IS CAPABLE OF ACHIEVING TIGHT TOLERANCES AND MAINTAINING CONSISTENT QUALITY IN PARTS PRODUCTION. - VERSATILE MACHINING CAPABILITIES: THE MACHINE OFFERS VERSATILE MACHINING CAPABILITIES, INCLUDING DRILLING, TAPPING, MILLING, AND THREAD MILLING OPERATIONS. IT CAN HANDLE A WIDE RANGE OF MATERIALS, MAKING IT SUITABLE FOR VARIOUS INDUSTRIES AND APPLICATIONS. - TOOL MANAGEMENT SYSTEM: IT FEATURES A TOOL MANAGEMENT SYSTEM THAT ALLOWS FOR EFFICIENT TOOL STORAGE, TRACKING, AND SELECTION. THIS SIMPLIFIES TOOL SETUP AND ENSURES OPTIMAL TOOL UTILIZATION DURING MACHINING. - CHIP MANAGEMENT: THE MACHINING CENTER INCORPORATES EFFECTIVE CHIP MANAGEMENT SYSTEMS, SUCH AS CHIP CONVEYORS AND CHIP WASHERS, TO ENSURE EFFICIENT CHIP EVACUATION AND MAINTAIN A CLEAN WORK ENVIRONMENT. - CONNECTIVITY AND DATA MANAGEMENT: IT OFFERS CONNECTIVITY OPTIONS, SUCH AS USB AND ETHERNET PORTS, FOR EASY PROGRAM TRANSFER AND DATA MANAGEMENT. THIS ENABLES SEAMLESS INTEGRATION WITH EXTERNAL SYSTEMS AND SUPPORTS EFFICIENT PRODUCTION PLANNING. THE BROTHER R450X1 SPEEDIO CNC DRILL TAP MACHINING CENTER COMBINES COMPACT SIZE, HIGH-SPEED MACHINING CAPABILITIES, AND VERSATILE FUNCTIONALITY. IT IS WELL-SUITED FOR A RANGE OF APPLICATIONS, INCLUDING SMALL TO MEDIUM-SIZED PARTS PRODUCTION, AND IS PARTICULARLY BENEFICIAL IN HIGH-VOLUME MANUFACTURING ENVIRONMENTS WHERE SPEED AND EFFICIENCY ARE PARAMOUNT., EQUIPPED WITH, BROTHER COO CNC CONTROL, 12.1" COLOR LCD, USB PORT, ETHERNET FUNCTION, SPIN-TYPE HIGH SPEED TWO PALLET CHANGER, 16,000 RPM SPINDLE, 22 POSITION TURRET, COOLANT SYSTEM THRU SPINDLE, RIGID TAPPING

2016 HAAS DT-2 4-AXIS CNC DRILL/TAP MILL VERTICAL MACHINING CENTER S/N: 1135274, SPECIFICATIONS, TRAVELS S.A.E METRIC, X AXIS 28.0 IN 711 MM, Y AXIS 16.0 IN 406 MM, Z AXIS 15.5 IN 394 MM, SPINDLE NOSE TO TABLE (~ MAX) 21.5 IN 546 MM, SPINDLE NOSE TO TABLE (~ MIN) 6.0 IN 152 MM, SPINDLE S.A.E METRIC, MAX RATING 15.0 HP 11.2 KW, MAX SPEED 10000 RPM 10000 RPM, MAX TORQUE 46.0 FT-LB. @ 1700 RPM 62.0 NM @ 1700 RPM, DRIVE SYSTEM INLINE DIRECT-DRIVE INLINE DIRECT-DRIVE, TAPER BT30 BT30, BEARING LUBRICATION AIR / OIL INJECTION AIR / OIL INJECTION, COOLING AIR COOLED AIR COOLED, TABLE S.A.E METRIC, LENGTH 34.0 IN 864 MM, WIDTH 15.0 IN 381 MM, T-SLOT WIDTH 0.626 IN TO 0.630 IN 15.90 MM TO 16.00 MM, T-SLOT CENTER DISTANCE 4.92 IN 125 MM, NUMBER OF STD T-SLOTS 3 3, MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED) 250 LB. 113 KG, FEEDRATES S.A.E METRIC, MAX CUTTING 1200 IPM 30.5 M/MIN, RAPIDS ON X 2400 IPM 61.0 M/MIN, RAPIDS ON Y 2400 IPM 61.0 M/MIN, RAPIDS ON Z 2400 IPM 61.0 M/MIN, AXIS MOTORS S.A.E METRIC, MAX THRUST X 2550 LB. 11343 N, MAX THRUST Y 2550 LB. 11343 N, MAX THRUST Z 4200 LB. 18683 N, TOOL CHANGER S.A.E METRIC, TYPE SMTC , CAPACITY 20+1 20+1, MAX TOOL DIAMETER (FULL) 2.0 IN 51 MM, MAX TOOL LENGTH (FROM GAGE LINE) 7 IN 178 MM, CHIP-TO-CHIP (AVG) 1.6 S 1.6 S, TAPPING S.A.E METRIC, MAX TAPPING SPEED 5000 RPM 5000 RPM, GENERAL S.A.E METRIC, COOLANT CAPACITY 55 GAL 208 L, AIR REQUIREMENTS S.A.E METRIC, AIR REQUIRED 4 SCFM @ 100 PSI 113 L/MIN @ 6.9 BAR, INLINE AIR HOSE 3/8 IN 3/8 IN, COUPLER (AIR) 3/8 IN 3/8 IN, AIR PRESSURE MIN 80 PSI 5.5 BAR, DIMENSIONS - SHIPPING S.A.E METRIC, DOMESTIC PALLET 100 IN X 91 IN X 99 IN 254 CM X 231 CM X 251 CM, EXPORT PALLET 100 IN X 91 IN X 99 IN 254 CM X 231 CM X 251 CM, WEIGHT 5350 LB. 2427.0 KG, ELECTRICAL SPECIFICATION S.A.E METRIC, DRIVE SYSTEM INLINE DIRECT-DRIVE INLINE DIRECT-DRIVE, SPINDLE POWER 15.0 HP 11.2 KW, INPUT AC VOLTAGE (3 PHASE) - LOW 220 VAC 220 VAC, FULL LOAD AMPS (3 PHASE) - LOW 40 A 40 A, INPUT AC VOLTAGE (3 PHASE) - HIGH* 440 VAC 440 VAC, FULL LOAD AMPS (3 PHASE) - HIGH* 20 A 20 A, EQUIPPED WITH, HAAS CNC CONTROL, 20 POSITION TOOL CHANGER, 15,000 RPM SPINDLE, COOLANT SYSTEM, 4TH AXIS ROTARY TABLE, WIPS TOOL SETTER, NO SPINDLE PROBE, PCOOL,, REMOTE JOG HANDLE,, HIGH SPEED MACHINING, RIGID TAP,, ETHERNET, CHIP AUGER, MFG 12/2016, DELIVERED NEW IN 2017

2020 STIERLI-BIEGER 420CNC HORIZONTAL BENDING MACHINE S/N: 443. 46 TON STIERLI-BIEGER MODEL 420 CNC HORIZONTAL BENDING MACHINE, FOR BENDING AND STRAIGHTENING. THE STIERLI-BIEGER 420 CNC IS A VERY EFFICIENT SYSTEM THAT IS EQUIPPED WITH A MODERN TOUCHSCREEN COLOR DISPLAY AND 2-AXIS CONTROL. THE OPERATOR CAN PROGRAM THE SYSTEM VERY EASILY. THE BENDING ANGLES REQUIRED CAN BE PROGRAMMED AND ADJUSTED AFTER THE FIRST ANGLE. 200 PROGRAMS CAN BE SAVED. OTHER PROGRAMS CAN BE SWAPPED IN VIA AN INTERFACE. THE STROKE SETTING CAN BE ADJUSTED IN THE PROGRAM AT ANY TIME IN +/- 0.1 STEPS TO OFFSET MATERIAL-RELATED TOLERANCES. IT IS OPERATED WITH THE FOOT SWITCH OR THE SPECIAL MANUAL CONTROL CABLE, WITH WHICH JOGGING MODE, AUTOMATIC MODE AND THE STRAIGHTENING FUNCTION CAN BE ACTUATED. THE 200 MM TOOL HOLDER AND THE STRONG PIN WITH A DIAMETER OF 80 MM ENABLES VERSATILE USE AND EASY FITTING OF SIMPLE TOOLS. THE CENTRAL BENDING PIN HOLDER IS REINFORCED BY A HARDENED STEEL BUSHING. THREE FURTHER HOLES ARE FOR THE PLUG-IN PINS OF THE PIPE BENDING OR STRAIGHTENING TOOLS. TOOLS EQUIPPED WITH THE QUICK-CHANGE HOLDER ARE USED FOR BENDING. THE VERY LARGE WORKING PLATE ENSURES EFFECTIVE POSITIONING OF VERY LARGE BENT PARTS. THE SPECIAL OIL-LUBRICATED GUIDED CYLINDER REQUIRES NO MAINTENANCE AND NO OPEN GUIDE! THE MACHINE CAN BE TRANSPORTED EASILY INSIDE THE FACTORY WITH A CRANE OR PALLET TRUCK. TWO TOOL TRAYS PROVIDE ORGANIZED STORAGE OF THE TOOLS SO THAT THEY ARE ALWAYS TO HAND. EQUIPPED WITH SIEMENS CNC CONTROL, 2 METER BACK GAUGE.

