Fabrication Equipment Extrusion Lines Overhead Gantry Crane System Stretch Wrappers Wel
Category: MISC
Total Lots:
66
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
NELMOR | GRANULATOR SYSTEM |
NELMOR GRANULATOR SYSTEM W/ MAC AUTOMATION CONVEYOR - NELMOR GRANULATOR SYSTEM WITH MAC AUTOMATION CONCEPTS CONVEYOR AND CYCLONE SEPARATOR, EQUIPPED WITH A 2 HP BALDOR BLOWER MOTOR, 115V SINGLE PHASE, INCLUDES BLOWER, CONVEYOR, CYCLONE, FLEX DUCT, AND COLLECTION BIN, IDEAL FOR PLASTICS REGRIND AND SCRAP REDUCTION. S/N: 05172009-040-02-01-01
|
🔒 Subscribe | |
|
|
PPE | HL-3-RGB12 |
PPE HL-3-RGB12 GRAVIMETRIC BLENDER SYSTEM WITH CONAIR TRUEBLEND SB-4 CONTROLLER, FEATURING 4 MATERIAL HOPPERS (150 LBS EACH), MAX THROUGHPUT 880 LBS/HR, INTEGRATED PPE BOX DUMPER/TILTER, VACUUM LOADER CONTROLS, AND STEEL DRUM DOLLY, POWER 120V/60HZ, S/N: HL3RGB191018.
|
🔒 Subscribe | |
|
|
2018 | FARO | FAROARM TITANIUM 7-AXIS |
2018 FARO FAROARM TITANIUM 7-AXIS PORTABLE COORDINATE MEASURING MACHINE, FEATURES 0.051 MM (0.0020 IN) SINGLE POINT ACCURACY, 0.072 MM (0.0028 IN) VOLUMETRIC ACCURACY, WORKING VOLUME ESTIMATED AT 8 FT (2.4 M) DIAMETER, USB CONNECTIVITY, TOUCH PROBE, INCLUDES TRIPOD AND HARD TRANSPORT CASE. S/N: N08-02-06-04683
|
🔒 Subscribe |
|
|
CLAUSING COLCHESTER | 15 |
15 INCH SWING X 50 INCH CENTERS CLAUSING COLCHESTER ENGINE LATHE WITH 50 INCH BETWEEN CENTERS, 7.5 HP MAIN MOTOR, EQUIPPED WITH NEWALL DP500 DIGITAL READOUT, COOLANT PUMP, THREAD/FEED CHART, SAFETY SHIELD, RUNS ON 460V 3-PHASE POWER, APPROXIMATE WEIGHT 4,400 LBS, TOTAL POWER CONSUMPTION 7.55 HP. S/N:
|
🔒 Subscribe | |
|
|
2020 | FARO | EDGE REV 4.0 |
2020 FARO EDGE REV 4.0 7-AXIS PORTABLE CMM ARM, 9FT REACH, SINGLE POINT ACCURACY 0.0410 MM, VOLUMETRIC ACCURACY 0.0290 MM, INCLUDES DELL LAPTOP CONTROLLER, TWO FARO ACCESSORY CASES, PROBE/HANDLE, AND ROLLING HARD CASE. S/N: E09-05-15-13342
|
🔒 Subscribe |
|
|
LARGE MIXED LOT OF LABORATORY AND WORKSHOP EQUIPMENT INCLUDING POWER SUPPLIES, ELECTRONIC TEST INSTRUMENTS, TOOL CASES, HAND TOOLS, WIRING, STORAGE BINS, INDUSTRIAL LAMP, AND ACCESSORIES; INCLUDES MULTIPLE BRANDS AND MODELS, ITEM COUNT APPROX 30+, TOTAL ESTIMATED SIZE 6 FT X 2 FT X 6 FT, ESTIMATED WEIGHT 300 LBS. INCLUDES U-LINE BAKERS RACK.
|
🔒 Subscribe | |||
|
|
TAYLOR-DUNN | MX-600 |
TAYLOR-DUNN MX-600 ELECTRIC UTILITY CART WITH BUILT-IN TOOL CHEST, BENCH VISE, 24V SYSTEM, HOUR METER AT 1,996.9, 2 SEATS, PNEUMATIC TIRES, 600 LB. CARGO CAPACITY, 2,500 LB. TOWING CAPACITY, 10 MPH TOP SPEED, OVERALL 128"X36"X46".
