Waterpark Attractions Multiple Slides Flowrider Concessions Complete Park Closure Splash Zone Wildwood NJ

FLOWRIDER WAVE IN A BOX DOUBLE SELF-CONTAINED, TURNKEY SHEET-WAVE SURFING ATTRACTION, APPROX. 32 FT X 49 FT X 10 FT, SYNTHETIC SURFACING MATERIAL, 480V 3-PHASE, 1-2 RIDER CAPACITY, SIDE BARRIERS, WATER JETS. S/N: NJ-13-001.

WHITEWATER WEST INDUSTRIES TWIN-SLIDE ATTRACTION, COMPLETE. OVERALL SLIDE TOWER HEIGHT 40 FEET, APPROXIMATE FOOTPRINT FOR ATTRACTION IS 6,000 SQFT ( 550 SQ METERS) WITH AN IRREGULAR FOOTPRINT. INCLUDES TOWER STRUCTURE WITH STAIRS, ALL BRACING ELEMENTS, ENTRY BOXES, FIBERGLASS SLIDE SECTIONS, JOINT ASSEMBLIES, BULLET FLUMES. GREEN SLIDE "MIDNIGHT RUN" 54" ENCLOSED FLUME 395' TOTAL LENGTH, 40 FOOT TOTAL DROP, DOUBLE INNER TUBE RIDE, PINK SLIDE "SLIDE WINDER" 54" OPEN FLUME 372' TOTAL LENGTH, 40 FOOT TOTAL DROP, SINGLE INNER TUBE RIDE S/N: 7275-AA52-AB46

WHITEWATER WEST INDUSTRIES SLIDE ATTRACTION WITH (6) SLIDES INCLUDING "B" AND "C" TOWERS, APPROXIMATELY 60 FOOT TALL TOWERS, APPROXIMATE FOOTPRINT OF ATTRACTION IS 18,250 SQUARE FEET (1,700 SQUARE METERS) WITH AN IRREGULAR FOOTPRINT. ATTRACTION INCLUDES (2) TOWER STRUCTURES WITH STAIRS, ALL BRACING ELEMENTS, ENTRY BOXES, FIBERGLASS SLIDE SECTIONS, JOINT ASSEMBLIES, BULLET FLUMES, SLIDES AS FOLLOWS: SLIDE BA- "BEAST OF THE EAST", LR STYLE SLIDE FOR A FIVE PERSON RAFT EXPERIENCE, WITH RAFT CONVEYOR, TOTAL LENGTH 560.5 FEET, 57.8 FOOT TOTAL DROP, RUNS FROM C TOWER TOP DECK TO POOL LEVEL; SLIDE BB- "TERMINATOR", SPEED DROP POOL SLIDER STYLE SLIDE, TOTAL LENGTH 159.6 FEET, TOTAL DROP 19.6 FEET, SLIDE BEGINS AT TOP OF C TOWER AND ENDS AT TOP OF B TOWER; SLIDE BC- "SPEED DOMINATOR", SPEED DROP POOL SLIDER STYLE SLIDE, TOTAL LENGTH 161.9 FEET, TOTAL DROP 19.6 FEET, SLIDE BEGINS AT TOP OF B TOWER AND ENDS MID LEVEL C TOWER; SLIDE BD- "ABYSS", SPEED DROP POOL SLIDER STYLE SLIDE, TOTAL LENGTH 161.2 FEET, TOTAL DROP 19.6 FEET, SLIDE BEGINS AT LOWER LEVEL OF C TOWER AND ENDS AT GROUND LEVEL; SLIDE BE- "CREMATOR", SPEED DROP GIANT SLIDE STYLE, TOTAL LENGTH 355.2 FEET, TOTAL DROP 39.4 FEET, SLIDE BEGINS AT THE MID LEVEL OF C TOWER AND ENDS AT GROUND LEVEL; SLIDE BF- "FREE FALLS", 32 INCH SPEED SLIDE, TOTAL LENGTH 132.5 FEET, TOTAL DROP 19.5 FEET, SLIDE BEGINS ON THE LOWER LEVEL OF B TOWER AND ENDS AT GROUND LEVEL. LANDING POOL REQUIRED AT NEW LOCATION.

SQUARE D MODEL 6 MOTOR CONTROL CENTER, 500 KVA, 480/120-208 V, 1600 A, BREAKERS, TRANSFORMER

"DINO-DIG" DINOSAUR BONE EXCAVATION ATTRACTION, INCLUDING DINOSAUR BONE REPLICA EXHIBIT ENTRANCE PROPS, VARIOUS "BONES" FOR BURIAL AND DISCOVERY. THESE "BONES" GET BURIED IN A LARGE SANDBOX FOR EXCAVATION AND DISCOVERY BY JR. PALEONTOLOGIST GUESTS.

