MultiFacility CNC Fab No Reserve Auction

2008 MORI SEIKI ZT2500Y CNC LATHE MAX SWING 27.7" MAX DIA (UPPER TURRET) 14.9" MAX DIA (LOWER TURRET) 14.1" MACHINING LENGTH 13.7" DISTANCE BETWEEN SPINDLE FACES 51.2" # AXIS 7 THROUGH SPINDLE HOLE 3.5" POWER 30 HP MAX RPM (MAIN) 4,000 RPM MAX RPM (SUB) 4,000 RPM MAX RPM (LIVE TOOLING) 4,000 RPM X-AXIS TRAVEL (TURRET 1/TURRET 2) 11" / 7.9" Z-AXIS TRAVEL (TURRET 1/TURRET 2) 37.8" / 38.8" Y-AXIS TRAVEL 2.8" C-AXIS ROTATION 0.001 SPINDLE NOSE (MAIN) A2-8 SPINDLE NOSE (SUB) A2-8 TAILSTOCK NO LIVE TOOLING YES SUB SPINDLE YES RAPID TRAVERSE (X/Z) 945 IN/MIN. RAPID TRAVERSE (Y) 472 IN/MIN. TURRET CAPACITY (UPPER) 12 TURRET CAPACITY (LOWER) 12 MADE IN JAPAN CONTROL CNC (MSX-501 III) EQUIPPED WITH: TWIN TURRETS LIVE TOOLING (BOTH TURRETS) Y-AXIS (UPPER TURRET) SUB-SPINDLE B-AXIS C-AXIS TOOL PRESETTER CHIP CONVEYOR LIVE & STATIC TOOL HOLDERS COLLETS SPINDLE LINERS DIMENSIONS 165.5" X 108.9" X 109.3" WEIGHT 29,000 LB

2014 KEYENCE IM-6225 CMM 0.4" LCD MONITOR FIELD OF VIEW: (WIDE) 3.94" X 7.87" FIELD OF VIEW: (HIGH PRECISION) 0.98" X 4.92" HARD DISK DRIVE: 250 GB Z STAGE MOVING RANGE: 1.18" (30 MM) X STAGE MOVING RANGE: 3.94" (100 MM) X STAGE WITHSTAND LOAD: 4.4 LBS (2 KG) POWER SUPPLY: VOLTAGE: 100 TO 240 VAC 50/60 HZ POWER CONSUMPTION: 310 VA MAX

EMPIRE E-10019 SHOT PEENING + SAND BLASTING ADJUSTABLE MACHINE; CABINET ONLY, CHAMBER SIZE: 36" X 48" 1/4", ONE PCS FLOW MACHINE, DC DRIVE NOZZLE OSCILLATION, DC DRIVE PART ROTATION DC NOZZLE OSCILLATION ( NOZZLE STROKES UP AND DOWN ) WILL HANDLE PART UP TO 24" DIA X 30' TALL CHAMBER SIZE: 36" X 48" 1/4" ALL RUBBER LINED VERTICAL DOOR 480 V 546 HRS. ON THE MACHINE DC NOZZLE OSCILLATION DC PART ROTATIONS

2018 DORSEY 24P 24" OPTICAL COMPARATOR ILLUMINATION PROFILE: BUILT-IN 24V/150W DIRECT COLLIMATED HALOGEN. SURFACE: BUILT-IN 24V/250W VIA FIBER OPTICS. SCREEN SIZE 24 (600MM) GROUND GLASS WITH CROSS-LINES STAGE CAST IRON, NICKEL PLATED, 36 X 8, TRIPLE DOVETAILS STAGE TRAVEL X = 24 (610MM), MOTORIZED Y = 10 (250MM), MOTORIZED FOCUS = 3 (75MM), MOTORIZED STAGE ACCURACY WITHIN +/- 0.004MM +[(L/20).001] LINEAR SCALE RESOLUTION STANDARD: 0.00025MM/.000010 REPEATABILITY OF SCALES +/- 1 SCALE COUNT (0.0005MM/.00002) OPTICAL ACCURACY WITHIN +/- .10% PROFILE, +/- .15% SURFACE POWER REQUIREMENTS 120V OR 240V AC, 50/60 HZ, 10 AMP EQUIPPED WITH: 10X AND 20X LENSES