2012 HAAS ST-20 CNC LATHE, SPECIFICATIONS: SWING 31.75", MACHINING LENGTH 20.5", CHUCK SIZE 8", BAR CAPACITY 2", POWER 20 HP, MAX RPM 4,000, TURNING DIA 15", TAILSTOCK YES, EQUIPPED WITH: CHIP CONVEYOR, COOLANT SYSTEM, 8" 3-JAW CHUCK, RIGID TAPPING, TOOL SETTER S/N: 3094329

2017 DATRON M7HP CNC HIGH SPEED MILLING AND ENGRAVING MACHINE 23.6" X 23.6" TABLE 8" GANTRY CLEARANCE 520 MM (20.4") X AXIS TRAVERSE PATH 650 MM (25.6") Y AXIS TRAVERSE PATH 240 MM (9.4") Z AXIS STROKE 8 MPM (25 FPM) POSITIONING SPEED FOR X, Y AND Z AXES 264 POUND MAXIMUM TABLE LOAD MILLING HEAD 0.8 HP 6 MM COLLET MICROJET COOLING SYSTEM TWO (2) SPRAY NOZZLES Z AXIS SURFACE HEIGHT SENSING PROBE FIFTEEN (15) POSITION TOOL CHANGER TOOL LENGTH SENSOR THREE (3) AXIS CONTROL DIGITAL SERVO DRIVES SOUND ENCLOSURE BUSCH VACUUM PUMP 5 HP CONTROLLER WINDOWS OPERATING SYSTEM STANDARD KEYBOARD AND MOUSE 19" FLAT SCREEN DISPLAY NETWORK CONNECTION CNC V. 9 CONTROL SYSTEM 3D CNC CONTROL SOFTWARE REMOTE CONTROL PENDANT ACCESSORIES AS SHOWN IN PHOTOS MANUALS

2015 AXYZ PACER 4012 ATC CNC ROUTER SPECIFICATIONS: TABLE W 60" TABLE L 144", X 60", Y 144", 10.8 HP SPINDLE, MISTER, AUTO SQUARING, HC PRESSURE FOOT, COLD GUN, AUTOMATIC TOOL CHANGER, BUSCH MINKE 1252 VACUUM PUMP. S/N: 5390-5280

2015 CITIZEN L20E-2M8 CNC SWISS TYPE AUTOMATIC LATHE S/N: QF5120, SPECIFICATIONS, SPINDLE CAPABILITY, MAXIMUM TURNING DIAMETER 20 MM, MAXIMUM TURNING LENGTH 200MM, SPINDLE SPEED 10000RPM, SPINDLE MAXIMUM DRILLING DIAMETER 10MM, SPINDLE MAXIMUM SCREW ELEVATIONAL DIAMETER M8, SUB SPINDLE, BACK UP GRASPING DIAMETER 20 MM IN DIAMETER, UP TO THE DRILLING DIAMETER 8MM REAR, BACK UP SCREW STANDING DIAMETER M6, REAR SPINDLE ROTATION SPEED 8000RPM, 21 TOOL MOUNTING NUMBER, 5 CROSS ROTATION FOR TURNING 6 (3 CROSS, END FACE DRILLING SPINDLE), 6 FRONT HOLE DRILLING [GDF1207 (3 VERTICAL SLEEVE HOLDER), U120B (FRONT 3 AXIS HOLDER), 4 HOLE DRILLING ON BACK (4 AXIS HOLDER ON BACK), 2.2 / 3.7KW FOR MOTOR SPINDLE (CONTINUOUS / 15 MINUTES), 0.75 / 1.5KW FOR REAR SPINDLE (CONTINUOUS / 15 MINUTES), REQUIRED POWER SOURCE, RATED POWER CONSUMPTION 7.3KVA, MACHINE SIZE, BODY: WIDTH 2120 DEPTH 1220 HEIGHT 1835MM, WEIGHT: 2350KG, EQUIPPED WITH, EDGE MINUTEMAN 320 SE BARFEED, HIGH PRESSURE COOLANT, MELDAS CONTROL, TOOLING PICTURED INCLUDED, PART CONVEYOR,

2012 FMB TURBO 3-36 12FT BAR FEEDER - BAR LENGTH 1) 3800 MM BAR DIAMETER 3 - 38 MM LOADING CAPACITY 230 MM REMNANT PIECE LENGTH (MAX) 450 MM 20MM CHANNELS AND PUSHER INTERFACED WITH STAR

1999 TRIPET 202BC SUPER PRECISION I.D. & O.D. CNC GRINDER S/N: E-T202C601, SPECIFICATIONS, MAX. SWING 24", MAX. GRINDING LENGTH 36", B-AXIS MOVEMENT (MANUAL) 3 DEG UP TO 10 DEG, WORKHEAD BORE 6", INTERNAL GRINDING UNIT, Z-AXIS TRAVEL 27.55", X-AXIS TRAVEL 13.77", T-AXIS AUTOMATIC TURRET FOR 2 SPINDLES 5.9" DIAMETER, EXTERNAL GRINDING UNIT, R-AXIS TRAVEL 27.55", P-AXIS TRAVEL 13.77", TRAVEL SPEED RANGE 0-590 IPM, WHEEL HEADSTOCK MOTOR 20 HP, WHEEL DIAMETER X THICKNESS X BORE 30"X2.24"X11.99", CAN GRIND OD & ID SIMULTANEOUSLY, MACHINE WEIGHT (APPROX.) 24,200 LBS., EQUIPPED WITH, FANUC CNC TOUCH SCREEN SYSTEM INSTALLED 2007, HTT HAUSSER TRIPET TSSCHUDIN AG TYPE T202 C601, CREEP FEED ON BOTH HEADS, SWING DOWN DRESSER, MARPOSSE PROBE, WHEEL COOLANT, DRESSER COOLANT, CHUCK COOLANT, FANUC TOUCH SCREEN CONTROL, HAND PULSATOR PENDANT, MODEL SB4500 SBS WHEEL BALANCE SYSTEM, WHEEL AUTO DRESS, TURMOIL MODEL OC-300 IL PAPER FILTRATION SYSTEM, CHILLER FANUC TOUCH SCREEN CNC CONTROL, FILTRATION SYSTEM, PROBE MEASURING SYSTEM, CREEP FEED AUTO WHEEL BALANCING, ID SPINDLE INTERCHANGEABLE W/LIVE CENTER FOR HD OD GRINDING

2006 ELUMATEC SBZ-122/30 CNC PROFILE MACHINING CENTER/ROUTER S/N: 12230300088, SPECIFICATIONS, STANDARD TABLE AREA 137.7", TABLE CAPACITY, X-AXIS ROUTING CAPACITY FACE SIDE 137.7", TABLE CAPACITY, Y-AXIS 13.75", ROUTING CAPACITY TOP 9", ROUTING CAPACITY FRONT 7", TABLE CAPACITY Z-AXIS 11", ROUTING CAPACITY TOP 11", STEP OVER CAPACITY 7.3", RAPID POSITIONING Y-Z AXES (MAX.) 1,176"/MIN, RAPID POSITIONING X-AXES (MAX.) 1,968"/MIN, MAX. SPINDLE SPEED 21,000 RPM, POWER OUTPUT, ROUTER SPINDLE 8.1 HP,480 VOLT, 3, PHASE, MAX. PROFILE HEIGHT/STE OVER MAX. 11", SOFTWARE FORCED FRONT/REAR MACHINING NO STEP OVER FROM FRONT TO REAR OF PROFILE, HEAD RUNS AROUND ZERO POINT., MAX. DIAMETER OF TOOLING 2.4", MAX. DIAMETER OF DISK CUTTER, MANUAL 7.87", AUTOMATIC 3.62", MAX. AIR PRESSURE 102 PSI, MAX. LENGTH OF TOOLING (TOP) 7.9", MAX. DIA. SHAFT FOR ER-32 COLLET .78", MAX. DIA. SHAFT FOR ER-16 COLLET (ANGLE HEAD CAP COLLET) .511", MAX. DIA. SHAFT FOR 077 COLLET .394", TAPPING CAPACITY UP TO (W/FLOAT COLLET -ER32 COLLET SIZE) 0.375" @ 65% THREAD, TOOL CHUCK HSK F63, TOOL HOLDER FOR AUTO TOOL CHANGE 4, OVERALL MACHINE BASE DIMENSIONS 62" X49.5", LIGHT CURTAIN WIDTH 181.3"L X 88"H, MACHINE WEIGHT (APPROX.) 3,605 LBS., EQUIPPED WITH, PC BASED CONTROL E550 CONTROL, ELUSOFT SOFTWARE, MACHINING 3 SIDES OF PROFILE, LINEAR GUIDE FOR X Y Z TRAVEL, PROFILE IS HELD BY ADJUSTABLE PNEUMATIC CLAMPS, (2) AUTOMATIC TOOL CHANGERS W/4 TOP TOOL HOLDERS & 1 ANGLE HEAD HOLDER EACH, HORIZONTAL PNEUMATIC CLAMPS, PULSE SPRAY MIST COOLANT SYSTEM, TOOL HEIGHT GUAGE, (1) ANGLE HEAD TOOL HOLDER INCLUDED,

2016 ITALMAC NOVA 600P-4000 CNC DOUBLE CUT MITRE SAW S/N: 456090, SPECIFICATIONS, WITH AUTOMATIC RIGHT HEAD MOVABLE BY NUMERIC CONTROL. EXTERNAL PNEUMATIC TILTING OF BOTH HEADS TO 90, 45, 2230 WITH MECHANICAL STOPS FOR INTERMEDIATE DEGREES. SAWBLADE DIAM. 600 MM AVAILABLE WITH MAXIMUM CUTTING LENGTH OF 4 METERS, N. 2 SAW BLADES DIAM. 600 MM., USB PORT., PNEUMATIC VERTICAL AND HORIZONTAL CLAMPS., PROTECTION OF THE BLADES., MOVABLE SIDE PROFILE SUPPORT ROLLER CONVEYOR., SOFTWARE SINGLE CUT, MINIMUM CUT, OVERSIZE CUT AND STEP-BY-STEP CUTS., NOVA 600-P: WITH INDUSTRIAL PC, 17 LED COLOR SCREEN., 3-AXIS CONTROLLED DOUBLE MITRE SAW CUTTING-OFF MACHINE, AUTOMATIC TRAVERSING OF THE MOVING CUTTING HEAD ON SLIDE WAYS AND ROLLER PACKS. INTERNAL AND EXTERNAL TILTING OF BOTH HEADS. ANY ANGLE BETWEEN 45 (INTERNAL) AND 2230 (EXTERNAL) CAN BE ELECTRONICALLY SET. SAWBLADE DIAM. 600 MM AVAILABLE WITH MAXIMUM CUTTING LENGTH OF 4 METERS, EQUIPMENT:, N. 2 CARBIDE-TIPPED (WIDIA) SAW BLADES DIAM. 600 MM., USB PORT., PAIR OF PNEUMATIC HORIZONTAL AND VERTICAL CLAMPS WITH LOW PRESSURE DEVICE., FULL GUARD FOR CUTTING UNIT, PNEUMATICALLY OPERATED., MOVABLE SIDE PROFILE SUPPORT ROLLER CONVEYOR., PROVISION FOR SWARF EXHAUSTER., SOFTWARE FOR STEP-BY-STEP CUTS WITH CLAMP FOR AUTOMATIC CUTTING SYSTEM., SOFTWARE FOR SINGLE CUTS, MINIMUM CUT, OVERSIZE CUTS., AIR GUN, SERVICE SPANNERS., CHIPS CONVEYOR PLATE., PROVISION FOR CONNECTION TO AN INDUSTRIAL PRINTER TO ENABLE PROFILE IDENTIFICATION.

