Surplus CNC Fabrication Industrial Equipment Multiple Locations

2012 VISION WIDE NF-5223 TOTAL RUN TIME IS 2016H, 25M, 17SEC. MACHINE TRAVELS AND DIMENSIONS PARAMETER SPECIFICATION X-AXIS TRAVEL 204.7" (5,200 MM) Y-AXIS TRAVEL 81" (2,057 MM) OR 90.6" (2,300 MM) OPTIONAL Z-AXIS TRAVEL 36.2" (920 MM) STANDARD; UP TO 39.4" (1,000 MM) OPTIONAL DISTANCE BETWEEN COLUMNS 94.5" (2,400 MM) SPINDLE NOSE TO TABLE 4"40.2" (1001,020 MM) SPINDLE CENTER TO COLUMN 17.9" (455 MM) MACHINE HEIGHT APPROX. 142" (3,600 MM) MACHINE FOOTPRINT (LW) APPROX. 315" 177" (8,000 4,500 MM). TABLE SPECIFICATIONS PARAMETER SPECIFICATION TABLE SIZE 80.7" 196.9" (2,050 5,000 MM) MAX. TABLE LOAD 44,000 LBS (20,000 KG) T-SLOTS 5 SLOTS, 0.87" (22 MM) WIDTH, 11.8" (300 MM) SPACING. SPINDLE AND DRIVE SYSTEM PARAMETER SPECIFICATION SPINDLE SPEED 6,000 RPM 2 SPEED GEAR BOX 35HP SPINDLE SPINDLE TAPER CT50 SPINDLE MOTOR POWER 24.8 HP (18.5 KW) CONTINUOUS; 29.5 HP (22 KW) 30-MIN RATED; UP TO 49.6 HP (37 KW) OPTIONAL RAPID TRAVERSE (X/Y/Z) 492 IPM (12.5 M/MIN) X/Y; 590 IPM (15 M/MIN) Z FEED RATE (CUTTING) 1394 IPM (110,000 MM/MIN). TOOL CHANGER (ATC) PARAMETER SPECIFICATION TOOL CAPACITY 40 TOOLS STANDARD TOOL SHANK BT50 OR CT50 MAX. TOOL DIAMETER 5.5" (140 MM) ADJACENT; 8.7" (220 MM) WITH ONE EMPTY MAX. TOOL LENGTH 15.7" (400 MM) MAX. TOOL WEIGHT 44 LBS (20 KG) TOOL CHANGE TIME 3.5 SEC (TOOL-TO-TOOL). CONTROL SYSTEM STANDARD CONTROL: FANUC 0I-MD (OR 0I-MF VARIANT) WITH 3-AXIS SIMULTANEOUS CONTROL, ABSOLUTE PULSE CODER FEEDBACK ON X/Y/Z AXES, AND VISION WIDE FX GRAPHICAL USER INTERFACE. KEY FEATURES: -RJ45 ETHERNET INTERFACE FOR NETWORKING. -MANUAL PULSE GENERATOR (3-AXIS INDEPENDENT, FANUC-SPECIFIC). -AUTO POWER-OFF AND SPINDLE OVERLOAD PROTECTION VIA SOFTWARE. -OPTIONAL: LINEAR SCALE FEEDBACK FOR XYZ AXES, THERMAL COMPENSATION (STC), AUTO WARM-UP, AND 4TH-AXIS INTERFACE. POSITIONING ACCURACY: 0.0002" (0.005 MM/300 MM) PER JIS B6333 STANDARD. REPEATABILITY: 0.00008" (0.002 MM). ADDITIONAL FEATURES AND ACCESSORIES (TYPICAL FOR THIS MODEL) COOLING: THROUGH-SPINDLE COOLANT (UP TO 355 PSI/24 BAR), SPINDLE OIL CHILLER. STRUCTURE: ROLLER LINEAR GUIDEWAYS ON X/Y, BOX WAYS ON Z; DUAL BALL-SCREWS ON Z OPTIONAL FOR HEAVIER LOADS. SAFETY/CONVENIENCE: CHIP CONVEYOR, FULL ENCLOSURE, WORK LIGHT, V-TEC 90 INDEXING HEAD (OPTIONAL FOR 5-FACE MACHINING). POWER REQUIREMENTS: 3-PHASE, 200/220/380/415/440/460/480 V, 50/60 HZ; APPROX. 60 KVA. MACHINE WEIGHT: APPROX. 48,500 LBS (22,000 KG). ADDITIONAL OPTIONS -ONE (1) 2 AXIS AC HEAD OPTION 1 DEGREE C AXIS AND 5-DEGREE A AXIS (HEAD POSITIONING VIA MACHINE CONTROL PROGRAM) -THREE (3) TABLE STANDS; (1) FOR THE 2-AXIS HEAD, (1) FOR A COVER FOR THE 2-AXIS HEAD. WHEN THE 2-AXIS HEAD IS NOT IN USE AND SITTING IN A PARK STAND AND (1) FOR THE DUST COVER -ONE (1) FACTORY TO INSTALL AN ANTI-ROTATION STOP BLOCK FOR A NIKKEN MULTIPLIER HOLDER -ONE (1) STANDARD DUAL SIDE AUGERS AND REAR MOUNTED CHIP CONVEYOR -ONE (1) RENISHAW TS27 PART PROBE -RENISHAW OMP60 SPINDLE PROBE -ONE (1) 300 PSI THRU SPINDLE COOLANT -ONE (1) FANUC 31IM CONTROL UPGRADE (REQUIRED FOR ATC AUTO CHANGE WHEN IN THE VERTICAL POSITION OF 2 AXIS AC HEAD)

