TechCraft Inc Complete Machining and Fabrication Shop

Equipment Hub Auctions, LLC

Category: CNC MACHINE CENTERS

Total Lots: 101

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 101 lots

Year	Make	Model	Lot Description	Hammer Price
2014	MULTICAM	3000	2014 MULTICAM 3000 CNC PLASMA CUTTER. WEIGHT: APPROX. 4500 LBS, CUTTING AREA DIMENSIONS: 60" X 120", CONTROLLER: MULTICAM EZ CONTROL, POWER SOURCE: HYPERTHERM HPR130XD, MAX CUTTING CAPACITY: UP TO 1" THICK STEEL (PRODUCTION PIERCE), SEVERANCE CAPACITY: UP TO 1.25", DRIVE SYSTEM: PRECISION RACK AND PINION ON X AND Y AXES, BALL SCREW ON Z AXIS, TABLE: DOWNDRAFT OR OPTIONAL WATER TABLE, CUTTING SPEED: UP TO 1,200 IPM, POWER REQUIREMENTS: 480V, 3-PHASE, SOFTWARE COMPATIBILITY: COMPATIBLE WITH MAJOR CAD/CAM SOFTWARE. EQUIPPED WITH HYPERTHERM HPR130XD POWER SOURCE, ZEKS 10HSHA100 AIR DRYER. 2014 · MULTICAM · 3000	🔒 Subscribe
	STANDARD INDUSTRIAL	AB150-10	STANDARD INDUSTRIAL AB150-10 150 TON 10 FT CNC PRESS BRAKE W/ AUTOMEC AUTOGAUGE G24. S/N: F217-2400 STANDARD INDUSTRIAL · AB150-10	🔒 Subscribe
	GEKA	HYDROCROP 100	GEKA HYDROCROP 100 TON IRONWORKER. MO: HYD-100, CAPACITIES: 90O ANGLE - 6" X 6" X 1/2", RECTANGULAR BAR - 24" X 5/8", ROUND - 2", SQUARE - W/ SPECIAL BLADES: 90O ANGLE - 6" X 5/8", CHANNEL - 6", I-BEAM - 6" GEKA · HYDROCROP 100	🔒 Subscribe
	GEKA	HYDRACROP 70	GEKA HYDRACROP 70 TON IRONWORKER. MO: HYD-70-S, CAPACITIES: 90O ANGLE - 5" X 5" X 1/2", RECTANGULAR BAR - 18" X 5/8", ROUND - 1 3/4", SQUARE - 1 3/4", CHANNEL - 4 1/2", I-BEAM - 4 1/2" S/N: 1177 GEKA · HYDRACROP 70	🔒 Subscribe
	DAVIS	5 KEYSEATER	DAVIS MODEL 5 KEYSEATER W/ KEYWAY BROACH TOOLING. KEYWAY WIDTH CAPACITY: 1/16" TO 1-1/2", MAXIMUM LENGTH OF CUT (16" CUTTER): 3-1/2", MAXIMUM LENGTH OF CUT (20" CUTTER): 7-1/2", THROAT DEPTH (FACE OF CUTTER TO ARM POST): 17-1/2", MAXIMUM WORK HEIGHT: 12", TABLE DIMENSIONS: 31" X 30-1/4", TABLE MOVEMENT: 1-3/8", NUMBER OF T-SLOTS IN TABLE: 3, STROKES PER MINUTE: 48, TILT TABLE: YES, RESISTANCE BAR: YES, MOTOR POWER: 2 HP. EQUIPPED WITH TOOLING DAVIS · 5 KEYSEATER	🔒 Subscribe
	YALE	GLC040	YALE GLC040 4,000 LB. CAPACITY FORKLIFT. LIFT CAPACITY: 4,000 LBS, MAX LIFT HEIGHT: 186", BACK TILT: 5 DEGREES, TRUCK WEIGHT: 8,200 LBS, HOURS: 8962 YALE · GLC040	🔒 Subscribe
	VICTOR	20" X 80" GAP BED ENGINE LATHE	VICTOR 20" X 80" GAP BED ENGINE LATHE. SWING OVER BED: 20IN, DISTANCE BETWEEN CENTERS: 80IN, SWING OVER CROSS SLIDE: 12IN, AND A SWING IN GAP OF 29 IN, SPINDLE BORE: 3 1/8 INCHES, SPINDLE SPEED RANGE: 20-1,800 RPM WITH 12 SELECTABLE SPEEDS, MAIN MOTOR: 10 HP, AND THE BED WIDTH IS 14 INCHES. THREADING CAPABILITIES INCLUDE 2-72 TPI FOR INCH THREADS AND 0.2-14 MM FOR METRIC THREADS. FEED RANGE INCLUDES LONGITUDINAL FEED FROM 0.0012 TO 0.0315 IPR AND CROSS FEED FROM 0.0004 TO 0.011 IPR. THE TAILSTOCK QUILL HAS A TRAVEL OF 6 INCHES, A DIAMETER OF 3 INCHES, AND AN MT5 (MORSE TAPER #5) TAPER. VICTOR · 20" X 80" GAP BED ENGINE LATHE	🔒 Subscribe
			PALLET OF 2FT - 10FT STANDARD AND SHOPMADE PRESS BRAKE DIES.	🔒 Subscribe
	BRIDGEPORT	SERIES 2	BRIDGEPORT SERIES 2 VERTICAL MILLING MACHINE W/ DRO AND 6IN MACHINE VISE. TABLE SIZE OF 10 X 54 INCHES, TABLE TRAVEL (X-AXIS) OF 36 INCHES, SADDLE TRAVEL (Y-AXIS) OF 12 INCHES, QUILL TRAVEL (Z-AXIS) OF 5 INCHES, KNEE TRAVEL OF 16 INCHES, RAM TRAVEL OF 12 INCHES, SPINDLE TAPER OF R8 OR ISO-40 (DEPENDING ON MODEL), SPINDLE SPEED RANGE VARIABLE FROM 60 TO 4,200 RPM, MOTOR POWER OF 2 HP (STANDARD), WITH SOME MODELS OFFERING UP TO 3 HP, QUILL FEED RATES OF 0.0015, 0.003, AND 0.006 INCHES PER REVOLUTION, HEAD TILT OF 45 DEGREES LEFT AND RIGHT, 90 DEGREES FRONT AND BACK, AND A WEIGHT TYPICALLY AROUND 3,000 LBS. BRIDGEPORT · SERIES 2	🔒 Subscribe
