Precision Machine Shop Closure Dallas TX

CONSOLIDATED ELECTRODYNAMICS 24-120B LEAK DETECTOR

(6) DELTA DRILL PRESSES GANG DRILL - (6) DELTA DRILL PRESSES ASSEMBLY W/ WORK BENCH, GANG DRILL SPECIFICATIONS: 101"L X 29"D X 32" T - TABLE

BLUE M ESP-166EX 10KW MECHANICAL CONVECTION OVEN SN: PB-1116 SPECIFICATIONS: 208V/3PH/60CY 316F MAX TEMP 10KW 1HP MOTOR

PAY ATTENTION TO ITEM LOCATION - ASSETS ARE LOCATED IN FORNEY, TX. MAKE SURE TO CHECK ITEM LOCATION BEFORE BIDDING. FOR EXACT ADDRESS PLEASE REFER TO WINNERS EMAIL INVOICE.

TOOLS MAY BE REQUIRED TO PICK UP YOUR PURCHASES - YOU MAY NEED TOOLS TO PICKUP YOUR ITEMS. WE DO NOT HAVE TOOLS AVAILABLE FOR DISASSEMBLY OF YOUR PURCHASES.

RIGGING AND REMOVAL INFORMATION - PICKUP / REMOVAL DATES & TIMES: MAY 12- 23, 2025 . PICK UP IS BY APPOINTMENT ONLY, MONDAY-FRIDAY. ALL INFORMATION FOR PICK-UP WILL BE ON THE WINNERS EMAIL INCLUDING EXACT ADDRESS AND POINT OF CONTACT.

