Nutra Manufacturing Packaging Equipment

2016 JTJ JTJ SEMI AUTOMATIC CAPSULE FILLING MACHINE WITH 3 VFD CONTROLLERS FOR FEEDING, FILLING AND CLOSING. TOOLING WITH MACHINE#0, #2 , #1 , #00PINS AND BOLTS INCLUDEDBLOCKS & FINGERSWITH 3 VFD CONTROLLERS FOR FEEDING, FILLING AND CLOSING. SERIAL NUMBER: 16039 VOLTS: 380 HERTZ: 50 OVERALL DIMENSIONS: 53"L X 27.5"W X 63"H WEIGHT: 400KG PRODUCT SPECIFICATIONS: MAX CAPSULES/HR: 25,000 CAPSULE SIZE: NO. 0-5 INPUT POWER: 480V MOTOR POWER: 4KW POWER: 2.2KW STAINLESS STEEL CONSTRUCTION WITH VACUUM PUMP SUITABLE FOR POWDER OR GRAIN.

SHANGHAI DEVELOP MACHINERY CO. LTD. ZRJ-650 VACUUM EMULSIFYING MIXER MODEL: ZRJ-650 SERIAL NUMBER: SDM1807-01 POWER SUPPLY: 220V 60HZ 3 PH 11.5+44 KW 271A THE SPECIAL DESIGN OF HIGH SPEED EMULSIFYING HEAD AND LOW SPEED AGITATOR AND BLADES CAN ACHIEVE HIGH EFFICIENCY OF MIXING AND HOMOGENIZING, AND THE TEFLON SCRAPERS OF THE AGITATOR CAN SCRAPE OFF THE MATERIALS WHICH STICK TO THE INNER WALL OF VESSEL, AND MAKE THE COMPLETE MIXING AT SAME TIME WITHOUT CORNER. THE TEFLON SCRAPER IS FIXED AT THE OUTER MIXING FRAME WHICH WILL CHANGE THEIR POSITION BY ALWAYS TOUCHING THE INNER WALL WHEN ROTATING. THOSE SCRAPERS CAN HELP THE HEAT-EXCHANGE DURING MIXING AND ALSO REDUCE THE TIME OF PRODUCTION. EMULSIFYING TANK DESIGN VOLUME650 LEMULSIFYING TANK WORKING CAPACITY520 LEMULSIFYING TANK HOMOGENIZER MOTOR POWER11 KW / 380 V / 50 HZEMULSIFYING TANK HOMOGENIZER SPEED0-2800 RPMEMULSIFYING TANK SCRAPPER STIRRING MOTOR POWER4 KW / 380 V / 50 HZEMULSIFYING TANK SCRAPPER STIRRING SPEED0-86 RPMEMULSIFYING TANK ELECTRICAL HEATING POWER18 KW / 380 V / 50 HZWATER TANK DESIGN VOLUME400 LWATER TANK WORKING CAPACITY320 LWATER TANK POWER1.1 KW / 380 V / 50 HZWATER TANK SPEED960 RPMWATER TANK ELECTRICAL HEATING POWER18 KW / 380 V / 50 HZOIL TANK DESIGN VOLUME320 LOIL TANK WORKING CAPACITY250 LOIL TANK POWER1.1 KW / 380 V / 50 HZOIL TANK SPEED960 RPMOIL TANK ELECTRICAL HEATING POWER12 KW / 380 V / 50 HZOIL TANK VACUUM POWER4 KW / 380 V / 50 HZTOTAL70 KW / 380 V / 50 HZ

