Cookie Donut and Bakery Equipment Auction From a Major Manufacturer Featuring Mixers Makeup Lines and More
Category: FOOD PROCESSING AND RESTAURANT EQUIPMENT
Total Lots:
394
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
HOBART | B-20 |
HOBART B-20 PLANETARY MIXER WITH: BOWL CAPACITY: 20 LITERS VARIABLE MIXING SPEEDS: LOW: 100 RPM MEDIUM: 180 RPM HIGH: 400 RPM OVERALL DIMENSIONS: LENGTH: 19.3 INCHES WIDTH: 16.5 INCHES HEIGHT: 30.7 INCHES ELECTRICAL: 220 VOLTS, 50 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
(2) COMPRESSOR UNITS - USED COMPRESSOR UNITS WITH: OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT: 35 INCHES SKIDDING, REMOVAL AND SIMPLE LOADING
|
🔒 Subscribe | |||
|
|
1970 | RIETZ | RS-28 |
1970 RIETZ RS-28 DUAL SHAFT RIBBON BLENDER WITH: TWIN SHAFT, SINGLE RIBBON BLENDER CAPACITY TO TOP OF RIBBON: 4,000 LBS OPEN TOP WITH TOP MOUNTED SAFETY GRATE MIX CHAMBER DIMENSIONS: LENGTH: 96 INCHES WIDTH: 56 INCHES DEPTH: 42 INCHES (2) 20 HORSEPOWER MOTORS DUAL PNEUMATIC GATE DISCHARGES DISCHARGE HEIGHT: 41 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 3 PH, 60 HZ
|
🔒 Subscribe |
|
|
PILLAR | MK-20 |
PILLAR MK-20 20KW INDUCTION HEATER WITH: POWER RANGE: 2.5 KW - 20 KW FREQUENCY: 50 KHZ - 450 KHZ MOFSET TRANSISTOR MODULES 95% CONVERSION EFFICIENCY SINGLE MAIN CONTROL BOARD 95 DEGREE MAX INLET WATER TEMPERATURE 30 PSI MINIMUM DIFFERENTIAL WATER PRESSURE ELECTRICAL: 208 VOLTS, 3 PHASE, 50/60 HERTZ
|
🔒 Subscribe | |
|
|
ACCUTEK | DOMINO A100 |
ACCUTEK DOMINO A100 INKJET PRINTER - USED ACCUTEK INKJECT PRINTER WITH: AUTOMATIC VISCOSITY CONTROL AUTOMATIC INK BLEED CONTROL 825 MILLIMETER CARTRIDGE WITH AUTOMATIC METER CHARACTER WIDTH AND HEIGHT ADJUSTMENT AUTO REPEAT/INVERSE/REVERSE ELECTRICAL: 110 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
SPOONER VICARS PEERLESS | 2100 |
PEERLESS 2100 POUND SIGMA BLADE MIXER APPROXIMATE CAPACITY: 2,100 POUNDS APPROXIMATE MIXING BOWL CAPACITY: 380 GALLONS DIMENSIONS: 53 INCHES WIDE X 36 INCHES TALL X 48 INCHES DEEP WATER JACKET FACILITY TUB LOCKING AND BUMPER SYSTEM TILTING MIXING BOWL TOP MOUNTED INFEEDS: 10 INCH DIAMETER 10 INCH DIAMETER 4 INCH DIAMETER 4.75 INCH DIAMETER WITH PNEUMATIC GATE VALVE 5.75 INCH DIAMETER WITH PNEUMATIC GATE VALVE 15.5 INCHES X 21 INCHES WITH PNEUMATIC GATE VALVE MIXING DRIVE MOTOR SPECIFICATIONS: VOLTS: 460 HERTZ: 60 PHASE: 3 EXTENSIVELY FOR THE PRODUCTION OF POTATO SNACK, CRACKERS, HARD BISCUITS AND PET FOOD & BISCUIT DOUGH.
