Surplus Process Industrial Machinery Auction

Revelation Auctions

Category: CHEMICAL PROCESSING EQUIPMENT

Total Lots: 143

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 143 lots

Year	Make	Model	Lot Description	Hammer Price
2019	HOLLOWAY / PRECISION	316L STAINLESS STEEL REACTOR	2019 HOLLOWAY / PRECISION 316L STAINLESS STEEL REACTOR - DUAL AGITATION, SWEEP/TURBINE -CAPACITY: 225 GALLON -CONSTRUCTION: 316L STAINLESS STEEL -VESSEL RATING: 35 PSI @ 300F -JACKET RATING: 200 PSI @ 300F -DUAL AGITATION: TURBINE -BOTTOM AGITATION: SWEEP -TEMP PROBE -12 MANWAY WITH SIGHT GLASS (3) 3.5 CENTER, 12 FOR AGITATOR -OFF CENTER TURBINE -ALL DRIVE WASH DOWN COVERED WITH STAINLESS STEEL -2 CBO -ELECTRO POLISHED 2019 · HOLLOWAY / PRECISION · 316L STAINLESS STEEL REACTOR	🔒 Subscribe
2003	OKUMA	TWINSTAR LT200-M	2003 OKUMA TWINSTAR LT200-M: EQUIPPED WITH, CHIP CONVEYOR, IEMCA VIP 80 E BAR FEEDER SPECS: SWING OVER SADDLE: 15.75 INCHES. DISTANCE BETWEEN SPINDLES: 37.8 INCHES. MAXIMUM CUTTING DIAMETER: 8.27 INCHES. XA/XB TRAVEL: 7.56 INCHES. ZA/ZB TRAVEL: 27.56 INCHES. SPINDLE NOSE (MAIN/SUB): A2-6 / A2-6. BORE DIAMETER: 2.44 INCHES. BAR WORK CAPACITY: 2.0 INCHES. RANGE OF SPINDLE SPEED (MAIN & SUB): 4500 RPM. C-AXIS INDEXING (MAIN & SUB): 0.001 DEGREES. Y-AXIS TRAVEL: +1.65 INCHES / -1.97 INCHES. TURRETS: 12-POSITION MAIN TURRET AND 12-POSITION SECONDARY TURRET. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY. 2003 · OKUMA · TWINSTAR LT200-M	🔒 Subscribe
2014	HARDINGE	GX 1600	2014 HARDINGE GX 1600 CNC VMC (KNOWN Z AXIS ELECTRICAL/DRIVE ISSUE) - 2014 HARDINGE GX 1600 CNC VERTICAL MACHINING CENTER (KNOWN Z AXIS ELECTRICAL/DRIVE ISSUE) SPECS: X-AXIS TRAVEL 62.9" Y-AXIS TRAVEL 27.5" Z-AXIS TRAVEL 25" TABLE SIZE 27.5" X 67" TABLE LOAD CAPACITY 3,300 LBS SPINDLE SPEED 6,000 RPM SPINDLE TAPER CAT 50 SPINDLE MOTOR POWER 25 HP TOOL MAGAZINE CAPACITY 30 TOOLS FEED RATES (ALL AXES) 0.1 - 472 IPM RAPID TRAVERSE RATE 1,147 IPM MAX/MIN CLEARANCE FROM TABLETOP TO SPINDLE NOSE 31.1" / 6.1" MACHINE DIMENSIONS (L X W X H) 153.5" X 107.2" X 113.3" MACHINE WEIGHT APPROXIMATELY 21,560 LBS CONTROL SYSTEM FANUC OIMD POWER REQUIREMENT 380-440V, 3-PHASE, 60 HZ 2014 · HARDINGE · GX 1600	🔒 Subscribe
	TIMESAVER		TIMESAVER TIMESAVER	🔒 Subscribe
	AUTO-SERT	AS-7.5	[20] AUTO-SERT AS-7.5 20" HYDRAULIC INSERTION PRESS AS-7.5/20" THROAT TONNAGE CAPACITY: MINIMUM 350 LBS. MAXIMUM 15,000 LBS. THROAT DEPTH TO BACK: 20" (508MM) THROAT DEPTH TO TOP: 20" (508MM) RAM STROKE: 6" (152MM) HYDRAULIC PRESSURE: MINIMUM 40 P.S.I. MAXIMUM 3,000 P.S.I. OIL RESERVOIR CAPACITY: 12 GALLONS (45.42 LIT.) ELECTRICAL SPECS: 208/230/415/460/575 V 3 PHASE 50/60 HZ HEIGHT: 79" (2007MM) WIDTH: 36" (914MM) DEPTH: 45" (1143MM) WEIGHT: 1900 LBS. (862KGS.) AUTO-SERT · AS-7.5	🔒 Subscribe
	LINDE	H40T	LINDE H40T 8000LB FORKLIFT (PROPANE) DRIVES BUT LOSES HYDRAULIC POWER DUE TO LEAKING RAMS REQUIRING EXTENSIVE SERVICING LINDE · H40T	🔒 Subscribe
