SIGMA Showroom Consignment Auction

WILD GOOSE CAN DEPALLETIZER WITH CONVEYOR SECTIONS LAST USED IN A BREWERY FOR DEPALLETIZING CANS

COBALT 100 SERIES CASE ERECTOR AND COLLATOR HAND PACK STATION SEMI-AUTOMATIC CASE ERECTOR AND COLLATING CONVEYOR. OPERATOR INSERTS BLANK CASE AND THE BOTTOM OF THE CASE IS SEALED BY THE MACHINE. USES 2 INCH WIDE TAPE. ELIMINATES FLAP TORQUING BY HOLDING THE CASE STATIONARY AND MOVING THE TAPE HEAD FOR SEALING. CASE SIZE RANGE: MINIMUM: 7 INCHES WIDE X 7 INCHES LONG X 4 INCHES TALL; MAXIMUM: 20 INCHES WIDE X 24 INCHES LONG. OUTPUT: UP TO 15 CASES PER MINUTE, DEPENDING ON CASE SIZE AND OPERATOR. ERGONOMIC TILTED DESIGN. STAINLESS STEEL CONSTRUCTION. COLLATING CONVEYOR. PREVIOUSLY USED FOR BAGGED SNACK FOODS. CONVEYOR WIDTH: 14 INCHES. INFEED HEIGHT: 19 INCHES. OUTFEED HEIGHT: 46 INCHES. STAINLESS STEEL CONSTRUCTION. CASTERS.

CLEATED INCLINE CONVEYOR WITH HOPPER 130"L X 12"W - USED CLEATED INCLINE CONVEYOR WITH: STAINLESS STEEL HOPPER: LENGTH: 49 INCHES WIDTH: 31 INCHES DEPTH: 14 INCHES INFEED HEIGHT: 39 INCHES DISCHARGE HEIGHT: 75 INCHES PLASTIC GINGED BELT LENGTH: 130 INCHES WIDTH: 12 INCHES CLEATS: CENTERS: 18 INCHES WIDTH: 9.25 INCHES HEIGHT: 1.5 INCHES 1 HORSEPOWER WASHDOWN STERLING ELECTRIC MOTOR ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3 STAINLESS STEEL FRAME

ROCKET A500 STAINLESS STEEL FOOD COMPOSTER WITH: STAINLESS STEEL CONSTRUCTION CONTINUOUS PROCESS OUTPUT: UP TO 600 LITRES PER WEEK MIXED ORGANIC WASTE SUITABLE FOR: COOKED & UNCOOKED MEAT & FISH COOKED & UNCOOKED FRUIT & VEGETABLES GARDEN WASTE ANIMAL WASTE DIMENSIONS: LENGTH: 98 INCHES WITH: 27.5 INCHES HEIGHT: 51 INCHES ELECTRICAL: 240 V 50 HZ PHASE 1

STAINLESS STEEL MIXING TUMBLER - USED MIXING TUMBLER WITH: APPROXIMATELY 400 GALLONS APPROXIMATE TUMBLET DIMENSIONS: LENGTH: 90 INCHES DIAMETER: 40 INCHES TUMBLER BLADE: 18 INCHES HIGH HINGED/LIFT OFF MANWAY DIAMETER: 19 INCHES INFEED: INSIDE DIAMETER: 4.5 INCHES PUSH BUTTON CONTROLS TIMER DIGITAL READOUTS 3 HORSEPOWER MOTOR ELECTRICAL: VOLTS: 380 PHASE 3 STAINLESS STEEL CONSTRUCTION

A-ONE MANUFACTURING CDR-1500-492 TOTE LIFT WITH: LOADING AREA: 35 LENGTH X 36 WIDTH (INCHES) OVERALL DIMENSIONS: 72 LENGTH X 60 WIDTH X 130 HEIGHT (INCHES)

DAMARK S4 L-BAR SEALER WITH SHRINK CHAMBER WITH: PRE-OWNED BUT NEVER PUT INTO PRODUCTION SIMULTANEOUSLY SEALS THE SHRINK WRAP AND VACUUM SHRINKS IT TO THE PRODUCT SEALING AREA: 22 INCHES LONG X 21 INCHES WIDE HOT WIRE SEAL BAR AUTOMATIC TAKEAWAY CONVEYOR INSIDE THE TUNNEL CHAMBER TAKEAWAY CONVEYOR DIMENSIONS: 14.5 INCHES WIDE X 27 INCHES LONG FILM PERFORATOR LOCKABLE CASTERS

