250 Lot Food Processing and Packaging Equipment Dealer Inventory Reduction Sale Fruit Processing Cooking Cooling Kettles Processors More
Category: FOOD PROCESSING AND RESTAURANT EQUIPMENT
Total Lots:
307
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
2018 | JBT | STD ATMOS COOLER |
2018 JBT STD ATMOS COOLER ROTARY ATMOSPHERIC CAN COOLER, SET FOR 300 X 407 CAN SIZE, 1739 CAN CAPACITY LARGE SHAFT, STAINLESS STEEL TEE'S AND ANGLES, 58-5/16" DIAMETER X 20' LONG SHELL S/N: 3447-157-17
|
🔒 Subscribe |
|
|
ROSSI CATELLI | P100/6R |
ROSSI CATELLI TURBO JUICE EXTRACTOR -PULPER MODEL P100/6R, 100 HP -1185 RPM DRIVE MOTOR, WITH PNEUMATIC SLIDE GATE VALVE, WASTE DISCHARGE CHUTE, HEAVY DUTY STAINLESS STEEL ON MILD STEEL SUPPORT FRAME, SWITCH PANEL, 6" DIAMETER BOTTOM DISCHARGE S/N: 9667
|
🔒 Subscribe | |
|
|
1999 | AEROGLIDE | 1999-C3-24-18RSX |
1999 AEROGLIDE STEAM DRYER MODEL #1999-C3-24-18RSX S/N: 99-052-02, WITH ALLEN-BRADLEY PANELVIEW PLUS HMI, ALLEN-BRADLEY COMPACT LOGIX 5380, ETHERNET/IP WITH (7) I/O CARDS, (5) POWERFLEX 525 VARIABLE-FREQUENCY DRIVES, SOLA POWER SUPPLY AND ENCLOSURE, DIMENSIONS = 20' X 6' X 9' BELT OPENING 1/8I W X 5/8I LONG, WITH A STAINLESS STEEL 24" WIDE X 18'LONG BELT, BUILT FOR A CEREAL PRODUCERIS R&D LAB, UNIT HAS THREE CONVEYORS,(TRIPLE PASS) IS STEAM HEATED AND DOESNIT HAVE A COOLER, THIS PROBABLY WOULD BE MORE SUITED TO BREAKFAST CEREAL, AND SNACKS (POSSIBLY PET FOOD TOO), UNIT HAS VERY LIGHT HOURS, VERY NICE USED CONDITION!
|
🔒 Subscribe |
|
|
FENCO - BERTOCCHI | DT 800 |
FENCO - BERTOCCHI MODEL DT 800 PULPER, RATED AT 1-200 TON/ HOUR CAPACITY, APPROX.18" X 21" OD FINISHING CHAMBER, WITH 60HP/ 52KW -380/460 VOLT DRIVE MOTOR, WITH TUBULAR STAINLESS STEEL SUPPORT FRAME. (NOTE: NON-OPERATIONAL, NEED MECHANICAL ATTENTION, ROTARY SCREEN AND CAGES ARE REMOVED BEFORE SENT-SEE PHOTO OF SCREEN/CAGE/ AND ROTOR)
|
🔒 Subscribe | |
|
|
2014 | PHARMA PACK | PP-08MFG |
2014 PHARMA PACK PP-08MFG PILL COUNTER S/N: P1434476, 220V - 50/60HZ -32 KW, BRAND NEW UNIT, STILL ON SKID
|
🔒 Subscribe |
|
|
L&A PROCESS SYSTEM INC | 40 TON DUAL COIL ROTARY HOT BREAK |
L&A PROCESS SYSTEM INC 40 TON DUAL COIL ROTARY HOT BREAK (ALL DIMS PROVIDED ARE APPROXIMATE)
|
🔒 Subscribe | |
|
|
CRYO QUICK AIR PRODUCTS | NITROGEN FREEZE SPRAY TUNNEL |
CRYO QUICK AIR PRODUCTS NITROGEN FREEZE SPRAY TUNNEL STAINLESS STEEL WIRE MESH BELT, (2) TOP FANS, STAINLESS STEEL CONSTRUCTION, 48" WIDE BELT, 2" CLEARANCE WITH GUARD, 6" OVERALL CLEARANCE, 11' TUNNEL LENGTH, 36" INFEED 20" DISCHARGE, NO CONTROL PANEL (ALL DIMS PROVIDED ARE APPROXIMATE) (STOCK# 4213)
|
🔒 Subscribe | |
|
|
ABCO | BLANCHER |
ABCO BLANCHER, GREAT FOR GREEN BEANS, BRUSSEL SPROUTS, OR OTHER VEGGIES. ALL STAINLESS STEEL CONSTRUCTION RATE: 25,000 POUNDS PER HOUR ELECTRIC DRIVE DOES NOT COME WITH HEAT AND HOLD CONVEYOR. LAST TIME IN OPERATION SUMMER 2020. PREVIOUSLY USED TO BLANCH GREEN BEANS
|
🔒 Subscribe | |
|
|
WAUKESHA / CHERRY-BURRELL | 323 |
