Mazak Haas CNC Machinery Full Machine Shop Assets

2019 HAAS VF-5/40 CNC VERTICAL MACHINING CENTER (VMC) WIRED FOR 4TH AXIS, THRU-SPINDLE COOLANT AND RENISHAW PROBING. TRAVELS X AXIS: 50.0 INCH (1270 MM) Y AXIS: 26.0 INCH (660 MM) Z AXIS: 25.0 INCH (635 MM) SPINDLE NOSE TO TABLE (~ MIN): 4.2 INCH (107 MM) SPINDLE NOSE TO TABLE (~ MAX): 29.2 INCH (742 MM) SPINDLE MAX RATING: 30.0 HP (22.4 KW) MAX SPEED: 8,100 RPM MAX TORQUE: 90.0 FT-LB @ 2000 RPM (122.0 NM @ 2000 RPM) DRIVE SYSTEM: INLINE DIRECT-DRIVE TAPER: CT 40 TABLE LENGTH: 54.0 INCH (1372 MM) WIDTH: 24.0 INCH (610 MM) T-SLOT WIDTH: 0.625 INCH (16 MM) T-SLOT CENTER DISTANCE: 3.15 INCH (80.0 MM) NUMBER OF STANDARD T-SLOTS: 7 MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED): 4,000 LB (1814 KG) FEEDRATES MAX RAPIDS (X, Y, Z): 710 IPM (18.0 M/MIN) MAX CUTTING: 500 IPM (12.7 M/MIN) TOOL CHANGER TYPE: SMTC CAPACITY: 30+1 MAX TOOL DIAMETER (FULL): 3.5 INCH (89 MM) MAX TOOL WEIGHT: 12 LB (5.4 KG) TOOL-TO-TOOL (AVG): 4.2 SEC CHIP-TO-CHIP (AVG): 4.5 SEC GENERAL AIR REQUIRED: 4 SCFM @ 100 PSI (113 L/MIN @ 6.9 BAR) COOLANT CAPACITY: 95 GAL (360 L) ELECTRICAL REQUIREMENTS: 440V, 3-PHASE, 35A (FULL LOAD) MACHINE WEIGHT: ~12,700 LB (5761 KG) S/N: 1163765

2021 HAAS VF-4SS SUPER-SPEED CNC VERTICAL MACHINING CENTER WIRED FOR 4TH AXIS, THRU-SPINDLE COOLANT AND RENISHAW PROBING. TRAVELS X AXIS: 50.0" Y AXIS: 20.0" Z AXIS: 25.0" SPINDLE NOSE TO TABLE (~ MIN): 4.0" (~ MAX): 29.0" SPINDLE MAX RATING: 30.0 HP MAX SPEED: 12,000 RPM MAX TORQUE: 90.0 FT-LB @ 2000 RPM DRIVE SYSTEM: INLINE DIRECT-DRIVE TAPER: CT 40 TABLE LENGTH: 52.0" WIDTH: 18.0" T-SLOT WIDTH: 0.625" T-SLOT CENTER DISTANCE: 3.15" MAX WEIGHT ON TABLE (EVENLY DISTRIBUTED): 1750 LB MAX RAPIDS: 1400 IPM MAX CUTTING: 833 IPM TOOL CHANGER TYPE: SMTC CAPACITY: 30+1 MAX TOOL DIAMETER (FULL): 2.5" (ADJACENT EMPTY): 5.0" MAX TOOL LENGTH (FROM GAUGE LINE): 11" MAX TOOL WEIGHT: 12 LB TOOL-TO-TOOL (AVG): 1.8 SEC CHIP-TO-CHIP (AVG): 2.4 SEC AIR REQUIRED: 4 SCFM @ 100 PSI COOLANT CAPACITY: 55 GAL ELECTRICAL REQUIREMENTS: 220V, 3-PHASE, 70A MACHINE WEIGHT: ~13,500 LB S/N: 1179195