|
🔒 Subscribe | |
|
|
VULCAN | 60 |
VULCAN 60" 10-BURNER COMMERCIAL NATURAL GAS RANGE WITH DOUBLE STANDARD OVENS, STAINLESS STEEL CONSTRUCTION, MANUAL CONTROLS, 30,000 BTU BURNERS, 35,000 BTU OVENS, 4 OVEN RACKS, INTEGRATED BACKSPLASH AND HIGH SHELF, APPROXIMATE SIZE 60" W X 34" D X 58" H, 780 LBS. S/N:
|
🔒 Subscribe | |
|
|
ADAPTOP |
ADAPTOP INDUSTRIAL GLASS DOOR STORAGE CABINET WITH ASSORTED PRECISION INSPECTION GAGES AND SUPPLIES, STEEL CONSTRUCTION, DOUBLE GLASS SWING DOORS, 5 ADJUSTABLE SHELVES, INTEGRATED LOCKING HANDLE, INCLUDES BOXED GAGE BLOCKS, DIAL INDICATORS, BENCH GAUGE STAND, VARIOUS CALIBRATION TOOLS, CLEANING SUPPLIES, APPROXIMATE DIMENSIONS 78-INCH X 36-INCH X 18-INCH.
|
🔒 Subscribe | ||
|
|
UNICARRIERS | CG25 |
UNICARRIERS CG25 FORKLIFT 4,400 LB LPG, 3-STAGE MAST, SIDESHIFT, 187 INCH LIFT HEIGHT, SOLID PNEUMATIC TIRES, POWERSHIFT AUTOMATIC TRANSMISSION, SIT-DOWN RIDER CONFIGURATION, OVERHEAD GUARD, REAR-VIEW MIRRORS, BEACON, SEATBELT, REAR GRAB BAR, INCLUDED PROPANE TANK, INCLUDED FORKS, TRUCK WEIGHT 8,070 LBS (3,660 KG), S/N: CP1F2-9W1946 (DOES NOT RUN- NEEDS NEW BATTERY AND STARTER)
|
🔒 Subscribe | |
|
|
PRECISION PIN GAGE SET, MEASURING RANGE 0.061 INCH TO 1.000 INCH, 0.001 INCH INCREMENTS, APPROXIMATELY 400 HARDENED TOOL STEEL PINS, INCLUDES FOUR WALL-MOUNTED WOODEN/ALUMINUM CASES WITH CLEAR COVERS, EACH CASE MEASURES APPROXIMATELY 24X16X4 INCH, ESTIMATED PIN LENGTH 2.000 INCH.
|
🔒 Subscribe | |||
|
|
MCCULLOUGH | 20055 |
MCCULLOUGH MODEL 20055 2-YARD CAPACITY SELF-DUMPING HOPPER WITH 6,000 LB LOAD RATING, HEAVY-DUTY STEEL CONSTRUCTION, CASTER BASE FOR MOBILITY, MANUAL DUMP RELEASE, FORK POCKETS, EXTERIOR DIMENSIONS 72" X 55" X 40", SAFETY CHAIN INCLUDED, INDUSTRIAL GRAY FINISH, S/N: 55700L.
|
🔒 Subscribe | |
|
|
PRESTO ECOA | AT10-4848 |
PRESTO ECOA AT10-4848 AIRBAG PALLET POSITIONER, 48"X48" PLATFORM, 1,000 LB CAPACITY, PNEUMATIC OPERATION USING SHOP AIR, ADJUSTABLE LIFT HEIGHT RANGE 9-12" TO 27-34", HEAVY-DUTY STEEL CONSTRUCTION, S/N: V78944-1/1485979-1
|
🔒 Subscribe | |
|
|
VESTIL | D-200-HD |
2000 VESTIL D-200-HD HEAVY DUTY SELF-DUMPING HOPPER, 2 CUBIC YARD VOLUME, 6,000 LB. CAPACITY, 72" X 60" X 44" OVERALL DIMENSIONS, WELDED STEEL CONSTRUCTION, EMPTY WEIGHT 900 LBS., 7.5" X 2.5" FORK POCKETS, MECHANICAL AUTO-LATCH DUMPING, SAFETY CHAIN, S/N: S1737342
|
🔒 Subscribe | |
|
|
KALAMAZOO | OA 39 |
KALAMAZOO OA 39 INDUSTRIAL COLD SAW WITH 14 INCH BLADE, MANUAL VISE, 220V, INFEED/OUTFEED ROLLER TABLES, COOLANT SYSTEM, CHIP BINS, 3 HP MOTOR, 3 INCH ROUND CUTTING CAPACITY, 800 LBS, S/N: 507
|
🔒 Subscribe | |
|
|
MITUTOYO | CFC-60"C |
60 INCH MITUTOYO CFC-60"C DIGITAL CALIPER, FEATURES CARBON FIBER FRAME, LARGE 15.75 INCH JAWS, DIGITAL LCD DISPLAY, MM/INCH CONVERSION, HOLD AND PRESET FUNCTIONS, INCLUDES WOOD CASE AND CALIBRATION/TEST BLOCKS. S/N: 0003674
|
🔒 Subscribe | |
|
|
MCCULLOUGH INDUSTRIES | 10099 |
MCCULLOUGH INDUSTRIES 10099 SELF-DUMPING HOPPER, 1 CUBIC YARD CAPACITY, HOLDS UP TO 4,000 LBS., CONSTRUCTED FROM 12-GAUGE STEEL, EQUIPPED WITH MANUAL SELF-DUMPING LATCH, OVERALL DIMENSIONS 62 X 40 X 40 INCH.
