Gull Wing Industries Inc Industrial Sheet Metal Fabrication

Equipment Marketers and Appraisers

Category: PRESSES & FORMING

Total Lots: 554

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 554 lots

Year	Make	Model	Lot Description	Hammer Price
2004	PIRANHA	17512	2004 PIRANHA 17512 PRESS BRAKE 175 TON CAPACITY, 12 OVERALL, 10' 6 BETWEEN THE HOUSINGS, 6 RISER BLOCK, 175 TON CAPACITY, EQUIPPED WITH AUTOMEC CNC 300 AUTO GAUGE BACK GAUGE, SPEED CONTROL, TONNAGE CONTROL S/N: 17512-1036 2004 · PIRANHA · 17512	🔒 Subscribe
	TIMESAVERS	2211-23-0	TIMESAVERS 2211-23-0 BELT SANDER, 20/10 HP 460 V THREE PHASE, 36 INCH BELT, DRY TYPE, SINGLE BELT, PNEUMATIC TENSIONING, PUSHBUTTON CONTROL, FEED SPEED CONTROL, PROGRAMMABLE HEIGHT CONTROL, USED FOR METAL, S/N: 28882. INCLUDES TORIT DUST COLLECTOR MODEL 80 CAB, SN1. TIMESAVERS · 2211-23-0	🔒 Subscribe
	PIRANHA	M1/4-10	PIRANHA M1/4-10 HYDRAULIC SHEAR, 10 X 1/4" CAPACITY, PROGRAMMABLE FRONT OPERATED POWER BACK GAUGE, 39 INCHES OF TRAVEL, SINGLE, JOG, CONTINUOUS MODE, PROGRAMMABLE CUT LENGTH, HYDRAULIC HOLD DOWNS, VERY GOOD APPEARANCE. S/N: 1086 PIRANHA · M1/4-10	🔒 Subscribe
2000	INTERNATIONAL	9100 I 6X4	2000 INTERNATIONAL 9100 I 6X4 TRUCK TRACTOR DAY CAB, 52,000 POUND GVWR, 12,000 POUND FRONT AXLE, 40,000 POUND REAR AXLE CAPACITY, EATON FULLER 10 SPEED TRANSMISSION, SLIDING FIFTH WHEEL, POWER DIVIDER LOCKOUT, FOUR BAG AIR RIDE SUSPENSION WITH DUMP VALVE, AIR BRAKES, AIR CONDITIONING AND HEAT, POWER MIRRORS, SPEED CONTROL, THROTTLE CONTROL, AM/FM WEATHER RADIO, 686,098 MILES ON THE ODOMETER, MANUAL WINDOWS, MANUAL LOCKS, TWO SEATS, CUMMINS ISM 11 355/375 HP, FRONT TIRE SIZE 11R22.5 ON STEEL RIMS WAS APPROXIMATELY 65 TO 75% TREAD REMAINING, (2) 75 GALLON ALUMINUM FUEL TANK, REAR TIRES ARE 11R22.5 ON STEEL RIMS WITH 70 TO 85% TREAD REMAINING, SINGLE STACK, 161 INCH WHEELBASE, 69 INCHES FROM FRONT AXLE SPINDLE TO BACK OF CAB, BACK OF CAB TO REAR AXLE 122 INCHES, FRONT BUMPER TO REAR FRAME 262 INCHES, S/N: 2HSCBAHR8YC072866 2000 · INTERNATIONAL · 9100 I 6X4	🔒 Subscribe
	TOYOTA	7FGU 25	TOYOTA 7FGU 25 FORKLIFT, RATED AT 3750 POUND CAPACITY, TRIPLE STAGE FREE LIFT MAST, 189 INCH MAST HEIGHTS, 48 INCH FORKS, SIDE SHIFT, PNEUMATIC TIRES, FRONT TIRE SIZE 7.00 -12 NHS, REAR TIRE SIZE 6.00 -9.00, LP FUEL, AUTOMATIC TRANSMISSION, FALL ON PROOF SUSPENSION, 9078 HOURS ON THE METER, ORIGINAL PAINT DECAL, USED ON A ROUTINE BASIS. S/N: 60478 TOYOTA · 7FGU 25	🔒 Subscribe
			STEEL STOCK, ASSORTED STRUCTURAL STEEL, INCLUDES TUBE STEEL, RECTANGLES, CHANNELS, SQUARES, FLATS, ALSO INCLUDES VARIOUS ALUMINUM PIECES, LENGTH VARY FROM 2 FOOT UP TO 20 FOOT INCLUDES THE RACK.	🔒 Subscribe
	EDWARDS	JAWS IV25	EDWARDS JAWS IV25 IRON WORKER - NOTCHING 5/16 X 2 X 3, PUNCHES 1 INCH DIAMETER HOLE IN 5/8 PLATE, MAXIMUM ANGLE CAPACITY 3 X 3 X 3/8, 8 FLAT SHEAR, INCLUDES A SET OF PUNCHES. EDWARDS · JAWS IV25	🔒 Subscribe
	CLAUSING COLCHESTER	17 INCH	CLAUSING COLCHESTER 17 INCH ENGINE LATHE S/N: 7/0219/11911, 12 INCH 3 JAW CHUCK, 14" COMBINATION 4 JAW CHUCK 17" FACEPLATE, POWER LONGITUDINAL FEED, POWER CROSS FEED, TAPER ATTACHMENT, ENGLISH AND METRIC THREAD, 2 11/16 SPINDLE BORE, 17" SWING, 64" CENTER TO CENTER, INCLUDES DTM QUICK CHANGE TOOL HOLDER, OPERATES ON AN AS NEEDED BASIS. CLAUSING COLCHESTER · 17 INCH	🔒 Subscribe
			1381 LBS. COPPER BARS, (10 ) 1/4 BY 5 WIDTH BY 12, 1/4 BY 2 WIDTH 12, 1/4 X 1 12, 4 INCH 4 X 1/4 X 12.	🔒 Subscribe
