Woodworking Equipment Commercial and Industrial

MOULDER TOOLING, USED ADJUSTABLE PLANING HEADS W/ REFERENCE. 2 PCES.

1992 REXCON RXW-10 10" TABLE SAW ON STAND, MOTOR DISASSEMBLED. S/N: 196307

DIAMOND COVE D7052, OGEE D7051 POD/RAIL CNC TOOLING. 2 PCES.

POD/RAIL CNC TOOLING, DIAMOND - CABINET DOOR, RAIL D7053, INSIDE D7050. 2 PCES

DELTA 10 CONTRACTOR SAW ON STAND. 115V. S/N: 93192062

USED 40MM CONVENTIONAL MOULDER MEASURING SET UP STAND.

SHAKER D7206 POD/RAIL CNC TOOLING, DIAMOND - RAISED INSERT PANEL , DUAL SIDES. 2 PCES

POD/RAIL CNC TOOLING, TOOL HOLDER - COLLECT HSKG3F. 2 PCES

POD/RAIL CNC TOOLING, DIAMOND - STEPPED 1/4 ROUND D7047, INSIDE PANEL D7582, OUTSIDE RADIUS D7239, OUTSIDE WATERFALL D7049. 4 PCES.

SHAPER TOOLING, USED GLADU INSERT - 1 1/4" BORE, 2 BEVEL, 1 BULLNOSE, 1 GROUND. 4 PCES.

MOULDER TOOLING USED TONGUE AND GROOVE INSERT SET - 40MM BORE. 2 PCES

VARIOUS RIP SAW BLADES - 80MM BORE, 12" 36 TEETH, 14" 36 TEETH, 16" 60 TEETH, 16" 72 TEETH. 4 PCES.

FANTACHI 180MM PLANING CUTTERHEAD, 1 1/2" BORE, MULTI-TOOTH PURPLE VERSION. FANTACHI 230MM PLANING CUTTERHEAD, 40MM BORE, MULTI-TOOTH. 2 PCES

MISC FLEX TRIM HEADS - VARIOUS TYPES/SIZES/GRITS. 11 PCES.

LENNOX LF-24-250A-5 NATURAL GAS HEATING UNIT. 250,000 BTUH. S/N: 5618D03012

CROSS TRANSFER POWER CONVEYOR. 11'L X 10'D. S/N N/A

1997 RITTER R275 DOOR CLAMPING EASEL. THE RITTER IS 8-FT WIDE X 4.5-FT HIGH. (ORIGINALLY 4-FT BUT, TOP SECTION ADDED TO MAKE IT 4.5-FT). COMES WITH (5) PNEUMATIC CLAMPS AND FOOT PEDAL. (5) AC-20 UNIVERSAL CLAMP CYLINDER SQUARING BARS ON BOTH ENDS. S/N: 3144

SINGLE SECTION POWER CONVEYOR. MOTOR HAS BEEN REMOVED. 18'L X 5'W.

WEINIG DOUBLE-BACKCARBIDE KNIFE ONLY 38MM X 150MM, W/ BACKING PLATE 38MM X 150MM. APPROX 6 PCE.

WEINIG 504 HEADS, 150 X 150 X 50 Z4 20D. 4 PCE

WEINIG 530 - 125 X 270 X 1 1/2" Z2 27D, ALUMINUM BOTTOM HEAD, 40MM BORE, 125 X 270 X 1 1/2" Z2 27D, ALUMINUM TOP HEAD, 40MM BORE, CENTROLOCK CUTTERHEAD, 140MM X 240MM X 40MM, Z4, ALUMINUM, 3 PCE.

HOFFMANN W4 STANDARD DOVETAIL KEYS - WITHOUT FLANGE - MEDIUM BROWN, SYNTHETIC POLYMER - 1 9/16 INCH SIZE, 40MM WIDTH, APPROX QUANTITY OF 100/BOX. 24 PCES.