1997	HAAS	VF3	1997 HAAS VF3 VERTICAL MACHINING CENTER AXIS TRAVEL: X-AXIS: 40 INCHES Y-AXIS: 20 INCHES Z-AXIS: 25 INCHES TABLE: TABLE SIZE: 48 INCHES X 18 INCHES MAXIMUM TABLE LOAD: APPROXIMATELY 3,500 LBS SPINDLE: SPINDLE MOTOR: 15 HP SPINDLE SPEED: VARIES, OFTEN AROUND 7,500 OR 8,100 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: TOOL CAPACITY: 20 ATC (AUTOMATIC TOOL CHANGER) RAPID TRAVERSE: VALUES VARY, BUT OFTEN AROUND 710 IPM, OR IN SOME CASES 1000 IPM. WEIGHT: APPROXIMATELY 11,720 TO 12,500 LBS. 1997 · HAAS · VF3	🔒 Subscribe
1996	BEP	FP-80500	1996 BEP FP-80500 CENTRIFUGE PREVIOUSLY USED FOR CHERRIES IN A CANDY MAKING OPERATION 1200 MAX RPM PERFORATED BASKET 460V 1996 · BEP · FP-80500	🔒 Subscribe
2023	BIG ASS	BASIC 6 HVLS	2023 BIG ASS BASIC 6 HVLS 24' INDUSTRIAL FAN ENVIRONMENT INDOOR (DRY) DIAMETER 24 FT DOWNROD LENGTH / CEILING HEIGHT 2 FT. EXTENSION TUBE 400-480V/3 PHASE 2 HP >725W AFRS 2023 · BIG ASS · BASIC 6 HVLS	🔒 Subscribe
			COIL TIPPER	🔒 Subscribe
	SECO	UNCOILER	SECO UNCOILER SECO · UNCOILER	🔒 Subscribe
2006	MAKINO	S56	2006 MAKINO S56 VERTICAL MACHINING CENTER EQUIPPED WITH: THRU SPINDLE COOLANT BLUM LASER TOOL LENGTH, DIAMETER SET X AXIS TRAVEL 35.4" Y AXIS TRAVEL 19.7" Z AXIS TRAVEL 19.7" CUTTING FEED RATE 1574 IPM RAPID TRAVERSE 1574 IPM TABLE DIMENSIONS 19.7" X 39.4" SPINDLE MOTOR 30 HP SPINDLE SPEED 20,000 RPM ATC CAPACITY 20 SPINDLE TAPER HSK63 # AXIS 3 THERE IS AN ERROR ON THE XY BOARD THAT NEEDS TO BE SWITCHED OUT. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY. 2006 · MAKINO · S56	🔒 Subscribe
	CHICAGO		90 TON CHICAGO PRESS BRAKE CHICAGO	🔒 Subscribe
			COIL TIPPER	🔒 Subscribe
			TIPPER	🔒 Subscribe
2012	OBJET	EDEN350V	2012 OBJET EDEN350V 3D PRINTER BUILD SIZE: 13.4" X 13.4" X 7.9" LAYER THICKNESS: HORIZONTAL BUILD LAYERS DOWN TO 16-MICRONS 0.0006" WORKSTATION COMPATIBILITY: WINDOWS 7 32/64-BIT NETWORK CONNECTIVITY: LAN TCP/IP SIZE AND WEIGHT: 52.0" X 39.0" X 47.25" OBJET EDEN350V: 902 LBS POWER REQUIREMENTS: 110240 VAC 50/60 HZ; 1.5 KW SINGLE PHASE REGULATORY COMPLIANCE: CE, FCC SPECIAL FACILITY REQUIREMENTS: TEMPERATURE 18-25 C (64-77 F); RELATIVE HUMIDITY 30-70% (NON-CONDENSING) EQUIPPED WITH: PC AND KEYBOARD 2012 · OBJET · EDEN350V	🔒 Subscribe
	YODER MACHINE		YODER MACHINE YODER MACHINE	🔒 Subscribe
			COIL REEL	🔒 Subscribe
	MILLER	24V	MILLER 24V WIRE FEEDER REQUIRES SERVICING MILLER · 24V	🔒 Subscribe
	DOMINO	D320I	DOMINO D320I SCAN HEAD TECH 10MM, BCP7 CONTROLLER, EPT0115276 TOUCH PANEL DOMINO · D320I	🔒 Subscribe
			VERTICAL DRILL PRESS	🔒 Subscribe
1994	BRIDGEPORT	BTC SERIES 2 TAPE MILL	1994 BRIDGEPORT BTC SERIES 2 TAPE MILL TABLE SIZE: 11 X 58 INCHES X-AXIS TRAVEL: 30 INCHES Y-AXIS TRAVEL: 15 INCHES Z-AXIS (KNEE) TRAVEL: 16 INCHES QUILL TRAVEL: 5 INCHES SPINDLE POWER: 4 HP SPINDLE SPEED RANGE: 50 TO 3,500 RPM WEIGHT CAPACITY: UP TO 1,000 LBS S/N: 3122 1994 · BRIDGEPORT · BTC SERIES 2 TAPE MILL	🔒 Subscribe
	CROWN	55F-SSS-A059	CROWN 55F-SSS-A059 FORKLIFT S/N: 9A207384 CROWN · 55F-SSS-A059	🔒 Subscribe
			COIL REEL	🔒 Subscribe
