FOOD PACKAGING AND MOLDED PULP FIBER MANUFACTURING EQUIPMENT

2021 DSC PAD-O-MATIC 360W MEAT PADDING & DENESTER S/N: 709. A HIGH SPEED, STRAIGHT LINE, AUTOMATIC SYSTEM TO GLUE ABSORBENT SOAKER PADS INTO STYRENE FOAM PACKAGING TRAYS. TRAY SIZE SPEED RANGE: NUMBER 2P 30 MIN TO 360 MAX TRAYS PER MINUTE NUMBER 3P 30 MIN TO 350 MAX TRAYS PER MINUTE NUMBER 4P 30 MIN TO 320 MAX TRAYS PER MINUTE NUMBER 6P 30 MIN TO 280 MAX TRAYS PER MINUTE NUMBER 8P 30 MIN TO 250 MAX TRAYS PER MINUTE NUMBER 9P 30 MIN TO 250 MAX TRAYS PER MINUTE NUMBER 10P 30 MIN TO 250 MAX TRAYS PER MINUTE NUMBER 14P 30 MIN TO 250 MAX TRAYS PER MINUTE NUMBER 15P 30 MIN TO 250 MAX TRAYS PER MINUTE NUMBER 16P 30 MIN TO 250 MAX TRAYS PER MINUTE TRAY SIZE: 8 1/2 MINIMUM, 15.75 MAXIMUM IN THE CROSS MACHINE DIRECTION, 5.75 MINIMUM, 10 MAXIMUM IN THE MACHINE DIRECTION. MAXIMUM TRAY DEPTH IS 2.375. PADDING MATERIAL: 6" WIDE MINIMUM, 14" WIDE MAXIMUM, 8 TO 22 PLYS OF ABSORBENT CREPE MATERIAL WITH ONE PLY OF POLYETHYLENE WOUND TO THE OUTSIDE OF THE ROLL. POUCH TYPE PADDING MATERIAL MAY BE USED WITH THE REGISTERED CUT OPTION. PADDING MATERIAL MUST BE WOUND ON A 3" I.D. FIBER CORE TO A MAXIMUM ROLL DIAMETER OF 38" OR MAY BE PULLED FROM A GAYLORD. PAD CUT SIZE: 3" LONG X 6" WIDE MINIMUM; 8" LONG X 14" WIDE MAXIMUM. PAD LENGTH IS KEYPAD SELECTABLE FROM 3" MINIMUM TO 8" MAXIMUM IN .01" INCREMENTS. PAD PLACEMENT IN TRAY + OR - 1/4" FROM TARGETED POSITION. ADHESIVE: NATIONAL ADHESIVE 34-2950, 34-2931, HENKEL TS-100, FULLER PHC7264, OR EQUIVALENT. ADHESIVE MUST BE FDA APPROVED FOR INCIDENTAL FOOD CONTACT. UTILITY REQUIREMENTS: POWER: 220, 380, 416, OR 480 VAC, 3 PHASE, 50 AMP, 50 OR 60 HZ AIR: 20 CFM, 80-PSI MINIMUM PRESSURE CLEAN DRY AIR.

AEROSPEC A68235 LASER CUTTING AND PRODUCTION SYSTEM, 2KWS OF LASER POWER, DUAL 3D HIGH SPEED BEAM DELIVERY SYSTEMS, HIGH SPEED MAGNETIC CONVEYORS, HIGH SPEED DESTACK/RESTACK SYSTEM WITH KEYENCE IV2 VISION SENSORS, FANUC ROBOTS, COHERENT J-1000 LASERS, SCANLAB POWERSCAN II 50I SCAN HEADS

DONALDSON TORIT DFLS4 DUST COLLECTOR, EQUIPPED WITH DELTA P PLUS CONTROL, TORI SELAED DRUM KIT, FLAMQUENCH II SQ FIKE RECTANGULAR FLAMELESS VENT

AEROSPEC A68235 LASER CUTTING AND PRODUCTION SYSTEM S/N: A68235-1-1. POWER: 480VAC, 3-PH/60HZ. EQUIPPED WITH (2) FANUC SR-6IA ROBOTS - 2KWS OF LASER POWER, DUAL 3D HIGH SPEED BEAM DELIVERY SYSTEMS, HIGH SPEED MAGNETIC CONVEYORS, HIGH SPEED DESTACK/RESTACK SYSTEM WITH KEYENCE IV2 VISION SENSORS, FANUC ROBOTS, COHERENT J-1000 LASERS, SCANLAB POWERSCAN II 50I SCAN HEADS.

2021 AMHERST STAINLESS STEEL AGITATION PRESSURE POT ON CASTERS S/N: 1748. 130 PSI AT 150 DEGREE FAHRENHEIT. EQUIPPED WITH 0.5 HP MOTOR AND (1) 500 PSI BASKET STRAINER AND BAG FILTER. PREVIOUSLY USED FOR RAW MATERIALS USED IN THE PRODUCTION OF MOLDED FIBER PRODUCTS.

2021 AMHERST STAINLESS STEEL AGITATION PRESSURE POT ON CASTERS, S/N: 1707. 130 PSI AT 150 DEGREE FAHRENHEIT. EQUIPPED WITH 0.5 HP MOTOR AND (1) 500 PSI BASKET STRAINER AND BAG FILTER. PREVIOUSLY USED FOR RAW MATERIALS USED IN THE PRODUCTION OF MOLDED FIBER PRODUCTS.

