MultiLocation Mask Line Food and Beverage Auction from Major Producers

SPANTECH DUAL LANE S/S SANITARY BELT CONVEYOR, WITH DUAL INTRALOX BELTS - EACH BELT 18" W, APROX. 11 FT. STRAIGHT SIDE WITH 7 FT. TURN, ALL S/S CONSTRUCTION, SEW EURODRIVE MOTOR, CURRENT INFEED HEIGHT IS 41" (THIS IS ADJUSTABLE WITH ADJUSTABLE CASTERS), PORTABLE ON LOCKING CASTERS, OAD 18 FT. L X 43" W X 48" H, EMERGENCY STOP ON BOTH SIDES OF CONVEYOR

2010 MARCHANT SCHMIDT S/S SANITARY ACCUMULATION AND DIVERGER CONVEYOR THIS IS AN ACCUMULATION AND DIVERGING UNIT. IT CAN DIVERT 4-LANES OF PRODUCT AND ACCUMULATE, THEN DIVERT TO SINGLE FILE AT 120 PCS. A MINUTE, UNIT HAS (4) 1-5/8" W X 25" L FLAT BELTS AT INFEED, THEY FEED ONTO ACCUMULATION AREA BELTS. THERE ARE (16) V-BELT DESIGN BELTS. OVERALL 9" W X 33" L, THEY FEED ONTO DIVERGER SECTION WHICH IS 15"W X 40"L COMPRISED OF SS RODS AND FLAT PUCKS (1-1/2"W X 4"W), ADJUSTABLE FEET. CURRENTLY SET AT 44" IN AND 42" OUT, ALLEN BRADLEY MICROLOGIC CONTROLLER, ELECTRIC EYE AND AIR PNEUMATIC IN ACCUMULATION SECTION. UNIT IS LIKE BRAND NEW AND REMAINS IN EXCELLENT WORKING CONDITION. S/N: 18511-023

WAUKESHA CHERRY BURRELL 624DE THERMUTATOR. PRODUCT 400 PSI, MEDIA 250 PSI, PRODUCT 400 DEG F, MEDIA 400 DEG F. UNIT COMPLETE WITH START/STOP CONTROLS, OVERALL DIMENSIONS 72 INCHES WIDE X 72 INCHES LONG X 30 INCHES HIGH. LAST USED IN THE FOOD INDUSTRY, USED IN EXCELLENT CONDITION. S/N: 98113UA

SMALLEY 1-V-015-007-SS-USDA VIBRATORY S/S FEEDER CONVEYOR S/N: 9108 APROX.- 15" W X 84" L X 37" DISCHARGE HEIGHT - LAST USED IN FOOD INDUSTRY, SELF-CONTAINED ELECTRIC/HYDRAULIC OPERATED - NOT ADJUSTABLE SPEED, 1/2 HP, 208/230-460 V, OVERALL DIMENSIONS 39" W X 84" L X 68" H, ALL S/S SANITARY USDA APPROVED CONSTRUCTION, UNIT IS IN EXCELLENT WORKING CONDITION, LIKE NEW, UNIT IS PARTIALLY SKIDDED NOW AND CAN BE COMPLETELY CRATED FOR $250

FMC LINK BELT S/S SANITARY VIBRATORY FEEDER (NOW OWNED BY PPM TECHNOLOGIES) - MAIN FEED PAN 12" W X 6" D X 84" L, 1 HP, 230/460 V, 3.6 / 1/8 AMPS, DISCHARGE HEIGHT 35". THIS ADJUSTABLE, FOOT PAD MOUNTING TO FLOOR, ALL S/S CONSTRUCTION, OAD'S: 42" W X 104" L X 43"H, LAST USED IN FOOD INDUSTRY, USED IN EXCELLENT WORKING CONDITION

HOPPMAN FT/40 CENTRIFUGAL BOTTLE FEEDER S/N: 16136

FOOD PROCESS SYSTEMS S/S SANITARY BOX FILLER ON PORTABLE CASTERS, WITH ALLEN BRADLEY SERVO MOTOR AND CONTROLS, APROX. 12" W X 116" L BOX FILLING CONVEYOR SYSTEM, BLUE INTRALOX BELT SET AT 32" WORK HEIGHT, SEE THROUGH PLASTIC FEED CHUTE OVER BELT, OAD'S: APROX. 36" W X 120" L X 86" H. USED IN EXCELLENT WORKING CONDITION.