2021 MICRO DYNAMICS MEGA 40V VERTICAL MACHINING CENTER W/CHIP CONVEYOR, LOW HOURS - 2021 MICRO DYNAMICS MEGA 40V VERTICAL MACHINING CENTER, VMC W/CHIP CONVEYOR, LOW HOURS SN: 120-00070 SPECIFICATIONS: HOURS: 1763 TRAVEL: X-AXIS: 40.2" (1,020 MM) Y-AXIS: 20.1" (510 MM) Z-AXIS: 20.1" (510 MM) DISTANCE BETWEEN SPINDLE FACE AND TABLE: 3.9" 24.0" (100 MM 610 MM) SPINDLE COLUMN DISTANCE: 21.7" (550 MM) TABLE: SIZE: 44.1" 19.7" (1,120 MM 500 MM) MAXIMUM LOAD: 2,204.6 LBS (1,000 KG) T-SLOT DIMENSIONS: 0.7" 3.9" 0.2" (18 MM 100 MM 5 MM) DISTANCE FROM FLOOR TO TABLE: 33.1" (840 MM) SPINDLE: SPEED: 15,000 RPM INNER DIAMETER OF SPINDLE BEARING: 2.8" (70 MM) MAXIMUM CUTTING TORQUE: 104.1 FT-LB (141 NM) SPINDLE ACCELERATION (0 TO MAX): 44,318 RPM/SEC SPINDLE STOP (MAX TO 0): 44,230 RPM/SEC FEEDRATES: RAPID TRAVERSE RATES: X-AXIS: 2,047.2 IN/MIN (52,000 MM/MIN) Y-AXIS: 2,047.2 IN/MIN (52,000 MM/MIN) Z-AXIS: 1,889.8 IN/MIN (48,000 MM/MIN) CUTTING FEEDRATE: 0 787.4 IN/MIN (0 20,000 MM/MIN) MACHINE WEIGHT: APPROXIMATELY 12,377.3 LBS (5,620 KG) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2020 MICRO DYNAMICS MEGA 40V CNC VERTICAL MACHINING CENTER, 1883 HOURS - 2020 MICRO DYNAMICS MEGA 40V VMC W/ CHIP CONVEYOR, TOOLING AND VISE SHOWN SN:120-00035 SPECIFICATIONS: HOURS: 1883 TRAVEL X-AXIS: 40" Y-AXIS: 20" Z-AXIS: 20" SPINDLE NOSE TO TABLE SURFACE: 3.9" 24" SPINDLE CENTER TO COLUMN FRONT: 21.7" TABLE SIZE: 44.1" 19.7" MAXIMUM LOAD: 2,205 LBS HEIGHT FROM GROUND: 33.1" SPINDLE TAPER: 40 TAPER DUAL CONTACT INNER DIAMETER OF SPINDLE BEARING: 2.75" SPEED RANGE: 50 15,000 RPM MAXIMUM POWER: 41 HP MAXIMUM CUTTING TORQUE: 104 FT-LBF MAXIMUM SPEED FOR RIGID TAPPING: 6,000 RPM RAPID FEEDRATE: X-AXIS: 2,047 IPM Y-AXIS: 2,047 IPM Z-AXIS: 1,889 IPM CUTTING FEEDRATE: 0 787 IPM AUTOMATIC TOOL CHANGER (ATC) MAGAZINE CAPACITY: 40 TOOLS TOOL SELECTION: BI-DIRECTION / RANDOM TOOL SHANK TYPE: BT40 / CAT40 PULL STUD TYPE: JIS6339 / CAT DIN 40 MAXIMUM TOOL DIAMETER: WITH ADJACENT TOOL: 3" WITHOUT ADJACENT TOOL: 6" MAXIMUM TOOL LENGTH: 11.8" MAXIMUM TOOL WEIGHT: 16 LBS PERIPHERAL POWER CONSUMPTION (220V/3PH): 30 KVA PNEUMATIC SUPPLY: 0.6 MPA (ANR) CUTTING COOLANT PUMP MOTOR: 1.5 HP BASE WASH PUMP MOTOR: 1.5 HP COOLANT THROUGH SPINDLE (CTS) PUMP MOTOR (OPTIONAL): 4 HP COOLANT TANK CAPACITY: 79 GALLONS FOOTPRINT SIZE (W D): 119.8" 90.3" MACHINE HEIGHT: 111.1" PACKING SIZE (W D H): 130" 91" 100.4" MACHINE NET WEIGHT: 12,368 LBS MACHINE GROSS WEIGHT: 12,897 LBS ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2018 LEADWELL V-40I 4 AXIS CNC VERTICAL MACHINING CENTER, 4TH AXIS ROTARY INDEXER LOW HOURS, 4TH AXIS ROTARY INDEXER SN: L2TAG05546 SPECIFICATIONS: HOURS SHOWING: 777 TRAVEL: X-AXIS: 40" (1,016 MM) Y-AXIS: 25" (635 MM) Z-AXIS: 19.2" (488 MM) TABLE: SIZE: 13.8" (350 MM) DIAMETER MAXIMUM LOAD: 440 LBS (200 KG) SPINDLE: TYPE: CAT-40 TAPER SPEED: UP TO 12,000 RPM MOTOR POWER: 25 HP (18.6 KW) AUTOMATIC TOOL CHANGER (ATC): CAPACITY: 24 TOOLS TYPE: ARM-STYLE CHANGER RAPID TRAVERSE RATES: X AND Y-AXIS: UP TO 1,417 IPM (36 M/MIN) Z-AXIS: UP TO 1,417 IPM (36 M/MIN) MACHINE DIMENSIONS AND WEIGHT: LENGTH: 117" (2,972 MM) WIDTH: 115" (2,921 MM) HEIGHT: 101" (2,565 MM) WEIGHT: APPROXIMATELY 13,668 LBS (6,200 KG) CONTROL SYSTEM: FANUC OI-MD CHIP MANAGEMENT: DUAL INTERIOR CHIP AUGERS AND A SIDE-DISCHARGE CHIP CONVEYOR COMES WITH WORKBENCH AND CONTENTS WORK BENCH 60"L X 30"D X 31"T

2020 MICRO DYNAMICS MEGA 30VT 5 AXIS TRUNNION TYPE CNC VERTICAL MACHINING CENTER. VMC SN: 140-00025 SPECIFICATIONS: X-AXIS: 30" (762 MM) Y-AXIS: 20" (508 MM) Z-AXIS: 17.3" (440 MM) SPINDLE: TYPE: CAT-40 TAPER SPEED: UP TO 15,000 RPM MOTOR POWER: 31 KW (41 HP) PEAK TORQUE: 141 NM AUTOMATIC TOOL CHANGER (ATC): CAPACITY: 40 TOOLS EQUIPPED WITH: MICRO DYNAMICS' PROPRIETARY HMI CHIP CONVEYOR WORK BENCH - 60"L X 34"D X 30"T

