Snack Food Processing and Packaging Eqpt Auction

SACMI OPERA 200RF ROLL FED WRAPAROUND GLUE LABELER - USED SACMI OPERA ROLL FED WRAPAROUND GLUE LABELER: HIGH SPEED LABELING SYSTEM FOR PET, GLASS, AND METAL CONTAINERS CAN HANDLE CYLINDRICAL OR SHAPED CONTAINERS TRANSFER OF THE LABEL FROM THE CUTTING DRUM TO THE CONTAINER IS CARRIED OUT BY MEANS OF AN ALUMINUM VACUUM DRUM WITHOUT GRIPPERS OUTPUT: UP TO APPROXIMATELY 40,000 CONTAINERS PER HOUR, DEPENDING ON LABEL AND CONTAINER SIZES PREVIOUSLY USED TO LABEL COFFEE CANS: CAN DIMENSIONS: 4.25 INCH DIAMETER X 5 INCHES TALL LABEL WIDTH: 5 INCHES LABEL LENGTH: 13.35 INCHES TIMING SCREW AND STARWHEEL INFEED RIGHT TO LEFT PRODUCT FLOW 90 DEGREE TURN OUTFEED, RELATIVE TO THE INFEED STAINLESS STEEL AND FOOD GRADE CONSTRUCTION ALLEN-BRADLEY PANELVIEW PLUS 1000 HMI ALLEN-BRADLEY COMPACTLOGIX L35E CONTROLS

252" L BY 20" W PLASTIC MAT-TOP INTERLOCKED STAINLESS STEEL CONVEYOR - USED PLASTIC MAT-TOP CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH (APPROXIMATE): 252 INCHES WIDTH: 20 INCHES INFEED HEIGHT: 41.5 INCHES DISCHARGE: 46 INCHES GUIDE RAIL HEIGHT: 6 INCHES AND (1) SECTION 16 INCHES TALL BELT TYPE: MAT-TOP INTERLOCKED MOTOR: RPM: 1720 HORSEPOWER: 1 MOUNTED ON CASTERS FOR MOBILITY AND A STAINLESS STEEL FRAME ELECTRICAL: 208-230/480 VOLTS, 60 HERTZ, 3 PHASE

ADVANTAGE BC-5A-N4 5 TON CHILLER - USED CHILLER WITH: CAPACITY: 30,283 BTU PER HOUR AT 25... F RESERVOIR CAPACITY: 60 GALLONS PROCESS INLET: 1.25 INCHES PROCESS OUTLET: 1.25 INCHES AIR COOLED REFRIGERANT TYPE: 410A PROCESS PUMP: THROUGHPUT: 12 GALLONS PER MINUTE AIR REQUIREMENTS: 52 PSI MOTOR: 2 HORSEPOWER STAINLESS STEEL CONSTRUCTION COMPRESSOR MOTOR: 5 HORSEPOWER ELECTRICAL: 230 VOLTS, 60 HZ, PHASE 1

[INTERNATIONAL XFD FORMING HORN] HORN DIMENSIONS: LENGTH: 29.5 INCHES WIDTH 16, 20 INCHES HEIGHT 46 INCHES S/N: 157266B01 [INTERNATIONAL XFD FORMING HORN] S/N: 157266D03

ISHIDA DACS-V-012-SI/WP-N BELT CHECKWEIGHER - USED ISHIDA BELT CHECKWEIGHERS WITH: WEIGHING CAPACITY: 1.2 KG BELT CONVEYOR WIDTH: 9 INCHES LENGTH: 16 INCHES BELT DISCHARGE HEIGHT: 31.5 INCHES OVERALL DIMENSIONS LENGTH: 26 INCHES WIDTH: 20 INCHES HEIGHT: 64 INCHES ELECTRICAL REQUIREMENTS: 120 VOLTS 60 HZ 3-PHASE 1.7 AMPS

