Online Only Auction 2Day Cooper Industries Industrial Processing Equipment Auction Day 2
Category: PACKAGING EQUIPMENT
Total Lots:
416
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
ACCU-RATE | SCR50EW |
1 1/2" ACCU-RATE SCREW FEEDER STAINLESS USED SERIAL NUMBER 6-10036-93 1 1/2" SCREW 1 3/4" TUBE 18" X 18" SCREW FEEDER INLET 26" L X 35" W X 15" H FLEXIBLE FEED HOPPER TO DELIVER CONSTANT BULK DENSITY MATERIAL TO THE SCREW PADDLE MESSAGERS TO FLEX THE HOPPER STAINLESS HOPPER WITH HINGED LID COVER 1/4 HP DC GEAR MOTOR 90 VDC 2.59 A 1825 RPM 34:1 GEAR RATIO 58 RPM OUTPUT
|
🔒 Subscribe | |
|
|
EMPIRE | PRO FINISH |
EMPIRE PRO FINISH CONTINUOUS BELT CONVEYOR SANDBLASTER WITH DUST COLLECTOR AND RECOVERY POT. BELT IS 24" WIDE X 120" LONG OVERALL SIZE OF BELT CONVEYOR SANDBLASTER UNIT IS 123" LONG X 73" WIDE X 118" WIDE WITH ARM ETENSION. ARM EXTENSION LENGTH IS 60" AND CAN BE REMOVED FOR SHIPPING. SANDBLAST CABINET IS 48" X 48" SAND RECOVERY AND PRESSURE POT IS 39" X 42" X 82" HIGH DUST COLLECTOR IS 39" WIDE X 42" DEEP X 102" HIGH WITH 10" DIAMETER DUST / AIR INLET WITH 4" HOPPER OUTLET AND 21" CLEARANE UNDER HOPPER.
|
🔒 Subscribe | |
|
|
ACCU-RATE |
1 1/2" DIAMETER ACCU-RATE SCREW FEEDER STAINLESS USED 1 1/2" DIAM SCREW 2" I.D. SCREW TUBE (2) 1/4 HP 90 V DC PACIFIC SCIENTIFIC MOTORS; CLASS 1 AND 2 1800 RPM STAINLESS USED 18" X 18" INLET S/N: 6-8623-92
|
🔒 Subscribe | ||
|
|
GOULDS | 3196 |
15 HP GOULDS PUMP MODEL 3196 150 GPM AT 140 FT. HEAD IMPELLER DIAM. 13 SIZE 1.5X3-13 250 PSI @ 100F 1800 RPM DUCTILE IRON WITH 316 STAINLESS STEEL IMPELLER. JOHN CRANE SEAL 15 HP MARATHON ELECTRIC MOTOR FRAME 254T 230/460 V 37.6/18.8 A 1775 RPM. S/N: 726E167
|
🔒 Subscribe | |
|
|
ACCU-RATE SCREW FEEDER |
2" DIAMETER ACCU-RATE SCREW FEEDER CODE 560-351600 STAINLESS STEEL, USED CODE 560-351600 SERIAL # 35336-01A-602 110 VAC 50/60 HZ 5 AMP VARIABLE SPEED CONTROLLER TESTED AND FUNCTIONS (VIDEO AVAILABLE) 30" OVERALL HEIGHT 14" INLET HOPPER HEIGHT 16" X 16" HOPPER INLET USED TEST RUN VIDEO ON FILE
|
🔒 Subscribe | ||
|
|
LINK BELT |
6" X 30' LONG LINK BELT CARBON STEEL SCREW CONVEYOR WITH U-TROUGH DESIGN AND FLAT COVERS. 0.75 HP EURO DRIVE MOTOR AND GEAR REDUCER. 230/460 VOLT. SCREWS APPEAR TO BE IN EXECLLENT CONDITION.
|
🔒 Subscribe | ||
|
|
1998 | INDUSTRIAL MAGNETICS INC. | IMH1010R3EZA487 |
10" INDUSTRIAL MAGNETICS INC. FLOW THROUGH MAGNET STAINLESS PART NO. IMH1010R3EZA487 ID NO. CO93636 BUILT 09/98 10" INLET W/ 12 1/4" FLANGE 6" OUTLET 19" INLET TO OUTLET
|
🔒 Subscribe |
|
|
AEROVENT | 16-SWCBF-3091-7.5 |
7.5 HP TCF AEROVENT BLOWER FIBERGLASS UNUSED FAN MODEL: 16-SWCBF-3091-7.5 TYPE: SWCBF 7.5 HP CORROSION PROTECTED BALDOR ELECTRIC MOTOR 460 V, 8.9 A; 3500 RPM; 3 PH; 60 HZ FIBERFLASS WHEEL AND BODY 17" X 11' OUTLET 19' DIAM INLET UNUSED IDEAL FOR CORROSIVE ENVIRONMENTS AND SCRUBBER APPLICATIONS. SERIAL NUMBER: 99333190-1-1
|
🔒 Subscribe | |
|
|
ARMSTRONG PUMPS INC. | 3 X 2.5 X 10 4030 |
7.5 HP ARMSTRONG PUMPS INC. CENTRIFUGAL PUMP MODEL 3 X 2.5 X 10 4030. CONSTRUCTION BF-STD; S/N C490745. PUMP CAPACITY 190 US GPM, 70 FT. WITH NIDEN 7.5 HP 1765 RPM 208-230/460V, 3 PH ELECTRIC MOTOR DP.5 HP 1760 RPM 230/460V 3 PH ELECTRIC MOTOR, DP. MOUNTED ON COMMON BASE.