	CHAMPION	VR5-8	CHAMPION VR5-8 TWO-STAGE 5 HP 80 GALLON AIR COMPRESSOR. HORSEPOWER: 5 HP, STAGES: TWO-STAGE, LUBRICATION: SPLASH-LUBRICATED, TANK SIZE: 80-GALLON VERTICAL, CFM AT 175 PSI: 17.3, OPERATING RPM: 734, VOLTAGE OPTIONS: 230V SINGLE-PHASE, 208V/230V/460V THREE-PHASE, CONTROL FEATURES: MOUNTED CONTROL PANEL, LOW OIL SHUTDOWN, ELECTRONIC TIMED TANK DRAIN, AFTERCOOLER: YES, VIBRATION ISOLATORS: YES, OIL: CHAMPLUB COMPRESSOR OIL PRE-FILLED, DIMENSIONS: 33" L X 24" W X 77" H, SHIPPING WEIGHT: 535 LBS. CHAMPION · VR5-8	🔒 Subscribe
	BRIDGEPORT	SERIES 1	BRIDGEPORT SERIES 1 2HP VERTICAL MILLING MACHINE. TABLE SIZE OF 9 X 42 INCHES, TABLE TRAVEL (X-AXIS) OF 30 INCHES, SADDLE TRAVEL (Y-AXIS) OF 12 INCHES, QUILL TRAVEL (Z-AXIS) OF 5 INCHES, KNEE TRAVEL OF 16 INCHES, RAM TRAVEL OF 12 INCHES, SPINDLE TAPER OF R8, SPINDLE SPEED RANGE VARIABLE FROM 60 TO 4,200 RPM, MOTOR POWER OF 2 HP, QUILL FEED RATES OF 0.0015, 0.003, AND 0.006 INCHES PER REVOLUTION, AND HEAD TILT OF 45 DEGREES LEFT AND RIGHT, 90 DEGREES FRONT AND BACK. BRIDGEPORT · SERIES 1	🔒 Subscribe
			(3) PALLETS OF 1FT - 5FT STANDARD AND SHOPMADE PRESS BRAKE DIES.	🔒 Subscribe
			TOOLBOX OF ASSORTED IRONWORKER PUNCH DIES.	🔒 Subscribe
	MILLER	SYNCROWAVE 250	MILLER SYNCROWAVE 250 WELDING POWER SOURCE W/ MILLER COOLMATE 3 . V: 200/230/460, A: 105.8/92/46, KW: 11.4, PH: 1, HZ: 60 MILLER · SYNCROWAVE 250	🔒 Subscribe
	REID	618 HYD	REID 618 HYD HYDRAULIC SURFACE GRINDER. WORK CAPACITY: 6" X 18", WORK HEIGHT UNDER 7" WHEEL: 15", MAXIMUM LONGITUDINAL TRAVEL: 20", MAXIMUM CROSS TRAVEL: 7", TABLE TRAVEL (LONG.) PER REV. OF HANDWHEEL: 2-5/16", CROSS FEED PER REV. OF HANDWHEEL: 0.125", VERTICAL TRAVEL PER REV. OF HANDWHEEL: 0.050", INF. VARIABLE POWER TABLE SPEEDS: 10 TO 125 FPM, AUTOMATIC CROSS FEED INCREMENT: 0.005 TO 0.250", GRINDING WHEEL SIZE: 7" X 1/2" X 1-1/4", APPROXIMATE WEIGHT: 2,500 LBS, EQUIPPED WITH: HYDRAULIC LONGITUDINAL & CROSS FEEDS, FINE FEED KNOB FOR CROSSFEED, SELF-CONTAINED HYDRAULIC SYSTEM, HEAVY, RIBBED CAST IRON CONSTRUCTION, AUTOMATIC LUBRICATION SYSTEM, 6" X 18" O.S. WALKER FINE-DIVISION PERMANENT MAGNETIC CHUCK, OVER-THE-WHEEL WHEEL DRESSER WITH MICROMETER ADJUSTMENT, COOLANT SYSTEM WITH TANK, PUMP, SPLASH GUARDS, ETC., 1 HP "REID" 3/60/230-460 VOLT DIRECT DRIVE, SUPER-PRECISION SPINDLE REID · 618 HYD	🔒 Subscribe
1987	SEIKI	XL 3VH	1987 SEIKI XL 3VH VARIABLE SPEED VERTICAL MILLING MACHINE W/ NEWALL DRO AND 6IN MACHINE VISE. TABLE SIZE OF 10 X 50 INCHES, TABLE TRAVEL (X-AXIS) OF 32 INCHES, SADDLE TRAVEL (Y-AXIS) OF 12 INCHES, QUILL TRAVEL (Z-AXIS) OF 5 INCHES, AND KNEE TRAVEL OF 16 INCHES. IT FEATURES AN R8 OR ISO-40 SPINDLE TAPER, DEPENDING ON THE MODEL, WITH A SPINDLE SPEED RANGE VARIABLE FROM 60 TO 4,200 RPM. THE MOTOR POWER IS 3 HP, AND THE QUILL FEED RATES ARE 0.0015, 0.003, AND 0.006 INCHES PER REVOLUTION S/N: 4696 1987 · SEIKI · XL 3VH	🔒 Subscribe
	DAKE	1-1/2B	DAKE 1-1/2B 3 TON ARBOR PRESS. CAPACITY: 3 TONS, LEVERAGE RATIO: 48:1, RAM SIZE: 1-1/4" X 1-1/4" X 24-1/2", MAXIMUM WORK DIAMETER: 14", THROAT DEPTH: 7", LARGEST ARBOR DIAMETER: 2", CAPACITY OVER TABLE: 18-1/4", CAPACITY OVER TABLE PLATE: 17-1/2", BASE DIMENSIONS: 21" X 8-1/4", OVERALL HEIGHT: 28", WEIGHT: 196 LBS, FEATURES: RATCHET DEVICE FOR CONVENIENT LEVER POSITIONING, COUNTERWEIGHT FOR QUICK LEVER RETURN, HANDWHEEL FOR RAPID RAM ADVANCEMENT DAKE · 1-1/2B	🔒 Subscribe
	JACOBS		PALLET OF JACOBS DRILL CHUCKS, BORING HEADS, COLLETS AND HOLD DOWN TOOLING JACOBS	🔒 Subscribe
