JAMI Enterprise Inc and MORE 30 HIGH END CNC MACHINES HWACHEON FADAL TORNOSDAEWOO STAR CITIZEN NOMURADOOSAN SUMMIT OKUMA HAAS

2016 DOOSAN DNM 5700 3-AXIS PRECISION VERTICAL MACHINING CENTER S/N: MV0091-000342, SPECIFICATIONS, TRAVELS:, X-AXIS: 41.3?, Y-AXIS: 22.4?, Z-AXIS: 20.1?, RAPID TRAVERSE RATES X & Y AXIS: 1417 IPM, RAPID TRAVERSE RATES Z AXIS: 1181 IPM, CUTTING FEED RATES: 590 IPM, SPINDLE NOSE TO TABLE (MIN.- MAX.): 5.9? 26?, TABLE SIZE: 51.2? X 22.4?, NUMBER OF STD T-SLOTS: 4, T-SLOT WIDTH: 4.9? X 0.7?, MAX WEIGHT ON TABLE: 2204 LBS, TAPER SIZE: 40 BIG PLUS, SPEED RANGE: 12,000 RPM, AUTOMATIC TOOL CHANGER: 30 SIDE MOUNTED, MAX TOOL WEIGHT: 17.6 LBS, MAX TOOL DIAMETER: 3.1? - 4.9?, MAX TOOL LENGTH: 11.81?, TOOL CHANGING TIME : 1.2 SECONDS, AIR REQUIRED: 80 PSI, 4 SCFM, POWER: 220V / 30 KVA / 3-PHASE, OVERALL DIMENSIONS: 131? X 95? X 117? HIGH, WEIGHT: 15,430 LBS., EQUIPPED WITH:, LNS CHIP CONVEYOR, DOOSAN-FANUC ISERIES CONTROL, REMOTE HAND WHEEL, RIGID TAPPING, TELESCOPIC WAY COVERS, USB DRIVE, EQUIPPED WITH, LNS CHIP CONVEYOR, DOOSAN-FANUC ISERIES CONTROL, REMOTE HAND WHEEL, RIGID TAPPING, TELESCOPIC WAY COVERS, USB DRIVE, SPINDLE CHILLER, RENISHAW RECEIVER (NO PROBE,

1998 SUMMIT HTM-4 PRECISION HORIZONTAL BORING MILL SPECIFICATIONS: HTM4, SPINDLE:, DIAMETER OF SPINDLE 4.13?, TAPER OF SPINDLE #50, NUMBER OF SPINDLE SPEEDS INFINITELY VARIABLE, SPINDLE SPEED RANGE 5-1800 RPM, TRAVELS:, SPINDLE TRAVEL Z AXIS 31.5", VERTICAL TRAVEL Y AXIS 78.74", CROSS TRAVEL OF TABLE X AXIS 86.6", SADDLE TRAVEL W AXIS 64.96", NUMBER OF FEEDS 16, FEED RANGE PER REVOLUTION .0151-98 IPM, RAPID TRAVERSE IN ALL DIRECTION 157 IPM, ROTARY TABLE:, POSITIONING ONLY 4 X 90", SIZE OF TABLE 55"X63", MAXIMUM WEIGHT OF WORKPIECE 13,200 LBS., MAIN DRIVE MOTOR: 22 HP, ELECTRICS: 440/3/60, DIMENSIONS (LXWXH): 256"X203"X180", WEIGHT: (APPROXIMATE) 42,900 LBS., EQUIPPED WITH, BUILT IN ROTARY TABLE, 4 AXIS DIGITAL READOUTS, PENDANT CONTROLS

2012 BROTHER TC-R2B CNC DRILL TAP VERTICAL MACHINING CENTER S/N: 111879SPECIFICATIONS: TABLE SIZE: 23.6" X 16.5" (EACH SIDE)TABLE CAPACITY: 256 LBS (ONE SIDE)TABLE POSITION TIME: 2.9 S/180 DEG.X-AXIS TRAVEL: 16.5",Y-AXIS TRAVEL: 12.8", Z-AXIS TRAVEL: 12" X-AXIS RAPID FEEDRATE: 1969 IPM Y-AXIS RAPID FEEDRATE: 1969 IPM Z-AXIS RAPID FEEDRATE: 1969 IPM CUTTING RATE: 394 (X, Y) 787 (Z) SPINDLE SPEED: 10,000 IPM SPINDLE TAPER: 30 MAIN MOTOR: 15 HP TRAVEL DISTANCE X-AXIS 420MM Y-AXIS 320MM Z-AXIS 305MM DISTANCE FROM TABLE TOP SURFACE TO SPINDLE AND FACE TABLE WORK AREA 200-505MM 8-20 WORK AREA SIZE 600 X 300 23.6 X 11.8 MAX. LOAD WEIGHT (UNIFORM LOAD) 120 KG. SPINDLE SPEED (MIN) 10-10,000 SPINDLE SPEED WHEN TAPPING (MIN) 6,000 MAX. SPINDLE TAPER HOLE 7/24 TAPER NO.30 FEED RATE RAPID TRAVERSE RATE (M/MIN) 50X50X50 M/MIN CUTTING FEED RATE (M/MIN) 1-10,000 MM/MIN Z AXIS 1-20,000 RPM ATC TOOL SHANK TYPE MAS.BT30 PULL STUD TYPE MAS.P30T-2 TOOL STORAGE CAPACITY (PCS) 14 MAX. TOOL LENGTH 200MM DISTANCE FROM TAPER GAUGE/MAX. DIAMETER 30-150/D80 MM 160-200/D40 MM MAX. TOOL WEIGHT (TOTAL WEIGHT 25) 3.0 KG. TOOL SELECTION METHOD RANDOMS SHORT CUT TOOL CHANGE TIME TOOL TO TOOL .09 CHIP TO CHIP 1.7 MOTOR SPINDLE MOTOR (CONTINUOUS FOR 30 MIN.) 10.1/6,7 FEED AXIS MOTOR 1.0 KW XY 1-5 KW Z (CONT.) MACHINE DIMENSIONS HEIGHT 2,588MM INSTALLATION ARE 1,617 X 2,658 MM (WHEN CONTROL BOX IS OPEN) 1,456 X 2,644 MM WEIGHT (INCLUDING BOX AND SPLASH GUARD) 2600 KG EQUIPPED WITH EQUIPPED WITH CNC-BOO CNC CONTROL 14 POSITION TURRET 180-DEGREE PALLET CHANGER CHIP CONVEYOR COOLANT SYSTEM

DRILLMATION BOREMATION KNEE TYPE GUN DRILL, SPECIFICATIONS, TABLE 48" X 18", MAX DIA. HOLE DRILLED 1.25", MAX DRILLING DEPTH 36", VERTICAL ADJUSTMENT 9", # SPINDLES 1, SPINDLE SPEED 2260 RPM, MOTOR 12.5 HP, EQUIPPED WITH, DRO PRO5 3M DIGITAL READ OUT, COOLANT SYSTEM, S/N: 408