|
🔒 Subscribe | |
|
|
APM | VCBS 1/8-6-X5.EC |
APM SEALER MODEL VCBS 1/8-6-X5.EC 1/3 HP DAYTON ELECTRIC MOTOR 115/208-230 V 4.4/2.2 A 1 PH 60 HZ 60 WIDE X 54" LONG BELT BELT IS 34" H FROM GROUND (ADJUSTABLE) USABLE WITH 4"-26" TALL BAGS S/N: 2826
|
🔒 Subscribe | |
|
|
19 IN ROUND MAGNETIC GRATE DROP IN DESIGN STAINLESS STEEL 19 1/4" X 19 3/4"
|
🔒 Subscribe | |||
|
|
2018 | NEW YORK BLOWER COMPANY | 29 AH |
2018 NEW YORK BLOWER COMPANY FAN SERIES 20 MODEL 29 AH, GENERAL INDUSTRIAL FAN, USED NEW YORK BLOWER COMPANY FAN FAN DESCRIPTION: SERIES 20 GENERAL INDUSTRIAL ARR-10 WHEEL SIZE & TYPE: 29 AH BUILT 2018 7600 CFM 5" WG SP 1303 RPM UB DISC CW ROT 16 1/2" DIAM INLET W/ TRANSITION TO 19 1/2" 16" X 13 1/2" OUTLET CARBON STEEL CONSTRUCTION USED 15 HP BALDOR ELECTRIC MOTOR 230/460 V 36/2/18.1 AMP
|
🔒 Subscribe |
|
|
SIEMENS | RGZESD 405T |
100 HP SIEMENS MOTOR TYPE RGZESD 405T ORDER NO. 2118016001-2 1760 RPM 460 V 113 AMPS UNIT HAS BEEN REBUILT AND NOT USED SINCE BEING REUILT. DIMENSIONS & WEIGHT: 38" L X 27" W X 24" H 1200 LBS
|
🔒 Subscribe | |
|
|
INDUSTRIAL MAGNETICS INC. |
(ONE), 6" INDUSTRIAL MAGNETICS INC. MAGNETIC SEPARATOR, PNEUMATIC LINE HOUSING. ENTRY/EXIT 41 L. CO #238328, PT. #HH06DRO5E2A130.NE MAGNET..
|
🔒 Subscribe | ||
|
|
VELAN | A |
LOT OF TWO, 3'' VELAN SPLIT BODY BALL VALVES STAINLESS UNUSED 3'' DIAM INLET/OUTLET 7 1/2" O.D. FLANGES 7 7/8" INLET TO OUTLET CWP: 275 PSIG MAX TEMP: 450 F BALL: 316 SEAT: MPTFE BODY: CF8M STEM: 316 FIG: 01413-SSEA-W330 MODEL: A
|
🔒 Subscribe | |
|
|
AMETEK | DR808D89MXA |
5 HP AMETEK REGEN BLOWER MODEL DR808D89MXA PART NO. 081645 5/2.8 HP 208-230/415-460 V 3470/2900 RPM 50 HZ 8-7.6/4-3.8 A 60 HZ 12.2-11.1/6.1-5.6 A 2 3/4 INCH INLET/OUTLET UNUSED
|
🔒 Subscribe | |
|
|
WEG | 00718EP3ERS213T |
7.5 HP WEG ELECTRIC MOTOR UNUSED FRAME 213/5T MODEL 00718EP3ERS213T 7.5 HP (5.5 KW) 208-230/460 V 21.3-19.3/9.64 A 1760 RPM FRAME 213/215T
|
🔒 Subscribe | |
|
|
FUJI ELECTRIC | VFC603A-7W |
4.5 HP FUJI ELECTRIC RING COMPRESSOR REGENERATIVE BLOWER MODEL VFC603A-7W 4.5 HP 230/460 V 11/5.5 A 3 PHASE 50/60 HZ 118" H2O 206 CFM SERIAL # 80957270Y140 2" INLET/OUTLET CARBON STEEL UNUSED.