2020 MICRO DYNAMICS MEGA 30VT 5 AXIS TRUNNION TYPE CNC VERTICAL MACHINING CENTER - 2020 MICRO DYNAMICS MEGA 30VT 5 AXIS CNC VERTICAL MACHINING CENTER W/CHIP CONVEYOR & TRUNNION S/N: 140-00031 SPECIFICATIONS: TRAVEL: X-AXIS: 30" (762 MM) Y-AXIS: 20" (508 MM) Z-AXIS: 17.3" (440 MM) SPINDLE: TYPE: CAT-40 TAPER SPEED: UP TO 15,000 RPM MOTOR POWER: 31 KW (41 HP) PEAK TORQUE: 141 NM AUTOMATIC TOOL CHANGER (ATC): CAPACITY: 40 TOOLS EQUIPPED WITH: MICRO DYNAMICS' PROPRIETARY HMI CHIP CONVEYOR VISE SHOWN

2016 LEADWELL V-40I VERTICAL MACHINING CENTER W/ CHIP CONVEYOR, LOW HOURS. VMC W/ CHIP CONVEYOR, LOW HOURS SPECIFICATIONS: HOURS: 551 TRAVEL: X-AXIS: 40" (1,016 MM) Y-AXIS: 25" (635 MM) Z-AXIS: 19.2" (488 MM) TABLE: SIZE: 13.8" (350 MM) DIAMETER MAXIMUM LOAD: 440 LBS (200 KG) SPINDLE: TYPE: CAT-40 TAPER SPEED: UP TO 12,000 RPM MOTOR POWER: 25 HP (18.6 KW) AUTOMATIC TOOL CHANGER (ATC): CAPACITY: 24 TOOLS TYPE: ARM-STYLE CHANGER RAPID TRAVERSE RATES: X AND Y-AXIS: UP TO 1,417 IPM (36 M/MIN) Z-AXIS: UP TO 1,417 IPM (36 M/MIN) MACHINE DIMENSIONS AND WEIGHT: LENGTH: 117" (2,972 MM) WIDTH: 115" (2,921 MM) HEIGHT: 101" (2,565 MM) WEIGHT: APPROXIMATELY 13,668 LBS (6,200 KG) CONTROL SYSTEM: FANUC OI-MD CHIP MANAGEMENT: DUAL INTERIOR CHIP AUGERS AND A SIDE-DISCHARGE CHIP CONVEYOR

2020 MICRO DYNAMICS MEGA 30VT 5 AXIS TRUNNION TYPE CNC VERTICAL MACHINING CENTER, VMC SN:140-00020 SPECIFICATIONS: X-AXIS: 30" (762 MM) Y-AXIS: 20" (508 MM) Z-AXIS: 17.3" (440 MM) SPINDLE: TYPE: CAT-40 TAPER SPEED: UP TO 15,000 RPM MOTOR POWER: 31 KW (41 HP) PEAK TORQUE: 141 NM AUTOMATIC TOOL CHANGER (ATC): CAPACITY: 40 TOOLS EQUIPPED WITH: MICRO DYNAMICS' PROPRIETARY HMI CHIP CONVEYOR WORKBENCH

1998 AMADA RG-80 80 TON X 8' HYDRAULIC PRESS BRAKE, NC9-EXII CONTROL SN: 811623 SPECIFICATIONS: PRESS CAPACITY: 80 TONS MAXIMUM BENDING LENGTH: 98.7" (2,507 MM) DISTANCE BETWEEN UPRIGHTS: 80.8" (2,052 MM) STROKE LENGTH: 3.94" (100 MM) OPEN HEIGHT: 14.58" (370 MM) THROAT DEPTH: 15.76" (400 MM) APPROACH SPEED: 106"/MIN FORMING SPEED: 19"/MIN RETURN SPEED: 122"/MIN MAIN MOTOR POWER: 7.5 HP MACHINE DIMENSIONS (L W H): APPROX. 98" 56" 81" MACHINE WEIGHT: APPROX. 11,200 LBS