|
🔒 Subscribe | |
|
|
MILWAUKEE | 4202 |
MILWAUKEE 4202 ELECTROMAGNETIC DRILL PRESS, 120V, 9.5A, 1/2-INCH JACOBS CHUCK, 350 RPM, MAGNETIC BASE, 1-1/2-INCH MAX DRILLING CAPACITY, 1600 LB ADHESION FORCE.
|
🔒 Subscribe | |
|
|
KENNEDY | 17-DRAWER |
KENNEDY ROLLING TOOL CHEST WITH 17 DRAWERS, INDUSTRIAL STEEL CONSTRUCTION, INCLUDES ASSORTED WRENCHES, PLIERS, SCREWDRIVERS, NUT DRIVERS, HAMMERS, VICE GRIPS, ALLEN KEYS, AND MORE; APPROX. 29" W X 20" D X 44" H, WEIGHS ~300 LBS LOADED, LOCKING DRAWERS, HEAVY-DUTY CASTERS.
|
🔒 Subscribe | |
|
|
DELTRONIC | DA-14MPC |
14 INCH OPTICAL COMPARATOR - DELTRONIC DA-14MPC OPTICAL COMPARATOR WITH 14 INCH SCREEN, DELTRONIC MPC-1 2-AXIS DRO, VISE/WORK STAGE, 8 IN X AND 4 IN Y TRAVEL, 120V~60HZ 12AMP POWER, SURFACE/CONTOUR ILLUMINATION, S/N: A4809395
|
🔒 Subscribe | |
|
|
10-STEP INDUSTRIAL ROLLING SAFETY LADDER WITH 450 LB CAPACITY, STEEL FRAME, POWDER COATED FINISH, 4 SWIVEL CASTERS, 24-INCH WIDE SLIP-RESISTANT STEPS, GUARDRAILS AND HANDRAILS. S/N: M0225 / D00800298
|
🔒 Subscribe | |||
|
|
2013 | NEDERMAN | FILTERBOX 10M |
2013 NEDERMAN FILTERBOX 10M PNEUMATIC FUME EXTRACTOR WITH 120V SINGLE-PHASE POWER, 900500 MA3/H AIRFLOW, INCLUDES FLEXIBLE EXTRACTION ARM, MOBILE CART.
|
🔒 Subscribe |
|
|
ACU-GAGE | AC36-2-RL |
ACU-GAGE AC36-2-RL COORDINATE MEASURING MACHINE WITH QUADRA-CHEK 200 CONTROLLER, FEATURES A 36X48 INCH GLASS MEASURING TABLE, OPTICAL VIDEO PROBE, ESTIMATED ACCURACY 0.0005 INCH, RESOLUTION 0.0001 INCH. S/N: 1922
|
🔒 Subscribe | |
|
|
COTTERMAN | 8-STEP |
COTTERMAN 8-STEP ROLLING STEEL WAREHOUSE LADDER, 70 INCH PLATFORM HEIGHT, 450 LB CAPACITY, STEEL CONSTRUCTION, SPRING-LOADED CASTERS, MESH ANTI-SLIP STEPS, HANDRAILS, GRAY ENAMEL FINISH, APPROXIMATE OVERALL HEIGHT 101 INCH, PLATFORM SIZE 24 INCH X 24 INCH.
|
🔒 Subscribe | |
|
|
5-STEP ROLLING WAREHOUSE SAFETY LADDER WITH PERFORATED ANTI-SLIP TREADS, STEEL FRAME, HANDRAILS, APPROXIMATE PLATFORM HEIGHT 50-60 INCHES (127-152 CM), LOAD CAPACITY 350 LBS. (159 KG).
|
🔒 Subscribe | |||
|
|
MANITOWOC | B170 |
MANITOWOC B170 COMMERCIAL ICE STORAGE BIN WITH 150 LB (68.0 KG) STORAGE CAPACITY, STAINLESS STEEL EXTERIOR WITH POLYETHYLENE LINER, DIMENSIONS 30 X 34 X 38 INCH (762MM X 864MM X 965MM), COMPATIBLE WITH MANITOWOC 22, 30, AND 48 INCH ICE MACHINE HEADS, REAR 0.75 INCH FPT DRAIN, APPROXIMATE EMPTY WEIGHT 115 LBS (52.2 KG). S/N: 050321037.