LENNOX LF-24-250A-5 NATURAL GAS HEATING UNIT. 250,000 BTUH. S/N: 5618D03013

2017 LANDIS SANDERS S500 MODEL WH4 - 2017 LANDIS S-500 MACHINE FEATURES: POWERFUL DUST COLLECTION. EMERGENCY SHUT OFF SWITCH. 2 - 4" X 59" SAND BELTS. 208/230V, 9.4 AMPS, 2 HP, 60HZ, 1 PHASE.

2012 LANDIS SUPREME SANDERS S500 - 2012 LANDIS S-500 MACHINE FEATURES: POWERFUL DUST COLLECTION. EMERGENCY SHUT OFF SWITCH. 2 - 4" X 59" SAND BELTS. DIMENSIONS: 28" W (WITHOUT HOODS), 40"W (WITH HOODS) 30"D X 62"H POWER: 230 VOLT, SINGLE PHASE, 8.3AMP, 2HP S/N:1405

2018 LANDIS SANDERS S500 MODEL 11 - 2018 LANDIS S-500 IS A HIGH QUALITY SANDING MACHINE FOR INDUSTRIAL USE AND IS CAPABLE OF CONTINUOUS OPERATION. LANDIS S-500 MACHINE FEATURES: POWERFUL DUST COLLECTION. EMERGENCY SHUT OFF SWITCH. 2 - 4" X 59" SAND BELTS. DIMENSIONS: 28" W (WITHOUT HOODS), 40"W (WITH HOODS) 30"D X 62"H POWER: 208/230 VOLT, SINGLE PHASE, 9.4AMP, 2HP S/N 1821

2017 LANDIS SANDERS S600 1H3 SANDER S 6001H, 50'' (1270 MM) WIDE WITH HOODS, 2 BELTS. FOR YOUR LARGE SANDING PRODUCTION. HOODS OF 50'' (1270 MM) WIDE CAN ACCOMMODATE TWO TECHNICIANS WORKING ON THE SAME MACHINE AT THE SAME TIME. THE S 600 IS AVAILABLE WITH A POWERFUL DUST COLLECTION SYSTEM. THE CENTRAL VACUUM MODEL HAS A 6" (153 MM) PORT READY FOR DIRECT CONNECTION TO YOUR DUST COLLECTION SYSTEM. FEATURES (2) 4" X 59" (100 X 1500 MM) SANDING BELTS WITH EASY ACCESS, SANDING BELT SCRAPERS FOR MORE EFFICIENT DUST CONTROL, (1) SCOTCH BRITE WHEEL ON BAYONET (MODEL WITH HOODS ONLY), (1) HEEL BREASTER ON BAYONET (MODEL WITH HOODS ONLY), SUCTION DOORS TO CONTROL MAXIMUM DUST COLLECTION TO WORK AREA, 34 HP DIRECT DRIVE DUST COLLECTOR MOTOR, FRONT ACCESS DUST COLLECTION DRAWER. SPECIFICATIONS WIDTH WITHOUT HOODS: 36" (920 MM, WIDTH WITH HOODS: 50" (1270 MM, DEPTH: 32'' (812 MM), HEIGHT: 63" (1600 MM), NET WEIGHT: 590 LBS (268 KG), CRATED WEIGHT: 862 LB (392 KG), VOLTAGE : 230 V, 12.7 AMPS, 2 HP, 1 PHASE S/N: 1744

LANDIS SANDERS S500 MODEL 4 - THE LANDIS S-500 MACHINE FEATURES: POWERFUL DUST COLLECTION. EMERGENCY SHUT OFF SWITCH. 2 - 4" X 59" SAND BELTS. DIMENSIONS: 28" W (WITHOUT HOODS), 40"W (WITH HOODS) 30"D X 62"H POWER: 230 VOLT, SINGLE PHASE, 8.3AMP, 2HP S/N 1012

HOFFMANN PARTS - VARIOUS HOFFMAN PARTS - VOLT MOTOR, CHIP BREAKER, BRUSHES 450 W /115 VOLT MOTOR, PNEU. VALUE BO082040800 RELAY, BHM-56 CHIP DEFLECTOR, BRUSHES 1000W/115 VOLT, 1/2" CHIP BREAKER FOR NLF, 1/2" WIDE NOSE KNIFE. BLUE PLASTIC TRAYS NOT INCLUDED. APROX 13 PCES.