2006 LEADWELL MCV-2200 CNC VERTICAL MACHINING CENTER, 94.4" X 37.7" TABLE - 2006 LEADWELL MCV-2200 VERTICAL MACHINING CENTER, VMC W/ CHIP CONVEYOR, FANUC OI-MC CNC CONTROL, SPECIFICATIONS: TABLE SIZE: 94.4" (LENGTH) X 37.7" (WIDTH) X-AXIS TRAVEL: 86.6" Y-AXIS TRAVEL: 40" Z-AXIS TRAVEL: 31.4" TABLE LOAD CAPACITY: 6,000 LBS MAX CLEARANCE (TABLE TOP TO SPINDLE NOSE): 41" FEED RATES (ALL AXES): 0.1" TO 400" PER MINUTE RAPID TRAVERSE RATE (ALL AXES): 590" PER MINUTE SPINDLE HORSEPOWER: 35 HP SPINDLE SPEED RANGE: 30 6,000 RPM SPINDLE TAPER: CAT 50 TOOL MAGAZINE CAPACITY: 32 TOOLS APPROX. MACHINE DIMENSIONS: 205" X 182" X 134" APPROX. MACHINE WEIGHT: 48,000 LBS 220V 35KVA 60HZ S/N: L2TJE0698

KEYENCE XM-5000 BENCHTOP CMM KEYENCE IMAGE DIMENSION MEASURING SYSTEM, CMM'S, COMPUTER, MANUALS KEYENCE XM HANDHELD CMM KEYENCE IM-7001 COMPUTER COMES WITH SOFTWARE ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2018 LEADWELL T-206 CNC LATHE, TURNING CENTER, CHIP CONVEYOR, LOW HOURS SN: L2TAG0091 SPECIFICATIONS: POWER ON HOURS: 5128 CHUCK SIZE: 10" BAR CAPACITY: 3" SPINDLE POWER: 25 HP MAXIMUM SPINDLE SPEED: 3,500 RPM CONTROL SYSTEM: CNC MACHINE DIMENSIONS: APPROXIMATELY 72" (L) X 60" (W) X 79" (H) MACHINE WEIGHT: APPROXIMATELY 7,716 LBS EQUIPPED WITH: PICTURED TOOLING COLLET CHUCKS FANUC OI- TF CNC CONTROL TAILSTOCK

2011 LEADWELL V-40 4 AXIS CNC VERTICAL MACHINING CENTER, VMC SN: L2TAJ0869 SPECIFICATIONS: POWER ON HOURS: 23025 CUTTING TIME: 5551 HRS TABLE SIZE: 47.2" 19.6" (1,200 MM 500 MM) MAXIMUM TABLE LOAD: 1,100 LBS (500 KG) TRAVEL: X-AXIS TRAVEL: 40" (1,020 MM) Y-AXIS TRAVEL: 20" (510 MM) Z-AXIS TRAVEL: 24" (610 MM) SPINDLE: SPEED RANGE: 80 8,000 RPM MOTOR POWER: 25 HP (18.6 KW) SPINDLE TAPER: CAT 40 AUTOMATIC TOOL CHANGER (ATC): TOOL CAPACITY: 24 TOOLS FEEDRATES: RAPID TRAVERSE (X & Y): 787 IPM (20 M/MIN) RAPID TRAVERSE (Z): 590 IPM (15 M/MIN) CONTROL SYSTEM: FANUC OI-MB MACHINE DIMENSIONS: FOOTPRINT: APPROX. 117" 115" 101" (2,972 MM 2,921 MM 2,565 MM) MACHINE WEIGHT: APPROX. 13,000 LBS (5,897 KG) WORK BENCH 108"L X 34"D X 34"T ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2011 LEADWELL V-40 4 AXIS CNC VERTICAL MACHINING CENTER, CART OF TOOLING, WORKBENCH INCLUDED, 4TH AXIS ROTARY INDEXER S/N: L2TAJ1137 SPECIFICATIONS: POWER ON TIME: 22,346 CUTTING TIME: 5646 TRAVEL: X-AXIS: 40" (1,020 MM) Y-AXIS: 25" (635 MM) Z-AXIS: 24" (610 MM) TABLE: SIZE: 47.2" 19.6" (1,200 MM 500 MM) MAX LOAD: 1,100 LBS (500 KG) SPINDLE: SPEED RANGE: 80 8,000 RPM MOTOR POWER: 12 HP (9 KW) TAPER: BT-40 AUTOMATIC TOOL CHANGER (ATC): TOOL CAPACITY: 20 24 TOOLS FEEDRATES: RAPID TRAVERSE (X & Y): 787 IPM (20 M/MIN) RAPID TRAVERSE (Z): 590 IPM (15 M/MIN) CONTROL SYSTEM: FANUC OI-MD MACHINE DIMENSIONS: FOOTPRINT: 118" 110" 118" (3,000 MM 2,800 MM 3,000 MM) MACHINE WEIGHT: 14,336 LBS (6,500 KG) WORK BENCH 169"L X 32"D X 36"T