SIDEL ALFA ADHESIVE FRONT, BACK AND WRAPAROUND PRESSURE SENSITIVE LABELER - USED SIDEL ALFA ADHESIVE ROTARY LABELER WITH: TYPE: FRONT, BACK AND WRAP AROUND PRESSURE SENSITIVE MODEL: F35 12T S4 E2 OUTPUT: UP TO 200 BOTTLES PER MINUTE DEPENDING ON APPLICATION SIZE RANGE: BOTTLE DIAMETER: 50 - 120 MILLIMETERS LABEL LENGTH: 20 - 120 MILLIMETERS LABEL HEIGHT: 20 - 120 MILLIMETERS TABLE DIAMETERS: 4.5 INCHES DIRECTION OF TRAVEL: LEFT HAND OPERATION SERVO DRIVEN BOTTLE ORIENTING LABEL WIPE ON ROLLERS 12 HEAD PLATFORMS ALLEN-BRADLEY PANELVIEW PLUS 1250 HMI ON SWING ARM ALLEN-BRADLEY LOGIX5561 PLC TIMING SCREW AND STAR WHEEL INFEED ROLL FED LABELS 4 LABEL AGGREGATES MODEL: M90 SX 200 STAINLESS STEEL CONSTRUCTION SPEED: 260 BOTTLES/MINUTE BASED ON 375ML AND 800 ML BOTTLES ELECTRICAL: 440VOLT/60 HZ/3 PHASE COMPRESSED AIR CONSUMPTION: 80 NM3/HOUR LAST RUNNING GLASS BOTTLES

13'L X 8'W MULTI-CONVEYOR MASS FLOW BELT CONVEYOR WITH 2 HP MOTOR - USED MULTI-CONVEYOR MASS FLOW PLASTIC MAT-TOP CONVEYOR WITH: CONVEYOR DIMENSIONS: 8 FEET WIDE X 13 FEET LONG CONVEYOR HEIGHT: 34 INCHES 2 HORSEPOWER MOTOR HUBBELL POWER DISCONNECT SWITCH ADJUSTABLE CONVEYOR LEGS PAINTED, MILD STEEL FRAME

CLE 90 DEGREE TURN CONVEYOR WITH PARALLEL TRANSFER - USED CAN LINES ENGINEERING PLASTIC MAT-TOP CONVEYOR WITH: 90 DEGREE, RIGHT-HAND TURN FROM INFEED PARALLEL TRANSFER SECTION INFEED HEIGHT: 37 INCHES DISCHARGE HEIGHT: 42 INCHES CONVEYOR WIDTH: 14 INCHES INFEED LENGTH: 186 INCHES OUTFEED LENGTH: 60 INCHES OVERALL LENGTH: APPROXIMATELY 260 INCHES (2) 1 HORSEPOWER MOTORS STAINLESS STEEL CONSTRUCTION SCREW DOWN LEVELING FEET

PALLET OF MRO FORMER HORNS (4) PALLET DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT:55 INCHES

WEIGHPACK BREEZY BAGGER STAINLESS STEEL PRINT REGISTERED BAGGER ONLY VFFS - USED WEIGHPACK VFFS WITH: THROUGHPUT: UP TO 30 PACKAGES PER MINUTE DEPENDING ON PRODUCT AND OPERATOR MINIMUM BAG DIMENSIONS: LENGTH: 2 INCHES WIDTH: 2 INCHES MAXIMUM BAG DIMENSIONS: LENGTH: 36 INCHES WIDTH: 12 INCHES FOOT PEDAL OPERATION MANUAL TILT FROM HORIZONTAL TO VERTICAL PRINT REGISTERED TOUCHSCREEN CONTROLS STAINLESS STEEL CONSTRUCTION AIR REQUIREMENTS: 60 PSI ELECTRICALS: 1 PHASE, 60 HZ, 230 VOLTS

SOUTHERN CALIFORNIA ST1100 FRONT AND BACK LABELER - USED SOUTHERN CALIFORNIA ST1100 LABELER WITH: SPEED: UP TO 1,100 LINEAR INCHES PER MINUTE WEB WIDTH: 6 INCHES CONVEYOR DIMENSIONS (MISSING BELT): WIDTH: 6 INCHES LENGTH: 92 INCHES LABEL SIZE: MINIMUM: WIDTH: 0.5 INCHES LENGTH: 0.5 INCHES MAXIMUM: WIDTH: 6 INCHES LENGTH: 18 INCHES CORE DIAMETER: 1 INCH MOUNTED ON CASTERS PUSH-BUTTON CONTROLS WITH DIGITAL READOUT ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, SINGLE PHASE

[900] CHERRY-BURRELL MEPDA GAL DOME TOP STAINLESS STEEL BATCH PROCESSOR TANK - USED CHERRY-BURRELL MEPDA 900 GALLON BATCH PROCESSOR TANK WITH: CAPACITY: APPROXIMATELY 900 GALLONS TANK DIMENSIONS: DIAMETER: 66 INCHES SIDE WALL: 76 INCHES JACKETED HINGED MANWAY DOME TOP SLANT BOTTOM SWEEP AGITATION 1 HORSEPOWER AGITATION MOTOR MIXING BAFFLE SIDE BOTTOM DISCHARGE LAST APPLICATION: FOOD/CEREAL FLAVORINGS