2006 JLT 79K-6-DC DOOR CLAMP

2001 SCM SI 350N SLIDING TABLE SAW. 600V 60HZ 3PH S/N: AB/144132

2000 SCM K208C EDGEBANDER. 380V 60HZ 3PH. S/N: AH/104395

2006 UNIQUE 250GT RAISED PANEL DOOR MACHINE S/N: 1266050250

WEINIG COMBINATION CUTTERHEAD, 125MM OUTSIDE DIAMETER, 2/2 POCKETS, OVERALL WIDTH OF 230MM, APPROX. USEABLE PROFILE WIDTH OF 200MM, 1 1/2 INCH BORE DIAMETER. 1 PCE.

MOULDER TOOLING USED INSERT HEADS - 1 REBATE ADJUSTABLE, 2 PLANER W/ REF GROUVER, 1 GROOVING CUTTER, 1 PLANING. 5 PCES

2007 WEINIG POWERMAT 1000 POWERMAT 1000/018 WITH VFD UPGRADE. INCREDIBLY FAST MACHINING OF SOLID WOOD OR OTHER MATERIALS SUCH AS PLASTIC OR MDF; PROFITABLE EVEN WITH SHORT RUNS. RATIONAL AND PROFITABLE. FAST, EASY SET-UP. HANDY, COMPACT TOOL. WITH SURFACE QUALITY SUPERIOR TO ANYTHING PREVIOUSLY POSSIBLE. (B-R-L-T-T-B), WORKING CAP. 9-1/16" X 4-3/4", POWERLOCK HEAD FROM # 2 HEAD THRU TO # 6,000 RPM ON POWERLOCK HEADS WITH VFD UPGRADE, WEINIG TOUCH-SCREEN "POWER COM" SOFTWARE SYSTEM, VARIABLE INVERTER DRIVE SPEED WITH 7.5 HP MOTOR WITH SPEEDS FROM 18-118 FPM, W/ 5FT X12FT CROSS TRANSFER CONVEYOR , WEINIG POWER INFEED. 600V/1/60. RIGGING REQUIRED. S/N: 109962

GENERAL 350 TABLE SAW - W/ EXCALIBUR OVERARM BLADE GUARD FOR ADDED SAFETY AND SUPERIOR DUST EXTRACTION. 575V, 60HZ, 3 PHASE, 3 HP. S/N: G9571

2010 BIESSE VIET S3 333TM WIDE BELT SANDER. SOLID MACHINE, WITH 53 WORKING WIDTH IN A 3 ROLLER CONFIGURATION. CAPABLE OF CALIBRATING AND FINE SANDING OF LARGE WORKPIECES IN A SINGLE PASS. FEATURES AND SPECS WORKING WIDTH:1350MM (53"), SANDING BELT DIMENSIONS: 2620MM X 1380MM, INFEED SPEED: 3-16M/MIN, INFEED MOTOR: 3HP, BELT MOTOR: 15HP, MONOLITHIC WELDED STEEL FRAME, THICK, ANTI-WEAR STEEL WORK BED, CONFIGURATION: 1ST -30KW, DRUM SIZE R240 WITH 70 SH, 2ND - 15KW, DRUM SIZE R240 WITH 40 SH, 3RD - 15KW, DRUM SIZE R320 WITH 30 SH. 460V 60HZ 3 PHASE. S/N: 5104098