FOOD PROCESS SYSTEMS 6000 S/S SANITARY BOX FILLER S/N: 145702 WITH ALLEN BRADLEY ULTRA 3000 CONTROLLERS WITH PANELVIEW 300 SCREEN, A-B SERVO MOTOR, APROX. 12" W X 110" L INTRALOX BOX FILLING CONVEYOR SYSTEM, MFG. BY FOOD PROCESS SYSTEMS, LODI, WI; WHITE FLIGHTED INTRALOX BELT SET AT 36" WORK HEIGHT, S/S SANITARY CONSTRUCTION, SEE THROUGH PLASTIC FEED CHUTE OVER BELT, HAS PUSH OFF REJECT FEATURES. THIS WAS A STAND ALONE SYSTEM USED TO FILL BOXES OF APPETIZERS. UNIT WAS FEED FROM AN ISHIDA SCALE.

BOXXER T-30 AUTOMATIC CASE ERECTOR AND BOTTOM TAPE SEALER FROM EAGLE PACKAGING MACHINERY, MODEL BOXXTER T-30, S/N 14281, 3/60/230 V, THIS IS AN AFFORDABLE AND COMPACT ERECTOR CAPABLE OF RUNNING BOTH REGULAR-SLOTTED AND HALF-SLOTTED STYLE BOXES, ERECTING AND TAPING UP TO 30 CASES/MIN. SYSTEM WAS LAST USED IN THE FOOD INDUSTRY. MIN. CASE SIZE 9.5" L X 7.5" W X 5" DIAGONAL, MAX. CASE SIZE 20" L X 16" WIDE X 16" DIAGONAL.

200 CU FT STAINLESS STEEL LIQUIDS/POWDER PADDLE/RIBBON BLENDER (111 CU FT CAPACITY TO TOP OF AGITATOR ARM, TROUGH MEASURES: 48"W X 96"L X 80" DEEP OVERALL, AGITATOR IS 46" DIA WITH 3-1/2" WIDE BLADES X 3/8" THICK, SINGLE SHAFT, NO MFG TAG, 3 INCH END BOTTOM DRAIN; 21-1/2 CLEAR TO GROUND, 2 HP SEW EURODRIVE, 1720 RPM, GEARBOX TAG INFO: 1720 7.4 232.29 109.2, UNIT HAS COUNTERBALANCED LID, LID HAS (3) 3 INCH INLETS AND (1) 2 INCH INLET, OADS: 77"W X 120"L X 108"H (ADD 30" TO HEIGHT IF LID INSTALLED), UNIT LAST USED IN THE FOOD INDUSTRY, USED IN EXCELLENT WORKING CONDITION)

2-TANK CIP UNIT, EACH TANK APROX. 50 GAL., UNIT LAST USED IN THE DAIRY INDUSTRY, ALL S/S ON COMMON FRAME, EACH TANK MEASURES 24" X 24" X 37" DEEP, OVERALL DIMENSIONS OF THE UNIT ARE 53" L X 26" W X 55" H

APROX. 34" X 167" S/S SANITARY BLUE INTRALOX BELT CONVEYOR, ALL S/S CONSTRUCTION, INFEED AND DISCHARGE HEIGHT CAN BE CHANGED WITH THE ADJUSTABLE LEGS, HYDRAULIC DRIVEN, 2-1/2" SIDE RAILS, PORTABLE ON CASTERS, UNIT LAST USED IN THE FOOD INDUSTRY.