WAUKESHA / CHERRY-BURRELL POSITIVE DISPLACEMENT PUMP MODEL 323, STAINLESS STEEL CONTACT, 6" X 6" FLANGED IN / OUTLET, 40 HP 1760 RPM SEVERE DUTY GEAR DRIVE MOTOR, MISSING (2) STAINLESS STEEL IMPELLERS, SKID MOUNTED ON A HEAVY DUTY STAINLESS STEEL STAND (ANY DIMENSIONS PROVIDED ARE APPROX) S/N: 23554-13
|
🔒 Subscribe | |
|
|
WAUKESHA-CHERRY-BURRELL | 323 |
WAUKESHA-CHERRY-BURRELL MODEL 323 POSITIVE DISPLACEMENT PUMP, ASEPTIC PUMP WITH STEAM TRACING, STAINLESS STEEL CONTACT, 6" X 6" FLANGED IN / OUT, DOUBLE LOBE IMPELLERS, HYDRAULIC MOTOR, SCISSOR LIFT MOUNT
|
🔒 Subscribe | |
|
|
GROSSI | HYDRAULIC BIN DUMPER |
GROSSI HYDRAULIC BIN DUMPER HYDRAULIC CONTROL, MILD STEEL CONSTRUCTION, BIN DUMPER SPECS 51" W X 44" D X 68" H, 162" OVERALL HEIGHT AND HAS A 35" DISCHARGE HEIGHT FROM, GROUND TO THE BOTTOM OF DISCHARGE CHUTE
|
🔒 Subscribe | |
|
|
2006 | SRS | SR1010 |
2006 SRS SR1010 CLARIFIER STAINLESS STEEL CON | SRS CLARIFIER, MODEL SR1010, SERIAL NO WS123SE1026FP, MFG 2006, STAINLESS STEEL CONTACT, WITH 5.5 HP, MOTOR, WITH STAINLESS STEEL RECTANGULAR FEED TANK, 39'' WIDE X 82'' LONG X 5' DEEP, WITH (2) ROSEDALE CANISTER TYPE POLISHING FILTERS, CONTROL PANEL, SKID MOUNTED SYSTEM, WAS CLARIFYING OLIVE OIL & JUICE (ANY DIMENSIONS PROVIDED ARE APPROX) (STOCK# 2814) S/N: WS123SE1026FP
|
🔒 Subscribe |
|
|
SOUTH VALLEY THERMASCREW | COOKER / CHILLER |
SOUTH VALLEY THERMASCREW COOKER / CHILLER, STAINLESS STEEL CONSTRUCTION AND CONTACT, 6' DIAMETER X 30' LONG, STAINLESS STEEL CRADLE MOUNTED, TOP MAN WALK, 17.5" WIDE OUTFEED INCLINE CONVEYOR WITH A 11" DISCHARGE CHUTE, (MISSING THE BELT FOR THE CONVEYOR)! WITH (5) CENTRIFUGAL WATER PUMPS, LAST USED TO CHILL FOR BAGGED SAUCES (ANY DIMENSIONS PROVIDED ARE APPROX) S/N: 5167-09
|
🔒 Subscribe | |
|
|
NOWICKI | BRINE SYSTEM |
[NOWICKI BRINE SYSTEM] BRINE INJECTOR WITH BRINE FILTER SYSTEM MTH 293 AND FBN 293 HIGH SPEED INJECTION HEAD IN TIME (UP TO 60 CYCLES PER MINUTE), SERVO- DRIVE SYSTEM FOR INJECTION HEAD AND CONVEYOR BELT, PNEUMATIC AID SYSTEM FOR NEEDLES, TOUCH SCREEN CONTROL PANEL, ADJUSTMENT OF INJECTION HEAD STROKE FROM 40 TO 210 MM, ADJUSTMENT OF NEEDLES MOVEMENT AND VALVES OPENING /CLOSING, SMOOTH ADJUSTMENT OF BRINE PRESSURE, AUTO DIAGNOSTIC SYSTEM, CONTINUOUS TEMP MONITORING, INJECTION VOLUME 5 TO 100% OF MEAT VOLUME, ADJUSTABLE CONVEYOR SPEED 21: 42: 84, NUMBER OF STROKES PER MINUTE 20-60, NUMBER OF NEEDLES 293, BRINE INJECTION FILTRATION SYSTEM, VOLTAGE FREQUENCY 460VOLTS -3 PH - 60 HZ, POWER INSTALLED 17KW, 25 HP,, BRINE INJECTION FILTRATION SYSTEM,,, FILTER WITH REPLACEABLE CARTRIDGES' WITH DIFFERENT GRADUATIONS, CURTAIN FILTER, CONSISTING OF 3 GRIDS WITH DIFFERENT GRADUATIONS, ROTARY FILTER WITH A SLOT DRUM FOR A VERY FINE CLEANING OF RETURN, CONTAINER CAPACITY 320 LITERS,(85 GALLONS), POWER INSTALLED 1.0 KW / 1.5 HP, VOLTAGE FREQUENCY 460VOLTS- 3 PH - 60 HZ
|
🔒 Subscribe | |
|
|
FMC | 112 PVS |