[LOCK INSPECTION SYSTEMS] MET 30+ STAINLESS STEEL METAL DETECTOR - USED LOCK METAL DETECTOR WITH: WORKING APERTURE DIMENSIONS: WIDTH: 13.5 INCHES HEIGHT: 6.5 INCHES CONVEYOR BELT DIMENSIONS: LENGTH: 72 INCHES WIDTH: 12 INCHES INFEED HEIGHT: 34 INCHES DISCHARGE HEIGHT: 36 INCHES PRODUCTION FLOW: LEFT TO RIGHT VARIABLE SPEED DRIVE PUSH BUTTON CONTROLS PNEUMATIC PUSH ARM REJECT MOTOR: 0.33 HORSEPOWER PREVIOUSLY USED IN BAKERY APPLICATION

KHS ROLAND 32 HS HIGH SPEED ROTARY GLUE LABELER - USED KHS ROLAND 32 HS LABELER WITH: HIGH SPEED WRAP-AROUND GLUE LABELER SINGLE LABELING AGGREGATE CUT AND STACK LABELS CLOCKWISE MAIN TURRET ROTATION 32 BOTTLE STATIONS ON MAIN TURRET OUTPUT: APPROXIMATELY 800 BOTTLES PER MINUTE, DEPENDING ON BOTTLE AND LABEL PREVIOUSLY USED FOR .5 LITER PET BOTTLES OF WATER WORM SCREW AND STAR WHEEL INFEED NORDSON HOT MELT GLUE UNIT ALLEN-BRADLEY PANELVIEW PLUSS 1000 HMI ALLEN-BRADLEY LOGIX 5561 PLC STAINLESS STEEL CONSTRUCTION WITH FOOD GRADE CONTACT PARTS

GROEN PT 40 STAINLESS STEEL 40 GALLON HOT WATER JACKETED KETTLE W/ PROPELLER AGITATION. GROEN JACKETED KETTLE AND PROPELLER AGITATOR WITH: CAPACITY: 40 GALLONS BOWL DIMENSIONS: DIAMETER: 26 INCHES DEPTH: 24 INCHES OVERALL DIMENSIONS: LENGTH: 36 INCHES WIDTH: 42 INCHES HEIGHT: 61 INCHES DISCHARGE: FLANGED DIAMETER: 1.5 INCHES HEIGHT: 21 INCHES 2/3 JACKET: MAWP: 25 PSI AT 300 DEGREES FAHRENHEIT HEATING METHOD: DIRECT STEAM 316 STAINLESS STEEL CONSTRUCTION PEDESTAL BASE HINGED STAINLESS STEEL COVER PROPELLOR-STYLE AGITATOR MOTOR: 1/3 HP

2007 COMBI 2EZSB 2" TAPE BOTTOM SEAL CASE ERECTOR WITH: OUTPUT: APPROXIMATELY 15 CASES PER MINUTE, DEPENDING ON CASE DIMENSIONS TAPE BOTTOM SEAL 2 INCH TAPE HEAD CASE SIZE RANGE: MINIMUM: 8 INCHES LONG X 6 INCHES WIDE X 5 INCHES TALL MAXIMUM: 24 INCHES LONG X 16 INCHES WIDE X 18 INCHES TALL EZ LOAD WALK-IN CASE MAGAZINE HEAVY-DUTY WELDED STEEL CONSTRUCTION EMERGENCY E STOP

RAPAT V-BELT CONVEYOR WITH: CONVEYOR DIMENSIONS: (2) 7 INCH WIDTH BELTS LENGTH: 168 INCHES WIDTH: 12 INCHES INFEED HEIGHT: 24 INCHES DISCHARGE HEIGHT: 21 INCHES ELECTRICAL REQUIREMENTS: 208-230/460 VOLTS, 60 HERTZ, 3 PHASE PAINTED MILD STEEL FRAME MOUNTED ON CASTERS OVERALL DIMENSIONS: LENGTH: 176 INCHES WIDTH: 28 INCHES HEIGHT: 36 INCHES