	MILWAUKEE ELECTRIC	4262-1	MILWAUKEE ELECTRIC 4262-1 MAG DRILL, CAP: 3/4", V: 120, PH: 1, HZ: 60, RPM: 400, A: 11.5" S/N: 0005028558 MILWAUKEE ELECTRIC · 4262-1	🔒 Subscribe
			CONTENTS OF TOOLBOX - PRECISION MEASURING TOOLS, ENDMILLS, DRILL BITS, TOOL HOLDERS, TAPS, MILL CUTTERS, AND MORE. CONTENTS OF TOOLBOX - PRECISION MEASURING TOOLS, ENDMILLS, DRILL BITS, TOOL HOLDERS, TAPS, MILL CUTTERS, AND MORE	🔒 Subscribe
	KURT	6"	KURT 6" MACHINE VISES KURT · 6"	🔒 Subscribe
	THEMAC	J-45	THEMAC J-45 TOOL POST GRINDER IN CASE W/ ATTACHMENTS. MO: J-45, SN: 10057, V: 115, A: 4.5, HZ: 60, FULL LOAD SPEED: 10000 RPM THEMAC · J-45	🔒 Subscribe
			METAL ORGANIZER CABINET AND SOME ASSORTED DRILL BITS, END MILLS AND TAPS	🔒 Subscribe
	STARETT	199	STARETT 199 MASTER PRECISION LEVEL IN CASE. STARETT · 199	🔒 Subscribe
	STARRETT	436	STARRETT 436 MICROMETER SET. STARRETT · 436	🔒 Subscribe
	YUASA	550-052	YUASA 550-052 12" ROTARY TABLE AND ROTARY TABLE ATTACHMENT YUASA · 550-052	🔒 Subscribe
			FULL METAL ORGANIZER CABINET WITH ASSORTED DRILL BITS	🔒 Subscribe
	ENERPAC		ENERPAC HYDRAULIC BENDER W/ DIES ENERPAC	🔒 Subscribe
	KENNAMETAL		PALLET OF ASSORTED LATHE ATTACHMENTS, TOOL HOLDERS, CENTERS AND KENNAMETAL INDEXABLE INSERT TOOL HOLDERS KENNAMETAL	🔒 Subscribe
			3' X 2' GRANITE SURFACE PLATE. DIMS: 36" X 24" X 4"	🔒 Subscribe
			LOT OF VARIOUS REAMERS, END MILLS, TAPS AND CUTTING TOOLS	🔒 Subscribe
	DAYTON	1 TON HOIST	DAYTON 1 TON HOIST (RAIL NOT INCLUDED) . DAYTON · 1 TON HOIST	🔒 Subscribe
	DAYTON	500 LBS HOIST	DAYTON 500 LBS HOIST . STEEL BEAM SWING ARM INCLUDED DAYTON · 500 LBS HOIST	🔒 Subscribe
			BENCHTOP BELT SANDER W/ SPARE BELTS.	🔒 Subscribe
			PALLET OF METAL TOOL BOXES OF VARIOUS TAPS, TAP WRENCHES, MILL CUTTERS, END MILLS, DRILL BITS AND MORE	🔒 Subscribe
			PALLET OF APPROX. (15) VARIOUS LENGTH PONY POLE CLAMPS	🔒 Subscribe
	STARRETT	3' X 2'	STARRETT 3' X 2' GRANITE SURFACE PLATE. DIMS: 36" X 24" X 6" STARRETT · 3' X 2'	🔒 Subscribe
	VICTOR	MHT-100	VICTOR MHT-100 HAND TORCH IN CASE. VICTOR · MHT-100	🔒 Subscribe
			SHELF OF LATHE PARTS: COLLETS, TOOL HOLDERS, AND MORE.	🔒 Subscribe
		BS-250	BS-250 HORIZONTAL BAND SAW. MAX WIDTH: 415MM, MAX CUT HEIGHT: 250MM, BLADE HP: 2 HP BS-250	🔒 Subscribe
	LAGUN	REPUBLIC	LAGUN REPUBLIC VERTICAL MILLING MACHINE W/ PATHFINDER 5 DRO AND 6IN MILLING VISE. TABLE SIZE OF 10 X 50 INCHES, TABLE TRAVEL (X-AXIS) OF 34 INCHES, SADDLE TRAVEL (Y-AXIS) OF 16 INCHES, QUILL TRAVEL (Z-AXIS) OF 5 INCHES, KNEE TRAVEL OF 16 INCHES, RAM TRAVEL OF 22 INCHES, SPINDLE TAPER OF R8 OR #40 NST (DEPENDING ON MODEL), SPINDLE SPEED RANGE VARIABLE FROM 60 TO 4,200 RPM, MOTOR POWER OF 3 HP, QUILL FEED RATES OF 0.0015, 0.003, AND 0.006 INCHES PER REVOLUTION, AND HEAD TILT OF 90 DEGREES LEFT AND RIGHT, 45 DEGREES FRONT AND BACK. LAGUN · REPUBLIC	🔒 Subscribe
	BALDOR	7300	BALDOR 7300 PEDESTAL GRINDER. CAT NO: 7300, HP: 1/2, V: 115, PH: 1, A: 4.2, HZ: 60, RPM: 1450 BALDOR · 7300	🔒 Subscribe
	STARRETT	224	STARRETT 224 6" - 12" MICROMETER IN CASE. STARRETT · 224	🔒 Subscribe
	MILLER	CP 300	MILLER CP 300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE W/ MILLER S-22A WIRE FEEDER. MILLER · CP 300	🔒 Subscribe
			PALLET OF ASSORTED PNEUMATIC TOOLS.	🔒 Subscribe
	HYPERTHERM	MAX43	HYPERTHERM MAX43 PLASMA CUTTING SYSTEM S/N: MX43-00804, V: 208/240, A: 33, PH: 1, HZ: 50/60 HYPERTHERM · MAX43	🔒 Subscribe
			DEPTH AND ROD MICROMETERS	🔒 Subscribe
			32" X 32" TUMBLER DEBURRING MACHINE. MAX DEPTH: 32", WIDTH: 32"	🔒 Subscribe
	CRAFTSMAN	10 DRAWER	CRAFTSMAN 10 DRAWER TOOL CHEST AND CONTENTS CRAFTSMAN · 10 DRAWER	🔒 Subscribe
			BOX OF ASSORTED CARBIDE INSERTS. BOX OF ASSORTED CARBIDE INSERTS	🔒 Subscribe