|
🔒 Subscribe | |
|
|
OSHIKIRI | DKM 6 POCKET |
OSHIKIRI DKM 6 POCKET DOUGH DIVIDER - USED OSHIKIRI DKM DOUGH DIVIDER WITH: OUTPUT: 3,600 TO 9,000 PIECES PER HOUR SCALING WEIGHT RANGE: 8 OUNCES TO 37 OUNCES STROKES PER HOUR: 10 - 25 STEPLESS VARIABLE 6 POCKETS STAINLESS STEEL CONSTRUCTION VOLTAGE460 ELECTRICAL PHASE3PH HERTZ60HZ AMPERAGE11
|
🔒 Subscribe | |
|
|
2011 | LEMATIC | GU9W-5-8 |
2011 LEMATIC GU9W-5-8 HARD ROLL SLICER S/N: 36631111 OUTPUT: 800 PIECES PER MINUTE (BASED ON 4" ROUND ROLL), DEPENDING ON PRODUCT AND APPLICATION OUTPUT: 48,000 HARD ROLLS PER HOUR SIMULTANEOUSLY SLICES SIX HEARTH-STYLE SANDWICH ROLLS LAST RUNNING: 4 LANES OF BUNS, EACH 4.25 INCH DIAMETER BELT WIDTH: 34 INCHES FRAME WIDTH: 42 INCHES # OF KNIFE SPINDLES: 5 KNIFE DIAMETER: 6 INCHES LANE WIDTH: 4.25 INCHES HINGE OR WEB SLICING CAPABILITY SPREAD CONVEYOR VARIABLE SPEED DRIVE FLOATING TOP CONVEYOR ADJUSTABLE SLICING HEIGHT, SLICING DEPTH, AND TOP CONVEYOR HOLD DOWN AIR REQUIREMENTS: NONE
|
🔒 Subscribe |
|
|
URSCHEL | COMITROL 1700 |
URSCHEL COMITROL 1700 15 HORSEPOWER PROCESSOR - USED URSCHEL COMITROL 1700 CENTRIFUGAL SLICER WITH: APPLICATION: USED TO BREAKDOWN FOOD PRODUCTS TO CREATE A MULTITUDE OF PRODUCTS, SUCH AS: NUT BUTTERS, PASTES AND EXTRUDED PRODUCTS, BISCUITS AND COOKIES, NUTS, FRUIT PULP, VARIOUS SPICES, CORN MASA, HARD CHEESES, AND A VARIETY OF GELS, OINTMENTS, AND CREAMS MAXIMUM INPUT PRODUCT, IN GENERAL, SHOULD NOT EXCEED 2.5 INCHES FOR 3 INCH CUTTING HEADS, 3/8 INCHES TO A SLURRY FOR MICROCUT HEADS, AND 1/4 TO 1/2 INCHES IN ANY DIMENSION FOR SLICING HEADS DIFFERENT PRODUCT SLICING DIMENSIONS MAY REQUIRE OEM CHANGE PARTS CURRENTLY FITTED WITH A SLICING HEAD 15 HORSEPOWER MOTOR SEALED ENCLOSURE CONTINUOUS OPERATION FOR UNINTERRUPTED PRODUCTION SIMPLIFIED DESIGN FOR EASY CLEANING AND MAINTENANCE INFEED HEIGHT: 7 FEET DISCHARGE HEIGHT: 32 INCHES INFEED DIMENSIONS: 9 INCHES WIDE X 3.75 INCHES TALL STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
CROWN | DMT-40 |
CROWN DMT-40 DIRECT STEAM TILTING KETTLE WITH: CAPACITY: 40 GALLONS STAINLESS STEEL CABINET M.D.M.T. 32 DEGREES FAHRENHEIT AT 35 PSI 316 STAINLESS STEEL LINER 6 INCH ADJUSTABLE HOLD DOWN FEET ONE PIECE COVER 2 INCH TANGENT DRAW OFF VALVE STEAM CONTROL VALVE AND STEAM TRAP SWING DRAIN HOT AND COLD DECK MOUNT FAUCET HYDRAULIC TILT PAN CARRIER VOLTAGE: 115 ELECTRICAL PHASE: 1PH HERTZ: 60HZ
|
🔒 Subscribe | |
|
|
TEKKRA | T-220-40 |
TEKKRA T-220-40 INTERMITTENT MOTION RIGHT ANGLE INFEED CLEAR FILM BUNDLER WITH: THE INTERMITTENT MOTION TEKKRA 200 CONTAINS AND ASSISTS PRODUCT THROUGH THE ENTIRE SHRINK WRAP PROCESS, SO IT IS PERFECT FOR TAKING UNSUPPORTED PRODUCT (NOT IN A TRAY OR ON A PAD) AND TURNING IT INTO A MULTIPACK. PLUS, THE TEKKRA 200'S UNIQUE TUNNEL DISCHARGE COOLING STATION, QUICKLY COOLS FILM TO PRESERVE PRODUCT INTEGRITY. CLEAR FILM OUTPUT: UP TO 25 BUNDLES PER MINUTE DEPENDING ON PACK PATTERN AND CASE SIZE PRODUCT TYPES: BOTTLES, CANS, CARTONS, TUBS, OR PAILS HEAT TUNNEL LENGTH: 45 INCHES LONG WORKING APERTURE: 14 INCHES TALL X 25 INCHES WIDE DISCAHRGE CONVEYOR: 20 INCHES WIDE X 40 INCHES LONG CLOSURE STYLE: BULL'S EYE, SIDE TACK, OR SIDE SEAL AND TRIM DISPLAY: 7 INCH COLOR TOUCHSCREEN HEAVY DUTY WELDED TUBULAR STEEL ELECTRICALS: 480 VOLTS / 3 PHASE / 60 HERTZ / 80 AMPS AIR REQUIREMENTS: 80 PSI @ 16 CFM