2016 SHANGHAI DEVELOP MACHINERY CO. LTD. ZLG-8 8 HEAD LIQUID FILLING LINE WITH ROTARY CAPPER S/N: SDM1826-02 POWER SUPPLY: 220V 60HZ 1 PH 1 KW 8A AIR PRESSURE: 0.4-0.5 MPA ZLG-8 MANUFACTURER DESCRIPTION: ZLG-8 TYPE OINTMENT FILLING MACHINE 1) INTRODUCTION THIS MACHINE IS SPECIAL EQUIPMENT QUANTITATIVE FILLING PASTE MATERIALS. SELF-PRIMING PISTON PUMP VACUUM QUANTITATIVE MEASUREMENT PRECISION, STABLE FILLING, FAST; EACH FILLING HEAD CAN BE ADJUSTED SEPARATELY MEASURED, EASY TO OPERATE. FILLING MACHINE ARE ALL HARD PIPE CONNECTION, WASHABLE CONVENIENCE. THE AUTOMATIC CONTROL, NO BOTTLE NO FILLING. 2) THE MAIN TECHNICAL PARAMETERS PRODUCTION CAPACITY: 90 ~ 100 BOTTLES / MIN APPLICABLE SPECIFICATIONS: 50G FILLING HEAD: 8 PACKING ERROR: 1% FILLING TEMPERATURE: 90 OC COMPRESSED AIR PRESSURE: 0.4 ~ 0.5MPA POWER: 1KW DIMENSIONS (MM): 1200 700 1800 ROTARY CAPPING MACHINE: MODEL: XDGJ-6 SERIAL NUMBER: SDM1826-03 POWER SUPPLY: 220V 60HZ 3-PH 2 KW 13A AIR PRESSURE: 0.5-0.7 MPA MFR DATE: 11/2016 XDGJ-6 MANUFACTURER DESCRIPTION: XDGJ6 ROTARY INNER CAPPING AND OUTER CAPPING MACHINE 1) INTRODUCTION THIS MACHINE IS SUITABLE FOR COSMETICS BOTTLES WITH PAD AND ROTATING CAP SEALING, A PLANETARY STRUCTURE, WITH SIX HEAD PAD AND SIX ROTARY CAP. SCREW BOTTLE, GOOD SYNCHRONIZATION; CONTINUOUS CEILING IN PAD AND PAD, ACCURATE POSITIONING, SMOOTH MOVEMENT; LIFTING TYPE SORTING MECHANISM, LOW NOISE; PNEUMATIC COVER GRABBING, CONTINUOUS ROTARY COVER STRUCTURE, STABLE PERFORMANCE; CONSTANT TORQUE SCREW CAP, AND ROTARY FORCE CAN LID, APPEARANCE IS NOT DESTRUCTION. THE MACHINE IS EASY TO MAINTAIN AND HAS STRONG ADAPTABILITY. 2) THE MAIN TECHNICAL PARAMETERS PRODUCTION CAPACITY: 90 ~ 100 BOTTLES / MIN APPLICABLE COVER: DIAMETER 80MM GASKET INSERTING HEAD: 6 CAPPING HEAD: 6 SCREW CAP RATE: 99.5% POWER SOURCE: 220V/1/60HZ POWER: 2KW DIMENSIONS: 2850*1700*2100MM

CHARLES LAPIERRE INC ELE-DOUB CAP ELEVATOR STAINLESS STEEL CONSTRUCTION SUITABLE FOR HIGH-PRODUCTION PLANTS, THE CAP ELEVATORS CAN BE INSTALLED IN HIGH-SPEED INSTALLATIONS AND PERMITS TO AUTOMATICALLY FEED THE CAPS TO THE SHORTER TANK OF THE CAPPING MACHINE. S/N: 13789106

2014 DR. PHARM CFM-3500 AUTOMATIC ENCAPSULATION MACHINE S/N: 1732 PHASE: 3 VOLTS: 220 MAX OUTPUT (CAPSULES/MING): 3500 NUMBER OF SEGMENT BORINGS: 24 FILLING PRECISION: +/- 3% NOISE LEVEL<= 78 DB POWER: 7.5 KW DIMENSIONS: (L X W X H)1410 MM X 1144 MM X 2000 MM WEIGHT: 1850 KG THE CFM-3500 IS SPECIFICALLY DESIGNED AND ENGINEERED FOR THE PHARMACEUTICAL AND NUTRACEUTICAL INDUSTRIES, THE ADVANCED CFM-3500 IS AN ALL-NEW HIGH PERFORMANCE STAINLESS STEEL CAPSULE FILLER DESIGN WITH A SMALLER BODY/FRAME RESULTING IN A SMALLER FOOTPRINT WITH EASIER ACCESS FROM ALL SIDES. A HIGH STRENGTH DRIVE MECHANISM GIVES USERS RELIABLE CAPSULE FILLING, WHILE A NEW CAM DESIGN RESULTS IN INCREASED CAPSULE FILL PRECISION, LOWER OPERATING NOISE, AND LOWER VIBRATION. THE USER-FRIENDLY CFM-3500 FEATURES A SIEMENS HMI AND SIEMENS PLC CONTROLS. A NEW DOSING DISK AND SEAL DESIGN COUPLED WITH INTERNAL/EXTERNAL TAMPING PIN SHIELDS ALL HELP ELIMINATE POWDER LEAKAGE.