2010 CHEVALIER FMG-1632 CNC-HD PRECISION CREEP FEED PROFILE GRINDER S/N: HD975001, SPECIFICATIONS, PRODUCT DESCRIPTION, DETAILED DESCRIPTION: HIGH-EFFICIENCY CNC FORMING GRINDER FMG-1632CNC-HD (CNC SERIES), FMG-1632CNC-HD FORMING GRINDING MACHINE SERIES FUYU COMPANY AIMS AT AEROSPACE AND HIGH-PRECISION DIFFICULT-TO-MACHINE PARTS., WITH MORE THAN 30 YEARS OF EXPERIENCE IN GRINDING TECHNOLOGY, WE HAVE DEVELOPED A HIGH-EFFICIENCY AND HIGH-PRECISION THREE-AXIS MOVING COLUMN POWERFUL HEAVY-CUTTING CNC MILL, THE BED AND WORKTABLE ARE FIXED, AND THE MACHINING ACCURACY IS NOT AFFECTED BY THE WEIGHT OF THE WORKPIECE AND THE SIZE OF THE FIXTURE. VERY SUITABLE FOR, GRINDING THE ROOTS OF AIRCRAFT TURBINE BLADES, STEAM TURBINE BLADES, AND OTHER DIFFICULT-TO-GRIND MATERIAL PARTS WITH COMPLEX SHAPES, SHAPED GRINDING ENABLES THE GRINDER TO EXERT GREATER PROCESSING FUNCTIONS, ACHIEVING HIGH PERFORMANCE, HIGH PRECISION, AND EASY OPERATION, THE CHARACTERISTICS., THE MOVABLE COLUMN TYPE CNC FORMING GRINDER PROVIDES A FASTER PROCESSING CYCLE AND GREATLY IMPROVES THE PRODUCTION EFFICIENCY., THE FIXED WORKBENCH AND MOVABLE COLUMN DESIGN ENABLE THE MACHINE TO CARRY A WEIGHT OF UP TO 3326LBS (1512KG),, THE GRINDING WIDTH ALSO REACHES 16 INCHES (410MM)., UNDER THIS PROCESSING CONDITION, THE MACHINE STILL MAINTAINS STABLE GRINDING ACCURACY, AND THE REPEATABILITY IS EVEN AS HIGH AS, 0.0001"(0.001MM) THIS MACHINE IS ALSO APPLICABLE AND OPTIONAL VERTICAL SPINDLE., MOVING COLUMN TYPE, HEAVY CUTTING SLOW FEED FUNCTION, TABLE SIZE (WIDTH X LENGTH): 410 X 810 MM, MAXIMUM LOAD OF TABLE: 1,500KG, SPINDLE MOTOR: UP TO 75HP, SPINDLE SPEED: 6,000RPM, WHEEL HUB, ELECTROMAGNET, ROTARY ELECTROMAGNET, PRECISION VICE, SPINDLE MOTOR (50HP), ADJUSTABLE ANGLE DRESSER, DOUBLE-HEADED ROLLER DRESSER (DIAMOND ROLLER NOT INCLUDED), SINGLE-HEAD ROLLER DRESSER (DIAMOND ROLLER NOT INCLUDED), DOUBLE-SUPPORT SINGLE-HEAD ROLLER DRESSER (DIAMOND ROLLER NOT INCLUDED), WHEEL BALANCE PLATFORM, WHEEL HEAD DIAMOND ROLLER DRESSER (DIAMOND ROLLER NOT INCLUDED), PAPER BELT ELECTROMAGNETIC WATER FILTER (WITH A ROLL OF FILTER PAPER), PAPER BELT WATER FILTER (WITH A ROLL OF FILTER PAPER), OIL TEMPERATURE COOLING REGULATOR, SILENT AIR COMPRESSOR, AUTOMATIC BALANCE CORRECTOR, HORIZONTAL INDEX PLATE (CNC CONTROL) (THIS INDEX PLATE IS DRIVEN BY AC SERVO MOTOR AND CONTROLLED BY CNC), EQUIPPED WITH, CHEVALIER FMG-1632CNC-HD, PRODUCTION CNC GRINDERS, FANUC 18IMB 3-AXES CNC CONTROL WITH 10.4 COLOR LCD, 4 FULLY AUTOMATIC GRINDING CYCLES: RAPID APPROACH, ROUGH GRINDING, FINE GRINDING, AND WHEEL DRESSING WITH AUTOMATIC COMPENSATION., SPINDLE SUPPORTED BY 6 ABEC CLASS 7 (P4) SUPER PRECISION ANGULAR CONTACT BALL BEARINGS PLUS 1 SET OF N-N NEEDLE ROLLER BEARING IN FRONT OF SPINDLE., TSUBAKI CLASS C2 (50 MM) PRECISION BALL SCREWS ON CROSS-FEED AND ELEVATING DRIVES., TSUBAKI CLASS C2 (63 MM) PRECISION BALL SCREWS ON LONGITUDINAL DRIVE., AC SERVO MOTORS FANUC: 2.1KW ON Y & Z AXES, 7.3KW ON X AXIS, FULLY ENCLOSED SPLASH GUARD, SPECIFICATIONS, TABLE SIZE (W X L): 400 X 810MM (16 X 32), T-SLOT (NO. X W X DIS.): 5 X 18 X 100MM (5 X 0.709 X 3.937), MAX. TABLE LOAD: 1,500KG (3,306 LBS.), COLUMN MOVING, CAPABLE OF CREEP FEED FUNCTION, TABLE SPEED:, X-AXIS: 10-25,00MM/MIN (0-88FPM), Y-AXIS: 0-3,800MM/MIN (0-12.5FPM), Z-AXIS: 0-4,000MM/MIN (0-13FPM), SPINDLE SPEED: 1,800RPM (OPTIONAL 6,000RPM), SPINDLE MOTOR: UP TO 75HP, DUAL FACE ROTARY DIAMOND DRESSER, AUTOMATIC DYNAMIC BALANCING SYSTEM, HIGH PRESSURE COOLANT SYSTEM, HAND WHEEL FOR PREPARATION

2010 FANUC ROBODRILL ALPHA T21IFLA CNC DRILL TAP VERTICAL MACHINING CENTER W/PALLET CHANGER S/N: P105XH229, SPECIFICATIONS, ELECTRICS: 220 VOLT; 3 PHASE; 50-60 CYCLE; 11 KVA, FEATURES AND SPECIFICATIONS, ...CNC CONTROL: FANUC SERIES 31I-A5, ...TABLE SIZE: 33.5" X 16.1", ...TABLE CAPACITY:, ...TRAVELS:, ......X-AXIS: 27.5", ......Y-AXIS: 15.75", ......Z-AXIS: 12.99", ...SPINDLE SPECIFICATIONS:, ......SPEED: 10,000 RPM, ......TAPER: BT-30, ...TOOL CHANGER CAPACITY: 21 SLOTS, ...RAPID TRAVERSE RATE: 2,125 IPM, ...TOOL CHANGE TIME: 0.9 SECONDS, ...A-B PALLET SHUTTLE UNIT, ...COOLANT SYSTEM, ROBODRILL DIMENSIONS (APPROX.): 110" X 80" X 96", OVERALL EQUIPMENT WEIGHT (APPROX.): 6,000 LBS.