(6) ZEBEC FAMILY RAFTS, 7 FEET WIDE FOR "C" TOWER FIVE PERSON SLIDE "BEAST OF THE EAST", YELLOW, GREY - MADE IN USA

ARCTIC WALK-IN COOLER/ WITH FREEZER SECTION, OVERALL 14'X8'X90H, FREEZER 5'X8', R404A REFRIGERANT, VOLTAGE: 115 VOLTS, PHASE: SINGLE, HERTZ: 60, DEFROST TYPE: ELECTRIC, TEMPERATURE RANGE: BOX TEMP = -10F, DIMENSIONS: APPROXIMATELY 7 FT X 10 FT, UL LISTED S/N: 24224

PLASTICADE SIGNICADE DELUXE A-FRAME SIGN STAND, PLASTIC, WHITE, DOUBLE-SIDED, PORTABLE, FOLDABLE, WEATHER-RESISTANT, 24 INCH W X 36 INCH H SIGN PANEL

MANITOWOC KDT0400W-161 ICE MAKER MACHINE, 1000 LBS PRODUCTION WITH STORAGE BIN S/N: 1120863701

BANNER ENGINEERING QS18VN6LV PHOTOELECTRIC SENSOR, CE CERTIFIED, NPN OUTPUT CONFIGURATION, 10-30 V DC POWER SUPPLY VOLTAGE, DIFFUSE SENSING MODE WITH 100 MM (4 IN) RANGE, RESPONSE TIME OF 1 MS, OPERATING TEMPERATURE RANGE -40 TO 70AC (-40 TO 158AF), CABLE WITH QUICK DISCONNECT CONNECTION.

(2) WEG 25 HP MOTORS, FRAME -284 WITH GUARDIAN STRAINERS/ NEPTUNE-BENSON INDUSTRIAL WATER PUMP SYSTEM

(5) UTILITECH HIGH-VELOCITY AIR MOVER, 1/4 HP MOTOR, 120V, 60 HZ, 2.1 A, 3 SPEED SETTINGS, 900 CFM AIRFLOW, 10-FOOT CORD LENGTH, DIMENSIONS 16 X 15 X 15 INCHES, WEIGHT 12 LBS, PLASTIC MATERIAL

LARGE LOT CORDLESS TOOLS: DEWALT CORDLESS DRILL/DRIVER SET, INCLUDES MODELS DW959, DW960, DCF840, DC790, DCD703, DCD701, BATTERY POWERED, VOLTAGE 12V AND 20V, CHUCK SIZES 1/2 INCH, 3/8 INCH, 1/4 INCH, SPEED 0-1200 RPM AND 0-425/0-1500 RPM, WITH DRILL BITS AND ADDITIONAL TOOLS S/N: DW960-87108.

SIMPSON PS60982 GAS PRESSURE WASHER, 3400 PSI, 2.5 GPM, HONDA GX200 ENGINE, OEM TECHNOLOGIES AXIAL CAM PUMP, 50 FT HOSE, 5 QUICK CONNECT NOZZLES (0A, 15A, 25A, 40A, SOAP), DIMENSIONS 34 X 20 X 24 INCHES, WEIGHT 66 LBS S/N: 02233026379

DEWALT D55146 PORTABLE AIR COMPRESSOR, 225 PSI, 4.5 GALLON, 5.0 SCFM, 1.6 HP, 120V, ELECTRIC, WHEELED AND PORTABLE, QUICK RECOVERY.

DEWALT DWS780 SLIDING COMPOUND MITER SAW, 12-INCH BLADE, 15-AMP MOTOR, 3800 RPM, 120V, 49A BEVEL CAPACITY LEFT AND RIGHT, APPROXIMATE WEIGHT 56 LBS, DIMENSIONS 21.5 X 17.7 X 17.1 INCHES, 16-INCH CUTTING CAPACITY AT 90 DEGREES, LED LIGHT, DUST COLLECTION SYSTEM S/N: 35095

(3) UTILITECH & B-AIR VP-25 AIR MOVER BLOWER FANS, 1/4 HP, BLUE

DEWALT D55146 AIR COMPRESSOR, 4.5 GALLON TANK, MAXIMUM PRESSURE 225 PSI, AIR DELIVERY 5.0 CFM AT 90 PSI, 1.6 HP MOTOR, ELECTRIC POWER SOURCE, 120V, DIMENSIONS 33.5 X 23 X 15 INCHES (85 X 58 X 38 CM), WEIGHT 83 LBS (37.6 KG), NOISE LEVEL 78 DB

ALLEN-BRADLEY POWERFLEX 525 ELECTRICAL CONTROL PANEL WITH DRIVES

LOT ELECTRONICS, AMP, VCR, ETC.