POWDER ELEVATOR MDL LX-4004 - 1- USED LABH POWDER ELEVATOR POWDER AUGER S/N: 5046 FILLING RANGE: 100G - 1KG NET WEIGHT: 250 GROSS WEIGHT: 400 THE MACHINE CONSIST OF: MAIN DRIVE: 30:1 RATION REDUCTION GEARBOX AS DRIVEN BY AN ELECTRIC MOTOR WITH THE HELP OF `V BELT PULLEY AND MIXER DRIVE SHAFT IS DRIVEN BY CHAIN & SPROCKET. THE DRIVE UNIT IS ENCLOSED IN M.S. STRUCTURE COVERED WITH S.S. SHEET. HOPPER ASSEMBLY: 50 KG HOPPER MOUNTED ON TOP OF AUGER FUNNEL ASSEMBLY. AUGER ASSEMBLY: ROTATING AUGER IS MOUNTED IN THE CENTER OF HOPPER ASSEMBLY ALONG WITH STEADY S.S.FUNNEL. MIXER ASSEMBLY: MIXER ASSEMBLY IS MOUNTED IN THE CENTRE AND ON TOP OF THE AUGER FOR PROPER MIXING OF MATERIAL. CONTROL THE ROTATING MOVEMENT OF THE AUGER. ELECTRICAL ASSEMBLY: ELECTRICAL ASSEMBLY IS HOUSED IN THE PANEL BOX. THE MACHINE CONTAINING MCBS, CONTROLLERS, AND PUSH BUTTONS, THUMBWHEEL SWITCHES.

4 HEAD LIQUID FILLER MONO BLOCK WITH CHUCK CAPPER PERASTALTIC PUMPS

DUAL LANE 4 HEAD MONO BLOCK FILLER

POWDER FILLER

2/3 JACKETED KETTLE WITH MIXER AGITATION ELECTRICALLY HEATED FULLY SWEEP BLADE

CAP ELEVATOR

FULLY JACKETED KETTLE 80 GALLONS SPRAYER SYSTEM SKID WITH 40 GALLON COMPRESSOR

HPS TRANSFORMER PART NO: SGA0045KB 480 VOLTS: PHASE: 3 TYPE: K KVA 45 LV/BT: 208Y/ 120V S/N: CB00750495

JEFFERSON ELECTRIC 423-3257-055 TRANSFORMER 55 KVA, 112.5 PHASE: 3, HERTZ: 60, CLASS: AA%IZ 6.4, HIGH VOLTAGE: 480 DELTA, LOW VOLTAGE: 240 DELTA/120 CT, INSULATION CLASS: 220 C

FEDERAL PACIFIC 15 KVA @150 C RISE IMP 4.86% PRIMARY 480 (H) SECONDARY 480Y/120 (X) AMBIENT TEMP 40 C MAX 60 HZ 3 PHASE 15 KVA @150 C RISE IMP 4.86% PRIMARY 480 (H) SECONDARY 480Y/120 (X) AMBIENT TEMP 40 C MAX 60 HZ 3 PHASE TRANSFORMER

SLEEVER

VIDEOJET 1710 PRINTER ON ROLLER CART MODEL: 1710 PART NO: 399921-929-01 VOLTS: 100-120 PHASE: 1 W:120 HZ: 50/60 A:3 S/N: 1519687C19ZH

VIDEOJET 1710 PRINTER ON ROLLER CART MODEL: 1710 PART NO: 399921-929-01 VOLTS: 100-120 PHASE: 1 W:120 HZ: 50/60 A:3 S/N: 1524915C19ZH

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 46" DIAMETER, 3.25" OUTLET, 48" TALL

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 46" DIAMETER, 3.25" OUTLET, 48" TALL

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 46" DIAMETER, 3.25" OUTLET, 48" TALL

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 46" DIAMETER, 3.25" OUTLET, 48" TALL

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 33" DIAMETER, 3.25" OUTLET, 47" TALL

VIDEO JET 1710 PRINTER MDL: 1710 120 VOLTS S/N: 1612127C19ZH

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 33" DIAMETER, 3.25" OUTLET, 47" TALL

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 33" DIAMETER, 3.25" OUTLET, 47" TALL

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 33" DIAMETER, 3.25" OUTLET, 47" TALL

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 33" DIAMETER, 3.25" OUTLET, 47" TALL

ROLLER BIN TOTE DIMENSIONS: 15.5" OPENING, 33" DIAMETER, 3.25" OUTLET, 47" TALL

JINCHENGBAO COMPRESSOR

CLEATED CONVEYOR WITH VARIABLE SPEED DRIVE

CAPSULE STORAGE TANK DIMENSIONS: 4' LENGTH, 23" IN DIAMETER OPENING: 12"X12"