HEAT TECHNOLOGY INC SPECTRA HTI OVEN WITH CONVEYORS AND CONTROL PANEL

2020 AMHERST STAINLESS STEEL AGITATION PRESSURE POT ON CASTERS S/N: 1598. 130 PSI AT 150 DEGREE FAHRENHEIT. EQUIPPED WITH 0.5 HP MOTOR. PREVIOUSLY USED FOR RAW MATERIALS USED IN THE PRODUCTION OF MOLDED FIBER PRODUCTS.

2019 AMHERST STAINLESS STEEL AGITATION PRESSURE POT ON CASTERS S/N: 1512. 130 PSI AT 150 DEGREE FAHRENHEIT. EQUIPPED WITH 0.5 HP MOTOR AND (1) 500 PSI BASKET STRAINER AND BAG FILTER. PREVIOUSLY USED FOR RAW MATERIALS USED IN THE PRODUCTION OF MOLDED FIBER PRODUCTS.

2020 AMHERST STAINLESS STEEL AGITATION PRESSURE POT ON CASTERS S/N: 1599. 130 PSI AT 150 DEGREE FAHRENHEIT. EQUIPPED WITH 0.5 HP MOTOR AND (1) 500 PSI BASKET STRAINER AND BAG FILTER. PREVIOUSLY USED FOR RAW MATERIALS USED IN THE PRODUCTION OF MOLDED FIBER PRODUCTS.

2021 AMHERST STAINLESS STEEL AGITATION PRESSURE POT ON CASTERS S/N: 1652. 130 PSI AT 150 DEGREE FAHRENHEIT. EQUIPPED WITH 0.5 HP MOTOR AND (1) 500 PSI BASKET STRAINER AND BAG FILTER. PREVIOUSLY USED FOR RAW MATERIALS USED IN THE PRODUCTION OF MOLDED FIBER PRODUCTS.

2019 AMHERST STAINLESS STEEL AGITATION PRESSURE POT ON CASTERS, S/N: 1511. 130 PSI AT 150 DEGREE FAHRENHEIT. EQUIPPED WITH 0.5 HP MOTOR AND (1) 500 PSI BASKET STRAINER AND BAG FILTER. PREVIOUSLY USED FOR RAW MATERIALS USED IN THE PRODUCTION OF MOLDED FIBER PRODUCTS.

STAINLESS STEEL S-1 ARC FILTER SCREEN FOR WET END EQUIPMENT, 304 SS PULP FEED INLET HEAD, 316L SS SCREEN PLATE, 304 SS SHELL AND WASHING DEVICE, SEAM WIDTH 50UM.

2020 AMHERST STAINLESS STEEL AGITATION PRESSURE POT ON CASTERS S/N: 1600. 130 PSI AT 150 DEGREE FAHRENHEIT. EQUIPPED WITH .5 HP MOTOR AND BASKET STRAINER AND BAG FILTER. PREVIOUSLY USED FOR RAW MATERIALS USED IN THE PRODUCTION OF MOLDED FIBER PRODUCTS.

TPM-1500 3-STAGE PULP THERMOFORMING MACHINE EQUIPPED WITH (1) 2018 TPM-AS-1500 2-STAGE AUTO STACKER - TPM-1500 3-STAGE PULP THERMOFORMING MACHINE, S/N: NA. EFFECTIVE MOLDING AREA: 1500MM L X 900MM W X 120MM H. POWER: 3-PH, 480V/60HZ. EQUIPPED WITH (1) 2018 TPM-AS-1500 2-STAGE AUTO STACKER, S/N: FP18310AS01. POWER: 480V/60HZ

AEROSPEC A68235 LASER CUTTING AND PRODUCTION SYSTEM, 2KWS OF LASER POWER, DUAL 3D HIGH SPEED BEAM DELIVERY SYSTEMS, HIGH SPEED MAGNETIC CONVEYORS, HIGH SPEED DESTACK/RESTACK SYSTEM WITH KEYENCE IV2 VISION SENSORS, FANUC ROBOTS, COHERENT J-1000 LASERS, SCANLAB POWERSCAN II 50I SCAN HEADS.

2021 AEROSPEC GLP 1KW J1000 COHERENT C02 PRODUCTION TRIM LASER S/N: A69010-00-001, WITH UL508A CONTROLS SYSTEM. LASER SYSTEM INCLUDES 1KW J1000 COHERENT C02 LASER, SCANLABS HURRYSCAN 30 WITH VARIOSCAN40 FLEX, LASERDESK SOFTWARE. THE LASER CONFIGURATION IS CAPABLE OF PERIMETER CUTTING IN A MAXIMUM RANGE OF 390MM X 540MM. THE TOOL IS MANUALLY LOADED AND UNLOADED BY A SINGLE OPERATOR. POWER: 480 VAC, 3-PH/60HZ INV.

2018 TPM TPM-1500 3-STAGE PULP THERMOFORMING MACHINE EQUIPPED WITH (1) 2018 TPM-AS-1500 2-STAGE AUTO STACKER - TPM-1500 3-STAGE PULP THERMOFORMING MACHINE, S/N: NA. EFFECTIVE MOLDING AREA: 1500MM L X 900MM W X 120MM H. POWER: 3-PH, 480V/60HZ, EQUIPPED WITH (1) 2018 TPM-AS-1500 2-STAGE AUTO STACKER, S/N: FP18311AS01, POWER: 480V/60HZ

AEROSPEC A68235 LASER CUTTING AND PRODUCTION SYSTEM, 2KWS OF LASER POWER, DUAL 3D HIGH SPEED BEAM DELIVERY SYSTEMS, HIGH SPEED MAGNETIC CONVEYORS, HIGH SPEED DESTACK/RESTACK SYSTEM WITH KEYENCE IV2 VISION SENSORS, FANUC ROBOTS, COHERENT J-1000 LASERS, SCANLAB POWERSCAN II 50I SCAN HEADS.