2007 PMR (PACKAGING MACHINERY RESOURCES) 1300 DUAL LANE CONTINUOUS CONTAINER FILLER, SEALER, LIDDER S/N: 20070207, WITH ALL S/N SANITARY SYSTEM, 440 VOLT, ALLEN BRADLEY MICROLOGIC CONTROLLER, ALLEN BRADLEY POWERFLEX SPEED CONTROLLER, ALLEN BRADLEY PANELVIEW 300 CONTROL PAD, UNIT IS ON CASTERS, SYSTEM IS RATED AT APROX. 30 CONTAINERS PER MINUTE, CURRENT CONTAINER DIAMETER IS APROX. 6", -- THIS SYSTEM DENESTS THE CONTAINERS, FILLS THE CONTAINERS, PUTS A PROTECTIVE SEAL ON THE CONTAINER AND THEN LIDS.

ECONO CHESSE CORP. 16" W X 189" L S/S SANITARY INCLINE BLUE BELT CONVEYOR S/N:2 WITH 16" WIDE SANITARY SOLID BLUE BELTING, FIRST SECTION OF CONVEYOR MEASURES 90" BEFORE INCLINE SECTION, 8" SIDE RAILS RUN THE ENTIRE FIRST SECTION ON THE CONVEYOR, INCLINE TROUGHING SECTION OF CONVEYOR MEASURES 96", INFEED HEIGHT IS 19", DISCHARGE HEIGHT IS 48", HEIGHT COULD BE RAISED WITH ADJUSTABLE LEGS, OVERALL DIMENSIONS ARE 189" L X 45" W X 55" H, BALDOR 2 HP DRIVE, 3/60/30/460 V, 1755 RPM, 1.5 SECOND PER FOOT SPEED, VIDEO OF SYSTEM UNDER POWER UPON REUEST, SYSTEM SHOULD SHIP VIA REGULAR FLATBED, COULD CRATE FOR $600 JUST NOT SURE IF THERE IS A COMMON CARRIER THAT WILL TAKE A SYSTEM THIS LONG.

INCLINE CONVEYOR - WORKING CONDITION, (2) AIR CYLINDERS, WASH GUARD MOTOR GEARBOX, ADJUSTABLE LEGS, SIDE RAILS, NEEDS NEW BEARINGS AND THE BELT IS IN NEED OF REPLACEMENT, 16-1/4" W BELT, 1/2 HP, 115 VOLT, 1725 RPM, SINGLE PHASE, OVERALL DIMENSIONS APROX. 155" L X 25" W X 43-1/2" H

CONVEYOR - WORKING CONDITION, SPEED CONTROLS, MOTOR GEARBOX, 1 HP, 90 VOLTS, 1750 RPM, ADJUSTABLE LEGS, OVERALL DIMENSIONS APROX. 74-1/4" L X 20" W X 36-1/2" H

INCLINE CONVEYOR, WORKING CONDITION, MOTOR GEARBOX, ADJUSTABLE LEGS, E-STOP, 1/2 HP, 230/460 V, 1740 RPM, 3 PHASE, 12' W BELT, OVERALL DIMENSIONS APROX. 108-1/2" L X 39" W X 44" H

DAIRY KING 800 GAL. BULK TANK S/N: 800 S SS80 5002 WITH COOLING LINES HOLD PRESSURE, (2) AGITATORS, (2) PADDLES, VOLT 115, LEVEL STICK, OUTLET 1-1/2" THREADED, OVERALL DIMENSIONS APROX. 124" L X 69" W X 64" H

APROX. 100 GAL./ 400 LITRE NON-JACKETED VAT, MANUAL STIR, HEAVY S/S CONSTRUCTION, TIPPING MECHANISM IS MANUAL, (2) PINS FOR LOCKING THE VAT AT DIFFERENT ANGLES, S/S LID WITH 2" TRI-CLAMP, FULLY WELDED AND COLOR CLEANED, (4) 4" SWIVEL LOCK CASTERS, LEVEL STICK, 2' STAINLESS HANDLE 3/4" CUT HARP, TOP OF BOWL AT 36", INSIDE DIMENSIONS APROX. 31-1/2" DIA. X 23" DEEP, OVERALL DIMENSIONS APROX. 51-1/2" W X 38-1/2" H