|
🔒 Subscribe | |
|
|
VELAN | B |
6'' VELAN MANUAL GATE VALVE STAINLESS BODY: CF8M WEDGE: CF8M STEM: 316 SEAT: INTEGRAL 275 PSIG 100F FIG: F14-0064C-13SX-W399 MODEL: B TEFLON GASKET AND PACKING MAX TEMP: 450 F 6'' I.D. INLET/OUTLET 10'' INLET TO OUTLET 11'' O.D. FLANGES
|
🔒 Subscribe | |
|
|
4026AAS |
20 HP MOTOR, 230/460, 1755 RPM 3 PHASE 256T FRAME, TEFC 4026AAS. PART NO 5VN 3 1/4 LONG SHAFT 1 5/8" DIAM SHAFT WEIGHTS AND DIMENSIONS: 26" L X 18" W X 15" H 300 LBS
|
🔒 Subscribe | ||
|
|
FALK | 4E-06A |
FALK GEAR REDUCER 4E-06A; 11.12 RATIO, RIGGING FEE: $50 - FALK GEAR REDUCER 4E2-06A, 11.12 RATIO. 1750 PRM INPUT; 157 RPM OUTPUT15, SHAFTS ARE 2-1/2 INCH/1-1/2 INCH UNIT IS FACTORY REMANUFACTURED AND NOT USED SINCE REMANUFACTURING.., RIGGING FEE: $50
|
🔒 Subscribe | |
|
|
2007 | MARATHON ELECTRIC | EVN 256TTFCA4026 |
20 HP MARATHON ELECTRIC MOTOR MODEL: EVN 256TTFCA4026 60 HZ 208-230/460 VOLTS 52-47/23.5 AMPS 1770 RPM 50 HZ 190/380 VOLTS 15HP 43/21.5 AMPS 1475 RPM MANUFACTURED 12/07
|
🔒 Subscribe |
|
|
WEG | W22 |
30 HP WEG W22 INVERTER DUTY MOTOR MODEL FRAME 284/6TS 460 VOLT 33.8 AMP 3 PH 60 HZ 3535 RPM DIMENSIONS & WEIGHT 400 LBS
|
🔒 Subscribe | |
|
|
MEYER | VFII/SF-18-6 |
MEYER SS VIBRATORY FEED CONVEYOR AND HOPPER, MODEL VFII/SF-18-6, SN2132. .51 HP MOTOR, 230/460/3/60. WITH NEW LIGHTNING AGITATOR MOUNT AND MOTOR; HOPPER 23" X 23" X 23". 80" TALL INFED; VIBRATOR CONVEYO 72" LONG X 16" WIDE X 6" DEEP. 51" TLAL DISCHARGE X 9" DIAMETER OUTLET.
|
🔒 Subscribe | |
|
|
2009 | KSB | MTC V 50/6D-041-10 63 |
2009 KSB PUMP VERTICAL MULTI-STAGE CENTRIFUGAL PUMP, UNUSED MODEL: MTC V 50/6D-041-10 63 SN: 9971531886/000100 CAPACITY: 36 M3/H HEAD: 309.95 METER N: 3565 T/MIN YEAR: 2009 2" OUTLET WITH 6 1/2" FLANGE NO MOTOR UNUSED; BUILT 2009
|
🔒 Subscribe |
|
|
GARDNER DENVER HOFFMAN NASH LAMSON | TURBOTRON |
GARDNER DENVER HOFFMAN NASH LAMSON BLOWER MODEL TURBOTRON MODEL TURBOTRON SERIAL POI5I28X SALES ORDER 243032I 1-7/8" SHAFT 8 3/4" INLET/OUTLET FLANGE 4" INLET/OUTLET APPEARS UNUSED
|
🔒 Subscribe | |
|
|
UNIVERSAL INDUSTRIES INC. | SC SERIES |
UNUSED UNIVERSAL INDUSTRIES STAINLESS STEEL BUCKET ELEVATOR SC SERIES. UNIVERSAL INDUSTRIES INC. VERTICAL STAINLESS STEEL FOOD GRADE BUCKET ELEVATOR MODEL SC. SELF-CLEANING FOOD GRADE DESIGN. UNIVERSAL SALES ORDER 37272 CURRENTLY HAS A 5'-3" DISCHARGE HEIGHT 6" X 4" PLASTIC BUCKETS MOUNTED ON WHITE FOOD GRADE BELT. WHITE LAGGED BOOT PULLEY. COMPLETE WITH STAINLESS STEEL DUMP HOPPER DUMP HOPPER HAS A BAG BREAKER CUTTER BAR AND INLET SCREEN. DRIVE IS 3/4 HP, 208-230/460V, 3 PHASE.
|
🔒 Subscribe | |
|
|
HINKLE | 97101 |
HINKLE LOCTITE MMD PUMP SYSTEM 1000 MODEL 97101 COMPLETE WITH ELECTRIC HEATING ELEMENT, PUMP, AND RESERVOIR. UNUSED.
|
🔒 Subscribe | |
|
|
2009 | RAPAT | BULK-FLO |
2009 RAPAT BULK-FLO CHAIN CONVEYOR 6" X 12" 53'-8" DISCHARGE HEIGHT. 21'-3" CENTER OF FEED TO HORIZONTAL CENTER OF DISCHARGE. 25'-11" OVERALL HORIZONTAL LENGTH. TRAMCO DRAWING # 08-2188-002. CONVEYOR SPEED: 50 FEET PER MINUTE CAPACITY: DESIGNED FOR 15 TON PER HOUR AT 750 CF/HR AT 40 POUND PER CUBIC FOOT DENSITY MATERIAL. CONVEYOR SIZE IS 8" X 12". 5 HP DRIVE. SPEED IS 50 FPM. ORIGINAL MATERIAL CONVEYED: POULTRY MEAL. DRIVE WEIGHT IS 624 LBS. CONVEYOR WEIGHT IS 8615 LBS. DRAWING ON FILE NOTE: SOME PARTS MAY BE MISSING. S/N: BF-1465
|
🔒 Subscribe |
|
|
SCHENCK ACCURATE |
3" DIAMETER X 32" LONG SCHENCK ACCURATE SCREW FEEDER, STAINLESS STEEL
|
🔒 Subscribe | ||
|
|