2019 HWACHEON CUTEX-180BL YSMC HORIZONTAL TURNING CENTER (HTC) / SLANT-BED CNC LATHE WITH 2021 LNS ALPHA SL65-S BAR FEEDER (C-AXIS, Y-AXIS), SUB-SPINDLE, AND A FANUC CONTROL. SPECIFICATIONS: CAPACITY SWING OVER BED: 545 MM, Y: 700 MM. MAX. TURNING DIA.: 300 MM. STD. TURNING DIA.: 208 MM. MAX. TURNING LENGTH: 452 MM. SPINDLE CHUCK SIZE: 8 INCH. SPINDLE NOSE: A2-6 ASA. MAX. SPINDLE SPEED: 4,500 (SUB: 6,000) RPM. HOLE THROUGH SPINDLE: 76 (SUB: 43) MM. BAR SIZE: 51 (SUB: 32) MM. SPINDLE MOTOR: 15/11 (20/15) [SUB: 5.5/3.7 (7.5/5)] KW (HP). SPINDLE BEARING SIZE: 90 (SUB: 75) MM. TURRET: 12 TOOLS (24 POSITIONS INDEX). TOOL SIZE: O.D.: 25 MM, I.D.: 40 MM. FEED RAPID (X/Z/Y/B): 36/36/10/36 M/MIN. BALL SCREW LEAD (X/Z/Y/B): 12/12/12/12 MM. TRAVERSE (X/Z/Y/B): 200/580/55/530 MM. SERVO MOTOR (X/Z/Y/B): 3.0/1.8/3.0/1.8 KW. TAILSTOCK / SUB-SPINDLE CYLINDER ROD DIA.: 40 MM. COOLANT TANK CAPACITY: 75 (L: 90) L. PUMP CAPACITY: 0.4 (0.5MPA 2.5) KW. ETC POWER SUPPLY: 40 KVA. FLOOR SPACE (LXW): 2,500 X 1,850 (Y: 1,700) MM. MACHINE HEIGHT: YSMC: 1,995 MM. MACHINE WEIGHT: 4,450 KG. CONTROLLER: FANUC 0I-TF. CONTROLLED AXIS: 3-AXIS. SIMULTANEOUS CONTROLLABLE AXIS: 3-AXIS. INPUT OPERATION: DECIMAL POINT INPUT: AVAILABLE. INCH/METRIC CONVERSION: G20, G21. INTERPOLATION: POSITIONING: G00. LINEAR INTERPOLATION: G01. CIRCULAR INTERPOLATION: G02, G03. DWELL (PER SEC): G04. FEED FUNCTION: FEED PER MIN / FEED PER REV: G98 / G99. MINIMUM INCREMENT OF MPG: 0.001 / 0.01 / 0.1 MM (0.0001" / 0.001" / 0.01"). RAPID TRAVERSE OVERRIDE: F0, F25, F50, F100. FEEDERATE OVERRIDE: 0-150%. JOG OVERRIDE: 0-1260 MM/MIN. PROGRAM STORAGE/EDIT: PART PROGRAM STORAGE LENGTH: 1,280M (512K). NUMBER OF PROGRAM REGISTRATION: 400EA. PROGRAM EDITING: DELETE, INSERT, CHANGE. PROGRAM NO. SEARCH: O4-DIGIT. SEQUENCE NO. SEARCH: N5-DIGIT. CONVERSATION TYPE AUTOMATIC PROGRAM: MANUAL GUIDE I. COORDINATE SYSTEM: ZERO POINT RETURN CHECK: G27. AUTOMATIC ZERO RETURN: G28. COORDINATE SYSTEM SETTING: G50. TOOL OFFSET MEMORY: 128 PAIRS. TOOL GEOMETRIC & WEAR OFFSET: AVAILABLE. TOOL EDGE RADIUS COMPENSATION: AVAILABLE. WORK COORDINATE SYSTEM SETTING: G54-G59. DATA INPUT/OUTPUT: INPUT/OUTPUT INTERFACE: RS232C. ETHERNET INTERFACE: EMBEDDED ETHERNET. S/T/M FUNCTION: SPINDLE FUNCTION: COMMAND IS S FOLLOWED BY 4 DIGITS. CONSTANT SURFACE SPEED: G96, G97. TOOL FUNCTION: COMMAND IS T FOLLOWED BY 4 DIGITS. MISCELLANEOUS FUNCTION: COMMAND IS M FOLLOWED BY 3 DIGITS. PROGRAM SUPPORT FUNCTION: SINGLE CANNED CYCLE: G90, G92, G94. MULTIPLE REPETITIVE CYCLE: G70~G76. MULTIPLE REPETITIVE CYCLE II: AVAILABLE. CUSTOM MACRO B: AVAILABLE. PROGRAM DATA INPUT: G10. DIRECT DRAWING DIMENSION PROGRAMMING: AVAILABLE. CHAMFERING/CORNER "R": AVAILABLE. RUN HOUR DISPLAY: AVAILABLE. THREADING RETRACT: STOP AFTER RETURN FIRST PROGRAM LINE WHEN MACHINE WAS STOP BY RESET. RIGID TAPPING: FOR TURN MILL. SPINDLE DISPLAY: LCD SCREEN: 10.4" COLOR LCD. GRAPHIC DISPLAY: AVAILABLE. DISPLAY LANGUAGE: KOREAN/ENGLISH/GERMAN/FRENCH/ITALIAN/SPANISH/PORTUGUESE/HUNGARIAN/CHINESE/SWEDISH/RUSSIAN. SAFETY/MAINTENANCE: SELF-DIAGNOSTIC FUNCTION: AVAILABLE. STORE STROKE LIMIT: STORED. O.T. MAIN SPINDLE ORIENTATION: AVAILABLE. BACKGROUND EDITING: AVAILABLE. ALARM HISTORY DISPLAY: AVAILABLE. CLOCK FUNCTION: AVAILABLE. HELP FUNCTION: AVAILABLE. 2021 LNS ALPHA SL65-S BAR FEEDER SPECIFICATIONS: CAPACITY DIAMETER RANGE: 6 - 67 MM (1/4 - 2 5/8). OVERALL BARSTOCK LENGTH: 300 - 1550 MM (12 - 61). MAX. BAR LENGTH: LIMITED TO SPINDLE LENGTH. MAGAZINE LOADING CAPACITY: 660 MM (26). APPLICATIONS: TYPE OF HEADSTOCK: FIXED. LOADING SIDE: REAR. X-AXIS RETRACTION: 300 MM (12). Z-AXIS RETRACTION (OPTIONAL): 600 MM (24). CHANGEOVER TIMES: PARTIAL CHANGEOVER: 5 MINUTES (MANUAL). COMPLETE CHANGEOVER: 8 MINUTES OR LESS. PUSHER CHANGEOVER: LESS THAN 1 MIN. DRIVING SYSTEM: MOTOR TYPE: SERVO. DRIVE MECHANISM: NOTCHED BELT. POSITIONING: HIGH-SPEED SERVO CONTROL TO TURRET STOP OR PROGRAMMED POSITION. TECHNICAL DATA: MAIN VOLTAGE: 200V. CONTROL VOLTAGE: 24VDC. PHASE: 1. FREQUENCY: 50/60 HZ. FULL LOAD AMPS (FLA): 1. SHIPPING WEIGHT: APPROXIMATELY 1,020 LBS (463 KG). DIMENSIONS FLOOR SPACE (FOOTPRINT): 77.5 X 42. SPINDLE HEIGHT: ADJUSTABLE FROM 35 - 51. S/N: M042374J5FB