2014 LEADWELL V-60 CNC VERTICAL MACHINING CENTER (60" X 30")TRAVELS - 2014 LEADWELL V-60 CNC VERTICAL MACHINING CENTER, VMC, FANUC CONTROL SN: L1SIH0714 SPECIFICATIONS: POWER ON TIME: 2615HRS CUTTING TIME: 362HRS TABLE: TABLE SIZE: 61" 29.5" (1,550 MM 750 MM) MAXIMUM TABLE LOAD: 3,000 LBS (1,360 KG) TRAVEL: X-AXIS TRAVEL: 60" (1,520 MM) Y-AXIS TRAVEL: 30" (760 MM) Z-AXIS TRAVEL: 28.3" (720 MM) SPINDLE: SPINDLE SPEED: 8,000 12,000 RPM (VARIES BY CONFIGURATION) SPINDLE TAPER: CAT-40 OR BT-40 MOTOR POWER: 35 47 HP (VARIES BY CONFIGURATION) AUTOMATIC TOOL CHANGER (ATC): TOOL CAPACITY: 24-TOOL ARM-TYPE CHANGER FEEDRATES: RAPID TRAVERSE (X & Y): 944 IPM (24 M/MIN) RAPID TRAVERSE (Z): 787 IPM (20 M/MIN) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2014 LEADWELL LTC-20C CNC LATHE, FANUC CONTROL, CHIP CONVEYOR - 2014 LEADWELL LTC-20C CNC LATHE W/CHIP CONVEYOR SN:L2TAD0048 SPECIFICATIONS: POWER ON HOURS: 13,311 CUTTING TIME: 4384 CHUCK SIZE: 8" BAR CAPACITY: 2.6" MAXIMUM SPINDLE SPEED: 4,000 RPM SWING OVER BED: 17.7" MAXIMUM TURNING DIAMETER: 12.6" MAXIMUM TURNING LENGTH: 19.6" SPINDLE NOSE: A2-6 SPINDLE BORE: 2.4" SPINDLE MOTOR POWER: 20 HP X-AXIS TRAVEL: 6.2" Z-AXIS TRAVEL: 21" RAPID TRAVERSE RATE (X AND Z): 787.4" PER MINUTE TURRET POSITIONS: 8 TO 12 STATIONS (VARIES BY CONFIGURATION) TAILSTOCK: YES CONTROL SYSTEM: CNC

