L N Industries Inc Complete Steel Fabrication and Machine Shop
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots:
468
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
PACIFIC | 400G 10 |
PACIFIC 400 G10 1/2 INCH X 10' HYDRAULIC SHEAR W/ DRO COUNTER AND SPARE PARTS. CUTTING CAPACITY (MILD STEEL): 1/2 INCH X 10 AT 3/8 INCH RATED RAKE, MAX RAKE: 5/8 INCH PER FOOT, STROKES PER MINUTE: 14 SPM (36 SPM ON SHORT STROKE), HOLD-DOWN TONNAGE: 33 TONS, MAIN MOTOR: 40 HP, HOLD-DOWN CAPACITY: 33 TONS, BACK GAUGE: 36 INCH, SQUARING ARM: 100 INCH, DISTANCE BETWEEN SIDE HOUSINGS: 10'3 INCH, KNIFE SIZE: 1-1/8 INCH X 5 INCH X 124 INCH, KNIFE TRAVEL SPEEDS: 95/MIN (DOWN), 270/MIN (UP), ELECTRICAL: 460V, 3PH, 60HZ, EQUIPPED WITH: DRO COUNTER, OVERHEAD WORK LAMP, 8FT SQUARING ARM, BACK GAUGE, RONK 477CC-IF POWER FACTOR CORRECTION CAPACITOR, MACHINE WRENCHES, SPARE PARTS
|
🔒 Subscribe | |
|
|
MIDDLE BUNDLE OF (12) 10' X 5' SHEETS OF 0.1495 INCH (9 GA) HOT ROLLED CARBON STEEL. WEIGHT: 3774 LBS
|
🔒 Subscribe | |||
|
|
5' X 3.5' X 3' H BLACK METAL DUMPSTER W/ METAL PLATE COVER
|
🔒 Subscribe | |||
|
|
MILLER | MILLERMATIC 251 |
MILLER MILLERMATIC 251 MIG WIRE FEED WELDER ON CART. PROCESSES: MIG (GMAW), FLUX-CORED (FCAW), OUTPUT RANGE: 30-300 AMPS, RATED OUTPUT: 200A @ 28VDC, 60% DUTY CYCLE, INPUT POWER: 230V, SINGLE-PHASE, WIRE FEED SPEED: 50-700 IPM, WELDING MATERIAL THICKNESS RANGE: 22 GA TO 1/2" (STEEL), SPOOL CAPACITY: 4" OR 8" DIAMETER, WEIGHT: APPROX. 207 LBS, DIMENSIONS: 40" H X 19" W X 30" D, FEATURES: INFINITE VOLTAGE CONTROL, DIGITAL METERS FOR VOLTAGE AND WIRE SPEED, SOLID-STATE OUTPUT CONTACTOR, BUILT-IN GAS SOLENOID, FAN-ON-DEMANDTM, THERMAL OVERLOAD PROTECTION, EQUIPPED WITH: DIGITAL DISPLAY SCREEN, INTEGRATED RUNNING GEAR WITH CYLINDER RACK, MIG GUN, WORK CABLE AND CLAMP, REGULATOR/FLOWMETER WITH GAS HOSE, POWER CORD.