Year	Make	Model	Description	Price
2014	MULTICAM	3000	2014 MULTICAM 3000 CNC PLASMA CUTTER. WEIGHT: APPROX. 4500 LBS, CUTTING AREA DIMENSIONS: 60" X 120", CONTROLLER: MULTICAM EZ CONTROL, POWER SOURCE: HYPERTHERM HPR130XD, MAX CUTTING CAPACITY: UP TO 1" THICK STEEL (PRODUCTION PIERCE), SEVERANCE CAPACITY: UP TO 1.25", DRIVE SYSTEM: PRECISION RACK AND PINION ON X AND Y AXES, BALL SCREW ON Z AXIS, TABLE: DOWNDRAFT OR OPTIONAL WATER TABLE, CUTTING SPEED: UP TO 1,200 IPM, POWER REQUIREMENTS: 480V, 3-PHASE, SOFTWARE COMPATIBILITY: COMPATIBLE WITH MAJOR CAD/CAM SOFTWARE. EQUIPPED WITH HYPERTHERM HPR130XD POWER SOURCE, ZEKS 10HSHA100 AIR DRYER.	🔒 Subscribe
	STANDARD INDUSTRIAL	AB150-10	STANDARD INDUSTRIAL AB150-10 150 TON 10 FT CNC PRESS BRAKE W/ AUTOMEC AUTOGAUGE G24. S/N: F217-2400	🔒 Subscribe
	GEKA	HYDROCROP 100	GEKA HYDROCROP 100 TON IRONWORKER. MO: HYD-100, CAPACITIES: 90O ANGLE - 6" X 6" X 1/2", RECTANGULAR BAR - 24" X 5/8", ROUND - 2", SQUARE - W/ SPECIAL BLADES: 90O ANGLE - 6" X 5/8", CHANNEL - 6", I-BEAM - 6"	🔒 Subscribe
	GEKA	HYDRACROP 70	GEKA HYDRACROP 70 TON IRONWORKER. MO: HYD-70-S, CAPACITIES: 90O ANGLE - 5" X 5" X 1/2", RECTANGULAR BAR - 18" X 5/8", ROUND - 1 3/4", SQUARE - 1 3/4", CHANNEL - 4 1/2", I-BEAM - 4 1/2" S/N: 1177	🔒 Subscribe
	DAVIS	5 KEYSEATER	DAVIS MODEL 5 KEYSEATER W/ KEYWAY BROACH TOOLING. KEYWAY WIDTH CAPACITY: 1/16" TO 1-1/2", MAXIMUM LENGTH OF CUT (16" CUTTER): 3-1/2", MAXIMUM LENGTH OF CUT (20" CUTTER): 7-1/2", THROAT DEPTH (FACE OF CUTTER TO ARM POST): 17-1/2", MAXIMUM WORK HEIGHT: 12", TABLE DIMENSIONS: 31" X 30-1/4", TABLE MOVEMENT: 1-3/8", NUMBER OF T-SLOTS IN TABLE: 3, STROKES PER MINUTE: 48, TILT TABLE: YES, RESISTANCE BAR: YES, MOTOR POWER: 2 HP. EQUIPPED WITH TOOLING	🔒 Subscribe
	YALE	GLC040	YALE GLC040 4,000 LB. CAPACITY FORKLIFT. LIFT CAPACITY: 4,000 LBS, MAX LIFT HEIGHT: 186", BACK TILT: 5 DEGREES, TRUCK WEIGHT: 8,200 LBS, HOURS: 8962	🔒 Subscribe
	VICTOR	20" X 80" GAP BED ENGINE LATHE	VICTOR 20" X 80" GAP BED ENGINE LATHE. SWING OVER BED: 20IN, DISTANCE BETWEEN CENTERS: 80IN, SWING OVER CROSS SLIDE: 12IN, AND A SWING IN GAP OF 29 IN, SPINDLE BORE: 3 1/8 INCHES, SPINDLE SPEED RANGE: 20-1,800 RPM WITH 12 SELECTABLE SPEEDS, MAIN MOTOR: 10 HP, AND THE BED WIDTH IS 14 INCHES. THREADING CAPABILITIES INCLUDE 2-72 TPI FOR INCH THREADS AND 0.2-14 MM FOR METRIC THREADS. FEED RANGE INCLUDES LONGITUDINAL FEED FROM 0.0012 TO 0.0315 IPR AND CROSS FEED FROM 0.0004 TO 0.011 IPR. THE TAILSTOCK QUILL HAS A TRAVEL OF 6 INCHES, A DIAMETER OF 3 INCHES, AND AN MT5 (MORSE TAPER #5) TAPER.	🔒 Subscribe
			PALLET OF 2FT - 10FT STANDARD AND SHOPMADE PRESS BRAKE DIES.	🔒 Subscribe
	BRIDGEPORT	SERIES 2	BRIDGEPORT SERIES 2 VERTICAL MILLING MACHINE W/ DRO AND 6IN MACHINE VISE. TABLE SIZE OF 10 X 54 INCHES, TABLE TRAVEL (X-AXIS) OF 36 INCHES, SADDLE TRAVEL (Y-AXIS) OF 12 INCHES, QUILL TRAVEL (Z-AXIS) OF 5 INCHES, KNEE TRAVEL OF 16 INCHES, RAM TRAVEL OF 12 INCHES, SPINDLE TAPER OF R8 OR ISO-40 (DEPENDING ON MODEL), SPINDLE SPEED RANGE VARIABLE FROM 60 TO 4,200 RPM, MOTOR POWER OF 2 HP (STANDARD), WITH SOME MODELS OFFERING UP TO 3 HP, QUILL FEED RATES OF 0.0015, 0.003, AND 0.006 INCHES PER REVOLUTION, HEAD TILT OF 45 DEGREES LEFT AND RIGHT, 90 DEGREES FRONT AND BACK, AND A WEIGHT TYPICALLY AROUND 3,000 LBS.	🔒 Subscribe