2015 HAAS ST-35 BIG-BORE 2-AXIS CNC LATHE CHUCK SIZE: 12.0 IN MAX CUTTING DIAMETER: 21.0 IN MAX CUTTING LENGTH: 26.0 IN STANDARD BAR CAPACITY: 4.0 IN SPINDLE NOSE: A2-8 SPINDLE BORE: 4.62 IN SPINDLE MAX SPEED: 3,200 RPM MAX MOTOR RATING: 40 HP MAX TORQUE: 425 FT-LB@325 RPM DRIVE SYSTEM: BELT DRIVE SWING DIAMETER OVER FRONT APRON: 31.75 IN OVER CROSS SLIDE: 20.75 IN OVER TAILSTOCK: 23.0 IN TRAVELS & FEEDRATES X-AXIS TRAVEL: 12.5 IN Z-AXIS TRAVEL: 26.0 IN X-AXIS MAX THRUST: 4,100 LB Z-AXIS MAX THRUST: 5,100 LB X-AXIS RAPIDS: 945 IPM Z-AXIS RAPIDS: 945 IPM OPERATING DIMENSIONS MAX OPERATING HEIGHT (A): 83 IN MAX OPERATING WIDTH (B): 178 IN MAX OPERATING DEPTH (C): 120 IN POWER (3-PHASE): 354 - 488 V S/N: 3104487

2019 COSEN G320 SMART NC-100 12.8" AUTOMATIC HORIZONTAL DUAL COLUMN BAND SAW W/ 10' ROLLER CONVEYOR. SPECIFICATIONS ELECTRICAL & POWER ELECTRIC SUPPLY: 3-PHASE, 230V, 60HZ FULL LOAD CURRENT: 11.7 A RATED POWER: 3.7 KW (5 HP) SHORT-CIRCUIT CURRENT: 10 KA HYDRAULIC MOTOR: 0.75 KW (1 HP) COOLANT MOTOR: 0.09 KW (1/8 HP) CUTTING CAPACITY MAX ROUND CAPACITY: 325 MM (12.8") MAX SQUARE CAPACITY: 325 MM (12.8") MAX RECTANGULAR CAPACITY: 325 X 380 MM (12.8" X 15") BUNDLE CUTTING (WIDTH): 190 - 300 MM (7.4" - 11.8") BUNDLE CUTTING (HEIGHT): 70 - 140 MM (2.7" - 5.5") BLADE & OPERATIONAL SPECS BLADE SIZE (LXWXT): 4240 X 34 X 1.1 MM (167" X 1.25" X 0.042") BLADE SPEED: 15 - 100 M/MIN (50 - 328 FPM), INFINITELY VARIABLE BLADE TENSION: HYDRAULIC WITH AUTOMATIC BREAKAGE DETECTION FEEDING STROKE (SINGLE): 403 MM (15.8") WORKBED HEIGHT: 800 MM (31.4") PHYSICAL DIMENSIONS & FLUIDS MACHINE WEIGHT: 2,000 KG (APPROX. 4,409 LBS) FLOORSPACE (LXWXH): 2,165 X 2,391 X 2,120 MM (85" X 94" X 83") COOLANT TANK CAPACITY: 75 L (19.8 GAL) HYDRAULIC TANK CAPACITY: 35 L (9.2 GAL) S/N: 108CM00712

2010 MAZAK QUICK TURN SMART (QTS) 250 2-AXIS CNC TURNING CENTER / LATHE. CAPACITY MAX SWING OVER BED: 26.0" (660 MM) MAXIMUM TURNING DIAMETER: 13.78" (350 MM) MAXIMUM TURNING LENGTH: 20.1" (510 MM) MAXIMUM BAR CAPACITY: 3.0" (76 MM) SPINDLE STANDARD CHUCK SIZE: 10" HYDRAULIC CHUCK SPINDLE NOSE: A2-8 SPINDLE SPEED: 4,000 RPM HOLE THROUGH SPINDLE: 3.2" (81 MM) MAIN SPINDLE MOTOR: 35 HP (26 KW) TURRET NUMBER OF TOOLS: 12 STATIONS TOOL SHANK SIZE (OD): 1.0" (25 MM) BORING BAR DIAMETER (ID): 1.5" (40 MM) TURRET INDEXING TIME (1-STEP): 0.15 - 0.2 SECONDS FEED X-AXIS TRAVEL: 8.75" (222 MM) Z-AXIS TRAVEL: 20.25" (514 MM) RAPID TRAVERSE RATE (X/Z): 1,181 IPM (30 M/MIN) SUB-SPINDLE / TAILSTOCK TAILSTOCK TYPE: NC PROGRAMMABLE / HYDRAULIC TAILSTOCK TAPER: MT-4 TAILSTOCK QUILL DIAMETER: 3.7" (94 MM) TAILSTOCK QUILL TRAVEL: 3.7" (94 MM) COOLANT & ETC MACHINE WEIGHT: ~11,000 LBS (4,990 KG) POWER REQUIREMENT: 55 KVA VOLTAGE: 220V / 3-PHASE / 60 HZ FLOOR SPACE (APPROX): 120" X 87" X 90" (L X W X H) CONTROLLER SPECS MAZATROL SMART CONTROL: 10.4" LCD WITH CONVERSATIONAL AND EIA/ISO PROGRAMMING CAPABILITY. THERMAL SHIELD: INTELLIGENT HEAT DISPLACEMENT COMPENSATION SYSTEM FOR HIGH-ACCURACY STABILITY. MAINTENANCE SUPPORT: BUILT-IN INTELLIGENT MAINTENANCE DIAGNOSTICS AND SIMPLIFIED OPERATION MODES. ACCESSORY SPECS AUTOMATIC TOOL EYE: FOR AUTOMATED TOOL PRESETTING, BREAKAGE DETECTION, AND WEAR COMPENSATION. CHIP CONVEYOR: SIDE-HINGE TYPE FOR EFFICIENT MATERIAL REMOVAL. STANDARD ACCESSORIES: HIGH-PRESSURE COOLANT SYSTEM, FOOT-OPERATED CHUCK/TAILSTOCK CONTROLS, AND WORK LIGHT S/N: 288122