2022 OKUMA MB-5000HII 500MM HORIZONTAL MACHINING CENTER TRAVEL: X AXIS 29.92 IN Y AXIS 29.92 IN Z AXIS 31.89 IN. PALLET SIZE 19.69 IN X 19.69 IN MAX LOAD 1,100 LB SPINDLE SPEED 15,000 RPM 25 HP 48 TOOL CAPACITY 30,140 LBS CONTROL OKUMA OSP-P300MA EQUIPPED WITH: HIGH PRESSURE COOLANT SYSTEM CHIP CONVEYOR

2023 DOOSAN PUMA V8300L VTL - 24 INCH CHUCK, CHIP CONVEYOR FANUC OI-PLUS CONTROL LNS CHIP CONVEYOR X AXIS 19.5 IN Z AXIS 31 IN SPINDLE SPEED 2000 RPM SPINDLE HP 50 SHANK BMT-KEY TURRET STATIONS 12 SLOT BORING BAR DIAMETER 2.5 IN MAX TURNING DIAMETER 32.7 IN MAX TURING LENGTH 29.5 IN MAX TABLE LOAD 1918 LBS SPINDLE TO TABLE DISTANCE 44.8 IN 79X113X143 20,720 LBS

2018 PIRANHA PRECISION CNC PRESS BRAKE 280 TON X 13' WITH 6 AXIS BACK GUAGE, DELEM 3D CONTROLS. TONNAGE: 280 TON. MAX BENDING LENGTH: 13'. STROKE: 8.5". # AXIS: 6. APPROX. DIMENSIONS: 197" L X 83" W X 110" H. APPROX. WEIGHT: 37200 LBS. CONTROL: DELEM DA-66T CNC CONTROL.

2021 WARDJET X-2040 WATERJET TABLE WIDTH: 6.6' TABLE LENGTH: 13.1' CONTROL: WADJET XL PUMP: 50 HP MAX CUTTING PRESSURE: 60,000 PSI POWER REQUIREMENT: 230/3/60 X-Y CUTTING AREA: 80" X 157.2" FOOTPRINT: 9.4' X 17.8' EQUIPPED WITH: 4400 LB PRESSURIZED SMART BULK FEED HOPPER 50 HP HYPERTHERM P-50 INTENSIFIER PUMP APEX 60 5-AXIS CUTTING HEAD BALLSCREW IN ALL AXES PNEUMATIC DRILL ATTACHMENT SMART-REMOVE ABRASIVE REMOVAL SYSTEM WARDCAM SOFTWARE

2017 OKUMA 2SP-250H TWIN SPINDLE TWIN TURRET CNC LATHE - ROBOT LOADER, CHIP CONVEYOR, TRANSFORMER. MAX TURNING DIAMETER: 8.66 INCH MAX TURNING LENGTH: 5.91 INCH TRAVEL X-AXIS: 5.91 INCH Z-AXIS: 6.10 INCH SPEED RANGE: 50-4500 RPM TURRET TYPE: V12 NC MOTOR SPINDLE DRIVE: 15/10 HP EQUIPPED WITH: OKUMA OSP-P300LA CONTROL ROBOT LOADER CHIP CONVEYOR TRANSFORMER 220/480, 3 PHASE, 60 HZ, 55.1 KVA, FULL LOAD CURRENT 144.7 / 66.3 A, LARGEST MOTOR RATING 48 A, INTERRUPTING CAPACITY 30 / 10 KA, SCCR OF CONTROL PANEL 10 KA MACHINE POWERED ON WITHOUT ANY MAJOR ALARMS HAD TO SET THE COOLANT LOW INPUT AND AIR PSI INPUT IN ORDER TO MOVE THE AXIS. MACHINE HAD A BATTERY LIFE ALARM DUE TO BEING OUT OF SERVICE, BACKUPS PERFORMED MACHINE HAD A BROKEN LOAD CABLE TRACK ON TOP AND WAS MISSING THE CHUCKS R-L SIDE. MACHINE IS EQUIPPED WITH AIR KNIFE AND ONE WAS BROKEN. AXIS AND SPINDLES OPERATE NORMALLY. LOADER AXIS OPERATE NORMALLY. MACHINE WAS TEST WITHOUT STOCKER TABLE INSTALLED AND APPEARS THAT WHEN IT WAS IN OPERATION THE PARTS WERE PLACED ON A CONVEYOR. INBOUND OUTBOUND.