	LOOPCO	COIL REEL	LOOPCO COIL REEL LOOPCO · COIL REEL	🔒 Subscribe
	B&K	UNCOILER	B&K UNCOILER B&K · UNCOILER	🔒 Subscribe
	AUTOBAG	HS-100 EXCEL / PI-4000	AUTOBAG HS-100 EXCEL BAGGING MACHINE PI-4000 PRINTER AUTOMATED PACKAGING SYSTEM AUTOBAG BAGGER MODEL HS-100 EXCEL: SPEEDS UP TO 70 BAGS/MINUTE MAX BAG SIZE: 10.5 WIDE X 22 LONG BAG THICKNESS: 1.5 - 4.0 MIL PASS-THROUGH: 2.5 - 4.5 INCHES MEMORY CAPACITY: UP TO 30 PRE-SETS AIR REQUIREMENTS: 80 PSI AUTOBAG PI-4000 PRINTER: PRINT SPEED: 5 / SECOND PRINT AREA: 3.9 WIDE X 7 LONG RESOLUTION: 203 DPI ELECTRICAL: 110/120 VAC SINGLE PHASE 50/60HZ AUTOBAG · HS-100 EXCEL / PI-4000	🔒 Subscribe
	YODER	MACHINE	YODER MACHINE YODER · MACHINE	🔒 Subscribe
			COIL STRAIGHTENER	🔒 Subscribe
	YODER	COIL STRAIGHTENER	YODER COIL STRAIGHTENER YODER · COIL STRAIGHTENER	🔒 Subscribe
			COIL STRAIGHTENER	🔒 Subscribe
	YODER MANUFACTURING		YODER MANUFACTURING PLATE PINCH ROLL YODER MANUFACTURING	🔒 Subscribe
	VICKERS		VICKERS HYDRAULIC PUMP VICKERS	🔒 Subscribe
	YODER	DECOILER	YODER DECOILER YODER · DECOILER	🔒 Subscribe
	YODER		YODER COIL MACHINE YODER	🔒 Subscribe
2019	P/A INDUSTRIES	SRH10K-36	2019 P/A INDUSTRIES MODEL SRH10K-36 REEL AND DECOILER/UNCOILER S/N: 2019-08-11504 2019 · P/A INDUSTRIES · SRH10K-36	🔒 Subscribe
	AEM	1200 WDC	AEM 1200 WDC 3 HP WET DUST COLLECTOR SN: 6664 MOTOR POWER: 3 HORSEPOWER (HP) AIRFLOW CAPACITY: 1,200 CUBIC FEET PER MINUTE (CFM) WEIGHT: APPROXIMATELY 830 POUNDS AEM · 1200 WDC	🔒 Subscribe
	YODER MANUFACTURING		YODER MANUFACTURING COIL STRAIGHTENER YODER MANUFACTURING	🔒 Subscribe
			JIB CRANES	🔒 Subscribe
			SINGLE ARM COIL TURNSTILE	🔒 Subscribe
			LOT OF SAFETY SWITCHES AND CONTROL COVER BOXES	🔒 Subscribe
	MAX ROLL	COIL TURNSTILE	MAX ROLL COIL TURNSTILE MAX ROLL · COIL TURNSTILE	🔒 Subscribe
2019	P/A INDUSTRIES	SRH10K-36	2019 P/A INDUSTRIES MODEL SRH10K-36 REEL AND DECOILER/UNCOILER S/N: 201201908-11503 2019 · P/A INDUSTRIES · SRH10K-36	🔒 Subscribe
	NATIONAL	24D80	NATIONAL MODEL 24D80 HEAVY DUTY PRECISION HIGH SPEED LATHE - NATIONAL MODEL 24D80 HEAVY DUTY PRECISION HIGH SPEED TURNING CENTER S/N: 810168H NATIONAL · 24D80	🔒 Subscribe
			SHEARING MACHINE	🔒 Subscribe
	WEAN		WEAN UNCOILER WEAN	🔒 Subscribe
	PATERSON		10,000 LB CAPACITY BRIDGE CRANE WITH PATERSON HOISTS PATERSON	🔒 Subscribe
	LOOPCO	COIL TURNSTILE	LOOPCO COIL TURNSTILE LOOPCO · COIL TURNSTILE	🔒 Subscribe
		MANUAL LATHE	MANUAL LATHE MANUAL LATHE	🔒 Subscribe
2022	HOLZHER	1255	2022 HOLZHER 1255 VERTICAL PANEL SAW - STILL IN NEW CRATE! CUTTING DEPTH (MM) 60 CUTTING LENGTH \| CUTTING HEIGHT (MM) 3300 / 4300 / 5300 MM \| 1900 MM 3300 / 4300 / 5300 / 6300 / 7300 MM \| 2200 MM TRIMMING HEIGHT 1,810 / 2,110 SAW BLADE DIA. (MM) 250 AIR REQUIREMENT (M3/H) 1,400 AIR VELOCITY (M/SEC) 20 ATTACHMENT CONNECTION DIA. (MM) 120 CONNECTION DIA., FRAME END (MM) TRK VERSION 100 CONNECTION DIA., CUSTOMER-SIDE EVACUATION (MM) ADDITIONAL 160 STATIC VACUUM (PA) 1,500 WEIGHT (KG) 900 1,200 2022 · HOLZHER · 1255	🔒 Subscribe