AUTOMATIC COTTONING MACHINE BPM: MAX 80 VOLTS: 220 HERTZ: 50-60 PHASE: 3

SHANGHAI TIANHE PHARMACEUTICAL MACHINERY CO LTD. XGJ-120 AUTOMATIC CAPPER WITH ELEVATOR MODEL: XGJ-120 VOLTS: 220 HERTZ: 50-60 WATTS: 1300 S/N: 160709

IMA TR 100LT BLISTER PACKAGING MACHINE A STAND ALONE COMPLETE PACKAGING MACHINE, DESIGNED AND MANUFACTURED TAKING INTO CONSIDERATION GMP STANDARDS. THE TR 100LT HAS A BALCONY TYPE CONSTRUCTION WITH WORKING ASSEMBLIES AT THE FRONT. THE BLISTER PACKAGING MACHINE TR 100 L IS AN INTERMITTENT MOTION, FLAT, COMPRESSED AIR FORMING AND FLAT SEALING BLISTER PACKING MACHINE WITH AN OUTPUT MAX. 150 PACKS/MINUTE. SPECIALLY DESIGN FOR TABLET & CAPSULES, THE IMA TR100 LT CAN BE USED TO THERMOFORM OR COLD FORM BLISTERS USING ALL KINDS. ELECTRICAL: 400V, 50HZ, 3 PHASE INCLUDES THE FOLLOWING: EURCOLD CHILLER (ELECTRICAL: 230V, 50/60HZ) ADVANTAGE PORTABLE CHILLER MODEL: MI-0.5A-21HF SERIAL NO: 124414 VOLTAGE: 230/1/60 FLA: 9.2 PLATEN PRINTER MODEL: 808. 25. 5. 5R SERIAL NUMBER: 57978 CURRENT: AC VOLTS: 220 CYC: 50

CONTRACT MANUFACTURING PACKAGING & FORMULATION FACILITY DIETARY SUPPLEMENTS AND POWDER PACKAGING TURN KEY OPPORTUNITY

PATENTED PROCESSES TECHNOLOGY & TRADEMARK TWO-PIECE, HARDSHELL, LIQUID - FILLED CAPSULES SPECIALIZED, PATENTED LIQUID CAPSULE TECHNOLOGY ALLOWS CUSTOMERS TO ASSESS AND MAXIMIZE THE POTENTIAL OF NEW OR EXISTING FORMULATIONS WITH NO MINIMUM ORDER LIMITATIONS.

AF-90T FULLY AUTOMATIC CAPSULE-FILLING MACHINE THAT CAN FILL A LARGE VARIETY OF POWDER FORMULATIONS INTO HARD GELATIN CAPSULES. PRODUCT SPECIFICATIONS: MAIN MOTOR: 1.5 KW ( 2 HP) AT 1440 RPM. VACUUM REQUIRED (CAPSULE SEPARATION): 1100 LPM AT 26 OF MERCURY. VACUUM REQUIRED (CLEANING): 2800 LPM AT 4 OF MERCURY COMPRESSED AIR: 300 LPM AT 6KG/CM2 OUTPUT: UP TO 90,000 CAPSULES/ HOUR FOR POWER FILLING UP TO 80,000 CAPSULES/ HOUR FOR PELLET FILLING UP TO 50,000 CAPSULES FOR TABLET FILLING (SINGLE TABLET) PRODUCTS: POWDERS PELLETS MICRO TABLETS COMBINATION FILINGS TOOLING SIZES 0, 0L, 00, 1 COME WITH MACHINE NO POLISHER OR METAL DETECTOR COMES WITH OPERATIONS MANUAL OVERALL DIMENSIONS: 1650MM X 1290MM X 2050MM WEIGHT: 2350 KGS VOLTS: 415 HERTZ: 50 PHASE: 3

2016 JTJ JTJ SEMI AUTOMATIC CAPSULE FILLING MACHINE WITH 3 VFD CONTROLLERS FOR FEEDING, FILLING AND CLOSING. S/N: 16037 VOLTS: 380 HERTZ: 50 MAX CAPSULES/HR: 25,000 INPUT POWER: 480V MOTOR POWER: 4KW CAPSULE SIZE: NO. 0-5 POWER: 2.2KW OVERALL DIMENSIONS: 53"L X 27.5"W X 63"H WEIGHT: 400KG STAINLESS STEEL CONSTRUCTION WITH VACUUM PUMP SUITABLE FOR POWDER OR GRAIN.