	BLU-SURF		BLU-SURF BURN OFF OVEN, VOLTAGE 120 V, SINGLE PHASE, NATURAL GAS FUEL, 15 A, NATURAL GAS PRESSURE TWO PSI, 780,000 MAXIMUM BTU PER HOUR, MAXIMUM TEMPERATURE IS 800F, MINIMUM TEMPERATURE 300, 72" WIDTH, 69" DEPTH, 135" HEIGHT, INSIDE DIMENSIONS ARE 56" LEFT TO RIGHT 60" FRONT TO BACK BY 60" HEIGHT, SWINGING DOOR, HAS SINGLE TRANSPORTATION CART, TOP MOUNTED AFTERBURNER, DESIGN FOR THE EXHAUST VENT TO GO THROUGH A ROOF, USING A FIRE RESISTANT MAT, THE REFRACTORY ON THE BOTTOM IS DAMAGED. S/N: 2447-V-4404 BLU-SURF	🔒 Subscribe
	CHICAGO DRIES KRUMP	BP0-812-6	CHICAGO DRIES KRUMP BP0-812-6 APRON BRAKE, 8 FOOT WITH 12 GAUGE CAPACITY, WITH A FULL SET OF FINGERS, ORIGINAL PAINT AND DECAL, ORIGINAL CONDITION, VERY GOOD APPEARANCE. S/N: 323591-M CHICAGO DRIES KRUMP · BP0-812-6	🔒 Subscribe
	HYSTER	H 200ES	HYSTER H 200ES FORKLIFT INTEGRAL SIDE SHIFTER, WEIGHT OF FORKLIFT 26,800 POUNDS, 182 MAST HEIGHTS, RATED AT 18,000 POUND CAPACITY, OUTDOOR TYPE, TIRES FRONT DUAL TIRES SOLID RUBBER, WHEEL APPEARANCE, VERY GOOD CONDITION. SIZE 9.0020, LIMITED TREAD, 60 INCH FORK LENGTH, DOUBLE STAGE, NON-FREE LIFT, GMC V6 GAS POWER ENGINE, FALL ON PROOF SUSPENSION, FUNCTIONS ON AN AS NEEDED BASIS, HAS OIL LEAKS, HAS ADDED A MASTER SHUT OFF SWITCH. S/N: V7D 4780N HYSTER · H 200ES	🔒 Subscribe
			ELECTRIC COPPER CABLE.	🔒 Subscribe
	GULL WING	GW2801MLJ	GULL WING GW2801MLJ POWER DISTRIBUTION CENTER, 120/240 V SINGLE PHASE 4 WIRE, 225 AMP, TYPE THREE R, SQUARE D BREAKERS, 60 AMP, 50 AMP, 30 AMP, 20 AMP, RECEPTACLES. S/N: I9911-363 GULL WING · GW2801MLJ	🔒 Subscribe
	MILLER	MILLERMATIC 350P	MILLER MILLERMATIC 350P WIRE WELDER 200/230/460 V, SINGLE OR THREE PHASE, 350 AMP, HAS VOLTAGE AND WIRE SPEED CONTROL, SELF-CONTAINED WIRE FEEDER, MIG GUN, INCLUDES ARGON 75% CARBON DIOXIDE 25% GAS BOTTLE. S/N: LG180349B MILLER · MILLERMATIC 350P	🔒 Subscribe
			PRESS BRAKE DIES, A QUANTITY A SHORT DIES, VARIOUS SIZES AND TYPES, BOTTOM AND TOP DIES, V DIES AND GOOSENECK DIES, STANDARD TANG.	🔒 Subscribe
	BOBCAT	1812X	BOBCAT 1812X SNOWBLOWER 64 SNOWBLOWER, 711900421 (S/N: 711900421), 67 INCH WIDTH, UNIVERSAL SKID LOADER COUPLER, HYDRAULIC SWIVEL OF SHOOT, USE A STANDARD FLOW HYDRAULIC SYSTEM, PURCHASE NEW, LIMITED USAGE, VERY GOOD BOBCAT · 1812X	🔒 Subscribe
	GEMA	CG01	GEMA CG01 POWER UNIT (S/N: 13101-00655), (2) GEMA ELECTROSTATIC PAINT GUNS AND POWDER DISPENSER, EASY SELECT GUNS, SERIAL NUMBER 1330125220, MOUNTED ON A GEMA CART. GEMA · CG01	🔒 Subscribe
			PRESS BRAKE DIES, ASSORTED SIZES AND TYPES, THE LENGTHS VARY, GOOSENECK, V DIE, STANDARD TANG.	🔒 Subscribe
			ELECTRIC COPPER CABLE	🔒 Subscribe
	DIACRO	16-72	DIACRO 16-72 PRESS BRAKE HYDRO MECHANICAL, 35 TON, 6 FOOT OVERALL 62 INCHES BETWEEN THE UPRIGHTS, FRONT OPERATED MECHANICAL BACK GAUGE, MANUAL RAM ADJUSTMENT, BANNER LIGHT CURTAINS, OPERATIONAL. S/N: JE1019 DIACRO · 16-72	🔒 Subscribe
1996	E.G.HELLER	2000 E Z3023	1996 E.G.HELLER 2000 E Z3023 ANGLE ROLL S/N: 96G-0006, 220 V THREE PHASE., SHAFTS DIAMETER 1.18 INCHES, SHAFT LENGTH 2.9 INCHES, ROLLS DIAMETER 5 INCHES, MAXIMUM OPENING BETWEEN ROLLED 3.8 INCHES, WORKING HEIGHT 34 INCHES, MACHINE WEIGHS APPROXIMATELY 364 POUNDS. 1996 · E.G.HELLER · 2000 E Z3023	🔒 Subscribe
	SQUARE D		SQUARE D I LINE BREAKERS, 30 UP TO 225 AMP. SQUARE D	🔒 Subscribe
	FMB	TRITON	FMB TRITON HORIZONTAL BAND SAW, 220 V THREE PHASE, MITERING BASE, WET TYPE, 10 X 14, MANUAL VISE. S/N: 81048 FMB · TRITON	🔒 Subscribe
	MARATHON		MARATHON GENERATORS 175KW MISSING SOME SHEET METAL PARTS BRAND NEW. MARATHON	🔒 Subscribe
			PRESS BRAKE DIES, ASSORTED SIZES ASSORTED LENGTHS, INCLUDING FLATTENING DIES, V DIES, ACUTE ANGLE, STANDARD TANGS.	🔒 Subscribe