Year	Make	Model	Description	Price
2019	HOLLOWAY / PRECISION	316L STAINLESS STEEL REACTOR	2019 HOLLOWAY / PRECISION 316L STAINLESS STEEL REACTOR - DUAL AGITATION, SWEEP/TURBINE -CAPACITY: 225 GALLON -CONSTRUCTION: 316L STAINLESS STEEL -VESSEL RATING: 35 PSI @ 300F -JACKET RATING: 200 PSI @ 300F -DUAL AGITATION: TURBINE -BOTTOM AGITATION: SWEEP -TEMP PROBE -12 MANWAY WITH SIGHT GLASS (3) 3.5 CENTER, 12 FOR AGITATOR -OFF CENTER TURBINE -ALL DRIVE WASH DOWN COVERED WITH STAINLESS STEEL -2 CBO -ELECTRO POLISHED	🔒 Subscribe
2003	OKUMA	TWINSTAR LT200-M	2003 OKUMA TWINSTAR LT200-M: EQUIPPED WITH, CHIP CONVEYOR, IEMCA VIP 80 E BAR FEEDER SPECS: SWING OVER SADDLE: 15.75 INCHES. DISTANCE BETWEEN SPINDLES: 37.8 INCHES. MAXIMUM CUTTING DIAMETER: 8.27 INCHES. XA/XB TRAVEL: 7.56 INCHES. ZA/ZB TRAVEL: 27.56 INCHES. SPINDLE NOSE (MAIN/SUB): A2-6 / A2-6. BORE DIAMETER: 2.44 INCHES. BAR WORK CAPACITY: 2.0 INCHES. RANGE OF SPINDLE SPEED (MAIN & SUB): 4500 RPM. C-AXIS INDEXING (MAIN & SUB): 0.001 DEGREES. Y-AXIS TRAVEL: +1.65 INCHES / -1.97 INCHES. TURRETS: 12-POSITION MAIN TURRET AND 12-POSITION SECONDARY TURRET. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.	🔒 Subscribe
2014	HARDINGE	GX 1600	2014 HARDINGE GX 1600 CNC VMC (KNOWN Z AXIS ELECTRICAL/DRIVE ISSUE) - 2014 HARDINGE GX 1600 CNC VERTICAL MACHINING CENTER (KNOWN Z AXIS ELECTRICAL/DRIVE ISSUE) SPECS: X-AXIS TRAVEL 62.9" Y-AXIS TRAVEL 27.5" Z-AXIS TRAVEL 25" TABLE SIZE 27.5" X 67" TABLE LOAD CAPACITY 3,300 LBS SPINDLE SPEED 6,000 RPM SPINDLE TAPER CAT 50 SPINDLE MOTOR POWER 25 HP TOOL MAGAZINE CAPACITY 30 TOOLS FEED RATES (ALL AXES) 0.1 - 472 IPM RAPID TRAVERSE RATE 1,147 IPM MAX/MIN CLEARANCE FROM TABLETOP TO SPINDLE NOSE 31.1" / 6.1" MACHINE DIMENSIONS (L X W X H) 153.5" X 107.2" X 113.3" MACHINE WEIGHT APPROXIMATELY 21,560 LBS CONTROL SYSTEM FANUC OIMD POWER REQUIREMENT 380-440V, 3-PHASE, 60 HZ	🔒 Subscribe
	TIMESAVER		TIMESAVER	🔒 Subscribe
	AUTO-SERT	AS-7.5	[20] AUTO-SERT AS-7.5 20" HYDRAULIC INSERTION PRESS AS-7.5/20" THROAT TONNAGE CAPACITY: MINIMUM 350 LBS. MAXIMUM 15,000 LBS. THROAT DEPTH TO BACK: 20" (508MM) THROAT DEPTH TO TOP: 20" (508MM) RAM STROKE: 6" (152MM) HYDRAULIC PRESSURE: MINIMUM 40 P.S.I. MAXIMUM 3,000 P.S.I. OIL RESERVOIR CAPACITY: 12 GALLONS (45.42 LIT.) ELECTRICAL SPECS: 208/230/415/460/575 V 3 PHASE 50/60 HZ HEIGHT: 79" (2007MM) WIDTH: 36" (914MM) DEPTH: 45" (1143MM) WEIGHT: 1900 LBS. (862KGS.)	🔒 Subscribe
	LINDE	H40T	LINDE H40T 8000LB FORKLIFT (PROPANE) DRIVES BUT LOSES HYDRAULIC POWER DUE TO LEAKING RAMS REQUIRING EXTENSIVE SERVICING	🔒 Subscribe