TOOLHURST 40 CENTER SLUNG CHIP SPINNER WITH TWO SPINNERS, 3 BASKETS, S/N T-17050, SPECIFICATIONS, SIZE-BASKET DIAMETER 40", CAPACITY-CUBIC FEET 14.8, RPM OF BASKET 700, HEIGHT FROM FLOOR TO TOP OF CASE RING 40-1/8", FLOOR SPACE 64-5/8" X 92-3/8", APPROXIMATE WEIGHT 5,800 LBS., MAXIMUM LOAD 1,100 LBS., MINIMUM DUTY CYCLE, ACCELERATE LOADED BASKET TO FULL SPEED 90 SECONDS, MINIMUM FULL SPEED RUNNING TIME 290 SECONDS, MINIMUM BRAKING TIME 30 SECONDS, LOAD AND UNLOAD 90 SECONDS, TOTAL CYCLE TIME 30 SECONDS, LOADS PER HOUR-ONE BASKET 4 TO 6, LOADS PER HOUR-TWO BASKET 6 TO 7, MOTOR SPECIFICATIONS, 5 HP MAIN DRIVE MOTOR, 1750 RPM, 220/440 VOLT, EQUIPPED WITH, (2) 40" CHIP SPINNERS (1 TOLHURST AND 1 WESTERN ELECTRIC), (3) BASKETS, (1) BASKET COVER, (1) LIFTING YOLK,

2013 YUKIWA JNC 170L 8" 4TH AXIS CNC ROTARY TABLE (2) 8" 4TH AXIS YUKIWA JNC 170L CNC ROTARY TABLE COMPATIBLE WITH BROTHER CNC DRILL TAP CENTERS, 3-JAW CHUCK WITH ACCUATOR, TAILSTOCK. THIS LOT INCLUDES (2) YUKIWA ROTARIES AND (2) DRIVES JNC SERIES. LIGHT WEIGHT COMPACT SUITABLE FOR SMALL-SIZED MACHINING CENTERS. ACCURATE INDEXING. ACCURATE INDEXING IS AVAILABLE BY DURABLE WORM WHEEL OF SPECIAL ALLOY. OUTSTANDING WATER PROTECTION. AUTO-AIR PURGING SYSTEM (PAT.) IS BUILT IN AS STANDARD AND EFFECTS AGAINST COOLANT OUTSTANDINGLY. EASY JIG DESIGNING. EASY MAINTENANCE. UNIT:MM. MODEL: RIGHT HANDED JNC140R JNC170R JNC200R JNC250R, LEFT HANDED JNC140L JNC170L JNC200L JNC250L. TABLE DIAMETER: 140 170 200 250. CENTER HEIGHT: 110 135 160 200. TABLE FAUCET DIAMETER: 40H7 DEPTH 10 60H7 DEPTH 10 70H7 DEPTH 10 90H7 DEPTH 10. TABLE CENTER THROUGH HOLE DIAMETER: 28 45 56 72. CLAMP SYSTEM: AIR PRESSURE (0.5 ~ 0.7MPA). CLAMP TORQUE (NM): 120 (0.5MPA) 230 (0.5MPA) 450 (0.5MPA) 650 (0.5MPA). INDEXING ACCURACY (CUMULATIVE): WITHIN 40 SECONDS WITHIN 30 SECONDS. ALLOWABLE OPERATION LOAD (N): VERTICAL LOAD 4,000 5,000 7,000 8,000, HORIZONTAL LOAD 2,000 3,000 4,000 5,000, CIRCUMFERENTIAL LOAD 2,000 1,700 2,600 3,500. ALLOWABLE INERTIA MOMENT (KGM2): DURING VERTICAL USE 0.25 0.5 1.0 2.0, DURING HORIZONTAL USE 0.125 0.25 0.5 1.0. TOTAL REDUCTION RATIO: 1/72 1/90 1/90 1/90. MAXIMUM ROTATION (MIN-1): 41.6 33.3 33.3 33.3. GUIDE PIECE WIDTH: 14H7 14H7 18H7 18H7. WEIGHT (KG): 27 38 58 86. ELECTRONIC SERVO DRIVE. 3-JAW CHUCK WITH ACCUATOR. TAILSTOCK. *REMOVED FROM 2013 BROTHER TC-S2DN MACHINES WITH CNC-B00 CONTROLS

1989 SUNNEN MBC-1803 HORIZONTAL HONE, S/N: 89314 SPECIFICATIONS, DIAMETER CAPACITY MIN., MANUAL STROKE: 0.060", DIAMETER CAPACITY MAX., MANUAL STROKE: 6.5", DIAMETER CAPACITY MIN, POWER STROKE: 0.060", DIAMETER CAPACITY MAX., POWER STROKE: 3.75", WORK LENGTH MAXIMUM, BLIND BORES: 16", WORK LENGTH MAXIMUM, OPEN END BORE: 10", SPINDLE SPEEDS, RANGE: 200 TO 2500 RPM, STROKE RATES, RANGE: 80 TO 310 SPM, MACHINE DIMENSIONS 49"X72"X67"H, WEIGHT (APPROX.): 1160 LBS., MOTOR SPECIFICATIONS:, 1 HP AC SPINDLE MOTOR, 1/2 HP AC HYDRAULIC SYSTEM MOTOR, 1/2 HP AC POWER STROKER MOTOR, EQUIPPED WITH, POWER STROKING, PUSH BUTTON CONTROLS, MISC. TOOLING,

BGK CARLISLE IR-14-08-10-PT GAS CATALYTIC IR OVEN 14'W X 8'T X 10' D VOLTAGE: 480VAC, 3 PHASE RATED KVA: 28.8KW/52.5A SHORT CIRCUIT CURRENT MAX: 5,000A LARGEST MOTOR: 3HP SCHEM/JOB NO.:115175/38824

GENIE IWP-24 ELECTRIC PLATFORM LIFT 24-FEET PLATFORM HEIGHT; BATTERY-POWERED WITH ONBOARD CHARGER; MAX LOAD: 350 LBS., *NEW BATTERY 5/2024, S/N: 4095-2684

8 INDUSTRIAL CABINETS. (CONTENTS NOT INCLUDED) NUMBER OF DRAWERS IN EACH CABINET: 9-12 HEIGHTS RANGE FROM: 50"-60" WIDTHS RANGE FROM: 28"-41" DEPTH: 28"

2014 FANUC ROBODRILL ALPHA21LIA5 CNC DRILL TAP VERTICAL MACHINING CENTER W/PALLET CHANGER S/N: 145YH246, SPECIFICATIONS, FANUC ROBODRILL, OEM: FANUC LTD. (MADE IN JAPAN), DATE OF MANUFACTURE: MAY 2014, MODEL: -D21LIA5, TYPE: A04B-0102-B113 #BBH, SERIAL NO.: 145YH246, ELECTRICS: 200-220 VOLT; 3 PHASE; 50-60 CYCLE; 11 KVA, FEATURES AND SPECIFICATIONS, ...CNC CONTROL: FANUC SERIES 31I-MODEL B5, ...TABLE SIZE: 33.5" X 16.1", ...TABLE CAPACITY: 661 LBS., ...TRAVELS:, ......X-AXIS: 27.5", ......Y-AXIS: 15.75", ......Z-AXIS: 12.99", ...SPINDLE SPECIFICATIONS:, ......SPEED: 10,000 RPM, ......TAPER: BT-30, ...TOOL CHANGER CAPACITY: 21 SLOTS, ...RAPID TRAVERSE RATE: 2,125 IPM, ...TOOL CHANGE TIME (RANGE): 0.9 - 1.6 SECONDS, ...ELECTRICAL TRANSFORMER, ...A-B PALLET SHUTTLE UNIT, ...COOLANT SYSTEM W/ CHIP CONVEYOR, ROBODRILL DIMENSIONS (APPROX.): 110" X 80" X 96", OVERALL EQUIPMENT WEIGHT (APPROX.): 6,000 LBS.

2018 SMEC SAMSUNG MCV-4300 3-AXIS CNC VERTICAL MACHINING CENTER S/N: 18J200123, SPECIFICATIONS, DISTA TRAVEL X/Y/Z 30.31 X 16.92 X 20.08 RAPID TRAVERSE(X/Z) 1,417/1,417/1,181, DISTANCE FROM TABLE TOP TO SPINDLE NOSE 5.91 - 25.98 TOOL SHANK CAT40, WORKING SURFACE - TABLE SIZE 18.11 X 36.22 TOOL CHANGING TIME(T-T) 1.3, LOADING CAPACITY 1102 MAGAZINE CAPACITY 30, DISTANCE FROM COLUMN TO SPINDLE CENTER 22.83 REQUIRED FLOOR SPACE 118.1 X 93.3 X 104.1, SPINDLE SPEED 12000 MACHINE WEIGHT 12125, SPINDLE MOTOR(30MIN/CONT.) 25/15 CONTROLLER FANUC 0I-MF+, MAX SPINDLE TORQUE 87, EQUIPPED WITH, FANUC OI-MF+ CONTROL, 12,000 RPM SPINDLE, 30 POSITION AUTOMATIC TOOL CHANGER, RENISHAW PROBE, COOLANT THRU SPINDLE, CHIP CONVEYOR, TOOLING AND TOOL CART

2012 BROTHER TC-R2B CNC DRILL TAP VERTICAL MACHINING CENTER S/N: 111878, SPECIFICATIONS, X 16.5, Y 12.6, Z 12, 10,000 RPM, #ATC 14, TAPER 7/24 #30, CONTROL CNC (CNC-BOO), TABLE SIZE: 23.6" X 16.5" (EACH SIDE), TABLE CAPACITY: 256 LBS. (ONE SIDE), TABLE POSITION TIME: 2.9 S/180 DEG., X-AXIS TRAVEL: 16.5", Y-AXIS TRAVEL: 12.8", Z-AXIS TRAVEL: 12", X-AXIS RAPID FEEDRATE: 1969 IPM, Y-AXIS RAPID FEEDRATE: 1969 IPM, Z-AXIS RAPID FEEDRATE: 1969 IPM, CUTTING RATE: 394 (X, Y) 787 (Z), SPINDLE SPEED: 10,000 IPM, SPINDLE TAPER: 30, MAIN MOTOR: 15 HP, TRAVEL DISTANCE, X-AXIS 420MM, Y-AXIS 320MM, Z-AXIS 305MM, DISTANCE FROM TABLETOP SURFACE TO SPINDLE AND FACE, TABLE WORK AREA 200-505MM 8-20, WORK AREA SIZE 600 X 300 23.6 X 11.8, MAX. LOAD WEIGHT (UNIFORM LOAD) 120 KG., SPINDLE SPEED (MIN) 10-10,000, SPINDLE SPEED WHEN TAPPING (MIN) 6,000 MAX., SPINDLE TAPER HOLE 7/24 TAPER NO.30, FEED RATE, RAPID TRAVERSE RATE (M/MIN) 50X50X50 M/MIN, CUTTING FEED RATE (M/MIN) 1-10,000 MM/MIN, Z AXIS 1-20,000 RPM, ATC, TOOL SHANK TYPE MAS.BT30, PULL STUD TYPE MAS.P30T-2, TOOL STORAGE CAPACITY (PCS) 14, MAX. TOOL LENGTH 200MM, DISTANCE FROM TAPER GAUGE/MAX. DIAMETER 30-150/D80 MM, 160-200/D40 MM, MAX. TOOL WEIGHT (TOTAL WEIGHT 25) 3.0 KG., TOOL SELECTION METHOD RANDOM SHORT CUT, TOOL CHANGE TIME, TOOL TO TOOL .09, CHIP TO CHIP 1.7, MOTOR, SPINDLE MOTOR (CONTINUOUS FOR 30 MIN.) 10.1/6,7, FEED AXIS MOTOR 1.0 KW XY 1-5 KW, MACHINE DIMENSIONS, HEIGHT 2,588MM, INSTALLATION ARE 1,617 X 2,658 MM, (WHEN CONTROL BOX IS OPEN) 1,456 X 2,644 MM, WEIGHT (INCLUDING BOX AND SPLASH GUARD) 2600 KG, EQUIPPED WITH, EQUIPPED WITH, CNC-BOO CNC CONTROL, 14 POSITION TURRET, 180-DEGREE PALLET CHANGER, CHIP CONVEYOR, COOLANT SYSTEM