	SQUARE D		ASSORTED SQUARE D BREAKERS, 200 UP TO 2000 AMP, CUTLER HAMMER 1600 AMP POWER BREAKER STORED ENERGY, VARIOUS CONDITIONS, ALL ARE USED. SQUARE D	🔒 Subscribe
			COPPER CABLE, MIXED LOT VARIOUS SIZES AND TYPES.	🔒 Subscribe
			ELECTRIC COPPER CABLE	🔒 Subscribe
			PRESS BRAKE DIES, 12 FOOT LENGTH, 2 INCH OPENING, TOP AND BOTTOM, V DIES, STANDARD TANG.	🔒 Subscribe
	WEATHERHEAD	COLL-O-CRIMP	WEATHERHEAD COLL-O-CRIMP HOSE CRIMPER, SELF-CONTAINED HYDRAULICS, DIES UP TO 1 INCH, INCLUDES CUSTOMIZED WORKBENCH, MILWAUKEE ABRASIVE CHOP SAW. WEATHERHEAD · COLL-O-CRIMP	🔒 Subscribe
			WIRE - ELECTRIC COPPER CABLE.	🔒 Subscribe
	MILLER	XMT 304	MILLER XMT 304 DC INVERTER ARC WELDER, 230/460 V SINGLE OR THREE PHASE, 300 AMP, 60% DC, VOLTAGE AND AMPERAGE ADJUSTMENT, S/N: KJ143439 INCLUDES THE MILLER SUPER S32P VOLTAGE SENSING WIRE FEEDER, WITH TWECO MIG GUN, AND ALSO INCLUDES MILLER SPOOLMATIC 30 AA ALUMINUM SPOOL GUN, ENTIRE SYSTEM IS MOUNTED ON A 4 CASTER CART. MILLER · XMT 304	🔒 Subscribe
			SHOP BUILT STEEL STORAGE RACKS, 113 INCHES LEFT RIGHT 80 INCHES FRONT TO BACK, (8) ROLLOUT SHELVES, DESIGNED TO HANDLE 4 X 8 SHEETS, BOLTED TO THE FLOOR	🔒 Subscribe
			PRESS BRAKE DIES, 8 FOOT LENGTH, 2 INCH OPENING, TOP AND BOTTOM, V DIES.	🔒 Subscribe
	SQUARE D	QO AND QOU	SQUARE D QO AND QOU BREAKERS, 1-, 2- AND 3-POLE, 15 UP TO 100 A, APPROXIMATELY (100) PIECES. SQUARE D · QO AND QOU	🔒 Subscribe
	GULL WING	GW501MLI-23100	PORTABLE DISTRIBUTION STATION - GULL WING POWER DISTRIBUTION PORTABLE STATION, MODEL GW501MLI-23100, 120/240 V, SINGLE PHASE 4 WIRE, 50 AMP, TYPE 3R, SQUARE D BREAKERS, RECEPTACLES FOR 50 AMP, 30 AMP, 20 AMP, INCLUDES POWER CORDS. S/N: H9 911225 GULL WING · GW501MLI-23100	🔒 Subscribe
	EAGLE	1962	(2) EAGLE MODEL 1962, 60 GALLON FLAMMABLE STORAGE CABINETS EAGLE · 1962	🔒 Subscribe
	MILLER	MILLERMATIC 300	MILLER MILLERMATIC 300 MIG WELDER, 200/230/460 V, THREE PHASE, FOUR ROLL INTERNAL FEEDER, LED READOUT FOR WIRE SPEED AND VOLTAGE, INCLUDES MIG GUN. INCLUDES GAS BOTTLE 75% ARGON 25% CARBON DIOXIDE. S/N: LC556114 MILLER · MILLERMATIC 300	🔒 Subscribe
	SQUARE D	ATV 31HU40M3X5	(4) ATV 31HU40M3X5 HP SQUARE D VFD, (2) USED, ASSORTED REACTORS 18 AMP SQUARE D · ATV 31HU40M3X5	🔒 Subscribe
	SQUARE D		(2) SQUARE D BREAKERS, 800 AMP 3-POLE, USED. SQUARE D	🔒 Subscribe
			CUSTOM BUILT SAND DISPENSER, MOUNTED ON FOUR LEGS, 118 INCHES LEFT TO RIGHT, 46 INCHES FRONT TO BACK, STEEL HOPPER, BOTTOM DISCHARGE, MANUAL GATE, USED IN CONJUNCTION WITH THE SAND BLAST POT.	🔒 Subscribe
			ELECTRICAL WIRE, ASSORTED TYPES AND SIZES, ALL COPPER.	🔒 Subscribe
	SQUARE D		GULL WING POWER DISTRIBUTION CENTER, SQUARE D BREAKERS, 50 AMP, 30 AMP, 20 AMP RECEPTACLES, INCLUDES POWER CABLE. SQUARE D	🔒 Subscribe
	MARATHON	500 KW	MARATHON 500 KW GENERATOR, HAS NOT FUNCTION FOR SEVERAL YEARS, UNIT 5544 HOURS ON UNIT, WAS FUNCTIONING PROPERLY WHEN TAKEN OUT OF SERVICE DUE TO ENGINE PROBLEM. MARATHON · 500 KW	🔒 Subscribe
			PRESS BRAKE DIES, TOP GOOSENECK, 10 FOOT LENGTH, 3/4 WIDTH.	🔒 Subscribe
			STEEL STORAGE RACK, 22 LEFT TO RIGHT, FRONT TO BACK 80, CUSTOM BUILT FOR 5 X 10 SHEETS, THIS IS BOLTED TO THE FLOOR, AND WILL HAVE TO BE CUT APART FOR REMOVAL.	🔒 Subscribe
			SHOP BUILT FLUID TANKS, (3), 70 GALLON MOLDED PLASTIC TANKS, WITH (2) ALEMITE PNEUMATIC PUMPS, (1) FLOWJET PUMP, (1) FLOWJET AIR PUMP HAS A METER NOZZLE, THIS IS TRANSPORTABLE WITH A FORKLIFT.	🔒 Subscribe
			ALUMINUM ASSORTED SIZES OF ALUMINUM SHEETS MOST ARE DROPS, VARIOUS SIZES AND THICKNESS. APPROXIMATELY 1680 POUNDS.	🔒 Subscribe
			(3) NEW ELECTRICAL WIRE, ASSORTED, 500 FOOT ROLLS.	🔒 Subscribe