MARQ HPE412-3(RH)DL TAPE BOTTOM SEAL CASE ERECTOR - USED MARQ TAPE BOTTOM SEAL CASE ERECTOR WITH: PRODUCTION OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION TAPE HEAD: 2 INCHES MAXIMUM FORMED CASE DIMENSIONS: LENGTH: 24 INCHES WIDTH: 18.5 INCHES HEIGHT: 18 INCHES MINIMUM FORMED CASE DIMENSIONS: LENGTH: 8 INCHES WIDTH: 5.25 INCHES HEIGHT: 3.5 INCHES MAXIMUM KNOCKDOWN CASE DIMENSIONS: LENGHT: 43 INCHES WIDTH: 33 INCHES MINIMUM KNOCKDOWN CASE DIMENSIONS: LENGTH: 13.25 INCHES WIDTH: 10.5 INCHES TOP AND BOTTOM VACUUM CUPS CONTINUOUS FEED HOPPER PHOTO EYE HAND CRANK OR MOTORIZED ADJUSTMENTS ELECTRICAL: 110 VOLTS, 60 HERTZ, 1 PHASE

PESTER PEWO FORM UVP3 ECONOMICAL CASE PACKER WITH: SPEED: UP TO 12 CASES PER MINUTE, DEPENDING ON MATERIALS AND APPLICATION PRODUCT INFEED CONVEYOR: 79 X 8 X 35 INCHES [LXWXH] SEALING METHOD: 2 INCH TAPE HEADS CASE SIZE: [LXWXH] MINIMUM: 150 X 120 X 105 MILLIMETERS MAXIMUM: 600 X 400 X 400 MILLIMETERS PRODUCT SIZE: [LXWXH] MINIMUM: 30 X 12 X 66 MILLIMETERS MAXIMUM: 440 X 150 X 250 MILLIMETERS DISCHARGE CONVEYOR: 79 X 25 X 38 INCHES [LXWXH]

2000 BLUEPRINT AUTOMATION TAPE BOTTOM SEAL CASE ERECTOR WITH: 2 INCH TAPE HEAD BOTTOM SEAL ALLEN-BRADLEY PANELVIEW PLUS 700 HMI PERSONNEL GUARDING MANUAL SWITCHES

[USED] KALLFASS UNIVERSA 5050 AUTOMATIC L BAR SEALER WITH: SPEEDS UP TO 30 CYCLES PER MINUTE SEALING FRAME DIMENSIONS: 20 INCHES X 20 INCHES FILM: CENTER FOLDED, APPROXIMATELY 45 GAUGE - 3 MIL FILM CRADLE: CLOSE TO FLOOR FOR EASY FILM ROLL LOADING OUTSIDE DIAMETER OF FILM ROLL: 16 INCHES MAXIMUM WIDTH OF FILM ROLL: 24 INCHES MAXIMUM SPEED OF TRANSPORT CONVEYOR: APPROXIMATELY 65 FEET PER MINUTE, CONSTANT SEALING SYSTEM: PERMANENTLY HEATED SEAL BAR SPECIAL COATING PERMANENTLY HEATED TEMPERATURE CONTROLLED BY PLC CLEARANCE HEIGHT OF SEALING FRAME: 4 INCHES SCRAP WINDING WHEEL HEAT TUNNEL ELECTRICAL: 208 VOLTS, 3 PHASE, 60 HERTZ

PACKINT 60 GALLON STAINLESS STEEL CHOCOLATE MELTING TANK - USED PACKINT MELTING TANK WITH: CAPACITY: 60 GALLONS TANK DIMENSIONS: LENGTH: 24 INCHES WIDTH: 28 INCHES DEPTH: 22 INCHES DISCHARGE DIAMETER: 2 INCHES REMOVABLE LID PUSH BUTTON CONTROLS MOUNTED ON CASTERS STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 260 VOLTS, 50/60 HERTZ, 3 PHASE

[KOSME] ADHESIVE COMPACT 440 4T S2 E2 SELF ADHESIVE PRESSURE SENSITIVE ROTARY LABELER - USED KOSME ADHESIVE COMPACT ROTARY LABELER WITH: PRODUCTION SPEED: UP TO 3000 BOTTLES PER HOUR, DEPENDING ON APPLICATION LABEL DIMENSIONS (INCHES): MAXIMUM LENGTH: 12.4 CORE DIAMETER: 3 MAX DIAMETER: 12 (APPROXIMATELY) STYLE: ROTARY (3) STATIONS (5) HEADS COLD GLUE FRONT, BACK, NECK LABELING WORKING HEIGHT: 40 INCHES OVERALL DIMENSIONS (INCHES): LENGTH: 90 WIDTH: 95 HEIGHT: 81 PUSH BUTTON CONTROLS STAR WHEEL TIMING INFEED STAINLESS STEEL CONSTRUCTION MOUNTED ON SCREW LEVELING LEGS ELECTRICAL: 3 PHASE, 60 HERTZ, 230 VOLTS LAST APPLICATION: 12 OUNCE NECK BOTTLES WITH A LABEL DIMENSION OF 4 BY 3.5 AND 1.75 BY 1.25 AT A SPEED OF 3,000 BOTTLES PER MINUTE