2014 BROTHER TC-S2D 3-AXIS CNC DRILL TAP VERTICAL MACHINING CENTER, S/N: 222804, SPECIFICATIONS, X-AXIS TRAVEL 19.7", Y-AXIS TRAVEL 15.7", Z-AXIS TRAVEL 11.8", DISTANCE BETWEEN TABLE TOP AND SPINDLE 7.1" TO 18.9", WORK AREA SIZE 23.6" X 15.7", MAX. TABLE LOAD CAPACITY 551 LBS., SPINDLE SPEEDS 10 TO 10,000 RPM, SPEED DURING TAPPING 6,000 RPM, SPINDLE TAPER BT-30, SPINDLE MOTOR 14 HP, TOOL STORAGE CAPACITY 14, CUTTING FEED RATE (X,Y) 04 TO 394 IPM, CUTTING FEED RATE (Z) 0.4-7.87 IPM, RAPID TRAVERSE RATE 1969 IPM, FLOOR 81"X 87" X 112"H, MACHINE WEIGHT 5,300 LBS., EQUIPPED WITH, CNC B00 CONTROLS, MISC. TOOL HOLDERS, COOLANT SYSTEM, 10,000 RPM SPINDLE, 14 POSITION ATC, *4TH AXIS DRIVE AND ROTARY CAN BE ADDED FOR AN ADDITIONAL COST,

2012 BROTHER TC-R2B CNC DRILL TAP VERTICAL MACHINING CENTER, S/N: 111952, SPECIFICATIONS, TABLE SIZE: 23.6" X 16.5" (EACH SIDE), TABLE CAPACITY: 256 LBS. (ONE SIDE), TABLE POSITION TIME: 2.9 S/180 DEG., X-AXIS TRAVEL: 16.5", Y-AXIS TRAVEL: 12.8", Z-AXIS TRAVEL: 12", X-AXIS RAPID FEEDRATE: 1969 IPM, Y-AXIS RAPID FEEDRATE: 1969 IPM, Z-AXIS RAPID FEEDRATE: 1969 IPM, CUTTING RATE: 394 (X, Y) 787 (Z), SPINDLE SPEED: 10,000 IPM, SPINDLE TAPER: 30, MAIN MOTOR: 15 HP, EQUIPPED WITH, CNC-BOO CNC CONTROL, 14 POSITION TURRET, 180-DEGREE PALLET CHANGER, COOLANT SYSTEM, 10,000 RPM SPINDLE,

2018 HWACHEON VESTA 1000+ CNC 3-AXIS VERTICAL MACHINING CENTER, SPECIFICATIONS, SPINDLE SPEED: 12,000 RPM, TABLE / PALLET SIZE: 43.31" X 19.69", SPINDLE MOTOR: 25 HP, X-TRAVEL: 39.37 INCHES, TOOL MAGAZINE CAPACITY: 30, Y-TRAVEL: 21.65 INCHES, MAX TOOL DIAMETER: 5.91 INCHES, Z-TRAVEL: 19.69 INCHES, MAX TOOL LENGTH: 11.81 INCHES, CUTTING FEED RATE: 945 IPM, MAX TOOL WEIGHT: 17.64 INCHES, SPINDLE TAPER TYPE: BT#40, MAX TABLE/PALLET LOAD: 1,543 LBS., EQUIPPED WITH, CONTROL MAKE/MODEL: FANUC OI-MF, RENISHAW PROBE SYSTEM (MISSING PROBE), 12,000 RPM SPINDLE, 30 POSITION TOOL CHANGER, COOLANT SYSTEM, 4TH AXIS READY, COOLANT THRU SPINDLE, HIGH PRESSURE COOLANT, AIR DRYER S/N: 13169

2010 BROTHER TC-R2B CNC DRILL TAP VERTICAL MACHINING CENTER S/N: 111215, SPECIFICATIONS, TABLE SIZE: 23.6" X 16.5" (EACH SIDE), TABLE CAPACITY: 256 LBS. (ONE SIDE), TABLE POSITION TIME: 2.9 S/180 DEG., X-AXIS TRAVEL: 16.5", Y-AXIS TRAVEL: 12.8", Z-AXIS TRAVEL: 12", X-AXIS RAPID FEEDRATE: 1969 IPM, Y-AXIS RAPID FEEDRATE: 1969 IPM, Z-AXIS RAPID FEEDRATE: 1969 IPM, CUTTING RATE: 394 (X, Y) 787 (Z), SPINDLE SPEED: 10,000 IPM, SPINDLE TAPER: 30, MAIN MOTOR: 15 HP, TRAVEL DISTANCE, X-AXIS 420MM, Y-AXIS 320MM, Z-AXIS 305MM, DISTANCE FROM TABLE TOP SURFACE TO SPINDLE AND FACE, TABLE WORK AREA 200-505MM 8-20, WORK AREA SIZE 600 X 300 23.6 X 11.8, MAX. LOAD WEIGHT (UNIFORM LOAD) 120 KG., SPINDLE SPEED (MIN) 10-10,000, SPINDLE SPEED WHEN TAPPING (MIN) 6,000 MAX., SPINDLE TAPER HOLE 7/24 TAPER NO.30, FEED RATE, RAPID TRAVERSE RATE (M/MIN) 50X50X50 M/MIN, CUTTING FEED RATE (M/MIN) 1-10,000 MM/MIN, Z AXIS 1-20,000 RPM, ATC, TOOL SHANK TYPE MAS.BT30, PULL STUD TYPE MAS.P30T-2, TOOL STORAGE CAPACITY (PCS) 14, MAX. TOOL LENGTH 200MM, DISTANCE FROM TAPER GAUGE/MAX. DIAMETER 30-150/D80 MM, 160-200/D40 MM, MAX. TOOL WEIGHT (TOTAL WEIGHT 25) 3.0 KG., TOOL SELECTION METHOD RANDOM SHORT CUT, TOOL CHANGE TIME, TOOL TO TOOL .09, CHIP TO CHIP 1.7, MOTOR, SPINDLE MOTOR (CONTINUOUS FOR 30 MIN.) 10.1/6,7, FEED AXIS MOTOR 1.0 KW XY 1-5 KW Z, (CONT.), MACHINE DIMENSIONS, HEIGHT 2,588MM, INSTALLATION ARE 1,617 X 2,658 MM, (WHEN CONTROL BOX IS OPEN) 1,456 X 2,644 MM, WEIGHT (INCLUDING BOX AND SPLASH GUARD) 2600 KG, EQUIPPED WITH, EQUIPPED WITH, CNC-BOO CNC CONTROL, 14 POSITION TURRET, 180-DEGREE PALLET CHANGER, CHIP CONVEYOR, COOLANT SYSTEM, TWO NIKKEN CNC 180 4TH AXIS CNC ROTARY TABLES

2013 HAAS VF3 CNC PRECISION VERTICAL MACHINING CENTER S/N: 1107444, SPECIFICATIONS, TRAVELS:, X AXIS 40", Y AXIS 20", Z AXIS 25", SPINDLE NOSE TO TABLE (MAX) 29.5", SPINDLE NOSE TO TABLE (MIN) 4.5", TABLE:, LENGTH 54", WIDTH 25", T-SLOT WIDTH 5/8", T-SLOT CENTER DISTANCE 3.15", NUMBER OF STD T-SLOTS 5, MAX. WEIGHT ON TABLE (EVENLY DISTRIBUTED) 3500 LBS., SPINDLE:, MAX RATING 30 HP, MAX SPEED 8,100 RPM, MAX TORQUE 90FT-LB @ 2000 RPM, DRIVE SYSTEM INLINE DIRECT-DRIVE, MAX. TORQUE W/OPT GEARBOX 250FT-LB @ 450 RPM, TAPER CT40, BEARING LUBRICATION AIR/OIL INJECTION, COOLING LIQUID COOLED, FEEDRATES:, RAPIDS ON X, Y & Z 710 IN/MIN, MAX. CUTTING 500 IN/MIN, AXIS MOTORS:, MAX. THRUST X & Y 2550 LB., MAX. THRUST Z 4200 LB., TOOL CHANGER::, TYPE CAROUSEL (SMTC OPT), CAPACITY 20, MAX. TOOL DIAMETER (FULL) 3.5", MAX TOOL WEIGHT 12 LB., TOOL TO TOOL (AVG) 4.2 SEC., CHIP TO CHIP (AVG) 4.2 SEC, GENERAL:, AIR REQUIRED 4 SCFM,100 PSI, EQUIPPED WITH, HAAS CNC CONTROLS, RIGID TAPING, CHIP AUGER, 20 POSITION TOOL CHANGER, HIGH VOLTAGE OPTIONS, COOLANT THRU SPINDLE, PROGRAMABLE COOLANT NOZZLE,