2019 HAAS ST-30 CNC TURNING CENTER CAPACITIES CHUCK SIZE: 10.0 IN (A2-6) MAXIMUM PART SWING: 21.0 IN (533 MM) MAX CUTTING DIAMETER (BOT TURRET): 15.00 IN (381 MM) MAX CUTTING DIAMETER (BMT65): 13.75 IN (349 MM) BAR CAPACITY: 3.00 IN (76 MM) BETWEEN CENTERS / MAX CUTTING LENGTH: 32.5 IN (826 MM) AXIS TRAVELS X-AXIS TRAVEL: 9.40 IN (239 MM) Z-AXIS TRAVEL: 32.50 IN (826 MM) SPINDLE MAX SPINDLE POWER: 30 HP (22.4 KW) MAX SPEED: 3400 RPM (STANDARD) SPINDLE NOSE: A2-6 SPINDLE BORE: 3.50 IN (88.9 MM) MAX TORQUE: ~300 FT-LB @ 500 RPM (407 NM) OPTIONAL GEARBOX TORQUE: ~1000 FT-LB @ 150 RPM (1356 NM) TURRET & TOOLS TURRET TYPE: 12-STATION BOT TURRET FEEDRATES RAPID X: ~945 IPM (24 M/MIN) RAPID Z: ~945 IPM (24 M/MIN) GENERAL COOLANT CAPACITY: ~55 GAL (208 L) AIR REQUIREMENTS: ~4 SCFM @ 100 PSI (113 L/MIN @ 6.9 BAR) MACHINE WEIGHT: ~10,900 LB (4940 KG) TYPICAL FOOTPRINT: ~151 L 70 W 79 H (WITHOUT CONVEYOR)

2020 WEINIG VALURIP RIPMAX RIP SAW AUTOMATIC INFEED. 17 POINTS OF WIDTH MEASUREMENT FOR BASIC SHAPE DETECTION. INDUSTRIAL PC WITH ERGONOMIC, TOUCH SCREEN. TIMBERMAX OPTIMIZING/TALLY SOFTWARE, BASED ON SHAPE OPTIMIZING. SYSTEM WILL AUTOMATICALLY POSITION FENCE AND MOVING BLADES APPROPRIATE TO THE SOLUTION. MOVING LASERS DISPLAY RIP SOLUTION PRIOR TO RIPPING. 10-14 AVERAGE NUMBER OF BOARDS PROCESSED PER MINUTE BY THE OPERATOR. NOTE: THIS IS BASED ON 10 FT. BOARDS WITH NO OVERRIDES.

2024 ELUMATEC SBZ 628 S CNC PROFILE MACHINING CENTER - 8 AXIS, LIKE NEW. STATE-OF-THE-ART, FULLY AUTOMATED CNC PROFILE MACHINING CENTER DESIGNED FOR HIGH-SPEED PROCESSING OF ALUMINUM, PVC, AND THIN-WALLED STEEL PROFILES. ENGINEERED FOR FABRICATION OF WINDOW, DOOR, AND CURTAIN WALL COMPONENTS. DELIVERS EXCEPTIONAL THROUGHPUT WITH UNMATCHED PRECISION. WITH 8-AXIS CONTROL, DUAL INDEPENDENT PROCESSING ZONES, AND INTEGRATED SAW AND TOOL STATIONS, THE SBZ 628 S PROVIDES END-TO-END MACHINING INCLUDING MILLING, DRILLING, NOTCHING, ROUTING, AND SAWING WITHOUT MANUAL REPOSITIONING. MAX. PROFILE CROSS-SECTION (WXH) 200 X 160 / 160 X 200 MM MIN. PROFILE CROSS-SECTION 30 X 10 MM BLANK BAR LENGTH 7,600 MM FINISHED PART LENGTH 350-4,600 MM. FEED MAGAZINE: SHORTEST BLANK BAR LENGTH 3,000 MM NUMBER OF SWING ARMS 5 (OPTION FOR 9) MOUNTING POSITIONS 10 (ABOVE 120 MM 5). INFEED: SERVO DRIVE LINEAR MOTORIZED GRIPPER ADJUSTMENT Y/Z GRIPPER ROTATION OPTIONAL RESIDUAL PIECE MEASUREMENT. RESIDUAL PIECE PROCESSING MANUAL FEEDING < 3,000. MACHINING STATION: AXES 4 ROUTER SPINDLES 4 (SERVO-ASSISTED). SAW: AXES 2 SAW BLADES (DIAMETER) 1 (650 MM) SAWING ANGLES 45 - 135 (PIVOTING). OUTFEED CONVEYOR: LIFTING STATION YES NUMBER OF SWING ARMS 8 OUTFEED CONVEYOR WIDTH (OPTIONS) 4,000 MM.