DUAL FLAT BELT PRODUCT CONVEYOR 22" L X 5" W - USED DUAL BELT PRODUCT CONVEYOR WITH: (2) FLAT BLUE BELTS: LENGTH: 22 INCHES WIDTH: 5 INCHES DISCHARGE HEIGHT: 45 INCHES HAND CRANK HEIGHT ADJUSTMENT PUSH BUTTON CONTROLS VARIABLE FREQUENCY DRIVE SEW MOTOR ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3

SKYFOOD CLM-300 TABLETOP DOUGH ROLLER & SHEETER WITH: OUTPUT RATE: UP TO 400 POUNDS PER HOUR ADJUSTABLE OUTPUT DOUGH THICKNESS: MINIMUM: 0.125 INCHES MAXIMUM: 0.375 INCHES MOTOR HORSEPOWER: 0.5 HP ROCKER STYLE FRONT MOUNTED SWITCH ROLLER SIZE: LENGTH: 12 INCHES DIAMETER: 4 INCHES ELECTRICAL REQUIREMENTS: VOLTAGE: 110V FREQUENCY: 60 HERTZ PHASE: 1 STAINLESS STEEL CONTACT PARTS WITH GEAR DRIVEN TRANSMISSION

STAINLESS STEEL ROLLING TOTE BIN 24'L X 24"W X 20"D - USED TOTES WITH: APPROXIMATE CAPACITY: 45 GALLONS FOUR SET-DIRECTION CASTERS RAILS ON SIDES FOR LIFT APPROXIMATE INTERNAL DIMENSIONS: LENGTH: 24 INCHES WIDTH: 24 INCHES DEPTH: 19 INCHES STAINLESS STEEL CONSTRUCTION

HOBART 1712E TWO SPEED STAINLESS AUTOMATIC SLICER - USED HOBART SLICER WITH: ELECTRIC TWO SPEED SINGLE LANE: MAX PRODUCT WIDTH: 12 INCHES OUTPUT RATE: 36 OR 51 STROKES PER MINUTE CIRCULAR BLADE: STAINLESS STEEL DIAMETER: 11.75 INCHES MOTOR HORSEPOWER: 0.5HP ELECTRICAL REQUIREMENTS: VOLTAGE: 115V FREQUENCY: 60 HZ CURRENT: 6.2 AMPS PHASE: 1 STAINLESS STEEL CONSTRUCTION WITH MANUAL SLICE ADJUSTMENT

GLOBE 3850 STAINLESS TWO SPEED AUTOMATIC SLICER WITH: EXTRA BLADES TWO SPEED ONE BLADE 45 GRAVITY-FED INFEED CAPACITY: WIDTH: 10.5 INCHES HEIGHT: 6 INCHES 12 INCH CIRCULAR BLADE MOTOR HORSEPOWER: 0.5HP GEAR DRIVEN, ELECTRIC POWERED OUTPUT RATE: 40 OR 60 STROKES PER MINUTE MAXIMUM SLICE THICKNESS: 1.25 INCHES ELECTRICAL REQUIREMENTS: VOLTAGE: 115VAC FREQUENCY: 60 HERTZ PHASE: 1 CURRENT: 7 AMPS STAINLESS STEEL TABLETOP UNIT WITH TOUCHPAD CONTROLS

FANUC S-420F ROBOTIC ARM AXES: 6 PAYLOAD: 120KG H-REACH: 2413MM REPEATABILITY: 0.02MM ROBOT MASS: 1600KG STRUCTURE: ARTICULATED MOUNTING: FLOOR

STAINLESS STEEL ROLLING TOTE BIN 24'L X 24"W X 20"D - USED TOTES WITH: APPROXIMATE CAPACITY: 45 GALLONS FOUR SET-DIRECTION CASTERS RAILS ON SIDES FOR LIFT APPROXIMATE INTERNAL DIMENSIONS: LENGTH: 24 INCHES WIDTH: 24 INCHES DEPTH: 19 INCHES STAINLESS STEEL CONSTRUCTION