2016 HAAS DT-2 4-AXIS CNC DRILL/TAP/MILL VERTICAL MACHINING CENTER S/N: 1135274, SPECIFICATIONS, TRAVELS S.A.E METRIC, X AXIS 28.0 IN 711 MM, Y AXIS 16.0 IN 406 MM, Z AXIS 15.5 IN 394 MM, SPINDLE NOSE TO TABLE (~ MAX) 21.5 IN 546 MM, SPINDLE NOSE TO TABLE (~ MIN) 6.0 IN 152 MM, SPINDLE S.A.E METRIC, MAX RATING 15.0 HP 11.2 KW, MAX SPEED 10000 RPM 10000 RPM, MAX TORQUE 46.0 FT-LB. @ 1700 RPM 62.0 NM @ 1700 RPM, DRIVE SYSTEM INLINE DIRECT-DRIVE INLINE DIRECT-DRIVE, TAPER BT30 BT30, BEARING LUBRICATION AIR / OIL INJECTION AIR / OIL INJECTION, COOLING AIR COOLED AIR COOLED, TABLE S.A.E METRIC, LENGTH 34.0 IN 864 MM, WIDTH 15.0 IN 381 MM, T-SLOT WIDTH 0.626 IN TO 0.630 IN 15.90 MM TO 16.00 MM, T-SLOT CENTER DISTANCE 4.92 IN 125 MM, NUMBER OF STD T-SLOTS 3 3, MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED) 250 LB. 113 KG, FEEDRATES S.A.E METRIC, MAX CUTTING 1200 IPM 30.5 M/MIN, RAPIDS ON X 2400 IPM 61.0 M/MIN, RAPIDS ON Y 2400 IPM 61.0 M/MIN, RAPIDS ON Z 2400 IPM 61.0 M/MIN, AXIS MOTORS S.A.E METRIC, MAX THRUST X 2550 LB. 11343 N, MAX THRUST Y 2550 LB. 11343 N, MAX THRUST Z 4200 LB. 18683 N, TOOL CHANGER S.A.E METRIC, TYPE SMTC SMTC, CAPACITY 20+1 20+1, MAX TOOL DIAMETER (FULL) 2.0 IN 51 MM, MAX TOOL LENGTH (FROM GAGE LINE) 7 IN 178 MM, CHIP-TO-CHIP (AVG) 1.6 S 1.6 S, TAPPING S.A.E METRIC, MAX TAPPING SPEED 5000 RPM 5000 RPM, GENERAL S.A.E METRIC, COOLANT CAPACITY 55 GAL 208 L, AIR REQUIREMENTS S.A.E METRIC, AIR REQUIRED 4 SCFM @ 100 PSI 113 L/MIN @ 6.9 BAR, INLINE AIR HOSE 3/8 IN 3/8 IN, COUPLER (AIR) 3/8 IN 3/8 IN, AIR PRESSURE MIN 80 PSI 5.5 BAR, DIMENSIONS - SHIPPING S.A.E METRIC, DOMESTIC PALLET 100 IN X 91 IN X 99 IN 254 CM X 231 CM X 251 CM, EXPORT PALLET 100 IN X 91 IN X 99 IN 254 CM X 231 CM X 251 CM, WEIGHT 5350 LB. 2427.0 KG, ELECTRICAL SPECIFICATION S.A.E METRIC, DRIVE SYSTEM INLINE DIRECT-DRIVE INLINE DIRECT-DRIVE, SPINDLE POWER 15.0 HP 11.2 KW, INPUT AC VOLTAGE (3 PHASE) - LOW 220 VAC 220 VAC, FULL LOAD AMPS (3 PHASE) - LOW 40 A 40 A, INPUT AC VOLTAGE (3 PHASE) - HIGH* 440 VAC 440 VAC, FULL LOAD AMPS (3 PHASE) - HIGH* 20 A 20 A, EQUIPPED WITH, HAAS CNC CONTROL, 20 POSITION TOOL CHANGER, 15,000 RPM SPINDLE, COOLANT SYSTEM, 4TH AXIS ROTARY TABLE, PROBE, PCOOL, REMOTE JOG HANDLE, HIGH SPEED MACHINING, RIGID TAP, ETHERNET, CHIP AUGER, MFG 12/2016, DELIVERED NEW IN 2017

GENIE IWP-24 ELECTRIC PLATFORM LIFT, SPECIFICATIONS, GENIE SINGLE MAN LIFT, DC MODEL IWP-24, 24-FEET PLATFORM HEIGHT, BATTERY-POWERED WITH ONBOARD CHARGER, MAX LOAD 350 LBS., NEW BATTERY 5/2024 S/N: 4095-2684

2004 THERMWOOD CS40 3-AXIS CNC ROUTER, S/N CS400430904, SPECIFICATIONS, TABLE W 48", TABLE L 96", POWER 10 HP, RPM 18,000 RPM, TAPER 30, #AXIS 3, CONTROL CNC QCORE SUPER CONTROLLER, MOVING TABLE STYLE, TABLE SIZE 48" X 96", TRAVELS, X 100", Y 61", Z 7.8", FEED RATES, X 2100 IPM, Y 1200 IPM, Z 1200 IPM, SPINDLE TYPE HSD MODEL 919 BT30, ROUTER 10.5 HP, ROUTER SPEED 5000-18,000 RPM, EQUIPPED WITH, QCORE CNC SUPER CONTROLLER, THN OS SOFTWARE VERSION #9.0, 4' X 8' TABLE, 5 POSITION AT THE HEAD TOOL CHANGER, 4 POSITION BAR TYPE TOOL CHANGER, AUTOMATIC TOOL LENGTH MEASURING DEVICE, MANUAL POP UP PINS, 10 HP HSD SPINDLE MODEL 919, VACUUM PUMP