2021 DESKTOP METAL P-1 INDUSTRIAL 3D PRINTER - BINDER JET TECHNOLOGY FOR METAL PARTS - BUILD ENVELOPE 200X100X40 MM BUILD VOLUME 0.8L MAX RESOLUTION (Z) 0.05MM PROCESS BINDING JETTING UNI-DIRECTIONAL PRINT DIRECTION BINDER JETTING MODULE 2 PIEZO-ELECTRIC PRINTHEADS, 4,096 NOZZLES CHAMBER ENVIRONMENT CDA OR NITROGEN INERTING MATERIALS GOLD, ALUMINUM, COPPER, INCOMES, SILVER, STEEL, TITANIUM AND TUNGSTEN DIMENSION 1770X2007X1150 MM WEIGHT 900 KG

2023 THIBAUT T4 MONOBLOC TC625 BRIDGE SAW MINIMUM DISC DIAMETER : 300 MM, 11.8 MAXIMUM DISC DIAMETER : 650 MM, 25.6 BORE DIAMETER : 60 MM, 2.36 FLANGE DIAMETER : 187 MM, 7.36 X STROKE : 3970 MM, 156.3 Y STROKE : 2300 / 3700 MM, 90.55 / 145.6 Z STROKE : 500 MM, 19.6 MAXIMUM THICKNESS : 200 MM, 8 SPINDLE POWER : 13.2 KW (S6), 17.4 HP (S6), 88 NM, 779 LBF.IN SPINDLE SPEED : 0 6000 WATER SUPPLY : 25 L/MIN, 6.6 GAL (US)/MIN AIR SUPPLY : 200 L/MIN > 6 BARS MINI, 53 GAL (US)/MIN > 87 PSI POWER SUPPLY : 28.5 KW / 37.5 HP, 400 480 V, 50 60 HZ TABLE DIMENSIONS : 3600 X 2000 MM, 141.7 X 78.7 ALL-IN DIMENSIONS : 6310 X 4770 X 3260 MM, 248.5 X 187.8 X 128.3 WEIGHT : 7700 KG

DOUGLAS AXIOM-IM CASE AND TRAY PACKER. DAIRY PLANT EQUIPMENT FOR PACKING YOGURT CUPS. FEATURES A 6-LANE INFEED WITH 2 PICK AND PLACE HEADS FOR PACKING 2 CASES AT ONCE OR 1 CASE WITH A DOUBLE LAYER. INCLUDES NUMEROUS SPARE PARTS AND CHANGE PARTS: GEARBOXES, SERVO MOTORS, DIFFERENT PICK HEADS, AND DRIVE BELTS. DATA PLATE AND ELECTRICAL PANEL SHOWN.

2005 HAAS VF-4D; 10K RPM; AUGER X-AXIS TRAVEL 50" Y-AXIS TRAVEL 20" Z-AXIS TRAVEL 25" SPINDLE SPEED 10,000 RPM SPINDLE TAPER CAT 40 TOOL MAGAZINE CAPACITY 20 ATC CONTROL HAAS CNC EQUIPPED WITH: CHIP REMOVAL CHIP AUGER PROGRAMMABLE COOLANT

125 TON AMADA FBD1253NT CNC HYDRAULIC PRESS BRAKE S/N:12533206

KOMATSU FG25T-12 FORKLIFT; 5,000 LBS. CAPACITY

ORANGE PHOTONICS EQUIPMENT LIGHTLAB 3 CANNABIS ANALYZER ARRIVES CALIBRATED AND READY TO RUN SAMPLES. QUANTITATIVE ANALYSIS DOWN TO 0.5% FOR THC-A, 9-THC, TOTAL THC, CBD-A, CBD, AND TOTAL CBD. CBG-A, CBG, AND CBN. ALL ACCESSORIES REQUIRED FOR FLOWER SAMPLE ANALYSIS ARE INCLUDED: SAMPLE SHAKER, PORTABLE SCALE, SAMPLE GRINDER, COMPLIMENTARY FLOWER TEST KIT (SOLVENT, VIALS, SYRINGES, AND COLUMN INCLUDED FOR 25 TESTS.) ADDITIONAL MODULE OPTIONS AVAILABLE: HEMP COMPLIANCE MODULE (QUANTIFY TO 0.05% THC, FOR USDA AND GLOBAL- REGULATED HEMP LIMIT SCREENING.), MINORS MODULE (QUANTIFY CBN-A, CBC-A, CBC, 8-THC, AND 10-THC ADDITIONALLY), TERPENES MODULE (CURRENTLY SEMI-QUANTITATIVE ONLY)

SCREW AUGER BLANCHER AND MIXER WITH STEAM INJECTION MODEL: MTST-34-080-P CAPACITY: 985 GAL S/N: 078490

2022 DOOSAN BER40S-9 RIDE ON PALLET TRUCK, 488 HOURS, 8000 LB CAPACITY, 96 INCH FORKS, AC DRIVE SYSTEM, 24 VOLT SYSTEM, ORIGINAL BATTERY, TRUCK WEIGHS 1700 LBS, BATTERY WEIGHS 995 LBS, TOTAL WEIGHT 2695 LBS. S/N:

2021 QUINCY 15 HP QGS15D T120 ROTARY SCREW AIR COMPRESSOR WITH DRYER. COMPRESSOR TYPE: OILINJECTED ROTARY SCREW. HORSEPOWER: 15 HP. AIR DELIVERY: ~55 ACFM @ 125 PSI. PRESSURE RATING: 125 PSI. DUTY CYCLE: 100% CONTINUOUS. DRIVE TYPE: BELT DRIVE WITH VBELT AND AUTOTENSIONER. MOTOR TYPE: TEFC ELECTRIC MOTOR. TANK: 120 GALLON HORIZONTAL RECEIVER. AFTERCOOLER: AIRCOOLED AFTERCOOLER. LUBRICATION: PREMIUM SYNTHETIC FLUID (8,000 HR SERVICE LIFE). NOISE LEVEL: ~6669 DBA. DIMENSIONS (APPROX): STANDARD QGS FOOTPRINT (~76 26 58). WEIGHT (APPROX): ~620700 LBS. POWER REQUIREMENT: 208230/460 V 3PHASE. EQUIPPED WITH INTEGRATED DRYING SYSTEM, OILINJECTED TWIN SCREW PUMP, TEFC ELECTRIC MOTOR, INTEGRATED AIR RECEIVER TANK, AIRCOOLED AFTERCOOLER, VBELT DRIVE WITH AUTOTENSIONER, ELECTRONIC CONTROLS, ALL AVAILABLE MANUALS.

2005 HAAS SL-30 CNC LATHE; TAILSTOCK; PRESETTER; 30HP VECTOR DUAL DRIVE; PARTS CATCHER MAX TURNING DIAMETER: 17.0 MAX TURNING LENGTH: 26.2 MAX BAR CAPACITY: 3.0 SWING OVER BED: 30.0 X AXIS TRAVEL: 11.3 Z AXIS TRAVEL: 34.0 RAPID TRAVERSE X AXIS: 710 IPM RAPID TRAVERSE Z AXIS: 710 IPM CHUCK SIZE: 10 SPINDLE NOSE: A2-6 SPINDLE BORE: 3.50 SPINDLE SPEED: 0 - 3400 RPM SPINDLE MOTOR: 30 HP TURRET CAPACITY: 12 STATIONS TURRET INDEX TIME: 1 SECOND POWER: 208/230 V; 3 PH; 50/60 HZ OVERALL DIMENSIONS: 137 X 76 X 79 HIGH WEIGHT: 16,000 LBS EQUIPPED WITH: HAAS CNC CONTROL 12 STATION TURRET 10 3-JAW CHUCK 30 HP VECTOR DRIVE RIGID TAPPING TOOL PRESETTER PARTS CATCHER

2 HEAD KEG WASHER - WASHES UP TO 30 KEGS/HR CAPACITY BASED ON DEFAULT CYCLE TIMES - MICRO MATIC COUPLERS (MANUAL CONNECTION) - FITS ANY SIZE KEG AND SPEAR - POWERFUL, YET VIRTUALLY SILENT PUMPS - TOUCH SCREEN OPERATOR INTERFACE (PLC) PROGRAM ALLOWS FULLY ADJUSTABLE CYCLE TIMING, COMPRESSED AIR AND CO2 REGULATION - ONE HEATED CHEMICAL TANK WITH INDEPENDENT TEMPERATURE CONTROLS - ONE NON-HEATED CHEMICAL TANK - SANITARY STAINLESS STEEL CONTACT COMPONENTS AND PROCESS PIPING - AUTOMATIC SENSOR THAT DETECTS WHEN KEGS ARE EMPTY BETWEEN CYCLES - INCLUDES 25' CORD (12AWG/4), NEMA L15-30 PLUG INCLUDED FOR 3PHASE ONLY - 208V 3 PHASE 22 FLA

2008 HAAS TM-3P; TABLE SIZE- 14.5 X 57.75 NUMBER OF T SLOTS- (3) MAXIMUM TABLE LOAD- 1,000 LBS. TRAVELS X AXIS- 40 Y AXIS- 20 Z AXIS- 16 MAX FEED RATES- 200 I.P.M. MINIMUM / MAXIMUM DISTANCE / SPINDLE NOSE TO TOP OF TABLE- 4 20 SPINDLE TAPER- CAT 40 SPINDLE SPEED RANGE- 0 6,000 R.P.M. TOOL CHANGER CAPACITY- (20) TOOLS MAX TOOL DIAMETER- 3.5 MAX TOOL WEIGHT- 12 LBS. S/N: 1068927

ADCO SLEEVER BUILT FOR A GEORGIA PACIFIC PLANT. INCLUDES CHANGE PARTS, INFEED CONVEYOR, PICK AND PLACE FANUC ROBOT WITH CONTROL HEAD AND MACHINE DATA PLATE.