VALLEY FORGE 11' LONG 14" WIDE CLEATED CONVEYOR - 11 LONG 14 WIDE .33 HORSEPOWER BALDOR MOTOR MOUNTED ON CASTERS START/STOP AND VARIABLE SPEED CONTROLS

LITTLE DAVID CF30T CASE ERECTOR BOTTOM TAPER - USED LOVESHAW LITTLE DAVID CASE FORMER MODEL CF30 WITH: OUTPUT: UP TO 10 CASES PER MINUTE MINIMUM CASE DIMENSIONS: LENGTH: 8 INCHES WIDTH: 8 INCHES HEIGHT: 6 INCHES MAXIMUM CASE DIMENSIONS: LENGTH: 18 INCHES WIDTH: 15 INCHES HEIGHT: 15 INCHES BOTTOM TAPER: 3 INCH TAPE HEAD HAND CRANK ADJUSTMENTS PUSH BUTTON CONTROLS CASTERS ELECTRICAL: VOLTS: 120 FREQUENCY: 60 HZ PHASE 3 AIR REQUIREMENTS: 80 PSI

ECONOCORP E2000 AUTOMATIC HORIZONTAL CARTONER WITH: SUITABLE FOR ERECTING, LOADING AND CLOSING END LOAD CARTONS PRODUCTION OUTPUT RATE: UP TO 25 CARTONS PER MINUTE, DEPENDING ON CARTON STYLE MINIMUM CARTON SIZE: LENGTH:1 INCH WIDTH: 0.75 INCHES HEIGHT: 2.5 INCHES MAXIMUM CARTON SIZE: LENGTH:12 INCH WIDTH: 4 INCHES HEIGHT: 12 INCHES ELECTRICALS: VOLTAGE: 220 FREQUENCY: 60 HERTZ PHASE 1 AIR REQUIREMENTS: 3.2 CUBIC FEET PER MINUTE 80 POUNDS PER SQUARE INCH STAINLESS STEEL CONTACT PARTS

TWIN CITY FAN AND BLOWER BAF-S11 BLOWER STEEL WITH: MILD STEEL CONSTRUCTION BACKWARD AIRFOIL FAN SIZE: 17.5 INCH *ESTIMATED MOTOR AND ELECTRICAL DATA*: NO MOTOR TAG MOTOR: 125 HORSEPOWER 1775 ROTATIONS PER MINUTE 231 AMPERAGE FRAME STYLE: 445TS ELECTRICALS: PHASE: 3 VOLTAGE: 460 FREQUENCY: 60 HERTZ

ECONOCORP E2000 AUTOMATIC HORIZONTAL CARTONER WITH: SUITABLE FOR ERECTING, LOADING AND CLOSING END LOAD CARTONS PRODUCTION OUTPUT RATE: UP TO 25 CARTONS PER MINUTE, DEPENDING ON CARTON STYLE MINIMUM CARTON SIZE: LENGTH:1 INCH WIDTH: 0.75 INCHES HEIGHT: 2.5 INCHES MAXIMUM CARTON SIZE: LENGTH:12 INCH WIDTH: 4 INCHES HEIGHT: 12 INCHES ELECTRICALS: VOLTAGE: 220 FREQUENCY: 60 HERTZ PHASE 1 AIR REQUIREMENTS: 3.2 CUBIC FEET PER MINUTE 80 POUNDS PER SQUARE INCH STAINLESS STEEL CONTACT PARTS

TWIN CITY FAN AND BLOWER WITH 50 HORSEPOWER MOTOR WITH: CENTRIFUGAL TYPE MODEL 50 HORSEPOWER SUPER-E BALDOR MOTOR: VOLTAGE: 230/460 VOLTS ELECTRICAL PHASE: 3PH HERTZ: 60HZ AMPERAGE: 118/59 AMPS

WEBER 5200 PRINT APPLY LABELER WITH SATO PRINTER WITH: LEFT HAND OPERATION SATO M-8485SE PRINTHEAD PRINT AREA: 5.1 INCHES WIDE X 6 INCHES LONG BLOW-ON TAMP ARM AND WIPE-ON LABEL APPLICATION CONVEYOR DIMENSIONS: 15 INCHES WIDE X 71 INCHES LONG CONVEYOR HEIGHT: 36 INCHES VARIABLE SPEED CONVEYOR CURRENTLY SET TO PRINT AND APPLY LABELS TO THE SIDES OF RECTANGULAR CASES CASTERS WITH SCREW DOWN LEVELING FEET