[FMC MODEL 112 PVS FILLER (PRE -VACUUMIZING SYRUPER), 12 VALVE, SET FOR 603 X 700 CA] FMC MODEL 112 PVS FILLER (PRE -VACUUMIZING SYRUPER), 12 VALVE, SET FOR 603 X 700 CAN SIZE, SERIAL NO 7012-10-60, RIGHT TO LEFT FEED, COUNTER-CLOCKWISE ROTATION, WITH CHAIN INFEED CONVEYOR TO WORM/STAR INFEED, NO -CAN NO-FILL DEVICE, TURRET DISCHARGE, MILD STEEL BASE, NO DRIVE, MISSING TRAP TANK ASSEMBLY (ALL DIMS PROVIDED ARE APPROXIMATE)
|
🔒 Subscribe | |
|
|
FEMCO | SINGLE EFFECT EVAPORATOR |
FEMCO SINGLE EFFECT EVAPORATOR, RATED 5,000 LBS / HR WATER REMOVAL, STAINLESS STEEL, NATURAL CIRCULATION, STEAM CHEST, SEPARATOR TANK, CONDENSER WITH ENTRAINMENT SEPARATOR, VACUUM PUMP AND CENTRIFUGAL REMOVAL PUMP
|
🔒 Subscribe | |
|
|
DOUGLAS | DRUM WASHER |
DOUGLAS DRUM WASHER (NO TAG) 4' LONG X 34" WIDE X 8 HIGH OVERALL HEIGHT, 480 VOLTS - 3 PHASE-60 HZ / 32 AMP
|
🔒 Subscribe | |
|
|
HMI/ HEINZEN | XB36X60 |
HMI/ HEINZEN DEWATERING SHAKER - DOUBLE SIDED PARABOLIC SCREEN WITH RECOVERY TANK XB36X60 (ALL DIMS PROVIDED ARE APPROXIMATE)
|
🔒 Subscribe | |
|
|
1980 | L&A PROCESS SYSTEM INC | 10-15 TON ROTARY COIL HOT BREAK |
1980 L&A PROCESS SYSTEM INC 10-15 TON ROTARY COIL HOT BREAK RATED 10-15 TONS PER / HR, STAINLESS STEEL COIL, RECTANGULAR U-BOTTOM TANK, 4" OUTLET, 3 HP BELT DRIVE MOTOR (ALL DIMS PROVIDED ARE APPROXIMATE) S/N: 33554
|
🔒 Subscribe |
|
|
250 GALLON STAINLESS STEEL CHOPPER TANK WITH 3 HP AGITATION MOTOR -1750 RPM WITH STAINLESS STEEL FEED CHUTE, TANK IS APPROX.48" DIA, X 35" HIGH SIDES, WITH INTERNAL STAINLESS STEEL BAFFLE - MIX, BLADES WHITE PAINTED EXTERIOR, PORTABLE UNITS WITH HEAVY DUTY CASTER WHEELS
|
🔒 Subscribe | |||
|
|
FRISTAM | FKL 600 |
[FRISTAM FKL 600] 7" X 7" HIGH PRESSURE POSITIVE DISPLACEMENT PUMP, 7" X 7" FLANGED IN/OUTLET, STAINLESS STEEL CONTACT, HIGH PRESSURE PUMP, WITH A 125 HP -1775 RPM - 230/460 VOLT DRIVE MOTOR, MOUNTED ON A HEAVY DUTY STAINLESS STEEL SKID-STAND (ANY DIMENSIONS PROVIDED ARE APPROX) (STOCK# 5006)
|
🔒 Subscribe | |
|
|
1992 | LEE | 500 A7S |
1992 LEE 500 A7S 500 GALLON STAINLESS STEEL MIXING KETTLE, NON JACKETED, 60" DIAMETER X 57" DEEP, SICKLE TYPE FULL SWEEP AGITATOR, TOP MOUNT INCLINE AGITATOR DRIVE, 7.5 HP -1720 RPM 230/460V DRIVE MOTOR, 7" CENTER BOTTOM OUTLET, PNEUMATIC CONTROLLED SLIDE GATE DISCHARGE DOUBLE HINGED TOP LID (ANY DIMENSIONS PROVIDED ARE APPROX) S/N: 86971-A6
|
🔒 Subscribe |
|
|
1992 | LEE | 500 A7S |
1992 LEE 500 A7S MIXING KETTLE, 500 GALLON, NON JACKETED, 60" DIAMETER X 57" DEEP, SICKLE TYPE FULL SWEEP AGITATOR, TOP MOUNT INCLINE AGITATOR DRIVE, 7.5 HP -1720 RPM 230/460V DRIVE MOTOR, 7" CENTER BOTTOM OUTLET, PNEUMATIC CONTROLLED SLIDE GATE DISCHARGE DOUBLE HINGED TOP LID
|
🔒 Subscribe |
|
|
1982 | CLEAVER BROOKS | M4S-2500 |
1982 CLEAVER BROOKS BOILER, MODEL # M4S-2500, SERIAL # G-14736-M4, SERIES 100, 60 HP, OIL FIRED, MAX INPUT 2,500,000 BTU/HR, MAX OUTPUT 2,000,000 BTU/HR, HEATING SURFACE 130 SQ. FT, 480 VOLTS 60 HZ, (TWO PANEL COVERS MISSING) (ANY DIMENSIONS PROVIDED ARE APPROX) (STOCK# 4269)
|
🔒 Subscribe |
|
|
URSCHEL | MODEL W |
URSCHEL MODEL W FRENCH-STYLE BEAN SLICER