150 GAL. CHEESE VAT WITH WATER HEAT, NEW BALL-FEET / SUPPORTS, 2" TRI-CLAMP OUTLET, VENT, INSIDE DIMENSIONS APROX. 60" L X 30" W X 21" D, OVERALL DIMENSIONS APROX. 73" L X 34" W X 30-1/2" H

KUSEL 66 GAL. CHEESE VAT, MODEL 4MX, S/N 18232, CAPACITY 250 LITRES OR 66 GAL., S/S CONSTRUCTION, HOT WATER, ADJUSTABLE BALL-FEET, (2) FORKERS, (2) PADDLES, (2) POWER KNIVES, START/STOP, SPEED CONTROL, REVERSE/FORWARD SWITCH, HAS PITS INSIDE THE TUB, AGITATOR (2) WORM GEAR REDUCERS, POWERED BY 3/4 HP VFD, SINGLE PHASE, 115 V, STAINLESS SHROUDED WITH STAINLESS END SUPPORTS, PUMP: 3 PHASE, 230/460 V, 3450 RPM, (1) 2" OUTLET, OVERALL DIMENSIONS APROX. 64" L X 34-1/2" W X 81" H

INCLINE CONVEYOR - WORKING CONDITION, ON S/S/ STAND, SWIVEL LOCKING CASTERS, LESSON 1 HP PUMP, 230/460 VOLT, 1140 RPM, 3 PHASE, (7) REMOVAL CONNECTING GUARDS, 9" X 10" DROP SHAFT OUTLET, BELT DIMENSIONS APROX. 9-3/4" W X 156-1/2" L (TOP VIEW ONLY) , OVERALL DIMENSIONS APROX. 85' L X40-1/2" W X 146" H

APROX. 1,500 GAL. S/S TANK, SINGLE SHELL, NON-FOOD GRADE, WING TOP DOOR WITH HOOK LOCKS, SPRAYBALL, (2) LIFT ANCHORS, DIXON 1-1/2" - 2" VALVES, (1) 1-1/2" INLET, (2) 2" INLETS, (1) 2" OUTLET, APROX. 57" DIA. X 153' DEEP INSIDE DIMENSIONS, OVERALL DIMENSIONS APROX. 66" L X 70" W X 159" H

APROX. 1,500 GAL. S/S TANK, SINGLE SHELL, NON-FOOD GRADE, WING TOP DOOR WITH HOOK LOCKS, SPRAYBALL, (2) LIFT ANCHORS, DIXON 1-1/2" - 2" VALVES, (1) 1-1/2" INLET, (2) 2" INLETS, (1) 2" OUTLET, APROX. 57" DIA. X 153' DEEP INSIDE DIMENSIONS, OVERALL DIMENSIONS APROX. 66" L X 70" W X 159" H

APROX. 1,500 GAL. S/S TANK, SINGLE SHELL, NON-FOOD GRADE, WING TOP DOOR WITH HOOK LOCKS, SPRAYBALL, (2) LIFT ANCHORS, DIXON 1-1/2" - 2" VALVES, (1) 1-1/2" INLET, (2) 2" INLETS, (1) 2" OUTLET, APROX. 57" DIA. X 153' DEEP INSIDE DIMENSIONS, OVERALL DIMENSIONS APROX. 66" L X 70" W X 159" H

PLATE HEAT EXCHANGER WITH ADJUSTABLE BALL FEET, (87) COOLING/HEATING PLATES, COMES WITH MANUAL AND EXTRA PLATES, (4) 4" AND (2) 2-1/2" INLETS, (4) 4" AND (2) 2-1/2" OUTLETS, PLATE DIMENSIONS APROX. 25" L X16-1/2" W X 61" H, OVERALL DIMENSIONS APROX. 89" L X 35" W X 97" H