Year	Make	Model	Description	Price
2004	PIRANHA	17512	2004 PIRANHA 17512 PRESS BRAKE 175 TON CAPACITY, 12 OVERALL, 10' 6 BETWEEN THE HOUSINGS, 6 RISER BLOCK, 175 TON CAPACITY, EQUIPPED WITH AUTOMEC CNC 300 AUTO GAUGE BACK GAUGE, SPEED CONTROL, TONNAGE CONTROL S/N: 17512-1036	🔒 Subscribe
	TIMESAVERS	2211-23-0	TIMESAVERS 2211-23-0 BELT SANDER, 20/10 HP 460 V THREE PHASE, 36 INCH BELT, DRY TYPE, SINGLE BELT, PNEUMATIC TENSIONING, PUSHBUTTON CONTROL, FEED SPEED CONTROL, PROGRAMMABLE HEIGHT CONTROL, USED FOR METAL, S/N: 28882. INCLUDES TORIT DUST COLLECTOR MODEL 80 CAB, SN1.	🔒 Subscribe
	PIRANHA	M1/4-10	PIRANHA M1/4-10 HYDRAULIC SHEAR, 10 X 1/4" CAPACITY, PROGRAMMABLE FRONT OPERATED POWER BACK GAUGE, 39 INCHES OF TRAVEL, SINGLE, JOG, CONTINUOUS MODE, PROGRAMMABLE CUT LENGTH, HYDRAULIC HOLD DOWNS, VERY GOOD APPEARANCE. S/N: 1086	🔒 Subscribe
2000	INTERNATIONAL	9100 I 6X4	2000 INTERNATIONAL 9100 I 6X4 TRUCK TRACTOR DAY CAB, 52,000 POUND GVWR, 12,000 POUND FRONT AXLE, 40,000 POUND REAR AXLE CAPACITY, EATON FULLER 10 SPEED TRANSMISSION, SLIDING FIFTH WHEEL, POWER DIVIDER LOCKOUT, FOUR BAG AIR RIDE SUSPENSION WITH DUMP VALVE, AIR BRAKES, AIR CONDITIONING AND HEAT, POWER MIRRORS, SPEED CONTROL, THROTTLE CONTROL, AM/FM WEATHER RADIO, 686,098 MILES ON THE ODOMETER, MANUAL WINDOWS, MANUAL LOCKS, TWO SEATS, CUMMINS ISM 11 355/375 HP, FRONT TIRE SIZE 11R22.5 ON STEEL RIMS WAS APPROXIMATELY 65 TO 75% TREAD REMAINING, (2) 75 GALLON ALUMINUM FUEL TANK, REAR TIRES ARE 11R22.5 ON STEEL RIMS WITH 70 TO 85% TREAD REMAINING, SINGLE STACK, 161 INCH WHEELBASE, 69 INCHES FROM FRONT AXLE SPINDLE TO BACK OF CAB, BACK OF CAB TO REAR AXLE 122 INCHES, FRONT BUMPER TO REAR FRAME 262 INCHES, S/N: 2HSCBAHR8YC072866	🔒 Subscribe
	TOYOTA	7FGU 25	TOYOTA 7FGU 25 FORKLIFT, RATED AT 3750 POUND CAPACITY, TRIPLE STAGE FREE LIFT MAST, 189 INCH MAST HEIGHTS, 48 INCH FORKS, SIDE SHIFT, PNEUMATIC TIRES, FRONT TIRE SIZE 7.00 -12 NHS, REAR TIRE SIZE 6.00 -9.00, LP FUEL, AUTOMATIC TRANSMISSION, FALL ON PROOF SUSPENSION, 9078 HOURS ON THE METER, ORIGINAL PAINT DECAL, USED ON A ROUTINE BASIS. S/N: 60478	🔒 Subscribe
			STEEL STOCK, ASSORTED STRUCTURAL STEEL, INCLUDES TUBE STEEL, RECTANGLES, CHANNELS, SQUARES, FLATS, ALSO INCLUDES VARIOUS ALUMINUM PIECES, LENGTH VARY FROM 2 FOOT UP TO 20 FOOT INCLUDES THE RACK.	🔒 Subscribe
	EDWARDS	JAWS IV25	EDWARDS JAWS IV25 IRON WORKER - NOTCHING 5/16 X 2 X 3, PUNCHES 1 INCH DIAMETER HOLE IN 5/8 PLATE, MAXIMUM ANGLE CAPACITY 3 X 3 X 3/8, 8 FLAT SHEAR, INCLUDES A SET OF PUNCHES.	🔒 Subscribe
	CLAUSING COLCHESTER	17 INCH	CLAUSING COLCHESTER 17 INCH ENGINE LATHE S/N: 7/0219/11911, 12 INCH 3 JAW CHUCK, 14" COMBINATION 4 JAW CHUCK 17" FACEPLATE, POWER LONGITUDINAL FEED, POWER CROSS FEED, TAPER ATTACHMENT, ENGLISH AND METRIC THREAD, 2 11/16 SPINDLE BORE, 17" SWING, 64" CENTER TO CENTER, INCLUDES DTM QUICK CHANGE TOOL HOLDER, OPERATES ON AN AS NEEDED BASIS.	🔒 Subscribe
			1381 LBS. COPPER BARS, (10 ) 1/4 BY 5 WIDTH BY 12, 1/4 BY 2 WIDTH 12, 1/4 X 1 12, 4 INCH 4 X 1/4 X 12.	🔒 Subscribe