2006 ELUMATEC SBZ-122/30 CNC PROFILE MACHINING CENTER/ROUTER S/N SBZ-122/30, SPECIFICATIONS, STANDARD TABLE AREA 137.7", TABLE CAPACITY, X-AXIS ROUTING CAPACITY FACE SIDE 137.7", TABLE CAPACITY, Y-AXIS 13.75", ROUTING CAPACITY TOP 9", ROUTING CAPACITY FRONT 7", TABLE CAPACITY Z-AXIS 11", ROUTING CAPACITY TOP 11", STEP OVER CAPACITY 7.3", RAPID POSITIONING Y-Z AXES (MAX.) 1,176"/MIN, RAPID POSITIONING X-AXES (MAX.) 1,968"/MIN, MAX. SPINDLE SPEED 21,000 RPM, POWER OUTPUT, ROUTER SPINDLE 8.1 HP,480 VOLT, 3, PHASE, MAX. PROFILE HEIGHT/STE OVER MAX. 11", SOFTWARE FORCED FRONT/REAR MACHINING NO STEP OVER FROM FRONT TO REAR OF PROFILE, HEAD RUNS AROUND ZERO POINT., MAX. DIAMETER OF TOOLING 2.4", MAX. DIAMETER OF DISK CUTTER, MANUAL 7.87", AUTOMATIC 3.62", MAX. AIR PRESSURE 102 PSI, MAX. LENGTH OF TOOLING (TOP) 7.9", MAX. DIA. SHAFT FOR ER-32 COLLET .78", MAX. DIA. SHAFT FOR ER-16 COLLET (ANGLE HEAD CAP COLLET) .511", MAX. DIA. SHAFT FOR 077 COLLET .394", TAPPING CAPACITY UP TO (W/FLOAT COLLET -ER32 COLLET SIZE) 0.375" @ 65% THREAD, TOOL CHUCK HSK F63, TOOL HOLDER FOR AUTO TOOL CHANGE 4, OVERALL MACHINE BASE DIMENSIONS 62" X49.5", LIGHT CURTAIN WIDTH 181.3"L X 88"H, MACHINE WEIGHT (APPROX.) 3,605 LBS, EQUIPPED WITH, PC BASED CONTROL E550 CONTROL, ELUSOFT SOFTWARE, MACHINING 3 SIDES OF PROFILE, LINEAR GUIDE FOR X Y Z TRAVEL, PROFILE IS HELD BY ADJUSTABLE PNEUMATIC CLAMPS, (2) AUTOMATIC TOOL CHANGERS W/4 TOP TOOL HOLDERS & 1 ANGLE HEAD HOLDER EACH, HORIZONTAL PNEUMATIC CLAMPS, PULSE SPRAY MIST COOLANT SYSTEM, TOOL HEIGHT GUAGE, (1) ANGLE HEAD TOOL HOLDER INCLUDED,

2011 HOLZHER DYNESTIC 7516 CNC ROUTER 5'X10' S/N: 27/1-102, SPECIFICATIONS, DISPLACEMENT TRAVEL:, X-AXIS LENGTH 124.66", Y-AXIS WIDTH 61", VERTICAL BORING DIMENSIONS:, X-AXIS MAXIMUM 122.95", Y-AXIS MAXIMUM (ALL DRILLS) 57.32", ROUTER WORKING DIMENSIONS:, X-AXIS MAXIMUM 122.24", Y-AXIS MAXIMUM 61.10", POWER REQUIRED: 220 - 242 VOLTS, 3 PH/FULL LOAD AMPERAGE OF MACHINE IS 50 AMPS., EQUIPPED WITH, 8 POSITION TOOL CHANGER, BORING UNIT, BECKER VACUUM PUMP, NEW SPINDLE NEVER USED IN PRODUCTION,

2021 LAGUNA SMARTSHOP 2 CNC ROUTER S/N: 20090464928, MACHINE SPECIFICATIONS SS2, MOTOR DRIVE+A2:A39 DELTA BRAND VFD-E VARIABLE FREQUENCY DRIVE., SPINDLE 11 HP HSD (ITALIAN) ELECTRO SPINDLE ISO-30 (ATC), CERAMIC SPINDLE BEARINGS., SPINDLE RPM 6,000 - 24,000 RPM, CONTROLLER LAGUN TOUCH SERIES CNC CONTROLLER. MACHINE FEATURES THE NETWORKING, CONNECTIVITY AND ONLINE TROUBLESHOOTING. RUNS INDUSTRY STANDARD "G-CODE". PROGRAM TRANSFER TO THE CONTROLLER CAN BE ACCOMPLISHED WITH USB, ETHERNET., REMOTE VACUUM PUMP, CONTROL AT THE OPERATOR STATION YES, DUST CHUTE DIAMETER 4" INCHES, VOLTS 208-220 VOLTS 1 OR 3 PHASE, AMPS DEPENDENT ON THE VACUUM PUMP SELECTION., X, Y AND Z AXIS TRAVEL, 48" X 96" X 9.5" AXIS TRAVEL (4' X 8' MODEL), GANTRY CLEARANCE 11" INCHES, MACHINE WORK TABLE, 48.0" X 96.0" (4' X 8' MODEL), RAPID TRAVEL/CUTTING SPEED, 720 RAPIDS,550 CUTTING, HEAVY-DUTY WELDED TUBULAR STEEL FRAME, 3,500 LBS. - 4,500 LBS. (DEPENDING ON MODEL), MACHINE FOOT PRINT, 80" X 140" (4' X 8' MODEL), `, MACHINE SPECIFICATIONS SS2, 49.0" X 97.0" X 8.0" (4' X 8' MODEL), VACUUM TABLE WITH T-SLOTS YES, 25 MM HEAVY-DUTY HIWIN HG SERIES LINEAR, BEARINGS AND RAILS ON ALL AXIS. YES, HELICAL RACK-AND-PINION DRIVES ON X AND Y AXES AND PRECISION-GROUND BALL SCREW DRIVE ON Z AXIS., YES, GANTRIS DRIVEN ON EACH END (TWO HELICAL RACK-AND-PINION DRIVES ON Y AXIS)., YES, LIMIT SWITCHES. SOLID STATE, EXPANDABLE CONTROL SYSTEM FOR CUSTOM, APPLICATIONS. YES, SPINDLE SPEED CONTROL THROUGH, PROGRAMMING. YES, MANUAL OVERRIDES OF SPINDLE SPEED AND, FEED SPEEDS DURING RUN. YES, CENTRALIZED LUBRICATION SYSTEM. YES, 10 HP VACUUM PUMPS. YES, VACUUM MONITORING GAUGE. YES, ISO-30 TOOL HOLDERS, COLLETS AND PRECISION, COLLET NUTS. 30 AMP, AUTOMATIC TOOL CHANGER WITH 8-POSITION, TOOL RACK. YES, EQUIPPED WITH, B&R AUTOMATION CONTROL, HSD 951 SPINDLE, 12 HP 24,000 RPM, 8 POSITION TOOL CHANGER, 10 HP VACUUM PUMP, 4TH AXIS LATHE TURNER ATTACHMENT,