|
🔒 Subscribe | |
|
|
1992 | LEE | 500 A7S |
1992 LEE 500 A7S MIXING KETTLE, 500 GALLON, NON JACKETED, 60" DIAMETER X 57" DEEP, SICKLE TYPE FULL SWEEP AGITATOR, TOP MOUNT INCLINE AGITATOR DRIVE, 7.5 HP - 1720 RPM 230 / 460V DRIVE MOTOR, 7" CENTER BOTTOM OUTLET, PNEUMATIC CONTROLLED SLIDE GATE DISCHARGE DOUBLE HINGED TOP LID, MOUNTED ON 6' STAINLESS STEEL LEGS (ANY DIMENSIONS PROVIDED ARE APPROX) S/N: B6971-A5
|
🔒 Subscribe |
|
|
1991 | LEE | 500 A7S |
1991 LEE 500 A7S MIXING KETTLE, NON JACKETED, 60" DIAMETER X 57" DEEP, SICKLE TYPE FULL SWEEP AGITATOR, TOP MOUNT INCLINE AGITATOR DRIVE, 7.5 HP - 1720 RPM 230 / 460V DRIVE MOTOR, 7" CENTER BOTTOM OUTLET, PNEUMATIC CONTROLLED SLIDE GATE DISCHARGE DOUBLE HINGED TOP LID, MOUNTED ON 6' STAINLESS STEEL LEGS S/N: B5921-A5
|
🔒 Subscribe |
|
|
TRIANGLE | TZ-2 |
TRIANGLE VERTICAL SINGLE TUBE FORM, FILL & SEAL BAGGER & SCALE PACKAGE, MODEL TZ-2, SERIAL NO 119394, 230 VOLTS- 1 PH WITH CONTROL PANEL, WITH ALLEN BRADLEY 7- SLOT PLC, WITH BRADLEY ALLEN PANEL VIEW 500 DISPLAY, WITH ZIPPER SYSTEM, (5) ASSORTED SIZE FORMING TUBES,, TRIANGLE SELECTACOM 21 STAINLESS STEEL COMBINATION SCALE MODEL A612H, SERIAL NO 11675, WITH STAINLESS STEEL CONTACT- BUCKETS AND STAINLESS STEEL FUNNEL INFEED, WITH MILD STEEL FRAME (ANY DIMENSIONS PROVIDED ARE APPROX) (STOCK# 4686)
|
🔒 Subscribe | |
|
|
SPROUT WALDRON | DM24 |
SPROUT WALDRON KOPPERS MILL, MODEL DM24 24" PRIMARY PEANUT BUTTER MILL, KOPPERS SCREW FEEDER, SERIAL NO 85-157A, STAINLESS STEEL CONTACT, 10" X 10" FLANGED INLET, 9" DIAMETER AUGER FEED SCREW, 14" X 8" BOTTOM DISCHARGE OUTLET, MILL HAS AN APPROX, 50 HP DRIVE MOTOR, KOPPERS IN-FEEDER IS POWERED BY A 1HP DRIVE MOTOR, APPROX, OUTPUT: 5000 TO 6000 LBS / HR, LAST USED AT A PEANUT PLANT
|
🔒 Subscribe | |
|
|
STERICO | AFP 10 A |
STERICO GLYCOL CHILLER FOR BRINE SYSTEM MODEL AFP 10 A WITH 10 HP | COMPRESSOR / 1 HP, PROCESS PUMP / 1 HP, FAN, MIN TEMP 30* F / MAX TEMP 65*F, TYPE R-22 REFRIGERANT, MADE IN THE USA! (ALL DIMS PROVIDED ARE APPROXIMATE) S/N: 94E256
|
🔒 Subscribe | |
|
|
2008 | NOWICKI | MHM-68/204M |
2008 NOWICKI BRINE INJECTOR MODEL MHM-68/204M MODEL MHM-68/204M MADE IN POLAND (ALL DIMS PROVIDED ARE APPROXIMATE) S/N: 3108023
|
🔒 Subscribe |
|
|
2008 | BEST IXUS | IXUS JAR 1000 S |
2008 BEST IXUS IXUS JAR 1000 S X-RAY JAR/BOTTLE INSPECTOR, WITH INFEED & DISCHARGE CONVEYOR, WITH TRANSFORMER, NO CHILLER INCLUDED S/N: 1X-135
|
🔒 Subscribe |
|
|
FRESH TEC | WASH TANK SYSTEM |
FRESH TEC STAINLESS STEEL WASH TANK SYSTEM, 43" WIDE X APPROX, 12' LONG RADIUS BOTTOM WASH TANK, WITH A CONNECTED 36" LONG SHAKER DISCHARGE AND, (4) CENTRIFUGAL CIRCULATION PUMPS (ANY DIMENSIONS PROVIDED ARE APPROX)
|
🔒 Subscribe | |
|
|
CHICAGO DREIS & KRUMP | 75TON X 10FT MECHANICAL PRESS BRAKE |
CHICAGO DREIS & KRUMP 75TON X 10FT MECHANICAL PRESS BRAKE IN GOOD WORKING CONDITION, WITH A LARGE ASSORTMENT OF FORMING DIES, DIMENSIONS: 9' TALL X 78" DEEP X 12' WIDE
|
🔒 Subscribe | |
|
|
CHICAGO DREIS & KRUMP | 410D |