SAFELINE 4" DIAMETER GRAVITY METAL DETECTOR - USED SAFELINE GRAVITY METAL DETECTOR WITH: APERTURE DIAMETER: 4.25 INCHES INFEED DIAMETER: 3.75 INCHES INFEED HEIGHT: 56.5 INCHES DISCHARGE HEIGHT: 23 INCHES DISCHARGE DIMENSIONS: 5.5 INCH DIAMETER AND 6.5 INCHES X 3.25 INCHES COWBELL DIVERTER PRODUCT REJECT STANDARD MODULE REJECT CONFIRMATION FREQ: 300 STAG: 2 HARDWARE VERSION: V1 FIRMWARE VERSION: 1.251

LOREN COOK VENTILATING BLOWER WITH 10 HP GE MOTOR WITH: 10 HORSEPOWER MOTOR FLOOR MOUNTING DESIGN PAINTED STEEL CONSTRUCTION CENTRIFUGAL IMPELLER DIRECT DRIVE, BELT DRIVE ELECTRICS: HORSEPOWER: 10 MOTOR RPM: 1760 VOLTS: 230/460 HERTZ: 60 PHASE: 3 AMPERAGE: 24/12

CAPPLUS TECHNOLOGIES S403V 4" DUAL SOFTGEL ENCAPSULATION SYSTEM. 4" DUAL SOFTGEL ENCAPSULATION SYSTEM CAPPLUS S403V SOFTGEL ENCAPSULATION MACHINE. TYPE 4" "DUAL" SPEED RATED UP TO 5 RPM VOLUME RATED UP TO 28,000 PER HOUR (ANIMAL GELATIN) DIE ROLLS 4 DIMENSION 1050MM (H) X 650MM (D) X 1800MM (W) WEIGHT 500KG POWER 220V, 3PH, 60HZ, MAX 3KW REQ. JANGLI 150L GELATIN MELTING / MIXING TANK CHILLING SYSTEM. 2 TUMBLE DRYERS. FILL MATERIAL TRANSFER TANK. STORAGE TANK. HOSES, TUBING, ENCAPSULATOR HARDWARE, DRYING RACKS/DOLLIES.

ID TECHNOLOGY 250 LABELER WITH SATO M-8490SE BARCODE PRINTER LABEL LENGTH: 11 INCHES LABEL HEIGHT: 6 INCHES CONVEYOR DIMENSIONS: 48 INCHES LONG X 11 INCHES WIDE CONVEYOR HEIGHT: 31 INCHES TAMP-ON LABEL APPLICATOR WITH WIPE-ON ARM LEFT TO RIGHT PRODUCT FLOW LABEL REWIND STAND MOUNTED WITH CASTERS

ORION MA33-507 ROTARY ARM STRETCH WRAPPER WITH: FILM WIDTH: 30 INCHES CHAIN CONVEYOR SYSTEM: INFEED, WRAP STATION, AND OUTFEED SECTION CONVEYOR DIMENSIONS: 40 INCHES WIDE X 24 FEET LONG WRAP HEIGHT: 115 INCHES SENSOR FOR DETECTING OBSTRUCTION PRODUCT HEIGHT PHOTO-EYE VARIABLE SPEED CARRIAGE INDEPENDENT TOP AND BOTTOM WRAP COUNT CONTROLS ELECTRIC FILM CLAMP ASSEMBLY PERSONNEL SAFETY CAGE AROUND WRAP STATION

LINCOLN IMPINGER 1130 SINGLE STACK SS OVEN - USED LINCOLN IMPINGER SINGLE STACK SS OVEN WITH: TEMPERATURE RANGE: 250 TO 575 FAHRENHEIT 30 MINUTE COOK TIMER APERTURE: WIDTH: 19 INCHES HEIGHT: 3 INCHES BAKING CHAMBER: WIDTH: 19 INCHES LENGTH: 28 INCHES HEIGHT: 3 INCHES CONVEYOR: WIDTH: 19 INCHES LENGTH: 56 INCHES

