Southern Fabrication Owner Retirement Auction

Harris Auctions

Category: METALWORKING & FABRICATION EQUIPMENT

Total Lots: 136

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 101–136 of 136 lots

Year	Make	Model	Lot Description	Hammer Price
	DEWALT	D28402	DEWALT D28402 ANGLE GRINDER SIZE: 4-1/2" 120 VOLTS AC-DC / 50/60 HZ / 10 AMPS SPEED: 11,000 RPM S/N: 126291 DEWALT · D28402	🔒 Subscribe
	SIMPSON	260 SERIES 7 AND 7M	SIMPSON 260 SERIES 7 AND 7M VOLT-OHM-MILLIMETERS ELECTRIC MEASURING METER SIMPSON · 260 SERIES 7 AND 7M	🔒 Subscribe
			3 TON JACK WITH FOOT PEDAL RELEASE	🔒 Subscribe
	ENCO	MULTI HEAD TOOL HOLDER	ENCO MULTI HEAD TOOL HOLDER S/N: 6456 ENCO · MULTI HEAD TOOL HOLDER	🔒 Subscribe
	MILWAUKEE	HD 7	MILWAUKEE HD 7 SANDER/ GRINDER S/N: 0053014066 CAT NO.: 6088 MAX. SPEED: 6000 RPM 120 VOLTS AC-DC / 15.0 AMPS MILWAUKEE · HD 7	🔒 Subscribe
	CAT	40	CAT 40 TOOL HOLDERS WITH TOOLS CAT · 40	🔒 Subscribe
			ANGLE PLATES, 6" L X 6" W X 5" HIGH	🔒 Subscribe
	DEWALT	DWE6411	DEWALT DWE6411 1/4 SHEET PALM SANDER PORTER CABLE 3 X 21 BELT SANDER MODEL 352VS S/N: 145129 TYPE 3 3" X 21" BELT 850 - 1300 SFPM 120 VOLTS AC ONLY / 7.0 AMPS DEWALT · DWE6411	🔒 Subscribe
	MILWAUKEE		MILWAUKEE CORDED ELECTRIC DRILL MILWAUKEE	🔒 Subscribe
	DAYTON	4 DOUBLE END GRINDER	DAYTON 4 DOUBLE END GRINDER CAT NO.: 27315-T WHEEL WIDTH: 3/4" ARBOR DIA.: 1/2" MAX. WHEEL O.D.: 6" (PER MACHINE PLATE) MOTOR: 1/3 HP (115 V / 60 HZ / 4.3 A, 3450 RPM) DAYTON · 4 DOUBLE END GRINDER	🔒 Subscribe
	RODAC	8100	RODAC 8100 PNEUMATIC SANDING PLANE RODAC · 8100	🔒 Subscribe
	ENCO	Q35	ENCO Q35 TOOL POST ENCO · Q35	🔒 Subscribe
	BSW	3-JAW CHUCK	BSW 3-JAW CHUCK WITH 3" THRU-HOLE BSW · 3-JAW CHUCK	🔒 Subscribe
			PARTS ROOM WITH 3 TOOL SHELVES	🔒 Subscribe
			LOT OF 4 MICROMETERS: (2) 1/2", (1) 2-3", (1) 3"-4"	🔒 Subscribe
			LOT OF 4: COLLET CHUCKS	🔒 Subscribe
			LOT OF 2 ANGLE PLATES: (1) 6" X 6" X 5" HIGH, (1) 6" X 5" X 6" HIGH	🔒 Subscribe
			HEAVY DUTY SHOP TABLE ON CASTERS, 62" L X 44" X 36"	🔒 Subscribe