	BLU-SURF		BLU-SURF BURN OFF OVEN, VOLTAGE 120 V, SINGLE PHASE, NATURAL GAS FUEL, 15 A, NATURAL GAS PRESSURE TWO PSI, 780,000 MAXIMUM BTU PER HOUR, MAXIMUM TEMPERATURE IS 800F, MINIMUM TEMPERATURE 300, 72" WIDTH, 69" DEPTH, 135" HEIGHT, INSIDE DIMENSIONS ARE 56" LEFT TO RIGHT 60" FRONT TO BACK BY 60" HEIGHT, SWINGING DOOR, HAS SINGLE TRANSPORTATION CART, TOP MOUNTED AFTERBURNER, DESIGN FOR THE EXHAUST VENT TO GO THROUGH A ROOF, USING A FIRE RESISTANT MAT, THE REFRACTORY ON THE BOTTOM IS DAMAGED. S/N: 2447-V-4404	🔒 Subscribe
	CHICAGO DRIES KRUMP	BP0-812-6	CHICAGO DRIES KRUMP BP0-812-6 APRON BRAKE, 8 FOOT WITH 12 GAUGE CAPACITY, WITH A FULL SET OF FINGERS, ORIGINAL PAINT AND DECAL, ORIGINAL CONDITION, VERY GOOD APPEARANCE. S/N: 323591-M	🔒 Subscribe
	HYSTER	H 200ES	HYSTER H 200ES FORKLIFT INTEGRAL SIDE SHIFTER, WEIGHT OF FORKLIFT 26,800 POUNDS, 182 MAST HEIGHTS, RATED AT 18,000 POUND CAPACITY, OUTDOOR TYPE, TIRES FRONT DUAL TIRES SOLID RUBBER, WHEEL APPEARANCE, VERY GOOD CONDITION. SIZE 9.0020, LIMITED TREAD, 60 INCH FORK LENGTH, DOUBLE STAGE, NON-FREE LIFT, GMC V6 GAS POWER ENGINE, FALL ON PROOF SUSPENSION, FUNCTIONS ON AN AS NEEDED BASIS, HAS OIL LEAKS, HAS ADDED A MASTER SHUT OFF SWITCH. S/N: V7D 4780N	🔒 Subscribe
			ELECTRIC COPPER CABLE.	🔒 Subscribe
	GULL WING	GW2801MLJ	GULL WING GW2801MLJ POWER DISTRIBUTION CENTER, 120/240 V SINGLE PHASE 4 WIRE, 225 AMP, TYPE THREE R, SQUARE D BREAKERS, 60 AMP, 50 AMP, 30 AMP, 20 AMP, RECEPTACLES. S/N: I9911-363	🔒 Subscribe
	MILLER	MILLERMATIC 350P	MILLER MILLERMATIC 350P WIRE WELDER 200/230/460 V, SINGLE OR THREE PHASE, 350 AMP, HAS VOLTAGE AND WIRE SPEED CONTROL, SELF-CONTAINED WIRE FEEDER, MIG GUN, INCLUDES ARGON 75% CARBON DIOXIDE 25% GAS BOTTLE. S/N: LG180349B	🔒 Subscribe
			PRESS BRAKE DIES, A QUANTITY A SHORT DIES, VARIOUS SIZES AND TYPES, BOTTOM AND TOP DIES, V DIES AND GOOSENECK DIES, STANDARD TANG.	🔒 Subscribe
	BOBCAT	1812X	BOBCAT 1812X SNOWBLOWER 64 SNOWBLOWER, 711900421 (S/N: 711900421), 67 INCH WIDTH, UNIVERSAL SKID LOADER COUPLER, HYDRAULIC SWIVEL OF SHOOT, USE A STANDARD FLOW HYDRAULIC SYSTEM, PURCHASE NEW, LIMITED USAGE, VERY GOOD	🔒 Subscribe
	GEMA	CG01	GEMA CG01 POWER UNIT (S/N: 13101-00655), (2) GEMA ELECTROSTATIC PAINT GUNS AND POWDER DISPENSER, EASY SELECT GUNS, SERIAL NUMBER 1330125220, MOUNTED ON A GEMA CART.	🔒 Subscribe
			PRESS BRAKE DIES, ASSORTED SIZES AND TYPES, THE LENGTHS VARY, GOOSENECK, V DIE, STANDARD TANG.	🔒 Subscribe
			ELECTRIC COPPER CABLE	🔒 Subscribe
	DIACRO	16-72	DIACRO 16-72 PRESS BRAKE HYDRO MECHANICAL, 35 TON, 6 FOOT OVERALL 62 INCHES BETWEEN THE UPRIGHTS, FRONT OPERATED MECHANICAL BACK GAUGE, MANUAL RAM ADJUSTMENT, BANNER LIGHT CURTAINS, OPERATIONAL. S/N: JE1019	🔒 Subscribe
1996	E.G.HELLER	2000 E Z3023	1996 E.G.HELLER 2000 E Z3023 ANGLE ROLL S/N: 96G-0006, 220 V THREE PHASE., SHAFTS DIAMETER 1.18 INCHES, SHAFT LENGTH 2.9 INCHES, ROLLS DIAMETER 5 INCHES, MAXIMUM OPENING BETWEEN ROLLED 3.8 INCHES, WORKING HEIGHT 34 INCHES, MACHINE WEIGHS APPROXIMATELY 364 POUNDS.	🔒 Subscribe
	SQUARE D		SQUARE D I LINE BREAKERS, 30 UP TO 225 AMP.	🔒 Subscribe
	FMB	TRITON	FMB TRITON HORIZONTAL BAND SAW, 220 V THREE PHASE, MITERING BASE, WET TYPE, 10 X 14, MANUAL VISE. S/N: 81048	🔒 Subscribe
	MARATHON		MARATHON GENERATORS 175KW MISSING SOME SHEET METAL PARTS BRAND NEW.	🔒 Subscribe
			PRESS BRAKE DIES, ASSORTED SIZES ASSORTED LENGTHS, INCLUDING FLATTENING DIES, V DIES, ACUTE ANGLE, STANDARD TANGS.	🔒 Subscribe
	SQUARE D		ASSORTED SQUARE D BREAKERS, 200 UP TO 2000 AMP, CUTLER HAMMER 1600 AMP POWER BREAKER STORED ENERGY, VARIOUS CONDITIONS, ALL ARE USED.	🔒 Subscribe