2003 OKUMA MC-V3016 5-AXIS CNC VERTICAL MACHINING CENTER S/N: 0038 SPECIFICATIONS, TABLE:, LENGTH: 39.4, WIDTH: 20.37, NUMBER OF STD T-SLOT: 4, T-SLOT WIDTH: 5/8, MAX WEIGHT ON TABLE: 1500 LBS., TRAVELS:, X-AXIS: 30.2, Y-AXIS: 16.1, Z-AXIS: 17.7, SPINDLE NOSE TO TABLE (MIN.- MAX.): 5.91 24.25, SPINDLE:, SPINDLE: TAPER SIZE: 40, SPEED RANGE: 0 8,000 RPM, SPINDLE TYPE:, SPINDLE POWER : 20 HP, TOOL CHANGER:, CAPACITY: 20, TOOL WEIGHT: 17.6 LBS., MAX TOOL DIA: 3.54, MAX TOOL LENGTH: 11.8, TOOL CHANGING TIME: 1.3 SECONDS, GENERAL:, POWER: 40 KVA, 220/480V 3-PHASE, OVERALL DIMENSIONS: 90 X 92 X 102 HIGH, WEIGHT: 14,800 LBS., EQUIPPED WITH, OKUMA OSP E100M CNC, TSUDAKOMA TN-160 5-AXIS ROTARY TABLE, 20 POS TOOL CHANGER, 40 TAPER, 8,000 RPM SPINDLE, COOLANT SYSTEM, HIGH PRESSURE COOLANT THRU SPINDLE, APPROX 13 TOOL HOLDERS INCLUDED,

2003 HAAS VF-2D 5-AXIS CNC VERTICAL MACHINING CENTER, S/N: 30977, SPECIFICATIONS, X-AXIS TRAVEL 30", Y-AXIS TRAVEL 16", Z-AXIS TRAVEL 20", TABLE 36"X14", MAX. SPINDLE RATING 20 HP, MAX. SPINDLE SPEED 7,500 RPM, DRIVE SYSTEM INLINE DIRECT-DRIVE, TAPER CT40, FEEDRATES:, X, Y, Z RAPIDS 1000 IN/MIN, MAX. CUTTING 833 IN/MIN, TOOL CHANGER TYPE SMTC, CAPACITY 24 + 1, MACHINE WEIGHT 8,000 LBS., EQUIPPED WITH, HAAS CNC CONTROLS, SIDE MOUNT 24 POSITION, AUTOMATIC TOOL CHANGER, 7,500 RPM INLINE DIRECT DRIVE SPINDLE, 4TH AXIS DRIVE, 5TH AXIS DRIVE, 4TH AND 5TH AXIS ROTARY TABLES, CHIP AUGER, COOLANT SYSTEM, SPLASH GUARDS, INTERNAL MULTI TAP TRANSFORMER, ROTATION & SCALING, FLOPPY DISC DRIVE, MACROS, SPINDLE ORIENTATION, REMOTE JOG HANDLE, PROGRAMABLE COOLANT NOZZLE

2017 SAMSUNG MCV-500 4-AXIS CNC VERTICAL MACHINING CENTER, S/N: 17A7M0075 SPECIFICATIONS DATA, MAKE SAMSUNG, MODEL MCV-500, MACHINE TYPE VERTICAL MACHINING CENTERS, CONTROL FANUC 0I-MF, X AXIS TRAVEL 41.34 IN, Y AXIS TRAVEL 21.26 IN, Z AXIS TRAVEL 20.47 IN, POWER 25 HP, MAX RPM 10,000 RPM, RAPID TRAVERSE 1,417/1,417/1,417, TABLE WIDTH 21.26 IN, TABLE LENGTH 47.24 IN, NOSE TO TABLE 22 IN, NUMBER OF TOOLS 30, TOOL CHANGE TIME TOOL TO TOOL 1.3 SEC, MAX TOOL LENGTH, MAX TOOL WEIGHT, SPINDLE TAPER CAT40 (BIG PLUS), TABLE LOAD 2205 LBS., PALLET INDEXING, MACHINE DIMENSIONS W X D X H 143 X 112.6 X 109.4, MACHINE WEIGHT 14771 LBS., EQUIPPED WITH, FANUC OI-MF CNC CONTROL, 10,000 RPM, 40 TAPER (BIG PLUS), 25 HP, 30 POSITION TOOL CHANGER, 4TH AXIS ROTARY TABLE, COOLANT THRU SPINDLE, CHIP CONVEYOR

2015 BROTHER SPEEDIO M140X1 CNC 5-AXIS MULTITASKING DRILL TAP TURNING CENTER S/N: 111357, SPECIFICATIONS, TABLE SIZE: 5.5 DIAMETER, MAXIMUM TABLE WEIGHT: 88.2 LBS, X-AXIS TRAVEL: 7.9, Y-AXIS TRAVEL: 17.3, Z-AXIS TRAVEL: 12.0, A-AXIS TRAVEL: 5 ~ -95, C-AXIS TRAVEL: 360, SPINDLE MOTOR: 13.5 HP, SPINDLE SPEEDS: 10,000 RPM, SPINDLE TAPER: BT-30, 5.5 DIAMETER TABLE, ROTATION UPTO 2000RPM FOR TURNING 6 HP MOTOR, AUTOMATIC TOOL CHANGER: 22 ATC, MACHINE DIMENSIONS: 50.4 X 144.7 X 98.9, MACHINE WEIGHT: 5,226 LBS, EQUIPPED WITH, OPTIONS:, BROTHER CNC-C00 CONTROL WITH BUILT-IN PLC, CHIP CONVEYOR, 4TH AXIS ROTARY TABLE TURNING TABLE, 5 AXIS TILTING, 435 PSI HIGH PRESSURE PUMP, COOLANT THRU SPINDLE, HYDRAULIC CLAMPING SYSTEM,

HARDINGE 5C ROTARY COLLET INDEXER WITH H-5CI-C CONTROL BOX 10 ARC-SEC REPEATABILITY, +/- 25 ARC-SEC ACCURACY, MAX. RUNOUT .0002 (.005MM) TIR HARDINGE 5C SPINDLE WITH 4/101.2MM CENTERLINE HEIGHT TO BASE STREAMLINED CASTING AND REMOVABLE HANDLE FOR INCREASED SPINDLE CLEARANCE AND BETTER TOOL ACCESS 0.001 TO 360 PER SECOND INDEXING SPEED HIGH-LOAD, TAPERED DUAL ROLLER BEARING SPINDLE MANUAL COLLET CLOSER IS STANDARD SINGLE, DUAL, TRIPLE, QUAD, AND PLATE TRUNNION CONFIGURATIONS USES STANDARD 5C SPINDLE TOOLING H-5CI-C CONTROL BOX S/N: 1637

2016 MOTIVAIR MPC-A 6000 AIR COOLED 44.5 TON CHILLER, S/N C12BU1039 SPECIFICATIONS, COOLING CAPACITY 44.5 TONS, DATE OF MFG. 12/2016, POWER SUPPLY 460V/3PH/60HZ, SCCR 6 KA, FLA 106 A, MCA 112 A, MCP 134 A, COMPRESSOR (EACH) RLA/LRA 21.9 A / 150 A, FANS (EACH) HP/FLA 2.92 HP / 3.8 A, PUMPS (EACH) HP/FLA 5.36 HP / 5.8 A, HEATERS 460V / 90W, REFRIGERANT R410A 35.5 + 34.4 LBS., HIGH SIDE MAX 652.2 PSI, LOW SIDE MIN 72.5 PSI, * WAS BEING USED ON AN INDEX MS-40 AND MS-22 MULTI SPINDLE CNC LATHES,