			HEAVY DUTY SHOP TABLE ON CASTERS, 81" L X 49" W X 36" TALL	🔒 Subscribe
			CUSTOM MADE CART LIFT	🔒 Subscribe
	MILWAUKEE		MILWAUKEE TOOL BOX MILWAUKEE	🔒 Subscribe
	CHALLENGE		CHALLENGE AIR COMPRESSOR ON HEAVY DUTY SKID WITH AIR TANK RECEIVER CHALLENGE	🔒 Subscribe
			ASSORTED COLLET CHUCKS WITH ASSORTED TOOLING	🔒 Subscribe
	ENCO	35-A	ENCO 35-A TOOL HOLDER (3) ENCO 35-B TOOL HOLDER (1) YUASA 740-201 TOOL HOLDER (1) ENCO · 35-A	🔒 Subscribe
			ASSORTED COLLET CHUCKS WITH ASSORTED TOOLING	🔒 Subscribe
			WOODEN OPEN FACE SHELF WITH CONTENTS	🔒 Subscribe
			LOT OF ASSORTED MOTORS	🔒 Subscribe
			MECHANICAL ELECTRIC VISE	🔒 Subscribe
			METAL RACK 3 SHELVES 96"L X 13"W X 43"H. - METAL RACK 3 SHELVES 96L X 13W X 43H.	🔒 Subscribe
1941	MONARCH	MODEL 14	1941 MONARCH MODEL 14 C ENGINE LATHE S/N: 11902 SWING: 14" (CATALOG SPECS) ACTUAL SWING: 16.3 DISTANCE BETWEEN CENTERS: 30" SPINDLE SPEEDS: (16) 16 - 650 RPM SPINDLE BORE: 2" INCLUDES: CHUCK GUARD TAILSTOCK CHIP PAN BED 1941 · MONARCH · MODEL 14	🔒 Subscribe
	SUPERIOR HONE	J-2	SUPERIOR HONE J-2 HORIZONTAL HONING MACHINE S/N: 7-6600 SUPERIOR HONE · J-2	🔒 Subscribe
	LEADWELL	V-25	LEADWELL V-25 CNC VERTICAL MACHINING CENTER S/N: L1SIG0551 GENERAL SPECIFICATIONS: MITSUBISHI M50 CNC CONTROL (NOTE: MACHINE IS OPERATIONAL BUT THE DISPLAY IS NOT WORKING) TABLE: 30.3 X 15.7 X-AXIS TRAVEL: 25.6" Y-AXIS TRAVEL: 16.1" Z-AXIS TRAVEL: 16.1" SPINDLE SPEED: 8000 RPM SPINDLE MOTOR: 10 HP SPINDLE TAPER: BT-40 20 TOOL ATC NOTE: MACHINE IS OPERATIONAL BUT THE DISPLAY IS NOT WORKING NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION LEADWELL · V-25	🔒 Subscribe
	BRIDGEPORT	ANILAM 3000M	BRIDGEPORT ANILAM 3000M 3-AXIS CNC VERTICAL MILLING MACHINE TABLE SIZE: 9" X 49" SPINDLE MOTOR: 3 HP CONTROL: ANILAM 300M CONTROL BRIDGEPORT · ANILAM 3000M	🔒 Subscribe
			ABRASIVE HORIZONTAL BORING MILL (IN PARTS)	🔒 Subscribe
	FANUC		LOT OF 2 FANUC ELECTRICAL CABINETS FANUC	🔒 Subscribe
			FILE CABINET WITH 5 DRAWERS, BLUE PRINT HOLDER	🔒 Subscribe