	CHAMPION	VR5-8	CHAMPION VR5-8 TWO-STAGE 5 HP 80 GALLON AIR COMPRESSOR. HORSEPOWER: 5 HP, STAGES: TWO-STAGE, LUBRICATION: SPLASH-LUBRICATED, TANK SIZE: 80-GALLON VERTICAL, CFM AT 175 PSI: 17.3, OPERATING RPM: 734, VOLTAGE OPTIONS: 230V SINGLE-PHASE, 208V/230V/460V THREE-PHASE, CONTROL FEATURES: MOUNTED CONTROL PANEL, LOW OIL SHUTDOWN, ELECTRONIC TIMED TANK DRAIN, AFTERCOOLER: YES, VIBRATION ISOLATORS: YES, OIL: CHAMPLUB COMPRESSOR OIL PRE-FILLED, DIMENSIONS: 33" L X 24" W X 77" H, SHIPPING WEIGHT: 535 LBS.	🔒 Subscribe
	BRIDGEPORT	SERIES 1	BRIDGEPORT SERIES 1 2HP VERTICAL MILLING MACHINE. TABLE SIZE OF 9 X 42 INCHES, TABLE TRAVEL (X-AXIS) OF 30 INCHES, SADDLE TRAVEL (Y-AXIS) OF 12 INCHES, QUILL TRAVEL (Z-AXIS) OF 5 INCHES, KNEE TRAVEL OF 16 INCHES, RAM TRAVEL OF 12 INCHES, SPINDLE TAPER OF R8, SPINDLE SPEED RANGE VARIABLE FROM 60 TO 4,200 RPM, MOTOR POWER OF 2 HP, QUILL FEED RATES OF 0.0015, 0.003, AND 0.006 INCHES PER REVOLUTION, AND HEAD TILT OF 45 DEGREES LEFT AND RIGHT, 90 DEGREES FRONT AND BACK.	🔒 Subscribe
			(3) PALLETS OF 1FT - 5FT STANDARD AND SHOPMADE PRESS BRAKE DIES.	🔒 Subscribe
			TOOLBOX OF ASSORTED IRONWORKER PUNCH DIES.	🔒 Subscribe
	MILLER	SYNCROWAVE 250	MILLER SYNCROWAVE 250 WELDING POWER SOURCE W/ MILLER COOLMATE 3 . V: 200/230/460, A: 105.8/92/46, KW: 11.4, PH: 1, HZ: 60	🔒 Subscribe
	REID	618 HYD	REID 618 HYD HYDRAULIC SURFACE GRINDER. WORK CAPACITY: 6" X 18", WORK HEIGHT UNDER 7" WHEEL: 15", MAXIMUM LONGITUDINAL TRAVEL: 20", MAXIMUM CROSS TRAVEL: 7", TABLE TRAVEL (LONG.) PER REV. OF HANDWHEEL: 2-5/16", CROSS FEED PER REV. OF HANDWHEEL: 0.125", VERTICAL TRAVEL PER REV. OF HANDWHEEL: 0.050", INF. VARIABLE POWER TABLE SPEEDS: 10 TO 125 FPM, AUTOMATIC CROSS FEED INCREMENT: 0.005 TO 0.250", GRINDING WHEEL SIZE: 7" X 1/2" X 1-1/4", APPROXIMATE WEIGHT: 2,500 LBS, EQUIPPED WITH: HYDRAULIC LONGITUDINAL & CROSS FEEDS, FINE FEED KNOB FOR CROSSFEED, SELF-CONTAINED HYDRAULIC SYSTEM, HEAVY, RIBBED CAST IRON CONSTRUCTION, AUTOMATIC LUBRICATION SYSTEM, 6" X 18" O.S. WALKER FINE-DIVISION PERMANENT MAGNETIC CHUCK, OVER-THE-WHEEL WHEEL DRESSER WITH MICROMETER ADJUSTMENT, COOLANT SYSTEM WITH TANK, PUMP, SPLASH GUARDS, ETC., 1 HP "REID" 3/60/230-460 VOLT DIRECT DRIVE, SUPER-PRECISION SPINDLE	🔒 Subscribe
1987	SEIKI	XL 3VH	1987 SEIKI XL 3VH VARIABLE SPEED VERTICAL MILLING MACHINE W/ NEWALL DRO AND 6IN MACHINE VISE. TABLE SIZE OF 10 X 50 INCHES, TABLE TRAVEL (X-AXIS) OF 32 INCHES, SADDLE TRAVEL (Y-AXIS) OF 12 INCHES, QUILL TRAVEL (Z-AXIS) OF 5 INCHES, AND KNEE TRAVEL OF 16 INCHES. IT FEATURES AN R8 OR ISO-40 SPINDLE TAPER, DEPENDING ON THE MODEL, WITH A SPINDLE SPEED RANGE VARIABLE FROM 60 TO 4,200 RPM. THE MOTOR POWER IS 3 HP, AND THE QUILL FEED RATES ARE 0.0015, 0.003, AND 0.006 INCHES PER REVOLUTION S/N: 4696	🔒 Subscribe
	DAKE	1-1/2B	DAKE 1-1/2B 3 TON ARBOR PRESS. CAPACITY: 3 TONS, LEVERAGE RATIO: 48:1, RAM SIZE: 1-1/4" X 1-1/4" X 24-1/2", MAXIMUM WORK DIAMETER: 14", THROAT DEPTH: 7", LARGEST ARBOR DIAMETER: 2", CAPACITY OVER TABLE: 18-1/4", CAPACITY OVER TABLE PLATE: 17-1/2", BASE DIMENSIONS: 21" X 8-1/4", OVERALL HEIGHT: 28", WEIGHT: 196 LBS, FEATURES: RATCHET DEVICE FOR CONVENIENT LEVER POSITIONING, COUNTERWEIGHT FOR QUICK LEVER RETURN, HANDWHEEL FOR RAPID RAM ADVANCEMENT	🔒 Subscribe
	JACOBS		PALLET OF JACOBS DRILL CHUCKS, BORING HEADS, COLLETS AND HOLD DOWN TOOLING	🔒 Subscribe