2015 LEADWELL LTC-20C CNC LATHE, FANUC OI-TD, CHIP CONVEYOR SPECIFICATIONS: POWER ON TIME: 8164 HRS CUTTING TIME: 1960 HRS CHUCK SIZE: 8" BAR CAPACITY: 2.6" MAXIMUM SPINDLE SPEED: 4,000 RPM SWING OVER BED: 17.7" MAXIMUM TURNING DIAMETER: 12.6" MAXIMUM TURNING LENGTH: 19.6" SPINDLE NOSE: A2-6 SPINDLE BORE: 2.4" SPINDLE MOTOR POWER: 20 HP X-AXIS TRAVEL: 6.2" Z-AXIS TRAVEL: 21" RAPID TRAVERSE RATE (X AND Z): 787.4" PER MINUTE TURRET POSITIONS: 8 TO 12 STATIONS (VARIES BY CONFIGURATION) TAILSTOCK: YES CONTROL SYSTEM: CNC ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2012 LEADWELL LTC-20B CNC LATHE, FANUC CONTROL, CHIP CONVEYOR - 2012 LEADWELL LTC-20B CNC LATHE, CNC TURNING CENTER, W/CHIP CONVEYOR, FANUC CONTROL SN: L2TAA0557 SPECIFICATIONS: POWER ON TIME: 16,243 HRS CUTTING TIME: 3773 HRS SWING OVER BED: 17.7" (450 MM) MAXIMUM TURNING DIAMETER: 12.6" (320 MM) MAXIMUM TURNING LENGTH: 19.7" (500 MM) BAR CAPACITY: 2.6" (65 MM) CHUCK SIZE: 8" TRAVEL: X-AXIS TRAVEL: 6.3" (160 MM) Z-AXIS TRAVEL: 21.3" (540 MM) SPINDLE: SPEED RANGE: UP TO 4,000 RPM SPINDLE BORE: 2.6" (65 MM) SPINDLE MOTOR POWER: 20 HP (15 KW) SPINDLE NOSE: A2-6 TURRET: NUMBER OF TOOL POSITIONS: 12 MACHINE DIMENSIONS: LENGTH WIDTH HEIGHT: APPROX. 143.8" 46.9" 78" WEIGHT: APPROX. 10,582 LBS (4,800 KG) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2017 UNIVERSAL ROBOTS UR10 ROBOT WITH CONTROL PENDANTS S/N: 2017305210 SPECIFICATIONS: LONG REACH: 1300 MM (51.2 IN). PAYLOAD: 10 KG (22 LB). REPEATABILITY: 0.10 MM (0.0039 IN). DEGREES OF FREEDOM: 6. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2011 LEADWELL LTC-20B CNC LATHE W/CHIP CONVEYOR , LOW HOURS - 2011 LEADWELL LTC-20B CNC TURNING CENTER W/CHIP CONVEYOR , LOW HOURS SN: LT2AA0128 SPECIFICATIONS: POWER ON HOURS: 4860 CHUCK SIZE: 8" BAR CAPACITY: 2.6" SWING OVER BED: 17.7" MAXIMUM TURNING DIAMETER: 12.6" MAXIMUM TURNING LENGTH: 19.6" DISTANCE BETWEEN CENTERS: 25.2" X-AXIS TRAVEL: 6.3" Z-AXIS TRAVEL: 21.3" RAPID TRAVERSE RATE (X-AXIS): 787.4" PER MINUTE RAPID TRAVERSE RATE (Z-AXIS): 787.4" PER MINUTE SPINDLE BORE: 2.56" SPINDLE NOSE: A2-6 SPINDLE SPEED RANGE: 45 4,500 RPM SPINDLE MOTOR POWER: 20 HP TURRET POSITIONS: 12 STATIONS TAILSTOCK: YES CONTROL SYSTEM: FANUC SERIES OI-TD APPROXIMATE MACHINE DIMENSIONS: 127" (L) X 86" (W) X 73" (H) APPROXIMATE MACHINE WEIGHT: 10,600 LBS

