Tool Die Online Auction Repair Supply Company
Category: MISC
Total Lots:
150
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
ASSORTED BORING BARS, 3/4 SHANK.
|
🔒 Subscribe | |||
|
|
BROWN AND SHARPE | 586 |
BROWN AND SHARPE 586 HEIGHT GAUGE, 26 INCH, WITH WOODEN BOX.
|
🔒 Subscribe | |
|
|
MITUTOYO | 141-133 |
MITUTOYO 141-133 INSIDE MICROMETER, IMS - 12 INCH, COMPLETE SET, APPEARS TO HAVE LIMITED USAGE.
|
🔒 Subscribe | |
|
|
STARRETT | 98 |
STARRETT 98 MASTER LEVEL, 8 INCH, GOOD CONDITION.
|
🔒 Subscribe | |
|
|
ASSORTED BORING BARS, 1/2 SHANK, CARBIDE TIPPED.
|
🔒 Subscribe | |||
|
|
FLYNN | 30A |
FLYNN 30A BORING BEAD R8 COLLET.
|
🔒 Subscribe | |
|
|
ASSORTED CARBIDE SAWS, WITH SAW HOLDER, R8 SHANK.
|
🔒 Subscribe | |||
|
|
5 C COLLETS, SIZES RANGE FROM 1/16 UPTO 1 1/16, INCREMENTS BY 1/64 OF AN INCH, MOST ALL ARE NEW
|
🔒 Subscribe | |||
|
|
ASSORTED MILL CUTTERS, TAPER AND RADIUS, VARIOUS SIZES.
|
🔒 Subscribe | |||
|
|
SINE PLATE, ADJUSTABLE ANGLE, 6 IN.2, DRILLED AND TAPPED HOLES. LIMITED USAGE.
|
🔒 Subscribe | |||
|
|
COMBINATION SQUARE, 12.
|
🔒 Subscribe | |||
|
|
ASSORTED HIGH SPEED TOOL CUTTERS.
|
🔒 Subscribe | |||
|
|
KOOL MIST |
KOOL MIST COOLANT SPRAY WITH 3 1/2 GALLONS OF FLUID.
|
🔒 Subscribe | ||
|
|
BROWN & SHARPE | 585 |
BROWN & SHARPE 585 19 INCH HEIGHT GAUGE WITH WOODEN BOX.
|
🔒 Subscribe | |
|
|
ASSORTED MILL CUTTERS. VARIOUS SIZES AND TYPES, ALL ARE HIGH SPEED.
|
🔒 Subscribe | |||
|
|
MITUTOYO | HDS - 12 INCH |
MITUTOYO HDS - 12 INCH ELECTRONIC HEIGHT GAUGE 12 INCH CAPACITY, ENGLISH OR METRIC. S/N: 000-0060
|
🔒 Subscribe | |
|
|
SINE PLATE, 6 IN.2, DRILLED AND TAPPED HOLES.
|
🔒 Subscribe | |||
|
|
KENNEDY |
KENNEDY TOOL MAKER CABINET, TOP AND BOTTOM CABINETS, OVERALL APPEARS TO BE IN GOOD CONDITION.
|
🔒 Subscribe | ||
|
|
ASSORTED MILL CUTTERS, ALL ARE HIGH SPEED, VARIOUS SIZES AND TYPES.
|
🔒 Subscribe | |||
|
|
KENNAMETAL |
KENNAMETAL INSERT HOLDERS WITH ASSORTED INSERTS.
|
🔒 Subscribe | ||
|
|
ENCO |
ENCO BROACH BAR SET, ENGLISH, WOODEN CASE.
|
🔒 Subscribe | ||
|
|
ALBRECHT |
ALBRECHT DRILL CHUCK, 1/32 UP TO 1/2 INCH, R8 COLLET.
|
🔒 Subscribe | ||
|
|
GAUGE BLOCK SET, 81 PIECE, .050 UP TO 4 INCH, LIMITED USAGE.
|
🔒 Subscribe | |||
|
|
ASSORTED GRINDING WHEELS, VARIOUS SIZES AND TYPES.
|
🔒 Subscribe | |||
|
|
ASSORTED MILL CUTTERS, ALL OUR CARBIDE, VARIOUS SIZES AND TYPES.