2012 BIESSE ROVER A 1332 ATS POD AND RAIL 4-AXIS CNC ROUTER S/N: 35171 SPECIFICATIONS, WORKING FIELD:, X - AXIS: 3280MM (129.1"), Y - AXIS: 1320MM (52"), Z - AXIS: 170MM (7"), (6) ATS PANEL SUPPORT RAILS, BIESSE'S ATS (AUTO LOCATING PODS), PANEL LIFT SUPPORTS FOR LOADING & UNLOADING OF SHEETS, MULTI ZONE WORKING AREAS, FRONT, REAR & SIDE STOPS, 17.7 HP HSD ELECTRO SPINDLE (HSKF63), 12 POSITION ROTARY TOOL CHANGER, BH 17L BORING HEAD W/ QUICK CHANGE SYSTEM, (10) VERT. SPINDLES (7 IN X & 3 IN Y), (3) HORZ. SPINDLES (2 IN X & 1 IN Y), SAW BLADE UNIT 120MM, AUTO LUBRICATION, REMOTE KEYBOARD CONTROLS, PC DRIVEN XP600 CONTROL, WINDOWS XP OPERATING SYSTEM, PC COMPUTER W/19" COLOR MONITOR, CD -ROM READER, 20 GB HARD DISK W/KEYBOARD & MOUSE, BECKER VACUUM PUMP, B-SOLID SOFTWARE INCLUDED., 9070440 WORKING FIELDS, WORKING FIELD: X = 3.280 MM; Y = 1.320 MM; Z = 170 MM WITH H=48 MM MODULES, AXIS STROKE: X = 3722 MM; Y = 1993 MM; Z = 324 MM, WORK TABLE, "ATS" (ADVANCED TABLE SETTING), IS A BIESSE IS THE MOST ADVANCED TABLE DESIGN THAT ALLOW EASY AND FAST TABLE SET-UP WITHOUT LIMITATIONS IN THE POSITIONING, ORIENTATION AND INTERCHANGEABILITY OF THE VACUUM MODULES., THE "ATS" EXCELS IN VERSATILITY AND FLEXIBILITY FEATURING A WIDE RANGE OF STANDARD AND/OR CUSTOM FIXTURING SOLUTIONS, ., IN THE PICTURE SOME OF THE AVAILABLE HOLD-DOWN OPTIONS NOT INCLUDED, 73006076 ATS PANEL SUPPORTS - L = 1280MM - 24 SLIDING BASES, THE WORK AREA IS COMPOSED OF:, 6 ALUMINUM PANEL SUPPORTS. THE SUPPORTS SLIDE ON HARDENED AND GROUND LINEAR GUIDES BY MEANS OF BALL RUNNERS. THE LOCKING TAKES PLACE ON BOTH THE FRONT AND THE BACK LINEAR GUIDE , BY MEANS OF 2 PNEUMATIC CYLINDERS, AND IS CONTROLLED THROUGH A PUSH-BUTTON PLACED IN FRONT OF THE PANEL SUPPORT, 1 METRIC SCALE ALONG THE "X" AXIS, FOR A CORRECT POSITIONING OF THE PANEL SUPPORTS, 6 METRIC SCALES ALONG THE "Y" AXIS, FOR A CORRECT POSITIONING OF THE PANEL LOCKING DEVICES, 24 SLIDING BASES WITH DIMENSIONS 132 X 132 X H 41.5 MM WITH INDEPENDENT PNEUMATIC LOCKING . EACH BASE IS PREARRANGED FOR THE INSTALLATION OF LOCKING MODULES FOR PIECES WITH DIFFERENT SHAPES AND DIMENSIONS , AND ALLOWS TO ROTATE THE VACUUM MODULES BY 15 , IDEAL SOLUTION FOR SHAPED PANELS, 24 SHUTTERS FOR THE CLOSURE OF THE BASES NOT PROVIDED WITH VACUUM MODULES, 7350428 6 REAR REFERENCE STOPS WITH A STROKE OF 115 MM (BACK WORKSTATION), 7350717 6 REAR REFERENCE STOPS WITH A STROKE OF 115 MM AT 1190MM (FRONT), REFERENCE STOPS ARE 22 MM DIAMETER HARDENED STEEL TO GRANT THE MAXIMUM RIGIDITY, AND ON THE INSIDE TOP PART HAVE A TREAD TO ASSEMBLE MUSHROOM CLAMPS (OPTION) OR THE DEVICE TO REFERENCE PANELS WITH OVERHANGING LAMINATION (OPTION). REFERENCE PINS CAN ALSO BE SUPPLIED WITH SENSORS DETECTING THE STOP POSITION (OPTION)., 7350190 4 SIDE STOPS WITH A STROKE OF 115 MM (2 LH + 2 RH), THE STOPS CAN BE POSITIONED MANUALLY ALONG THE Y AXIS., 7350205-7350237 4 BAR SUPPORTS FOR MODULES H = 74 MM., THESE SUPPORTS, WITH AUTOMATIC N.C. CUTTING OUT, FACILITATE THE LOADING AND UNLOADING OF HEAVY AND/OR BIG PANELS., EACH SUPPORT CAN CARRY A WEIGHT OF 36 KG (AT 7 BAR)., PNEUMATIC SYSTEM REQUIRED, 7350806 DIVISION OF THE VACUUM SYSTEM IN 2 WORK AREAS IN X, DIVISION OF THE PNEUMATIC LOCKING SYSTEM IN 2 WORK AREAS IN X, THE MACHINE TOTAL WORK AREA IN X IS DIVIDED IN 2 INDEPENDENT WORK AREAS., THE ACTIVATION OF ONE OR BOTH AREAS IS CONTROLLED BY THE N.C., IN RELATION TO THE MAXIMUM X DIMENSION OF THE ACTIVE PROGRAM., EACH WORK AREA CAN HAVE LH AND RH ORIGINS WHEN REMOVABLE CENTRAL STOPS ARE PRESENT., THIS DIVISION ALLOWS TO HAVE, ON EACH SLIDING BASE, BOTH THE VACUUM SYSTEM, TO BE USED WITH THE VACUUM MODULES, AND THE COMPRESSED AIR SYSTEM, TO BE USED WITH PNEUMATIC LOCKING MODULES SUCH AS UNICLAMP MODULES OR PUSHERS., * THE CODE INCLUDES NR. 2 PEDALS, EACH ACTIVATING ONE WORKING AREA., 7350055 AUXILIARY VACUUM SYSTEM FOR CUSTOM FIXTURES, AUXILIARY VACUUM SYSTEM FOR THE USE OF CUSTOM FIXTURES THROUGH A SPECIFIC MACHINE CYCLE., THE SYSTEM INCLUDES 8 QUICK CONNECTS VACUUM PORTS ON THE MACHINE BASE (4 ON THE LH AREA AND 4 ON THE RH AREA)., 7300971-7300918 (2) 300 M3/H VACUUM PUMP, ROTARY VANES, OIL-FREE 300 M3/H AT 60 HZ (176.5 CFM), WORK UNITS, A= 3280MM (129); B=1525MM (60); F (FULL PENDULUM) = 875MM (34.44), 7212116 13.2 KW (17.7 HP) ELECTROSPINDLE WITH HSK F63 ADAPTOR AND AIR COOLING, THE INNOVATIVE 13.2 KW (17.7 HP) ELECTRO SPINDLE, HSK-F63 ADAPTOR, AIR COOLED ON THE ROVER MACHINES IS MANUFACTURED BY HSD (HIGH SPEED DEVELOPMENT), A BIESSE GROUP COMPANY., BENEFITS FOR THE CUSTOMER OF THE HSD TECHNOLOGY:, INCREASED PRODUCTIVITY WITH:, - PROGRAMMABLE ROTATION SPEEDS FROM 1,000 TO 24,000 RPM, - 13.2 KW (17.7 HP)/12,000 TO 15,000 RPM IN S6 DUTY, - EFFICIENT COOLING SYSTEM., PRECISION AND QUALITY MACHINING.