|
🔒 Subscribe | |
|
|
USED STORAGE CABINET WITH: OVERALL DIMENSIONS: WIDTH: 36 INCHES DEPTH 24 INCHES HEIGHT: 78 INCHES
|
🔒 Subscribe | |||
|
|
(2) SHELVING UNITS - SHELF 1: 48" WIDTH X 24" DEPTH X 83" HEIGHT SHELF 2: 48" WIDTH X 19" DEPTH X 73" HEIGHT DOES NOT INCLUDE CONTENTS OF SHELF
|
🔒 Subscribe | |||
|
|
ULINE |
ULINE STAINLESS STEEL SHELVES WITH: STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 19 INCHES WIDTH: 49 INCHES HEIGHT: 73 INCHES CONTENTS NOT INCLUDED
|
🔒 Subscribe | ||
|
|
ULINE |
ULINE STAINLESS STEEL SHELVES WITH: STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 19 INCHES WIDTH: 49 INCHES HEIGHT: 73 INCHES CONTENTS NOT INCLUDED
|
🔒 Subscribe | ||
|
|
(3) SECTIONS OF PALLET RACKING WITH; SECTION 1: 101 INCHES WIDTH X 42" DEPTH X 93" HEIGHT SECTION 2: 202 INCHES WIDTH X 42" DEPTH X 93" HEIGHT SECTION 3: 101 INCHES WIDTH X 42" DEPTH X 93" HEIGHT
|
🔒 Subscribe | |||
|
|
TECH FOR FOOD | ROLL IT |
TECH FOR FOOD ROLL IT FOOD ROLLER WITH: THE ROLLING AND WRAPPING MACHINE CAN BE OPERATED IN THE BASIC FUNCTIONS OF ROLLING, WRAPPING, ROLLING OF FILLED SLICES AND FOLDING. PRODUCITON SPEED: UP TO 100 CENTIMETERS A SECOND 50 CYCLES PER MINUTE PRODUCT DIMENSIONS: USABLE ROLL WIDTH: 420 MILLIMETERS USABLE ROLL DIAMETER: 8-73 MILLIMETERS ROLLING PERFORMANCE: 1 TRACK UP TO 50 ROLLS PER MINUTE 2 TRACKS UP TO 100 ROLLS PER MINUTE 4 TRACKS UP TO 200 ROLLS/MIN INFEED HEIGHT: 42 INCHES (APPROXIMATELY) TOUCH SCREEN CONTROLS MOUNTED ON STAINLESS STEEL LEGS STAINLESS STEEL CONTRUCTION ELECTRICAL: 230 VOLTS, 50/60 HERTZ, 3 PHASE, 13 AMPS
|
🔒 Subscribe | |
|
|
2000 | FEDCO | CCE24CO |
2000 FEDCO CCE24CO 24" W CHOCOLATE ENROBER WITH: INFEED/OUTFEED HEIGHT FROM FLOOR: 37.5 INCHES CONVEYOR TOTAL DIMENSIONS (INCHES): 72 LONG X 18 WIDE OUTFEED CONVEYOR DIMENSIONS (INCHES): 53 LONG X 18 WIDE INFEED CONVEYOR DIMENSIONS (INCHES): 18 LONG X 18 WIDE RE-CIRCULATION TUBE DIAMETER: 3 INCHES/4.5 INCHES STAINLESS STEEL FOOD GRADE
|
🔒 Subscribe |
|
|
(4) SIX TIER SHELVING UNIT WITH: OVERALL DIMENSIONS FOR EACH SHELF: LENGTH: 49 INCHES WIDTH: 18 INCHES HEIGHT: 75 INCHES CONTENTS NOT INCLUDED
|
🔒 Subscribe | |||
|
|
PLASTIC TOTES WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC CONSTRUCTION MOUNTED ON SWIVEL CASTERS PREVIOUSLY USED IN BAKERY FACILITY
|
🔒 Subscribe | |||
|
|
VIPER |
VIPER FLOOR WAXER WITH: SCRUBBING PATH: 20 INCHES ROTATIONS PER MINUTE: 175 MOTOR: 1.5 HORSEPOWER ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 18 INCHES WIDTH: 20 INCHES HEIGHT: 46 INCHES
|
🔒 Subscribe | ||
|
|