AMERICAN FAN COMPANY | AF-9 |
1 HP AMERICAN FAN COMPANY MODEL AF-9 CAST ALUMINUM BLOWER SERIAL #: 986788-2 4 1/2" DIAMETER INLET W/ 10" FLANGE 4" O.D. OUTLET CAST ALUMINUM BODY AND WHEEL MOTOR: EXPLOSION PROOF, 1 HP 208-230/460 VOLTS 3.7-3.6/1.8 AMPS 3450 RPM MOTOR FRAME 56C
|
🔒 Subscribe | |
|
|
BRAY | 416SS |
LOT OF 3 BRAY BUTTERFLY VALVES 2) 6" & 1) 4" SS UNUSED 6" & 4" DIAMEYER 416SS STEM 316SS DISC A126 BODY 250 PSI WP EPDM SEAT
|
🔒 Subscribe | |
|
|
GARDNER DENVER | HYFMJBA |
75 HP GARDNER DENVER HELIFLOW MODEL HYFMJBA CATALOG # HF616 VERY LOW HOURS OF USE MODEL HYFMJBA SERIAL # S475031 CATALOG # HF616 MAX RPM 3300 75 HP 365TS FRAME MOTOR 3550 RPM 230/460 V 166/83 A 3 PH 60 HZ STODDARD SILENCERS INLET FILTER MODEL F64-8(46B128) REPLACEMENT ELEMENTS: F8-111 8" I.D. OUTLET W/ 13 1/2" FLANGE
|
🔒 Subscribe | |
|
|
GARDNER DENVER | GABHBPA |
5 HP GARDNER DENVER BLOWER PACKAGE MODEL GABHBPA CATALOG NO. 3HP MODEL GABHBPA SERIAL # S150743 CATALOG NO. 3HP LEESON 5 HP MOTOR 208-230/460 3510 RPM 3 PH 60 HZ CONTROL CABINET WITH LEESON SPEEDMASTER ADJUSTABLE SPEED MOTOR CONTROL
|
🔒 Subscribe | |
|
|
DESM SIER-BATH | LSIM |
DESM SIER-BATH GEAR PUMP, ROTARY SCREW PUMP, UNUSED. SIZE: LSIM DOUBLE SUCTION GEAR PUMP RATED FOR 800 GPM AT DISHARGE PRESSURE OF 48 PSI WITH USE OF A 1150 RPM 100 HP MOTOR( NOT INCLUDED) ITEM IS UNUSED ANDD STILL IN ORIGINAL SHIPPING CRATE.
|
🔒 Subscribe | |
|
|
2009 | RAPAT | G |
2009 RAPAT MODEL G DRAG CHAIN CONVEYOR 15" WIDE X 16" HIGH. CONVEYOR IS 22'-0" CENTER OF FEED TO CENTER OF DISCHARGE. TRAMCO DRAWING # 08-2188-003. DRIVE IS 3 HP 1800 RPM, 3-60-230-460 VOLT TEFC PREMIUM EFFICIENCY MOTOR WITH 182T FRAME. CONVEYOR SPEED: 94.05 FEET PER MINUTE. CAPACITY: DESIGNED FOR 100 TON PER HOUR AT 40 POUND PER CUBIC FOOT DENSITY MATERIAL. ORIGINAL MATERIAL CONVEYED: POULTRY MEAL. DRIVE WEIGHT IS 440 LBS. CONVEYOR WEIGHT IS 3060 LBS. DRAWING ON FILE. NOTE: SOME PARTS MAY BE MISSING. S/N: G-4686
|
🔒 Subscribe |
|
|
CHAMPION | 182 |
UNUSED CHAMPION FAN SIZE 182; ARRANGMENT 10; CLASS II II; CWTH ROTATION, BACKWARD INCLINED NON OVERLOADING WHEEL; SN 791C01-1. ALL STAINLESS STEEL AIR CONTACT PARTS CONSTRUCTION. WEATHERPROOF COVER OVER 5HP MOTOR AND V-BELT DRIVE.
|
🔒 Subscribe | |
|
|
MARTIN |
18" DIA. STAINLESS BIN ACTIVATOR LIVE BOTTOM W/ 8 CUBIC FOOT CAPACITY. BIN IS 18 INCH DIAMETER BY 42 STRAIGHT SIDE. ABOVE THAT SECTION IS A 38 INCH LENGTH OF TRANSITION FROM 18 INCHES DOWN TO 10 INCH FLANGED INLET. BIN HAS THREE MOUNTING LUGS. HAS 20" X 20" INSPECTION DOOR WITH 8" X 9" CLEAR VIEW WINDOW. ALSO INCLUDED IS AN 18 INCH DIAMETER STAINLESS STEEL VIBRATING BIN ACTIVATOR ON THE BOTTOM WITH A MARTIN VIBRATOR AND SAFETY INTERLOCK. MARTIN VIBRATOR IS 3600 RPM, 230/460 VOLT. THE PRODUCT DISCHARGE IS A 6" SLEEVE WITH FORMED LIP CONNECTION. NEOPRENE FLEX SLEEVE ON BIN ACTIVATOR HAS A 2 INCH TEAR AND NEEDS TO BE REPLACED. OVERALL HEIGHT IS 96".
|
🔒 Subscribe | ||
|
|
WYSSMONT | DRCB-104 |
4" WIDE X 12" LONG WYSSMONT DOUBLE ROTOCAGE LUMPBREAKER MODEL DRCB-104; ALL STAINLESS STEEL MODEL DRCB-104 12 1/2" X 4" INLET 6 1/2" X 15" FLANGE 12" INLET TO OUTLET FLANGE TO FLANGE FACE TO FACE DIMENSION (2) 1/2 HP OHIO P.M. MOTOR 90 V 5.2 A 1800 RPM
|
🔒 Subscribe | |
|
|
METO SYSTEMS | CONE BIN BOTTOM ATTACHMENT |
METO LIFT STAINLESS STEEL CONE BIN BOTTOM ATTACHMENT. FOOD GRADE CONSTRUCTION. UNUSED UNLOADING HOPPER 30" DIAMETER X 30" OVERALL HEIGHT. MANUFACTURED BY : METO SYSTEMS, FRANKLIN LAKES, NJ.