|
🔒 Subscribe | |
|
|
VERIVIDE |
VERIVIDE COLOUR ASSESSMENT LIGHT BOX, 48"X24" VIEWING AREA, 220V, 4 SWITCHABLE LIGHT SOURCES.
|
🔒 Subscribe | ||
|
|
ANVER | VT160-2.5-D5 |
ANVER VT160-2.5-D5 VACUUM TUBE LIFTER WITH A MAXIMUM CAPACITY OF 120 LBS, MOUNTED ON A GORBEL OVERHEAD RAIL SYSTEM RATED AT 250 LBS, INCLUDES INTEGRATED SIDE-CHANNEL BLOWER (480V, 3-PHASE), CONTROL PENDANT, ORANGE FLEXIBLE VACUUM HOSE, AND SUPPORT HARDWARE. FEATURES AN ONBOARD PRESSURE GAUGE, ELECTRIC CONTROLS, AND A SAFETY-RATED DISCONNECT PANEL. S/N: 611979-1.
|
🔒 Subscribe | |
|
|
THETFORD | SPIRAL PLASTIC PIPE EXTRUSION LINE |
THETFORD SPIRAL PLASTIC PIPE EXTRUSION LINE WITH AN APPROXIMATE 22 FT OVERALL LENGTH, 5 HEATING ZONES WITH UP TO 297C OPERATION, ANALOG CONTROL PANEL, INTEGRATED FEED HOPPER, WATER COOLING BATH, CATERPILLAR PULLER, MECHANICAL CUTTER, ESTIMATED 8,000 LBS WEIGHT, SUPPORTS POLYOLEFIN AND PVC MATERIALS, OVERALL DIMENSIONS 22 FT X 3 FT X 7 FT (6.7M X 0.9M X 2.1M), INCLUDES STANDS.
|
🔒 Subscribe | |
|
|
THETFORD | HELIX/SPIRAL |
HELIX/SPIRAL EXTRUSION LINE FEATURING 6 HEATER ZONES, DOWNSTREAM COOLING TANK, HAUL-OFF, INTEGRATED CUTTER, ANALOG/DIGITAL CONTROLS, HANDWHEEL ADJUSTMENT, MATERIAL VACUUM LOADER, APPROXIMATE DIMENSIONS 40 FT X 4 FT X 7 FT (12.2 M X 1.2 M X 2.1 M), ESTIMATED WEIGHT 6,000 LBS (2,720 KG), S/N: 9613120.
|
🔒 Subscribe | |
|
|
3M-MATIC | 700A |
3M-MATIC 700A ADJUSTABLE CASE SEALER TYPE 29200, SIDE BELT DRIVE, 115V, 3.8A, 440W, 60HZ, TAPE WIDTH CAPACITY 2-3 INCH, MIN CASE 6" X 6.5" X 4.75", MAX CASE 21.5" W X 24.5" H, ADJUSTABLE CONVEYOR HEIGHT 21.2"-29.8", UP TO 40 CPM, CASTER WHEELS, S/N: 5052.
|
🔒 Subscribe | |
|
|
COTTERMAN | 8-STEP ROLLING WAREHOUSE LADDER |
COTTERMAN 8-STEP ROLLING WAREHOUSE LADDER, 350 LB CAPACITY WITH STEEL MESH STEPS, TALL HANDRAILS, SPRING-LOADED CASTERS, PLATFORM HEIGHT APPROX. 50 INCH, OVERALL HEIGHT APPROX. 92 INCH, 24 INCH STEP WIDTH, 350 LB CAPACITY. MANUFACTURED BY J.D. COTTERMAN CO.
|
🔒 Subscribe | |
|
|
2014 | BALLYMORE | 7-STEP |
2014 BALLYMORE 7-STEP ROLLING SAFETY LADDER, 450 LB. CAPACITY WITH HANDRAILS, STEEL CONSTRUCTION, SLIP-RESISTANT PERFORATED STEPS, WHEELED BASE WITH LOCKING CASTERS, OVERALL HEIGHT APPROXIMATELY 110 IN, OVERALL LENGTH 73 IN, OVERALL WIDTH 29 IN, PLATFORM DIMENSIONS 24X24 INCH, PLATFORM HEIGHT 70 IN.
|
🔒 Subscribe |
|
|
ULINE | 5-STEP INDUSTRIAL ROLLING LADDER |
ULINE 5-STEP INDUSTRIAL ROLLING LADDER, STEEL, 450 LB. CAPACITY, 24 INCH WIDE STEPS, HANDRAILS, GRAY FINISH, TOP STEP HEIGHT APPROX. 50 INCH (127 CM).