1997	HAAS	VF3	1997 HAAS VF3 VERTICAL MACHINING CENTER AXIS TRAVEL: X-AXIS: 40 INCHES Y-AXIS: 20 INCHES Z-AXIS: 25 INCHES TABLE: TABLE SIZE: 48 INCHES X 18 INCHES MAXIMUM TABLE LOAD: APPROXIMATELY 3,500 LBS SPINDLE: SPINDLE MOTOR: 15 HP SPINDLE SPEED: VARIES, OFTEN AROUND 7,500 OR 8,100 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: TOOL CAPACITY: 20 ATC (AUTOMATIC TOOL CHANGER) RAPID TRAVERSE: VALUES VARY, BUT OFTEN AROUND 710 IPM, OR IN SOME CASES 1000 IPM. WEIGHT: APPROXIMATELY 11,720 TO 12,500 LBS.	🔒 Subscribe
1996	BEP	FP-80500	1996 BEP FP-80500 CENTRIFUGE PREVIOUSLY USED FOR CHERRIES IN A CANDY MAKING OPERATION 1200 MAX RPM PERFORATED BASKET 460V	🔒 Subscribe
2023	BIG ASS	BASIC 6 HVLS	2023 BIG ASS BASIC 6 HVLS 24' INDUSTRIAL FAN ENVIRONMENT INDOOR (DRY) DIAMETER 24 FT DOWNROD LENGTH / CEILING HEIGHT 2 FT. EXTENSION TUBE 400-480V/3 PHASE 2 HP >725W AFRS	🔒 Subscribe
			COIL TIPPER	🔒 Subscribe
	SECO	UNCOILER	SECO UNCOILER	🔒 Subscribe
2006	MAKINO	S56	2006 MAKINO S56 VERTICAL MACHINING CENTER EQUIPPED WITH: THRU SPINDLE COOLANT BLUM LASER TOOL LENGTH, DIAMETER SET X AXIS TRAVEL 35.4" Y AXIS TRAVEL 19.7" Z AXIS TRAVEL 19.7" CUTTING FEED RATE 1574 IPM RAPID TRAVERSE 1574 IPM TABLE DIMENSIONS 19.7" X 39.4" SPINDLE MOTOR 30 HP SPINDLE SPEED 20,000 RPM ATC CAPACITY 20 SPINDLE TAPER HSK63 # AXIS 3 THERE IS AN ERROR ON THE XY BOARD THAT NEEDS TO BE SWITCHED OUT. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.	🔒 Subscribe
	CHICAGO		90 TON CHICAGO PRESS BRAKE	🔒 Subscribe
			COIL TIPPER	🔒 Subscribe
			TIPPER	🔒 Subscribe
2012	OBJET	EDEN350V	2012 OBJET EDEN350V 3D PRINTER BUILD SIZE: 13.4" X 13.4" X 7.9" LAYER THICKNESS: HORIZONTAL BUILD LAYERS DOWN TO 16-MICRONS 0.0006" WORKSTATION COMPATIBILITY: WINDOWS 7 32/64-BIT NETWORK CONNECTIVITY: LAN TCP/IP SIZE AND WEIGHT: 52.0" X 39.0" X 47.25" OBJET EDEN350V: 902 LBS POWER REQUIREMENTS: 110240 VAC 50/60 HZ; 1.5 KW SINGLE PHASE REGULATORY COMPLIANCE: CE, FCC SPECIAL FACILITY REQUIREMENTS: TEMPERATURE 18-25 C (64-77 F); RELATIVE HUMIDITY 30-70% (NON-CONDENSING) EQUIPPED WITH: PC AND KEYBOARD	🔒 Subscribe
	YODER MACHINE		YODER MACHINE	🔒 Subscribe
			COIL REEL	🔒 Subscribe
	MILLER	24V	MILLER 24V WIRE FEEDER REQUIRES SERVICING	🔒 Subscribe
	DOMINO	D320I	DOMINO D320I SCAN HEAD TECH 10MM, BCP7 CONTROLLER, EPT0115276 TOUCH PANEL	🔒 Subscribe
			VERTICAL DRILL PRESS	🔒 Subscribe
1994	BRIDGEPORT	BTC SERIES 2 TAPE MILL	1994 BRIDGEPORT BTC SERIES 2 TAPE MILL TABLE SIZE: 11 X 58 INCHES X-AXIS TRAVEL: 30 INCHES Y-AXIS TRAVEL: 15 INCHES Z-AXIS (KNEE) TRAVEL: 16 INCHES QUILL TRAVEL: 5 INCHES SPINDLE POWER: 4 HP SPINDLE SPEED RANGE: 50 TO 3,500 RPM WEIGHT CAPACITY: UP TO 1,000 LBS S/N: 3122	🔒 Subscribe
	CROWN	55F-SSS-A059	CROWN 55F-SSS-A059 FORKLIFT S/N: 9A207384	🔒 Subscribe