2004 KITAKO MT4-200 HORIZONTAL TURNING CENTER NUMBER OF SPINDLES (4) CHUCK SIZE 8" TOOL TURRETS: (2) 8 POSITION MAX TURNING DIAMETER 7.9" MAX TURNING LENGTH 6.3" X=6.7" Z=9.84" RAPID X=1181 IPM RAPID Z=1181 IPM SPINDLE NOSE A2-6 SPINDLE SPEED: 4000 RPM MOTOR: 20 HP EQUIPPED WITH: FANUC 18I-TB CONTROL CHIP CONVEYOR MOTOMAN UP6 5-AXIS ROBOT W/ YASNAC XRC 2001 PENDANT CONTROL

2006 BROWN & SHARPE GLOBAL ADVANTAGE 5-7-5 MEASURING RANGES: X-AXIS: 19.7" Y-AXIS: 27.6" Z-AXIS: 19.7" EQUIPPED WITH: PC-DMIS 4.2 SOFTWARE, PC-DMIS GEAR V1.8 SOFTWARE, RENISHAW PH-10M PROBE HEAD, RENISHAW PHC 10-2 PROBE HEAD CONTROLLER, RENISHAW PI 200 PROBE INTERFACE, RENISHAW SP25M SCANNING PROBE, RENISHAW SM25-2 SCANNING MODULE KIT, CALIBRATION SPHERE, FIXTURE PLATE, PROBE RACK, JOYSTICK, STYLI AND ACCESSORIES,

1998 OKUMA CROWN L1060 CNC LATHE MAX TURNING DIAMETER: 10.63 MAX TURNING LENGTH: 19.68 DISTANCE BETWEEN CENTERS: 22.29 SWING OVER CROSS SLIDE: 15.75 MAX. BAR CAPACITY....2.625" X AXIS TRAVEL: 7.28 Z AXIS TRAVEL: 20.47 RAPID TRAVERSE X AXIS: 590 IPM RAPID TRAVERSE Z AXIS: 787 IPM SPINDLE NOSE: A2-8 SPINDLE SPEED: 65 3500 RPM SPINDLE MOTOR: 20 HP TURRET CAPACITY: 12 STATIONS TURRET INDEX TIME: 1 SECOND TAILSTOCK TAPER: MT-5 TAILSTOCK QUILL DIA.: 3.54 TAILSTOCK QUILL TRAVEL: 4.72 EQUIPPED WITH: CHIP CONVEYOR OKUMA OSP-U10L CONTROL TAILSTOCK

1983 OKUMA 2SP-35H DISTANCE BETWEEN CENTERS THREADING: APPROX. 17.70 HORSEPOWER (HP) 25 HP SPEED RANGE (RPMS) 35-3500 RPM FEEDS (RANGE) TURRET 1&2 - 8.86/9.06 ADDITIONAL TOOLING/CHUCKS? 2 CHUCKS 2 TURRETS TWIN SPINDLE MACHINE CHUCK SIZE- 10 CHUCK TYPE- 3 JAW BOTH CHUCKS CONTROL: FANUC 18-T EQUIPPED WITH: FANUC 18-T CONTROL CHIP CONVEYER

GIDDINGS & LEWIS RETROFIT HORIZONTAL BORING MILL X TRAVEL: 72 Y TRAVEL: 51 Z TRAVEL: 47 MAX WEIGHT: 20,000 LBS MAX RPM: 5,000 TABLE SIZE: 42 X 71 SPINDLE SIZE: CAT50 4 RETROFIT INCLUDED: NEW HEIDENHEIN CONTROL NEW SPINDLE MOTOR NEW DRIVES EQUIPPED WITH: NO TOOL CHANGER HEIDENHEIN TNC530 CONTROL ALLEN BRADLEY SC DRIVES

2017 HARMONY M42HD BALER BALE SIZE: 22 X 42 X 30 BALE WEIGHT (OCC): 300 LBS. FEED OPENING: 19X 42 RAM FORCE: 41,350 LBS. VOLUME: SMALL-MEDIUM RECYCLABLE MATERIALS: SHRINK WRAP, ALUMINUM, OCC, PAPER, & PLASTICS. EQUIPPED WITH: ALL HARDWIRING