GARBAGE CANS WITH TRASH CAN DOLLYS - USED GARBAGE CANS WITH TOTE OF TRASH CAN DOLLYS WITH: PLASTIC TOTE WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC CONSTRUCTION MOUNTED ON SWIVEL CASTERS OAD OF CANS: 22 X 22 X 32 TOTE FULL OF TRASH CAN DOLLYS PREVIOUSLY USED IN BAKERY FACILITY
|
🔒 Subscribe | |||
|
|
PLASTIC TOTES WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC CONSTRUCTION MOUNTED ON SWIVEL CASTERS PREVIOUSLY USED IN BAKERY FACILITY
|
🔒 Subscribe | |||
|
|
PLASTIC TOTES WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC CONSTRUCTION MOUNTED ON SWIVEL CASTERS PREVIOUSLY USED IN BAKERY FACILITY
|
🔒 Subscribe | |||
|
|
PLASTIC TOTES WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC CONSTRUCTION MOUNTED ON SWIVEL CASTERS PREVIOUSLY USED IN BAKERY FACILITY
|
🔒 Subscribe | |||
|
|
9' BY 20" ACCORDION STYLE SKATE CONVEYOR - USED SKATE CONVEYOR WITH: CONVEYOR EXTENDED DIMENSIONS: LENGTH: 9 FEET WIDTH: 20 INCHES CONVEYOR CLOSED DIMENSIONS: LENGTH: 3 FEET WIDTH: 20 INCHES INFEED HEIGHT: 30 INCHES LENGTH BETWEEN SKATES: 3 INCHES MOUNTED ON CASTERS
|
🔒 Subscribe | |||
|
|
AUTOMATED CONVEYOR SYSTEMS |
AUTOMATED CONVEYOR SYSTEMS ROLLER CONVEYOR WITH: CONVEYOR LENGTH: 120 INCHES (10 FEET) OVERALL DIMENSIONS (INCHES): LENGTH: 120 WIDTH: 16 HEIGHT: 36 ROLLER WIDTH: 12.5 INCHES INFEED HEIGHT: 35 INCHES DISCHARGE HEIGHT: 35 INCHES MISSING MULTIPLE ROLLERS
|
🔒 Subscribe | ||
|
|
AUTOMATED CONVEYOR SYSTEMS (ACS) |
AUTOMATED CONVEYOR SYSTEMS ROLLER CONVEYOR WITH: CONVEYOR LENGTH: 120 INCHES (10 FEET) ROLLER WIDTH: 12.5 INCHES INFEED HEIGHT: 35 INCHES DISCHARGE HEIGHT: 35 INCHES OVERALL DIMENSIONS (INCHES): LENGTH: 120 WIDTH: 16 HEIGHT: 36 MISSING MULTIPLE ROLLERS
|
🔒 Subscribe | ||
|
|
ROLLING PLASTIC WASTE BIN WITH: CASTERS OVERALL DIMENSIONS: LENGTH: 73 INCHES WIDTH: 34 INCHES HEIGHT: 50 INCHES
|
🔒 Subscribe | |||
|
|
FOUR TIER SHELVES - USED STAINLESS STEEL FOUR TIER SHELF WITH: OVERALL DIMENSIONS: LENGTH: 18 INCHES WIDTH: 36 INCHES HEIGHT: 72 INCHES STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
AUTOMATED CONVEYOR SYSTEMS (ACS) |
AUTOMATED CONVEYOR SYSTEMS SMOOTH TOP CONVEYOR WITH: BELT DIMENSIONS (INCHES): LENGTH: 114 WIDTH: 11.5 OVERALL DIMENSIONS (INCHES): LENGTH: 115 WIDTH: 24 HEIGHT: 38
|
🔒 Subscribe | ||
|
|
2016 | PEARSON | CE60-TL |
2016 PEARSON CE60-TL CASE ERECTOR AND BOTTOM GLUE SEALER - USED CASE ERECTOR AND BOTTOM GLUE SEALER WITH: OUTPUT RATE: UP TO 55 CASES PER MINUTE ERECTED CASE SIZE RANGE: LENGTH: 12 INCHES TO 23 INCHES WIDTH: 5.5 INCHES TO 16 INCHES OPEN DEPTH: 5.5 INCHES TO 22.5 INCHES KNOCKED-DOWN SIZES: LENGTH: 17.5 INCHES TO 36 INCHES WIDTH: 8.25 INCHES TO 30.5 INCHES BOTTOM FLAP WIDTH: 3 INCHES TO 8 INCHES CHAIN DRIVEN BELT INFEED WIDTH: 4.5 INCHES HOT MELT GLUE UNIT ALLEN-BRADLEY PLC ELECTRICAL: 460 VOLTS, 3 PH, 60 HZ RIGHT HAND CASE MACHINE
|
🔒 Subscribe |
|
|
BELT INCLINE CONVEYOR 117" L X 11.5" W - USED BELT INCLINE CONVEYOR WITH: BELT DIMENSIONS LENGTH: 117 INCHES WIDTH: 11.5 INCHES INFEED HEIGHT: 11.5 INCHES DISCHARGE HEIGHT: 59.5 INCHES MOUNTED ON (4) CASTERS STAINLESS STEEL CONSTRUCTION MOTOR SPECIFICATIONS: HORSEPOWER: 0.5 RPM: 1725 ELECTRICAL: 230/460 VOLTS, 60 HZ, 3 PHASE