2010 MAZAK VCN 510C-II CNC VERTICAL MACHINING CENTER (VMC) WIRED FOR 4TH AXIS CAPABILITY AND RENISHAW PROBING. SPECIFICATION TABLE SIZE: 51.18"X 21.65" TABLE LOAD CAPACITY: 2,646 LBS X-AXIS TRAVEL: 41.3" Y-AXIS TRAVEL: 20" Z-AXIS TRAVEL: 20" SPINDLE TAPER: CAT 40 SPINDLE SPEED: 12,000 RPM SPINDLE MOTOR 10/30/CONT. MIN: 25/20/10 HP DIST. FROM TABLE TOP TO SPINDLE NOSE: 5.9" TO 25.98" TOOL MAGAZINE CAPACITY: 30 POSITION ATC MAX. TOOL DIAMETER/LENGTH/WEIGHT: 4.92"/13.8"/17 LBS. TOOL CHANGE TIME: 1.3 SEC RAPID TRAVERSE RATES: 1,417 IPM MACHINE DIMENSIONS L X W X H: 113" X 111" X 113" MACHINE WEIGHT: 15,180 LBS S/N: 219497

2012 JOHNFORD SL-650A HEAVY-DUTY, 2-AXIS CNC SLANT-BED TURNING CENTER CAPACITY SWING OVER BED: 880 MM SWING OVER CROSS SLIDE: 450 MM CHUCK SIZE: 12 INCH BAR CAPACITY: 91 / 102 (OPT.) MM SPINDLE NOSE: A2-11 SPINDLE BORE: 115 MM SPINDLE SPEED STEP: AUTO HI-LO SPINDLE SPEED RANGE: 2800 RPM SPINDLE MOTOR: 22/26 KW SPINDLE BEARING DIAMETER: 160 MM TURRET NO. OF TOOLS: 12 CROSS TRAVEL (X-AXIS): 250 MM CROSS TRAVEL (Y-AXIS): 40 MM LONGITUDINAL TRAVEL (Z-AXIS): 1500 MM RAPID TRAVERSE (X/Y/Z): 15/10/18 M/MIN TAILSTOCK TRAVEL: 1300 MM TAILSTOCK QUILL TRAVEL: 100 MM TAILSTOCK QUILL DIAMETER: 85 MM TAILSTOCK SPINDLE TAPER: MT#5 POWER SERVO MOTOR (X-AXIS): 3 / 4 (FOR Y-AXIS) KW SERVO MOTOR (Z-AXIS): 4 KW SERVO MOTOR (Y-AXIS): 1.6 KW WEIGHT: 7500 KG MACHINE DIMENSION (W X H): 2250 X 2160 MM MACHINE DIMENSION (L): 5275 MM S/N: TEQ12040

1986 BLOHM HANSEAT 75 HORIZONTAL SURFACE GRINDING MACHINE W/ MAGNETOOL CC110-300VP ELECTROMAGNET CONTROL. CAPACITY MAX. GRINDING LENGTH: 700 MM TO 800 MM MAX. GRINDING WIDTH: 550 MM MAX. TABLE LOAD: 500 KG TO 780 KG TABLE SIZE: 1320 MM X 500 MM INSTALLATION HEIGHT: 500 MM TO 700 MM. HORIZONTAL SURFACE GRINDER TABLE SPEED: VARIABLE 2 - 30 M/MIN TRANSVERSE TRAVEL: 475 MM (AUTOMATIC) / 500 MM (MANUAL) AUTOMATIC INFEED: EQUIPPED WITH "FINIMATIC" AUTOMATIC VERTICAL DOWNFEED SYSTEM. GUIDEWAYS: PRECISION-GROUND AND HAND-SCRAPED WAYS. MACHINE WEIGHT: APPROX. 4,000 KG MACHINE FOOTPRINT: APPROX. 2,000 MM X 2,000 MM S/N: 12986