2015 STRUERS HEXAMATIC AUTOMATIC LABORATORY SPECIMEN PREP MACHINE GRINDING AND POLISHING - EXTREME VERSATILITY FOR THE PREPARATION OF BOTH INDIVIDUAL SPECIMENS AND SPECIMEN HOLDERS WITH OR WITHOUT CONVEYOR, FOR THE UNINTERRUPTED PREPARATION OF LARGER SERIES OR THE FULLY AUTOMATIC PREPARATION OF INDIVIDUAL HOLDERS IDEAL FOR THE PREPARATION OF MATERIALS REQUIRING DIFFERENT PREPARATION METHODS DUE TO THE AUTOMATIC EXCHANGE OF UP TO EIGHT DIFFERENT PREPARATION SURFACES EASY AND FLEXIBLE SPECIMEN HANDLING WITH HEXAMATIC WE HAVE BROUGHT FULLY AUTOMATIC SPECIMEN PREPARATION TO A NEW LEVEL HEXAMATIC CAN PROCESS BOTH SPECIMEN HOLDERS AND SPECIMEN MOVER PLATES FOR INDIVIDUAL SPECIMENS NO MATTER IF MANY SIMILAR SPECIMENS OR A FEW INDIVIDUAL SPECIMENS OF A CERTAIN TYPE HAVE TO BE PRODUCED, HEXAMATIC IS CAPABLE OF HANDLING THAT. SPECIMEN HOLDERS THAT CAN HOLD DIFFERENTLY SHAPED SPECIMENS ARE PREPARED USING CENTRAL FORCE, WHEREAS INDIVIDUAL SPECIMENS IN SPECIMEN MOVER PLATES HAVE THE FORCE APPLIED INDEPENDENTLY. THIS ALLOWS FOR THE PREPARATION OF ONE TO SIX SPECIMENS WITHOUT THE NEED FOR DUMMIES. HEXAMATIC WITH CONVEYOR WHEN LARGER AMOUNTS OF SPECIMENS HAVE TO PREPARED, HEXAMATIC WITH CONVEYOR IS THE IDEAL SOLUTION. WITH A CAPACITY OF EIGHT SPECIMEN HOLDERS OR SPECIMEN MOVER PLATES, HEXAMATIC CAN BE LOADED WITH MANY SPECIMENS TO BE PREPARED WITHOUT REQUIRING OPERATOR ATTENTION. WHILE THE MACHINE IS RUNNING, ALREADY PREPARED SPECIMENS CAN BE EVALUATED. THE EXCEPTIONAL DESIGN OF HEXAMATIC WITH THE EXTERNAL CONVEYOR ALLOWS REMOVING PREPARED SPECIMEN HOLDERS OR INSERTING UNPREPARED HOLDERS WITHOUT INTERRUPTING THE PREPARATION PROCESS. SENSORS AUTOMATICALLY DETECT INSERTED HOLDERS AS SOON AS A SPECIMEN HOLDER OR SPECIMEN MOVER PLATE IS INSERTED IN THE CONVEYOR, BUILT-IN SENSORS AUTOMATICALLY DETECT THEIR PRESENCE. THIS IS INDICATED ON THE GRAPHICAL USER INTERFACE, AND A PREPARATION METHOD FOR EACH INDIVIDUAL HOLDER CAN EASILY BE SELECTED. AUTOMATIC DRESSER ON HEXAMATIC, THE DRESSER OPERATES FULLY AUTOMATICALLY AND DRESSES THE GRINDING STONE EITHER IN PRE-DEFINED INTERVALS OR WHENEVER THE REMOVAL RATE DECREASES. CONVEYOR WITH SAFETY COVER* UP TO 8 SPECIMEN HOLDERS OR SPECIMEN MOVER PLATES CAN BE PLACED IN THE CONVEYOR AND PREPARED AUTOMATICALLY.(THIS MACHINE DOES NOT HAVE A CONVEYOR) PLANE GRINDING STATION HEXAMATIC CAN BE USED EITHER WITH A GRINDING STONE OR A DIAMOND GRINDING DISC, DEPENDING ON THE MATERIAL TO BE PREPARED. HIGH SPEED PLANE GRINDING ALLOWS FOR THE SHORTEST POSSIBLE PREPARATION TIMES. RECIRCULATION COOLING UNIT FOR THE PLANE GRINDING STATION A 50 LITRE RECIRCULATION COOLING UNIT IS USED. BEACON A BEACON IS MOUNTED ON TOP OF HEXAMATIC TO ALWAYS SHOW THE CURRENT STATE OF THE MACHINE. ELEVATOR FOR DISC EXCHANGE HEXAMATIC HAS A BUILT-IN, AUTOMATIC DISC EXCHANGE. EIGHT DIFFERENT PREPARATION SURFACES ARE STORED IN THE ELEVATOR AND EXCHANGED ACCORDING TO THE SELECTED PREPARATION METHOD TOUCH SCREEN A LARGE 17" TOUCH SCREEN IS USED TO OPERATE HEXAMATIC. ALL FUNCTIONS ARE OPERATED FROM HERE, AND THE PROCESS FLOW CAN BE MONITORED IN DETAIL. BOTTLE COMPARTMENT IN EIGHT BOTTLES ALL THE NECESSARY SUSPENSIONS AND LUBRICANTS ARE STORED. THE WEIGHT OF THE BOTTLES IS MONITORED CONTINUOUSLY AND THE OPERATOR IS INFORMED IF BOTTLES ARE RUNNING LOW. ADVANCED MONITORING FUNCTIONS FOR CONSISTENT PREPARATION RESULTS THE REMAINING CONTENT OF THE BOTTLES IS CONTINUOUSLY MONITORED AND DISPLAYED. BOTTLE CONTENT IS MONITORED ALL BOTTLES FOR THE DIFFERENT SUSPENSIONS AND LUBRICANTS USED DURING PREPARATION ARE PLACED ON WEIGHING CELLS. THE CONTENTS OF THE BOTTLES IS CONTINUOUSLY MONITORED AND DISPLAYED, AS SOON AS A NEW SPECIMEN HOLDER IS INSERTED AND THE PREPARATION METHOD IS SELECTED, HEXAMATIC WILL CALCULATE THE AMOUNT OF SUSPENSION AND LUBRICANT NECESSARY. IF THE REMAINING AMOUNT IS NOT SUFFICIENT TO PREPARE ALL THE SPECIMENS IN THE CONVEYOR, THE USER WILL BE INFORMED TO TAKE APPROPRIATE ACTION. THIS PREVENTS UNNECESSARY STOPS DURING PREPARATION OR INSUFFICIENTLY PREPARED SPECIMENS DUE TO MISSING CONSUMABLES. WHEN THE SAME PREPARATION METHOD IS USED ALL THE TIME AND NOT ALL BOTTLES ARE UTILIZED, THE SAME SUSPENSION CAN BE FILLED INTO TWO BOTTLES AND HEXAMATIC WILL AUTOMATICALLY START USING THE SECOND BOTTLE WHEN THE FIRST IS EMPTY. MONITORING OF ACCUMULATED PREPARATION TIME OF DISCS AND CLOTHS THE ACCUMULATED ACTUAL PREPARATION TIME OF EACH INDIVIDUAL GRINDING DISC OR POLISHING CLOTH IS MONITORED AND DISPLAYED IN THE CONFIGURATION MENU. INDIVIDUAL LIFETIMES CAN BE SET FOR ALL PREPARATION DISCS, AND HEXAMATIC WILL PROMPT THE USER FOR EXCHANGE WHEN THAT TIME HAS BEEN REACHED. THIS FEATURE WILL ALSO PREVENT INSUFFICIENTLY PREPARED SPECIMENS DUE TO WORN CONSUMABLES. ULTRASONIC CLEANING CHAMBER WITH AUTOMATIC LIQUID EXCHANGE THE ULTRASONIC CLEANING CHAMBER IS EQUIPPED WITH AN AUTOMATIC EXCHANGE AND REFILL FUNCTION. THE LIQUID LEVEL IN THE CHAMBER IS MONITORED CONTINUOUSLY AND REFILLED IF NECESSARY. AT USER-DEFINED INTERVALS, THE ENTIRE CONTE

2010 CHEVALIER FMG-1632CNC-HD PRECISION CREEP FEED PROFILE GRINDER S/N: HD975001, SPECIFICATIONS, PRODUCT DESCRIPTION, DETAILED DESCRIPTION: HIGH-EFFICIENCY CNC FORMING GRINDER FMG-1632CNC-HD (CNC SERIES) FORMING GRINDING MACHINE SERIES FUYU COMPANY AIMS AT AEROSPACE AND HIGH-PRECISION DIFFICULT-TO-MACHINE PARTS., WITH MORE THAN 30 YEARS OF EXPERIENCE IN GRINDING TECHNOLOGY, WE HAVE DEVELOPED A HIGH-EFFICIENCY AND HIGH-PRECISION THREE-AXIS MOVING COLUMN POWERFUL HEAVY-CUTTING CNC MILL, THE BED AND WORKTABLE ARE FIXED, AND THE MACHINING ACCURACY IS NOT AFFECTED BY THE WEIGHT OF THE WORKPIECE AND THE SIZE OF THE FIXTURE. VERY SUITABLE FOR, GRINDING THE ROOTS OF AIRCRAFT TURBINE BLADES, STEAM TURBINE BLADES, AND OTHER DIFFICULT-TO-GRIND MATERIAL PARTS WITH COMPLEX SHAPES, SHAPED GRINDING ENABLES THE GRINDER TO EXERT GREATER PROCESSING FUNCTIONS, ACHIEVING HIGH PERFORMANCE, HIGH PRECISION, AND EASY OPERATION, THE CHARACTERISTICS., THE MOVABLE COLUMN TYPE CNC FORMING GRINDER PROVIDES A FASTER PROCESSING CYCLE AND GREATLY IMPROVES THE PRODUCTION EFFICIENCY., THE FIXED WORKBENCH AND MOVABLE COLUMN DESIGN ENABLE THE MACHINE TO CARRY A WEIGHT OF UP TO 3326LBS (1512KG),, THE GRINDING WIDTH ALSO REACHES 16 INCHES (410MM)., UNDER THIS PROCESSING CONDITION, THE MACHINE STILL MAINTAINS STABLE GRINDING ACCURACY, AND THE REPEATABILITY IS EVEN AS HIGH AS, 0.0001"(0.001MM) THIS MACHINE IS ALSO APPLICABLE AND OPTIONAL VERTICAL SPINDLE., MOVING COLUMN TYPE, HEAVY CUTTING SLOW FEED FUNCTION, TABLE SIZE (WIDTH X LENGTH): 410 X 810 MM, MAXIMUM LOAD OF TABLE: 1,500KG, SPINDLE MOTOR: UP TO 75HP, SPINDLE SPEED: 6,000RPM, WHEEL HUB, ELECTROMAGNET, ROTARY ELECTROMAGNET, PRECISION VICE, SPINDLE MOTOR (50HP), ADJUSTABLE ANGLE DRESSER, DOUBLE-HEADED ROLLER DRESSER (DIAMOND ROLLER NOT INCLUDED), SINGLE-HEAD ROLLER DRESSER (DIAMOND ROLLER NOT INCLUDED), DOUBLE-SUPPORT SINGLE-HEAD ROLLER DRESSER (DIAMOND ROLLER NOT INCLUDED), WHEEL BALANCE PLATFORM, WHEEL HEAD DIAMOND ROLLER DRESSER (DIAMOND ROLLER NOT INCLUDED), PAPER BELT ELECTROMAGNETIC WATER FILTER (WITH A ROLL OF FILTER PAPER), PAPER BELT WATER FILTER (WITH A ROLL OF FILTER PAPER), OIL TEMPERATURE COOLING REGULATOR, SILENT AIR COMPRESSOR, AUTOMATIC BALANCE CORRECTOR, HORIZONTAL INDEX PLATE (CNC CONTROL) (THIS INDEX PLATE IS DRIVEN BY AC SERVO MOTOR AND CONTROLLED BY CNC), EQUIPPED WITH, CHEVALIER FMG-1632CNC-HD, PRODUCTION CNC GRINDERS, FANUC 18IMB 3-AXES CNC CONTROL WITH 10.4 COLOR LCD, 4 FULLY AUTOMATIC GRINDING CYCLES: RAPID APPROACH, ROUGH GRINDING, FINE GRINDING, AND WHEEL DRESSING WITH AUTOMATIC COMPENSATION., SPINDLE SUPPORTED BY 6 ABEC CLASS 7 (P4) SUPER PRECISION ANGULAR CONTACT BALL BEARINGS PLUS 1 SET OF N-N NEEDLE ROLLER BEARING IN FRONT OF SPINDLE., TSUBAKI CLASS C2 (50 MM) PRECISION BALL SCREWS ON CROSS-FEED AND ELEVATING DRIVES., TSUBAKI CLASS C2 (63 MM) PRECISION BALL SCREWS ON LONGITUDINAL DRIVE., AC SERVO MOTORS FANUC: 2.1KW ON Y & Z AXES, 7.3KW ON X AXIS, FULLY ENCLOSED SPLASH GUARD, SPECIFICATIONS, TABLE SIZE (W X L): 400 X 810MM (16 X 32), T-SLOT (NO. X W X DIS.): 5 X 18 X 100MM (5 X 0.709 X 3.937), MAX. TABLE LOAD: 1,500KG (3,306 LBS.), COLUMN MOVING, CAPABLE OF CREEP FEED FUNCTION, TABLE SPEED:, X-AXIS: 10-25,00MM/MIN (0-88FPM), Y-AXIS: 0-3,800MM/MIN (0-12.5FPM), Z-AXIS: 0-4,000MM/MIN (0-13FPM), SPINDLE SPEED: 1,800RPM (OPTIONAL 6,000RPM), SPINDLE MOTOR: UP TO 75HP, DUAL FACE ROTARY DIAMOND DRESSER, AUTOMATIC DYNAMIC BALANCING SYSTEM, HIGH PRESSURE COOLANT SYSTEM, HAND WHEEL FOR PREPARATION