2010 SCM STEFANI SOLUTION AHH-128-01 EDGEBANDER. CONVEYOR NOT INCLUDED. THIS EDGEBANDER IS CABLE OF EDGING UP TO 25MM THICK EDGING AND UP TO 60MM TALL PANEL. IT IS PREPROGRAMED FOR 0.5MM TAPE, 3MM PVC W/ CORNER ROUNDING, 3MM SOLID AND SOLID WOOD OVER 3MM. FEATURES: 2ND GLUE POT, ROLLING DUAL EDGE BANDING HOLDER, BUFFER WHEELS, EDGE BRIGHTENING, SPARE MOTORS, SPARE BLADES. RECENT UPGRADES: UPGRADED IN 2019, EDGE APPLICATION AREA, END TRIMMERS, TRACK. SIZE OF MACHINE: 80IN WIDE X 380IN LONG X 70IN HIGH. ADITIONAL INFO, IN CABIN LIGHTING FLORESCENT TUBES, FEED MOTOR 380V / 9A / 4KW VARIABLE SPEED, AUTOMATIC HEIGHT ADJUSTMENT, FRONT AND BACK PRE-MILL MOTORS ? 380V / 7.5A / 4KW *1 BACK UP DIMOND TEETH HEAD *1 BACK UP CARBIDE REPLACEMENT KNIFE HEAD SET AND KNIFES, CONNECTIONS SPOT FOR SHORT-WAVE HEATER (SHORT-WAVE HEATER NOT INCLUDED), QMS (QUICK MELT SYSTEM) FOR GLUE PELLETS, 2 ALUMINUM GLUE POTS WITH GLUE LEVEL SENSOR, DUAL ROLL VERTICAL FEED ROLLING TAPE HOLDER, PNEUMATIC GUILLOTINE WITH SHEAR REINFORCEMENT PIN NEEDLE ROLLER, PRESSURE ROLLERS, FRONT AND BACK END TRIMMERS AUTOMATIC SWITCHING 380V / 1.5A / 0.55KW, TOP AND BOTTOM FLUSH TRIMMERS 380V / 5A / 1.84KW, TOP AND BOTTOM CHAMFERING UNITS AUTOMATIC SWITCHING 380V / 1.8A / 0.51KW, 4 CORNER ROUNDING HEADS 380V / 1.1A / 0.35KW *TOP-FRONT/TOP-BACK/ BOTTOM-FRONT/BOTTOM-BACK, 3MM/2MM PVC PROFILE SCRAPER, TOP AND BOTTOM EDGE EXCESS GLUE SCRAPER, TOP AND BOTTOM BUFFERS 380V / 0.96A / 0.36KW, TOP AND BOTTOM EDGE BRIGHTENER 380V / 15A / 3KW HOT AIR BLOWERS, 2ND GLUE POT, ROLLING DUAL EDGE BANDING HOLDER, BUFFER WHEELS, EDGE BRIGHTENING, SPARE MOTORS, SPARE BLADES. IT IS PREPROGRAMED FOR 0.5MM TAPE, 3MM PVC W/ CORNER ROUNDING, 3MM SOLID AND SOLID WOOD OVER 3MM. RIGGING REQUIRED. S/N: AHH/123/01

2014 KENTWOOD RS-6 RANDOMIZER AUTOMATED SCRAPING FLOOR MACHINE. AUTOMATES THE PRODUCTION OF AUTHENTIC LOOKING ANTIQUE WOOD SCRAPED FLOORING. CREATES HUNDREDS OF PATTERNS THAT CAN BE SAVED AND USED OVER AGAIN AS NEEDED. CAN PROVIDE VARIOUS RADIAL, FLAT TYPE SCRAPES, SMOOTH AND CHATTER CUTTING AND JUMPING KNIVES TO CREATE DIVOTS WHERE THE KNIFE ENTERS AND EXITS THE SURFACE OF THE WOOD. EDGE SCRAPERS CAN PROVIDE CHAMFERED AND PILLOW TYPE EDGE WORK. THRU-FEED TYPE MACHINE CARDAN SHAFT VARIABLE FEED SPEEDS (2) MOTORIZED DENIBBING STATIONS 8 WIDE X 8 DIAMETER WIRE BRUSH TYPE HEAD (EACH), DUST HOOD (EACH) 2HP, 230/460V, 3PH MOTOR (EACH), (5) STEEL DRIVEN TABLE FEED ROLLERS, (1) STEEL IDLER TABLE FEED ROLL, (8) TILTABLE PROGRAMMABLE SERVO CONTROLLED AXIS SCRAPING TOOL HEADS, TOP PNEUMATIC RUBBER FEED WHEELS OVER EACH TABLE ROLLER. NON-REPEATING SCRAPING PATTERNS (1) MANUAL STATION FEED BEAM AND TOOL ACTUATORS ALL MOVE TOGETHER. PROGRAMMABLE KNIVES CAN OSCILLATE SIDE-TO-SIDE AND JUMP UP AND DOWN SIEMENS SIMATIC HM1 COLORED TOUCH SCREEN CONTROLLER WITH MEMORY SETTING. SOUND SAFETY ENCLOSURE WITH (3) LIFT UP ACCESS HOODS WITH LARGE VIEWING WINDOWS. DUST MANIFOLD FREE-STANDING OUTFEED ROLL FEEDER (1). DRIVEN TABLE ROLLER 612 WIDE (3) IDLER TABLE ROLLERS (1) TOP SPRING-LOADED HOLDDOWN GRAVITY ROLLER 12HP, 115/230V, 1PH MOTOR INCLINE SLIDE TABLE 8 LONG X 4 DEEP (2) SECTIONS OF GRAVITY ROLLER CONVEYOR 1412 WIDE X 7 LONG (EACH). 460 V - 3-PHASE - 60 HZ. RIGGING REQUIRED. S/N: 1402012