PEARSON CS30 AUTOMATIC TOP CASE SEALER - USED PEARSON CS 30 RANDOM AUTOMATIC TOP CASE SEALER WITH: FULLY AUTOMATIC, CONTINUOUS MOTION, CASE CENTERING, MAJOR FLAP FOLDING, SEALED CASE PASS THROUGH CAPABILITY. SPEED: UP TO 30 CASES PER MINUTE CASE RANGE: MINIMUM: 8 INCHES LONG X 8 INCHES WIDE X 3 INCHES TALL MAXIMUM: 36 INCHES LONG X 26 INCHES WIDE X 26 INCHES TALL SEALING: TAPE BOX CAPABILITIES: BLISS H SHIPPER, CSSC, RSC, SPLIT MINOR TRAY ALLEN-BRADLEY COMPACTLOGIX PLC

PPM SD VIBRATORY CONVEYOR 18" WIDE X 190" LONG - USED PPM SPECIAL DELIVERY VIBRATORY CONVEYOR WITH: TROUGH DIMENSIONS: 18 INCHES WIDE X 190 INCHES LONG X 5 INCHES DEEP TAPERED OUTFEED MECHANICALLY DRIVEN 1.5 HORSEPOWER MOTOR STAINLESS STEEL CONSTRUCTION GENTLE HANDLING: REDUCE COATING LOSS OF PRODUCT MINIMIZE PRODUCT BREAKAGE APPLICATIONS: DISTRIBUTION CONVEYOR IN-LINE STORAGE LONG TRANSFER CONVEYOR SCALE FEEDER

BLUEPRINT AUTOMATION TAPE BOTTOM SEAL CASE ERECTOR WITH: 2 INCH TAPE HEAD BOTTOM SEAL ALLEN-BRADLEY PANELVIEW PLUS 700 HMI PERSONNEL GUARDING MANUAL SWITCHES

AMBAFLEX SV-200-1000 SPIRAL CONVEYOR WITH: OUTPUT: UP TO 200 FEET PER MINUTE DEPENDING ON USE BELT SPECS: WIDTH: 8 INCHES FOOT PRINT: 4 FOOT SQUARE HEIGHT BETWEEN TIERS: 12 INCHES INFEED HEIGHT: 45 INCHES OUTFEED HEIGHT: 88 INCHES

ISHIDA DACS-V-012-SI/WP-N BELT CHECKWEIGHER - USED ISHIDA BELT CHECKWEIGHERS WITH: WEIGHING CAPACITY: 1.2 KG BELT CONVEYOR WIDTH: 9 INCHES LENGTH: 16 INCHES BELT DISCHARGE HEIGHT: 31.5 INCHES OVERALL DIMENSIONS LENGTH: 26 INCHES WIDTH: 20 INCHES HEIGHT: 64 INCHES ELECTRICAL REQUIREMENTS: 120 VOLTS 60 HZ 3-PHASE 1.7 AMPS

SEALED AIR RANDOM TOP ONLY CASE TAPER WITH: APPLICATION: AUTOMATICALLY FILLS VOID BAGS INSIDE OF CARTONS AS IT IS SEALED. UNINFLATED BAG IS CLIPPED TO THE CORNER OF THE CASE, FLAPS ARE CLOSED, CASE IS TAPED, THEN VOID BAG IS FILLED. CAPACITY: UP TO 10 CARTONS PER MINUTE TAPE HEAD WIDTH: 3 INCHES TOP TAPE HEAD ONLY AIR REQUIREMENTS: 8-10 CFM AT 100 PSI PERSONNEL GUARDING ADJUSTABLE WORKING HEIGHT CASTERS