2000 OKUMA CROWN L1060 CNC LATHE MAX TURNING DIAMETER: 10.63 MAX TURNING LENGTH: 19.68 DISTANCE BETWEEN CENTERS: 22.29 MAX BAR CAPACITY: 2.75" SWING OVER BED: 21.65 SWING OVER CROSS SLIDE: 15.75 X AXIS TRAVEL: 7.28 Z AXIS TRAVEL: 20.47 RAPID TRAVERSE X AXIS: 590 IPM RAPID TRAVERSE Z AXIS: 787 IPM SPINDLE NOSE: A2-8 SPINDLE BORE: 3.15 SPINDLE SPEED: 65 3500 RPM SPINDLE MOTOR: 20 HP TURRET CAPACITY: 12 STATIONS TURRET INDEX TIME: 1 SECOND TAILSTOCK TAPER: MT-5 TAILSTOCK QUILL DIA.: 3.54 TAILSTOCK QUILL TRAVEL: 4.72 EQUIPPED WITH: OKUMA OSP-U10L CONTROL CHIP CONVEYOR TAILSTOCK

MARATHON V-6030-HD CYLINDER (BORE, ROD, STROKE) 6" X 3.5" X 48" 152MM X 89MM X 1219MM PUMP FLOW (GEAR PUMP) 10.5 GPM 39.7 LPM MOTOR 10 HP (1,460 RPM) 7.46 KW SYSTEM PRESSURE 2,000 PSI 137.9 BAR MAXIMUM SYSTEM PRESSURE 2,200 PSI 151.7 BAR PLATEN FORCE 62,200 LBS. 277 KN PLATEN-FORCE PRESSURE 37 PSI 255 KPA CYCLE TIME 56 SECONDS UNIT WEIGHT 4,800 LBS. 2177 KG ELECTRICAL EQUIPMENT ELECTRICAL 208/230/460 3-PHASE ELECTRICAL CONTROL VOLTAGE 120 VAC OFF/ON SECURITY KEY SWITCH; 3-POSITION SELECTOR SWITCH; EMERGENCY STOP BUTTON; IEC MOTOR STARTER AND OVERLOAD, PROGRAMMABLE SMART RELAY UL AND CUL LISTED BALE SIZE DATA BALE SIZE (W X D X H) 60" X 30" X 48" 1524MM X 762MM X 1219MM BALE VOLUME 50 FT3 1.42 M3 BALE WEIGHT (OCC) UP TO 1,100 LBS. 499 KG NUMBER OF BALE TIES CHAIN EJECT MODEL: (5) 14 GA. X 14' L AUTOMATIC EJECT MODEL: (6) 14 GA. X 14' L STRUCTURAL INFORMATION BODY SIDE PLATES 7 GA. BODY FLOOR 7 GA. FLOOR PLATE, 6" (152 MM) STRUCTURAL CHANNEL FLOOR STRUCTURE 6" (152MM) STRUCTURAL CHANNEL TOP CYLINDER SUPPORTS HEAVY 8" (203MM) STRUCTURAL CHANNEL INTEGRATED INTO MAIN FRAME OF 8" (203MM) 11.5" STRUCTURAL CHANNEL AND 1" X 10" (25MM X 254MM) PLATE BEAM WITH 1" (25MM) PINNING PLATE PLATEN FACE 14" (6MM) PLATE, 6" (152MM) STRUCTURAL CHANNELS AND TUBES BALE DOOR 7 GA. DOOR PLATE, 4" X 4" STRUCTURAL TUBE-TOP RAIL EJECTOR MANUALLY ENGAGED, CHAIN TYPE / OPTIONAL AUTO-EJECT PAINT PRIMER BOTTOM COAT; INDUSTRIAL GRADE TOP COAT, LOW VOC, HIGH SOLIDS BALE WEIGHTS OF UP TO 1,100 LBS

2006 BOMAR EXTEND 1000.820 DOUBLE COLUMN BAND SAW CUTTING CAPACITY: 39" X 32" SAW BAND DIMENSIONS (L X H X W) 30' 5" X 2-1/8" (2-5/8") X 0.063" SAW DRIVE: 10.2 HP (12.2HP) BLADE SPEED: 50 -295 FPM DIMENSIONS (170" X 60" X 126") WEIGHT: 18,500 LBS. VOLTAGE: 230 V / 60 HZ / 3-PHASE EQUIPPED WITH: FULLY REFURBISHED IN 2022 SEMI-AUTOMATIC, DOUBLE COLUMN CONSTRUCTION JVC TRANSFORMER INCLUDED FULLY HYDRAULIC FEED FORCE CONTROL SEMI-AUTOMATIC CUTTING CYCLE HYDRAULIC CONTROLLED DOWN FEED SAW BLADE TENSION & BREAKAGE MONITOR HEIGHT SETTING OF THE SAW HEAD FROM THE CONTROL PANEL SAW HEAD FILLED WITH POLYMER CASTING SAFETY SWITCH ON BAND WHEEL DOOR FREE STANDING PLC CONTROL INTEGRATED COOLANT SYSTEM CARBIDE SAW BLADE GUIDES INFINITELY ADJUSTABLE SPEED HYDRAULIC CLAMPING VISE CHIP BRUSH DIGITAL SPEED DISPLAY