LINCOLN IMPINGER 1130 SINGLE STACK SS OVEN - USED LINCOLN IMPINGER SINGLE STACK SS OVEN WITH: TEMPERATURE RANGE: 250 TO 575 FAHRENHEIT 30 MINUTE COOK TIMER APERTURE: WIDTH: 19 INCHES HEIGHT: 3 INCHES BAKING CHAMBER: WIDTH: 19 INCHES LENGTH: 28 INCHES HEIGHT: 3 INCHES CONVEYOR: WIDTH: 19 INCHES LENGTH: 56 INCHES

WEBER 5200 PRINT APPLY LABELER WITH SATO PRINTER WITH: LEFT HAND OPERATION SATO M-8485SE PRINTHEAD PRINT AREA: 5.1 INCHES WIDE X 6 INCHES LONG BLOW-ON TAMP ARM AND WIPE-ON LABEL APPLICATION CONVEYOR DIMENSIONS: 15 INCHES WIDE X 71 INCHES LONG CONVEYOR HEIGHT: 36 INCHES VARIABLE SPEED CONVEYOR CURRENTLY SET TO PRINT AND APPLY LABELS TO THE SIDES OF RECTANGULAR CASES CASTERS WITH SCREW DOWN LEVELING FEET

FOWLER ANDRE ZALKIN CA8 360 NG CAPPER COMPLETE CAPPING MACHINE - LIKE NEW, VERY LOW HOURS. LAST USED FOR PHARMACEUTICAL BOTTLE CAPPING BY "ASTRAZENECA". OEM CHANGE PART IN ORIGINAL PACKAGING. SKIDDED. ALL ELECTRICAL DRAWINGS, FULL MACHINE MANUALS, AND PARTS LISTS ARE INCLUDED IN THE SALE. AVAILABLE IN HARD COPY AND PDF FORMAT. USED PRO MACH-FOWLER-ANDRE ZALKIN CA8 360 NG CAPPER WITH: GENERAL: CAP TRANSFER STARWHEEL WITH POCKETS DRIVEN BY A "CAGE D'ECUREUIL" STARWHEEL VOGEL CENTRALIZED LUBRICATION FESTO PNEUMATIC COMPONENTS DIRECTION OF FEED: LEFT TO RIGHT STAINLESS STEEL MINIMUM SPEED: 2880 BPH MAXIMUM SPEED: 14400 BPH ELECTRICITY: 3 PHASES 480 VOLTS 60 HERTZ CONTROL VOLTAGE: 24 VOLTS CONVEYOR: CHAIN: 4 POUCES HEIGHT SLAT CHAIN LEVEL: 911 MM+/-25MM MAIN CONVEYOR SUPPLIED BY FOWLER CAP DISTRIBUTION: ORIENTOR SUPPLIED BY FOWLER AND IS FOR: CAP 45MM NCR (SCREW) PLASTIC - 51.3 X HT 18.1MM (1 THREAD) CAP 45MM ARGUS LOC (SCREW) PLASTIC - 50.4 X HT 16.3MM (1 THREAD) CAP 45MM FINE RIB (SCREW) PLASTIC - 46.8 X HT 11.2MM (1 THREAD) CAP 45MM PICTORIAL (SCREW) PLASTIC - 51.4 X HT 17.6MM (1 THREAD) CAPPING PARTS: 1 CAP CHUTE FOR 45MM NCR, ARGUS LOC, AND PICTORIAL 1 CAP CHUTE FOR 45MM FINE RIB STARWHEELS FOR ALL TYPES 8 SCREW CAPPING HEADS: BRUSHLESS FOC SE BOTTLE FEED EQUIPMENT SUPPLIED BY FOWLER: BOTTLE SIZES: SQUARE HDPE BOTTLE 200CC 57.4/57.4 X HT 88.1MM SQUARE HDPE BOTTLE 325CC 57.4/57.4 X HT 131MM MISCELLANEOUS: CAPPER SHROUD ASSEMBLY 4 MACHINE LEGS + SCREWS 2 SUPPORTS FOR PHOTOCELLS 1 BELT + 1 PULLEY "STRONGARM" PRODUCT INSPECTION CONTROL PANEL ALSO INCLUDED.