|
🔒 Subscribe | |
|
|
(3) 21' X 5' SHEETS OF STEEL - APPROX. 1/8-3/8 INCH
|
🔒 Subscribe | |||
|
|
CINCINNATI | CINTILATHE |
CINCINNATI 30 INCH X 132 INCH ENGINE LATHE W/ (2) PALLETS OF TOOLING AND ATTACHMENTS. APPROXIMATE SIZE: 30 INCH X 132 INCH, APPROX. SWING: 30 INCH, APPROX DISTANCE BETWEEN CENTERS: 132 INCH, SPINDLE RPM SPEEDS: 11-400, MOTOR: 220/440V, 7.5 HP, 3PH, 1260 RPM, INCLUDES: 20 INCH 4 JAW CHUCK, STEADY REST, TAILSTOCK, (2) PALLETS OF ADDITIONAL ASSORTED LATHE TOOLING AND ATTACHMENTS (2) CHUCKS, (2) STEAD RESTS, (1) FOLLOW REST, ASSORTED LATHE DOGS, PILLOW BLOCKS, STATIC CENTERS AND MORE
|
🔒 Subscribe | |
|
|
LINCOLN | CV 400 |
LINCOLN CV 400 MIG WELDER W/ LF-72 WIRE FEEDER ON CART, OUTPUT RANGE: 50-500 AMPS, RATED OUTPUT: 400A @ 36V, 100% DUTY CYCLE, INPUT VOLTAGE: 230/460V, 3 PHASE, WIRE SIZE RANGE: .023"-5/64" (0.6-2.0 MM), WELDING PROCESSES: MIG (GMAW), FLUX-CORED (FCAW), DIMENSIONS: 27" L X 19" W X 28" H, WEIGHT: APPROX. 375 LBS, EQUIPPED WITH: LINCOLN LF-72 WIRE FEEDER, VARIABLE SPEED CONTROL, 2-ROLL DRIVE SYSTEM, TWECO GUN AND CABLE ASSEMBLY, GROUND CLAMP AND CABLE, POWER CORD, REMAINING SPOOL OF COPPER WIRE ON MACHINE. S/N: U1160204851
|
🔒 Subscribe | |
|
|
CHICAGO DREIS & KRUMP | SB812 HAND (APRON) BRAKE |
CHICAGO DREIS & KRUMP SB812 HAND (APRON) BRAKE, BEND LENGTH: 97 INCH, CAPACITY (MILD STEEL): 12 GA, CAPACITY (STAINLESS STEEL): 16 GA, MAX OPENING: 2-1/4 INCH, MINIMUM FLANGE: 1 INCH, OVERALL DIMENSIONS: 141 INCH L 56 INCH W 65 INCH H, APPROX. WEIGHT: 3,300 LBS
|
🔒 Subscribe | |
|
|
RIDGID | 535 |
RIDGID NO. 535 PIPE & BOLT THREADER ON CART W/ DIE HEADS, DIES AND ACCESSORIES. INCLUDES: (3) RIDGID NO. 811A DIE HEADS, (8) 4PKS OF THREAD DIES, (2) MODEL MJ OIL PUMPS - CAT NO: 62052, CRATE OF USED PARTS, CART AND MANUAL
|
🔒 Subscribe | |
|
|
STACK OF 12 GA SHEETS / MISC. DROP - APPROX. (30) 5' X 4' SHEETS, APPROX. (40) 3' X 2' PIECES
|
🔒 Subscribe | |||
|
|
1996 | CLEMCO | 1648 CLASSIC BLAST MACHINE |
1996 CLEMCO BLAST MACHINE PACKAGE 3 CU.FT MODEL 1648 W/ (4) BAGS OF BLACK DIAMOND 2040 BLAST MEDIA. MEDIA CAPACITY: 3 CUBIC FEET (APPROXIMATELY 300 LBS OF EXPENDABLE MINERAL ABRASIVE), WORKING PRESSURE RATING: 125 PSIG @ 350F, ASME CERTIFIED PRESSURE VESSEL, EQUIPPED WITH: THE MAIN BLASTING POT, CLEMCO RLX PNEUMATIC CONTROL HANDLE, MANUAL FSV ABRASIVE METERING VALVE, AND (4) 100 LBS BAGS OF BLACK DIAMOND 2040 ABRASIVE MEDIA S/N:23710
|
🔒 Subscribe |
|
|
LOT OF (7) ASSORTED 12FT - 4FT PRESS BRAKE DIES AND DIE HOLDERS. INCLUDES: (1) 12FT BOTTOM DIE HOLDER IN TUBE, (1) 12FT BOTTOM V-DIE, (1) 6FT BOTTOM V-DIE, (1) 69 INCH TOP GOOSENECK DIE AND (1) 74 INCH BOTTOM DIE IN CRATE, (1) 6FT BOTTOM DIE HOLDER W/ (1) 6FT BOTTOM V-DIE, (1) 54 INCH TOP ACUTE DIE