2019 YC INDUSTRIES YCWJ-3742-L3015 5-AXIS CNC WATERJET CUTTING MACHINE - *UNIT HAS NEVER BEEN USED DYNAMIC 5AXIS WATER JET CUTTING MACHINE THIS DYNAMIC 5 AXIS WATER JET CUTTING MACHINE IS SPECIALLY USED TO CUT MARBLE AND GRANITE, IT CAN COMPENSATE 10 CUTTING ANGLE. IT IS ONE KIND OF BEVEL CUTTING MACHINE. DUE TO THE WATER JET CUTTING IS A FLEXIBLE CUTTING, THEREFORE,THERE WILL BE A CERTAIN DEGREE OF INCLINATION ON THE PRODUCT CROSS SECTION AFTER CUTTING BY THE TRADITIONAL 3 AXIS WATER JET CUTTING.IN ORDER TO ENSURE THE ACCURACY OF VERTICAL CUTTING SECTION, IT MUST REDUCE THE CUTTING SPEED. HOWEVER, OUR 5 AXIS WATER JET CUTTING MACHINE CAN ENSURE THE ACCURACY OF VERTICAL CUTTING SECTION BY COMPENSATING THE CUTTING ANGLE, WITHOUT REDUCING THE CUTTING SPEED. SO THAT IT CAN BE USED FOR CUTTING PARQUET STONE, THE PARQUET FLOORING DOES NOT NEED TO BE POLISHED AGAIN, WHICH CAN SAVE TIME AND LABOR. DYNAMIC 5 AXIS CUTTING HEAD X,Y,Z AXIS FOR TRANSMISSION A,B AXIS FOR COMPENSATION 0-10 WORK TABLE PARAMETER CNC WATER JET CUTTING MACHINE(L=GANTRY TYPE) PARAMETERS UNIT YCWJ-L3015 EFFICIENT CUTTING AREA MM 3000*1500 AXIS TRAVEL X MM 3000 Y MM 1500 Z MM 150-180 X AXIS AND Y AXIS ADOPT HIWIN OR I+F BALL SCREW AND GUIDEWAY;THE SERVO MOTOR TO DRIVE WE ADOPT MITSUBISHI OR YASKAWA CUTTING ACCURACY MM +/-0.1 POSITIONING ACCURACY MM +/-0.02 X,Y DRY-RUN SPEED M/MIN 0-15 (IF NEED 30M/MIN SPEED,WE CAN DO AS REQUEST ) CUTTING SPEED M/MIN AS TO DETAIL MATERIAL AND THICKNESS HIGH PRESSURE PUMP MAIN FEATURE CONTROL: PLC SHIFTING: ELECTRO-HYDRAULIC CONTROL COOLING: COOLER/OIL HEAT EXCHANGER INLET WATER FILTER ACCURACY: 0.45M OIL-RETURN FILTER ACCURACY: 20 M WORKING TEMP: 0-50C OUTLET: UNF 3/8" COOLING IN/OUT-LET: NPT1" MAX ORIFICE SIZE: 0.33MM WE COOPERATE WITH ACCSUTREAM/HYPERTHERM SINCE 2008,MOST WATER JET PARTS OF THE HIGH PRESSURE PUMPS ARE IMPORTED FROM USA DIRECTLY. HIGH PRESSURE PUMP MODEL YCG-3742S MAX PRESSURE 4137BAR/60,000PSI MAX WATER FLOW 3.7L/MIN MAX ORIFICE/NOZZLE 0.013/0.04 POWER 37KW/50HP CNC CONTROLLER 1. 17''LCD LIQUID CRYSTAL DISPLAY. 2. DNC ON-LINE WORKING FUNCTION. 3. FUNCTIONS OF RETURNINGARBITRARY POINT,BENDING AND CIRCULAR ARE WORKING AUTO DECELERATION. 4. FUNCTION OF CUTTING FIGURE IMITATION DISPLAY. 5. 80GB MEMORY HARD DISK. 6. MITSUBISHI AC SERVO DRIVER AND MOTOR. 7. 1GB MEMORY CARD. 8. MULTILINGUAL FUNCTION(CHINESE ENGLISH ETC.). 9. DRIVE-BY-WIRE AND HAND-HOLD CONTROLLER. 10. NAIKY PCIMC-6A SPECIAL SOFTWARE IS SPECIAL FOR YC. AUTO ABRASIVE DELIVERY SYSTEM & COOLING SYSTEM

2008 ELUMATEC DG-104/02 DOUBLE CUT MITRE SAW, S/N: 31-234, SPECIFICATIONS, MACHINE TYPE: COLD SAWS, BED LENGTH: 4,500MM/177, MINIMUM CUTTING LENGTH AT 90: 13.7795, MINIMUM CUTTING LENGTH TILTED AT 45: 13.7795, PIVOTING RANGE INWARDS: 90 45, (UP TO 22.5 MANUAL WITH DIGITAL DISPLAY), TILTING RANGE INWARDS: PNEUMATICALLY 90 45, SAW BLADE DIAMETER: 16.5354, SAW BLADE SPEED: 2,800 RPM, POWER SUPPLY: 230/400 V, 3~, 50 HZ, POWER OUTPUT PER MOTOR: 4 KW, COMPRESSED AIR SUPPLY: 7 BAR, AIR CONSUMPTION PER WORKING CYCLE: 40 WITHOUT SPRAYING, 64 WITH SPRAYING, ELUMATEC E-570 CONTROLLER, (2) ELUMATEC E-110 DIGITAL DISPLAY,

2004 THERMWOOD CS40 3-AXIS CNC ROUTER, S/N: CS400430904, SPECIFICATIONS, TABLE W 48, TABLE L 96, POWER 10 HP, RMP 18,000 RPM, TAPER 30, # AXIS 3, CONTROL CNC (QCORE SUPER CONTROLLER), MOVING TABLE STYLE, TABLE SIZE 48" X 96", TRAVELS, X 100", Y 61", Z 7.8", FEED RATES, X 2100 IPM, Y 1200 IPM, Z 1200 IPM, SPINDLE TYPE HSD MODEL 919 BT30, ROUTER 10.5 HP, ROUTER SPEED 5000-18,000 RPM, EQUIPPED WITH, QCORE CNC SUPER CONTROLLER, THN OS SOFTWARE VERSION #9.0, 4' X 8' TABLE, 5 POSITION AT THE HEAD TOOL CHANGER, 4 POSITION BAR TYPE TOOL CHANGER, AUTOMATIC TOOL LENGTH MEASURING DEVICE, MANUAL POP UP PINS, 10 HP HSD SPINDLE MODEL 919, VACUUM PUMP,

2011 HOLZHER DYNESTIC 7516 5'X10' CNC ROUTER S/N: 27/1-102, SPECIFICATIONS, DISPLACEMENT TRAVEL:, X-AXIS LENGTH 124.66", Y-AXIS WIDTH 61", VERTICAL BORING DIMENSIONS:, X-AXIS MAXIMUM 122.95", Y-AXIS MAXIMUM (ALL DRILLS) 57.32", ROUTER WORKING DIMENSIONS:, X-AXIS MAXIMUM 122.24", Y-AXIS MAXIMUM 61.10", POWER REQUIRED: 220 - 242 VOLTS, 3 PH/FULL LOAD AMPERAGE OF MACHINE IS 50 AMPS., EQUIPPED WITH, 8 POSITION TOOL CHANGER, BORING UNIT, BECKER VACUUM PUMP, NEW SPINDLE NEVER USED IN PRODUCTION,

DRILLMATION BOREMATION KNEE TYPE GUN DRILL, SPECIFICATIONS, TABLE 48" X 18", MAX DIA. HOLE DRILLED 1.25", MAX DRILLING DEPTH 36", VERTICAL ADJUSTMENT 9", # SPINDLES 1, SPINDLE SPEED 2260 RPM, MOTOR 12.5 HP, EQUIPPED WITH, DRO PRO5 3M DIGITAL READ OUT, COOLANT SYSTEM, S/N: 408

1988 OKAMOTO ACCUGAR-124N 12"X24" HYDRAULIC SURFACE GRINDER S/N: 7441, SPECIFICATIONS, SURFACE GRINDER W/KANET MAG CHUCK, TABLE SIZE: 24" X 12", MAX WORKPIECE HEIGHT: 13.7", MAX WORKPIECE WEIGHT: 930 LBS., TABLE LONGITUDINAL TRAVEL: 29.5", TABLE CROSS TRAVEL: 13.6", HYDRAULIC FEED: 1 FPM- 100 FPM, HAND FEED: 1.85", TABLE CROSS HYD INCREMENT: 0.2"- 0.8", TABLE CROSS HYD CONTINUOUS: 4 IPM- 40 IPM, TABLE CROSS HAND : 0.25", GRADUATION OF HANDWHEEL: 0.001", 12" DIAMETER GRINDING WHEEL, GRINDING WHEEL WIDTH: 1.5", GRINDING BORE: 5", MAGNETIC CHUCK MAGNETIC CHUCK CONTROL, 230/460 VOLT, EQUIPPED WITH, 12" X 24" ELECTRO MAGNETIC CHUCK AND CHUCK CONTROLS, OVERHEAD WHEEL DRESSER, DIGITAL READOUTS, COOLANT SYSTEM, INCREMENTAL DOWN FEED,