2012 HAAS HRT210 ROTARY TABLE PLATTER DIAMETER: 8.27 INCH (210 MM) MAX SPEED: 100 / SEC MAX TORQUE: 210 FT-LB (285 NM) CENTER HEIGHT: 6.000 INCH BRAKE TORQUE: 200 FT-LB @ 100 PSI MAX WEIGHT ON PLATTER: 85 LB (UNSUPPORTED) / 170 LB (WITH SUPPORT) T-SLOTS: 6 STANDARD SLOTS @ 60 POSITIONING ACCURACY: 15 ARC-SEC S/N: 237388

NISSAN MCP1F2A25LV 4,400 LBS CAPACITY LP POWERED FORKLIFT WITH SIDE SHIFT TRUCK WEIGHT: 3,885 KG (8,570 LBS) ATTACHMENT: SIDE SHIFT MAX LIFT HEIGHT: 4,750 MM (187 INCHES) MAST TYPE: 3-STAGE (TRIPLE) MAST CAPACITY (VERTICAL MAST): 4,400 LBS (2,000 KG) AT A 24 INCH (500MM) LOAD CENTER 4,030 LBS (1,830 KG) AT A 24 INCH (600MM) LOAD CENTER 3,700 LBS (1,685 KG) AT A 31 INCH (800MM) LOAD CENTER S/N: GP1F2-9P5135

HAAS HRC160 ROLLER CAM ROTARY TABLE PLATTER DIAMETER: 6.3" (160 MM) MAX SPEED: 830/SEC MAX TORQUE: 108 FT-LB MOTOR TYPE: SIGMA 5 AC BRUSHLESS MOTOR REQUIRES A HAAS MILL WITH A 4TH-AXIS DRIVE AND SOFTWARE VERSION 18.13 OR LATER. S/N: 239315

2018 GARDNER DENVER L18 ROTARY SCREW AIR COMPRESSOR "AIR STATION" WITH GD PILOT CONTROLLER. CAPACITY INSTALLED MOTOR CAPACITY: 25 HP (18.5 KW) AIR DELIVERY (FAD) @ 125 PSIG: 103.8 CFM MAXIMUM DISCHARGE PRESSURE: 125 PSIG DUTY CYCLE: 100% CONTINUOUS. AIREND MODEL: HIGH-EFFICIENCY SLOW-SPEED AIREND DRIVE TYPE: BELT-DRIVEN WITH AUTOMATIC TENSIONING SYSTEM LUBRICANT CAPACITY: ~2.1 GALLONS (8 LITERS) LUBRICANT TYPE: AEON 4000. COOLING METHOD: HIGH-PERFORMANCE AIR-COOLED AFTERCOOLER ELECTRICAL REQUIREMENTS: 460V / 3-PHASE / 60 HZ FULL LOAD AMPS: ~36A (AT 460V) MACHINE WEIGHT: ~970 LBS (440 KG) DIMENSIONS (APPROX): 31" L X 28" W X 47" H. CONTROLLER SPECS GD PILOT MICROPROCESSOR CONTROLLER: FEATURES DISCHARGE/LINE PRESSURE DISPLAY, OIL TEMPERATURE DISPLAY, AND ENHANCED FAULT LOG MONITORING. CONTROL MODE: FIXED SPEED WITH LOAD/NO-LOAD CONTROL AND TIMED SHUTDOWN. SAFETY FEATURES: EMERGENCY STOP, HIGH DISCHARGE TEMPERATURE SENSOR, AND MOTOR OVERLOAD PROTECTION. S/N: D186524

VICTOR 1640B PRECISION ENGINE LATHE MAIN MOTOR: 7.5 HP (TWO-SPEED SPINDLE DRIVE) VOLTAGE: 220V / 3 PHASE / 60 CYCLE CONTROL VOLTAGE: 110V PUMP MOTOR: 1/8 HP (SELF-CONTAINED COOLANT SYSTEM) SWING OVER BED: 16-1/8" DISTANCE BETWEEN CENTERS: 40" SPINDLE SPEEDS: 33 - 2,000 RPM (16 STEPS) SPINDLE BORE: 2-1/32" WITH D1-6 CAMLOCK NOSE S/N: 69123179

VICTOR JF-5VS PRECISION VERTICAL KNEE MILL MOTOR: 5 HP (3 PHASE) VOLTAGE: 220V / 60 HZ / 3 PHASE TABLE SIZE: 10" X 54" SPINDLE TAPER: #40 NMTB SPINDLE SPEEDS: 60 - 3,600 RPM (VARIABLE SPEED) QUILL DIAMETER: 3-15/16" QUILL TRAVEL: 5" LONGITUDINAL TRAVEL (X-AXIS): 36" CROSS TRAVEL (Y-AXIS): 16" VERTICAL TRAVEL (KNEE): 16" RAM TRAVEL: 22.5" APPROXIMATE WEIGHT: 3,850 LBS S/N: 971012