|
🔒 Subscribe | |||
|
|
NUGIER | H50-14MD |
50 TON NUGIER H50-14MD H-FRAME HYDRAULIC PRESS, 50 TONS TONNAGE, 34 INCH W X 14 INCH H MATERIAL CAPACITY, EQUIPPED WITH: GE SPECTRA 700 START / STOP CONTROL, APPROX. 10 GALLON HYDRAULIC RESERVOIR TANK, MOTOR SPECS: 230/460V, 8.4/4.2 A, 3PH, 60HZ, 3HP, 1800 RPM S/N:0480076
|
🔒 Subscribe | |
|
|
RACK W/ MOSTLY FLAT BAR - APPROX. 15-25FT, SOME ANGLE, CHANNEL, AND TUBING
|
🔒 Subscribe | |||
|
|
(15) 10' X 5' SHEETS OF 9 GA HOT ROLLED CARBON STEEL, WEIGHT: 4717
|
🔒 Subscribe | |||
|
|
(4) VARIOUS SHALLOW METAL STORAGE BINS - APPROX. 4' X 3' / 3' X 2'
|
🔒 Subscribe | |||
|
|
DYNAMO | SBC990 |
4' X 3' DYNAMO SBC990 BLAST CABINET - W/ ACCESSORIES AND SPARE PARTS. WORK AREA: 46" W 34" D 33.5" H, OVERALL DIMENSIONS: APPROX. 52.4" W 49" D 69.5" H, WINDOW SIZE: 12.75" 27.25", GLOVES: 24" GAUNTLET STYLE, POWER REQUIRED: 120V, 60 HZ, 1210W, BUILT IN DUST COLLECTOR ON BACK OF CABINET, AIR REQUIREMENT: APPROXIMATELY 24 CFM AT 125 PSI, SHIPPING WEIGHT: ~500 LBS. EQUIPPED WITH: GLOVES, (2) SPRAY GUNS, HOSES, (2) SPARE MOTORS - (1) NEW, (1) USED, (2) SPARE CARTRIDGE FILTERS - (1) NEW, (1) USED
|
🔒 Subscribe | |
|
|
LINCOLN | CV 400 |
LINCOLN CV 400 MIG WELDER W/ LF-72 WIRE FEEDER ON CART. OUTPUT RANGE: 50-500 AMPS, RATED OUTPUT: 400A @ 36V, 100% DUTY CYCLE, INPUT VOLTAGE: 230/460V, 3 PHASE, WIRE SIZE RANGE: .023-5/64" (0.6-2.0 MM), WELDING PROCESSES: MIG (GMAW), FLUX-CORED (FCAW), DIMENSIONS: 27" L X 19" W X 28" H, WEIGHT: APPROX. 375 LBS, EQUIPPED WITH: LINCOLN LF-72 WIRE FEEDER, VARIABLE SPEED CONTROL, 2-ROLL DRIVE SYSTEM, GROUND CLAMP AND CABLE, POWER CORD. S/N: U1120407814
|
🔒 Subscribe | |
|
|
INGERSOLL RAND | 7100 |
INGERSOLL RAND 7100 TWO-STAGE HORIZONTAL PISTON AIR COMPRESSOR, 15/10 HP, 120-GALLON HORIZONTAL ASME RECEIVER TANK, ~35 CFM @ 175 PSI, 175 PSI MAXIMUM PRESSURE, 100% CAST-IRON PUMP, PRESSURE LUBRICATION, INTEGRAL FINNED COPPER INTERCOOLER, BELT-DRIVEN WITH ENCLOSED BELT GUARD, 230/460 V, 3-PHASE, INDUSTRIAL-DUTY BEARINGS AND VALVES, OVERSIZE INDUSTRIAL-GRADE INLET FILTERS, EASY-ACCESS OIL FILL AND DRAIN, ~77 L X 28 W X 50 H, ~940 LBS S/N:5027661
|
🔒 Subscribe | |
|
|
MOBILE RACK W/ ASSORTED SQUARE TUBING, FLAT/SQ BAR, & ANGLE BAR - APPROX. 15-25FT
|
🔒 Subscribe | |||
|
|
LINCOLN | CV 400 |