TRIANGLE B2C FORM FILL SEAL VERTICAL BAGGER - USED TRIANGLE B2C VERTICAL FORM FILL SEAL WITH: 21 INCHES BAG FORMER - SEALER HEATED SEAL JAW 12.5 INCH WIDE WITH KNIFE 2 INCHES WIDE X 16 INCHES LONG GUIDE BELTS TWO PACIFIC 1.8 STEP MOTORS BALDOR .2 HORSEPOWER FILM THREADING ELECTRIC MOTOR

RONDO DOGE STAINLESS STEEL DOUGH SHEETER WITH: SAFE AND EASY TO HANDLE PISTON GRIP ALLOWS ADJUSTING THE ROLLERS IN A QUICK AND EASY WAY FINAL THICKNESS TO ENSURE IDENTICAL THICKNESS FOR EVERY PRODUCT STAINLESS STEEL CONSTRUCTION UNIT IS MISSING ONE ROLLER BAR

TOKYO MENKI CO MW-150 STAINLESS STEEL MIXER WITH: DOUGH FEEDER DISCHARGE: WIDTH: 2 FEET LENGTH: 2 FEET CAPACITY: 150 GALLONS INLET: 8 INCH DIAMETER DUAL SHAFT STAINLESS STEEL CONSTRUCTION

METTLER-TOLEDO CM6500GI-CM HI-SPEED CHECKWEIGHER WITH: CONVEYOR BELT WIDTH: 10 INCHES WEIGHING BELT DIMENSIONS: 10 INCHES WIDE X 18 INCHES LONG TOUCH SCREEN CONTROLS WORKING HEIGHT: 33 INCHES LEESON .5 HORSEPOWER MOTOR PREVIOUS APPLICATION: BAGS OF BREAD CRUMBS OVERALL DIMENSIONS: 53 INCHES LONG X 23 INCHES WIDE X 33 INCHES HIGH LEVELING FEET

METTLER-TOLEDO CM6500GI-CM HI-SPEED CHECKWEIGHER WITH: CONVEYOR BELT WIDTH: 10 INCHES WEIGHING BELT DIMENSIONS: 10 INCHES WIDE X 18 INCHES LONG TOUCH SCREEN CONTROLS WORKING HEIGHT: 33 INCHES LEESON .5 HORSEPOWER MOTOR PREVIOUS APPLICATION: BAGS OF BREAD CRUMBS OVERALL DIMENSIONS: 53 INCHES LONG X 23 INCHES WIDE X 33 INCHES HIGH LEVELING FEET

FALLAS AUTOMATION V-400 PICK AND PLACE CASE PACKER WITH: PACKED 18 COUNT BAGS OF PRODUCT IN CASES BAG WEIGHT: 16 AND 14 OUNCES LAYERS PER CASE: 6 PRODUCT DIMENSIONS: WIDTH: 7.5 INCHES HEIGHT: 2 INCHES CASE WIDTH CROSS PUSHER: 15.75 INCHES VACUUM PRESSURE: 4 INCHES OF HG VACUUM HEAD HEIGHT: 1.875 INCHES MAIN AIR SUPPLY REQUIREMENTS: 83-87 PSI ALLEN-BRADLEY CONTROL LOGIX PLC STAINLESS STEEL FRAME PREVIOUSLY USED TO PACK BAGS OF STUFFING

HAYSSEN ULTIMA II 2+2 DUAL LANE VERTICAL BAGGER WITH: SEAL WIDTH: 9 INCHES DUAL BAGGING HEADS FORMING TUBE DIAMETER: 5 INCHES NON REGISTERED FILM ALLEN-BRADLEY PANELVIEW 550 CONTROL PANEL NORWOOD 53LIT DATE CODERS ALLEN-BRADLEY SLC 500 CPU DISCHARGE HEIGHT: 38 INCHES HEATED BAR SEAL JAWS PREVIOUSLY RUNNING WITH ISHIDA SCALE

CHEMTAINER POLY TANK WITH AGITATOR .75 HP BALDOR MOTOR - .75 HP BALDOR MOTOR, POLY TANK

CHEMTAINER POLY TANK WITH AGITATOR .75 HP BALDOR MOTOR - POLY TANK, .75 HP BALDOR MOTOR, LIGHTNIN AGITATOR

UNIVERSAL BLOWER 4506 DURAFLOW BLOWER 40 HORSEPOWER MOTOR S/N: 13031F18 NOISE DAMPENER PAINTED STEEL CONSTRUCTION US MOTOR WITH 40 HORSEPOWER