1976 LEBLOND REGAL HOLE THRU SPINDLE 1.5 SWING OVER BED WAYS, RATED 15" SWING OVER BED WAYS, ACTUAL 15.5" SWING OVER CROSS-SLIDE 9.5" DISTANCE BETWEEN CENTERS 54" CROSS-SLIDE CROSS-FEED TRAVEL 8.875" COMPOUND-REST TRAVEL 3.875" TAILSTOCK, SPINDLE DIAMETER 1.94" TAILSTOCK, SPINDLE TRAVEL 5" TAILSTOCK, SPINDLE TAPER #3 MT (12) SPINDLE SPEEDS, RANGE 30 TO 1200 RPM (48) CARRIAGE LONGITUDINAL FEEDS .0018 TO .104 IPR (48) METRIC CARRIAGE LONG FEEDS .045 TO 2.4 MMPR (48) THREAD CHANGES, RANGE 2 TO 112 TPI METRIC THREAD CHANGES, RANGE 1 T0 12 MM PITCH MAIN MOTOR, HORSEPOWER 5 HP ELECTRICAL SYSTEM 220-440/3/60 CURRENTLY ON A ROTARY 3-PHASE CONVERTER WEIGHT, APPROXIMATELY 3100 LBS EQUIPPED WITH: TRAK102 X AND Z DIGITAL READOUT; SERVO-SHIFT HYDRAULIC SHIFTING; 10" 3-JAW CHUCK W/JAWS; REPLACEABLE HARDENED & GROUND BEDWAYS; INCH/METRIC SWITCHABLE QUICK CHANGE GEAR BOX; TURRET DEPTH STOP - THREADING DIAL; REMOVABLE CHIP PAN

2003 MAZAK QT-N 250 WITH PARTS CATCHER MAZATROL 640T NEXUS PC FUSION CNC CONTROL SWING: 26.5" TURNING DIAMETER: 14.75" CENTER DISTANCE: 29.85" CHUCK SIZE: 10" BAR CAPACITY: 3" X AXIS TRAVEL: 9" Z AXIS TRAVEL: 22.63" SPINDLE NOSE: A2-8 TURRET CAPACITY: 12 POSITIONS SPINDLE SPEED: 4,000 RPM MAIN MOTOR: 30 HP EQUIPPED WITH CHIP CONVEYOR MANUALS 5 TOOL HOLDERS ON THE TURRET 10" HARD JAWS CHUCK

1999 WHITNEY 3500 ATC PLASMA PUNCH PUNCHING FORCE: 40 TONS MATERIAL THICKNESS MIN. 0.035" MAX. 0.500" MAX. PUNCH DIAMETER OR EQUIVALENT SHAPE 5.000" PUNCHING CAPACITY: 0.250" MATERIAL= 5.000" 0.375" MATERIAL= 2.750" 0.500" MATERIAL= 1.000" HIT RATE AND ACCURACY (IN 10 GAGE MATERIAL) ON 1" CENTERS: 165 HPM POSITIONING AREA: X-AXIS: 90" Y-AXIS: 50" POSITIONING SPEED: PER AXIS: 1,200 IN/MIN POSITIONING ACCURACY: POSITIONING AREA: +- 0.005" MAX PIECE PART 1200 IPM= 650 LBS. MAX. BLANK SIZE: W/ NO AUXILLARY TABLES 50"X72" WITH (2) AUXILLARY TABLES 50"X120" TOOL CHANGER 130" PRESS FRAME AND POWER ISLAND 97" EQUIPPED WITH: ALL TOOLING AND DIE SETS INCLUDED (75+ TOOLS) PLASMA POWER SUPPLY: HYPERTHERM, HT2000 SHIPPING WEIGHT: 45,000 LBS. MACHINE DIMENSIONS: 300"X230" (BASE MACHINE ONLY)