2023 C.R. ONSRUD 98E18 "EXTREME SERIES" CNC ROUTER, 5 X 8 TABLE. 98 - 5X8 - WORK ENVELOPE ALUMINUM FLAT TABLE - ALUMINUM BASE TABLES - GROUND, CAST, TOOL PLATE. BASE TABLES CAN BE CUSTOMIZED WITH A BOLT PATTERN, MATRIX, T-SLOT, ETC., AND WOULD REQUIRE ADDITIONAL ENGINEERING. CUSTOM TABLES ARE QUOTED PER PROJECT. (THIS OPTION REPLACES STANDARD VACUUM TABLE) 28-INCHES OF Z STROKE - Z-STROKE OF THE RAM IS 28IN. WITH STANDARD 3-AXIS HEAD, CLEARANCE FROM SPINDLE GAUGE LINE TO TABLE IS 31IN. WITH STANDARD 5-AXIS HEAD HEIGHT OF 23IN, CLEARANCE FROM SPINDLE GAUGE LINE TO TABLE IS 28IN. 8X5 - ALUMINUM BASE TABLE - (SEE DESCRIPTION ABOVE) STANDARD 1 INCLUDED CONTROLLER FANUC 0I MACHINE CONTROLLER SYSTEM WITH PANEL-I HMI - INDUSTRIAL CNC MACHINE CONTROLLER WITH FANUC PANEL-I HMI W/HIGH RES TOUCH SCREEN. FANUC 0I IS NOT A PC WITH A CONTROL CARD BUT IS A DEDICATED INDUSTRIAL PLC DESIGNED TO CONTROL CNC MOTION, FOR MAXIMUM RELIABILITY AND PERFORMANCE. INCLUDES: NETWORK CAPABILITY, ADDS LARGE FANUC DIGITAL DRIVES & SERVOS. INCLUDES FULL REMOTE DIAGNOSTIC TROUBLESHOOTING CAPABILITIES. ADDS M-CODE CONTROLLED VACUUM ZONES (IF EQUIPPED WITH PNEUMATIC VACUUM ZONE OPTION). PROVIDED WITH 4-PORT NETWORK HUB (REQUIRES 460V OUT ISOLATION TRANSFORMER). STANDARD 1 INCLUDED HEAD OPTIONS 18 HP SPINDLE - 4-POLE, 13.5KW, 18HP 24,000 RPM FULLY PROGRAMMABLE & REVERSIBLE, VARIABLE SPEED, HSK 63F TOOL INTERFACE, QUICK-CHANGE SPINDLE, CAPABLE OF ROUTING & DRILLING, PROGRAMMABLE FEED RATES W/OVERRIDE CAPABILITY. 2-POSITION INTEGRATED DUST TRANSITION SYSTEM - INTEGRATED DUST EXTRACTION HOOD PULLS CHIPS AWAY FROM THE SPINDLES NOSE & UP A SEPARATE CHAMBER & HOOD TO EFFECTIVELY REMOVE CHIPS FROM THE MACHINING PROCESS. (8IN DUST TRANSITION ALSO PROVIDED FOR CONNECTING TO YOUR DROPPED-IN FLEX HOSE) - PROGRAMMABLE AIR BLAST - BLOWS AIR ON TOOL TIP TO AID CHIP OR DUST EVACUATION. CAN BE CONTROLLED BY M-CODE. ISOLATION TRANSFORMER OPTIONS ISOLATION TRANSFORMER - 6-TAP, NON-COMPENSATING TRANSFORMER HELPS ADJUST YOUR PLANT POWER TO THE EXACT MACHINE LUBRICATION SYSTEMS OPTIONS AUTOMATIC GREASE LUBRICATION SYSTEM - REPLACES MACHINES STANDARD CENTRALIZED GREASE LUBRICATION ON ELECTRICAL CABINET COOLING OPTIONS AIR CONDITIONED ELECTRONICS CABINETS - RECOMMENDED FOR EXTREME ENVIRONMENTS & SOME NON-TEMPERATURE CONTROLLED WORKPLACES. 12 TOOL - DYNAMIC AUTOMATIC ROTARY TOOL CHANGER - FULLY SERVO CONTROLLED INSTEAD OF STEPPER CONTROLLED OR RACK-STYLE TOOL CHANGERS. DESIGN ELIMINATES MISFIRES & QUICKLY CHANGES BETWEEN 12 DIFFERENT TOOLS ABLE TO STORE AGGREGATES. YOU MAY REQUIRE C-AXIS OR SEPARATE AGGREGATE TOOL CHANGER OPTION TO HOLD SOME LARGER OR NON-STANDARD AGGREGATES. ENCLOSURE - MACHINE ENCLOSURE WITH STEEL ROOF, TO ALLOW TABLES TO EXIT THE ENCLOSURE FOR MANUAL OR ROBOTIC LOADING & UNLOADING. (2) ENTRY DOORS WITH INTERLOCK TO ALLOW OPERATOR OR MAINTENANCE TO SERVICE THE MACHINE AS NEEDED. EXTENDED FRAME - E SERIES - EXTENDED FRAME TO ENSURE THE TABLES EXIT THE ENCLOSURE AND NOT OBSTRUCT THE LOADING/ UNLOADING PROCESS. THIS EXTENDS THE MACHINE FRAME APPROXIMATELY 24" AS REFLECTED IN THE FOOTPRINT DRAWING. A 12' WIDE DOOR IS REQUIRED TO BRING THE MACHINE INTO THE LINAMAR FACILITY. ADDITIONAL IO - THIS ADDS AN ADDITIONAL IO MODULE FOR WHEN THE NUMBER OF OPTIONS ON THE MACHINE EXCEEDS THE STANDARD IO MODULE SLOTS AVAILABLE. ENERGY CHAIN PROTECTIVE SLEEVE - THIS FLEXIBLE PROTECTIVE SLEEVE HELPS KEEP DEBRIS OUT OF ENERGY CHAIN BETTER THAN TRADITIONAL CLOSED SECTION ENERGY CHAINS WITHOUT HINDERING PERFORMAN -3- MACHINE MONITORING & INTEGRATIONS OPTIONS ROBOTIC INTEGRATION AND AUTOMATION HARDWARE - (1) SPECIFICS WITH LINAMAR AND CR ONSRUD CONTROLS DEPT. - HARDWARE AND SOFTWARE REQUIREMENTS - COUPLER FOR PN TO PN CONTROL CONNECTION - TO BE SPECIFIED BY "ANYBUS "WHERE POSSIBLE AND RELATED TO ROBOTIC AND COMMUNICATION PROTOCOLS. INCLUDED 1 INCLUDED OSYNC MACHINE ANALYTICS - OSYNC MACHINE MONITORING IS DESIGNED TO PROVIDE DEEP INSIGHTS INTO YOUR MACHINING PROCESS. OSYNC STARTS WITH A REAL TIME MACHINE INFORMATION TO LET YOU KNOW EXACTLY WHAT IS GOING ON WITH EACH OF YOUR MACHINES AT ANY TIME. OSYNC CAN ALSO SHOW SUMMARY INFORMATION ABOUT YOUR PRODUCTIVITY WITH DASHBOARDS, REPORTS, GRAPHS, OEE COMPARISONS, AND MORE BASED ON THE PROGRAM HISTORY. ALONG WITH PROGRAM INFORMATION, OSYNC PROVIDES DEEPER INSIGHTS INTO DIAGNOSTIC INFORMATION TO GET YOUR MACHINE BACK RUNNING QUICKLY. TEXT MESSAGE OR EMAIL ALERTS CAN ALSO BE SETUP FOR CRITICAL INFORMATION. ADDITIONALLY, OSYNC WILL HELP YOU KEEP YOUR MACHINE RUNNING IN TOP SHAPE WITH PREVENTATIVE MAINTENANCE SCHEDULES. OSYNC IS TAKING MAINTENANCE TO THE NEXT LEVEL BY ADDING PREDICTIVE MAINTENANCE ALERTS TO IT LATEST RELEASES. OSYNC IS IN ACTIVE DEVELOPMENT AND CONTINUES TO PUSH THE INDUSTRY 4.0 LIMITS WITH EACH RELEASE. OSYNC IS LICENSED PER MACHINE. CONTROL PREP FOR ROBOT - THIS OPTION ENABLES THE FEATURES ON THE FANUC CONTROL SYSTEM THAT ALLOWS FOR COMMUNICATION WITH A ROBOT. NOTE: THIS DOES NOT INCLUDE ANY TIME FOR PROGRAMMIN