96 INCH LONG X 32 INCH WIDE STAINLESS STEEL CONVEYOR BELT DIMENSIONS: LENGTH: 96 INCHES WIDTH: 32 INCHES INFEED AND OUTFEED HEIGHT: 62 INCHES OVERALL DIMENSIONS: LENGTH: 99 INCHES WIDTH: 48 INCHES HEIGHT: 68 INCHES STAINLESS STEEL CONSTRUCTION ADJUSTABLE GUIDE RAILS FOUR (4) SCREW-LEVELING FEET MOTOR HP: 0.5 ELECTRICAL REQUIREMENTS: 3 PHASE, 60 HERTZ 230/460 V, 1.72/0.86 A

FORMERS INTERNATIONAL FORMING HORNS PALLET INCLUDES 7 HORNS OF VARIOUS SIZES 10.25 INCH 9 INCH 5.5 INCH MADE FOR BOSCH SVE3600 PALLET DIMENSIONS: LENGTH: 48 INCHES WIDTH: 40 INCHES HEIGHT: 46 INCHES

3 PALLETS OF AGGREGATE AND MINERAL FILLERS - USED PALLETS OF MISCELLANEOUS ITEMS WITH: 2 PALLETS OF AGGREGATE PALLET OF MINERAL FILLERS

USED LOT OF 2 FORMER INTERNATIONAL XFD FORMING HORNS SIZE: 6.5 INCHES OVERALL DIMENSIONS: LENGTH: 52 INCHES WIDTH: 42 INCHES HEIGHT: 45 INCHES

[SACMI OPERA 200RF] HIGH SPEED LABELING SYSTEM FOR PET, GLASS, AND METAL CONTAINERS CAN HANDLE CYLINDRICAL OR SHAPED CONTAINERS TRANSFER OF THE LABEL FROM THE CUTTING DRUM TO THE CONTAINER IS CARRIED OUT BY MEANS OF AN ALUMINUM VACUUM DRUM WITHOUT GRIPPERS HOT MELT GLUE APPLICATOR ROLL FED LABEL AGGREGATES OUTPUT: UP TO APPROXIMATELY 40,000 CONTAINERS PER HOUR, DEPENDING ON LABEL AND CONTAINER SIZES PREVIOUSLY USED TO LABEL PET WATER BOTTLES TIMING SCREW AND STARWHEEL INFEED ROTATES COUNTER-CLOCKWISE HAS AUTO-SPLICING NOT EQUIPPED WITH ANTI-STATIC SYSTEM SET-UP TO RUN FULL BOTTLES UNIQUE, SAME-SIDE IN/OUT CONFIGURATION STAINLESS STEEL AND FOOD GRADE CONSTRUCTION ALLEN-BRADLEY PANELVIEW PLUS 1000 HMI ALLEN-BRADLEY COMPACTLOGIX L35E CONTROLS

HEUFT SPECTRUM TX BOTTLE AND CAN INSPECTOR UP TO 72,000 BOTTLES PER HOUR - USED HEUFT SPECTRUM TX INSPECTION WITH: PRODUCTION SPEED: 72,000 CANS PER HOUR PREVIOUS APPLICATION: GLASS BOTTLES FULL CAN INSPECTION FILL LEVEL CONTROL PHOTO EYE DETECTION INSPECTION AREA DIMENSIONS: LENGTH: 20 INCHES WIDTH: 15 INCHES HEIGHT: 56 INCHES OPERATOR INTERFACE CONTROLS STAINLESS STEEL CONSTRUCTION SECTIONAL BASE STAND ELECTRICAL: 120 VOLTS, 50/60 HERTZ, 1 PHASE