HTST SYSTEM WITH CONTROL PANEL WITH TOUCHSCREEN, CHART RECORDER WITH PAPER, MOUNTED ON S/S FRAME, 1-1/2" AIR ACTUATOR BUTTERFLY VALVE, THERMOMETERS, HYDRONIC EXPANSION TANK, MODEL HTX15, PSI 100, TEMP 240 F, POSITIVE PUMP, WRIGHT FLOW TECHNOLOGIES, MODEL CP1070008, S/N 63622/B/15, OVERALL DIMENSIONS APROX. 67-1/4" L X 42" W X 80" H, HP 1.5; VOLT 230/460, RPM 1755, 3 PHASE

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, WITH 2" TAPE HEAD, 110 VOLT

2000 OK INTERNATIONAL SUPERFORMER 1 CASE ERECTOR/TAPER S/N: 00-21098. OEM 2" TAPE HEAD, 480 V, 3 PHASE, 60 HZ, OEM CASE SIZE RANGE - MINIMUMS ARE APROX. 8" L X 8" W X 6" D AND MAXIMUMS ARE APROX. 24" L X 20" W X 24" D; OEM RATED AT UP TO 15 CASES PER MINUTE, S/S FRAME INCLUDING HOUSING, POWERED BELT HOPPER, OVERALL DIMENSIONS APROX. 127" L X 66" W X 78" H. THIS SYSTEM WAS LAST USED IN A CHEESE PLANT AND REMAINS IN EXCELLENT CONDITION.

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, WITH 2" TAPE HEAD, 110 VOLT

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, S/N: 50072 WITH 2" TAPE HEAD, 110 VOLT

INTERPACK TOP AND BOTTOM CASE SEALER TAPER, MODEL 4-B, S/N: TM09511 E 001 WITH AUTOFLAP. IPG'S UA SERIES UNIFORM AUTOMATIC CASE SEALERS ARE OPERATOR FREE MACHINES THAT FOLD THE TOP FOUR FLAPS AND PROCESS SAME SIZED RSC STYLE CASES. SIDE BELT DRIVE IS PREFERRED FOR VOID FILLS, OVERFILLS AND LIGHT WEIGHT CASES; OFFSET TAPE HEADS WILL PROCESS AS LOW AS 3-1/2" TALL, COMPACT 65" LONG FRAME; STANDARD INTERLOCKING SAFETY GATES; SELECTABLE FLOATING UPPER HEAD TO PROCESS MILD OVERFILLS; STANDARD INDEXTING GATE; SELF TENSIONING / SELF TRACKING BELT DRIVE. INTERPACK CAN CUSTOMIZE TO SPECIFIC REQIREMENTS SUCH AS LINE VOLTAGE, OPERATION RANGE OR 4-FLAP PICKUP ASSEMBLIES. SYSTEM JUST REMOVED FROM MA CHEESE MFG. FACILITY AND REMAIN IN EXCELLENT WORKING CONDITION.

3M 700 RKS TOP AND BOTTOM CASE TAPER, TYPE 19300, WITH 3" TAPE HEADS, 115 VOLT, 5.8 AMPS S/N: 6187

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, WITH 2" TAPE HEAD, 110 VOLT

TETRA MTC-108/W-6-2 SPIRAFLO TUBLAR S/S HEAT EXCHANGER S/N: 123096-04. ALL S/S UNIT, 7 TUBES, 4" OPENING, OVERALL DIMENSIONS 256" LONG X 38" WIDE X 29" HIGH, UNIT WAS LAST USED IN THE FOOD INDUSTRY, SYSTEM IS IN EXCELLENT CONDITION