			COIL REEL	🔒 Subscribe
	LOOPCO	COIL REEL	LOOPCO COIL REEL	🔒 Subscribe
	B&K	UNCOILER	B&K UNCOILER	🔒 Subscribe
	AUTOBAG	HS-100 EXCEL / PI-4000	AUTOBAG HS-100 EXCEL BAGGING MACHINE PI-4000 PRINTER AUTOMATED PACKAGING SYSTEM AUTOBAG BAGGER MODEL HS-100 EXCEL: SPEEDS UP TO 70 BAGS/MINUTE MAX BAG SIZE: 10.5 WIDE X 22 LONG BAG THICKNESS: 1.5 - 4.0 MIL PASS-THROUGH: 2.5 - 4.5 INCHES MEMORY CAPACITY: UP TO 30 PRE-SETS AIR REQUIREMENTS: 80 PSI AUTOBAG PI-4000 PRINTER: PRINT SPEED: 5 / SECOND PRINT AREA: 3.9 WIDE X 7 LONG RESOLUTION: 203 DPI ELECTRICAL: 110/120 VAC SINGLE PHASE 50/60HZ	🔒 Subscribe
	YODER	MACHINE	YODER MACHINE	🔒 Subscribe
			COIL STRAIGHTENER	🔒 Subscribe
	YODER	COIL STRAIGHTENER	YODER COIL STRAIGHTENER	🔒 Subscribe
			COIL STRAIGHTENER	🔒 Subscribe
	YODER MANUFACTURING		YODER MANUFACTURING PLATE PINCH ROLL	🔒 Subscribe
	VICKERS		VICKERS HYDRAULIC PUMP	🔒 Subscribe
	YODER	DECOILER	YODER DECOILER	🔒 Subscribe
	YODER		YODER COIL MACHINE	🔒 Subscribe
2019	P/A INDUSTRIES	SRH10K-36	2019 P/A INDUSTRIES MODEL SRH10K-36 REEL AND DECOILER/UNCOILER S/N: 2019-08-11504	🔒 Subscribe
	AEM	1200 WDC	AEM 1200 WDC 3 HP WET DUST COLLECTOR SN: 6664 MOTOR POWER: 3 HORSEPOWER (HP) AIRFLOW CAPACITY: 1,200 CUBIC FEET PER MINUTE (CFM) WEIGHT: APPROXIMATELY 830 POUNDS	🔒 Subscribe
	YODER MANUFACTURING		YODER MANUFACTURING COIL STRAIGHTENER	🔒 Subscribe
			JIB CRANES	🔒 Subscribe
			SINGLE ARM COIL TURNSTILE	🔒 Subscribe
			LOT OF SAFETY SWITCHES AND CONTROL COVER BOXES	🔒 Subscribe
	MAX ROLL	COIL TURNSTILE	MAX ROLL COIL TURNSTILE	🔒 Subscribe
2019	P/A INDUSTRIES	SRH10K-36	2019 P/A INDUSTRIES MODEL SRH10K-36 REEL AND DECOILER/UNCOILER S/N: 201201908-11503	🔒 Subscribe
	NATIONAL	24D80	NATIONAL MODEL 24D80 HEAVY DUTY PRECISION HIGH SPEED LATHE - NATIONAL MODEL 24D80 HEAVY DUTY PRECISION HIGH SPEED TURNING CENTER S/N: 810168H	🔒 Subscribe
			SHEARING MACHINE	🔒 Subscribe
	WEAN		WEAN UNCOILER	🔒 Subscribe
	PATERSON		10,000 LB CAPACITY BRIDGE CRANE WITH PATERSON HOISTS	🔒 Subscribe
	LOOPCO	COIL TURNSTILE	LOOPCO COIL TURNSTILE	🔒 Subscribe
		MANUAL LATHE	MANUAL LATHE	🔒 Subscribe
2022	HOLZHER	1255	2022 HOLZHER 1255 VERTICAL PANEL SAW - STILL IN NEW CRATE! CUTTING DEPTH (MM) 60 CUTTING LENGTH \| CUTTING HEIGHT (MM) 3300 / 4300 / 5300 MM \| 1900 MM 3300 / 4300 / 5300 / 6300 / 7300 MM \| 2200 MM TRIMMING HEIGHT 1,810 / 2,110 SAW BLADE DIA. (MM) 250 AIR REQUIREMENT (M3/H) 1,400 AIR VELOCITY (M/SEC) 20 ATTACHMENT CONNECTION DIA. (MM) 120 CONNECTION DIA., FRAME END (MM) TRK VERSION 100 CONNECTION DIA., CUSTOMER-SIDE EVACUATION (MM) ADDITIONAL 160 STATIC VACUUM (PA) 1,500 WEIGHT (KG) 900 1,200	🔒 Subscribe