2023 C.R. ONSRUD 122E24W6 EXTREME CNC ROUTER. FEATURES A 6X10 TABLE. 122 - 6X10 - WORK ENVELOPE ALUMINUM FLAT TABLE - ALUMINUM BASE TABLES - GROUND, CAST, TOOL PLATE. BASE TABLES CAN BE CUSTOMIZED WITH A BOLT PATTERN, MATRIX, T-SLOT, ETC., AND WOULD REQUIRE ADDITIONAL ENGINEERING. CUSTOM TABLES ARE QUOTED PER PROJECT. (THIS OPTION REPLACES STANDARD VACUUM TABLE) STANDARD 1 INCLUDED 28-INCHES OF Z STROKE - Z-STROKE OF THE RAM IS 28IN. WITH STANDARD 3-AXIS HEAD, CLEARANCE FROM SPINDLE GAUGE LINE TO TABLE IS 31IN. WITH STANDARD 5-AXIS HEAD HEIGHT OF 23IN, CLEARANCE FROM SPINDLE GAUGE LINE TO TABLE IS 28IN. 10X6 - ALUMINUM BASE TABLE - (SEE DESCRIPTION ABOVE) STANDARD 1 INCLUDED CONTROLLER FANUC 0I MACHINE CONTROLLER SYSTEM WITH PANEL-I HMI - INDUSTRIAL CNC MACHINE CONTROLLER WITH FANUC PANEL-I HMI W/HIGH RES TOUCH SCREEN. FANUC 0I IS NOT A PC WITH A CONTROL CARD BUT IS A DEDICATED INDUSTRIAL PLC DESIGNED TO CONTROL CNC MOTION, FOR MAXIMUM RELIABILITY AND PERFORMANCE. INCLUDES: NETWORK CAPABILITY, ADDS LARGE FANUC DIGITAL DRIVES & SERVOS. INCLUDES FULL REMOTE DIAGNOSTIC TROUBLESHOOTING CAPABILITIES. ADDS M-CODE CONTROLLED VACUUM ZONES (IF EQUIPPED WITH PNEUMATIC VACUUM ZONE OPTION). PROVIDED WITH 4-PORT NETWORK HUB (REQUIRES 460V OUT ISOLATION TRANSFORMER). STANDARD 1 INCLUDED HEAD OPTIONS 3 AXIS - 24HP SPINDLE UPGRADE - 4-POLE, 18KW, 24HP 24,000 RPM LONG NOSE SPINDLE W/ HSK-63F SPINDLE TAPER, FULLY PROGRAMMABLE & REVERSIBLE, VARIABLE SPEED, LIQUID COOLED, QUICK-CHANGE SPINDLE, CAPABLE OF ROUTING & DRILLING, PROGRAMMABLE FEED RATES W/OVERRIDE CAPABILITY. CHILLER FUID COOLED SPINDLE OPTION - ADDS A LIQUID COOLING SYSTEM & CHILLER IN PLACE OF THE STANDARD FAN & COMPRESSED AIR SPINDLE COOLING SYSTEM. (RECOMMENDED WHEN MACHINING MOSTLY NON-FERROUS METALS OR WHEN USING 20HP SPINDLES OR LARGER) AGGREGATE ANTI-ROTATION RETENTION RING - ATTACHES TO SPINDLE UNDERSIDE. GIVES SPINDLE THE ABILITY TO PICK UP AGGREGATES FROM ATC. (INCLUDED IN AUTOMATIC AGGREGATE TOOL CHANGER &/OR C-AXIS ABILITY OPTIONS) PROGRAMMABLE AIR BLAST - BLOWS AIR ON TOOL TIP TO AID CHIP OR DUST EVACUATION. CAN BE CONTROLLED BY M-CODE. C-AXIS ABILITY FOR USE WITH AGGREGATES - ADDS A CONTINUOUS ROTATION, ROTATIONAL C-AXIS TO AGGREGATE TOOL CHANGER & CAPABILITY. PRICE INCLUDES AGGREGATE ANTI-ROTATION SPINDLE ADAPTER RING OPTION. (REQUIRES AN EXTRA DAY OF TRAINING) 1 AVAILABLE ISOLATION TRANSFORMER OPTIONS ISOLATION TRANSFORMER - 6-TAP, NON-COMPENSATING TRANSFORMER HELPS ADJUST YOUR PLANT POWER TO THE EXACT POWER NEEDED BY YOUR CNC. INPUT VOLTAGE NEEDS TO BE SPECIFIED AFTER ORDER. NON-STANDARD VOLTAGES MAY HAVE ADDITIONAL CHARGES. MACHINE LUBRICATION SYSTEMS OPTIONS AUTOMATIC GREASE LUBRICATION SYSTEM - REPLACES MACHINES STANDARD CENTRALIZED GREASE LUBRICATION ON STANDARD MACHINES ELECTRICAL CABINET COOLING OPTIONS AIR CONDITIONED ELECTRONICS CABINETS - RECOMMENDED FOR EXTREME ENVIRONMENTS & SOME NON-TEMPERATURE CONTROLLED WORKPLACES. OPTION REPLACES THE STANDARD HEAT EXCHANGER SYSTEM. STANDARD TOOL CHANGER OPTIONS 12 TOOL - DYNAMIC AUTOMATIC ROTARY TOOL CHANGER - FULLY SERVO CONTROLLED INSTEAD OF STEPPER CONTROLLED OR RACK-STYLE TOOL CHANGERS. DESIGN ELIMINATES MISFIRES & QUICKLY CHANGES BETWEEN 12 DIFFERENT TOOLS ABLE TO STORE AGGREGATES. YOU MAY REQUIRE C-AXIS OR SEPARATE AGGREGATE TOOL CHANGER OPTION TO HOLD SOME LARGER OR NON-STANDARD AGGREGATES. -3- SINGLE POSITION AGGREGATE STATION OPTIONS AUTOMATIC AGGREGATE TOOL CHANGER - STAND ALONE, SINGLE POCKET, ADDITIONAL POSITION TOOL CHANGER TO MAKE MACHINE FULLY AGGREGATE CAPABLE (FOR USE WITH OR WITHOUT C-AXIS ABILITY BELOW) N/A ON MACHINES W/2-12 POS ATCS. THIS OPTION WILL REQUIRE THE ADDITION OF EITHER AGGREGATE ANTI-ROTATION RETENTION RING OR C-AXIS ABILITY TO FULLY USE AGGREGATES. 1 AVAILABLE ENHANCEMENTS OPTIONS RMI-Q RF RECEIVER - FOR THE RF RECEIVER ONLY PORTION OF RENISHAW PROBE SYSTEM. FOR USE WHEN RENISHAW 3D CAD MODEL - FOR SIMULATION - A SIMPLIFIED SIMULATOR VERSION OF 3D CAD MODEL O ENCLOSURE - MACHINE ENCLOSURE WITH STEEL ROOF, TO ALLOW TABLES TO EXIT THE ENCLOSURE FOR MANUAL OR ROBOTIC LOADING & UNLOADING. (2) ENTRY DOORS WITH INTERLOCK TO ALLOW OPERATOR OR MAINTENANCE TO SERVICE THE MACHINE AS NEEDED. EXTENDED FRAME - E SERIES - EXTENDED FRAME TO ENSURE THE TABLES EXIT THE ENCLOSURE AND NOT OBSTRUCT THE LOADING/ UNLOADING PROCESS. THIS EXTENDS THE MACHINE FRAME APPROXIMATELY 24" AS REFLECTED IN THE FOOTPRINT DRAWING. A 12' WIDE DOOR IS REQUIRED TO BRING THE MACHINE INTO THE LINAMAR FACILITY. I OSYNC MACHINE ANALYTICS - OSYNC MACHINE MONITORING IS DESIGNED TO PROVIDE DEEP INSIGHTS INTO YOUR MACHINING PROCESS. OSYNC STARTS WITH A REAL TIME MACHINE INFORMATION TO LET YOU KNOW EXACTLY WHAT IS GOING ON WITH EACH OF YOUR MACHINES AT ANY TIME. OSYNC CAN ALSO SHOW SUMMARY INFORMATION ABOUT YOUR PRODUCTIVITY WITH DASHBOARDS, REPORTS, GRAPHS, OEE COMPARISONS, AND MORE BASED ON THE PROGRAM HISTORY. ALONG WITH PROGRAM INFORMATION, OSYNC PROVIDES DEEPER INSIGHTS INTO DIAGNOSTIC INFORMATION TO GET