|
🔒 Subscribe | |
|
|
LUMP CATCHER WITH CLEANOUT PORT 4.5" OD INLET 6" ID OUTLET 9" OD OUTLET FLANGE STAINLESS CONSTRUCTION
|
🔒 Subscribe | |||
|
|
VRF2D2G1A |
40 CUBIC FEET STAINLESS DRY MATERIAL HOPPER, UNUSED 90" OVERALL HEIGHT; 7.5" X 22" INLET; 6" DIAMETER OUTLET 18" W X 24" T SIDE OPENING FOR CLEAN OUT OR INSPECTION. 2 BINDICATOR LEVEL PROBES MODEL: VRF2D2G1A 9-36 VDC 90" OVERALL HEIGHT; 7.5" X 22" INLET; 6" DIAMETER OUTLET 18" W X 24" T SIDE OPENING FOR CLEAN OUT OR INSPECTION. 2 BINDICATOR LEVEL PROBES MODEL: VRF2D2G1A 9-36 VDC
|
🔒 Subscribe | ||
|
|
2017 | NEW YORK BLOWER | 2612 |
2017 NEW YORK BLOWER MODEL 2612 STEEL PRESSURE BLOWER, ARR-8 BUILT IN 2017 3305 CFM 53.6" WG SP 50 HP BALDOR ELECTRIC MOTOR 3530 RPM 5400 MAX RPM 460 V 55 A 3 PH 60 HZ 326TS FRAME BAU DISCHARGE CW ROTATION (BLOWER HOUSING CAN BE ROTATED TO OTHER DISCHARGE LOCATIONS SUCH AS CWUB) 12" I.D. INLET / OUTLET MANUAL DISCHARGE DAMPER
|
🔒 Subscribe |
|
|
JOHN E SMITH AND SONS | TWIN SHAFT PADDLE BLENDER |
10 CUBIC FOOT, 10 HP JOHN E SMITH AND SONS, BUFFALO, NY TWIN SHAFT PADDLE BLENDER STAINLESS USED 10 CF CAPACITY 10 HP CONTINENTAL ELECTRIC MOTOR 220/440 V 26.4/13.2 A 1160 RPM 3 PH 60 HZ SERIAL # R50926.6 44" L X 31" W X 24" H VOLUME TIP OUT THE TOP TYPE OF DISCHARGE IS STANDARD
|
🔒 Subscribe | |
|
|
NEWELL MACHINERY COMPANY |
[UNUSED] NEWELL MACHINERY COMPANY SCREW CONVEYOR. 9" DIAMETER X 8' LONG U-TROUGH SCREW CONVEYOR. HINGED DROP BOTTOM TROUGH. 10 3/8" X 10 3/8" SQUARE INLET/DISCHARGE, 1 HP, 230/460, 3 PH, TEFC. QUICK RELEASE LATCHES IN COVER. CARBON STEEL CONSTRUCTION.
|
🔒 Subscribe | ||
|
|
GARDNER DENVER | GAHMBLA 8ML |
50 HP EXCELSIOR SUTORBILT GARDNER DENVER SEMCO SYSTEM BLOWER PACKAGE MODEL # BUS 047 GAHMBLA 8ML U23167 1575 BLOWER MODEL: GARDNER DENVER GAHMBLA 8ML MODEL # BUS 047 SERIAL # 239969 16 1/2" DIAMETER BLOWER PULLEY 5 1/2" DIAMETER OUTLET UNIVERSAL SILENCER 5 1/2" DIAM OUTLET 50 HP BALDOR MOTOR 230/460 V 118/59 A 1770 RPM 8 1/2" DIAMETER MOTOR PULLEY
|
🔒 Subscribe | |
|
|
SHIPCO | 110D 152 LPC |
SHIPCO PUMP TYPE 110D; MODEL 152 LPC; 1/2 HP, 115/208-230 1 PH 60 HZ; NEW SURPLUS. RATED AT 22.5 GPM AT 20 PSIG. SERIAL # 78348 DIMENSIONS AND WEIGHT: 43" L X 37" W X 29" H 214 LBS
|
🔒 Subscribe | |
|
|
NATIONAL BULK EQUIPMENT | POWDER BLENDING HOPPER 48 |
26 CUBIC FOOT NBE NATIONAL BULK EQUIPMENT POWDER BLENDING HOPPER 48, 26 CUBIC FOOT NBE NATIONAL BULK EQUIPMENT POWDER BLENDING HOPPER MIXER48" DIAMETER STAINLESS, USED COMPLETE WITH VERTICAL RIBBON INTERNAL MIXER PROJ # 7689 WEIGHT LIMIT 750 LB 7.5 HP SIEMENS MILL AND CHEMICAL DUTY MOTOR PE 21 PLUS 460 VOLT ONLY. 9 AMP, 3 PH 60 HZ 1750 RPM 8" DIAMETER BOTTOM OUTLET TUBE (4" X 6" OUTLET INSIDE HOPPER) 48" TOP HOPPER DIAMETER 22" BOTTOM HOPPER DIAMETER 18" TALL STRAIGHT SIDE 22" TALL CONE SECTION 40" TALL HOPPER OVERALL 28 1/2" GROUND TO BOTTOM OF OUTLET 87" OVERALL HEIGHT, 5' X 4' FOOTPRINT STAINLESS STEEL MATERIAL CONTACT PARTS. DISCHARGE OUT THE BOTTOM. DESIGNED TO BE PORTABLE AND INCLUDES FORK TRUCK SLOTS FOR PORTABILITY. ELECTRICAL CORD AND PLUG INCLUDED. FORMALLY USED AT DUPONT PLASTICS, WASHINGTON, WV