STEEL CONVEYOR 12 INCH WIDE X 15 FOOT LONG - USED 12 INCH WIDE X 15 FOOT LONG STEEL CONVEYOR WITH: CONVEYOR DIMENSIONS: 12 INCHES WIDE X 184 INCHES LONG WIRE CENTERS: .5 INCHES INFEED HEIGHT: 16 INCHES OUTFEED HEIGHT: 34.5 INCHES .5 HORSEPOWER MOTOR

JOBSMART TA-25100VB AIR COMPRESSOR - 3-WIRE MAX AMB.TEMP.TEMP.AMB.MAX/TEMP.AMB:MAX: 40 DEG C/ 104 DEG F MIN AMB.TEMP/TEMP.AMB.MIN/TEMB.AMB.MIN: O DEN C / 32 DEG F TANK SIZE/CAPACITE RESERVOIR/CAPACIDAD DEPOSITO: 26 GAL (98,4L) PRESS. MAX PRESS.DE SERVICE/MAY PRES TRABAJO: 0-125 PSI (0-861, 8KPA) AIR DELIVERY /AIR ASPIRE/IRE ASPIRADO: 5.0 SCFM (141,58 LPM) @ 40 PS/ (275, 8 KPA) 4.0 SCFM(113,27 LPM) @ 90 PS(620, 5 KPA)

WESTWARD 3JR85D 13 GAL 125 PSI AIR COMPRESSOR - 5.5 @ 90 PSI 4.9 @ 125 PSI 125 PSI MAX

SPEEDAIRE 1NNF4B 13 GAL 125 PSI AIR COMPRESSOR - RATINGS / CLASSE / CLASSIFICACION 5.5 SCFM@ 90 PSI PER IS01217 2.0 RUNNING HP PER IS01217 135 PSI MAX 13 GALLON 0,16 M3/MIN- A 621 KPA NORME IS01217 2,0 HP DE MARCHE NORME IS01217 931 KPA MAX 49,2 L 0,16 M3/MIN- A 6,21 BAR ESTANDAR IS01217 2,0 PONTENCIA TRABAJO DE HP ESTANDAR IS01217 9,31 BAR MAX 49,2 L

LABEL-AIRE C2710 LABEL APPLICATOR WITH CONVEYOR - CONVEYOR DIMS: 6 LONG 6 WIDE VARIABLE SPEED CONTROL MANUAL INCLUDED MOUNTED ON CASTERS

2017 ECONOSEAL 10234 AUTOMATIC HORIZONTAL END LOAD CARTONER 220 VOLTS 60 HERTZ 1 PHASE 25 AMPS REQUIRES AIR: 5.5 BAR, MANUAL AND SPARE PARTS INCLUDED S/N: 10641

LANTECH LAN-WRAPPER V-SERIES HIGH PROFILE STRETCH WRAPPER - 4 X 4 TURNTABLE, BALDOR MOTORS, 115 VOLTS, 60 HERTZ, 20 AMPS

AUTOMOTION INC. CASE BELT CONVEYOR 354" LONG X 21" WIDE - 354 LONG X 21 WIDE, CENTER DRIVE BELT, 2 HORSEPOWER BALDOR MOTOR, ADJUSTABLE HEIGHT, STEEL CONSTRUCTION

FAM CHD-3D INDUSTRIAL HARD CHEESE CUTTER STACKER S/N: 002071 USED FOR DICING AND STRIP CUTTING CAPACITY: 3,200 KILOGRAMS PER HOUR CUTTING SIZES: 3 MILLIMETERS TO 38.1 MILLIMETERS SUITABLE FOR CUTTING FROZEN MEAT AND CHEESE STAINLESS STEEL CONSTRUCTION

SUNSET SC 600 GALLON STAINLESS STEEL INSULATED HORIZONTAL TANK S/N: B-3068 CAPACITY: 600 GALLONS INSULATED: FIBERGLASS TOP MOUNTED MANWAY: 20 INCH DIAMETER