Year	Make	Model	Description	Price
	DEWALT	D28402	DEWALT D28402 ANGLE GRINDER SIZE: 4-1/2" 120 VOLTS AC-DC / 50/60 HZ / 10 AMPS SPEED: 11,000 RPM S/N: 126291	🔒 Subscribe
	SIMPSON	260 SERIES 7 AND 7M	SIMPSON 260 SERIES 7 AND 7M VOLT-OHM-MILLIMETERS ELECTRIC MEASURING METER	🔒 Subscribe
			3 TON JACK WITH FOOT PEDAL RELEASE	🔒 Subscribe
	ENCO	MULTI HEAD TOOL HOLDER	ENCO MULTI HEAD TOOL HOLDER S/N: 6456	🔒 Subscribe
	MILWAUKEE	HD 7	MILWAUKEE HD 7 SANDER/ GRINDER S/N: 0053014066 CAT NO.: 6088 MAX. SPEED: 6000 RPM 120 VOLTS AC-DC / 15.0 AMPS	🔒 Subscribe
	CAT	40	CAT 40 TOOL HOLDERS WITH TOOLS	🔒 Subscribe
			ANGLE PLATES, 6" L X 6" W X 5" HIGH	🔒 Subscribe
	DEWALT	DWE6411	DEWALT DWE6411 1/4 SHEET PALM SANDER PORTER CABLE 3 X 21 BELT SANDER MODEL 352VS S/N: 145129 TYPE 3 3" X 21" BELT 850 - 1300 SFPM 120 VOLTS AC ONLY / 7.0 AMPS	🔒 Subscribe
	MILWAUKEE		MILWAUKEE CORDED ELECTRIC DRILL	🔒 Subscribe
	DAYTON	4 DOUBLE END GRINDER	DAYTON 4 DOUBLE END GRINDER CAT NO.: 27315-T WHEEL WIDTH: 3/4" ARBOR DIA.: 1/2" MAX. WHEEL O.D.: 6" (PER MACHINE PLATE) MOTOR: 1/3 HP (115 V / 60 HZ / 4.3 A, 3450 RPM)	🔒 Subscribe
	RODAC	8100	RODAC 8100 PNEUMATIC SANDING PLANE	🔒 Subscribe
	ENCO	Q35	ENCO Q35 TOOL POST	🔒 Subscribe
	BSW	3-JAW CHUCK	BSW 3-JAW CHUCK WITH 3" THRU-HOLE	🔒 Subscribe
			PARTS ROOM WITH 3 TOOL SHELVES	🔒 Subscribe
			LOT OF 4 MICROMETERS: (2) 1/2", (1) 2-3", (1) 3"-4"	🔒 Subscribe
			LOT OF 4: COLLET CHUCKS	🔒 Subscribe
			LOT OF 2 ANGLE PLATES: (1) 6" X 6" X 5" HIGH, (1) 6" X 5" X 6" HIGH	🔒 Subscribe
			HEAVY DUTY SHOP TABLE ON CASTERS, 62" L X 44" X 36"	🔒 Subscribe
			HEAVY DUTY SHOP TABLE ON CASTERS, 81" L X 49" W X 36" TALL	🔒 Subscribe
			CUSTOM MADE CART LIFT	🔒 Subscribe
	MILWAUKEE		MILWAUKEE TOOL BOX	🔒 Subscribe
	CHALLENGE		CHALLENGE AIR COMPRESSOR ON HEAVY DUTY SKID WITH AIR TANK RECEIVER	🔒 Subscribe
			ASSORTED COLLET CHUCKS WITH ASSORTED TOOLING	🔒 Subscribe
	ENCO	35-A	ENCO 35-A TOOL HOLDER (3) ENCO 35-B TOOL HOLDER (1) YUASA 740-201 TOOL HOLDER (1)	🔒 Subscribe
			ASSORTED COLLET CHUCKS WITH ASSORTED TOOLING	🔒 Subscribe
			WOODEN OPEN FACE SHELF WITH CONTENTS	🔒 Subscribe
			LOT OF ASSORTED MOTORS	🔒 Subscribe
			MECHANICAL ELECTRIC VISE	🔒 Subscribe
			METAL RACK 3 SHELVES 96"L X 13"W X 43"H. - METAL RACK 3 SHELVES 96L X 13W X 43H.	🔒 Subscribe
1941	MONARCH	MODEL 14	1941 MONARCH MODEL 14 C ENGINE LATHE S/N: 11902 SWING: 14" (CATALOG SPECS) ACTUAL SWING: 16.3 DISTANCE BETWEEN CENTERS: 30" SPINDLE SPEEDS: (16) 16 - 650 RPM SPINDLE BORE: 2" INCLUDES: CHUCK GUARD TAILSTOCK CHIP PAN BED	🔒 Subscribe
	SUPERIOR HONE	J-2	SUPERIOR HONE J-2 HORIZONTAL HONING MACHINE S/N: 7-6600	🔒 Subscribe
	LEADWELL	V-25	LEADWELL V-25 CNC VERTICAL MACHINING CENTER S/N: L1SIG0551 GENERAL SPECIFICATIONS: MITSUBISHI M50 CNC CONTROL (NOTE: MACHINE IS OPERATIONAL BUT THE DISPLAY IS NOT WORKING) TABLE: 30.3 X 15.7 X-AXIS TRAVEL: 25.6" Y-AXIS TRAVEL: 16.1" Z-AXIS TRAVEL: 16.1" SPINDLE SPEED: 8000 RPM SPINDLE MOTOR: 10 HP SPINDLE TAPER: BT-40 20 TOOL ATC NOTE: MACHINE IS OPERATIONAL BUT THE DISPLAY IS NOT WORKING NOTE: ALL SPECIFICATIONS SUBJECT TO VERIFICATION	🔒 Subscribe
	BRIDGEPORT	ANILAM 3000M	BRIDGEPORT ANILAM 3000M 3-AXIS CNC VERTICAL MILLING MACHINE TABLE SIZE: 9" X 49" SPINDLE MOTOR: 3 HP CONTROL: ANILAM 300M CONTROL	🔒 Subscribe
			ABRASIVE HORIZONTAL BORING MILL (IN PARTS)	🔒 Subscribe
	FANUC		LOT OF 2 FANUC ELECTRICAL CABINETS	🔒 Subscribe
			FILE CABINET WITH 5 DRAWERS, BLUE PRINT HOLDER	🔒 Subscribe