LINCOLN CV 400 MIG WELDER W/ LN-7 WIRE FEEDER ON CART, OUTPUT RANGE: 50-500 AMPS, RATED OUTPUT: 400A @ 36V, 100% DUTY CYCLE, INPUT VOLTAGE: 230/460V, 3 PHASE, WIRE SIZE RANGE: .023" TO 5/64" (0.6 TO 2.0 MM), WELDING PROCESSES: MIG (GMAW), FLUX-CORED (FCAW), DIMENSIONS: 27" L X 19" W X 28" H, WEIGHT: APPROX. 375 LBS, EQUIPPED WITH: LINCOLN LN-7 WIRE FEEDER, VARIABLE SPEED CONTROL, 2-ROLL DRIVE SYSTEM, GUN AND CABLE ASSEMBLY, GROUND CLAMP AND CABLE, POWER CORD, REMAINING SPOOL OF WIRE ON MACHINE. S/N: U1960104264
|
🔒 Subscribe | |
|
|
(15) 10' X 5' SHEETS OF 0.1495 INCH (9 GA) HOT ROLLED CARBON STEEL, WEIGHT: 4717
|
🔒 Subscribe | |||
|
|
BANDING CART ON PALLET W/ TOOLS, METAL BANDING CLIPS AND STEEL STRAPPING
|
🔒 Subscribe | |||
|
|
STACK OF VARIOUS SHEETS OF 3/16", 14 GA, 10 GA, AND 12GA. 3/16" - (3) ~10' X 5' SHEETS, (8) ~10' X 4' SHEETS 14 GA - (6) ~8' X 4' SHEETS 10 GA - (2) ~6' X 3' SHEETS 12 GA - (1) ~6' X 3' SHEETS
|
🔒 Subscribe | |||
|
|
LINCOLN | PRO-MIG 175 |
LINCOLN PRO-MIG 175 ON CART. MIG (GMAW) / FLUX-CORED (FCAW) WELDER, 30-175 AMPS OUTPUT RANGE, 130A @ 20V RATED OUTPUT, 30% DUTY CYCLE, 230V INPUT POWER, SINGLE-PHASE. WIRE FEED SPEED 50-700 IPM. WIRE DIAMETER CAPACITY: 0.025-0.035 INCH SOLID STEEL/STAINLESS, 0.030-0.045 INCH FLUX-CORED. DIMENSIONS: 14 INCH H X 10.15 INCH W X 18.1 INCH D. WEIGHT: APPROX. 66 LBS. FEATURES: INFINITE VOLTAGE CONTROL, ADJUSTABLE WIRE FEED SPEED, BUILT-IN GAS SOLENOID, THERMAL OVERLOAD PROTECTION, SPOOL GUN READY. EQUIPPED WITH: MAGNUM 100L MIG GUN, WORK CLAMP AND CABLE, GAS REGULATOR/FLOWMETER WITH HOSE, DRIVE ROLLS, (2) SPOOLS OF WIRE. S/N: U1041013066
|
🔒 Subscribe | |
|
|
RIDGID | 700 PORTABLE CORDED PIPE THREADER |
RIDGID 700 PORTABLE CORDED POWER DRIVE PIPE THREADER W/ DIES IN ORIGINAL METAL CASE. V: 116, A: 13.0, MAX RPM: 30, INCLUDES: (7) THREAD DIE HEADS FROM 3/8 TO 1-1/4 INCH, RIDGID SPIRAL PIPE REAMER, ORIGINAL METAL TOOL BOX CASE
|
🔒 Subscribe | |
|
|
CM | VALUSTAR |
CM VALUSTAR 1 TON ELECTRIC CHAIN HOIST W/ CONTROLLER (ORANGE)
|
🔒 Subscribe | |
|
|
STACK OF 10 GA SHEETS - APPROX. 4' X 2' - APPROX. (60-75) SHEETS
|
🔒 Subscribe | |||
|
|
HYPERTHERM | POWERMAX 1250 G3 SERIES |
HYPERTHERM POWERMAX 1250 G3 SERIES PLASMA CUTTER ON CART. OUTPUT CURRENT: 30-80 AMPS, DUTY CYCLE: 80% @ 80A, OUTPUT VOLTAGE: 140 VDC, INPUT VOLTAGE: 200-600V, 1 OR 3 PHASE, GAS TYPE: CLEAN, DRY, OIL-FREE AIR OR NITROGEN, GAS FLOW: 6.7 SCFM @ 90 PSI, SEVERANCE CUT CAPACITY: UP TO 1-1/2", RECOMMENDED CUT CAPACITY: 1", PIERCE CAPACITY: 3/4", TORCH TYPE: T80/T80M DURAMAX SERIES, OPERATING PRESSURE: 90 PSI, DIMENSIONS: 19.3" L X 11.8" W X 18.7" H, WEIGHT: 87 LBS, EQUIPPED WITH: QUICK-DISCONNECT TORCH, WORK CLAMP WITH CABLE, POWER CORD, AND CART.