			COPPER CABLE, MIXED LOT VARIOUS SIZES AND TYPES.	🔒 Subscribe
			ELECTRIC COPPER CABLE	🔒 Subscribe
			PRESS BRAKE DIES, 12 FOOT LENGTH, 2 INCH OPENING, TOP AND BOTTOM, V DIES, STANDARD TANG.	🔒 Subscribe
	WEATHERHEAD	COLL-O-CRIMP	WEATHERHEAD COLL-O-CRIMP HOSE CRIMPER, SELF-CONTAINED HYDRAULICS, DIES UP TO 1 INCH, INCLUDES CUSTOMIZED WORKBENCH, MILWAUKEE ABRASIVE CHOP SAW.	🔒 Subscribe
			WIRE - ELECTRIC COPPER CABLE.	🔒 Subscribe
	MILLER	XMT 304	MILLER XMT 304 DC INVERTER ARC WELDER, 230/460 V SINGLE OR THREE PHASE, 300 AMP, 60% DC, VOLTAGE AND AMPERAGE ADJUSTMENT, S/N: KJ143439 INCLUDES THE MILLER SUPER S32P VOLTAGE SENSING WIRE FEEDER, WITH TWECO MIG GUN, AND ALSO INCLUDES MILLER SPOOLMATIC 30 AA ALUMINUM SPOOL GUN, ENTIRE SYSTEM IS MOUNTED ON A 4 CASTER CART.	🔒 Subscribe
			SHOP BUILT STEEL STORAGE RACKS, 113 INCHES LEFT RIGHT 80 INCHES FRONT TO BACK, (8) ROLLOUT SHELVES, DESIGNED TO HANDLE 4 X 8 SHEETS, BOLTED TO THE FLOOR	🔒 Subscribe
			PRESS BRAKE DIES, 8 FOOT LENGTH, 2 INCH OPENING, TOP AND BOTTOM, V DIES.	🔒 Subscribe
	SQUARE D	QO AND QOU	SQUARE D QO AND QOU BREAKERS, 1-, 2- AND 3-POLE, 15 UP TO 100 A, APPROXIMATELY (100) PIECES.	🔒 Subscribe
	GULL WING	GW501MLI-23100	PORTABLE DISTRIBUTION STATION - GULL WING POWER DISTRIBUTION PORTABLE STATION, MODEL GW501MLI-23100, 120/240 V, SINGLE PHASE 4 WIRE, 50 AMP, TYPE 3R, SQUARE D BREAKERS, RECEPTACLES FOR 50 AMP, 30 AMP, 20 AMP, INCLUDES POWER CORDS. S/N: H9 911225	🔒 Subscribe
	EAGLE	1962	(2) EAGLE MODEL 1962, 60 GALLON FLAMMABLE STORAGE CABINETS	🔒 Subscribe
	MILLER	MILLERMATIC 300	MILLER MILLERMATIC 300 MIG WELDER, 200/230/460 V, THREE PHASE, FOUR ROLL INTERNAL FEEDER, LED READOUT FOR WIRE SPEED AND VOLTAGE, INCLUDES MIG GUN. INCLUDES GAS BOTTLE 75% ARGON 25% CARBON DIOXIDE. S/N: LC556114	🔒 Subscribe
	SQUARE D	ATV 31HU40M3X5	(4) ATV 31HU40M3X5 HP SQUARE D VFD, (2) USED, ASSORTED REACTORS 18 AMP	🔒 Subscribe
	SQUARE D		(2) SQUARE D BREAKERS, 800 AMP 3-POLE, USED.	🔒 Subscribe
			CUSTOM BUILT SAND DISPENSER, MOUNTED ON FOUR LEGS, 118 INCHES LEFT TO RIGHT, 46 INCHES FRONT TO BACK, STEEL HOPPER, BOTTOM DISCHARGE, MANUAL GATE, USED IN CONJUNCTION WITH THE SAND BLAST POT.	🔒 Subscribe
			ELECTRICAL WIRE, ASSORTED TYPES AND SIZES, ALL COPPER.	🔒 Subscribe
	SQUARE D		GULL WING POWER DISTRIBUTION CENTER, SQUARE D BREAKERS, 50 AMP, 30 AMP, 20 AMP RECEPTACLES, INCLUDES POWER CABLE.	🔒 Subscribe
	MARATHON	500 KW	MARATHON 500 KW GENERATOR, HAS NOT FUNCTION FOR SEVERAL YEARS, UNIT 5544 HOURS ON UNIT, WAS FUNCTIONING PROPERLY WHEN TAKEN OUT OF SERVICE DUE TO ENGINE PROBLEM.	🔒 Subscribe
			PRESS BRAKE DIES, TOP GOOSENECK, 10 FOOT LENGTH, 3/4 WIDTH.	🔒 Subscribe
			STEEL STORAGE RACK, 22 LEFT TO RIGHT, FRONT TO BACK 80, CUSTOM BUILT FOR 5 X 10 SHEETS, THIS IS BOLTED TO THE FLOOR, AND WILL HAVE TO BE CUT APART FOR REMOVAL.	🔒 Subscribe
			SHOP BUILT FLUID TANKS, (3), 70 GALLON MOLDED PLASTIC TANKS, WITH (2) ALEMITE PNEUMATIC PUMPS, (1) FLOWJET PUMP, (1) FLOWJET AIR PUMP HAS A METER NOZZLE, THIS IS TRANSPORTABLE WITH A FORKLIFT.	🔒 Subscribe
			ALUMINUM ASSORTED SIZES OF ALUMINUM SHEETS MOST ARE DROPS, VARIOUS SIZES AND THICKNESS. APPROXIMATELY 1680 POUNDS.	🔒 Subscribe
			(3) NEW ELECTRICAL WIRE, ASSORTED, 500 FOOT ROLLS.	🔒 Subscribe