|
🔒 Subscribe | |||
|
|
CYCLONE BLAST CABINET, MAXIMUM INSIDE DIMENSION IS 37 X 21 X 24, DOOR OPENING IS 18 1/2 X 16 INCLUDES JUST RECOVERY DUST UNIT, THE GLOVES ARE IN GOOD CONDITION, OVERALL HAS GOOD APPEARANCE.
|
🔒 Subscribe | |||
|
|
1986 | MSC | 95124 |
1986 MSC 95124 DRILL PRESS NINE SPEED, STEP PULLEY HEAD, MANUAL DOWN FEED, 16 1/2 X 18 1/2 TABLE, 10 INCH THROAT, JACOBS CHUCK 1/2, 120 V. S/N: 8U111
|
🔒 Subscribe |
|
|
CRAFTSMAN |
CRAFTSMAN TOOLBOX AND CHEST CONSISTING OF FOUR DRAWER TOOL CHEST ON 4 CASTERS, INCLUDES ONE TOOLBOX WITH THREE DRAWERS, ONE TOOLBOX WITH SEVEN DRAWERS, ALL IN VERY CONDITION, ALL BOLTED TOGETHER.
|
🔒 Subscribe | ||
|
|
VERMONT GAUGE COMPANY |
VERMONT GAUGE COMPANY PIN GAUGE SET, THREE DRAWERS, .0110-.6250, ALL ARE PLUS SIZE, INCLUDES THE FOUR DRAWER CABINET. SURFACE RUST IS APPARENT ON CERTAIN PINS.
|
🔒 Subscribe | ||
|
|
TROYKE MFG CO | R-12 |
TROYKE MFG CO R-12 ROTARY TABLE, 12 INCH, SINGLE AXIS, IN GOOD CONDITION.
|
🔒 Subscribe | |
|
|
CRITERION | DBL - 202B |
CRITERION DBL - 202B BORING HEAD WITH R8 SHANK.
|
🔒 Subscribe | |
|
|
INSERT FLY CUTTER, INSERT TYPE, 3 INCH, WITH R8 SPINDLE ADAPTER, INCLUDES INSERTS.
|
🔒 Subscribe | |||
|
|
AMES | 2 |
AMES 2 HARDNESS TESTER WITH TEST BLOCKS, IN WOODEN CASE.
|
🔒 Subscribe | |
|
|
THREE BAR POWER ROLL, OPEN END 36 INCH WITH 2 INCH DIAMETER ROLLERS, ROD AND GROOVE, ADDED BALDOR MOTOR 1/4 HP, GEARBOX DRIVE, FOOT CONTROL, MONITOR ON SHOP MADE BASE, VARIABLE SPEED.
|
🔒 Subscribe | |||
|
|
HANSVEDT | SM 150B |
HANSVEDT SM 150B EDM SINKER MACHINE INCLUDES POWER SUPPLY, MODEL 150B, 8 X 12 TABLE, INCLUDES THE 3R TOOLING, ACURITE MASTER -MP THREE AXIS DIGITAL READOUT PROGRAMMABLE TYPE, 15 X 23 TANK SIZE, X AXIS 10, Y AXIS 6, Z AXIS 5, 150 WATT POWER SUPPLY, INCLUDES THE ORIGINAL TABLE WITH HYDRAULIC PUMP AND COOLANT.
|
🔒 Subscribe | |
|
|
WILSON | 3R |
WILSON 3R HARDNESS TESTER, TEST NUMBER 131, INCLUDES DIAMONDS, TEST BLOCKS AND ANVILS AND TABLE.
|
🔒 Subscribe | |
|
|
ALLIANT |
ALLIANT HORIZONTAL MILLING ATTACHMENT ASSEMBLY, CONSISTING OF A RIGHT ANGLE ATTACHMENT, OUTBOARD SUPPORT, AND MILLING ARBOR, ALL PIECES ARE NEW. THESE PIECES ARE DESIGNED TO FIT ON AN ALLIANT MILL.
|
🔒 Subscribe | ||
|
|
AMES | 2S |
AMES 2S PRECISION PORTABLE HARDNESS TESTER WITH GAUGE BLOCKS, IN WOODEN CASE. S/N: 12025
|
🔒 Subscribe | |
|
|
CLAUSING COLCHESTER |
ROYAL PRODUCTS COLLET CLOSURE, NO COLLECTS, WILL FIT A CLAUSING COLECHESTER LATHE.