|
🔒 Subscribe | |
|
|
12" CUSTOM BUILT SLIP ROLL. SIZE: 12" W, ROLL SIZE: 3" DIA, ELECTRICAL: 240V, 3PH
|
🔒 Subscribe | |||
|
|
FLEXARM | A-32 |
FLEXARM A-32 PNEUMATIC ARTICULATING TAPPING ARM W/ (4) TAPPING CHUCKS, HYDRAULIC LUBRICATING PUMP, SHOP MADE TAPPING CLAMP FIXTURES, STEEL TABLE
|
🔒 Subscribe | |
|
|
2004 | ALMI | AL 100 |
2004 ALMI AL 100 BELT SANDER W/ SPARE SANDING BELTS AND (2) SPARE ROLLERS, 230V, 60HZ, 3420 RPM, 520 LBS WEIGHT, BELT SIZE: 4' X 78', EQUIPPED WITH CONTROL BOX
|
🔒 Subscribe |
|
|
MOBILE RACK W/ ASSORTED RD/SQ TUBING, RD/SQ BAR, & CHANNEL BAR - APPROX. 20-25FT
|
🔒 Subscribe | |||
|
|
GRACO | PROXP 85 AA |
GRACO PROXP 85 AA ELECTROSTATIC AIR ASSISTED PAINT SPRAY GUN (NEW IN BOX)
|
🔒 Subscribe | |
|
|
FASTENAL, ATLAS FASTENERS |
(5) PALLETS AND METAL ORGANIZER CABINET INCLUDES BUT NOT LIMITED TO: VARIOUS NUTS, BOLTS, WASHERS, NAILS, SCREWS, O-RINGS, GEARS, 3FT HINGES, ROOFING NAILS, LARGE BOX OF ASSORTED BRICK RED AND WHITE ATLAS FASTENERS, 72 CUBBIE METAL HARDWARE ORGANIZER CABINET AND ALL STAINLESS STEEL HARDWARE CONTENTS.
|
🔒 Subscribe | ||
|
|
APPROX. (60) 42 INCH X 32 INCH BLACK PLASTIC DUMPSTER LIDS
|
🔒 Subscribe | |||
|
|
SPEEDMASTER | 3FT 10IN ARM ON 10IN COLUMN RADIAL ARM DRILL |
SPEEDMASTER 3' 10" ARM X 10" COLUMN RADIAL ARM DRILL, ARM LENGTH: 3FT 10IN, COLUMN DIAMETER: 10 IN, SPINDLE SPEEDS: 60-2100 RPM, INCLUDES: FIXTURE TABLE W/ CLAMPS, COOLANT PUMP, MOTOR: 220V, 3 PH, 5 HP, 1750, A: 13.6, HZ: 60, APPROX. SHIPPING WEIGHT: 6,000 LBS, APPROX. SHIPPING DIMENSIONS: 84 L X 40 W X 99 H
|
🔒 Subscribe | |
|
|
STACK OF 12 GA SHEETS / DROP: ~(10) 5'X4' SHEETS, ~(14) 4' X 4' SHEETS, ~(50) 42 INCH X 19 INCH PIECES
|
🔒 Subscribe | |||
|
|
LARGE INVENTORY OF ASSORTED PUNCH DIES
|
🔒 Subscribe | |||
|
|
WAGNER | PEM-X1 |
WAGNER PEMX1 ELECTROSTATIC POWDER COATING SPRAY GUN
|
🔒 Subscribe | |
|
|
TAPMATIC | 50X REVERSIBLE TAPPING ATTACHMENT |
TAPMATIC 50X REVERSIBLE TAPPING ATTACHMENT, CAP: M3-M12, #6-1/2", MAX RPM: 1500 S/N:33JT
|
🔒 Subscribe | |
|
|
LINCOLN | WIRE-MATIC 225 |
LINCOLN WIRE MATIC 225 MIG WELDER ON CART, MIG (GMAW) PROCESS, 30-250 AMPS OUTPUT RANGE, 200A @ 25V 60% DUTY CYCLE RATED OUTPUT, 230V SINGLE-PHASE INPUT POWER, 50-700 IPM WIRE FEED SPEED, 0.023"-0.045" SOLID STEEL/STAINLESS AND 0.035"-0.045" FLUX-CORED WIRE DIAMETER CAPACITY, 30" H X 19" W X 37" D DIMENSIONS, APPROX. 220 LBS WEIGHT, INFINITE VOLTAGE CONTROL, ADJUSTABLE WIRE FEED SPEED, BUILT-IN GAS SOLENOID, SPOOL GUN READY, THERMAL OVERLOAD PROTECTION. EQUIPPED WITH: MIG GUN, WORK CLAMP AND CABLE, DRIVE ROLLS, REGULATOR/FLOWMETER WITH GAS HOSE.