2018 SHANGHAI TIANHE PHARMACEUTICAL MACHINERY CO., LTD. NJP-1200 AUTOMATIC CAPSULE FILLING MACHINE S/N: 006030 VOLTS: 380 HERTZ: 50 KW: 5.55 PHASE: 3 MOTOR: 1.5 KW PRODUCTION: MAX 1200 CAPSULES/MIN OVERALL DIMENSIONS: 1200MM X 1100 X 2050MM WEIGHT: 900KG TOOLING WITH MACHINESIZE 0 COMPLETE SET ON NJPSIZE #1 #2 #0 #00PINS AND BOLTS INCLUDEDBLOCKS & FINGERS TOTAL SETS OF TOOLING: 4

HMC IM 7-14 LIQUID POUCH MACHINE INCOMPLETE S/N: RH2015436 SUPPLY VOLTAGE: 240 VAC 3 PH CONTROL VOLTAGE: 24 VDC DISCONNECTION RATING 50 AMPS THE IM POUCHMASTER HORIZONTAL FORM FILL SEAL SERIES PROVIDES HIGH SPEED FILLING OF ALL PRODUCTS, INCLUDING POWDERS AND LIQUIDS IN THE MOST FLEXIBLE MACHINE DESIGN AVAILABLE ON THE MARKET TODAY. SPEEDS UP TO 100 PPM (1-UP) ARE FREQUENTLY OBSERVED WITH MANY PRODUCTS. WHEN FITTED WITH AN HMC ON OR OFF LINE SLITTER, SPEEDS UP TO 270 PPM MAY BE ACHIEVED.

HMC IM 5-21 LIQUID POUCH MACHINE INCOMPLETE MODEL: IM 5-21 SERIAL NUMBER: H2016464 SUPPLY VOLTAGE: 240 VAC 3 PH CONTROL VOLTAGE: 24 VDC DISCONNECTION RATING: 50 AMPS THE IM POUCHMASTER HORIZONTAL FORM FILL SEAL SERIES PROVIDES HIGH SPEED FILLING OF ALL PRODUCTS, INCLUDING POWDERS AND LIQUIDS IN THE MOST FLEXIBLE MACHINE DESIGN AVAILABLE ON THE MARKET TODAY. SPEEDS UP TO 100 PPM (1-UP) ARE FREQUENTLY OBSERVED WITH MANY PRODUCTS. WHEN FITTED WITH AN HMC ON OR OFF LINE SLITTER, SPEEDS UP TO 270 PPM MAY BE ACHIEVED.

HMC IM 5-21 LIQUID POUCH MACHINE INCOMPLETE MODEL: IM 5-21 SERIAL NUMBER: H2014398 SUPPLY VOLTAGE: 240 VAC 3 PH CONTROL VOLTAGE: 24 VDC DISCONNECTION RATING: 50 AMPS THE IM POUCHMASTER HORIZONTAL FORM FILL SEAL SERIES PROVIDES HIGH SPEED FILLING OF ALL PRODUCTS, INCLUDING POWDERS AND LIQUIDS IN THE MOST FLEXIBLE MACHINE DESIGN AVAILABLE ON THE MARKET TODAY. SPEEDS UP TO 100 PPM (1-UP) ARE FREQUENTLY OBSERVED WITH MANY PRODUCTS. WHEN FITTED WITH AN HMC ON OR OFF LINE SLITTER, SPEEDS UP TO 270 PPM MAY BE ACHIEVED.

2004 STC ZPW23 23 STATION TABLET PRESS SPECIALLY DESIGNED TOOLING TO PRODUCE BILAYER TABLETS AND RING-LIKE TABLETS - MAIN COMPRESSION OVERLOAD PROTECTION - GMP COMPLIANT WITH THE OPERATION BEING SIMPLE AND CLEANING EASY - CIE COMPLIANCE IS OPTIONAL. MODEL NUMBER: YY0221 NUMBER OF STATIONS: 23 PUNCH TYPE: DEDICATED TOOLING MAX. TABLET DIAMETER: MM 20 MAX. DEPTH OF FILLING: MM 18 SPEED OF TURRET: R/MIN 10~40 MAX. OUTPUT TABLETS/H : 55000 MAX. THICKNESS OF TABLET: MM 9 MAX. COMPRESSION FORCE: KN 80 POWER SUPPLY: V/HZ AC 380/50/3 MAIN MOTOR POWER: KW 4 FOOTPRINT: 930950MM HEIGHT OF THE MACHINE: 1850MM WEIGHT OF THE MAIN MACHINE: KG 1500 S/N: 204086