CTM 3600-PA PRINTER APPLICATOR WITH PORTABLE STAND AND PARTS UNIT S/N: 3600-0726-0504. THE 3600-PA DUAL ACTION TAMP (DAT) PRINTER APPLICATOR IS A HIGH SPEED, THERMAL TRANSFER LABELER USED TO PRINT AND APPLY PRESSURE SENSITIVE LABELS THAT CAN BE PROGRAMMED FOR SINGLE OR TWO PANEL LABELING APPLICATIONS APPLIED TO VARIOUS CARTONS, CASES OR PALLETS. THE SINGLE PANEL CAN BE APPLIED TO EITHER THE FRONT OR THE SIDE. SATO OR ZEBRA PRINT ENGINE INTEGRATED INTO THE APPLICATOR TO PRINT VARIABLE DATA. CAN BE MOUNTED IN ALMOST ANY POSITION TO APPLY LABELS TO THE LEADING, SIDE OR TRAILING PANELS OF VARIOUS PRODUCTS. MOUNTING CAN BE ORIENTED UP OR DOWN DEPENDING UPON LABEL SIZE AND POSITION ON THE PRODUCT. SHORT HEIGHT ACTUATOR ASSEMBLY ALLOWS THE UNIT TO REACH OVER A CONVEYOR TO PRODUCTS WHICH ARE NOT AT THE EDGE OF THE CONVEYOR - 4" TALL LABELS CAN BE LOCATED 1/4" FROM THE BOTTOM OF PRODUCTS. RIGHT HAND OR LEFT HAND VERSION FOR EITHER SIDE OF CONVEYOR UP TO 7.1" WIDE LABELS, UP TO 6.6" PRINT WIDTH BUILT-IN BAR CODES AND ALPHA-NUMERIC FONTS PROVEN TAMP-BLOW APPLICATION PLC CONTROL USER-FRIENDLY OPERATOR INTERFACE WITH EASY-TO-READ LCD DISPLAY. QUICK ACCESS TO SET-UP PARAMETERS - RUGGED AND VERSATILE FOR STANDARD AND CUSTOM APPLICATIONS, EQUIPPED WITH MULTIPLE ONBOARD I/O SIGNALS PREWIRED TO EXTERNAL CONNECTORS. DIMENSIONS DEPENDENT UPON LINE CONFIGURATION WEIGHT APPROX. 150 LBS., ELECTRICAL 108-132 VOLTS AC, 5 AMPS,54/60 HERTZ, SINGLE PHASE, PNEUMATIC 90 PSI., 3-5 CFM, COMMUNICATIONS RS 232, PARALLEL -ENVIRONMENTAL OPERATING 41O F TO 104O F (5O C TO 40O C), STORAGE -4O F TO 104O F (-20O C TO 40O C), PRINTING METHOD THERMAL TRANSFER, DIRECT THERMAL PRINT RESOLUTION 203 OR 305 DPI, DEPENDENT UPON PRINT ENGINE, PRODUCT SENSING PHOTOELECTRIC, PLC INPUT, APPLICATOR CONTROL MICRO PLC WITH OPERATOR KEY-PAD AND 2-LINE DISPLAY FOR PRINT SPEED, FONTS, BAR CODES OR GRAPHICS, SEE PROGRAMMING MANUAL OF PRINTER MANUFACTURER. THE 3600A-PA PRINTER APPLICATOR IS A HIGH-SPEED LABELER USED TO THERMALLY PRINT AND APPLY PRESSURE SENSITIVE LABELS TO MOVING PRODUCTS. A THERMAL TRANSFER PRINTER IS INTEGRATED INTO AN APPLICATOR TO FORM A SELFCONTAINED UNIT THAT WILL PRINT VARIABLE DATA ONTO A LABEL. THE PRINTER/APPLICATOR CAN BE MOUNTED IN ALMOST ANY POSITION ADJACENT TO PRODUCT FLOW TO APPLY LABELS TO TOP, SIDES OR BOTTOM OF PRODUCTS AS THEY PASS BY.

3M 200A ADJUSTABLE TOP AND BOTTOM CASE TAPER, TYPE 29200, S/N: 7844 WITH 2" TAPE HEAD, 110 VOLT

2002 BLENTECH SM-4848-PJS S/S SANITRY BATCH STEAM COOKER, LASTED UTILIZED IN THE FOOD INDUSTRY, MAWP PSIG 45 AT 292 DEGREE F, MDMT 45 PSIG AT -25 DEGREE, PRESSURE JACKETED AND LIVE STEAM BOTTOM INJECTION, SCRAPED SURFACE AGITATION WITH PADDLES, APROX. 22 CU. FT. WORKING (630 LITRES), UNIT WAS RECENTLY ULTRASOUND TESTED FOR JACKET INTEGRITY. NOTE: UNIT WILL NEED TOP STEAM COVER LID AND SHAFT SEARS IN REAR