AMADA VIPROS 357 30 TON TURRET PUNCH W/ LISTA TOOLBOX OF TOOLING SN: VP305072 SPECIFICATIONS: AMADAN-04P-C CONTROLLER PRESS CAPACITY: 30 TO 33 TONS (APPROXIMATELY 300 KN) TURRET CONFIGURATION: NUMBER OF STATIONS: APPROX. 58, INCLUDING 2 AUTO-INDEX STATIONS MAXIMUM HOLE DIAMETER: UP TO 4.5" (114.3 MM) SHEET HANDLING: MAXIMUM SHEET SIZE: 50" X 144" (1,270 MM X 3,658 MM) WITH REPOSITIONING MAXIMUM SHEET THICKNESS: UP TO 0.25" (6.35 MM) MAXIMUM SHEET WEIGHT: APPROXIMATELY 220 LBS (100 KG) AXIS TRAVEL: X-AXIS TRAVEL: 72" (1,829 MM) Y-AXIS TRAVEL: 50" (1,270 MM) PERFORMANCE: POSITIONING SPEED: UP TO 1,968 INCHES PER MINUTE (50 M/MIN) TURRET ROTATION SPEED: APPROXIMATELY 30 RPM HIT RATES: UP TO 315 HITS PER MINUTE (HPM) AT 0.079" (2 MM) PITCH APPROXIMATELY 275 HPM AT 0.315" (8 MM) PITCH ACCURACY: PUNCHING ACCURACY: 0.004" (0.1 MM) MACHINE DIMENSIONS AND WEIGHT: FOOTPRINT: APPROXIMATELY 181" X 148" X 88" (4,600 MM X 3,759 MM X 2,235 MM) WEIGHT: AROUND 29,700 LBS (13,500 KG) ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2001 LEADWELL V-60 CNC VERTICAL MACHINING CENTER, VMC, WORKBENCH AND TOOLING INCLUDED S/N: L2TJJ0306 SPECIFICATIONS: POWER ON TIME: 21943HRS CUTTING TIME: 6991HRS TABLE: TABLE SIZE: 61" 29.5" (1,550 MM 750 MM) MAXIMUM TABLE LOAD: 3,000 LBS (1,360 KG) TRAVEL: X-AXIS TRAVEL: 60" (1,520 MM) Y-AXIS TRAVEL: 30" (760 MM) Z-AXIS TRAVEL: 28.3" (720 MM) SPINDLE: SPINDLE SPEED: 8,000 12,000 RPM (VARIES BY CONFIGURATION) SPINDLE TAPER: CAT-40 OR BT-40 MOTOR POWER: 35 47 HP (VARIES BY CONFIGURATION) AUTOMATIC TOOL CHANGER (ATC): TOOL CAPACITY: 24-TOOL ARM-TYPE CHANGER FEEDRATES: RAPID TRAVERSE (X & Y): 944 IPM (24 M/MIN) RAPID TRAVERSE (Z): 787 IPM (20 M/MIN) INCLUDED: WORK BENCH 96"L X 32"D X 37"T

WYSONG H-2510 1/4" X 10' SHEAR, PC100 SHEAR GAUGE S/N: H2-154 SPECIFICATIONS: 1/4" MILD STEEL CAPACITY CUTTING CAPACITY: MAXIMUM CUTTING LENGTH: 120" (10 FEET) MAXIMUM MATERIAL THICKNESS: 0.25" (1/4") MILD STEEL RAKE ANGLE: 3/8" STROKES PER MINUTE (SPM): FULL LENGTH STROKE: 21 SPM SHORT STROKE: 45 SPM NUMBER OF HOLD-DOWNS: 16 TOTAL HOLD-DOWN TONNAGE: 32 TONS MOTOR AND POWER: MAIN MOTOR: 15 HP POWER REQUIREMENTS: 575V, 3-PHASE, 60 HZ DIMENSIONS AND WEIGHT: OVERALL LENGTH: 125" OVERALL WIDTH: 87" OVERALL HEIGHT: 65" APPROXIMATE WEIGHT: 20,000 LBS OIL BARRELS NOT INCLUDED ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

HYSTER S50XM 5,000 LBS PROPANE FORKLIFT CAPACITY: 4650 LBS BATTERY IS CURRENTLY DEAD S/N: D187V27513A

HYSTER S50XM 5,000 LBS LP FORKLIFT, 13,593 HRS - HYSTER S50XM 5,000 LB PROPANE FORKLIFT, 13,593 HRS SN: D187V04939T SPECIFICATIONS: CAPACITY: 4950 LBS STARTS AND RUNS

MITUTOYO B-241 GRANITE MEASURING TABLE W/ MICROMETERS S/N: 810425

LNS Q.L. SERVI S3 BAR FEEDER SPECIFICATIONS: MAIN VOLTAGE 400V 3PH 50/60HZ 0.2KW CONTROL VOLTAGE 24VDC 1A 1FLA ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY. S/N: 1800210004