|
🔒 Subscribe | |
|
|
EDSAL |
EDSAL STEEL INDUSTRIAL LOCKERS, 54 COMPARTMENTS, OVERALL UNIT SIZE 72"X12"X12" PER SECTION, DARK GRAY COLOR, VENTILATED DOORS WITH NAME PLATE HOLDERS AND PADLOCK-READY HANDLES, WELDED STEEL CONSTRUCTION, FREE-STANDING DESIGN, WEIGHT PER SECTION APPROX. 95 LBS (43 KG).
|
🔒 Subscribe | ||
|
|
GORBEL | 250 LB OVERHEAD CRANE SYSTEM |
250 LB GORBEL WORKSTATION BRIDGE CRANE SYSTEM WITH DUAL 120 LB ANVER VACUUM TUBE LIFTERS AND A 300 LB ARO AIR CHAIN HOIST, APPROX. 25 FT SPAN, COMPRESSED AIR OPERATION, MANUAL VACUUM LIFT HANDLES, PNEUMATIC CHAIN HOIST CONTROLS. BUYER MUST REMOVE ELECTRIC DISCONNECT, AIR SUPPLY DISCONNECT & VACUUM PIPE.
|
🔒 Subscribe | |
|
|
POWERMATIC | 1150 |
POWERMATIC 1150 FLOOR DRILL PRESS, 1 HP MOTOR, 120V SINGLE PHASE, 300-4800 RPM VARIABLE SPEEDS, MORSE TAPER NO. 2 SPINDLE, 5/8 INCH STEEL DRILLING CAPACITY, 4 INCH QUILL TRAVEL, 14X11 INCH TABLE, SAFETY SHIELD, S/N: 66-7449-1
|
🔒 Subscribe | |
|
|
2022 | SIGNODE | MOD-710 |
2022 SIGNODE MOD-710 AUTOMATIC STRAPPING MACHINE WITH INTEGRATED ROLLER AND BELT CONVEYOR, 60"X60" CHUTE SIZE, 230V 3-PHASE INPUT, 0.5 HP MOTOR, SUPPORTS 7/16" STRAP, ADVANCED CONTROL PANEL WITH KEYED ACCESS, EMERGENCY STOP SYSTEM, LOCKING GUARD SAFETY. MANUAL CONVEYER #1 - 8'X42", MANUAL CONVEYOR #2 14'X42", MOTORIZED CONVEYOR APPROX. 12'X42". S/N: MO953
|
🔒 Subscribe |
|
|
2021 | SIGNODE | MOD-710 |
2021 SIGNODE MOD-710 AUTOMATIC CONVEYOR STRAPPING SYSTEM, INCLUDES 60"X60" CHUTE, 7/16" STRAP SIZE, 230V, 3 PHASE, 0.5 HP MOTOR, TOUCHSCREEN HMI AND MANUAL CONTROLS, DUAL CONTROL PANELS, SAFETY GUARDS, POWERED ROLLER CONVEYORS, LENGTH APPROX. 30', WIDTH APPROX. 7', SERIAL NUMBER MO926. MANUAL CONVEYOR #1 8'X46", MANUAL CONVEYOR #2 15'X46", MOTORIZED CONVEYOR APPROX. 12'X45".
|
🔒 Subscribe |
|
|
DAYTON | 55NR94A |
DAYTON MANUAL PALLET JACK, 4,400 LB. CAPACITY, 48 INCH FORK LENGTH, 27 INCH FORK WIDTH, POLYURETHANE WHEELS, STEEL CONSTRUCTION, ERGONOMIC HANDLE. S/N:
|
🔒 Subscribe | |
|
|
WATERLOO | 3-DRAWER MOBILE TOOL CART |
2023 WATERLOO 3-DRAWER MOBILE TOOL CART, BLACK STEEL CONSTRUCTION WITH PLASTIC ORGANIZER TOP, 32" X 18" X 38", INCLUDES THREE DRAWERS, ORGANIZER TRAYS, ASSORTED HAND TOOLS (SCREWDRIVERS, HEX KEYS), POWER SUPPLY, STORAGE BOX, FOUR SWIVEL CASTERS.
|
🔒 Subscribe | |
|
|
EMABOND SOLUTIONS | C24-3S-HL |
2000 EMABOND SOLUTIONS C24-3S-HL RADIO-FREQUENCY WELDER WITH 240V, SINGLE-PHASE, 100 PSI WORKING PRESSURE, OMRON TOUCHSCREEN CONTROLS, SAFETY LIGHT CURTAIN, INTEGRATED PNEUMATIC AND FILTRATION SYSTEMS, FULL ENCLOSURE.