MILWAUKEE 49-57-0030 HWAG ARBOR ASSEMBLY 3/4" STRAIGHT SHANK

RHEEM RETE-3 TANKLESS WATER HEATER FEATURES ON-UNIT TEMPERATURE CONTROL LEDS INDICATE ACTIVE ELEMENT AND STANDBY MODE STANDARD 1/2 WATER CONNECTION RUGGED BRASS/COPPER HEAT EXCHANGER MODULATING POWER SPECS DESIGNED FOR LOW FLOW SINGLE BATHROOM SINK APPLICATIONS 120 VOLTS 3KW 1.5 GPM (GALLON PER MINUTE) MAXIMUM FLOW RATE

ANTI SLIP MAT

RED SPLASH CURTAIN

TAMCO LIQUID DISPENSING JUGS

HEAVY DUTY FIRE PROOF CABINET NO CONTENTS

NESLAB EN-150 FLOWTHRU COOLERS PART NO. 401001 ~ 115V, 3 AMPS, 60 HZ

CONTROL CONCEPTS INC XDC-10 FIBER OPTIC ILLUMINATOR WITH TELEVISION MICROSCOPE JC-300 CCD CAMERA

BAUSCH & LOMB MICROSCOPE WITH DINO LITE DIGITAL CAMERA AND LIGHT 0.7X - 3.0X MAGNIFICATION DINO CAPTURE 2.0 SOFTWARE DISK

HUSKY PRO 7HP AIR COMPRESSOR 135 PSI 60 GALLONS 10.3 SCFM @ 90 PSI

VAN KEUREN CO VARIBEAM CMM COORDINATE MEASURING MACHINE 14" SCREEN SPI DIGITAL MIC S/N: 9311

TORIT DRYFLO DMC-A MIST COLLECTOR 3/4 HP MOTOR 208/230/460 ELECTRICS S/N: IG771446

TORNOS BECHLER ECN 164 CNC LATHE MAX BAR DIAMETER : 16 [MM] - HEADSTOCK STROKE : 135 [MM] - SPINDLE ROTATION SPEED : 8000 [RPM] - SPINDLE POWER : 3,7/5,5 [KW] - COUNTER SPINDLE ROTATION SPEED : 6000 [RPM] - COUNTER SPINDLE MAX DIAMETER : 16 [MM] - SIZES : 2140 X 1195 X 1720 [MM] S/N: T58973

TORNOS BECHLER ECN 164 CNC LATHE MAX BAR DIAMETER : 16 [MM] - HEADSTOCK STROKE : 135 [MM] - SPINDLE ROTATION SPEED : 8000 [RPM] - SPINDLE POWER : 3,7/5,5 [KW] - COUNTER SPINDLE ROTATION SPEED : 6000 [RPM] - COUNTER SPINDLE MAX DIAMETER : 16 [MM] - SIZES : 2140 X 1195 X 1720 [MM] FMB "MINI TURBO 4000" BAR FEEDER MAKE FMB MODEL MINI TURBO 4000 SERIAL NUMBER 11-501-285 YEAR 1992 FMB "MINI TURBO 4000" BAR FEEDER CAPACITY 2.25" BAR LENGTH 14.6"

PASS-THROUGH WHEEL LINE PAINT BOOTH - ITEM / MODEL SIZE #1 SPRAY BOOTH IB-14-08-08-00 14'W X 8'T X 12' D #2 FLASH TUNNEL FT-14-08-10-N-PT 14'W X 8'T X 10' D #3 IR CHAMBER IR-14-08-10-PT 14'W X 8'T X 10' D #4 LAUYANS CONVEYOR APPROX. 160 LINEAR FEET #5 ITW-BGK 4450 IR PANEL HEATER 60" X 50" THE IR CHAMBER IS BGK GAS CATALYTIC INFRARED CURING OVEN

3-ZONE NON-PRESSURIZED LARGE EQUIPMENT DRY FILTER SEMI-DOWNDRAFT BOOTH SEE PICTURES FOR SPECIFICATIONS

3-ZONE OPEN FACE NON-PRESSURIZED INDUSTRIAL DRY FILTER CROSSFLOW PAINT SPRAY BOOTHS - 3-ZONE, OPEN FACE NON-PRESSURIZED INDUSTRIAL DRY FILTER CROSSFLOW PAINT SPRAY BOOTHS SEE PICTURES FOR SPECIFICATIONS