CHICAGO DREIS & KRUMP MECHANICAL PRESS BRAKE 410D, 90TON X 12' WIDE, 12' X 10 GAUGE CAPACITY, OVERALL WEIGHT APPROX, 26,000 LBS (ANY DIMENSIONS PROVIDED ARE APPROX) S/N: P7632
|
🔒 Subscribe | |
|
|
VALLEY WELDING MACHINE WORKS | PIT REMOVAL SORTING TABLE |
VALLEY WELDING MACHINE WORKS PIT REMOVAL SORTING TABLE WITH APPROX, 40" WIDE X 90" LONG X 7' HIGH FLAT TOP MODULAR PLASTIC BELT, STAINLESS STEEL TUBULAR, FRAME SUPPORT, CENTER DIVERTER, DISCHARGE CHUTES, WITH A 3/4 HP -1700 RPM DRIVE MOTOR, WITH A BOTTOM DISCHARGE DRAIN CHUTE (ALL DIMS PROVIDED ARE APPROXIMATE) (STOCK# 4303)
|
🔒 Subscribe | |
|
|
FMC | 3 AR |
FMC MODEL 3 AR CORN CUTTER STAINLESS STEEL CONTACT, WITH STAINLESS STEEL INFEED CHAIN, STAINLESS STEEL CUTTING HEADS /KNIVES, MILD STEEL SUPPORT STAND, 1.5 HP -220/ 460 VOLT BELT DRIVE MOTOR, POWER- CORD PLUG IN, WITH START/STOP SWITCH PANEL, HAND FEED -RATED UP TO 125 EARS A MINUTE (ALL DIMS PROVIDED ARE APPROXIMATE) (STOCK# 4230)
|
🔒 Subscribe | |
|
|
WAUKESHA | 130 |
WAUKESHA MODEL 130 POSITIVE DISPLACEMENT PUMP, SERIAL NO, 20859 SS, STAINLESS STEEL, WITH 3" SANITARY THREAD, INLET/OUTLET, WITH (2) STAINLESS STEEL DOUBLE-LOBE IMPELLERS, WITH, 10 HP -1760 RPM - 230/460 VOLT DIRECT DRIVE MOTOR, MILD STEEL BASE MOUNTED (ANY DIMENSIONS PROVIDED ARE APPROX) (STOCK# 3793)
|
🔒 Subscribe | |
|
|
KAPS-ALL | AU6C |
KAPS-ALL MODEL AU6C STAINLESS STEEL ORIENTAINER - BOTTLE UNSCRAMBLER, WITH STAINLESS STEEL HOPPER, WITH ELEVATOR, 48" SORTING DRUM ORIENTAINER, ON A CARBON STEEL SQUARE TUBE FRAME AND ANALOG CONTROLS, MISSING FRONT SLIDING PLEXI-GLASS GUARDS. S/N: 4527
|
🔒 Subscribe | |
|
|
1986 | GROEN | TA-125 |
1986 GROEN TA-125 125 GALLON JACKETED AGITATED PRESSURE KETTLE S/N: 130319, 90PSI RATED, TYPE 316 STAINLESS STEEL, NATIONAL BOARD NO 130319, HINGED TOP COVER WITH BOLTED CLAMPS, HYDRAULIC CYLINDERS WITH 5HP POWER PACK FOR COVER OPENING, (2) SIGHT GLASSES ON COVER, SAFETY POP OFF VALVE, 2 1/2'' SANITARY THREAD OUTLET WITH VALVE, (2) TOP MOUNTED AGITATOR VARI DRIVE MOTORS, MISSING AGITATORS
|
🔒 Subscribe |
|
|
AK ROBINS | 4' DIAMETER X 16' LONG HOT WATER ROTARY BLANCHER |
AK ROBINS 4' DIAMETER X 16' LONG HOT WATER ROTARY BLANCHER, STAINLESS STEEL CONTACT, HOPPER INFEED, ROTARY REEL WITH 1/8'' HOLE PERFORATIONS, FERRIS WHEEL TO AUGER DISCHARGE, AUGER HAS APPROX, 1HP MOTOR, REEL HAS 1 HP 1750RPM 230/460V DRIVE MOTOR, (2) AUTOMATIC STEAM VALVE, MILD STEEL SUPPORT STAND
|
🔒 Subscribe | |
|
|
URSCHEL | MODEL J |
[URSCHEL MODEL J DICER] STAINLESS STEEL CONSTRUCTION, WITH 11'' WIDE PRODUCT FEED BELT, WITH 5 HP,-230/460 VOLT MOTOR, WITH START/STOP PANEL WITH POWER CORD PLUG-IN, SET UP WITH 3/8" CUTTING BLADES, FOR STRIP CUTS,, NEED TO ADD A CROSS CUT BLADE TO DO A 3/8" DICE (ANY DIMENSIONS PROVIDED ARE APPROX) S/N: 778
|
🔒 Subscribe | |
|
|
PROCTOR & SCHWARTZ | TRAY DRYER |