2004 PIRANHA 17512

PRESSES & FORMING

2004 PIRANHA 17512 PRESS BRAKE 175 TON CAPACITY, 12 OVERALL, 10' 6 BETWEEN THE HOUSINGS, 6 RISER BLO...

Hammer Price: 🔒

TIMESAVERS 2211-23-0

METALWORKING & FABRICATION EQUIPMENT

TIMESAVERS 2211-23-0 BELT SANDER, 20/10 HP 460 V THREE PHASE, 36 INCH BELT, DRY TYPE, SINGLE BELT, P...

Hammer Price: 🔒

PIRANHA M1/4-10

METALWORKING & FABRICATION EQUIPMENT

PIRANHA M1/4-10 HYDRAULIC SHEAR, 10 X 1/4" CAPACITY, PROGRAMMABLE FRONT OPERATED POWER BACK GAUGE, ...

Hammer Price: 🔒

2000 INTERNATIONAL 9100 I 6X4

TRUCKS, TRAILERS & VEHICLES

2000 INTERNATIONAL 9100 I 6X4 TRUCK TRACTOR DAY CAB, 52,000 POUND GVWR, 12,000 POUND FRONT AXLE, 40,...

Hammer Price: 🔒

TOYOTA 7FGU 25

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TOYOTA 7FGU 25 FORKLIFT, RATED AT 3750 POUND CAPACITY, TRIPLE STAGE FREE LIFT MAST, 189 INCH MAST HE...

Hammer Price: 🔒

MISC

STEEL STOCK, ASSORTED STRUCTURAL STEEL, INCLUDES TUBE STEEL, RECTANGLES, CHANNELS, SQUARES, FLATS, A...

Hammer Price: 🔒

EDWARDS JAWS IV25

METALWORKING & FABRICATION EQUIPMENT

EDWARDS JAWS IV25 IRON WORKER - NOTCHING 5/16 X 2 X 3, PUNCHES 1 INCH DIAMETER HOLE IN 5/8 PLATE, MA...

Hammer Price: 🔒

CLAUSING COLCHESTER 17 INCH

METALWORKING & FABRICATION EQUIPMENT

CLAUSING COLCHESTER 17 INCH ENGINE LATHE S/N: 7/0219/11911, 12 INCH 3 JAW CHUCK, 14" COMBINATION 4 J...

Hammer Price: 🔒

MISC

1381 LBS. COPPER BARS, (10 ) 1/4 BY 5 WIDTH BY 12, 1/4 BY 2 WIDTH 12, 1/4 X 1 12, 4 INCH 4 X 1/4 X 1...

Hammer Price: 🔒

BLU-SURF

MISC

BLU-SURF BURN OFF OVEN, VOLTAGE 120 V, SINGLE PHASE, NATURAL GAS FUEL, 15 A, NATURAL GAS PRESSURE TW...

Hammer Price: 🔒

CHICAGO DRIES KRUMP BP0-812-6

METALWORKING & FABRICATION EQUIPMENT

CHICAGO DRIES KRUMP BP0-812-6 APRON BRAKE, 8 FOOT WITH 12 GAUGE CAPACITY, WITH A FULL SET OF FINGERS...

Hammer Price: 🔒

HYSTER H 200ES

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

HYSTER H 200ES FORKLIFT INTEGRAL SIDE SHIFTER, WEIGHT OF FORKLIFT 26,800 POUNDS, 182 MAST HEIGHTS, R...

Hammer Price: 🔒

MISC

ELECTRIC COPPER CABLE....

Hammer Price: 🔒

GULL WING GW2801MLJ

ELECTRICAL AND POWER GENERATION EQUIPMENT

GULL WING GW2801MLJ POWER DISTRIBUTION CENTER, 120/240 V SINGLE PHASE 4 WIRE, 225 AMP, TYPE THREE R,...

Hammer Price: 🔒

MILLER MILLERMATIC 350P

WELDING & CUTTING

MILLER MILLERMATIC 350P WIRE WELDER 200/230/460 V, SINGLE OR THREE PHASE, 350 AMP, HAS VOLTAGE AND W...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

PRESS BRAKE DIES, A QUANTITY A SHORT DIES, VARIOUS SIZES AND TYPES, BOTTOM AND TOP DIES, V DIES AND ...

Hammer Price: 🔒

BOBCAT 1812X

EARTH MOVING EQUIPMENT

BOBCAT 1812X SNOWBLOWER 64 SNOWBLOWER, 711900421 (S/N: 711900421), 67 INCH WIDTH, UNIVERSAL SKID LOA...

Hammer Price: 🔒

GEMA CG01

MISC

GEMA CG01 POWER UNIT (S/N: 13101-00655), (2) GEMA ELECTROSTATIC PAINT GUNS AND POWDER DISPENSER, EAS...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

PRESS BRAKE DIES, ASSORTED SIZES AND TYPES, THE LENGTHS VARY, GOOSENECK, V DIE, STANDARD TANG....

Hammer Price: 🔒

MISC

ELECTRIC COPPER CABLE...

Hammer Price: 🔒

DIACRO 16-72

PRESSES & FORMING

DIACRO 16-72 PRESS BRAKE HYDRO MECHANICAL, 35 TON, 6 FOOT OVERALL 62 INCHES BETWEEN THE UPRIGHTS, FR...

Hammer Price: 🔒

1996 E.G.HELLER 2000 E Z3023

METALWORKING & FABRICATION EQUIPMENT

1996 E.G.HELLER 2000 E Z3023 ANGLE ROLL S/N: 96G-0006, 220 V THREE PHASE., SHAFTS DIAMETER 1.18 INCH...

Hammer Price: 🔒

SQUARE D

ELECTRICAL AND POWER GENERATION EQUIPMENT

SQUARE D I LINE BREAKERS, 30 UP TO 225 AMP....