LINCOLN ELECTRIC WELD-PAK 125 HD MIG WELDER, 30-125 A OUTPUT, 120 V POWER INPUT, 20% DUTY CYCLE AT 90 A, DIMENSIONS 18 X 10.15 X 16.75 INCHES (45.7 X 25.8 X 42.5 CM), WEIGHT 45 LBS (20.4 KG), ADJUSTABLE WIRE FEED SPEED, COLD CONTACTOR SAFETY FEATURE.

PREDATOR 212CC WATER PUMP, 2-INCH NPT INLET, 4-STROKE OHV ENGINE, GASOLINE, FUEL TANK CAPACITY APPROXIMATELY 0.9 GALLONS, MAXIMUM FLOW RATE APPROXIMATELY 158 GPM, DIMENSIONS APPROXIMATELY 19.6 X 15 X 17.5 INCHES, WEIGHT APPROXIMATELY 55 POUNDS, NON-COLLAPSIBLE (RIGID) SUCTION HOSE REQUIRED. S/N: 996706-10/ME1100155182/570 T81E0024090132927

CRAFTSMAN TOOL CHEST WITH TOOLS, RED, 5 DRAWERS, METAL CONSTRUCTION, INCLUDES VARIOUS SOCKETS, WRENCHES, SCREWDRIVERS, AND MORE. DIMENSIONS APPROXIMATELY 40 X 26 X 18 INCHES (101.6 X 66 X 45.7 CM), ESTIMATED WEIGHT 80 LBS (36.3 KG).

LOT OF AIR AND POWER TOOLS INCLUDING KOBALT AIR AND POWER TOOLS SET, 24V BATTERY, BATTERY AND AIR POWER SOURCE, AIR HOSE, CHARGER, CARRYING CASE

METAL STORAGE CABINET, 60X24X60 HIGH WITH CONTENTS PAINTS ETC

CENTRAL S-987 BENCH DRILL PRESS, 1/2 INCH CHUCK, 5-SPEED (620, 1100, 1720, 2340, 3100 RPM), ELECTRIC POWER, 1/3 HP MOTOR, 2 INCH SPINDLE TRAVEL, 7 X 7 INCH TABLE, 120V, 60HZ S/N: 94121218

DEWALT DXV12P-QT WET/DRY VACUUM, 12 GALLON CAPACITY, 120V, 60HZ, 8A, 50% QUIETER OPERATION, STEALTHSONIC TECHNOLOGY, WHEELS FOR MOBILITY S/N: 0524

METAL HARDWARE STORAGE CABINETS WITH ASSORTED FASTENERS, FEATURING 24 COMPARTMENTS, VARIOUS SIZES OF BOLTS, NUTS, SCREWS, AND FASTENERS INCLUDED, GRAY COLOR, LABEL SLOTS ON DRAWERS.

LOT OF PVC PIPE FITTINGS ASSORTMENT, VARIOUS TYPES, WHITE

DEWALT DWX723 HEAVY DUTY MITER SAW STAND, ALUMINUM CONSTRUCTION, FOLDED DIMENSIONS 72 INCHES (182.9 CM), EXTENDED DIMENSIONS 150 INCHES (381 CM), UNIVERSAL COMPATIBILITY WITH ALL MITER SAW BRANDS, LIGHTWEIGHT AT 35 LBS (15.9 KG), 500 LBS CAPACITY, YELLOW AND SILVER COLOR.

ASSORTED TOOLS AND RED HUSKY TOOL STORAGE, INCLUDES WRENCHES, SCREWDRIVERS, SOCKETS, PLIERS, HAMMERS, TOOL BAGS, PEGBOARD FOR TOOLS.

LOT OF EXTENSION CORDS, PAINT HOSE, AIR HOSE, PRESSURE WASHING WANDS

BOSTITCH N88WWB CLIPPED HEAD FRAMING NAILER & SB-1664FN 16GA BRAD NAILER, PNEUMATIC POWER SOURCE, FASTENER RANGE FOR BRAD NAILER 1-2-1/2 INCH, INDUSTRIAL HIGH POWER, ERGONOMIC DESIGN.

(4) XPOWER P-230AT-BLUE AIR MOVER, 1/4 HP, 115V, 2.3A, 3-SPEED, 10.7 IN X 12.4 IN X 13.3 IN (27.2 CM X 31.5 CM X 33.8 CM), 10 FT (3.05 M) POWER CORD, BUILT-IN POWER OUTLETS FOR DAISY-CHAINING.