|
🔒 Subscribe | |||
|
|
BARTELT |
BARTELT HORIZONTAL FORM FILL AND SEAL WITH: PRODUCTION OUTPUT RATE: UP TO 70 POUCHES PER MINUTE PACKAGE WIDTH: 6 INCHES 14 STATIONS FILM ROLL LENGTH: 12 INCHES FILM ROLL DIAMETER: 1 INCH SEAL JAW LENGTH: 9 INCHES STAINLESS STEEL COMPONENTS MILD STEEL FRAME ELECTRICAL REQUIREMENTS: 230/480 VOLTS, 60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 221 INCHES WIDTH: 54 INCHES HEIGHT: 91 INCHES
|
🔒 Subscribe | ||
|
|
TRIANGLE | L 6P |
TRIANGLE L 6P VERTICAL FORM FILL AND SEAL BAGGER WITH: FILM ROLL DIAMETER: 1.5 INCHES SEAL JAW LENGTH: 9.5 INCHES PUSH BUTTON CONTROLS MILD STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 53 INCHES WIDTH: 57 INCHES HEIGHT: 70 INCHES
|
🔒 Subscribe | |
|
|
70-INCH LONG SMOOTH TOP CONVEYOR - USED 70-INCH SMOOTH TOP CONVEYOR WITH: OVERALL DIMENSIONS (INCHES): LENGTH: 70 WIDTH: 23 HEIGHT: 42 BELT WIDTH: 14.5 INCHES INFEED HEIGHT: 32 INCHES DISCHARGE HEIGHT: 39 INCHES NO BELT INCLUDED
|
🔒 Subscribe | |||
|
|
AUTOMATED CONVEYOR SYSTEMS (ACS) |
AUTOMATED CONVEYOR SYSTEMS CORNER ROLLER CONVEYOR WITH: ROLLER WIDTH: 12.5 INCHES CONVEYOR LENGTH: 84 INCHES OVERALL DIMENSIONS (INCHES): LENGTH: 74 WIDTH: 17 HEIGHT: 11
|
🔒 Subscribe | ||
|
|
GORING KERR | TEKTAMET 211 |
GORING KERR TEKTAMET 211 METAL DETECTOR WITH: WORKING APERTURE: WIDTH: 4.5 INCHES HEIGHT: 9.75 INCHES CONVEYOR DIMENSIONS: LENGTH: 48 INCHES WIDTH: 4.5 INCHES HEIGHT: 36 INCHES GUIDE RAIL HEIGHT: 2 INCHES CONVEYOR TYPE: PLASTIC TABLE TOP MOUNTED ON 4 STAINLESS STEEL LEGS
|
🔒 Subscribe | |
|
|
ROTARY ACCUMULATION TABLE-38 |
ROTARY ACCUMULATION TABLE-38 - USED ROTARY ACCUMULATION TABLE WITH: DIAMETER: 38 INCHES GUARD RAIL HEIGHT: 2.25 INCHES MAX HEIGHT FROM TABLE TO TOP OF GUARD RAILS: 4 INCHES WORKING HEIGHT: 43.25 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 480 VOLTS 60 HZ THREE PHASE .93 AMP
|
🔒 Subscribe | ||
|
|
TRIANGLE | L 60 |
USED TRIANGLE L 60 VERTICAL FORM FILL AND SEAL BAGGER WITH: FILM ROLL DIAMETER: 1.5 INCHES SEAL JAW LENGTH: 9.5 INCHES PUSH BUTTON CONTROLS MILD STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 53 INCHES WIDTH: 57 INCHES HEIGHT: 70 INCHES
|
🔒 Subscribe | |
|
|
CLEATED INCLINE CONVEYOR WITH SS PRODUCT HOPPER - USED CONVEYOR WITH: INPUT HEIGHT: 73 INCHES CLEATED BELT: CLEAT CENTERS: 14 INCHES CLEAT HEIGHT: 1 INCH BELT WIDTH: 18 INCHES DISCHARGE HEIGHT: 63 INCHES PRODUCT HOPPER: STAINLESS STEEL WIDTH: 23 INCHES REAR DISCHARGE GATE WASHDOWN CAPABLE STAINLESS STEEL FRAME MOUNTED ON LEVELING FEET
|
🔒 Subscribe | |||
|
|
MTC | H-LE-S3 |
MTC H-LE-S3 COMBO DUMP AND PALLET SEPARATOR WITH: WEIGHT CAPACITY: 3000 POUNDS OVERALL DIMENSIONS: LENGTH: 50 INCHES WIDTH: 50 INCHES HEIGHT: 104 INCHES
|
🔒 Subscribe | |
|
|
VIDEOJET | 37 PLUS |
VIDEOJET 37 PLUS WITH: OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT: 82 INCHES
|
🔒 Subscribe | |
|
|
USED REFRIGERATION UNIT WITH: OVERALL DIMENSIONS: LENGTH: 145 INCHES WIDTH: 96 INCHES HEIGHT: 80 INCHES
|