2019 HOLLOWAY / PRECISION 316L STAINLESS STEEL REACTOR

CHEMICAL PROCESSING EQUIPMENT

2019 HOLLOWAY / PRECISION 316L STAINLESS STEEL REACTOR - DUAL AGITATION, SWEEP/TURBINE -CAPACITY: 22...

Hammer Price: 🔒

2003 OKUMA TWINSTAR LT200-M

METALWORKING & FABRICATION EQUIPMENT

2003 OKUMA TWINSTAR LT200-M: EQUIPPED WITH, CHIP CONVEYOR, IEMCA VIP 80 E BAR FEEDER SPECS: SWING OV...

Hammer Price: 🔒

2014 HARDINGE GX 1600

CNC MACHINE CENTERS

2014 HARDINGE GX 1600 CNC VMC (KNOWN Z AXIS ELECTRICAL/DRIVE ISSUE) - 2014 HARDINGE GX 1600 CNC VERT...

Hammer Price: 🔒

TIMESAVER

METALWORKING & FABRICATION EQUIPMENT

TIMESAVER...

Hammer Price: 🔒

AUTO-SERT AS-7.5

PRESSES & FORMING

[20] AUTO-SERT AS-7.5 20" HYDRAULIC INSERTION PRESS AS-7.5/20" THROAT TONNAGE CAPACITY: MINIMUM 350 ...

Hammer Price: 🔒

LINDE H40T

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

LINDE H40T 8000LB FORKLIFT (PROPANE) DRIVES BUT LOSES HYDRAULIC POWER DUE TO LEAKING RAMS REQUIRING ...

Hammer Price: 🔒

1997 HAAS VF3

CNC MACHINE CENTERS

1997 HAAS VF3 VERTICAL MACHINING CENTER AXIS TRAVEL: X-AXIS: 40 INCHES Y-AXIS: 20 INCHES Z-AXIS: 25 ...

Hammer Price: 🔒

1996 BEP FP-80500

FOOD PROCESSING AND RESTAURANT EQUIPMENT

1996 BEP FP-80500 CENTRIFUGE PREVIOUSLY USED FOR CHERRIES IN A CANDY MAKING OPERATION 1200 MAX RPM P...

Hammer Price: 🔒

2023 BIG ASS BASIC 6 HVLS

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2023 BIG ASS BASIC 6 HVLS 24' INDUSTRIAL FAN ENVIRONMENT INDOOR (DRY) DIAMETER 24 FT DOWNROD LENGTH ...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

COIL TIPPER...

Hammer Price: 🔒

SECO UNCOILER

METALWORKING & FABRICATION EQUIPMENT

SECO UNCOILER...

Hammer Price: 🔒

2006 MAKINO S56

CNC MACHINE CENTERS

2006 MAKINO S56 VERTICAL MACHINING CENTER EQUIPPED WITH: THRU SPINDLE COOLANT BLUM LASER TOOL LENGTH...

Hammer Price: 🔒

CHICAGO

PRESSES & FORMING

90 TON CHICAGO PRESS BRAKE...

Hammer Price: 🔒

PRESSES & FORMING

COIL TIPPER...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TIPPER...

Hammer Price: 🔒

2012 OBJET EDEN350V

COMMERCIAL PRINTING & BINDERY EQUIPMENT

2012 OBJET EDEN350V 3D PRINTER BUILD SIZE: 13.4" X 13.4" X 7.9" LAYER THICKNESS: HORIZONTAL BUILD LA...

Hammer Price: 🔒

YODER MACHINE

MISC

YODER MACHINE...

Hammer Price: 🔒

MISC

COIL REEL...

Hammer Price: 🔒

MILLER 24V

WELDING & CUTTING

MILLER 24V WIRE FEEDER REQUIRES SERVICING...

Hammer Price: 🔒

DOMINO D320I

COMMERCIAL PRINTING & BINDERY EQUIPMENT

DOMINO D320I SCAN HEAD TECH 10MM, BCP7 CONTROLLER, EPT0115276 TOUCH PANEL...