SHERWIN-WILLIAMS SUPERPAINT PRO, VARIOUS COLORS & SIZES, INTERIOR/EXTERIOR USE

(12) SPRAY CANNONS

LOT (2) BOSCH BULLDOG XTREME ROTARY HAMMER DRILL, SDS-PLUS, 120V, 7.5A, MAX RPM 1,300, IMPACT ENERGY 2.0 FT-LBS (2.7 J), WEIGHT 6.9 LBS (3.1 KG), VARIABLE SPEED, VIBRATION CONTROL, VARIOUS DRILL BITS INCLUDED, CASE INCLUDED.

HAYWARD POOL PUMP MOTOR PAPPP100, 1.0 HP, VOLTAGE 115/230V, AMPERAGE 6.8/13.6 A, SERVICE FACTOR 1.00, FRAME TYPE 56J, SINGLE-SPEED MOTOR, RPM 3450, DIMENSIONS 23 X 10 X 9 INCHES S/N: 21122406003594059

LOT OF (3) NAILERS: HITACHI NT65M2(S) & PORTER-CABLE FN250B PNEUMATIC FINISH NAILERS

DEWALT DWE575 CIRCULAR SAW, 7-1/4 INCH BLADE, 5200 RPM, 57A BEVEL CAPACITY; MAKITA 5007MG CIRCULAR SAW, 7-1/4 INCH BLADE, 5800 RPM, 56A BEVEL CAPACITY. POWER SOURCE: CORDED ELECTRIC, VOLTAGE: 120 V, AMPERAGE: 15 A. DEWALT S/N: W0K8MFX

HITACHI G13SR & G18SR DISC GRINDER/POLISHER, 120V, 5A, 6,000 RPM, 7 INCH DISC SIZE, MADE IN MALAYSIA, WEIGHT APPROX. 4.4 LBS (2 KG), DIMENSIONS APPROX. 15 X 6 X 5 INCHES (38 X 15 X 13 CM), CORD LENGTH APPROX. 8 FT (2.4 M)

(10) WOODEN BARSTOOLS

(4) XPOWER P-230AT-BLUE AIR MOVER, 115V, 60HZ, 1/4 HP, 2.3A, 3 SPEED SETTINGS, THERMAL PROTECTED, STACKABLE DESIGN, LOW POWER DRAW, CORD LENGTH 10 FT (3.05 M), DIMENSIONS 10.7 X 12.4 X 13.3 IN (27.2 X 31.5 X 33.8 CM), WEIGHT 9.3 LBS (4.2 KG).

(3) XPOWER P-230AT-BLUE AIR MOVER, 115V, 1/4 HP, 800 CFM, 3-SPEED, 115W, 3-SPEED SETTINGS, 10 FT CORD LENGTH, 10.2 LBS WEIGHT, DIMENSIONS 10.7 X 12.4 X 13.3 INCHES, AMPERAGE 2.3A, STACKABLE DESIGN, BUILT-IN POWER OUTLETS FOR DAISY CHAINING.

LOT OF POWER CORDED AND CORDLESS POWER TOOLS

KOBALT 7-INCH WET TABLETOP TILE SAW, MODEL KWS-B7-20, 3450 RPM, ELECTRIC POWER SOURCE, 120V, 5A, 3/4 HP MOTOR, DIMENSIONS 26 X 18 X 8 INCHES, WEIGHING 20 LBS, WITH CAPABILITIES FOR CUTTING TILE AND STONE S/N: KWSB72011041

MAINTENANCE SHOP ITEMS, SUMP PUMP, PARTS CLEANER, TOOLS, PARTS, GROMMETS

CENTRAL MACHINERY 14 INCH WOOD CUTTING BAND SAW, 1 HP MOTOR, 110/220V POWER COMPATIBILITY, THROAT CAPACITY APPROXIMATELY 13.5 INCHES, MAXIMUM CUTTING HEIGHT APPROXIMATELY 6 INCHES, BLADE LENGTH TYPICALLY 93.5 INCHES, TABLE SIZE APPROXIMATELY 14 X 14 INCHES, COLOR GREEN S/N: T5803/7146

BISSELL BG697 COMMERCIAL FLOOR SWEEPER, 31-INCH CLEANING PATH WIDTH, MANUAL POWER SOURCE, DUAL ROTATING BRUSHES, ERGONOMIC HANDLE, DIMENSIONS 44 X 30.5 X 41 INCHES (112 X 77.5 X 104 CM), WEIGHT 35 LBS (15.88 KG), CAPACITY OF 13.2 GALLONS (50 LITERS).

2.5 TON PALLET JACK, ORANGE, METAL CONSTRUCTION, LOAD CAPACITY: 5500 LBS, FORK LENGTH: 48 INCHES, FORK WIDTH: 27 INCHES, WHEEL MATERIAL: POLYURETHANE, OVERALL DIMENSIONS: 60 X 27 X 48 INCHES, HANDLE TYPE: STANDARD