Hammer Price: 🔒

FMB TRITON

WOODWORKING EQUIPMENT

FMB TRITON HORIZONTAL BAND SAW, 220 V THREE PHASE, MITERING BASE, WET TYPE, 10 X 14, MANUAL VISE. S/...

Hammer Price: 🔒

MARATHON

ELECTRICAL AND POWER GENERATION EQUIPMENT

MARATHON GENERATORS 175KW MISSING SOME SHEET METAL PARTS BRAND NEW....

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

PRESS BRAKE DIES, ASSORTED SIZES ASSORTED LENGTHS, INCLUDING FLATTENING DIES, V DIES, ACUTE ANGLE, S...

Hammer Price: 🔒

SQUARE D

ELECTRICAL AND POWER GENERATION EQUIPMENT

ASSORTED SQUARE D BREAKERS, 200 UP TO 2000 AMP, CUTLER HAMMER 1600 AMP POWER BREAKER STORED ENERGY, ...

Hammer Price: 🔒

MISC

COPPER CABLE, MIXED LOT VARIOUS SIZES AND TYPES....

Hammer Price: 🔒

MISC

ELECTRIC COPPER CABLE...

Hammer Price: 🔒

PRESSES & FORMING

PRESS BRAKE DIES, 12 FOOT LENGTH, 2 INCH OPENING, TOP AND BOTTOM, V DIES, STANDARD TANG....

Hammer Price: 🔒

WEATHERHEAD COLL-O-CRIMP

MISC

WEATHERHEAD COLL-O-CRIMP HOSE CRIMPER, SELF-CONTAINED HYDRAULICS, DIES UP TO 1 INCH, INCLUDES CUSTOM...

Hammer Price: 🔒

MISC

WIRE - ELECTRIC COPPER CABLE....

Hammer Price: 🔒

MILLER XMT 304

WELDING & CUTTING

MILLER XMT 304 DC INVERTER ARC WELDER, 230/460 V SINGLE OR THREE PHASE, 300 AMP, 60% DC, VOLTAGE AND...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

SHOP BUILT STEEL STORAGE RACKS, 113 INCHES LEFT RIGHT 80 INCHES FRONT TO BACK, (8) ROLLOUT SHELVES, ...

Hammer Price: 🔒

PRESSES & FORMING

PRESS BRAKE DIES, 8 FOOT LENGTH, 2 INCH OPENING, TOP AND BOTTOM, V DIES....

Hammer Price: 🔒

SQUARE D QO AND QOU

ELECTRICAL AND POWER GENERATION EQUIPMENT

SQUARE D QO AND QOU BREAKERS, 1-, 2- AND 3-POLE, 15 UP TO 100 A, APPROXIMATELY (100) PIECES....

Hammer Price: 🔒

GULL WING GW501MLI-23100

ELECTRICAL AND POWER GENERATION EQUIPMENT

PORTABLE DISTRIBUTION STATION - GULL WING POWER DISTRIBUTION PORTABLE STATION, MODEL GW501MLI-23100,...

Hammer Price: 🔒

EAGLE 1962

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(2) EAGLE MODEL 1962, 60 GALLON FLAMMABLE STORAGE CABINETS...

Hammer Price: 🔒

MILLER MILLERMATIC 300

WELDING & CUTTING

MILLER MILLERMATIC 300 MIG WELDER, 200/230/460 V, THREE PHASE, FOUR ROLL INTERNAL FEEDER, LED READOU...

Hammer Price: 🔒

SQUARE D ATV 31HU40M3X5

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

(4) ATV 31HU40M3X5 HP SQUARE D VFD, (2) USED, ASSORTED REACTORS 18 AMP...

Hammer Price: 🔒

SQUARE D

ELECTRICAL AND POWER GENERATION EQUIPMENT

(2) SQUARE D BREAKERS, 800 AMP 3-POLE, USED....

Hammer Price: 🔒

MISC

CUSTOM BUILT SAND DISPENSER, MOUNTED ON FOUR LEGS, 118 INCHES LEFT TO RIGHT, 46 INCHES FRONT TO BACK...

Hammer Price: 🔒

MISC

ELECTRICAL WIRE, ASSORTED TYPES AND SIZES, ALL COPPER....

Hammer Price: 🔒

SQUARE D

ELECTRICAL AND POWER GENERATION EQUIPMENT

GULL WING POWER DISTRIBUTION CENTER, SQUARE D BREAKERS, 50 AMP, 30 AMP, 20 AMP RECEPTACLES, INCLUDES...

Hammer Price: 🔒

MARATHON 500 KW

ELECTRICAL AND POWER GENERATION EQUIPMENT

MARATHON 500 KW GENERATOR, HAS NOT FUNCTION FOR SEVERAL YEARS, UNIT 5544 HOURS ON UNIT, WAS FUNCTION...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

PRESS BRAKE DIES, TOP GOOSENECK, 10 FOOT LENGTH, 3/4 WIDTH....

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL STORAGE RACK, 22 LEFT TO RIGHT, FRONT TO BACK 80, CUSTOM BUILT FOR 5 X 10 SHEETS, THIS IS BOLT...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

SHOP BUILT FLUID TANKS, (3), 70 GALLON MOLDED PLASTIC TANKS, WITH (2) ALEMITE PNEUMATIC PUMPS, (1) F...

Hammer Price: 🔒

MISC

ALUMINUM ASSORTED SIZES OF ALUMINUM SHEETS MOST ARE DROPS, VARIOUS SIZES AND THICKNESS. APPROXIMATEL...

Hammer Price: 🔒

ELECTRICAL AND POWER GENERATION EQUIPMENT

(3) NEW ELECTRICAL WIRE, ASSORTED, 500 FOOT ROLLS....

Hammer Price: 🔒

1 2 3 4 5 ... 12 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Gull Wing Industries Inc Industrial Sheet Metal Fabrication

Save to Project Folder

Print Options

Save to Project Folder