2008 HYUNDAI KIA SKT200TTSY CNC LATHE SWING OVER BED / SWING OVER SADDLE: 30.7 / 29.1 MAXIMUM TURNING DIAMETER UPPER / LOWER: 15.4 / 11.8 MAXIMUM TURNING DIAMETER LENGTH: 36.2 MAIN SPINDLE SPEED: 50 5000 RPM SPINDLE BORE / BAR CAP / SPINDLE NOSE: 3.1 / 2.56 / A2-8 MOTOR (30 MIN. / CONT.): 33 / 20 HP SUB-SPINDLE: SPEEDS: 50 5000 RPM SPINDLE BORE / BAR CAP / SPINDLE NOSE / INDEXING: 3.1 / 2.56 / A2-8 MOTOR (30 MIN. / CONT.): 33 / 20 HP TURRETS: NUMBER OF POSITIONS: TWO (2) 12 STATIONS TRAVELS: X-AXIS TRAVEL (UPPER / LOWER TURRET): 10.63 / 7.48 Z-AXIS TRAVEL (UPPER / LOWER TURRET): 36.22 / 11.3 Y-AXIS TRAVEL: + / 4.7 B-AXIS TRAVEL (SUB-SPINDLE): 39.4 C-INDEXING (BOTH SPINDLES): 360000 ROTARY TOOL SPEED: 4000 RPM ROTARY TOOL MOTOR: 7.3 / 5 HP RAPID TRAVERSE (X / Z): 1181 IPM SUB SPINDLE RAPID TRAVERSE: 787 IPM EQUIPPED WITH: LNS TURBO CHIP CONVEYOR COOLANT TANK TOOL PRESETTER REMOTE JOG HANDLE PARTS CATCHER BARFEED INTERFACE

1992 ACCURPRESS 7606 HYDRAULIC PRESS BRAKE TONNAGE: 60 TON LENGTH: 6FT DISTANCE BETWEEN HOUSING: 52" RAM STROKE: 8" OPEN HEIGHT: 14" CLOSED HEIGHT: 6" THROAT DEPTH: 8" SPEEDS: 130 IPM (FAST) / 25IPM (SLOW) MOTOR HP: 10 ELECTRICAL: 230V / 3PH EQUIPPED WITH: RAM CLAMPS DIE RAIL BACK GAUGE ACCURPRESS PEDESTAL CONTROL HYDRAULIC SYSTEM ACCUPRESS CONTROL ELECTRIC FOOT SWITCH GAP IN SIDE FRAMES STROKE CONTROL ACCURPRESS CNC GAUGE SYSTEM CONTROL DIMENSIONS: 88 X 42 X 74 TALL WEIGHT: 6,000 LBS

2005 ACCURPRESS 713012 PRESS BRAKE TONNAGE 130 LENGTH OF BED 144" DISTANCE BETWEEN HOUSINGS 124" RAM OPEN HEIGHT 14" RAM CLOSED HEIGHT 6" RAM STROKE LENGTH 8" THROAT DEPTH 10" MAIN MOTOR 20 HP WIRED 460/60/3 ESTIMATED DIMENSIONS 167" X 56" X 86" ESTIMATED WEIGHT 17,000 LBS. RAM FAST APPROACH SPEED 115 IPM RAM SLOW BEND SPEED 24 IPM RAM FAST RETURN SPEED 180 IPM EQUIPPED WITH: ACCURPRESS GAUGING SYSTEMS BACKGAUGE ETS CONTROL

TAURING ALFA40H1 ANGLE BENDING ROLL DRIVING ROLLS: 3 SHAFT SPEED: 7.7-15.6 LEG IN ANGLE CAPACITY: 2" X 2" X 3/16" LEG OUT ANGLE CAPACITY: 2 3/8" X 2 3/8" X 3/16" SQUARE BAR CAPACITY: 1 1/4" X 1 1/4" ROUND BAR CAPACITY: 1 3/8" APPROX. DIMENSIONS: 25" X 38" X 42"