[TEXWRAP TLS-2219MP] INTERMITTENT MOTION L-SEAL SYSTEM - TEXWRAP'S TLS SERIES L-SEALERS SIMULTANEOUSLY MAKE THE END AND SIDE SEAL OF ONE PACKAGE, AS WELL AS THE FRONT SEAL OF THE TRAILING PACKAGE. THE SEAL IS MADE BY FEEDING PRODUCT INTO THE CENTERFOLD FILM WITH PHOTO-EYES DETECTING THE LEADING AND TRAILING EDGE OF THE PRODUCT. L-SEALERS FIT APPLICATIONS WHERE SPEEDS ARE SLOW TO MODERATE OR WHERE SPACE IS LIMITED, AND ARE AFFORDABLE, VERSATILE WRAPPERS WITHIN A CERTAIN RANGE OF PRODUCT SIZES. THE L-SEALER DESIGN ALSO INCLUDES A FULLY AUTOMATIC PRODUCT INDEXING & PACKAGE LENGTH ADJUSTMENT BY EITHER HORIZONTAL OR VERTICAL ELECTRIC EYE TO ACCOMMODATE MOST PACKAGE CONFIGURATIONS, PLUS LOW-MOUNT FILM CRADLE, SWIVEL OPERATOR PANEL, AND TOUCHSCREEN RECIPE LIBRARY TO EASILY RECALL PACKAGE SETUPS. THE STANDARD ALLEN BRADLEY PLC & HMI INTERFACE ASSURES USER FRIENDLY, RELIABLE OPERATION USED TEXWRAP TLS-2219 L-BAR WRAPPER WITH: CAPACITY: UP TO 50 PIECES PER MINUTE, DEPENDING ON INFEED AND PRODUCT. MAXIMUM PACKAGE SIZE: 9?H X 15.5?W X 19?L (STANDARD) 7?H X 15.5?W X 19?L (WITH CLOSING CONVEYOR OPTION) MINIMUM PACKAGE SIZE: 4?L X 2.75? W (STANDARD) 2?L X 2.75? W (WITH CLOSING CONVEYOR OPTION) FILM WIDTH: MAXIMUM: 28? CENTER FOLDED MINIMUM: 6? CENTER FOLDED OPTIONAL 64? FOLDER ATTACHMENT WITH 32? UNWIND CONVEYOR SPEED: 20 TO 100 FEET PER MINUTE AUTOMATIC REVERSING BELT MOTION TRIM TECHHNOLOGY ALLEN-BRADLEY PLC AIR REQUIREMENTS: 80 PSI, 4 CFM ELECTRICAL REQUIREMENTS: 240 VOLTS 60 HZ SINGLE PHASE HEAVY-DUTY WELDED TUBULAR STEEL STANDARD

PRO PACK SYSTEMS PRO SEALER TOP ONLY CASE TAPER - USED PRO PACK SYSTEMS CASE TAPER WITH: TOP ONLY CASE TAPER SEALER 2 INCH TAPE HEAD (DEKKA 22) 5 INCH WIDE RUBBER BELT (2) 1/2 HORSEPOWER MOTORS MAXIMUM BOX DIMENSIONS (INCHES): 17 X 17 CONVEYOR DIMENSIONS (INCHES): 91 LENGTH X 12 INCHES WIDE

[ECONOCORP] ECONOSEAL 9240 STAINLESS STEEL SIDE-LOAD CASE PACKER - USED ECONOSEAL 9240 CASE PACKER WITH: OUTPUT: UP TO 10 CASES PER MINUTE, DEPENDING ON CASE SIZE AND OTHER FACTORS CASE SIZE RANGE: MINIMUM: 8 INCHES X 6 INCHES X 4 INCHES MAXIMUM: 24 INCHES X 16 INCHES X 18 INCHES 2 INCH TAPE HEAD CASE CLOSURE HORIZONTAL CASE PACKER CARTON UP-STACKING INFEED SIDE CASE LOADING SANITARY CONSTRUCTION SINGLE LOAD STATION AIR REQUIREMENTS: 5.5 BAR, 95 L/MIN ELECTRICAL REQUIREMENTS: 220 VOLTS 60 HZ 3 PHASE HEAVY DUTY, WELDED STAINLESS STEEL FRAME

BILT-RITE F-4 122" L BY 6" W SMOOTH TOP BELT CONVEYOR - USED BILT-RITE CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 122 INCHES WIDTH: 6 INCHES INFEED HEIGHT: 29 INCHES DISCHARGE HEIGHT: 37 INCHES MOUNTED ON (4) LEGS STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE

NBE CHAIN DRIVEN ROLLER CONVEYOR 175" L X 46" W - USED NATIONAL BULK EQUIPMENT CHAIN DRIVEN ROLLER CONVEYOR WITH: CONVEYOR DIMENSIONS: 175 INCHES LONG X 46 INCHES WIDE CONVEYOR HEIGHT: 20 INCHES ROLLER DIAMETER: 2.5 INCHES ROLLER CENTERS: 4.5 INCHES (3) .75 HORSEPOWER MOTORS STAINLESS STEEL CONSTRUCTION SHAKER SECTION

MRO XFD VIBRATORY PLATE, 7 INCH DIAMETER. PALLET DIMENSIONS: LENGTH: 84 INCHES WIDTH: 40 INCHES HEIGHT: 33 INCHES.