|
🔒 Subscribe | |
|
|
MITCHELL'S |
MITCHELL'S GRANITE SURFACE PLATE 48"X24"X8" WITH STAND, GRADE A, SERIAL TC2137, FEATURES STEEL FRAME STAND, CALIBRATION STICKER (EXPIRED 9-12-22), GRANITE SURFACE, BLUE TEST INSTRUMENT CASE, FARO ARM MOUNT COMPATIBILITY, LABORATORY ENVIRONMENT, PLATE SERVICED BY MITCHELL'S.
|
🔒 Subscribe | ||
|
|
ULINE | H-6710 |
ULINE H-6710 NARROW FORK INDUSTRIAL PALLET JACK, 5,500 LB. LOAD CAPACITY, 48 INCH FORK LENGTH, 20.5 INCH OVERALL FORK WIDTH, 2.9 INCH LOWERED HEIGHT, 7.5 INCH RAISED HEIGHT.
|
🔒 Subscribe | |
|
|
DAYTON | 16" FLOOR DRILL PRESS |
DAYTON 16" FLOOR DRILL PRESS, 3/4 HP, 12 SPEEDS, 5/8" CHUCK, 16" SWING, 12"X12" TABLE, MT2 SPINDLE TAPER, SPINDLE TRAVEL 3-1/8".
|
🔒 Subscribe | |
|
|
DAYTON | 3Z919A |
DAYTON TRADESMAN 20 INCH FLOOR DRILL PRESS, MODEL 3Z919A, FEATURES A 1 HP MOTOR, 9 SPINDLE SPEEDS (150-4200 RPM), 5/8 INCH CHUCK, 115/230V SINGLE PHASE POWER, 18 INCH X 20 INCH TABLE, 6 INCH SPINDLE TRAVEL, 26 INCH MAX DISTANCE SPINDLE-TO-TABLE, 44 INCH SPINDLE-TO-BASE.
|
🔒 Subscribe | |
|
|
ULINE | H-1043 |
2000 ULINE H-1043 STANDARD FORK PALLET JACK, MANUAL OPERATION, 27 INCH FORK WIDTH, 48 INCH FORK LENGTH, 5,500 LB LOAD CAPACITY, MINIMUM FORK HEIGHT 2.9 INCH, MAXIMUM HEIGHT 7.5 INCH.
|
🔒 Subscribe | |
|
|
SCHAEFER | 36CFO-Y |
2000 SCHAEFER 36" INDUSTRIAL PEDESTAL FAN 36CFO-Y
|
🔒 Subscribe | |
|
|
ULINE | H-9612 |
20XX ULINE H-9612 LOW PROFILE PALLET JACK, 4,400 LB LOAD CAPACITY, 48 INCH FORK LENGTH, 27 INCH OVERALL FORK WIDTH.
|
🔒 Subscribe | |
|
|
SCHAEFER | 36CFO-Y |
2000 SCHAEFER 36" INDUSTRIAL PEDESTAL FAN 36CFO-Y
|
🔒 Subscribe |
NELMOR GRANULATOR SYSTEM
NELMOR GRANULATOR SYSTEM W/ MAC AUTOMATION CONVEYOR - NELMOR GRANULATOR SYSTEM WITH MAC AUTOMATION C...
PPE HL-3-RGB12
PPE HL-3-RGB12 GRAVIMETRIC BLENDER SYSTEM WITH CONAIR TRUEBLEND SB-4 CONTROLLER, FEATURING 4 MATERIA...
2018 FARO FAROARM TITANIUM 7-AXIS
2018 FARO FAROARM TITANIUM 7-AXIS PORTABLE COORDINATE MEASURING MACHINE, FEATURES 0.051 MM (0.0020 I...
CLAUSING COLCHESTER 15
15 INCH SWING X 50 INCH CENTERS CLAUSING COLCHESTER ENGINE LATHE WITH 50 INCH BETWEEN CENTERS, 7.5 H...
2020 FARO EDGE REV 4.0
2020 FARO EDGE REV 4.0 7-AXIS PORTABLE CMM ARM, 9FT REACH, SINGLE POINT ACCURACY 0.0410 MM, VOLUMETR...
LARGE MIXED LOT OF LABORATORY AND WORKSHOP EQUIPMENT INCLUDING POWER SUPPLIES, ELECTRONIC TEST INSTR
TAYLOR-DUNN MX-600
TAYLOR-DUNN MX-600 ELECTRIC UTILITY CART WITH BUILT-IN TOOL CHEST, BENCH VISE, 24V SYSTEM, HOUR METE...