|
🔒 Subscribe | ||
|
|
BALDOR | 500 |
BALDOR 500 CARBIDE GRINDER 1/2 HORSEPOWER, 115 V, SINGLE PHASE, EXCELLENT APPEARANCE LIMITED USAGE S/N: F984
|
🔒 Subscribe | |
|
|
CARBIDE MILL CUTTERS, ASSORTED SIZES AND TYPES.
|
🔒 Subscribe | |||
|
|
KURT | D60 |
KURT D60 MACHINIST VISE, 6 INCH, WITH HANDLE, NO SWIVEL BASE S/N: 034754
|
🔒 Subscribe | |
|
|
ALORIS |
ALORIS QUICK CHANGE TOOL POST TOOL CHANGER, INCLUDES EIGHT ADAPTERS, CXA1, CXA2, CXA7, CXA8, CXA10, CXA41 WITH BORING BAR.
|
🔒 Subscribe | ||
|
|
DAKE | 75H |
DAKE 75H H FRAME PRESS, 44 INCHES BETWEEN THE UPRIGHTS, ADJUSTABLE BED, MANUAL HYDRAULICS, 3 ADJUSTABLE BED, DOES HAVE AN REPLACEABLE HANDLE FOR FINE ADJUSTMENT, ORIGINAL CONDITION. S/N: 154527
|
🔒 Subscribe | |
|
|
HILMAN | 5 ERS |
HILMAN 5 ERS MACHINERY SKATES, ONE SET OF (4), SHORT AND LONG HANDLES, IN ORIGINAL METAL BOX, DELUXE KIT, 5 TON CAPACITY, INCLUDES THE SWIVEL BASE PLATES, MODEL T- 5- LO, SERIAL NUMBER 98070494, COMPLETE SET.
|
🔒 Subscribe | |
|
|
SUBURBAN | MG - 5CV S1 |
SUBURBAN MG - 5CV S1 RADIUS DRESSER S/N: 5139-9905, THIS WAS PURCHASED NEW WITH LIMITED USAGE ITS IN NEAR NEW CONDITION WITH NEAR NEW APPEARANCE.
|
🔒 Subscribe | |
|
|
THERMCRAFT | 12 - 20 - 12BX |
THERMCRAFT HEAT TREAT OVEN, MODEL 12 - 20 - 12BX, 230 V, 1PH, 22 A, 5000 W, MAXIMUM TEMPERATURE 20 TO 150, THE INSIDE CAVITY MEASURES 12 X 20 X 12, THE REFRACTORY IS IN VERY GOOD CONDITION HAS A SPECIAL ATMOSPHERE S/N: 91303
|
🔒 Subscribe | |
|
|
GWM | DP 215238099S |
GWM DP 215238099S ROTARY PHASE CONVERTER, FRAME 215, INPUT/OUTPUT 230 VAC, INPUT 1 PHASE 98 FULL LOAD AMPS @ MAXIMUM 3 PHASE LOAD 17/17 HP/KVA, MINIMUM SERVICE, 1 PHASE 60 AMPS, LARGEST SINGLE MOTOR 8.5 HP. MOTOR 10HP, 208-230/460 V/ MODEL WB0104DXA.
|
🔒 Subscribe | |
|
|
ALLIANT | LH30-TWO |
ALLIANT LH30-TWO VERTICAL MILLING MACHINE 9 X 42 T SLIDE TABLE, THE TABLE HAS THE ORIGINAL FEATHERING, THE TABLE DOES NOT HAVE ANY SIGNS OF WEAR, TABLE IS IN VERY GOOD CONDITION, 3 HP 220/440 V THREE PHASE, 60 TO 4500 RPM, SONY MILLMAN PROGRAMMABLE 2 AXIS DIGITAL READOUT, SERIAL NUMBER H3U000244, SERVO MODEL 150 POWER CROSSFEED, SERVO MODEL 150 POWER SADDLE, MANUAL KNEE, ONE SHOT LUBE, ACCORDION STYLE WAY COVERS, FEATHERING ON THE WAYS, INCLUDES A HOLD DOWN SET AND R8 COLLECTS. S/N: 20318298
|
🔒 Subscribe | |
|
|
CLAUSING COLCHESTER | 15 INCH |
CLAUSING COLCHESTER 15 INCH GEARED HEAD LATHE, 15 INCH SWING, 50 INCH CENTERS, POWER LONGITUDINAL FEED, POWER CROSSFIELD, THREAD DIAL, THREE JAW CHUCK, ENGLISH AND METRIC THREAD, QUICK CHANGE GEARS, 2 3/16 SPINDLE HOLE, DOES NOT HAVE A TRACER ATTACHMENT, CHIP GUARD, FAGER 2 AXIS PROGRAMMABLE DIGITAL READOUT, S/N: 6/0055/33568DD
|
🔒 Subscribe |
ASSORTED BORING BARS, 3/4 SHANK.