MINSTER 75 TON OBI PRESS TONNAGE 75 STROKE 6" RAM ADJUSTMENT 3.75" SHUT HEIGHT BOLSTER- 12" BED-15.5" BED SIZE 24" X 36" SPEED 55 SPM CLUTCH AIR PRESSURE 55 PSI EQUIPPED WITH: AIR CLUTCH DUAL PALM BUTTONS FOR OPERATION BOLSTER PLATE ELECTRIC CONTROLS

PACIFIC 110-10 HYDRAULIC PRESS BRAKE TONNAGE 110 OVERALL LENGTH 10' DISTANCE BETWEEN HOUSINGS 8'6" CAPACITY 9' X 3/16" MILD STEEL STROKE 8" SHUT HEIGHT 13" THROAT 6" APPROX SPEEDS RAPID ADVANCE ................ 134 IPM FAST PRESSING ................ 60 IPM SLOW PRESSING ................ 15 IPM RETURN ....................... 148 IPM EQUIPPED WITH: ELECTRICAL CONTROLS, HYDRAULIC SYSTEM, RAM CLAMPS, BACK GAUGE,

RICHARDS MULTIFORM BENDER 1/4" X 4" CAPACITY BENDING CAPACITY 5/16" X 4" MILD STEEL 7/16" X 4" MILD STEEL* 9/16" X 2" MILD STEEL* 15/16" SQ. MILD STEEL 1/2" X 4" COPPER & ALUMINUM EQUIPPED WITH: VERSATILE VARIABLE SPEED RAM BENDER ADJUSTABLE RAM STOP FOR ACCURATE, REPEATABLE BENDS BEND HUNDREDS OF SHAPES WITH MULTIPLE TOOLS APPROX DIMENSIONS: 4' X 3' X 3.5"

2014 MITUTOYO CRYSTA-PLUS M574 X-AXIS - 19.69" Y-AXIS - 27.56" Z-AXIS - 15.75" LENGTH STANDARD - REFLECTIVE LINEAR ENCODER RESOLUTION - 0.00002" GUIDE METHOD - AIR BEARING FOR EACH AXIS CLAMPING METHOD - QUICK AIR CLAMP FOR EACH AXIS MEASURING TABLE (MATERIAL) - GRANITE MEASURING TABLE (WORKING AREA) - 25.12" X 45.67" MEASURING TABLE (TAPPED INSERT) - M8 X 1.25" (FOR CLAMPING WORKPIECE) WORKPIECE (MAX. HEIGHT) - 20.08" WORKPIECE (MAX. WEIGHT) - 396LBS AIR PRESSURE - 0.4MPA OR 58PSI AIR CONSUMPTION - 50L/MIN OR 1.8CFM (UNDER NORMAL CONDITION) DIMENSIONS: 42.6 X 57.4 X 89.96 EQUIPPED WITH: CALIBRATION - UP TO DATE RENISHAW MH20I PROBEHEAD CALIBRATION SPHERE COMPUTER MCOSMOS V 4.2R3 SOFTWARE MITUTOYO ECO-FIX KIT STYLI & ACCESSORIES MANUALS

2008 MITSUBISHI EA 28VM EDM SINKER TABLE SIZE-L 33.4" TABLE SIZE-W 23.6" TABLE CAPACITY 4,400 POUNDS MAX WORKPIECE SIZE 41.3" X 29.9" X 13.8" X-AXIS TRAVEL 25.6" Y-AXIS TRAVEL 17.7" Z-AXIS TRAVEL 13.8" TOOL CHANGER CAPACITY: 20 TOOLS POWER PACK 120 AMPERES DIMENSIONS 87" X 99" X 103" WEIGHT 12,000 POUNDS EQUIPPED WITH: MITSUBISHI M700 CONTROL, TOOL CHANGER WITH 20 TOOL CAPACITY, HIGH SPEED JUMP, FIRE EXTINGUISHER SYSTEM, 3R MACRO CHUCK, DROP TANK, CHILLER, TRANSFORMER, C-AXIS ENABLED (ROTARY NOT INCLUDED)