APROX. 10" WIDE X 201" LONG INCLINE INTRALO BELT CONVEYOR WITH 12" HIGH INFEED, 41" HIGH DISCHARGES, S/S SIDE RAILS - RUN ENTIRE LENGTH OF UNIT; ALL S/S SANITARY CONSTRUCTION; HYDRAULIC DRIVEN, PORTABLE ON CASTERS

APROX. 10" WIDE X 281" LONG INCLINE S/S SANITARY INTRALO BELT CONVEYOR WITH 1/2" HIGH CLEATS, 9" APART, INFEED 9" HIGH, DISCHARGE 13.5"; 2" GUIDE RAILS RUN ENTIRE LENGTH OF CONVEYOR, PORTABLE LOCKING CASTERS, LESSON S/S WASH DOWN DRIVE MOTOR, SEE MOTOR TAG PHOTO FOR SPECS. UNIT WAS LAST USED IN THE FOOD INDUSTRY AS A PACK OFF CONVEYOR ROM A BAGGER. SYSTEM IS IN EXCELLENT WORKING CONDITION.

2011 FABCO F4-FBC 18" X 108" S/S SANITARY CONVEYOR S/N: 310305-431 WITH 2-LUG LINK CHAIN FOR BLOCKS OR BOXES, 19" BETWEEN SIDE RAILS WITH 3" HIGH SIDE WALLS, 13" OVERALL WIDE ACROSS CHAIN AREA, 108" LONG BELTS, 31" HIGH WITH ADJUSTABLE LEGS, 1 HP, 208-230/460 - COMPLETE WITH CONTROL BOX, UNIT HAS NEW BELTING ON IT. USED BELTING WILL COME WITH THE CONVEYOR, LAST USED IN THE FOOD INDUSTRY TO CONVEY BLOCKS OF CHEESE, USED IN VERY GOOD WORKING CONDITION.

BRADMAN LAKEDUAL MANDREL TRAY FORMER, MODEL XS2-60, S/N: 16891 WITH ALLEN BRADLEY MICROLOGIX CONTROLLER, 480 V, PORTABLE ON CASTERS, UNIT LAST USED IN THE FOOD INDUSTRY, SYSTEM REMAINS IN EXCELLENT CONDITION

THERMO GORING KERR TEK DSP3/3-PSU S/S SANITARY METAL DETECTOR. UNIT WAS LAST USED IN THE FOOD INDUSTRY. SPECS INCLUDE APPERATURE OPENING 7-1/2" W X 7" H, ALL S/S HEAD AND FRAME, FRAME EXTENSION IS CARBON STEEL, 120/230 VAC, 50/60 HZ, 6" W WHITE INTRALOX BELTING, 6-1/2" HIGH PRODUCT CLEARANCE, AIR BLAST REJECT, OVERALL DIMENSIONS WITH THE HOPPER EXTENSION ARE 34" WIDE X 64" LONG X 82" HIGH, DIMENSIONS WITH THE HOPPER EXTENSION REMOVED ARE 32" WIDE X 61" LONG X 45" HIGH. THIS UNIT HAS A 12-DOLLAR BATTERY THAT NEEDS TO BE REPLACED TO CLEAR THE FAULT CODE.