|
🔒 Subscribe | |
|
|
PRATER | CNHJS4110Y |
12" DIAM PRATER ROTARY AIRLOCK CARBON STEEL FOR PARTS/REPAIR, 12" DIAM INLET/OUTLET WITH 16 3/4" FLANGE 20" INLET TO OUTLET CARBON STEEL BODY AND FIXED TIP ROTOR GEAR REDUCER MODEL CNHJS4110Y 59:1 RATIO 1 HP US MOTORS 208-230/460 V 3.6/1.8 A 3 PH 60 HZ
|
🔒 Subscribe | |
|
|
WESTINGHOUSE |
25 HP WESTINGHOUSE ELECTRIC MOTOR 885 RPM, FRAME 326T 25 HP 230/460 V 65/32.5 A 3 PH 60 HZ FRAME 326T 885 RPM UL CERTIFIED FOR HAZARDOUS LOCATIONS CLASS I GROUP D CLASS II GROUP F&G
|
🔒 Subscribe |
ACCU-RATE SCR50EW
PACKAGING EQUIPMENT
1 1/2" ACCU-RATE SCREW FEEDER STAINLESS USED SERIAL NUMBER 6-10036-93 1 1/2" SCREW 1 3/4" TUBE 18" X...
Hammer Price:
🔒
EMPIRE PRO FINISH
SURFACE FINISHING EQUIPMENT
EMPIRE PRO FINISH CONTINUOUS BELT CONVEYOR SANDBLASTER WITH DUST COLLECTOR AND RECOVERY POT. BELT I...
Hammer Price:
🔒
ACCU-RATE
MISC
1 1/2" DIAMETER ACCU-RATE SCREW FEEDER STAINLESS USED 1 1/2" DIAM SCREW 2" I.D. SCREW TUBE (2) 1/4 H...
Hammer Price:
🔒
GOULDS 3196
TANKS, PUMPS & STORAGE EQUIPMENT
15 HP GOULDS PUMP MODEL 3196 150 GPM AT 140 FT. HEAD IMPELLER DIAM. 13 SIZE 1.5X3-13 250 PSI @ 100F ...
Hammer Price:
🔒
ACCU-RATE SCREW FEEDER
PHARMACEUTICAL MANUFACTURING EQUIPMENT
2" DIAMETER ACCU-RATE SCREW FEEDER CODE 560-351600 STAINLESS STEEL, USED CODE 560-351600 SERIAL # 35...
Hammer Price:
🔒
LINK BELT
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
6" X 30' LONG LINK BELT CARBON STEEL SCREW CONVEYOR WITH U-TROUGH DESIGN AND FLAT COVERS. 0.75 HP EU...
Hammer Price:
🔒
1998 INDUSTRIAL MAGNETICS INC. IMH1010R3EZA487
MISC
10" INDUSTRIAL MAGNETICS INC. FLOW THROUGH MAGNET STAINLESS PART NO. IMH1010R3EZA487 ID NO. CO93636 ...
Hammer Price:
🔒
AEROVENT 16-SWCBF-3091-7.5
DUST COLLECTION EQUIPMENT
7.5 HP TCF AEROVENT BLOWER FIBERGLASS UNUSED FAN MODEL: 16-SWCBF-3091-7.5 TYPE: SWCBF 7.5 HP CORROSI...
Hammer Price:
🔒
ARMSTRONG PUMPS INC. 3 X 2.5 X 10 4030
TANKS, PUMPS & STORAGE EQUIPMENT
7.5 HP ARMSTRONG PUMPS INC. CENTRIFUGAL PUMP MODEL 3 X 2.5 X 10 4030. CONSTRUCTION BF-STD; S/N C4907...
Hammer Price:
🔒
APM VCBS 1/8-6-X5.EC
PACKAGING EQUIPMENT
APM SEALER MODEL VCBS 1/8-6-X5.EC 1/3 HP DAYTON ELECTRIC MOTOR 115/208-230 V 4.4/2.2 A 1 PH 60 HZ 60...
Hammer Price:
🔒
2018 NEW YORK BLOWER COMPANY 29 AH
DUST COLLECTION EQUIPMENT
2018 NEW YORK BLOWER COMPANY FAN SERIES 20 MODEL 29 AH, GENERAL INDUSTRIAL FAN, USED NEW YORK BLOWER...
Hammer Price:
🔒
SIEMENS RGZESD 405T
ELECTRICAL AND POWER GENERATION EQUIPMENT
100 HP SIEMENS MOTOR TYPE RGZESD 405T ORDER NO. 2118016001-2 1760 RPM 460 V 113 AMPS UNIT HAS BEEN R...
Hammer Price:
🔒
INDUSTRIAL MAGNETICS INC.