DEWALT D28402

DEWALT D28402 ANGLE GRINDER SIZE: 4-1/2" 120 VOLTS AC-DC / 50/60 HZ / 10 AMPS SPEED: 11,000 RPM S/N...

SIMPSON 260 SERIES 7 AND 7M

SIMPSON 260 SERIES 7 AND 7M VOLT-OHM-MILLIMETERS ELECTRIC MEASURING METER...

3 TON JACK WITH FOOT PEDAL RELEASE

ENCO MULTI HEAD TOOL HOLDER

ENCO MULTI HEAD TOOL HOLDER S/N: 6456...

MILWAUKEE HD 7

MILWAUKEE HD 7 SANDER/ GRINDER S/N: 0053014066 CAT NO.: 6088 MAX. SPEED: 6000 RPM 120 VOLTS AC-DC / ...

CAT 40

CAT 40 TOOL HOLDERS WITH TOOLS...

ANGLE PLATES, 6" L X 6" W X 5" HIGH

DEWALT DWE6411

DEWALT DWE6411 1/4 SHEET PALM SANDER PORTER CABLE 3 X 21 BELT SANDER MODEL 352VS S/N: 145129 TYPE 3...

MILWAUKEE

MILWAUKEE CORDED ELECTRIC DRILL...

DAYTON 4 DOUBLE END GRINDER

DAYTON 4 DOUBLE END GRINDER CAT NO.: 27315-T WHEEL WIDTH: 3/4" ARBOR DIA.: 1/2" MAX. WHEEL O.D.: 6" ...

RODAC 8100

RODAC 8100 PNEUMATIC SANDING PLANE...

ENCO Q35

ENCO Q35 TOOL POST...

BSW 3-JAW CHUCK

BSW 3-JAW CHUCK WITH 3" THRU-HOLE...

PARTS ROOM WITH 3 TOOL SHELVES

LOT OF 4 MICROMETERS: (2) 1/2", (1) 2-3", (1) 3"-4"

LOT OF 4: COLLET CHUCKS

LOT OF 2 ANGLE PLATES: (1) 6" X 6" X 5" HIGH, (1) 6" X 5" X 6" HIGH

HEAVY DUTY SHOP TABLE ON CASTERS, 62" L X 44" X 36"

HEAVY DUTY SHOP TABLE ON CASTERS, 81" L X 49" W X 36" TALL

CUSTOM MADE CART LIFT

MILWAUKEE

MILWAUKEE TOOL BOX...

CHALLENGE

CHALLENGE AIR COMPRESSOR ON HEAVY DUTY SKID WITH AIR TANK RECEIVER...

ASSORTED COLLET CHUCKS WITH ASSORTED TOOLING

ENCO 35-A

ENCO 35-A TOOL HOLDER (3) ENCO 35-B TOOL HOLDER (1) YUASA 740-201 TOOL HOLDER (1)...

ASSORTED COLLET CHUCKS WITH ASSORTED TOOLING

WOODEN OPEN FACE SHELF WITH CONTENTS

LOT OF ASSORTED MOTORS

MECHANICAL ELECTRIC VISE

METAL RACK 3 SHELVES 96"L X 13"W X 43"H. - METAL RACK 3 SHELVES 96L X 13W X 43H.

1941 MONARCH MODEL 14

1941 MONARCH MODEL 14 C ENGINE LATHE S/N: 11902 SWING: 14" (CATALOG SPECS) ACTUAL SWING: 16.3 DISTAN...

SUPERIOR HONE J-2

SUPERIOR HONE J-2 HORIZONTAL HONING MACHINE S/N: 7-6600...

LEADWELL V-25

LEADWELL V-25 CNC VERTICAL MACHINING CENTER S/N: L1SIG0551 GENERAL SPECIFICATIONS: MITSUBISHI M50 CN...

BRIDGEPORT ANILAM 3000M

BRIDGEPORT ANILAM 3000M 3-AXIS CNC VERTICAL MILLING MACHINE TABLE SIZE: 9" X 49" SPINDLE MOTOR: 3 HP...

ABRASIVE HORIZONTAL BORING MILL (IN PARTS)

FANUC

LOT OF 2 FANUC ELECTRICAL CABINETS...

FILE CABINET WITH 5 DRAWERS, BLUE PRINT HOLDER

<< Previous 1 2 3

Recent Searches

Login

Reset Password

Southern Fabrication Owner Retirement Auction

Save to Project Folder

Print Options

Unlock Unlimited Printing