CANTILEVER RACK WITH LARGE AMOUNT OF ASSORTED BAR STOCK

1805 MANUAL COORDINATE MEASURING MACHINE (CMM) WITH RENISHAW PROBING WITH DUAL MONITOR OPERATING PC

1989 TCM FCG20N5 4,000 LB CAPACITY LP/GAS CUSHION TIRE FORKLIFT. SPECIFICATIONS: LOAD CAPACITY: 4,000 LBS (2,000 KG). LOAD CENTER: 24 INCHES. MAX. FORK HEIGHT: ~130 INCHES (STANDARD 2-STAGE/3-STAGE MAST OPTIONS). TILT ANGLE (FORWARD/BACKWARD): 6 / 12 DEGREES. ENGINE MANUFACTURER: NISSAN. ENGINE MODEL: NISSAN H20 / K21. POWER OUTPUT: ~54.4 HP. FUEL TYPE: DUAL FUEL (LIQUID PROPANE GAS / GASOLINE). DISPLACEMENT: 126 - 152 CU IN. TIRE TYPE: CUSHION (SOLID RUBBER). MACHINE WEIGHT: ~7,420 - 7,875 LBS. OVERALL WIDTH: 3.46 FT (41.5 INCHES). TURNING RADIUS: ~78.4 INCHES. OVERHEAD GUARD HEIGHT: ~81.7 INCHES. TRANSMISSION TYPE: AUTOMATIC POWER SHIFT. TRAVEL SPEED (LOADED): ~10 MPH. LIFT SPEED (LOADED): ~118 - 120 FT/MIN. S/N: 3160222

STEEL SHELVING UNIT FILLED WITH ASSORTED DRILLS, MILLS, AND BORES

2000 KITAGAWA MR250 10-INCH HIGH-PERFORMANCE NC ROTARY TABLE. TABLE DIAMETER: 250 MM (APPROX. 10 INCHES). CLAMPING TORQUE: 600 NM (APPROX. 442 FT-LBS) USING PNEUMATIC PRESSURE. INDEXING ACCURACY: 20 ARC-SECONDS. REPEATABILITY: 4 ARC-SECONDS. TOTAL WEIGHT: APPROX. 110 KG (242 LBS) WITHOUT THE CHUCK.

10 INCH HIGH-PERFORMANCE NC ROTARY TABLE. TABLE DIAMETER: 250 MM (APPROX. 10 INCHES). CLAMPING TORQUE: 600 NM (APPROX. 442 FT-LBS) USING PNEUMATIC PRESSURE. INDEXING ACCURACY: 20 ARC-SECONDS. REPEATABILITY: 4 ARC-SECONDS. TOTAL WEIGHT: APPROXIMATELY 110 KG (242 LBS) WITHOUT THE CHUCK.

2008 DAREX XT3000 PRECISION INDUSTRIAL DRILL SHARPENER WITH STAND. ATTACHMENTS INCLUDED. CAPACITY STANDARD DRILL DIAMETER: 3MM TO 21MM (1/8" TO 13/16"). EXPANDED DIAMETER: UP TO 30MM (1-3/16") WITH OPTIONAL LARGE DRILL ATTACHMENT. POINT ANGLES SHARPENED: 118 TO 150 (STANDARD) WITH 90 OPTIONS AVAILABLE. DRILL TYPES: 2-FLUTED HSS, COBALT, OR CARBIDE TWIST DRILLS. OPERATION & MECHANICAL DUTY RATING: CONTINUOUS DUTY (RATED FOR HUNDREDS OF DRILLS PER DAY). POINT STYLES: STANDARD CONIC AND SPLIT POINT (SELF-CENTERING). SHARPENING WHEELS: BORAZON (CBN) FOR HSS/COBALT OR DIAMOND FOR CARBIDE. AUTOMATION: MANUAL OPERATION. ACCURACY: MEETS ANSI, NAS, AND ISO LIP HEIGHT ACCURACY STANDARDS. PHYSICAL SPECS MACHINE WEIGHT: 68 LBS (31 KG). MACHINE SIZE: 20" X 20" X 16". CONSTRUCTION: PROFESSIONAL-GRADE STEEL AND ALUMINUM HOUSING. GRIT REMOVAL: INTEGRATED PORT FOR OPTIONAL VACUUM SYSTEM. ELECTRICAL SPECS INPUT VOLTAGE: 115 VAC. FREQUENCY: 50/60 HZ. RATED CURRENT: 10.0 A (TOTAL) / 2.5 A (GRIND ONLY). WHEEL SPEED: 75/95 FT/SEC (23/29 M/SEC). ROTATIONAL FREQUENCY: 2850/3450 /MIN (RPM). S/N: 6697AR

TOOL CART FILLED WITH ASSORTED CAT 40 TOOL HOLDERS AND TOOLING

BISON 16" (400 MM) 6-JAW SET-TRU MANUAL LATHE CHUCK WITH BACK PLATE. CHUCK SIZE: 16" (400 MM). NUMBER OF JAWS: 6. MAXIMUM SPEED: 1,400 RPM. ACCURACY: TOTAL INDICATOR RUNOUT (T.I.R.) OF .0004" OR BETTER WHEN DIALED IN. THRU-HOLE DIAMETER: ~5.35" (136 MM). BODY MATERIAL: FORGED STEEL. MOUNTING TYPE: PLAIN BACK. FINE ADJUSTMENT: 16" MODELS TYPICALLY USE 8 MICRO-ADJUSTMENT SCREWS. JAWS: TWO-PIECE REVERSIBLE HARD JAWS (HARDENED AND GROUND). WEIGHT: APPROXIMATELY 250 LBS (113 KG).

WEN MAGNETICS ELECTRO-PERMANENT WORKHOLDING EQUIP SQUARE & RADIAL POLE MAGNETIC CHUCKS, & CONTROLS. INCLUDES WEN MAGNETICS ELECTRO-PERMANENT RADIAL POLE CHUCK, WEN MAGNETICS NEOGRID SQUARE POLE ELECTRO-PERMANENT MAGNETIC CHUCK, WEN MAGNETICS EC200R HANDHELD REMOTE PENDANT, AND WEN MAGNETICS ELECTRONIC CONTROL UNIT (EC SERIES).