🔒 Subscribe | |||
|
|
CARDWELL | VC1659 |
CARDWELL VC1659 VIBRATORY CONVEYOR WITH: SHAKING TABLE DIMENSIONS: LENGTH: 180 INCHES WIDTH: 17.5 INCHES INFEED HEIGHT: 26 INCHES ELECTRICS: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3 STAINLESS STEEL
|
🔒 Subscribe | |
|
|
RO TUBE SYSTEM - USED RO TUBE WITH: LENGTH: 172 INCHES DIAMETER: 8 INCHES STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
TEXWRAP | TLS-2219MP |
TEXWRAP TLS-2219MP INTERMITTENT MOTION L-SEAL SYSTEM - USED TEXWRAP TLS-2219 L-BAR WRAPPER WITH: MAXIMUM PACKAGE SIZE: 9H X 15.5W X 19L (STANDARD) 7H X 15.5W X 19L (WITH CLOSING CONVEYOR OPTION) MINIMUM PACKAGE SIZE: 4L X 2.75 W (STANDARD) 2L X 2.75 W (WITH CLOSING CONVEYOR OPTION) FILM WIDTH: MAXIMUM: 28 CENTER FOLDED MINIMUM: 6 CENTER FOLDED OPTIONAL 64 FOLDER ATTACHMENT WITH 32 UNWIND CONVEYOR SPEED: 20 TO 100 FEET PER MINUTE AIR REQUIREMENTS: 80 PSI, 4 CFM CONSTRUCTION: HEAVY-DUTY WELDED TUBULAR STEEL STANDARD (CORROSION RESISTANT OPTIONAL) ELECTRICAL REQUIREMENTS: 240 VAC, 1-PHASE (480 VAC OPTIONAL)
|
🔒 Subscribe | |
|
|
CONVEYOR BELT: BELT WIDTH: 30 INCHES. DUNNAGE RACK DIMENSIONS (INCHES): LENGTH: 60 INCHES WIDTH: 30 HEIGHT: 12
|
🔒 Subscribe | |||
|
|
AUTOMATED CONVEYOR SYSTEMS (ACS) |
AUTOMATED CONVEYOR SYSTEMS 70" L BY 12" W CASE BELT CONVEYOR W/ VARIABLE SPEED C - USED CASE BELT CONVEYOR WITH: MANUFACTURER: AUTOMATED CONVEYOR SYSTEMS (ACS) BELT DIMENSIONS (INCHES): LENGTH: 70 WIDTH: 12 INFEED / DISCHARGE HEIGHT: 40 INCHES OVERALL DIMENSIONS (INCHES): LENGTH: 72 WIDTH: 25 HEIGHT: 40 VARIABLE SPEED CONTROL MOTOR
|
🔒 Subscribe | ||
|
|
AUTOMATED CONVEYOR SYSTEMS (ACS) |
72-INCH ROLLER CONVEYOR WITH: OVERALL DIMENSIONS (INCHES): LENGTH: 72 WIDTH: 20 HEIGHT: 50 CONVEYOR LENGTH: 72 INCHES ROLLER WIDTH: 13 INCHES INFEED HEIGHT: 33 INCHES DISCHARGE HEIGHT: 28 INCHES
|
🔒 Subscribe |
HOBART B-20
FOOD PROCESSING AND RESTAURANT EQUIPMENT
HOBART B-20 PLANETARY MIXER WITH: BOWL CAPACITY: 20 LITERS VARIABLE MIXING SPEEDS: LOW: 100 RPM MEDI...
Hammer Price:
🔒
AIR COMPRESSORS
(2) COMPRESSOR UNITS - USED COMPRESSOR UNITS WITH: OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 I...
Hammer Price:
🔒
1970 RIETZ RS-28
FOOD PROCESSING AND RESTAURANT EQUIPMENT
1970 RIETZ RS-28 DUAL SHAFT RIBBON BLENDER WITH: TWIN SHAFT, SINGLE RIBBON BLENDER CAPACITY TO TOP O...
Hammer Price:
🔒
PILLAR MK-20
MISC
PILLAR MK-20 20KW INDUCTION HEATER WITH: POWER RANGE: 2.5 KW - 20 KW FREQUENCY: 50 KHZ - 450 KHZ MOF...
Hammer Price:
🔒
ACCUTEK DOMINO A100
COMMERCIAL PRINTING & BINDERY EQUIPMENT
ACCUTEK DOMINO A100 INKJET PRINTER - USED ACCUTEK INKJECT PRINTER WITH: AUTOMATIC VISCOSITY CONTROL ...
Hammer Price:
🔒
SPOONER VICARS PEERLESS 2100
FOOD PROCESSING AND RESTAURANT EQUIPMENT
PEERLESS 2100 POUND SIGMA BLADE MIXER APPROXIMATE CAPACITY: 2,100 POUNDS APPROXIMATE MIXING BOWL CAP...
Hammer Price:
🔒
OSHIKIRI DKM 6 POCKET
FOOD PROCESSING AND RESTAURANT EQUIPMENT
OSHIKIRI DKM 6 POCKET DOUGH DIVIDER - USED OSHIKIRI DKM DOUGH DIVIDER WITH: OUTPUT: 3,600 TO 9,000 P...