2019 SHANGHAI TIANFAN PHARMACEUTICAL GL5-100 ROLLER COMPACTOR DRY GRANULATOR WITH DIGITAL PLC S/N: TP19112001 POWER: 10.35 KW VOLTAGE: 3P/220V/60HZ PRODUCTION CAPACITY: 30~100KG/H WEIGHT: 2500(KG) GRANULATING SPEED: 0-375 RPM MACHINE SIZE: 37W X 53D X 86H (INCHES)* *NOT INCLUDING THE EXTERNAL ELECTRIC CABINET, VIBRATING SIFTER, VACUUM CONVEYOR, OR DUST COLLECTOR (ALL DETAILED BELOW) USER MANUAL: DIGITAL PRODUCT INFORMATION: THIS IS A VERSATILE POWDER DENSIFICATION AND GRANULATION MACHINE DESIGNED TO CONTINUALLY PRESS DRY POWDER INTO UNIFORM RIBBONS OF SPECIFIC DENSITY (ROLLER COMPACTION), GRANULATE THE RIBBONS TO A SPECIFIC GRANULE SIZE THROUGH A 2-STAGE GRANULATOR, AND SIFT THE GRANULES VIA A CONTINUOUS VIBRATING SIFTER TO SEPARATE PARTICLES THAT ARE TOO SMALL. IT HAS A DELTA VFD PLC WITH FAULT MONITORING THAT CAN BE PROGRAMMED TO YOUR PRODUCT'S SPECIFICATION, WHICH IS ATTACHED TO AN EXTERNAL ELECTRIC CABINET. THE FINAL PRODUCT WILL HAVE INCREASED DENSITY AND FLOW, IDEAL FOR TABLETS, SNACKS, AND COSMETICS. THIS ROLLER COMPACTOR GRANULATION SYSTEM HAS INDEPENDENT SPEED CONTROL FOR THE SCREW-FEED HOPPER (THE RATE THAT POWDER IS FED INTO THE SERRATED ROLLS), THE SERRATED ROLLS (THE RATE THAT THE POWDER IS UNDER COMPRESSION AS IT'S TURNED INTO A RIBBON), AND THE 2-STAGE GRANULATOR, EFFECTIVELY IMPROVING THE FINAL PRODUCT'S QUALITY. THE MACHINE IS INTENDED FOR USE IN THE PHARMACEUTICAL, FOOD, AND CHEMICAL INDUSTRIES. FEATURES AND BENEFITS: THE ADVANTAGES OF DRY GRANULATION ARE INTERMEDIATE ADDITIVES ARE NOT NEEDED, IT INCREASES END PRODUCT DUST MANAGEMENT, INCREASES DENSITY AND FLOW, ENSURES THAT THE FINAL PRODUCT IS UNIFORM, AND SIGNIFICANTLY REDUCES THE WASTE OF POWDER IN MANUFACTURING. LASTLY, THE SUBSEQUENT PROCESSING THAT IS FACILITATED FOR THE STORAGE AND TRANSPORTATION OF THE FINAL PRODUCT IS CONVENIENT. THIS MACHINE COMES WITH A DIGITAL USER MANUAL. INSTALLED ITEMS IN THE SYSTEM: TABLETTING MOTOR YVF2 100L2-4-3KW 1PC SIEMENS FEEDING MOTOR YVF2 80L-50HZ-0.75KW 1PC SIEMENS GRANULATOR MOTOR YVF2 90L-6-0.75KW 1PC SIEMENS FREQUENCY CONVERTER VFD-B 3.7KW 1PC DELTA FREQUENCY CONVERTER VFD-B 1.5KW 2PCS DELTA 1X - NEW! GRANULATOR DUST COLLECTOR MANUFACTURER: SHANGHAI TIANFAN PHARMACEUTICAL POWER: 2.2(KW) MACHINE SIZE: 800 X 800 X 1800 MM WEIGHT: 200 (KG) FEATURES AND BENEFITS: THIS IS AN EFFICIENT AND HIGH-POWERED DUST MANAGEMENT SYSTEM USED TO FILTER DUST AND FINE PARTICLES FROM THE AIR (PRIMARILY BELOW THE GRANULATOR AND ABOVE THE VIBRATING SIFTER), LEAVING YOU WITH A CLEAN WORKING AREA AND A HIGH-QUALITY GRANULE TO ADD BACK TO YOUR PROCESS. THIS MACHINE INCLUDES AN ONBOARD AIR COMPRESSOR TO AUTOMATICALLY CLEAN THE INTERNAL DUST FILTRATION SYSTEM TO INCREASE THE OVERALL EFFICIENCY OF THE MACHINE. THIS MACHINE IS IN NEW CONDITION. 1X - USED VIBRATING SIFTER, CONTINUOUS MANUFACTURER: SHANGHAI TIANFAN PHARMACEUTICAL OUTPUT: 30-100 (KG) POWER: .2(KW) MACHINE SIZE:1200 X 600 X 550MM WEIGHT: 50 (KG) FEATURES AND BENEFITS: THIS IS AN IN-LINE CONTINUOUS VIBRATING SIFTER DESIGNED TO SEPARATE ANY FINE POWDER FROM THE DESIRED GRANULE. THE FINE POWDER CAN BE SEPARATED AND ADDED BACK TO THE ROLLER COMPACTOR. INCLUDES (1) VIBRATING SIFTER WITH (2) SIEVE SCREENS, (3) DISCHARGE PORTS FOR DIFFERENT GRANULE SIZES, AND ADJUSTABLE POWER OUTPUT. YOU CAN EASILY CUSTOMIZE THE MESH SIZE BY CHANGING OR ADDING A NEW SIEVE SCREEN. THIS MACHINE WAS ALSO OUTFITTED WITH A FREQUENCY CONVERTER TO ADJUST THE LEVEL OF VIBRATION, WHICH WAS PROVIDED BY ELITE ELECTRIC IN THE US AND INSTALLED INTO THE ELECTRIC CABINET. 1X - LIGHTLY USED VACUUM CONVEYOR FEATURES AND BENEFITS: VACUUM CONVEYORS ARE SUCTIONING MACHINES THAT UTILIZE AIR PRESSURE IN ORDER TO MOVE MATERIALS THROUGH AN ENCLOSED PIPELINE TO FILL THE SCREW-FEED HOPPER WITH POWDER. VACUUM CONVEYORS HAVE BROAD APPLICATIONS THROUGHOUT THE INDUSTRIAL AND MANUFACTURING WORLD, AND INCREASE THE OVERALL EASE-OF-USE DURING MANUFACTURING AS THE HOPPER IS AUTOMATICALLY FILLED. THIS UNIT WAS OUTFITTED WITH A LASER SENSOR TO AUTOMATICALLY DETECT WHEN IT NEEDS TO REFILL THE HOPPER WITH MORE POWDER, MINIMIZING THE AMOUNT OF LABOR REQUIRED TO OPERATE THE ROLLER COMPACTOR DRY GRANULATOR