BROWN AND SHARPE 586
BROWN AND SHARPE 586 HEIGHT GAUGE, 26 INCH, WITH WOODEN BOX....
MITUTOYO 141-133
MITUTOYO 141-133 INSIDE MICROMETER, IMS - 12 INCH, COMPLETE SET, APPEARS TO HAVE LIMITED USAGE....
STARRETT 98
STARRETT 98 MASTER LEVEL, 8 INCH, GOOD CONDITION....
ASSORTED BORING BARS, 1/2 SHANK, CARBIDE TIPPED.
FLYNN 30A
FLYNN 30A BORING BEAD R8 COLLET....
ASSORTED CARBIDE SAWS, WITH SAW HOLDER, R8 SHANK.
5 C COLLETS, SIZES RANGE FROM 1/16 UPTO 1 1/16, INCREMENTS BY 1/64 OF AN INCH, MOST ALL ARE NEW
ASSORTED MILL CUTTERS, TAPER AND RADIUS, VARIOUS SIZES.
SINE PLATE, ADJUSTABLE ANGLE, 6 IN.2, DRILLED AND TAPPED HOLES. LIMITED USAGE.
COMBINATION SQUARE, 12.
ASSORTED HIGH SPEED TOOL CUTTERS.
KOOL MIST
KOOL MIST COOLANT SPRAY WITH 3 1/2 GALLONS OF FLUID....
BROWN & SHARPE 585
BROWN & SHARPE 585 19 INCH HEIGHT GAUGE WITH WOODEN BOX....
ASSORTED MILL CUTTERS. VARIOUS SIZES AND TYPES, ALL ARE HIGH SPEED.
MITUTOYO HDS - 12 INCH
MITUTOYO HDS - 12 INCH ELECTRONIC HEIGHT GAUGE 12 INCH CAPACITY, ENGLISH OR METRIC. S/N: 000-0060...
SINE PLATE, 6 IN.2, DRILLED AND TAPPED HOLES.
KENNEDY
KENNEDY TOOL MAKER CABINET, TOP AND BOTTOM CABINETS, OVERALL APPEARS TO BE IN GOOD CONDITION....
ASSORTED MILL CUTTERS, ALL ARE HIGH SPEED, VARIOUS SIZES AND TYPES.
KENNAMETAL
KENNAMETAL INSERT HOLDERS WITH ASSORTED INSERTS....
ENCO
ENCO BROACH BAR SET, ENGLISH, WOODEN CASE....
ALBRECHT
ALBRECHT DRILL CHUCK, 1/32 UP TO 1/2 INCH, R8 COLLET....
GAUGE BLOCK SET, 81 PIECE, .050 UP TO 4 INCH, LIMITED USAGE.
ASSORTED GRINDING WHEELS, VARIOUS SIZES AND TYPES.
ASSORTED MILL CUTTERS, ALL OUR CARBIDE, VARIOUS SIZES AND TYPES.
CYCLONE BLAST CABINET, MAXIMUM INSIDE DIMENSION IS 37 X 21 X 24, DOOR OPENING IS 18 1/2 X 16 INCLUDE
1986 MSC 95124
1986 MSC 95124 DRILL PRESS NINE SPEED, STEP PULLEY HEAD, MANUAL DOWN FEED, 16 1/2 X 18 1/2 TABLE, 10...
CRAFTSMAN
CRAFTSMAN TOOLBOX AND CHEST CONSISTING OF FOUR DRAWER TOOL CHEST ON 4 CASTERS, INCLUDES ONE TOOLBOX ...