EASTEY ET1608-30-MPV-1 HEAT SHRINK TUNNEL S/N: ET1608 301-5090. USED SHINK TUNNEL WITH 4-DIRECTIONAL AIR FLOW PROVIDES POSITIVE SHIRNKING, VARIABLE VELOCITY CONTROL, LOCKIGN CASTERS, VARIABLE SPEED CONVEYOR, ROLLER CONVEYOR, THREE HEATER BANKS, CHAMBER DIMENSIONS 30 L X 16" W X 08" H. DESIGNED TO SEAL MOST POLYOLEFIN, POLYETHYLENE AND PVC SHRINK FILMS, SEALED BEARINGS (NOT BUSHINGS) ON DRIVE AND IDLER SHIFTS; ADJUSTABLE TEMPERATURE CONTROLS; DELAYED COOL DOWN AND OVER TEMPERATURE PROTECTION, FOLD DOWN ELECTRICAL CONTROL PANEL FOR EASY MAINTENANCE; CONVEYOR SPEED UP O 67 FT. PER MINUTE; HEAVY DUTY CASTERS FOR TRANSPORTATION WITHIN PLANT LEVELING LEGS PROVIDE STURDY BASE ONCE IN PLACE; TUNNEL OPENING HEIGHT 8"; EFFECTIVE TUNNEL OPENING WIDTH: 16"; TUNNEL LENGTH 30"; NUMBER OF HEATING CHAMBERS 1; CONVEYOR BELT TYPE ROLLER CONVEYOR; MAXIMUM BELT SPEED 67 FT. PER MINUTE; VOLTAGE 220; ELECTRICAL PHASE SINGLE PHASE; HERTZ 60 HZ. LAST USED IN THE USED FOOD INDUSTRY AND REMAINS IN EXCELLENT WORKING CONDITION.

30" DIAMETER X 60" L S/S SANITARY COATING TUMBLE DRUM, ALL S/S SANITARY, 1/2 HP 230/460 V DRIVE, PORTABLE ON CASTERS, UNIT LAST USED IN THE DAIRY INDUSTRY DOING CHEESE.

SUNY 3 PLY OVER WRAPPER MACHINE

MADDOX MIT DRY 190 M - 75KVA / 50HZ, VOLTAGE 208 - 416 Y / 240

3 PLY OVER WRAPPER MACHINE

INGERSOL RAND 2475 COMPRESSOR SYSTEM AND DRYER S/N: NAR10706164

GROTE S/A SANITARY SLICER/APPLICATOR. PRODUCT SIZE UP TO 6" (152.4 MM) DIA., SLICING ZONE - 22", 30" OR 48" WIDE; SLICE THICKNESS UP TO .5" (12.7 MM) STANDARD, UP TO 1.5" (38.1 MM) OPTIONAL; SLICING ZONE WIDTHS 22" (558.8 MM), 30" (762 MM), OR 40" (1016 MM); ELECTRICAL 200 - 575 VAC, 50/60 HZ, 3 PHASE; WATER 40-100 PSI (REQUIRED WITH SOME PRODUCTS). THE SLICER/APPLICATOR SLICES AND APPLIES A WIDE RANGE OF PRODUCTS DIRECTLY ONTO YOUR PROCESSING LINES IN MULTIPLE LANES WITH PRECISE TARGETING; CUSTOMIZE TO YOUR OPERATION WITH HEAD AND LANE CONFIGURATION, SLICING ZONE SIZE, LEFT OR RIGHT HAND ORIENTATION AND CANTILEVERED DESIGN. CONTINUOUS PRODUCT LOADING WITH GRAVITY FEED AND OPTIONAL LOW-LEVEL SENSOR REDUCES DOWNTIME AND MAINTAINS SLICE QUALITY. ITS NEW SANITARY DESIGN FEATURES AN OPEN CHANNEL FRAME AND EASY ACCESS FOR FAST AND THOROUGH CLEANING. SLICE AND APPLY OR BULK SLICE UP TO 150 STROKES PER MINUTE, PER LANE; STACK AND SHINGLE UP TO 120 STROKES PER MINUTE, PER LANE; CUSTOM HEIGHT, FRAME ORIENTATION, HEAD AND LANE CONFIGURATIONS; CONTINUOUS PRODUCT LOADING REDUCES DOWNTIME; SANITARY DESIGN WITH NEW OPEN CHANNEL FRAME, WATERSHED ENCLOSURE AND EASILY REMOVABLE PARTS; LAST USED IN THE FOOD INDUSTRY SLICING CHEESE, USED IN EXCELLENT CONDITION.