HAAS HRT210 4TH-AXIS ROTARY TABLE WITH HAAS BRUSHLESS ROTARY CONTROL. PLATTER DIAMETER: 8.27 INCH (210 MM) MAX SPEED: 100 / SEC MAX TORQUE: 210 FT-LB (285 NM) CENTER HEIGHT: 6.000 INCH POSITIONING ACCURACY: 15 ARC-SEC S/N: 250044

HAAS 4TH AXIS ROTARY TABLE WITH HAAS SERVO CONTROL S/N: 211825

WEN MAGNETICS ELECTRO-PERMANENT WORKHOLDING EQUIP SQUARE & RADIAL POLE MAGNETIC CHUCKS, & CONTROLS, SELF-SHIMMING POLE EXTENSIONS, NEOGRID MAGNETIC CHUCK, SM EC21 CONTROL UNIT, NEOGRID SQUARE POLE CHUCK

HAAS 4TH AXIS ROTARY TABLE WITH HAAS SERVO CONTROL S/N: 215728

1997 MAZAK DUAL TURN 20 HIGH-PRODUCTION CNC TURNING CENTER / LATHE WITH TWIN SPINDLES AND TWIN TURRETS. SPECIFICATIONS: CAPACITY MAXIMUM SWING: 12.6 INCH (320 MM) STANDARD CUTTING DIAMETER: 10.0 INCH (254 MM) MAXIMUM CUTTING LENGTH: 5.91 INCH (150 MM) DISTANCE BETWEEN SPINDLE FACES: 49.21 INCH (1250 MM) SPINDLE (LEFT & RIGHT) STANDARD CHUCK SIZE: 8 INCH SPINDLE NOSE: A2-6 SPINDLE SPEED: 35 - 5,000 RPM HOLE THROUGH SPINDLE: 2.4 INCH (61 MM) BAR CAPACITY: 2.0 INCH (51 MM) SPINDLE MOTOR: 20 HP / 15 HP (30 MIN / CONT.) TURRET (TWIN 12-POSITION) NUMBER OF TOOLS: 24 TOTAL (12 TOOLS PER TURRET) TURRET TYPE: DODECAGONAL / DRUM NON-LIFT TURNING TOOL SHANK SIZE: 1.0 INCH X 1.0 INCH (25 MM) BORING BAR SHANK DIAMETER: 1.5 INCH (40 MM) TURRET INDEXING TIME (1-STEP): 0.2 - 0.5 SECONDS FEED X-AXIS TRAVEL: 9.06 INCH (230 MM) Z-AXIS TRAVEL: 19.69 INCH (500 MM) RAPID TRAVERSE (X-AXIS): 1,200 IPM RAPID TRAVERSE (Z-AXIS): 1,300 IPM COOLANT & ETC POWER SUPPLY REQUIRED: 65 KVA FLOOR SPACE REQUIREMENT: 159.3 INCH X 107.0 INCH MACHINE WEIGHT: 13,200 LBS (6,000 KG) CONTROLLER SPECS MAZATROL T-PLUS CONTROL: CONVERSATIONAL PROGRAMMING FOR SIMULTANEOUS TWIN-TURRET/SPINDLE OPERATIONS. FEATURES: COLOR CRT, BACKGROUND PROGRAMMING, EIA/ISO INPUT, AND TOOL LIFE MANAGEMENT. S/N: 130420

12.75 X 12.75 AUTOMATIC HORIZONTAL BAND SAW - 5 HP, 220V / 440V (3-PHASE) ELECTRICAL, 85 PSI AIR REQUIREMENTS. MAX CAPACITY (ROUND): 12.75", MAX CAPACITY (FLAT/SQUARE): 12" X 12". BLADE SIZE: 1.25" X 14' 6" X 0.042", BLADE SPEED: VARIABLE (TYPICALLY 60-400 FPM). MACHINE WEIGHT: APPROX. 3,410 LBS, FOOTPRINT: APPROX. 108" L X 117" W X 71" H. S/N: 411594

STEEL SHELVING UNIT FILLED WITH ASSORTED DRILLS, MILLS, CUTTERS, AND COLLETS

ASSORTED INDEXABLE BORING BARS & TOOL HOLDERS

REPUBLIC 6 X 12 MANUAL HORIZONTAL SURFACE GRINDER WITH SUBURBAN TOOL COLLET-MASTER CM-5C INDEX FIXTURE AND YUASA INTERNATIONAL PERMANENT MAGNETIC CHUCK. CAPACITY GRINDING CAPACITY: 6" X 12". HORIZONTAL TABLE TRAVEL: 12". CROSS TABLE TRAVEL: 6". MAX. DISTANCE (SPINDLE CENTER TO TABLE): APPROXIMATELY 11" TO 15". SPINDLE MOTOR: 1 HP. MOTOR SPEED: 3,450 RPM. DRIVE DESIGN: DIRECT DRIVE SYSTEM DYNAMICALLY BALANCED TO MINIMIZE VIBRATION. GRINDING WHEEL SIZE: 6" TO 7" DIAMETER X 1/2" WIDTH. FEED TYPE: MANUAL HAND-FEED (RECIPROCATING TABLE). CONSTRUCTION: HEAVY-DUTY MEEHANITE CAST IRON FRAME, STRESS-RELIEVED FOR RIGIDITY AND ACCURACY. WAYS: HAND-SCRAPED DOVETAIL WAYS WITH A RACK AND PINION MECHANISM. DIALS: LARGE, EASY-TO-READ GRADUATED DIALS FOR PRECISE VERTICAL AND CROSS-FEED ADJUSTMENTS. MACHINE WEIGHT: APPROXIMATELY 710 - 850 LBS. OVERALL DIMENSIONS: ~47 L X 39 W X 64 H.