	MILWAUKEE ELECTRIC	4262-1	MILWAUKEE ELECTRIC 4262-1 MAG DRILL, CAP: 3/4", V: 120, PH: 1, HZ: 60, RPM: 400, A: 11.5" S/N: 0005028558	🔒 Subscribe
			CONTENTS OF TOOLBOX - PRECISION MEASURING TOOLS, ENDMILLS, DRILL BITS, TOOL HOLDERS, TAPS, MILL CUTTERS, AND MORE. CONTENTS OF TOOLBOX - PRECISION MEASURING TOOLS, ENDMILLS, DRILL BITS, TOOL HOLDERS, TAPS, MILL CUTTERS, AND MORE	🔒 Subscribe
	KURT	6"	KURT 6" MACHINE VISES	🔒 Subscribe
	THEMAC	J-45	THEMAC J-45 TOOL POST GRINDER IN CASE W/ ATTACHMENTS. MO: J-45, SN: 10057, V: 115, A: 4.5, HZ: 60, FULL LOAD SPEED: 10000 RPM	🔒 Subscribe
			METAL ORGANIZER CABINET AND SOME ASSORTED DRILL BITS, END MILLS AND TAPS	🔒 Subscribe
	STARETT	199	STARETT 199 MASTER PRECISION LEVEL IN CASE.	🔒 Subscribe
	STARRETT	436	STARRETT 436 MICROMETER SET.	🔒 Subscribe
	YUASA	550-052	YUASA 550-052 12" ROTARY TABLE AND ROTARY TABLE ATTACHMENT	🔒 Subscribe
			FULL METAL ORGANIZER CABINET WITH ASSORTED DRILL BITS	🔒 Subscribe
	ENERPAC		ENERPAC HYDRAULIC BENDER W/ DIES	🔒 Subscribe
	KENNAMETAL		PALLET OF ASSORTED LATHE ATTACHMENTS, TOOL HOLDERS, CENTERS AND KENNAMETAL INDEXABLE INSERT TOOL HOLDERS	🔒 Subscribe
			3' X 2' GRANITE SURFACE PLATE. DIMS: 36" X 24" X 4"	🔒 Subscribe
			LOT OF VARIOUS REAMERS, END MILLS, TAPS AND CUTTING TOOLS	🔒 Subscribe
	DAYTON	1 TON HOIST	DAYTON 1 TON HOIST (RAIL NOT INCLUDED) .	🔒 Subscribe
	DAYTON	500 LBS HOIST	DAYTON 500 LBS HOIST . STEEL BEAM SWING ARM INCLUDED	🔒 Subscribe
			BENCHTOP BELT SANDER W/ SPARE BELTS.	🔒 Subscribe
			PALLET OF METAL TOOL BOXES OF VARIOUS TAPS, TAP WRENCHES, MILL CUTTERS, END MILLS, DRILL BITS AND MORE	🔒 Subscribe
			PALLET OF APPROX. (15) VARIOUS LENGTH PONY POLE CLAMPS	🔒 Subscribe
	STARRETT	3' X 2'	STARRETT 3' X 2' GRANITE SURFACE PLATE. DIMS: 36" X 24" X 6"	🔒 Subscribe
	VICTOR	MHT-100	VICTOR MHT-100 HAND TORCH IN CASE.	🔒 Subscribe
			SHELF OF LATHE PARTS: COLLETS, TOOL HOLDERS, AND MORE.	🔒 Subscribe
		BS-250	BS-250 HORIZONTAL BAND SAW. MAX WIDTH: 415MM, MAX CUT HEIGHT: 250MM, BLADE HP: 2 HP	🔒 Subscribe
	LAGUN	REPUBLIC	LAGUN REPUBLIC VERTICAL MILLING MACHINE W/ PATHFINDER 5 DRO AND 6IN MILLING VISE. TABLE SIZE OF 10 X 50 INCHES, TABLE TRAVEL (X-AXIS) OF 34 INCHES, SADDLE TRAVEL (Y-AXIS) OF 16 INCHES, QUILL TRAVEL (Z-AXIS) OF 5 INCHES, KNEE TRAVEL OF 16 INCHES, RAM TRAVEL OF 22 INCHES, SPINDLE TAPER OF R8 OR #40 NST (DEPENDING ON MODEL), SPINDLE SPEED RANGE VARIABLE FROM 60 TO 4,200 RPM, MOTOR POWER OF 3 HP, QUILL FEED RATES OF 0.0015, 0.003, AND 0.006 INCHES PER REVOLUTION, AND HEAD TILT OF 90 DEGREES LEFT AND RIGHT, 45 DEGREES FRONT AND BACK.	🔒 Subscribe
	BALDOR	7300	BALDOR 7300 PEDESTAL GRINDER. CAT NO: 7300, HP: 1/2, V: 115, PH: 1, A: 4.2, HZ: 60, RPM: 1450	🔒 Subscribe
	STARRETT	224	STARRETT 224 6" - 12" MICROMETER IN CASE.	🔒 Subscribe
	MILLER	CP 300	MILLER CP 300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE W/ MILLER S-22A WIRE FEEDER.	🔒 Subscribe
			PALLET OF ASSORTED PNEUMATIC TOOLS.	🔒 Subscribe
	HYPERTHERM	MAX43	HYPERTHERM MAX43 PLASMA CUTTING SYSTEM S/N: MX43-00804, V: 208/240, A: 33, PH: 1, HZ: 50/60	🔒 Subscribe
			DEPTH AND ROD MICROMETERS	🔒 Subscribe
			32" X 32" TUMBLER DEBURRING MACHINE. MAX DEPTH: 32", WIDTH: 32"	🔒 Subscribe
	CRAFTSMAN	10 DRAWER	CRAFTSMAN 10 DRAWER TOOL CHEST AND CONTENTS	🔒 Subscribe
			BOX OF ASSORTED CARBIDE INSERTS. BOX OF ASSORTED CARBIDE INSERTS	🔒 Subscribe