MISC
(ONE), 6" INDUSTRIAL MAGNETICS INC. MAGNETIC SEPARATOR, PNEUMATIC LINE HOUSING. ENTRY/EXIT 41 L. CO ...
Hammer Price:
🔒
VELAN A
TANKS, PUMPS & STORAGE EQUIPMENT
LOT OF TWO, 3'' VELAN SPLIT BODY BALL VALVES STAINLESS UNUSED 3'' DIAM INLET/OUTLET 7 1/2" O.D. FLAN...
Hammer Price:
🔒
AMETEK DR808D89MXA
MISC
5 HP AMETEK REGEN BLOWER MODEL DR808D89MXA PART NO. 081645 5/2.8 HP 208-230/415-460 V 3470/2900 RPM ...
Hammer Price:
🔒
WEG 00718EP3ERS213T
ELECTRICAL AND POWER GENERATION EQUIPMENT
7.5 HP WEG ELECTRIC MOTOR UNUSED FRAME 213/5T MODEL 00718EP3ERS213T 7.5 HP (5.5 KW) 208-230/460 V 21...
Hammer Price:
🔒
FUJI ELECTRIC VFC603A-7W
AIR COMPRESSORS
4.5 HP FUJI ELECTRIC RING COMPRESSOR REGENERATIVE BLOWER MODEL VFC603A-7W 4.5 HP 230/460 V 11/5.5 A ...
Hammer Price:
🔒
VELAN B
TANKS, PUMPS & STORAGE EQUIPMENT
6'' VELAN MANUAL GATE VALVE STAINLESS BODY: CF8M WEDGE: CF8M STEM: 316 SEAT: INTEGRAL 275 PSIG 100F ...
Hammer Price:
🔒
4026AAS
ELECTRICAL AND POWER GENERATION EQUIPMENT
20 HP MOTOR, 230/460, 1755 RPM 3 PHASE 256T FRAME, TEFC 4026AAS. PART NO 5VN 3 1/4 LONG SHAFT 1 5/8"...
Hammer Price:
🔒
FALK 4E-06A
MISC
FALK GEAR REDUCER 4E-06A; 11.12 RATIO, RIGGING FEE: $50 - FALK GEAR REDUCER 4E2-06A, 11.12 RATIO. 17...
Hammer Price:
🔒
2007 MARATHON ELECTRIC EVN 256TTFCA4026
ELECTRICAL AND POWER GENERATION EQUIPMENT
20 HP MARATHON ELECTRIC MOTOR MODEL: EVN 256TTFCA4026 60 HZ 208-230/460 VOLTS 52-47/23.5 AMPS 1770 R...
Hammer Price:
🔒
WEG W22
ELECTRICAL AND POWER GENERATION EQUIPMENT
30 HP WEG W22 INVERTER DUTY MOTOR MODEL FRAME 284/6TS 460 VOLT 33.8 AMP 3 PH 60 HZ 3535 RPM DIMENSIO...
Hammer Price:
🔒
MEYER VFII/SF-18-6
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
MEYER SS VIBRATORY FEED CONVEYOR AND HOPPER, MODEL VFII/SF-18-6, SN2132. .51 HP MOTOR, 230/460/3/60....
Hammer Price:
🔒
2009 KSB MTC V 50/6D-041-10 63
TANKS, PUMPS & STORAGE EQUIPMENT
2009 KSB PUMP VERTICAL MULTI-STAGE CENTRIFUGAL PUMP, UNUSED MODEL: MTC V 50/6D-041-10 63 SN: 9971531...
Hammer Price:
🔒
GARDNER DENVER HOFFMAN NASH LAMSON TURBOTRON
MISC
GARDNER DENVER HOFFMAN NASH LAMSON BLOWER MODEL TURBOTRON MODEL TURBOTRON SERIAL POI5I28X SALES ORDE...
Hammer Price:
🔒
UNIVERSAL INDUSTRIES INC. SC SERIES
FOOD PROCESSING AND RESTAURANT EQUIPMENT
UNUSED UNIVERSAL INDUSTRIES STAINLESS STEEL BUCKET ELEVATOR SC SERIES. UNIVERSAL INDUSTRIES INC. VER...
Hammer Price:
🔒
HINKLE 97101
TANKS, PUMPS & STORAGE EQUIPMENT
HINKLE LOCTITE MMD PUMP SYSTEM 1000 MODEL 97101 COMPLETE WITH ELECTRIC HEATING ELEMENT, PUMP, AND RE...
Hammer Price:
🔒
2009 RAPAT BULK-FLO
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
2009 RAPAT BULK-FLO CHAIN CONVEYOR 6" X 12" 53'-8" DISCHARGE HEIGHT. 21'-3" CENTER OF FEED TO HORIZO...
Hammer Price:
🔒
SCHENCK ACCURATE
FOOD PROCESSING AND RESTAURANT EQUIPMENT
3" DIAMETER X 32" LONG SCHENCK ACCURATE SCREW FEEDER, STAINLESS STEEL...
Hammer Price:
🔒
AMERICAN FAN COMPANY AF-9
DUST COLLECTION EQUIPMENT
1 HP AMERICAN FAN COMPANY MODEL AF-9 CAST ALUMINUM BLOWER SERIAL #: 986788-2 4 1/2" DIAMETER INLET W...
Hammer Price:
🔒
BRAY 416SS
TANKS, PUMPS & STORAGE EQUIPMENT
LOT OF 3 BRAY BUTTERFLY VALVES 2) 6" & 1) 4" SS UNUSED 6" & 4" DIAMEYER 416SS STEM 316SS DISC A126 B...