2001 GARDNER-DENVER EBQ99F21 AIR COMPRESSOR HP- 150 PSI- 100 CFM- 495 DIMENSIONS: 182" X 59" X 80" WEIGHT: 6500 LBS

2021 KEYENCE VL-500 3D SCANNER CMM OPTICAL TRANSMITTER SYSTEM: HIGH-BRIGHTNESS DUAL PROJECTOR MODULE OPTICAL RECEIVER SYSTEM- LOW/HIGH MAGNIFICATION OFFSET DUAL OPTICAL MODULE WITH WIDE DYNAMIC RANGE ILLUMINATION SYSTEM MEASUREMENT LIGHT SOURCE BLUE LED COLOR TEXTURE LIGHT SOURCE LEDS IN 3 COLORS (RED, GREEN, BLUE) CAPTURED DATA FORMAT: FULL-COLOR TEXTURED 3D MESH DATA REPEATABILITY: 2 M MEASUREMENT ACCURACY: 10 M MEASUREMENT RESOLUTION: 9 MILLION POINTS MEASUREMENT MODES: LOW MAGNIFICATION (WIDE FIELD) HIGH SPEED, NORMAL, FINE HIGH MAGNIFICATION (HIGH RESOLUTION) NORMAL, FINE MEASUREMENT RANGE: LOW MAGNIFICATION (WIDE FIELD) 300 H 200 MM (11.81" H 7.87") HIGH MAGNIFICATION (HIGH RESOLUTION) 70 H 50 MM (2.76" H 1.97") STAGE CONFIGURATION: MOTORIZED XY STAGE MECHANISM STAGE TOP PANEL SIZE 500 MM 19.69" STAGE ROTATION 360 (INFINITE ROTATION) STAGE MOVEMENT RANGE 200 MM (7.87") TILT MECHANISM UP TO 45 LOAD CAPACITY 50 KG (110.23 LBS.) EQUIPPED WITH: CALIBRATION BOARD ACCESSORY SET VL-A2E KEYENCE CALIBRATION BALL GAUGE SET VL-B1 KEYENCE COMPARISON SOFTWARE VL-H2P KEYENCE GD&T SOFTWARE VL-H2G

2009 CHARMILLES CUT 20P WIRE EDM X-AXIS TRAVEL 13.8" Y-AXIS TRAVEL 9.8" Z-AXIS TRAVEL 9.8" U/V AXIS TRAVEL 1.7" X 1.7" DEGREE TAPER CUTTING 30 DEGREES INSIDE TANK DIMENSIONS 33.4" X 26.8" WIRE DIAMETER .006" - .012" WIRE SPOOL SIZE 11 LBS MAX WORKPIECE DIMS 33.43" X 26.77" X 9.84" MAX WORKPIECE WEIGHT 882 LBS TANK SIZE 41.3" X 30.1" X 22" TABLE SIZE 27.55" X 18.89" WATER TANK CAPACITY (CLEAN) 53 GAL WATER TANK CAPACITY (DIRTY) 159 GAL EQUIPPED WITH: CHILLER AUTO WIRE THREADING MACHINE WEIGHT 6,613 LBS MACHINE SIZE 99" X 99" X 87"

2001 MORI SEIKI MV-653/50 VERTICAL MACHINING CENTER Y AXIS TRAVEL: 60" X AXIS TRAVEL: 25.9" Z AXIS TRAVEL: 25.5" SPINDLE MOTOR: 25 HP SPINDLE SPEED: 6,000 RPM SPINDLE TAPER: 50 TOOL CHANGER: 60 TOOL ATC RAPID RATE X AXIS: 944 IPM RAPID RATE Y AXIS: 944 IPM RAPID RATE Z AXIS: 944 IPM TABLE SIZE: 66.9" X 25.9" DIMENSIONS: 179" X 162" X 131" WEIGHT: 35,200 LBS EQUIPPED WITH: AUTOMATIC PALLET CHANGER, CHIP CONVEYOR, YAMAZEN VEGA 2000 - 2000 PSI COOLANT SYSTEM, 60 TOOL ATC

1985 KAESER KK 700 AIR COMPRESSOR PSI: 150 HP: 5 230/460 V

1981 KINGSTON HL2000 GAP BED ENGINE LATHE SWING OVER BED: 21" SWING OVER CROSS SLIDE: 13 3/8" SWING IN GAP: 28 3/16" LENGTH OF GAP IN FRONT OF FACE PLATE: 6 15/16" DISTANCE BETWEEN CENTERS: 80" HOLE THROUGH SPINDLE: 3 1/8" RANGE OF SPINDLE SPEEDS (12 SPEEDS): 25 -1500 RPM TAILSTOCK SPINDLE DIAMETER: 2 9/16" TAILSTOCK SPINDLE TRAVEL: 5 7/8" TAILSTOCK CENTER: MT #4 MAIN DRIVE MOTO: 10 HP DIMENSIONS: 182" X 59" X 80" WEIGHT: 6500 LBS EQUIPPED WITH: STEADY REST MISC TOOLING 4 JAW CHUCK NEWALL DP 700 DRO