HAAS HRT210H S/N: 220332

2022 QUINCY QGS 7.5 HP ROTARY SCREW AIR COMPRESSOR WITH INTEGRATED DRYER. COMPRESSOR TYPE: OIL-INJECTED ROTARY SCREW. HORSEPOWER: 7.5 HP. AIR DELIVERY: ~2830 ACFM @ 125 PSI. PRESSURE RATING: 125 PSI. DUTY CYCLE: 100% CONTINUOUS. DRIVE TYPE: DIRECT / BELT DRIVE (MODEL DEPENDENT). MOTOR TYPE: TEFC ELECTRIC MOTOR. INTEGRATED DRYER: YES. LUBRICATION: PREMIUM SYNTHETIC FLUID. NOISE LEVEL: ~66 DBA (APPROX). WEIGHT: 500 LBS (APPROX). DIMENSIONS: ~60 X 24 X 48 INCH (APPROX). POWER REQUIREMENT: 208-230/460 V 3-PHASE. EQUIPPED WITH INTEGRATED DRYING SYSTEM, OIL-INJECTED TWIN SCREW PUMP, TEFC ELECTRIC MOTOR, AIR-COOLED AFTERCOOLER, ELECTRONIC CONTROLS, ALL AVAILABLE MANUALS.

SPIRAL PRESS & DEWATERING SYSTEM- MODEL-400 SPECIFICATION WEIGHT: 7000 LBS DIMENSION: 14.8 FT X 3.3 FT X 6.6 FT POWER: 30 KW VOLTAGE: 480V AMP: 30 FEED/HOUR: 5 TON OR 15 M3 MESH DENSITY: 0.75 MM MOTOR RPM: 1440 GRADE: STEEL WEIGHT (KG): 3200 WEIGHT (LBS): 7050 DIMENSION (MM): 4500 X 1000 X 2003 DIMENSION (M): 4.5 X 1 X 2 DIMENSION (INCH): 177.17 X 39.37 X 78.74 DIMENSION (FEET): 14.76 X 3.28 X 6.56 INPUT/HOUR (CUBIC M): 8-10 INPUT/HOUR (GALLON): 2113-2641 INPUT/HOUR (TON): 5 VOLTAGE: 480V POWER: 30KW RPM: 20 MOTOR: 3176 REDUCTION GEARS: 15674 MESH: 30000 SPRING: 100 STAINLESS SPRING: 300 SCREW: 31500 CONE PLATE: 5000 THRUST BEARING: 420 POWER BOX: 780

SPIRAL PRESS & DEWATERING SYSTEM- MODEL-200 SPECIFICATION WEIGHT: 1500 LBS DIMENSION: 8.5 FT X 2.6 FT X 4.6 FT POWER: 7.5 KW VOLTAGE: 480V AMP: 30 FEED/HOUR: 0.5 TON OR 5 M3 MESH DENSITY: 0.75 MM MOTOR RPM: 1440 GRADE: STAINLESS WEIGHT (KG): 680 WEIGHT (LBS): 1500 DIMENSION (MM): 2586 X 770 X 1400 DIMENSION (M): 2.6 X 0.8 X 1.4 DIMENSION (INCH): 102.36 X 31.50 X 55.12 DIMENSION (FEET): 8.53 X 2.62 X 4.59 INPUT/HOUR (CUBIC M): 1-2 INPUT/HOUR (GALLON): 265-528 INPUT/HOUR (TON): 1 VOLTAGE: 480V POWER: 7.5KW RPM: 30 MOTOR: 1134 REDUCTION GEARS: 4700 MESH: 4500 SPRING: 20 STAINLESS SPRING: 70 SCREW: 8750 CONE PLATE: 1200 THRUST BEARING: 58 POWER BOX: 350

2000 HAAS SL-30T CNC TURNING CENTER CAPACITY MAX SWING OVER APRON: 30" MAX TURNING DIAMETER: 17" MAX TURNING LENGTH: 34" DISTANCE BETWEEN CENTERS: 39" AXES & TRAVEL X-AXIS TRAVEL: 11.3" Z-AXIS TRAVEL: 34" RAPID TRAVERSE: 710 IPM SPINDLE SPINDLE MOTOR: 30 HP MAX SPINDLE SPEED: 3,400 RPM MAX TORQUE: 300 FT-LB @ 700 RPM SPINDLE NOSE: A2-6 BAR CAPACITY: 2.5" TOOLING TURRET STATIONS: 12 CONTROL HAAS CNC CONTROL EQUIPPED WITH TAIL STOCK AUTO DOOR MACHINE DIMENSIONS & WEIGHT DIMENSIONS: 150" L 77" W 74" H WEIGHT: 14,000 LBS