2006 HOLZHER 7123 FLAT TABLE CNC. FLAT TABLE CNC. QUALITY HOLZHER MACHINE, EXPAND YOUR SHOPS CAPABILITIES AND WITH A FLEXIBLE CAPABLE CNC. FEATURES AND SPECS - 1350MM X 3400MM TABLE, 7 PINS, 12 PCE TOOL CHANGER, W/ HOLZHER CONTROLS, SINGLE 2013 15HP CASTALY VACUUM PUMP. 400V 60HZ 3PH. NOTE: TOOL CHANGER NEEDS REPAIR. RIGGING REQUIRED. S/N: 5005174

2005 INTERMAC MASTER 43 MACHINING CENTER - STONE & GRANITE - INTERMAC "MASTER 43" MACHINING CENTER - STONE & GRANITE - FEATURES AND SPECS - 163 X 94 STONE & GLASS 3-AXIS CNC MACHINING CENTER WITH PC DRIVEN CNC CONTROLLER, WORK CENTRE WITH 3 CONTROLLED AXIS FOR MILLING, DRILLING, GRINDING, POLISHING, ENGRAVING AND CARVING MARBLE, STONE, AND GLASS PRODUCTS. TABLE SIZE: 4060MM X 2300MM, AXIS STROKE: 4160 X 2400 X 390 MM, SPINDLE: 12KW (18HP) HSD ELECTROSPINDLE, (2) 14 POSITION ROTARY TOOL RACKS, CONTROLLER: PC WITH AXIS DRIVE XP 615, IWNC INTERFACE, ETHERNET CARD, INTEGRATED MODEM, 15? COLOR MONITOR, CD-DRIVE, ICAM 3D SOFTWARE, INCLUDES ORIGINAL MANUALS & ONE TOOL AS SEEN IN PHOTOS. ESTIMATED DIMENSIONS: 21' X 11' X 10'H, 17,000 LBS. 400V/3PH. RIGGING REQUIRED. S/N: 55869

2005 THERMWOOD CS45 FLAT TABLE CNC ROUTER. TABLE SIZE: 5 X 10, TRAVEL SPEEDS: 1,500 IPM ON X,Y,Z, SPINDLE HP: 10.5, TOOL BAR POSITIONS: 5, 460V 60HZ 3PH, W/10HP BUSCH VACUUM PUMP. RIGGING REQUIRED. S/N: CS450421105

2017 FELDER G660 EDGEBANDER. OPERATING PANEL WITH LCD DISPLAY AND KEYPAD. PREMILLING UNIT WITH 2 DIAMOND TIPPED SPINDLES ROTATING IN OPPOSITE DIRECTIONS. MANUAL UNIT ADJUSTMENT FEATURES EDGE THICKNESS: 0.4 -6MM, WORKPLACE THICKNESS 8-60 MM, DEPTH OF CUT UP TO 2 MM, QUICK-SET-SYSTEM, CHANGEOVER GLUE BASIN WITH A TOOL FREE QUICKCHANGE SYSTEM, AUTOMATIC FEEDING WITH A FEED RATE OF 11M/MIN. 230V 60HZ 3PH. RIGGING REQUIRED. S/N: 25.06.023.17