1977 TARNOW X3000 ENGINE LATHE W/ TAILSTOCK & VICE SN: 493 SPECIFICATIONS: 115" ALONG THE WAYS 11" IN BETWEEN WAYS 14" CHUCK

TESA-HITE MAGNA DIGITAL HEIGHT GAUGE

BRIDGEPORT SERIES I KNEE MILL W/ DRO, POWERFEED, WORKBENCH & TOOLING SN: 202999 SPECIFICATIONS: STANDARD 42 X 9 T SLOT CENTER DISTANCE 3 @ 2.5 CENTERS T-SLOT SIZE 0.625 EQUIPPED WITH: WORKBENCH VICE, TOOLING, DRO, POWERFEED

(3) SHELVES OF MACHINE ATTACHMENTS, TAILSTOCKS, VICES, ETC. MACHINE BRACKETS SHOWN ARE NOT INCLUDED

TOOLING TOOLBOX W/ CONTENTS

2022 FARO PLATINUM FAROARM, HIGH-PRECISION, PORTABLE MEASUREMENT ARM W/ COMPUTER, TV, WORKBENCH & TOOLS, ALL CONTENTS INCLUDED WORKBENCH DIMENSIONS 55"W X 137"L X 40"T COMPUTER HAS SOFTWARE FOR THE FARO ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

BRIDGEPORT SERIES I KNEE MILL W/ DRO, POWERFEED, WORKBENCH & TOOLING SN: 210484 SPECIFICATIONS: STANDARD 42 X 9 T SLOT CENTER DISTANCE 3 @ 2.5 CENTERS T-SLOT SIZE 0.625 EQUIPPED WITH: POWER FEED, DRO, TOOLING, VICE, GRANITE MEASURING BLOCK, CHUCKS & COLLETS, C CLAMPS

MR DEBURR 500 DEBURRING MACHINE W/MEDIA

BRIDGEPORT KNEE MILL, DRO, POWERFEED, WORKBENCH, TOOLING, KENNEDY BOX SN:159692 SPECIFICATIONS: STANDARD 42 X 9 TABLE T SLOT CENTER DISTANCE 3 @ 2.5 CENTERS T-SLOT SIZE 0.625 EQUIPPED WITH: CHUCKS & COLLETS, VICE, TOOLING, KENNEDY TOOLBOX

(2) DUMP HOPPERS & (1) CHIP SHAVINGS COLLECTOR

WORK BENCH AND TOOLBOX COMBO WITH TOOLING APPROX 5 DRAWERS OF TOOLING & TOOLS AND EVERYTHING ON WORKBENCH INCLUDED

2000 LAGUNA FT.1 KNEE MILL W/POWERFEED SN: 77643 SPECIFICATIONS: TABLE: 9 X 42 X-AXIS: 28 Y-AXIS: 15 KNEE: 16 HEAD: 22

LARGE LOT OF LATHE TOOLING, CARBIDE INSERTS, CHUCKS, COLLETS

LINCOLN 284T 25HP ELECTRIC RECIPROCATING COMPRESSOR W/ AUX TANKS SPECIFICATIONS: 25HP 1760RPM 230/460V 62/31A

400 GALLON CARBON STEEL TANK SPECIFICATIONS: 96"T ALONG STRAIGHT SIDES 36" DIAMETER 9" INLET AND OUTLET PORTS ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

PALLET RACKING, SOME ASSEMBLED 1 SKID OF CROSS BEAMS UNASSEMBLED 1 SKID OF UPRIGHTS, UNASSEMBLED 1 SKID OF SHELF RACKING, UNASSEMBLED APPROX 10 UPRIGHTS AND 33 CROSS BEAMS IN ASSEMBLED RACKING NO CONTENTS OF ASSEMBLED PALLET RACKING INCLUDED

TIMESAVERS 243-1 43" SPEEDBELT WIDE BELT SANDER W/DUST COLLECTOR SN: 10733 SPECIFICATIONS: 43"W X 63" L BELT

TROY BILT MUSTANG 42 ZERO TURN LAWN MOWER 1 22HP KOHLER 7000 TROY BUILT MUSTANG 42 ZERO SERIES RIDING MOWER