SPIRAL PRESS & DEWATERING SYSTEM - MODEL-300 SPECIFICATION WEIGHT: 5000 LBS DIMENSION: 13.8 FT X 3 FT X 6.6 FT POWER: 18.5 KW VOLTAGE: 480V AMP: 30 FEED/HOUR: 3 TON OR 8 M3 MESH DENSITY: 0.75 MM MOTOR RPM: 1440 GRADE: STEEL WEIGHT (KG): 2300 WEIGHT (LBS): 5000 DIMENSION (MM): 4142 X 890 X 1946 DIMENSION (M): 4.2 X 0.9 X 2 DIMENSION (INCH): 165.35 X 35.43 X 78.74 DIMENSION (FEET): 13.78 X 2.95 X 6.56 INPUT/HOUR (CUBIC M): 5 INPUT/HOUR (GALLON): 1320 INPUT/HOUR (TON): 3 VOLTAGE: 480V POWER: 18.5KW RPM: 25 DEWATER RATE: 70% MESH DENSITY: 0.75MM MOTOR SPEED: 1440 AMP: 30 MOTOR: 2333 REDUCTION GEARS: 9485 MESH: 10000 SPRING:45 SCREW: 21000 CONE PLATE: 3000 THRUST BEARING: 286 POWER BOX: 780

1999 HAAS SL-20 CNC TURNING CENTER CAPACITY TURNING CAPACITY: 10" 20" MAX TURNING DIAMETER: 10.3" SWING OVER BED: 23" MACHINING LENGTH: 20" DISTANCE BETWEEN CENTERS: 24" SPINDLE SPINDLE MOTOR: 20 HP MAXIMUM RPM: 4,000 SPINDLE BORE: 3" SPINDLE NOSE: A2-6 AXES & TRAVEL X-AXIS TRAVEL: 8.45" Z-AXIS TRAVEL: 20" RAPID TRAVERSE RATE: 710 IPM TOOLING BAR CAPACITY: 2" CHUCK SIZE: 8" 10-POSITION TURRET CONTROL HAAS CNC CONTROL WITH QUICK CODE PROGRAMMING MACHINE DIMENSIONS & WEIGHT DIMENSIONS (L W H): 126.5" 78" 81" WEIGHT: 9,000 LBS

55-TON IRONWORKER - NEEDS REPAIR - 55-TON MACHINE - PUNCH STATION WORKS, BUT ISSUES IN OTHER PORTIONS OF MACHINE

2020 K-TIG 1000 HIGH-SPEED KEYHOLE TIG WELDING SYSTEM. PROCESS TYPE KEYHOLE TIG (K-TIG). MATERIAL COMPATIBILITY STAINLESS STEEL, DUPLEX, INCONEL, TITANIUM, HIGH-NICKEL ALLOYS. WALL THICKNESS RANGE 3MM TO 25MM (1/8 TO 1 INCH) IN A SINGLE PASS. POWER REQUIREMENT 415V, 3 PHASE (OR AS CONFIGURED). CURRENT RANGE UP TO 1,000 AMPS. TORCH COOLING WATER-COOLED TORCH. CONTROL SYSTEM K-TIG TOUCHSCREEN CONTROL INTERFACE. AUTOMATION COMPATIBILITY INTEGRATES WITH CNC SYSTEMS, ORBITAL AND COLUMN/BOOM WELDERS. SHIELDING GAS ARGON (TYPICAL). MAX WELDING SPEED UP TO 600 MM/MIN (23.6 IN/MIN) DEPENDING ON MATERIAL AND THICKNESS. DUTY CYCLE 100% @ 300 A, 60% @ 500 A (DEPENDS ON POWER SUPPLY).

GMC GMM-1054V KNEE MILL W/ DRO

BARREL / DRUM LIFT POWER CLAMP POWER MOVE 83" 510LBS 110 VOLT. BUILT BY ALUM-A-LIFT, PART STAINLESS STEEL, ALUMINUM AND CARBON STEEL FOR THE LEGS. LIFT CAPACITY IS 510LBS. LIFT HEIGHT MEASURED AT THE CENTER OF THE CLAMPING DEVICE IS 83" IN THE LOWERED POSITION. THE CENTER OF THE CLAMP IS 19.5" SO LIFT IS APPROX 63.5" WITH A TAPE MEASURE. HEIGHT OF THE MACHINE IS 77" AND WIDTH IS 32". TWO REMOTE HAND CONTROLS ON CORDS FOR LIFTING AND CLAMPING. TILLER HAS CONTROLS FOR MOVEMENT AND LIFT CONTROL. MACHINE RUNS ON 110 VOLT, NORMALLY THESE ARE RUN ON BATTERIES WITH A SMALL CHARGER BUILT IN. WORKS WITH 55 GALLON DRUMS.

2000 BRANDT KD-94 EDGE BANDER EDGE THICKNESS CAPACITY (STRIP): 0.4MM - 20MM EDGE THICKNESS CAPACITY (COIL): 0.4MM - 3MM PANEL THICKNESS: 3/8 - 2-3/8 MINIMUM PANEL LENGTH: 6-3/8 MINIMUM PANEL WIDTH: 2-1/2 PANEL HEIGHT: 10MM - 55MM EQUIPPED WITH: SWIVEL OPERATOR CONTROL PANEL

PRESS BRAKE DIES INCLUDES: YELLOW RACK FILLED WITH SHORT 3 AND SMALLER DIES A-FRAME DOUBLE SIDED RACK FILLED WITH DIES 6 AND SMALLER DIES PICTURED ON FLOOR ALL DIES IN THE HEAVY DUTY ONE SIDED GRAY BEAM RACK BUT THIS RACK NOT INCLUDED.