|
🔒 Subscribe | |
|
|
HOSSFELD | NO.2 |
HOSSFELD UNIVERSAL NO.2 MANUAL BENDER
|
🔒 Subscribe | |
|
|
CM | VALUSTAR |
CM VALUSTAR 1 TON ELECTRIC CHAIN HOIST W/ CONTROLLER (ORANGE)
|
🔒 Subscribe | |
|
|
INTERMARKET |
INTERMARKET 4400 LBS CAP. TRANSMISSION JACK
|
🔒 Subscribe | ||
|
|
LINCOLN, TWECO, ESAB |
PALLET OF ASSORTED LINCOLN, TWECO AND ESAB WELDING PARTS AND CONSUMABLES. INCLUDES (12) VARIOUS LINCOLN DRIVE ROLL KITS, IDLE ROLL ARM AND BEARING ASSEMBLY, ALCOTEC ER5356 WELDING WIRE, LINCOLN SPINDLE KITS - K162-1, ESAB OXY/GAS ARRESTOR FLASH, DRIVE HUB ASSEMBLY, LINCOLN MAGNUM WELD GUN PARTS
|
🔒 Subscribe | ||
|
|
APPROX. (60) 32 INCH X 31 INCH BLACK PLASTIC DUMPSTER LIDS
|
🔒 Subscribe | |||
|
|
4' X 4' X 5' WOODEN CRATE OF SWIVEL PLATE CASTERS (1/2 FULL)
|
🔒 Subscribe | |||
|
|
MILLER, THERMAL DYNAMICS | THUNDERBOLT 225V, STAK PAK |
PALLET & CRATE OF WELDERS, WIRE FEEDERS, WELD / PLASMA PARTS. INCLUDES: SAFETY SWITCH, LIGHT BALLASTS, CRANE CONTROLLERS, WORK LAMPS, MILLER THUNDERBOLT 225V WELDER, PAINT PUMP, ELECTRODE HOLDERS, CLAMPS, WELDING / PLASMA TORCHES, GRINDING WHEEL, ELECTRICAL WIRING, THERMAL DYNAMICS STAK PAK PLASMA CUTTER, CRATE OF LN-7 AND LF-72 WIRE FEEDERS (PARTS ONLY)
|
🔒 Subscribe | |
|
|
(7) VARIOUS ROLLER CONVEYORS - FROM 6'-10' L X 1'-3' W X ~3' H
|
🔒 Subscribe |
PACIFIC 400G 10
PACIFIC 400 G10 1/2 INCH X 10' HYDRAULIC SHEAR W/ DRO COUNTER AND SPARE PARTS. CUTTING CAPACITY (MIL...
MIDDLE BUNDLE OF (12) 10' X 5' SHEETS OF 0.1495 INCH (9 GA) HOT ROLLED CARBON STEEL. WEIGHT: 3774 LB
5' X 3.5' X 3' H BLACK METAL DUMPSTER W/ METAL PLATE COVER
MILLER MILLERMATIC 251
MILLER MILLERMATIC 251 MIG WIRE FEED WELDER ON CART. PROCESSES: MIG (GMAW), FLUX-CORED (FCAW), OUTPU...