Hammer Price:
🔒
GARDNER DENVER HYFMJBA
AIR COMPRESSORS
75 HP GARDNER DENVER HELIFLOW MODEL HYFMJBA CATALOG # HF616 VERY LOW HOURS OF USE MODEL HYFMJBA SERI...
Hammer Price:
🔒
GARDNER DENVER GABHBPA
AIR COMPRESSORS
5 HP GARDNER DENVER BLOWER PACKAGE MODEL GABHBPA CATALOG NO. 3HP MODEL GABHBPA SERIAL # S150743 CATA...
Hammer Price:
🔒
DESM SIER-BATH LSIM
TANKS, PUMPS & STORAGE EQUIPMENT
DESM SIER-BATH GEAR PUMP, ROTARY SCREW PUMP, UNUSED. SIZE: LSIM DOUBLE SUCTION GEAR PUMP RATED FOR 8...
Hammer Price:
🔒
2009 RAPAT G
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
2009 RAPAT MODEL G DRAG CHAIN CONVEYOR 15" WIDE X 16" HIGH. CONVEYOR IS 22'-0" CENTER OF FEED TO CEN...
Hammer Price:
🔒
CHAMPION 182
MISC
UNUSED CHAMPION FAN SIZE 182; ARRANGMENT 10; CLASS II II; CWTH ROTATION, BACKWARD INCLINED NON OVERL...
Hammer Price:
🔒
MARTIN
PACKAGING EQUIPMENT
18" DIA. STAINLESS BIN ACTIVATOR LIVE BOTTOM W/ 8 CUBIC FOOT CAPACITY. BIN IS 18 INCH DIAMETER BY 42...
Hammer Price:
🔒
WYSSMONT DRCB-104
PACKAGING EQUIPMENT
4" WIDE X 12" LONG WYSSMONT DOUBLE ROTOCAGE LUMPBREAKER MODEL DRCB-104; ALL STAINLESS STEEL MODEL DR...
Hammer Price:
🔒
METO SYSTEMS CONE BIN BOTTOM ATTACHMENT
FOOD PROCESSING AND RESTAURANT EQUIPMENT
METO LIFT STAINLESS STEEL CONE BIN BOTTOM ATTACHMENT. FOOD GRADE CONSTRUCTION. UNUSED UNLOADING HOPP...
Hammer Price:
🔒
MISC
LUMP CATCHER WITH CLEANOUT PORT 4.5" OD INLET 6" ID OUTLET 9" OD OUTLET FLANGE STAINLESS CONSTRUCTIO...
Hammer Price:
🔒
VRF2D2G1A
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
40 CUBIC FEET STAINLESS DRY MATERIAL HOPPER, UNUSED 90" OVERALL HEIGHT; 7.5" X 22" INLET; 6" DIAMETE...
Hammer Price:
🔒
2017 NEW YORK BLOWER 2612
MISC
2017 NEW YORK BLOWER MODEL 2612 STEEL PRESSURE BLOWER, ARR-8 BUILT IN 2017 3305 CFM 53.6" WG SP 50 H...
Hammer Price:
🔒
JOHN E SMITH AND SONS TWIN SHAFT PADDLE BLENDER
MISC
10 CUBIC FOOT, 10 HP JOHN E SMITH AND SONS, BUFFALO, NY TWIN SHAFT PADDLE BLENDER STAINLESS USED 10 ...
Hammer Price:
🔒
NEWELL MACHINERY COMPANY
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
[UNUSED] NEWELL MACHINERY COMPANY SCREW CONVEYOR. 9" DIAMETER X 8' LONG U-TROUGH SCREW CONVEYOR. HIN...
Hammer Price:
🔒
GARDNER DENVER GAHMBLA 8ML
AIR COMPRESSORS
50 HP EXCELSIOR SUTORBILT GARDNER DENVER SEMCO SYSTEM BLOWER PACKAGE MODEL # BUS 047 GAHMBLA 8ML U23...
Hammer Price:
🔒
SHIPCO 110D 152 LPC
TANKS, PUMPS & STORAGE EQUIPMENT
SHIPCO PUMP TYPE 110D; MODEL 152 LPC; 1/2 HP, 115/208-230 1 PH 60 HZ; NEW SURPLUS. RATED AT 22.5 GPM...
Hammer Price:
🔒
NATIONAL BULK EQUIPMENT POWDER BLENDING HOPPER 48
TANKS, PUMPS & STORAGE EQUIPMENT
26 CUBIC FOOT NBE NATIONAL BULK EQUIPMENT POWDER BLENDING HOPPER 48, 26 CUBIC FOOT NBE NATIONAL BULK...
Hammer Price:
🔒
PRATER CNHJS4110Y
MISC
12" DIAM PRATER ROTARY AIRLOCK CARBON STEEL FOR PARTS/REPAIR, 12" DIAM INLET/OUTLET WITH 16 3/4" FLA...
Hammer Price:
🔒
WESTINGHOUSE
ELECTRICAL AND POWER GENERATION EQUIPMENT
25 HP WESTINGHOUSE ELECTRIC MOTOR 885 RPM, FRAME 326T 25 HP 230/460 V 65/32.5 A 3 PH 60 HZ FRAME 326...
Hammer Price:
🔒