PROCTOR & SCHWARTZ TRAY DRYER, PRODUCT CODE 062, ORDER NO K21441, SINGLE DOOR WITH 30" WIDE X 40" DEEP WITH (10) TRAY RACKS, STEAM FIRED UNIT, WITH SIEMENS CONTROL, TEMP GAUGES, OVER ALL DIMENSIONS 103" WIDE X 54" DEEP X 83" HIGH, HAS SOME DRYING TRAYS IN IT THAT ARE INCLUDED, R&D STYLE UNIT (ANY DIMENSIONS PROVIDED ARE APPROX)
|
🔒 Subscribe | |
|
|
PROCTOR & SCHWARTZ | TRAY DRYER |
PROCTOR & SCHWARTZ TRAY DRYER, PRODUCT CODE 062, ORDER NO K21441, SINGLE DOOR WITH 30" WIDE X 40" DEEP WITH (10) TRAY RACKS, STEAM FIRED UNIT, WITH SIEMENS CONTROL, TEMP GAUGES, OVER ALL DIMENSIONS 103" WIDE X 54" DEEP X 83" HIGH, HAS SOME DRYING TRAYS IN IT THAT ARE INCLUDED, R&D STYLE UNIT (ANY DIMENSIONS PROVIDED ARE APPROX)
|
🔒 Subscribe | |
|
|
KALAMAZOO | 1220-W |
[KALAMAZOO METAL CUTTING BAND SAW MODEL 1220-W S/N: LU1716, MAIN MOTOR: 1-1/2 HP 3PH, 20 A, 250V, PUMP MOTOR: 115V 60HZ 1.1 A, 1 PH, RECTANGLE: 8" X 12", ROUND: 8", BLADE SPEEDS: (4) 56-100-160-255 FPM, EQUIPPED WITH A QUICK ACTING VISE, MINIMAL FLOOR SPACE NEEDED FOR INSTALL: 91" X 66", DIMENSIONS: 88" L X 43" W X 43" H, WEIGHT: 1600 LBS (ALL DIMS PROVIDED ARE APPROXIMATE)]
|
🔒 Subscribe | |
|
|
FRAN RICA | 564-174 |
[1400 GALLON CAPACITY] FRAN RICA STAINLESS STEEL HORIZONTAL TOMATO PULP STORAGE TANK, MODEL 564-174, APPROX, 6' DIAMETER X 7' LONG, WITH (1) PNEUMATIC, KNIFE GATE VALVES DISCHARGE CONTROL, 15 HP DRIVE PULP AGITATOR, TOP MANWAY, STAINLESS STEEL TUBULAR FRAME LEGS SUPPORT (ANY DIMENSIONS PROVIDED ARE APPROX) (STOCK# 4681)
|
🔒 Subscribe | |
|
|
APV | PLATE HEAT EXCHANGER |
APV PLATE HEAT EXCHANGER WITH HEAT SET, WITH 3 SECTIONS, WITH 125 16'' W X 60'' HIGH STAINLESS STEEL PLATES, 3'' TRI CLAMP INLET / OUTLET, WITH MILD STEEL FRAME S/N: 1768
|
🔒 Subscribe | |
|
|
1990 | L&A PROCESS SYSTEM INC | 10-15 TON ROTARY COIL HOT BREAK |
1990 L&A PROCESS SYSTEM INC 10-15 TON ROTARY COIL HOT BREAK RATED 10-15 TONS PER / HR, STAINLESS STEEL COIL, RECTANGULAR U-BOTTOM TANK, 4" OUTLET, 3 HP BELT DRIVE MOTOR, TYPE 316 STAINLESS STEEL S/N: 10132
|
🔒 Subscribe |
|
|
FRAN RICA | 564-474 |
FRAN RICA STAINLESS STEEL HORIZONTAL TOMATO PULP STORAGE TANK, MODEL 564-474, 1400 GALLON CAPACITY, APPROX, 6' DIAMETER X 7' LONG, WITH (3) PNEUMATIC, KNIFE GATE VALVES DISCHARGE CONTROL, 15 HP DRIVE PULP AGITATOR, TOP MANWAY, STAINLESS STEEL TUBULAR FRAME LEGS SUPPORT
|
🔒 Subscribe | |
|
|
DUAL JACKETED STAINLESS STEEL KNEADING / MALAXOR TANKS, WITH GRINDER AT INFEED WITH 30 HP-3450 RPM MOTOR, DUAL TANKS 24'' WIDE X 48'' LONG, 3'' OUTLET TO A MOYNO TYPE PUMP, WITH APPROX, 1/2 HP MIXER MOTORS, FOR OLIVE OIL PRODUCTION
|
🔒 Subscribe |
2018 JBT STD ATMOS COOLER
2018 JBT STD ATMOS COOLER ROTARY ATMOSPHERIC CAN COOLER, SET FOR 300 X 407 CAN SIZE, 1739 CAN CAPACI...
ROSSI CATELLI P100/6R
ROSSI CATELLI TURBO JUICE EXTRACTOR -PULPER MODEL P100/6R, 100 HP -1185 RPM DRIVE MOTOR, WITH PNEUMA...
1999 AEROGLIDE 1999-C3-24-18RSX
1999 AEROGLIDE STEAM DRYER MODEL #1999-C3-24-18RSX S/N: 99-052-02, WITH ALLEN-BRADLEY PANELVIEW PLUS...
FENCO - BERTOCCHI DT 800
FENCO - BERTOCCHI MODEL DT 800 PULPER, RATED AT 1-200 TON/ HOUR CAPACITY, APPROX.18" X 21" OD FINISH...