VULCAN 60
VULCAN 60" 10-BURNER COMMERCIAL NATURAL GAS RANGE WITH DOUBLE STANDARD OVENS, STAINLESS STEEL CONSTR...
ADAPTOP
ADAPTOP INDUSTRIAL GLASS DOOR STORAGE CABINET WITH ASSORTED PRECISION INSPECTION GAGES AND SUPPLIES,...
UNICARRIERS CG25
UNICARRIERS CG25 FORKLIFT 4,400 LB LPG, 3-STAGE MAST, SIDESHIFT, 187 INCH LIFT HEIGHT, SOLID PNEUMAT...
PRECISION PIN GAGE SET, MEASURING RANGE 0.061 INCH TO 1.000 INCH, 0.001 INCH INCREMENTS, APPROXIMATE
MCCULLOUGH 20055
MCCULLOUGH MODEL 20055 2-YARD CAPACITY SELF-DUMPING HOPPER WITH 6,000 LB LOAD RATING, HEAVY-DUTY STE...
PRESTO ECOA AT10-4848
PRESTO ECOA AT10-4848 AIRBAG PALLET POSITIONER, 48"X48" PLATFORM, 1,000 LB CAPACITY, PNEUMATIC OPERA...
VESTIL D-200-HD
2000 VESTIL D-200-HD HEAVY DUTY SELF-DUMPING HOPPER, 2 CUBIC YARD VOLUME, 6,000 LB. CAPACITY, 72" X ...
KALAMAZOO OA 39
KALAMAZOO OA 39 INDUSTRIAL COLD SAW WITH 14 INCH BLADE, MANUAL VISE, 220V, INFEED/OUTFEED ROLLER TAB...
MITUTOYO CFC-60"C
60 INCH MITUTOYO CFC-60"C DIGITAL CALIPER, FEATURES CARBON FIBER FRAME, LARGE 15.75 INCH JAWS, DIGIT...
MCCULLOUGH INDUSTRIES 10099
MCCULLOUGH INDUSTRIES 10099 SELF-DUMPING HOPPER, 1 CUBIC YARD CAPACITY, HOLDS UP TO 4,000 LBS., CONS...
MILWAUKEE 4202
MILWAUKEE 4202 ELECTROMAGNETIC DRILL PRESS, 120V, 9.5A, 1/2-INCH JACOBS CHUCK, 350 RPM, MAGNETIC BAS...
KENNEDY 17-DRAWER
KENNEDY ROLLING TOOL CHEST WITH 17 DRAWERS, INDUSTRIAL STEEL CONSTRUCTION, INCLUDES ASSORTED WRENCHE...
DELTRONIC DA-14MPC
14 INCH OPTICAL COMPARATOR - DELTRONIC DA-14MPC OPTICAL COMPARATOR WITH 14 INCH SCREEN, DELTRONIC MP...
10-STEP INDUSTRIAL ROLLING SAFETY LADDER WITH 450 LB CAPACITY, STEEL FRAME, POWDER COATED FINISH, 4
2013 NEDERMAN FILTERBOX 10M
2013 NEDERMAN FILTERBOX 10M PNEUMATIC FUME EXTRACTOR WITH 120V SINGLE-PHASE POWER, 900500 MA3/H AIRF...
ACU-GAGE AC36-2-RL
ACU-GAGE AC36-2-RL COORDINATE MEASURING MACHINE WITH QUADRA-CHEK 200 CONTROLLER, FEATURES A 36X48 IN...
COTTERMAN 8-STEP
COTTERMAN 8-STEP ROLLING STEEL WAREHOUSE LADDER, 70 INCH PLATFORM HEIGHT, 450 LB CAPACITY, STEEL CON...
5-STEP ROLLING WAREHOUSE SAFETY LADDER WITH PERFORATED ANTI-SLIP TREADS, STEEL FRAME, HANDRAILS, APP
MANITOWOC B170
MANITOWOC B170 COMMERCIAL ICE STORAGE BIN WITH 150 LB (68.0 KG) STORAGE CAPACITY, STAINLESS STEEL EX...
VERIVIDE
VERIVIDE COLOUR ASSESSMENT LIGHT BOX, 48"X24" VIEWING AREA, 220V, 4 SWITCHABLE LIGHT SOURCES....
ANVER VT160-2.5-D5
ANVER VT160-2.5-D5 VACUUM TUBE LIFTER WITH A MAXIMUM CAPACITY OF 120 LBS, MOUNTED ON A GORBEL OVERHE...
THETFORD SPIRAL PLASTIC PIPE EXTRUSION LINE
THETFORD SPIRAL PLASTIC PIPE EXTRUSION LINE WITH AN APPROXIMATE 22 FT OVERALL LENGTH, 5 HEATING ZONE...