2007 OKK VM-7III VERTICAL MACHINING CENTER TABLE SIZE: 60.24 X 29.13 TABLE CAPACITY: 3,300 POUNDS X-AXIS TRAVEL: 61 Y-AXIS TRAVEL: 29 Z-AXIS TRAVEL: 26 SPINDLE TAPER: CAT 50 SPINDLE SPEED: 6,000 RPM SPINDLE MOTOR: 30 HP TOOL CHANGER CAPACITY: 30 EQUIPPED WITH: FANUC SERIES 160IS-MB CONTROL COOLANT THRU SPINDLE (HIGH PRESSURE - 1100 PSI) CHIP CONVEYOR BOX WAYS REMOTE HANDHELD MANUAL PULSE GENERATOR (MPG) FULL ENCLOSURE

2013 KAESER AS 30 AIR COMPRESSOR W/ TC 31 KAESER AIR DRYER AIR COMPRESSOR SPECS: HP: 25 CFM: 115 PSI: 110 3 PHASE 60 HZ VOLTAGE: 230/460 HOURS:9300 AIR DRYER : PSI: 230 S/N: 1779

2006 TOYODA AWEA BM1200 CNC MILL # AXIS: 3 TABLE SIZE: 51.1" X 23.6" TABLE CAPACITY: 2,654 POUNDS X-AXIS TRAVEL: 51.1" Y-AXIS TRAVEL: 23.6" Z-AXIS TRAVEL: 23.6" SPINDLE TAPER: CAT 50 SPINDLE SPEED: 8,000 RPM (UPGRADED NEW SPINDLE) MAIN MOTOR: 20 HP TOOL CHANGER CAPACITY: 24 COOLANT THRU SPINDLE: YES MACHINE WEIGHT: 16,600 POUNDS EQUIPPED WITH: BRAND NEW SPINDLE HIGH AND LOW RANGE GEAR BOX 1000 PSI HIGH PRESSURE THRU COOLANT INCLUDED

1997 FADAL 3016HT VERTICAL MILLING MACHINE X TRAVEL: 30" Y TRAVEL: 16" Z TRAVEL: 20" RAPID RATE X AXIS: 400 IPM RAPID RATE Y AXIS: 400 IPM RAPID RATE Z AXIS: 400 IPM TABLE SIZE: 39" X 16" MAX TABLE LOAD: 1000 LBS SPINDLE MOTOR: 15 HP SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: 21 ATC DIMENSIONS: 98" X 88" X 96" WEIGHT: 8,500 LBS

1980 CINCINNATI H250N SHEAR (1980) 3/8 X 12 CINCINNATI SHEAR YEAR OF MANUFACTURE: 1980 MAXIMUM THICKNESS .375 MAXIMUM SHEET WIDTH 144 480 VOLT/ 3PH/ 3PH WEIGHT: 37,500 LBS. EQUIPPED WITH: SQUARING GUIDE MICRO ADJUST BACK STOP

1996 TRUMPF TRUMATIC 200 TURRET PUNCH PUNCH CAPACITY: 20 TONS MAX SHEET METAL THICKNESS: .250" (6.4 MM) MAX WORKPIECE WEIGHT: 330.69 LBS. (150 KG) MAX PUNCHING DIAMETER:3" (76.2 MM) SHEET SIZE:81.50" (2070 MM) X 50.393" (1280 MM) EQUIPPED WITH: CNC CONTROL SETUP TOOLING ASSORTED LOT OF TOOLING

1989 PHOENIX VTC-3010 VERTICAL BORING MILL CNC TRACING MILL X AXIS TRAVEL: 80" Y AXIS TRAVEL: 40" Z AXIS TRAVEL: 40" TABLE SIZE: 180" X 43" SPINDLE SPEED: 3,000 RPM TAPER: 50 HP: 29 EQUIPPED WITH: DUPLICATING CAPABILITY FANUC 11M CONTROL BOX WAYS UNDER POWER NEW POWER DRAW BAR INCON CONTROL CREATIVE EVOLUTION CNC CONTROL USED TO SPEED UP INFORMATION PROCESSING FOR 3D CONTOURING