2014 PHARMA PACK PP-08MFG
2014 PHARMA PACK PP-08MFG PILL COUNTER S/N: P1434476, 220V - 50/60HZ -32 KW, BRAND NEW UNIT, STILL O...
L&A PROCESS SYSTEM INC 40 TON DUAL COIL ROTARY HOT BREAK
L&A PROCESS SYSTEM INC 40 TON DUAL COIL ROTARY HOT BREAK (ALL DIMS PROVIDED ARE APPROXIMATE)...
CRYO QUICK AIR PRODUCTS NITROGEN FREEZE SPRAY TUNNEL
CRYO QUICK AIR PRODUCTS NITROGEN FREEZE SPRAY TUNNEL STAINLESS STEEL WIRE MESH BELT, (2) TOP FANS, ...
ABCO BLANCHER
ABCO BLANCHER, GREAT FOR GREEN BEANS, BRUSSEL SPROUTS, OR OTHER VEGGIES. ALL STAINLESS STEEL CONSTRU...
WAUKESHA / CHERRY-BURRELL 323
WAUKESHA / CHERRY-BURRELL POSITIVE DISPLACEMENT PUMP MODEL 323, STAINLESS STEEL CONTACT, 6" X 6" FLA...
WAUKESHA-CHERRY-BURRELL 323
WAUKESHA-CHERRY-BURRELL MODEL 323 POSITIVE DISPLACEMENT PUMP, ASEPTIC PUMP WITH STEAM TRACING, STAIN...
GROSSI HYDRAULIC BIN DUMPER
GROSSI HYDRAULIC BIN DUMPER HYDRAULIC CONTROL, MILD STEEL CONSTRUCTION, BIN DUMPER SPECS 51" W X 44"...
2006 SRS SR1010
2006 SRS SR1010 CLARIFIER STAINLESS STEEL CON | SRS CLARIFIER, MODEL SR1010, SERIAL NO WS123SE1026FP...
SOUTH VALLEY THERMASCREW COOKER / CHILLER
SOUTH VALLEY THERMASCREW COOKER / CHILLER, STAINLESS STEEL CONSTRUCTION AND CONTACT, 6' DIAMETER X 3...
NOWICKI BRINE SYSTEM
[NOWICKI BRINE SYSTEM] BRINE INJECTOR WITH BRINE FILTER SYSTEM MTH 293 AND FBN 293 HIGH SPEED INJECT...
FMC 112 PVS
[FMC MODEL 112 PVS FILLER (PRE -VACUUMIZING SYRUPER), 12 VALVE, SET FOR 603 X 700 CA] FMC MODEL 112 ...
FEMCO SINGLE EFFECT EVAPORATOR
FEMCO SINGLE EFFECT EVAPORATOR, RATED 5,000 LBS / HR WATER REMOVAL, STAINLESS STEEL, NATURAL CIRCULA...
DOUGLAS DRUM WASHER
DOUGLAS DRUM WASHER (NO TAG) 4' LONG X 34" WIDE X 8 HIGH OVERALL HEIGHT, 480 VOLTS - 3 PHASE-60 HZ /...
HMI/ HEINZEN XB36X60
HMI/ HEINZEN DEWATERING SHAKER - DOUBLE SIDED PARABOLIC SCREEN WITH RECOVERY TANK XB36X60 (ALL DIMS...
1980 L&A PROCESS SYSTEM INC 10-15 TON ROTARY COIL HOT BREAK
1980 L&A PROCESS SYSTEM INC 10-15 TON ROTARY COIL HOT BREAK RATED 10-15 TONS PER / HR, STAINLESS STE...
250 GALLON STAINLESS STEEL CHOPPER TANK WITH 3 HP AGITATION MOTOR -1750 RPM WITH STAINLESS STEEL FEE
FRISTAM FKL 600
[FRISTAM FKL 600] 7" X 7" HIGH PRESSURE POSITIVE DISPLACEMENT PUMP, 7" X 7" FLANGED IN/OUTLET, STAIN...
1992 LEE 500 A7S
1992 LEE 500 A7S 500 GALLON STAINLESS STEEL MIXING KETTLE, NON JACKETED, 60" DIAMETER X 57" DEEP, SI...
1992 LEE 500 A7S
1992 LEE 500 A7S MIXING KETTLE, 500 GALLON, NON JACKETED, 60" DIAMETER X 57" DEEP, SICKLE TYPE FULL ...
1982 CLEAVER BROOKS M4S-2500
1982 CLEAVER BROOKS BOILER, MODEL # M4S-2500, SERIAL # G-14736-M4, SERIES 100, 60 HP, OIL FIRED, MAX...
URSCHEL MODEL W
URSCHEL MODEL W FRENCH-STYLE BEAN SLICER...
1992 LEE 500 A7S
1992 LEE 500 A7S MIXING KETTLE, 500 GALLON, NON JACKETED, 60" DIAMETER X 57" DEEP, SICKLE TYPE FULL ...
1991 LEE 500 A7S
1991 LEE 500 A7S MIXING KETTLE, NON JACKETED, 60" DIAMETER X 57" DEEP, SICKLE TYPE FULL SWEEP AGITAT...
TRIANGLE TZ-2
TRIANGLE VERTICAL SINGLE TUBE FORM, FILL & SEAL BAGGER & SCALE PACKAGE, MODEL TZ-2, SERIAL NO 11939...