Hammer Price:
🔒
2011 LEMATIC GU9W-5-8
FOOD PROCESSING AND RESTAURANT EQUIPMENT
2011 LEMATIC GU9W-5-8 HARD ROLL SLICER S/N: 36631111 OUTPUT: 800 PIECES PER MINUTE (BASED ON 4" ROUN...
Hammer Price:
🔒
URSCHEL COMITROL 1700
FOOD PROCESSING AND RESTAURANT EQUIPMENT
URSCHEL COMITROL 1700 15 HORSEPOWER PROCESSOR - USED URSCHEL COMITROL 1700 CENTRIFUGAL SLICER WITH: ...
Hammer Price:
🔒
CROWN DMT-40
FOOD PROCESSING AND RESTAURANT EQUIPMENT
CROWN DMT-40 DIRECT STEAM TILTING KETTLE WITH: CAPACITY: 40 GALLONS STAINLESS STEEL CABINET M.D.M.T....
Hammer Price:
🔒
TEKKRA T-220-40
PACKAGING EQUIPMENT
TEKKRA T-220-40 INTERMITTENT MOTION RIGHT ANGLE INFEED CLEAR FILM BUNDLER WITH: THE INTERMITTENT MOT...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
USED STORAGE CABINET WITH: OVERALL DIMENSIONS: WIDTH: 36 INCHES DEPTH 24 INCHES HEIGHT: 78 INCHES...
Hammer Price:
🔒
MISC
(2) SHELVING UNITS - SHELF 1: 48" WIDTH X 24" DEPTH X 83" HEIGHT SHELF 2: 48" WIDTH X 19" DEPTH X 73...
Hammer Price:
🔒
ULINE
MISC
ULINE STAINLESS STEEL SHELVES WITH: STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 19 INCH...
Hammer Price:
🔒
ULINE
MISC
ULINE STAINLESS STEEL SHELVES WITH: STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 19 INCH...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
(3) SECTIONS OF PALLET RACKING WITH; SECTION 1: 101 INCHES WIDTH X 42" DEPTH X 93" HEIGHT SECTION 2:...
Hammer Price:
🔒
TECH FOR FOOD ROLL IT
FOOD PROCESSING AND RESTAURANT EQUIPMENT
TECH FOR FOOD ROLL IT FOOD ROLLER WITH: THE ROLLING AND WRAPPING MACHINE CAN BE OPERATED IN THE BASI...
Hammer Price:
🔒
2000 FEDCO CCE24CO
FOOD PROCESSING AND RESTAURANT EQUIPMENT
2000 FEDCO CCE24CO 24" W CHOCOLATE ENROBER WITH: INFEED/OUTFEED HEIGHT FROM FLOOR: 37.5 INCHES CONVE...
Hammer Price:
🔒
MISC
(4) SIX TIER SHELVING UNIT WITH: OVERALL DIMENSIONS FOR EACH SHELF: LENGTH: 49 INCHES WIDTH: 18 INCH...
Hammer Price:
🔒
MISC
PLASTIC TOTES WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC...
Hammer Price:
🔒
VIPER
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
VIPER FLOOR WAXER WITH: SCRUBBING PATH: 20 INCHES ROTATIONS PER MINUTE: 175 MOTOR: 1.5 HORSEPOWER EL...
Hammer Price:
🔒
MISC
GARBAGE CANS WITH TRASH CAN DOLLYS - USED GARBAGE CANS WITH TOTE OF TRASH CAN DOLLYS WITH: PLASTIC T...
Hammer Price:
🔒
MISC
PLASTIC TOTES WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC...
Hammer Price:
🔒
MISC
PLASTIC TOTES WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC...
Hammer Price:
🔒
MISC
PLASTIC TOTES WITH: OVERALL DIMENSIONS: LENGTH: 46 INCHES WIDTH: 34 INCHES HEIGHT: 36 INCHES PLASTIC...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
9' BY 20" ACCORDION STYLE SKATE CONVEYOR - USED SKATE CONVEYOR WITH: CONVEYOR EXTENDED DIMENSIONS: L...
Hammer Price:
🔒
AUTOMATED CONVEYOR SYSTEMS
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
AUTOMATED CONVEYOR SYSTEMS ROLLER CONVEYOR WITH: CONVEYOR LENGTH: 120 INCHES (10 FEET) OVERALL DIME...
Hammer Price:
🔒
AUTOMATED CONVEYOR SYSTEMS (ACS)
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
AUTOMATED CONVEYOR SYSTEMS ROLLER CONVEYOR WITH: CONVEYOR LENGTH: 120 INCHES (10 FEET) ROLLER WIDTH...
Hammer Price:
🔒
MISC
ROLLING PLASTIC WASTE BIN WITH: CASTERS OVERALL DIMENSIONS: LENGTH: 73 INCHES WIDTH: 34 INCHES HEIGH...
Hammer Price:
🔒
MISC
FOUR TIER SHELVES - USED STAINLESS STEEL FOUR TIER SHELF WITH: OVERALL DIMENSIONS: LENGTH: 18 INCHES...