Hammer Price: 🔒

PRESSES & FORMING

VERTICAL DRILL PRESS...

Hammer Price: 🔒

1994 BRIDGEPORT BTC SERIES 2 TAPE MILL

CNC MACHINE CENTERS

1994 BRIDGEPORT BTC SERIES 2 TAPE MILL TABLE SIZE: 11 X 58 INCHES X-AXIS TRAVEL: 30 INCHES Y-AXIS TR...

Hammer Price: 🔒

CROWN 55F-SSS-A059

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CROWN 55F-SSS-A059 FORKLIFT S/N: 9A207384...

Hammer Price: 🔒

MISC

COIL REEL...

Hammer Price: 🔒

LOOPCO COIL REEL

MISC

LOOPCO COIL REEL...

Hammer Price: 🔒

B&K UNCOILER

METALWORKING & FABRICATION EQUIPMENT

B&K UNCOILER...

Hammer Price: 🔒

AUTOBAG HS-100 EXCEL / PI-4000

PACKAGING EQUIPMENT

AUTOBAG HS-100 EXCEL BAGGING MACHINE PI-4000 PRINTER AUTOMATED PACKAGING SYSTEM AUTOBAG BAGGER MODEL...

Hammer Price: 🔒

YODER MACHINE

METALWORKING & FABRICATION EQUIPMENT

YODER MACHINE...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

COIL STRAIGHTENER...

Hammer Price: 🔒

YODER COIL STRAIGHTENER

METALWORKING & FABRICATION EQUIPMENT

YODER COIL STRAIGHTENER...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

COIL STRAIGHTENER...

Hammer Price: 🔒

YODER MANUFACTURING

METALWORKING & FABRICATION EQUIPMENT

YODER MANUFACTURING PLATE PINCH ROLL...

Hammer Price: 🔒

VICKERS

TANKS, PUMPS & STORAGE EQUIPMENT

VICKERS HYDRAULIC PUMP...

Hammer Price: 🔒

YODER DECOILER

PRESSES & FORMING

YODER DECOILER...

Hammer Price: 🔒

YODER

PRESSES & FORMING

YODER COIL MACHINE...

Hammer Price: 🔒

2019 P/A INDUSTRIES SRH10K-36

PRESSES & FORMING

2019 P/A INDUSTRIES MODEL SRH10K-36 REEL AND DECOILER/UNCOILER S/N: 2019-08-11504...

Hammer Price: 🔒

AEM 1200 WDC

DUST COLLECTION EQUIPMENT

AEM 1200 WDC 3 HP WET DUST COLLECTOR SN: 6664 MOTOR POWER: 3 HORSEPOWER (HP) AIRFLOW CAPACITY: 1,200...

Hammer Price: 🔒

YODER MANUFACTURING

METALWORKING & FABRICATION EQUIPMENT

YODER MANUFACTURING COIL STRAIGHTENER...

Hammer Price: 🔒

CONSTRUCTION EQUIPMENT

JIB CRANES...

Hammer Price: 🔒

MISC

SINGLE ARM COIL TURNSTILE...

Hammer Price: 🔒

MISC

LOT OF SAFETY SWITCHES AND CONTROL COVER BOXES...

Hammer Price: 🔒

MAX ROLL COIL TURNSTILE

MISC

MAX ROLL COIL TURNSTILE...

Hammer Price: 🔒

2019 P/A INDUSTRIES SRH10K-36

PRESSES & FORMING

2019 P/A INDUSTRIES MODEL SRH10K-36 REEL AND DECOILER/UNCOILER S/N: 201201908-11503...

Hammer Price: 🔒

NATIONAL 24D80

METALWORKING & FABRICATION EQUIPMENT

NATIONAL MODEL 24D80 HEAVY DUTY PRECISION HIGH SPEED LATHE - NATIONAL MODEL 24D80 HEAVY DUTY PRECISI...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

SHEARING MACHINE...

Hammer Price: 🔒

WEAN

METALWORKING & FABRICATION EQUIPMENT

WEAN UNCOILER...

Hammer Price: 🔒

PATERSON

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

10,000 LB CAPACITY BRIDGE CRANE WITH PATERSON HOISTS...

Hammer Price: 🔒

LOOPCO COIL TURNSTILE

MISC

LOOPCO COIL TURNSTILE...

Hammer Price: 🔒

MANUAL LATHE

METALWORKING & FABRICATION EQUIPMENT

MANUAL LATHE...

Hammer Price: 🔒

2022 HOLZHER 1255

WOODWORKING EQUIPMENT

2022 HOLZHER 1255 VERTICAL PANEL SAW - STILL IN NEW CRATE! CUTTING DEPTH (MM) 60 CUTTING LENGTH | CU...

Hammer Price: 🔒

1 2 3 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Surplus Process Industrial Machinery Auction

Save to Project Folder

Print Options

Save to Project Folder