SPROUT WALDRON DM24
SPROUT WALDRON KOPPERS MILL, MODEL DM24 24" PRIMARY PEANUT BUTTER MILL, KOPPERS SCREW FEEDER, SERIAL...
STERICO AFP 10 A
STERICO GLYCOL CHILLER FOR BRINE SYSTEM MODEL AFP 10 A WITH 10 HP | COMPRESSOR / 1 HP, PROCESS PUMP...
2008 NOWICKI MHM-68/204M
2008 NOWICKI BRINE INJECTOR MODEL MHM-68/204M MODEL MHM-68/204M MADE IN POLAND (ALL DIMS PROVIDED AR...
2008 BEST IXUS IXUS JAR 1000 S
2008 BEST IXUS IXUS JAR 1000 S X-RAY JAR/BOTTLE INSPECTOR, WITH INFEED & DISCHARGE CONVEYOR, WITH TR...
FRESH TEC WASH TANK SYSTEM
FRESH TEC STAINLESS STEEL WASH TANK SYSTEM, 43" WIDE X APPROX, 12' LONG RADIUS BOTTOM WASH TANK, WIT...
CHICAGO DREIS & KRUMP 75TON X 10FT MECHANICAL PRESS BRAKE
CHICAGO DREIS & KRUMP 75TON X 10FT MECHANICAL PRESS BRAKE IN GOOD WORKING CONDITION, WITH A LARGE AS...
CHICAGO DREIS & KRUMP 410D
CHICAGO DREIS & KRUMP MECHANICAL PRESS BRAKE 410D, 90TON X 12' WIDE, 12' X 10 GAUGE CAPACITY, OVERAL...
VALLEY WELDING MACHINE WORKS PIT REMOVAL SORTING TABLE
VALLEY WELDING MACHINE WORKS PIT REMOVAL SORTING TABLE WITH APPROX, 40" WIDE X 90" LONG X 7' HIGH FL...
FMC 3 AR
FMC MODEL 3 AR CORN CUTTER STAINLESS STEEL CONTACT, WITH STAINLESS STEEL INFEED CHAIN, STAINLESS STE...
WAUKESHA 130
WAUKESHA MODEL 130 POSITIVE DISPLACEMENT PUMP, SERIAL NO, 20859 SS, STAINLESS STEEL, WITH 3" SANITAR...
KAPS-ALL AU6C
KAPS-ALL MODEL AU6C STAINLESS STEEL ORIENTAINER - BOTTLE UNSCRAMBLER, WITH STAINLESS STEEL HOPPER, W...
1986 GROEN TA-125
1986 GROEN TA-125 125 GALLON JACKETED AGITATED PRESSURE KETTLE S/N: 130319, 90PSI RATED, TYPE 316 ST...
AK ROBINS 4' DIAMETER X 16' LONG HOT WATER ROTARY BLANCHER
AK ROBINS 4' DIAMETER X 16' LONG HOT WATER ROTARY BLANCHER, STAINLESS STEEL CONTACT, HOPPER INFEED, ...
URSCHEL MODEL J
[URSCHEL MODEL J DICER] STAINLESS STEEL CONSTRUCTION, WITH 11'' WIDE PRODUCT FEED BELT, WITH 5 HP,-2...
PROCTOR & SCHWARTZ TRAY DRYER
PROCTOR & SCHWARTZ TRAY DRYER, PRODUCT CODE 062, ORDER NO K21441, SINGLE DOOR WITH 30" WIDE X 40" DE...
PROCTOR & SCHWARTZ TRAY DRYER
PROCTOR & SCHWARTZ TRAY DRYER, PRODUCT CODE 062, ORDER NO K21441, SINGLE DOOR WITH 30" WIDE X 40" DE...
KALAMAZOO 1220-W
[KALAMAZOO METAL CUTTING BAND SAW MODEL 1220-W S/N: LU1716, MAIN MOTOR: 1-1/2 HP 3PH, 20 A, 250V, PU...
FRAN RICA 564-174
[1400 GALLON CAPACITY] FRAN RICA STAINLESS STEEL HORIZONTAL TOMATO PULP STORAGE TANK, MODEL 564-174,...
APV PLATE HEAT EXCHANGER
APV PLATE HEAT EXCHANGER WITH HEAT SET, WITH 3 SECTIONS, WITH 125 16'' W X 60'' HIGH STAINLESS STEE...
1990 L&A PROCESS SYSTEM INC 10-15 TON ROTARY COIL HOT BREAK
1990 L&A PROCESS SYSTEM INC 10-15 TON ROTARY COIL HOT BREAK RATED 10-15 TONS PER / HR, STAINLESS STE...
FRAN RICA 564-474
FRAN RICA STAINLESS STEEL HORIZONTAL TOMATO PULP STORAGE TANK, MODEL 564-474, 1400 GALLON CAPACITY, ...
DUAL JACKETED STAINLESS STEEL KNEADING / MALAXOR TANKS, WITH GRINDER AT INFEED WITH 30 HP-3450 RPM M