OKAMOTO IGM-2MB PRECISION INTERNAL GRINDING MACHINE, S/N 17026, WITH MDI CONTROL, AUTOMATIC CYCLE, AUTOMATIC DRESSING WITH DRESS COMPENSATION AND WHEEL WEAR COMPENSATION. SPECIFICATION; INTERNAL DIAMETER TO BE GROUND IS 8.0, STANDARD ACCESSORIES, TEACH-INPUT POSITIONING SYSTEM, MANUAL PULSE GENERATOR, OKAMOTO USER FRIENDLY MDI CONTROL, SERVO DRIVEN WORK HEAD, SERVO DRIVEN WHEEL HEAD, AIR ACTUATOR FOR POWER CHUCK, MINIMUM INCREMENT 0.00001 (DIA), STD. SPINDLE OIL MIST LUBRICATION SYSTEM, HIGH SPEED TABLE RECIPROCATION, DRESSING DEVICE W/DIAMOND, TABLE STROKE FINE ADJUST (INCREMENT: 0.020), THROUGH SPINDLE COOLANT, COOLANT NOZZLE AT THE WHEEL HEAD, LEVELING BOLTS WITH PLATES, TABLE POSITION INDICATOR, COLOR LCD MONITOR, CONTINUOUS AND INTERMITTENT FEED, TABLE ENCLOSURE WITH DOOR INTERLOCK, NECESSARY TOOLS WITH TOOLBOX, CHUCK GUARD, INSTRUCTION MANUAL & INSPECTION REPORT, MACHINE FEATURES, TABLE POSITIONING SYSTEM ... SAVES SET-UP TIME AND BOOSTS PRODUCTIVITY. OPERATOR SIMPLY MOVES THE TABLE MANUALLY TO THE SIX POSITIONS SHOWN BELOW, PRESSES A POSITION IN PUT KEY AT EACH POSITION AND THE LSI CONTROL REMEMBERS THESE LOCATIONS., USER FRIENDLY MDI CONTROL ... THE MDI CONTROLLER IS MADE BY OKAMOTO AND USES A UNIQUE MICRO PROCESSOR CONTROL SYSTEM THAT PROMOTES FAST EASY SET-UP. ROUGH, MEDIUM GRIND, DRESS AND FINE GRIND IN ONE SET-UP., UP TO TEN AUTOMATIC DRESS CYCLES ... PER PART WITH AUTOMATIC DRESS COMPENSATION AND WHEEL WEAR COMPENSATION., THE WHEEL HEAD FEATURES RIGID UNIT TYPE SPINDLES ... AC STEPPING MOTOR COUPLED TO A BALL SCREW FOR DRESSING, 0.00001 (DIA.) MINIMUM INCREMENT, AND LINEAR MOTION GUIDEWAYS FOR SMOOTH OPERATION AND ACCURACY., WORK HEAD IS OF CAST IRON CONSTRUCTION ... AND FEATURES AN AC SERVO MOTOR COUPLED TO A BALL SCREW WITH, TABLE IS OF CAST IRON CONSTRUCTION AND ADOPTED LINEAR SLIDE WAY SYSTEM ... IS DRIVEN BY BALL SCREW ACHIEVED FOR TABLE SPEED FROM 20 TO 600 IPM AND VERY PRECISE TABLE POSITIONS, ESPECIALLY EFFECT FOR BLIND HOLE WORKPIECE., MDI CONTROLS ... FACILITATE SET-UP AND EDITING FUNCTIONS, HIGH SPEED TABLE SHORTENS POSITIONING CYCLE TIME AND HIGH SPEED TABLE RECIPROCATION REDUCES GRINDING CYCLE TIME. THE OKAMOTO IGM-2M INTERNAL GRINDER IS IDEAL FOR LOW TO HIGH PRODUCTION OF ONE (1) DIAMETER GRIND APPLICATIONS., 36-CYCLE MEMORY ... 36 GRINDING CYCLES CAN BE STORE TOGETHER WITH GRINDING CONDITION WHICH SELECTED MANUAL SWITCH FOR THAT PROCESS., COLOR LCD MONITOR ... USER FRIENDLY DATA INPUT SCREEN AT MAIN OPERATION MONITOR, NUMEROUS FUNCTION ... SET TWO DIFFERENT TABLE SPEED FOR COARSE GRINDING & FINE GRINDING, INTERMITTENT INFEED CAN BE SELECTABLE FOR RIGHT END, LEFT END OR BOTH ENDS., SAFETY & MIST CONTROL ... TABLE FULL ENCLOSURE WITH DOOR INTERLOCK SYSTEM., MACHINE SPECIFICATIONS IGM-2MB, CAPACITY:, INTERNAL GRINDING RANGE 0.24 - 8.0 INCH DIAMETER, GRINDING STROKE 0.00 - 8.0 INCH, SWING INSIDE THE CHUCK COVER 14.0 INCH, SWING OVER THE TABLE 24.0 INCH, TABLE:, MAXIMUM TRAVEL 20.0 INCH, TABLE SPEED 20 - 800 IPM, HIGH SPEED SHORT STROKE 500 RECIPROCATIONS/MIN. (0.08 STROKE), WORK HEAD:, SPINDLE SPEED 50 - 1200 RPM, SWIVEL ANGLE -5 - +15, MAXIMUM CROSSFEED TRAVEL 9.4 INCH, MINIMUM INCREMENTAL INFEED 0.00001 INCH (0.00003 INCH/OPTION), AUTOMATIC FEED RATE, ROUGH & MEDIUM (INTERMITTENT) 0 - .0040 INCH (12 SELECTIONS), ROUGH & MEDIUM (CONTINUOUS) 0 - 0.1600 INCH/MIN. (12 SELECTIONS), FINE (INTERMITTENT) 0 - 0.0040 INCH (12 SELECTIONS), FINE (CONTINUOUS) 0 - 0.0800 INCH/MIN. (12 SELECTIONS), MANUAL FEED PER GRADUATION (X1)0.00001, (X10) 0.0001 INCH, MANUAL FEED PER REVOLUTION (X1)0.001, (X10) 0.01 INCH, MOTORS:, WORK HEAD 2.0 HP, GRINDING WHEEL SPINDLE 5.0 HP, CROSSFEED SERVO 0.26 HP, TABLE LONGITUDINAL FEED 1.0 HP, POWER SUPPLY: 16 KVA, DESIRED POWER SUPPLY INCLUDING COOLANT SYSTEM, FLOOR SPACE (L X W X H): 95 X 78 X 69, NET WEIGHT: 6,160 LBS., EQUIPPED WITH, KITAGAWA JN09T 3-JAW CHUCK, 20,000 RPM GRINDING SPINDLE, DIAMOND WHEEL DRESSER, COOLANT WITH FILTRATION SYSTEM

1987 OKAMOTO PSG-305 20" X 120" HYDRAULIC RECIPROCATING SURFACE GRINDER S/N: 1829, SPECIFICATIONS, OKAMOTO PSG-305 20" X 120" 3-AXIS AUTOMATIC SURFACE GRINDER WITH INCREMENTAL DOWN FEED AND ELECTROMAGNETIC CHUCK, EQUIPPED WITH:, INCREMENTAL DOWN FEED, 19-3/4" X 118" ELECTROMAGNETIC CHUCK WITH NEUTROFIER CONTROL, HYDRAULIC WHEEL DRESSER, COOLANT SYSTEM WITH PAPER FILTRATION AND MAGNETIC SEPARATOR, HYDRAULIC SYSTEM HEAT EXCHANGER, WHEEL HUB & NUT, ELECTRICS:, 230/460 VOLT, 3-PHASE, MAIN UNIT APPROX WEIGHT: 28600.00 LBS., MAIN UNIT DIMENSIONS (IN INCHES): LENGTH: 357.00" WIDTH: 109.00" HEIGHT: 93.00", COMPONENTS:, COOLANT SYSTEM: LENGTH: 64.00" WIDTH: 50.00" HEIGHT: 48.00", HYDRAULIC SYSTEM: LENGTH: 30.00" WIDTH: 46.00" HEIGHT: 38.00", OIL COOLER: LENGTH: 26.00" WIDTH: 21.00" HEIGHT: 50.00", SPECS:, TABLE WORKING SURFACE: 120.08" X 19.7", MAX LONGITUDINAL TABLE TRAVEL: 124.02", AUTO LONGITUDINAL FEED RATE: 1 TO 100 FPM, MAX DISTANCE SPINDLE / WHEEL TO TABLE: 23.4" (UNDER 20" WHEEL), MAX WHEEL SIZE : 20" X 2" X 5", WHEEL SPEED: 1100 RPM, CROSSFEED TRAVEL AUTO / MANUAL: 20.86", MAX GRINDING LENGTH X WIDTH: 120.08" X 20", CROSS FEED AUTOMATIC INCREMENTS: .20" TO 1.37", RAPID WHEELHEAD FEED RATE: 12" / MIN, AUTO WHEELHEAD DOWNFEED INCREMENTS: 0.0002" TO 0.002" PER COLUMN REVERSAL, HAND WHEELHEAD DOWNFEED INCREMENTS: 0.0002" GRADUATIONS, WHEELHEAD ELEVATION MOTOR: 1/2HP, HYDRAULIC MOTOR: 7-1/3HP, SPINDLE DRIVE: 10HP

TORNOS SAS-16-DC MULTIPLE SPINDLE AUTOMATIC BAR MACHINE, SPECIFICATIONS, - MAXI BAR DIAMETER : 16 [MM], - MAXI FEED LENGTH : 75 [MM], - MAXI TURNING LENGTH : 60 [MM], - NUMBER OF SPINDLES : 6, - NUMBER OF TRANSVERSAL SLIDES : 6, - NUMBER OF SPINDLE SPEEDS : 16, - SPINDLE SPEED : 1200-8000 [RPM], - MAXI PRODUCTION : 80 [PARTS/MIN], - NUMBER OF INDEPENDENT AVAILABLE FEEDS : 4, - INDEPENDENT FEEDS NORMAL STROKE : 45 [MM], - SIZES : 5000 X 900 [MM], - WEIGHT : 3000 [KG], EQUIPPED WITH, - SUB-SPINDLE WITH BRAKE, - COUNTER OPERATION DEVICE, - TURNING TOOL-HOLDERS, - FOOT AND DRUM, - BAR FEEDER, - COOLANT TANK, * WITH PUMP, - MISC. TOOLING, S/N: T59441

2010 FANUC ROBODRILL ALPHA T21IFLA CNC DRILL TAP VERTICAL MACHINING CENTER, W/PALLET CHANGER S/N: P105XH229, SPECIFICATIONS, SERIAL #:, P105XH229, FANUC ROBODRILL, OEM: FANUC LTD. (MADE IN JAPAN), DATE OF MANUFACTURE: MAY 2010, MODEL: -T21IFLA, TYPE: A04B-0099-B113 #BBH, SERIAL NO.: P105XH229, ELECTRICS: 220 VOLT; 3 PHASE; 50-60 CYCLE; 11 KVA, FEATURES AND SPECIFICATIONS, ...CNC CONTROL: FANUC SERIES 31I-A5, ...TABLE SIZE: 33.5" X 16.1", ...TABLE CAPACITY:, ...TRAVELS:, ......X-AXIS: 27.5", ......Y-AXIS: 15.75", ......Z-AXIS: 12.99", ...SPINDLE SPECIFICATIONS:, ......SPEED: 10,000 RPM, ......TAPER: BT-30, ...TOOL CHANGER CAPACITY: 21 SLOTS, ...RAPID TRAVERSE RATE: 2,125 IPM, ...TOOL CHANGE TIME: 0.9 SECONDS, ...A-B PALLET SHUTTLE UNIT, ...COOLANT SYSTEM, ROBODRILL DIMENSIONS (APPROX.): 110" X 80" X 96", OVERALL EQUIPMENT WEIGHT (APPROX.): 6,000 LBS.

2000 MOTION MASTER SB-55XT 5-AXIS CNC ROUTER W/TWIN 5'X5' TABLES, SPECIFICATIONS, TABLE SIZE (JOINED) 5'X10', TABLE SIZE INDEPENDENT (2) ALUMINUM 5'X5', 5-AXIS SIMULTANEOUS, X-AXIS 124", Y-AXIS 64", Z-AXIS 30", A-TILT +/- 110%, C-ROTATION 360 DEGREES, EQUIPPED WITH, FAGOR 8055 CNC CONTROL, (2) 5'X5' ALUMINUM TABLES, BECKER VACUUM PUMP, 5-AXIS SIMULTANEOUS OPERATIONS, 6 POSITION TOOL CHANGER, 30" Z-AXIS,