(3) 21' X 5' SHEETS OF STEEL - APPROX. 1/8-3/8 INCH
CINCINNATI CINTILATHE
CINCINNATI 30 INCH X 132 INCH ENGINE LATHE W/ (2) PALLETS OF TOOLING AND ATTACHMENTS. APPROXIMATE SI...
LINCOLN CV 400
LINCOLN CV 400 MIG WELDER W/ LF-72 WIRE FEEDER ON CART, OUTPUT RANGE: 50-500 AMPS, RATED OUTPUT: 400...
CHICAGO DREIS & KRUMP SB812 HAND (APRON) BRAKE
CHICAGO DREIS & KRUMP SB812 HAND (APRON) BRAKE, BEND LENGTH: 97 INCH, CAPACITY (MILD STEEL): 12 GA, ...
RIDGID 535
RIDGID NO. 535 PIPE & BOLT THREADER ON CART W/ DIE HEADS, DIES AND ACCESSORIES. INCLUDES: (3) RIDGID...
STACK OF 12 GA SHEETS / MISC. DROP - APPROX. (30) 5' X 4' SHEETS, APPROX. (40) 3' X 2' PIECES
1996 CLEMCO 1648 CLASSIC BLAST MACHINE
1996 CLEMCO BLAST MACHINE PACKAGE 3 CU.FT MODEL 1648 W/ (4) BAGS OF BLACK DIAMOND 2040 BLAST MEDIA. ...
LOT OF (7) ASSORTED 12FT - 4FT PRESS BRAKE DIES AND DIE HOLDERS. INCLUDES: (1) 12FT BOTTOM DIE HOLDE
NUGIER H50-14MD
50 TON NUGIER H50-14MD H-FRAME HYDRAULIC PRESS, 50 TONS TONNAGE, 34 INCH W X 14 INCH H MATERIAL CAPA...
RACK W/ MOSTLY FLAT BAR - APPROX. 15-25FT, SOME ANGLE, CHANNEL, AND TUBING
(15) 10' X 5' SHEETS OF 9 GA HOT ROLLED CARBON STEEL, WEIGHT: 4717
(4) VARIOUS SHALLOW METAL STORAGE BINS - APPROX. 4' X 3' / 3' X 2'
DYNAMO SBC990
4' X 3' DYNAMO SBC990 BLAST CABINET - W/ ACCESSORIES AND SPARE PARTS. WORK AREA: 46" W 34" D 33.5" H...
LINCOLN CV 400
LINCOLN CV 400 MIG WELDER W/ LF-72 WIRE FEEDER ON CART. OUTPUT RANGE: 50-500 AMPS, RATED OUTPUT: 400...
INGERSOLL RAND 7100
INGERSOLL RAND 7100 TWO-STAGE HORIZONTAL PISTON AIR COMPRESSOR, 15/10 HP, 120-GALLON HORIZONTAL ASME...
MOBILE RACK W/ ASSORTED SQUARE TUBING, FLAT/SQ BAR, & ANGLE BAR - APPROX. 15-25FT
LINCOLN CV 400
LINCOLN CV 400 MIG WELDER W/ LN-7 WIRE FEEDER ON CART, OUTPUT RANGE: 50-500 AMPS, RATED OUTPUT: 400A...
(15) 10' X 5' SHEETS OF 0.1495 INCH (9 GA) HOT ROLLED CARBON STEEL, WEIGHT: 4717
BANDING CART ON PALLET W/ TOOLS, METAL BANDING CLIPS AND STEEL STRAPPING
STACK OF VARIOUS SHEETS OF 3/16", 14 GA, 10 GA, AND 12GA. 3/16" - (3) ~10' X 5' SHEETS, (8) ~10' X 4
LINCOLN PRO-MIG 175
LINCOLN PRO-MIG 175 ON CART. MIG (GMAW) / FLUX-CORED (FCAW) WELDER, 30-175 AMPS OUTPUT RANGE, 130A @...
RIDGID 700 PORTABLE CORDED PIPE THREADER
RIDGID 700 PORTABLE CORDED POWER DRIVE PIPE THREADER W/ DIES IN ORIGINAL METAL CASE. V: 116, A: 13.0...