THETFORD HELIX/SPIRAL
HELIX/SPIRAL EXTRUSION LINE FEATURING 6 HEATER ZONES, DOWNSTREAM COOLING TANK, HAUL-OFF, INTEGRATED ...
3M-MATIC 700A
3M-MATIC 700A ADJUSTABLE CASE SEALER TYPE 29200, SIDE BELT DRIVE, 115V, 3.8A, 440W, 60HZ, TAPE WIDTH...
COTTERMAN 8-STEP ROLLING WAREHOUSE LADDER
COTTERMAN 8-STEP ROLLING WAREHOUSE LADDER, 350 LB CAPACITY WITH STEEL MESH STEPS, TALL HANDRAILS, SP...
2014 BALLYMORE 7-STEP
2014 BALLYMORE 7-STEP ROLLING SAFETY LADDER, 450 LB. CAPACITY WITH HANDRAILS, STEEL CONSTRUCTION, SL...
ULINE 5-STEP INDUSTRIAL ROLLING LADDER
ULINE 5-STEP INDUSTRIAL ROLLING LADDER, STEEL, 450 LB. CAPACITY, 24 INCH WIDE STEPS, HANDRAILS, GRAY...
EDSAL
EDSAL STEEL INDUSTRIAL LOCKERS, 54 COMPARTMENTS, OVERALL UNIT SIZE 72"X12"X12" PER SECTION, DARK GRA...
GORBEL 250 LB OVERHEAD CRANE SYSTEM
250 LB GORBEL WORKSTATION BRIDGE CRANE SYSTEM WITH DUAL 120 LB ANVER VACUUM TUBE LIFTERS AND A 300 L...
POWERMATIC 1150
POWERMATIC 1150 FLOOR DRILL PRESS, 1 HP MOTOR, 120V SINGLE PHASE, 300-4800 RPM VARIABLE SPEEDS, MORS...
2022 SIGNODE MOD-710
2022 SIGNODE MOD-710 AUTOMATIC STRAPPING MACHINE WITH INTEGRATED ROLLER AND BELT CONVEYOR, 60"X60" C...
2021 SIGNODE MOD-710
2021 SIGNODE MOD-710 AUTOMATIC CONVEYOR STRAPPING SYSTEM, INCLUDES 60"X60" CHUTE, 7/16" STRAP SIZE, ...
DAYTON 55NR94A
DAYTON MANUAL PALLET JACK, 4,400 LB. CAPACITY, 48 INCH FORK LENGTH, 27 INCH FORK WIDTH, POLYURETHANE...
WATERLOO 3-DRAWER MOBILE TOOL CART
2023 WATERLOO 3-DRAWER MOBILE TOOL CART, BLACK STEEL CONSTRUCTION WITH PLASTIC ORGANIZER TOP, 32" X ...
EMABOND SOLUTIONS C24-3S-HL
2000 EMABOND SOLUTIONS C24-3S-HL RADIO-FREQUENCY WELDER WITH 240V, SINGLE-PHASE, 100 PSI WORKING PRE...
MITCHELL'S
MITCHELL'S GRANITE SURFACE PLATE 48"X24"X8" WITH STAND, GRADE A, SERIAL TC2137, FEATURES STEEL FRAME...
ULINE H-6710
ULINE H-6710 NARROW FORK INDUSTRIAL PALLET JACK, 5,500 LB. LOAD CAPACITY, 48 INCH FORK LENGTH, 20.5 ...
DAYTON 16" FLOOR DRILL PRESS
DAYTON 16" FLOOR DRILL PRESS, 3/4 HP, 12 SPEEDS, 5/8" CHUCK, 16" SWING, 12"X12" TABLE, MT2 SPINDLE T...
DAYTON 3Z919A
DAYTON TRADESMAN 20 INCH FLOOR DRILL PRESS, MODEL 3Z919A, FEATURES A 1 HP MOTOR, 9 SPINDLE SPEEDS (1...
ULINE H-1043
2000 ULINE H-1043 STANDARD FORK PALLET JACK, MANUAL OPERATION, 27 INCH FORK WIDTH, 48 INCH FORK LENG...
SCHAEFER 36CFO-Y
2000 SCHAEFER 36" INDUSTRIAL PEDESTAL FAN 36CFO-Y...
ULINE H-9612
20XX ULINE H-9612 LOW PROFILE PALLET JACK, 4,400 LB LOAD CAPACITY, 48 INCH FORK LENGTH, 27 INCH OVER...
SCHAEFER 36CFO-Y
2000 SCHAEFER 36" INDUSTRIAL PEDESTAL FAN 36CFO-Y...