2014 MULTICAM 3000

CNC MACHINE CENTERS

2014 MULTICAM 3000 CNC PLASMA CUTTER. WEIGHT: APPROX. 4500 LBS, CUTTING AREA DIMENSIONS: 60" X 120",...

Hammer Price: 🔒

STANDARD INDUSTRIAL AB150-10

PRESSES & FORMING

STANDARD INDUSTRIAL AB150-10 150 TON 10 FT CNC PRESS BRAKE W/ AUTOMEC AUTOGAUGE G24. S/N: F217-2400...

Hammer Price: 🔒

GEKA HYDROCROP 100

METALWORKING & FABRICATION EQUIPMENT

GEKA HYDROCROP 100 TON IRONWORKER. MO: HYD-100, CAPACITIES: 90O ANGLE - 6" X 6" X 1/2", RECTANGULAR ...

Hammer Price: 🔒

GEKA HYDRACROP 70

METALWORKING & FABRICATION EQUIPMENT

GEKA HYDRACROP 70 TON IRONWORKER. MO: HYD-70-S, CAPACITIES: 90O ANGLE - 5" X 5" X 1/2", RECTANGULAR ...

Hammer Price: 🔒

DAVIS 5 KEYSEATER

METALWORKING & FABRICATION EQUIPMENT

DAVIS MODEL 5 KEYSEATER W/ KEYWAY BROACH TOOLING. KEYWAY WIDTH CAPACITY: 1/16" TO 1-1/2", MAXIMUM LE...

Hammer Price: 🔒

YALE GLC040

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

YALE GLC040 4,000 LB. CAPACITY FORKLIFT. LIFT CAPACITY: 4,000 LBS, MAX LIFT HEIGHT: 186", BACK TILT:...

Hammer Price: 🔒

VICTOR 20" X 80" GAP BED ENGINE LATHE

METALWORKING & FABRICATION EQUIPMENT

VICTOR 20" X 80" GAP BED ENGINE LATHE. SWING OVER BED: 20IN, DISTANCE BETWEEN CENTERS: 80IN, SWING O...

Hammer Price: 🔒

PRESSES & FORMING

PALLET OF 2FT - 10FT STANDARD AND SHOPMADE PRESS BRAKE DIES....

Hammer Price: 🔒

BRIDGEPORT SERIES 2

CNC MACHINE CENTERS

BRIDGEPORT SERIES 2 VERTICAL MILLING MACHINE W/ DRO AND 6IN MACHINE VISE. TABLE SIZE OF 10 X 54 INCH...

Hammer Price: 🔒

CHAMPION VR5-8

AIR COMPRESSORS

CHAMPION VR5-8 TWO-STAGE 5 HP 80 GALLON AIR COMPRESSOR. HORSEPOWER: 5 HP, STAGES: TWO-STAGE, LUBRICA...

Hammer Price: 🔒

BRIDGEPORT SERIES 1

CNC MACHINE CENTERS

BRIDGEPORT SERIES 1 2HP VERTICAL MILLING MACHINE. TABLE SIZE OF 9 X 42 INCHES, TABLE TRAVEL (X-AXIS)...

Hammer Price: 🔒

PRESSES & FORMING

(3) PALLETS OF 1FT - 5FT STANDARD AND SHOPMADE PRESS BRAKE DIES....

Hammer Price: 🔒

MISC

TOOLBOX OF ASSORTED IRONWORKER PUNCH DIES....

Hammer Price: 🔒

MILLER SYNCROWAVE 250

WELDING & CUTTING

MILLER SYNCROWAVE 250 WELDING POWER SOURCE W/ MILLER COOLMATE 3 . V: 200/230/460, A: 105.8/92/46, KW...

Hammer Price: 🔒

REID 618 HYD

METALWORKING & FABRICATION EQUIPMENT

REID 618 HYD HYDRAULIC SURFACE GRINDER. WORK CAPACITY: 6" X 18", WORK HEIGHT UNDER 7" WHEEL: 15", MA...

Hammer Price: 🔒

1987 SEIKI XL 3VH

CNC MACHINE CENTERS

1987 SEIKI XL 3VH VARIABLE SPEED VERTICAL MILLING MACHINE W/ NEWALL DRO AND 6IN MACHINE VISE. TABLE ...

Hammer Price: 🔒

DAKE 1-1/2B

PRESSES & FORMING

DAKE 1-1/2B 3 TON ARBOR PRESS. CAPACITY: 3 TONS, LEVERAGE RATIO: 48:1, RAM SIZE: 1-1/4" X 1-1/4" X 2...

Hammer Price: 🔒

JACOBS

POWER AND HAND TOOLS

PALLET OF JACOBS DRILL CHUCKS, BORING HEADS, COLLETS AND HOLD DOWN TOOLING...

Hammer Price: 🔒

MILWAUKEE ELECTRIC 4262-1

POWER AND HAND TOOLS

MILWAUKEE ELECTRIC 4262-1 MAG DRILL, CAP: 3/4", V: 120, PH: 1, HZ: 60, RPM: 400, A: 11.5" S/N: 00050...