2005 BURKLE TRUV THREE LAMP UV OVEN, 156"L X 64"W, 265/460V 60HZ. S/N: 10937-20

2006 OMNITECH PAL SELEXX CNC MACHINING CENTER FLAT-TABLE / NESTING. THE OMNITECH SYSTEMS SELEXX SERIES CNC ROUTER HAS BEEN DEVELOPED SPECIFICALLY WITH HIGHER PRODUCTION CNC ROUTER REQUIREMENTS, DEMANDING THE UTMOST PRECISION AND ACCURACY, ALL WITHIN A COST-EFFECTIVE INVESTMENT. THE SELEXX IS THE IDEAL CNC ROUTER FOR NESTING APPLICATIONS AS IT IS PACKED WITH STANDARD AND OPTIONAL FEATURES TO MAXIMIZE OUTPUT. FEATURES AND SPECS - TABLE SIZE1550 MM X 3100 MM (61 X 122), VACUUM ZONES PER TABLE 1 (ONE), AXIS STROKE: (X: 1835 MM (72.24) Y: 3180MM (125.2) Z: 250 MM (9.84)), POP-UP POSITIONING PINS 6, MAXIMUM FEED RATE: (X: 50 METERS/MIN (1,968/MIN), Y: 80 METERS/MIN (3,149/MIN) Z: 20 METERS/MIN (787/MIN)), MAXIMUM RAPID TRAVERSE: ALL-AXIS: 94 METERS/MIN (3,700/MIN), DUAL 6.4KW BECKER VACUUM PUMPS, FANUC CONTROLLED, HEAVY DUTY INDUSTRIAL GRADE WELDED STEEL CONSTRUCTION BASE. 240/480/575V 60HZ 3PH. RIGGING REQUIRED. S/N: FAAMCST95276

OMGA RN 900 14" RADIAL ARM SAW. 230V, 5HP MOTOR 35 1/2" CROSS CUT CAPACITY 44 1/2" RIP CAPACITY. THE PRECISION OF THESE RADIAL ARM SAWS IS IDENTIFIED BY THE FOLLOWING CHARACTERISTICS: SAW CARRIAGE SLIDES ON 8 BEARINGS, HAVING DUST SCRAPERS WHICH GUARANTEES COMPLETE CLEANLINESS OF BOTH THE INTERCHANGEABLE STEEL TRACKS AND THE BEARING. SELF-CENTRING LOCKING IN THE MAIN ANGLES POSITION OF THE ARM, THE MOTOR AND THE CARRIAGE WITH THE POSSIBILITY OF MANUAL LOCKING AT ALL INTERMEDIATE ANGLES. EASY AND EXTREMELY PRACTICAL UNLOCKING OF THE ARM ROTATION ON THE FRONT. SWIVELLING AND TILTING ON THE VERTICAL AND HORIZONTAL AXES. THESE MACHINES ARE ESPECIALLY SUITABLE FOR FURNITURE MANUFACTURERS, FRAME MAKERS, SAWMILLS AND CARPENTRY SHOPS. STANDARD OVERLOAD PROTECTION WITH THE NO-VOLT COIL, AUTOMATIC HEAD REVERSAL AND MOTOR BRAKE. MAX. DEPTH OF CUT 45 DEG 3-3/16", MOTOR POWER 5HP, SAW BORE 1", SAW DIAMETER 14", ARBOR SPEED (RPM) 3200, BEVEL POSITIVE STOPS 0-45, CROSSCUT CAPACITY 35-5/16", TABLE SIZE 32"X46", MAX. DADO CAPACITY 1-1/2", MAX. DEPTH OF CUT -90 4-1/2", MITER POSITIVE STOPS 45-0-45, OVERALL DIMENSIONS 54"X46", RIPPING CAPACITY 44-1/2", SHIPPING WEIGHT LBS. 412, CRATED DIMENSIONS 63"X20"X43", VOLTAGE 230/60. S/N: 16094