VERMONT GAUGE COMPANY
VERMONT GAUGE COMPANY PIN GAUGE SET, THREE DRAWERS, .0110-.6250, ALL ARE PLUS SIZE, INCLUDES THE FOU...
TROYKE MFG CO R-12
TROYKE MFG CO R-12 ROTARY TABLE, 12 INCH, SINGLE AXIS, IN GOOD CONDITION....
CRITERION DBL - 202B
CRITERION DBL - 202B BORING HEAD WITH R8 SHANK....
INSERT FLY CUTTER, INSERT TYPE, 3 INCH, WITH R8 SPINDLE ADAPTER, INCLUDES INSERTS.
AMES 2
AMES 2 HARDNESS TESTER WITH TEST BLOCKS, IN WOODEN CASE....
THREE BAR POWER ROLL, OPEN END 36 INCH WITH 2 INCH DIAMETER ROLLERS, ROD AND GROOVE, ADDED BALDOR MO
HANSVEDT SM 150B
HANSVEDT SM 150B EDM SINKER MACHINE INCLUDES POWER SUPPLY, MODEL 150B, 8 X 12 TABLE, INCLUDES THE 3R...
WILSON 3R
WILSON 3R HARDNESS TESTER, TEST NUMBER 131, INCLUDES DIAMONDS, TEST BLOCKS AND ANVILS AND TABLE....
ALLIANT
ALLIANT HORIZONTAL MILLING ATTACHMENT ASSEMBLY, CONSISTING OF A RIGHT ANGLE ATTACHMENT, OUTBOARD SUP...
AMES 2S
AMES 2S PRECISION PORTABLE HARDNESS TESTER WITH GAUGE BLOCKS, IN WOODEN CASE. S/N: 12025...
CLAUSING COLCHESTER
ROYAL PRODUCTS COLLET CLOSURE, NO COLLECTS, WILL FIT A CLAUSING COLECHESTER LATHE....
BALDOR 500
BALDOR 500 CARBIDE GRINDER 1/2 HORSEPOWER, 115 V, SINGLE PHASE, EXCELLENT APPEARANCE LIMITED USAGE S...
CARBIDE MILL CUTTERS, ASSORTED SIZES AND TYPES.
KURT D60
KURT D60 MACHINIST VISE, 6 INCH, WITH HANDLE, NO SWIVEL BASE S/N: 034754...
ALORIS
ALORIS QUICK CHANGE TOOL POST TOOL CHANGER, INCLUDES EIGHT ADAPTERS, CXA1, CXA2, CXA7, CXA8, CXA10, ...
DAKE 75H
DAKE 75H H FRAME PRESS, 44 INCHES BETWEEN THE UPRIGHTS, ADJUSTABLE BED, MANUAL HYDRAULICS, 3 ADJUSTA...
HILMAN 5 ERS
HILMAN 5 ERS MACHINERY SKATES, ONE SET OF (4), SHORT AND LONG HANDLES, IN ORIGINAL METAL BOX, DELUXE...
SUBURBAN MG - 5CV S1
SUBURBAN MG - 5CV S1 RADIUS DRESSER S/N: 5139-9905, THIS WAS PURCHASED NEW WITH LIMITED USAGE ITS IN...
THERMCRAFT 12 - 20 - 12BX
THERMCRAFT HEAT TREAT OVEN, MODEL 12 - 20 - 12BX, 230 V, 1PH, 22 A, 5000 W, MAXIMUM TEMPERATURE 20 T...
GWM DP 215238099S
GWM DP 215238099S ROTARY PHASE CONVERTER, FRAME 215, INPUT/OUTPUT 230 VAC, INPUT 1 PHASE 98 FULL LOA...
ALLIANT LH30-TWO
ALLIANT LH30-TWO VERTICAL MILLING MACHINE 9 X 42 T SLIDE TABLE, THE TABLE HAS THE ORIGINAL FEATHERIN...
CLAUSING COLCHESTER 15 INCH
CLAUSING COLCHESTER 15 INCH GEARED HEAD LATHE, 15 INCH SWING, 50 INCH CENTERS, POWER LONGITUDINAL FE...