2000 AMADA HFA250W AUTOMATIC BANDSAW SERIAL 25060220

1981 MARVEL SERIES 81/9 VERTICAL BAND SAW ELECTRICAL: 460V, 3-PHASE

2 BBL JACKETED FERMENTER TANK. 2 BBL JACKETED FERMENTER WITH TOP MANWAY. SINGLE ZONE JACKETING IN CONE AND SIDE WALL. 84 GAL. CAPACITY. INCLUDES RACKING ARM, CIP ARM AND SPRAY BALL, SAMPLE VALVE, RACKING ARM, 2 BUTTERFLY VALVES, ADJUSTABLE FEET. RATED TO 2BAR (29 PSI). CONSTRUCTED OF 304 STAINLESS STEEL, TANK MATERIAL THICKNESS IS 3MM, JACKET AND OUTER SHELL THICKNESS IS 2MM. CONE HAS 60 DEGREE INTERIOR ANGLE. 31.5-IN. DIAMETER X 66.5-IN.H.

SUNNEN HONE MACHINE MODEL MBB-1660K SINGLE PHASE 110V FILTER#PF-150K S/N: 80562

2021 P/A INDUSTRIES SS89LASTL PALLET REEL STRAIGHTENER HEAVY-DUTY COIL HANDLING & PRESS FEED STRAIGHTENING SYSTEM PALLET-MOUNTED COIL (HORIZONTAL PAYOFF DESIGN) MAX COIL WIDTH APPROX. 1824 IN. MAX COIL OD APPROX. 48 IN. MAX COIL WEIGHT UP TO 3,000-4,000 LB TYPICAL STRAIGHTENING ROLLS 7-9 PRECISION ROLLS (TOP & BOTTOM) MANUAL OR MOTORIZED ROLL ADJUSTMENT POWERED DRIVE WITH VARIABLE SPEED CONTROL FEED DIRECTION LEFT-TO-RIGHT (CONFIGURABLE) ELECTRICAL 230/460V, 3-PHASE

PALLETS OF MISC MILLER WELDERS - ALL NEED WORK. PARTS MACHINES

ROTOBRUSH AIR DUCT CLEANER

2021 P/A INDUSTRIES SRFX-220M SERVO ROLL FEED - HIGH-PRECISION PRESS FEEDING SYSTEM FOR STAMPING LINES. FEED TYPE SERVO ROLL FEED. FEED WIDTH CAPACITY UP TO 220 MM (8.66 IN.). MATERIAL THICKNESS CAPACITY TYPICALLY UP TO 2.0 MM (0.08 IN.) DEPENDING ON MATERIAL. FEED LENGTH RANGE PROGRAMMABLE, VARIABLE PER STROKE. FEED ACCURACY 0.05 MM (TYPICAL, DEPENDING ON SETUP). DRIVE SYSTEM AC SERVO MOTOR WITH DIGITAL CONTROLLER. CONTROL PANEL TOUCHSCREEN HMI WITH MEMORY STORAGE. COMMUNICATION PRESS INTERFACE / AUTOMATION-READY I/O. ELECTRICAL REQUIREMENTS 230V / 3-PHASE (STANDARD). USED - EXCELLENT, FULLY OPERATIONAL.

5 TON HYDRAULIC SCISSOR LIFT 100 INCH HIGH 26 INCH X 67 INCH TOP HYDRAULIC POWER PACK AND CONTROLS. TOP 27 INCH X 67 INCH LOWERED POSITION IS AT 49.75 INCH RAISED AT 100.5 INCH HAS LIMIT SWITCHES TO SET MAX HEIGHT. RATED AT 5 TON. THE RAMS ON THE LIFT CYLINDERS ARE 4 INCH IN DIAMETER. CYLINDERS THEMSELVES ABOUT 8 INCH IN DIAMETER. RUNS ON 480 VOLT 3 PHASE. SAFETY BLUE ON THE BOTTOM AND THE BLACK ON THE TOP HAVE BEEN REPAINTED SHIPPING DIMENSIONS 37 INCH X 88 INCH X 56 INCH, 3800LBS

LINCOLN PRECISION TIG 275 S/N: U1040100998

2000 SCOTCHMAN AUTOMATIC COLD SAW MODEL CLM350SA WITH INFEED & OUTFEED TABLES S/N: B544340603

SHELDON EXL-56-B LATHE W/ ACCESSORIES

LORS SPOT WELDER 140AP-ADV S/N: 1094-5837

2008 CHICAGO PNEUMATIC QRS 5.0 HP AIR COMPRESSOR