Hammer Price: 🔒

MISC

CONTENTS OF TOOLBOX - PRECISION MEASURING TOOLS, ENDMILLS, DRILL BITS, TOOL HOLDERS, TAPS, MILL CUTT...

Hammer Price: 🔒

KURT 6"

POWER AND HAND TOOLS

KURT 6" MACHINE VISES...

Hammer Price: 🔒

THEMAC J-45

METALWORKING & FABRICATION EQUIPMENT

THEMAC J-45 TOOL POST GRINDER IN CASE W/ ATTACHMENTS. MO: J-45, SN: 10057, V: 115, A: 4.5, HZ: 60, F...

Hammer Price: 🔒

MISC

METAL ORGANIZER CABINET AND SOME ASSORTED DRILL BITS, END MILLS AND TAPS...

Hammer Price: 🔒

STARETT 199

TEST, MEASUREMENT & QUALITY EQUIPMENT

STARETT 199 MASTER PRECISION LEVEL IN CASE....

Hammer Price: 🔒

STARRETT 436

TEST, MEASUREMENT & QUALITY EQUIPMENT

STARRETT 436 MICROMETER SET....

Hammer Price: 🔒

YUASA 550-052

CNC MACHINE CENTERS

YUASA 550-052 12" ROTARY TABLE AND ROTARY TABLE ATTACHMENT...

Hammer Price: 🔒

MISC

FULL METAL ORGANIZER CABINET WITH ASSORTED DRILL BITS...

Hammer Price: 🔒

ENERPAC

METALWORKING & FABRICATION EQUIPMENT

ENERPAC HYDRAULIC BENDER W/ DIES...

Hammer Price: 🔒

KENNAMETAL

METALWORKING & FABRICATION EQUIPMENT

PALLET OF ASSORTED LATHE ATTACHMENTS, TOOL HOLDERS, CENTERS AND KENNAMETAL INDEXABLE INSERT TOOL HOL...

Hammer Price: 🔒

TEST, MEASUREMENT & QUALITY EQUIPMENT

3' X 2' GRANITE SURFACE PLATE. DIMS: 36" X 24" X 4"...

Hammer Price: 🔒

POWER AND HAND TOOLS

LOT OF VARIOUS REAMERS, END MILLS, TAPS AND CUTTING TOOLS...

Hammer Price: 🔒

DAYTON 1 TON HOIST

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

DAYTON 1 TON HOIST (RAIL NOT INCLUDED) ....

Hammer Price: 🔒

DAYTON 500 LBS HOIST

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

DAYTON 500 LBS HOIST . STEEL BEAM SWING ARM INCLUDED...

Hammer Price: 🔒

MISC

BENCHTOP BELT SANDER W/ SPARE BELTS....

Hammer Price: 🔒

POWER AND HAND TOOLS

PALLET OF METAL TOOL BOXES OF VARIOUS TAPS, TAP WRENCHES, MILL CUTTERS, END MILLS, DRILL BITS AND MO...

Hammer Price: 🔒

MISC

PALLET OF APPROX. (15) VARIOUS LENGTH PONY POLE CLAMPS...

Hammer Price: 🔒

STARRETT 3' X 2'

TEST, MEASUREMENT & QUALITY EQUIPMENT

STARRETT 3' X 2' GRANITE SURFACE PLATE. DIMS: 36" X 24" X 6"...

Hammer Price: 🔒

VICTOR MHT-100

WELDING & CUTTING

VICTOR MHT-100 HAND TORCH IN CASE....

Hammer Price: 🔒

MISC

SHELF OF LATHE PARTS: COLLETS, TOOL HOLDERS, AND MORE....

Hammer Price: 🔒

BS-250

WOODWORKING EQUIPMENT

BS-250 HORIZONTAL BAND SAW. MAX WIDTH: 415MM, MAX CUT HEIGHT: 250MM, BLADE HP: 2 HP...

Hammer Price: 🔒

LAGUN REPUBLIC

CNC MACHINE CENTERS

LAGUN REPUBLIC VERTICAL MILLING MACHINE W/ PATHFINDER 5 DRO AND 6IN MILLING VISE. TABLE SIZE OF 10 X...

Hammer Price: 🔒

BALDOR 7300

MISC

BALDOR 7300 PEDESTAL GRINDER. CAT NO: 7300, HP: 1/2, V: 115, PH: 1, A: 4.2, HZ: 60, RPM: 1450...

Hammer Price: 🔒

STARRETT 224

TEST, MEASUREMENT & QUALITY EQUIPMENT

STARRETT 224 6" - 12" MICROMETER IN CASE....

Hammer Price: 🔒

MILLER CP 300

WELDING & CUTTING

MILLER CP 300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE W/ MILLER S-22A WIRE FEEDER....

Hammer Price: 🔒

POWER AND HAND TOOLS

PALLET OF ASSORTED PNEUMATIC TOOLS....

Hammer Price: 🔒

HYPERTHERM MAX43

WELDING & CUTTING

HYPERTHERM MAX43 PLASMA CUTTING SYSTEM S/N: MX43-00804, V: 208/240, A: 33, PH: 1, HZ: 50/60...

Hammer Price: 🔒

TEST, MEASUREMENT & QUALITY EQUIPMENT

DEPTH AND ROD MICROMETERS...

Hammer Price: 🔒

SURFACE FINISHING EQUIPMENT

32" X 32" TUMBLER DEBURRING MACHINE. MAX DEPTH: 32", WIDTH: 32"...

Hammer Price: 🔒

CRAFTSMAN 10 DRAWER

POWER AND HAND TOOLS

CRAFTSMAN 10 DRAWER TOOL CHEST AND CONTENTS...

Hammer Price: 🔒

MISC

BOX OF ASSORTED CARBIDE INSERTS. BOX OF ASSORTED CARBIDE INSERTS...

Hammer Price: 🔒

1 2 3 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

TechCraft Inc Complete Machining and Fabrication Shop

Save to Project Folder

Print Options

Save to Project Folder