ASSORTED CAT 40 AND CCMT TOOL HOLDERS WITH ASSORTED TOOLING

LARGE LOT OF ASSORTED INDEXABLE LATHE TOOL HOLDERS

ASSORTED INDEXABLE BORING BARS, INSERT HOLDERS, AND INDUSTRIAL TOOL HOLDERS

ASSORTED INDEXABLE INSERT DRILLS

LISTA VERTICAL PULL-OUT CABINET DIMENSIONS 58.5 INCH L X 32 INCH W X 79 INCH T

ASSORTED VDI AND STATIC TOOL HOLDERS & SPINDLE LINERS

INDUSTRIAL WIRE SHELVING UNIT FILLED WITH ASSORTED TOOLS, TOOLING, AND HARDWARE DIMENSIONS 42 INCH L X 24 INCH W X 83.5 INCH T

2018 CONTRX 2 TON ROLLING BRIDGE CRANE WITH COFFING MODEL EMC-500-B 500 LB CAPACITY ELECTRIC CHAIN HOIST. CRANE DIMENSIONS 110" L X 61.5" W X 101.5" T. COFFING MODEL EMC-500-B: CAPACITY RATED LOAD CAPACITY: 500 LBS (1/4 TON). STANDARD LIFT: 10 FEET. LIFTING SPEED: 8 FPM. HEADROOM: 16".

ASSORTED KEYSEAT AND WOODRUFF CUTTERS WITH INSERTS

ASSORTED MILLING HEADS

DAKE MODEL 3A RATCHET LEVERAGE ARBOR PRESS WITH STAND CAPACITY PRESSING CAPACITY: 5 TONS (10,000 LBS) MAXIMUM WORK DIAMETER: 20 INCH THROAT DEPTH: 10 INCH CAPACITY OVER TABLE: 16 INCH CAPACITY OVER TABLE PLATE: 14-1/2 INCH RAM SIZE: 2 INCH X 2 INCH X 23 INCH LEVERAGE RATIO: 55:1 RAM ADVANCE: INTEGRATED HANDWHEEL FOR QUICK RAM ADJUSTMENT TO THE WORKPIECE RETURN MECHANISM: COUNTERWEIGHT FOR RAPID LEVER RETURN AFTER DOWNSTROKE TABLE PLATE: NOTCHED TABLE PLATE (ANVIL) WITH 4-POSITION SLOTS FOR VARIED WORK SUPPORT LARGEST ARBOR SUPPORTED: 4 INCH BASE DIMENSIONS: 10 INCH X 24 INCH MOUNTING: MACHINED GRAY IRON CAST FRAME DRILLED FOR BENCH OR PEDESTAL MOUNTING MACHINE HEIGHT: 28-1/2 INCH MACHINE WEIGHT: 450 LBS (APPROX. 204 KG) CONSTRUCTION: MACHINED GRAY IRON CAST FRAME WITH HEAT-TREATED RAM AND GROUND SPINDLE

12 INCH PRECISION TILTING ROTARY TABLE. TABLE DIAMETER: 12 INCH (300.04 MM). TILTING FUNCTION: INCLINABLE FROM 0 TO 90. INDEXING ACCURACY: 45 SECONDS. VERNIER READING: HIGH-PRECISION 10-SECOND RESOLUTION. GEAR RATIO: 90:1. CENTER TAPER: 4MT. T-SLOT WIDTH: 0.55 INCH (13.97 MM). CENTER HOLE CONCENTRICITY: 0.0004 INCH (0.01 MM). CONSTRUCTION: HEAVY-DUTY CAST IRON BODY WITH HARDENED AND GROUND CRITICAL SURFACES. PARALLELISM: CLAMP SURFACE TO BASE WITHIN 0.0008 INCH (0.02 MM). ORIGIN: JAPAN. DIMENSIONS OVERALL HEIGHT: 7.01 INCH (178.05 MM). BASE LENGTH: 17.6 INCH (447.04 MM). BASE WIDTH: 11.81 INCH (299.97 MM).

HUOT 3-DRAWER MACHINIST TOOL STORAGE CHEST FILLED WITH ASSORTED MILLS

TITAN ATTACHMENTS FMJ2.5 FORK-MOUNTED TELESCOPING CRANE JIB W/ 2 HOOKS. CAPACITY MAXIMUM LIFT CAPACITY (RETRACTED): 5,500 LBS. MINIMUM LIFT CAPACITY (FULLY EXTENDED): 1,650 LBS. STOP POSITIONS: MULTIPLE STOP POSITIONS ALONG THE TELESCOPING BOOM FROM 31" TO 79". POSITION 3 CAPACITY: ~1,580 - 1,960 LBS. POSITION 4 CAPACITY: ~750 - 900 LBS.

ASSORTED CAT 40 TOOL HOLDERS WITH ASSORTED MILL HEADS

6 INCH MACHINE VISE WITH SNAP JAWS 6HSJ-115 HARDENED STEP JAWS S/N: 221219042