HMC IMF 7-14 LIQUID POUCH MACHINE INCOMPLETE SUPPLY VOLTAGE: 240 VAC 3PH CONTROL VOLTAGE: 120 VAC 1PH CONTROL VOLTAGE: 24 VDC DICONNECT RATTING: 50 AMPS THE IMTE POUCHMASTER HORIZONTAL FORM FILL SEAL SERIES IS THE MOST ECONOMICAL LARGE FORMAT STANDUP ZIPPER POUCH MACHINE AVAILABLE TODAY. THIS SERIES IS SPECIALLY SUITED FOR SNACKS, TRAIL MIX, BEEF JERKY, DRIED FRUITS, POWDERED SUBSTANCES, AND LIQUIDS. SUPPORTING THE POUCH FROM BOTH SIDES THROUGH THE FILLING STATIONS, THE POUCHMASTER SUPPORTS 3 POUNDS OF PRODUCT. THE OPTIONAL HMC SERVO INDEXING SUPPORT CONVEYOR WILL SUPPORT UP TO 6 POUNDS OF PRODUCT. WHEN EQUIPPED WITH THE TRAVELING FUNNEL OPTION AND THE PRODUCT IS FREE FLOW, SPEEDS UP TO 30% FASTER ARE POSSIBLE. S/N: H2013366

HMC IM 7-14 LIQUID POUCH MACHINE INCOMPLETE SUPPLY VOLTAGE: 480 VAC 3 PH CONTROL VOLTAGE: 120 VAC 1PH DISCONNECT RATING 25 AMPS THE IM POUCHMASTER HORIZONTAL FORM FILL SEAL SERIES PROVIDES HIGH SPEED FILLING OF ALL PRODUCTS, INCLUDING POWDERS AND LIQUIDS IN THE MOST FLEXIBLE MACHINE DESIGN AVAILABLE ON THE MARKET TODAY. SPEEDS UP TO 100 PPM (1-UP) ARE FREQUENTLY OBSERVED WITH MANY PRODUCTS. WHEN FITTED WITH AN HMC ON OR OFF LINE SLITTER, SPEEDS UP TO 270 PPM MAY BE ACHIEVED. S/N: RH2011320