Hammer Price:
🔒
AUTOMATED CONVEYOR SYSTEMS (ACS)
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
AUTOMATED CONVEYOR SYSTEMS SMOOTH TOP CONVEYOR WITH: BELT DIMENSIONS (INCHES): LENGTH: 114 WIDTH: 11...
Hammer Price:
🔒
2016 PEARSON CE60-TL
PACKAGING EQUIPMENT
2016 PEARSON CE60-TL CASE ERECTOR AND BOTTOM GLUE SEALER - USED CASE ERECTOR AND BOTTOM GLUE SEALER ...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
BELT INCLINE CONVEYOR 117" L X 11.5" W - USED BELT INCLINE CONVEYOR WITH: BELT DIMENSIONS LENGTH: 11...
Hammer Price:
🔒
BARTELT
PACKAGING EQUIPMENT
BARTELT HORIZONTAL FORM FILL AND SEAL WITH: PRODUCTION OUTPUT RATE: UP TO 70 POUCHES PER MINUTE PACK...
Hammer Price:
🔒
TRIANGLE L 6P
PACKAGING EQUIPMENT
TRIANGLE L 6P VERTICAL FORM FILL AND SEAL BAGGER WITH: FILM ROLL DIAMETER: 1.5 INCHES SEAL JAW LENGT...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
70-INCH LONG SMOOTH TOP CONVEYOR - USED 70-INCH SMOOTH TOP CONVEYOR WITH: OVERALL DIMENSIONS (INCHES...
Hammer Price:
🔒
AUTOMATED CONVEYOR SYSTEMS (ACS)
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
AUTOMATED CONVEYOR SYSTEMS CORNER ROLLER CONVEYOR WITH: ROLLER WIDTH: 12.5 INCHES CONVEYOR LENGTH: 8...
Hammer Price:
🔒
GORING KERR TEKTAMET 211
MISC
GORING KERR TEKTAMET 211 METAL DETECTOR WITH: WORKING APERTURE: WIDTH: 4.5 INCHES HEIGHT: 9.75 INCHE...
Hammer Price:
🔒
ROTARY ACCUMULATION TABLE-38
MISC
ROTARY ACCUMULATION TABLE-38 - USED ROTARY ACCUMULATION TABLE WITH: DIAMETER: 38 INCHES GUARD RAIL H...
Hammer Price:
🔒
TRIANGLE L 60
PACKAGING EQUIPMENT
USED TRIANGLE L 60 VERTICAL FORM FILL AND SEAL BAGGER WITH: FILM ROLL DIAMETER: 1.5 INCHES SEAL JAW ...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CLEATED INCLINE CONVEYOR WITH SS PRODUCT HOPPER - USED CONVEYOR WITH: INPUT HEIGHT: 73 INCHES CLEATE...
Hammer Price:
🔒
MTC H-LE-S3
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
MTC H-LE-S3 COMBO DUMP AND PALLET SEPARATOR WITH: WEIGHT CAPACITY: 3000 POUNDS OVERALL DIMENSIONS: L...
Hammer Price:
🔒
VIDEOJET 37 PLUS
MISC
VIDEOJET 37 PLUS WITH: OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT: 82 INCHES...
Hammer Price:
🔒
REFRIGERATION EQUIPMENT
USED REFRIGERATION UNIT WITH: OVERALL DIMENSIONS: LENGTH: 145 INCHES WIDTH: 96 INCHES HEIGHT: 80 INC...
Hammer Price:
🔒
CARDWELL VC1659
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CARDWELL VC1659 VIBRATORY CONVEYOR WITH: SHAKING TABLE DIMENSIONS: LENGTH: 180 INCHES WIDTH: 17.5 IN...
Hammer Price:
🔒
MISC
RO TUBE SYSTEM - USED RO TUBE WITH: LENGTH: 172 INCHES DIAMETER: 8 INCHES STAINLESS STEEL CONSTRUCTI...
Hammer Price:
🔒
TEXWRAP TLS-2219MP
PACKAGING EQUIPMENT
TEXWRAP TLS-2219MP INTERMITTENT MOTION L-SEAL SYSTEM - USED TEXWRAP TLS-2219 L-BAR WRAPPER WITH: MAX...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CONVEYOR BELT: BELT WIDTH: 30 INCHES. DUNNAGE RACK DIMENSIONS (INCHES): LENGTH: 60 INCHES WIDTH: 30 ...
Hammer Price:
🔒
AUTOMATED CONVEYOR SYSTEMS (ACS)
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
AUTOMATED CONVEYOR SYSTEMS 70" L BY 12" W CASE BELT CONVEYOR W/ VARIABLE SPEED C - USED CASE BELT CO...
Hammer Price:
🔒
AUTOMATED CONVEYOR SYSTEMS (ACS)
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
72-INCH ROLLER CONVEYOR WITH: OVERALL DIMENSIONS (INCHES): LENGTH: 72 WIDTH: 20 HEIGHT: 50 CONVEYOR ...
Hammer Price:
🔒