[LOT OF 3] FORMER'S INTERNATIONAL FORMING HORNS - USED. FORMING HORNS USED FOR BOSCH SVE3600. SIZES: 5.5 INCHES, 8 INCHES. PALLET DIMENSIONS: LENGTH: 51 INCHES, WIDTH: 40 INCHES, HEIGHT:46 INCHES.

ROLLING CART WITH SEVEN HORNS - USED ROLLING CART WITH 7 HORNS 7 FORMING HORNS WITH ROLLING STORAGE CART CART DIMENSIONS: LENGTH: 28 INCHES WIDTH: 28 INCHES HEIGHT: 62 INCHES

WALKER 750 GALLON 316L STAINLESS STEEL JACKETED MIX TANK - USED WALKER MIX TANK WITH: CAPACITY: 750 GALLONS FLAT TOP, DISH BOTTOM JACKET RATING: MAWP: 75 PSI 320 F MDMT: 75 PSI -20 F AGITATION: SINGLE SHAFT BOTTOM SWEEP BAFFLE DRIVEN BY A 2 HORSEPOWER, 230/460 VOLTS, 60 HERTZ, 3 PHASE MOTOR DISCHARGE: BOTTOM CENTER 2 INCH DIAMETER CIP SPRAY BALL VARIOUS 2 INCH INLETS AND FITTINGS TOP MOUNTED HINGED MANWAY 316L STAINLESS STEEL CONSTRUCTION MOUNTED ON 4 LEGS

[ABB FLEX PICKER] PICK AND PLACE ROBOT WITH: PICK CAPABILITIES: UP TO 150 PICKS PER MINUTE, DEPENDING ON APPLICATION MAXIMUM SPEED: 10 METERS PER SECOND (6) UP WORKING DIAMETER: 1130 MILLIMETERS UNLIMITED ROTATION CAPABILITIES REACH: 1500 MILLIMETERS APPLICATIONS: MEAT PROCESSING PACKAGING APPROXIMATE OVERALL DIMENSIONS: LENGTH: 5 FEET WIDTH: 6 FEET HEIGHT: 88 INCHES ELECTRICAL REQUIREMENTS: 400 VOLTS, 60 HERTZ, 3 PHASE

CEIA THS/3F CONVEYOR METAL DETECTOR 16"W X 3.75" T - USED CEIA THS/3F CONVEYOR METAL DETECTOR WITH: EFFECTIVE APERTURE HEIGHT: 3.75 INCHES X 16 INCHES WIDE CONVEYOR DIMENSIONS: 14 INCHES WIDE X 41 INCHES LONG CONVEYOR HEIGHT: 33 INCHES RIGHT TO LEFT PRODUCT FLOW STAINLESS STEEL CONSTRUCTION CASTERS

2 FORMER INTERNATIONAL XFD FORMING HORNS 2 FORM INGREDIENT HORNS PALLET DIMENSIONS: LENGTH: 44 INCHES WIDTH: 47 INCHES HEIGHT: 55 INCHES

LOMA IQ3 11" X 13" METAL DETECTOR - USED LOMA IQ3 METAL DETECTOR HEAD WITH: APERTURE DIMENSIONS: HEIGHT:11.75 INCHES WIDTH: 13.75 INCHES OVERALL DIMENSIONS: LENGTH: 34.5 INCHES WIDTH: 20 INCHES HEIGHT: 30 INCHES TOUCHSCREEN HMI ENVIRONMENT RATING: IP66 304 STAINLESS STEEL CONSTRUCTION WITH POLISH FINISH MAX CURRENT: 2 AMPS ELECTRICALS: 120 VOLTS, 60 HZ

90 DEGREE TURN TABLE-TOP INCLINE CONVEYOR 10" WIDE - USED TABLE-TOP INCLINE CONVEYOR WITH: 90 DEGREE, LEFT HAND TURN FROM INFEED CONVEYOR WIDTH: 10 INCHES INFEED LENGTH: 18 INCHES OUTFEED LENGTH: 16.4 FEET INFEED HEIGHT: 14 INCHES DISCHARGE HEIGHT: 44 INCHES ADJUSTABLE LEGS PAINTED, MILD STEEL CONSTRUCTION .5 HORSEPOWER MOTOR

USED PALLET OF MRO INCLUDES SEW-EURODRIVE MOTOR INGREDIENT HOPPER DIAMETER: 14 INCHES SEW-EURODRIVE MOTOR AND STAND DIMENSIONS: LENGTH: 31 INCHES WIDTH: 16 INCHES HEIGHT: 18 INCHES