PTK PR3000 DOUBLE SIDED ROTARY TABLET PRESS S/N: R - 1033 VOLTS: 460 HERTZ: 60 AMPS: 18 OPERATION AIR PRESSURE: 6 BAR OVERALL DIMENSIONS: 65"L X 65"W X 87"H WEIGHT: 6000LBS CONTROL PANEL: MODEL: PR3000 SERIAL NUMBER: R - 1033 VOLTS: 460 WEIGHT: 120KG PRODUCT DESCRIPTION: THE PTK ROTARY TABLET PRESS MODEL, PR-3000 IS DESIGNED ESPECIALLY FOR SYMMETRY, WITH ITS SPACE SAVING OCTAGON SHAPE. COMPOSED OF A RIGID FRAME WITH SMART INTERIOR IT IS TOTALLY ACCESSIBLE FOR EASE OF CLEANING AND MAINTENANCE. IN ADDITION TO THIS, THE CONTROL SCREEN IS SELF CONTAINED AND ACCESSIBLE. THE PR-3000 GUARANTEES A PLENTIFUL OUTPUT AND IS DESIGNED TO PRODUCE TABLETS IN AN EFFICIENT DOUBLE SIDED CONFIGURATION. PRODUCT SPECIFICATIONS: TOOLING: B (CAN BE SET TO D) NUMBER OF STATIONS: 52 MAX MAIN COMPRESSION [KN]: 100 MAX PRE COMPRESSION [KN]: 100 MAX OUTPUT (TABS/HR): 436,800 MAX FILLING DEPTH(MM): 18 MAX TABLET THICKNESS(MM): 8.5 UPPER PUNCH INSERTION(MM): 1-4 PITCH CIRCLE DIAMETER(MM): 615 TURRET SPEED(RPM): 5-70 MAX TABLET DIAMETER (ROUND)(MM): 16 NOTES FROM PREVIOUS OWNER: MACHINE WILL ONLY READ IN KG. NEEDS TO BE PROGRAMMED TO READ IN TONNAGE. TABLET PRESS IS SET TO B TOOLING, IS EQUIPPED TO ACCEPT INTERCHANGEABLE TURRETS EITHER B OR D NO PRINTER INCLUDED. POWER CABLE HAS BEEN CUT. BACK RIGHT ROLLER NEEDS WORK

2004 IMA IMPRESSA IMP 130 ENCAPSULATION MACHINE MACHINE NUMBER: PC1009 CAPACITY: 126000 U/H CAN DO CAPSULE SIZES ANYWHERE FROM 000-5 TOOLING WITH MACHINE: 0, 0L, 00 THE IMPRESSA CAPSULE FILLER IS ABLE TO DOSE POWDERS, PELLETS AND LIQUIDS INTO THE HARD GELATINE CAPSULES. THE MACHINE FEATURE AN INNOVATIVE TAMPING PIN POWDER DOSING UNIT AND A VOLUMETRIC PELLET AND LIQUID DOSING UNITS, GUARANTEEING HIGH PERFORMANCES IN TERMS OF SPEED AND DOSING PRECISION. THE IMPRESSA CAPSULE FILLER IS ABLE TO DOSE POWDERS, PELLETS AND LIQUIDS INTO THE HARD GELATIN CAPSULES. THE MACHINE FEATURE AN INNOVATIVE TAMPING PIN POWDER DOSING UNIT AND A VOLUMETRIC PELLET AND LIQUID DOSING UNITS, GUARANTEEING HIGH PERFORMANCES IN TERMS OF SPEED AND DOSING PRECISION. MAIN CHARACTERISTICS POSSIBILITY OF SEPARATELY ADJUSTING THE MACHINE WORKING PARAMETERS ALLOWING EXCELLENT RESULTS WITH THE MOST DIVERSE PRODUCTS. THE WORKING AREA HAS BEEN COMPLETELY ISOLATED FROM THE MECHANICAL AREA, THUS PREVENTING THE POWDER FROM PASSING TO THE LOWER PART OF THE MACHINE. THIS FEATURE, TOGETHER WITH THE CENTRALIZED LUBRICATION SYSTEM, REDUCES MAINTENANCE OPERATIONS AND GUARANTEES LONGER MACHINE LIFE. THE MACHINE CAN BE FITTED WITH 100% IN-LINE INDIRECT CONTROL OF NET WEIGHT BY MEASURING COMPRESSION FORCE.

PULVERIZER WFX- 40B SHANGHAI MACHINERY PULVERIZER WFX- 40 B OUTPUT (KG/H): 100 - 500 KG/H RPM: 3400 MAX FEEDING SIZ OF MATERIAL: 12MM CRUSHING FINESS: 60- 120 MESH CRUSHING MOTOR: 12KW DUST COLLECTOR MOTOR: 2.2KW SERIAL NUMBER: SDM 1347- 01 VOLTS: 220 PHASE: 3