REVERSE AIR SYSTEMS RASDDT DOWNDRAFT TABLE (SELF CONTAINED WITH DUST COLLECTOR) - THE REVERSE AIR SYSTEMS DOWNDRAFT TABLE IS PROUDLY MADE IN CANADA. WE HAVE DESIGNED AND BUILT THIS PRODUCT WITH SIMPLICITY AND LONGEVITY IN MIND AND BRINGS PERFORMANCE LIKE NO OTHER. THIS IS THE PERFECT PRODUCT FOR BOTH SMALL AND MEDIUM JOBS AS IT PROVIDES 4000 CFM AND COLLECTS ALL DUST IN THE ADDED COLLECTION TRAY FOR EASY DISPOSAL. THE RASDDT COMES STANDARD WITH ESA APPROVED CONTROL BOX AND READY TO PLUG IN AND USE WITH EASY MOBILITY IN YOUR SHOP WITH ITS THE HEAVY-DUTY CASTERS. FEATURES - SIZE: 36 W X 72, 39 HEIGHT, 3HP MOTOR, 220 VOLTS, SINGLE PHASE, 60 DECIBELS SOUND LEVEL, CONTROL BOX, 10 EXTENSION CORD AND READY TO PLUG, 4000 CFM, COLLECTION BAGS, 4 HEAVY DUTY CASTER WHEELS, HEPA FILTER. BENEFITS - TOP SCREEN PROTECTED BY NON-MARKING RUBBER TABLETOP, PROUDLY MADE IN CANADA, ALL PARTS ARE UL, ESA AND CSA APPROVED. 220V 60HZ 3PH.

2013 MACMAZZA TOP PANEL BEAM SAW. EXCELLENT CONDITION, 380V/3PH/50HZ, HEAVY DUTY PANEL BEAM SAW, CUTTING LENGTH 4300MM(14FT), USEFUL CUTTING HEIGHT 108MM (4.25), MAIN BLADE MOTOR 30HP, MAIN BLADE RPM 3500-4500 GIRI/MIN, MAIN BLADE DIAMETER/HOLE 400MM, SCORING BLADE RPM 5600-6200 GIRI/MIN, SCORING BLADE DIAMETER/HOLE 160-320/55MM, SAW CARRIAGE FORWARD SPEED 3-70M/MIN, SAW CARRIAGE RETURN SPEED 40-70M/MIN, PUSHER SPEED 2-40M/MIN, PUSHER RETURN SPEED 40-80M/MIN, DUST EXTRACTION OUTLETS 4-7 @ 150MM, COMPRESSED AIR PRESSURE 6/7 BAR, COMPRESSED AIR CONSUMPTION 20-100L/MIN, DUST EXTRACTION 4000-11000M3H-2500N/M2. RIGGING REQUIRED. S/N: 793

2006 BIESSE SELCO EB 70L PANEL SAW. FEATURES AND SPECS - RACK AND PINION PUSHER CARRIAGE, POSITIONING OF PUSHER CARRIAGE ON MAGNETIC TAPE READER FOR CONSTANT COMMUNICATION WITH CONTROL DEVICE, PC BASED NUMERIC CONTROL OPTIMIZING MOVEMENTS AND CUTTING DEPTH TO OPTIMIZE MOVEMENT AND CUT QUALITY, EASY PROGRAMMING OF COMPLEX CUTTING PATTERNS, QUICK CHANGE: FOR FAST BLADE CHANGING, GROOVE CUTTING WITH MANUAL ADJUSTMENT FROM OUTSIDE OF THE MACHINE, DEVICE FOR CUTTING SOFT AND POST-FORMED PANELS, AIR TABLE AT FRONT OF MACHINE TO AID IN MATERIAL HANDLING. MAX. CUTTING LENGTH: 3200MM (126), MAX. PUSHER STROKE: 3200MM (126), MAX. BLADE PROJECTION: 80MM (3.15), MAX. GRIPPER OPENING: 80MM (3.15), AUTOMATIC SIDE SQUARING DEVICE, 17.5 HP MAIN SAW MOTOR, 3.6 HP SCORING SAW MOTOR. 600V. RIGGING REQUIRED. S/N: 71544