CM VALUSTAR
CM VALUSTAR 1 TON ELECTRIC CHAIN HOIST W/ CONTROLLER (ORANGE)...
STACK OF 10 GA SHEETS - APPROX. 4' X 2' - APPROX. (60-75) SHEETS
HYPERTHERM POWERMAX 1250 G3 SERIES
HYPERTHERM POWERMAX 1250 G3 SERIES PLASMA CUTTER ON CART. OUTPUT CURRENT: 30-80 AMPS, DUTY CYCLE: 80...
12" CUSTOM BUILT SLIP ROLL. SIZE: 12" W, ROLL SIZE: 3" DIA, ELECTRICAL: 240V, 3PH
FLEXARM A-32
FLEXARM A-32 PNEUMATIC ARTICULATING TAPPING ARM W/ (4) TAPPING CHUCKS, HYDRAULIC LUBRICATING PUMP, S...
2004 ALMI AL 100
2004 ALMI AL 100 BELT SANDER W/ SPARE SANDING BELTS AND (2) SPARE ROLLERS, 230V, 60HZ, 3420 RPM, 520...
MOBILE RACK W/ ASSORTED RD/SQ TUBING, RD/SQ BAR, & CHANNEL BAR - APPROX. 20-25FT
GRACO PROXP 85 AA
GRACO PROXP 85 AA ELECTROSTATIC AIR ASSISTED PAINT SPRAY GUN (NEW IN BOX)...
FASTENAL, ATLAS FASTENERS
(5) PALLETS AND METAL ORGANIZER CABINET INCLUDES BUT NOT LIMITED TO: VARIOUS NUTS, BOLTS, WASHERS, N...
APPROX. (60) 42 INCH X 32 INCH BLACK PLASTIC DUMPSTER LIDS
SPEEDMASTER 3FT 10IN ARM ON 10IN COLUMN RADIAL ARM DRILL
SPEEDMASTER 3' 10" ARM X 10" COLUMN RADIAL ARM DRILL, ARM LENGTH: 3FT 10IN, COLUMN DIAMETER: 10 IN, ...
STACK OF 12 GA SHEETS / DROP: ~(10) 5'X4' SHEETS, ~(14) 4' X 4' SHEETS, ~(50) 42 INCH X 19 INCH PIEC
LARGE INVENTORY OF ASSORTED PUNCH DIES
WAGNER PEM-X1
WAGNER PEMX1 ELECTROSTATIC POWDER COATING SPRAY GUN...
TAPMATIC 50X REVERSIBLE TAPPING ATTACHMENT
TAPMATIC 50X REVERSIBLE TAPPING ATTACHMENT, CAP: M3-M12, #6-1/2", MAX RPM: 1500 S/N:33JT...
LINCOLN WIRE-MATIC 225
LINCOLN WIRE MATIC 225 MIG WELDER ON CART, MIG (GMAW) PROCESS, 30-250 AMPS OUTPUT RANGE, 200A @ 25V ...
HOSSFELD NO.2
HOSSFELD UNIVERSAL NO.2 MANUAL BENDER...
CM VALUSTAR
CM VALUSTAR 1 TON ELECTRIC CHAIN HOIST W/ CONTROLLER (ORANGE)...
INTERMARKET
INTERMARKET 4400 LBS CAP. TRANSMISSION JACK...
LINCOLN, TWECO, ESAB
PALLET OF ASSORTED LINCOLN, TWECO AND ESAB WELDING PARTS AND CONSUMABLES. INCLUDES (12) VARIOUS LINC...
APPROX. (60) 32 INCH X 31 INCH BLACK PLASTIC DUMPSTER LIDS
4' X 4' X 5' WOODEN CRATE OF SWIVEL PLATE CASTERS (1/2 FULL)
MILLER, THERMAL DYNAMICS THUNDERBOLT 225V, STAK PAK
PALLET & CRATE OF WELDERS, WIRE FEEDERS, WELD / PLASMA PARTS. INCLUDES: SAFETY SWITCH, LIGHT BALLAST...
(7) VARIOUS ROLLER CONVEYORS - FROM 6'-10' L X 1'-3' W X ~3' H