Ogden Nutra Manufacturing Packaging Equipment Multiple Locations

FOGG FSC FREE STANDING 5 HEAD CAPPER PICK & PLACE CONTROL PANEL S/N: 855-2-4-12 FEATURES: UNIT HAS NEVER BEEN USED, STILL CRATED FOGG MODEL FSC FREE STANDING CAPPER: STAINLESS STEEL BASE ELECTRIC CAPPER RAISING AND LOWERING TIMING SCREW INFEED STARWHEEL AND INFEED SCREW CLUTCHES ELECTRICAL PANEL STAINLESS STEEL CONSTRUCTION NEMA 4 (WATERPROOF) STANDARDS ON/OFF SWITCHES, EMERGENCY STOP BUTTON VARIABLE SPEED MOTOR CONTROL FOGG CAP IN HEAD (PICK & PLACE) CAPPER: MEDIUM TO HIGH SPEED CAPPING. ADJUSTABLE TORQUE MAGNETIC CAPPING HEADS PRECISION LUBE FREE SPINDLE ASSEMBLIES QUICK CHANGE TOOL LESS CHANGEOVER NO BOTTLE - NO CAP SENSOR ELECTRICAL TURRET HEIGHT ADJUSTMENT WITH POSITIONING VARIABLE SPINDLE SPEED CONTROL LEFT HAND CONFIGURATION CAP CHUTE, CAP SUPPLY DETECTOR NEMA 4 ELECTRICAL STANDARDS COMPLETE OPERATOR/MAINTENANCE/PARTS MANUAL Z-24 VARIABLE SPEED SORTER WITH EASI-DUMP EASI-DUMP CAP HOPPER EQUIPPED WITH FUNNEL AND BAG ALLOWING FOR QUICKER CAP CHANGEOVER VARIABLE SPEED 3 PHASE DRIVE FOR MAXIMUM EFFICIENCY VOLUME CHAMBER CAP ON DEMAND EYE (SIGNAL TO CYCLE SORTER ON AS CAPS ARE REQUIRED OR OFF AS THEY BACK-UP IN CAP VOLUME CHAMBER) SORTER SPEED CONTROLLED FROM TOUCH SCREEN ROTARY SORTER IS ELECTRICALLY DRIVEN, USES NO AIR, NO VIBRATION LARGE CAPACITY CLEAR HOPPER ALL STAINLESS CHUTE, STAND, AND CAP PICK UP OPERATOR CAN VIEW CAP LEVEL 3 SETS OF CHANGE PARTS BUILT FOR A 38MM SCREW ON LID 200 BOTTLES PER MINUTE ADDITIONAL DETAILS INLINE OR ROTARY:ROTARY NUMBER OF CAPPING HEADS:5 CAP TYPE:PET OUTPUT:200 CAPS PER MINUTE CAP SHAPE:ROUND CURRENT CAP SIZE:38 MILLIMETERS VOLTAGE:208 VOLTAGE:240 ELECTRICAL PHASE:3 PH HERTZ:60HZ DIMENSIONS: 135"X81"X110" CONTROL PANEL DIMENSIONS: 74"X94"X19"

2013 KALLFASS SUPER WRAPPER 950 DELUXE IN-LINE AND HEAT TUNNEL MACHINE #: VD0513706 MFG. DATE: 2013 PHASE: 3 VOLTS: 480 HZ: 60 DIMENSIONS: 75"X64"X77" HEAT TUNNEL MODEL: UNIVERSAL 950 HV S/N:48 MFG. DATE: 2013 PHASE: 3 VOLTS: 480 HZ: 60 TUNNEL OPENING: 37"X21" OVERALL DIMENSIONS: 120"X73"X68" GENERAL INFO: PNEUMATIC AND ELECTRO-MECHANIC SLEEVE WRAPPERS, IN-LINE OR WITH ANGLE FEED. KALLFASS BUNDLERS ARE DESIGNED FOR SMALL TO LARGE AND HEAVY PRODUCTS. THESE MACHINES CAN OPERATE IN A WIDE VARIETY OF APPLICATIONS WHILE PERFORMING WITH RELIABILITY AND SPEED. KALLFASS BUNDLERS ALSO OPERATE WITH MINIMAL ERROR AND MAXIMUM AVAILABILITY WHICH INSURES THE SUCCESS OF THE WHOLE PRODUCTION LINE. WHEN COMBINED WITH A KALLFASS SHRINK TUNNEL, THESE BUNDLERS HAVE THE CAPABILITY OF ACHIEVING FULLY ENCLOSED WRAPPING WHILE MAXIMIZING FILM SAVINGS. ALL BUNDLERS ARE DESIGNED FOR USE IN 3 SHIFT OPERATIONS. APPLICATIONS INCLUDE BUILDING MATERIAL PRODUCTS, BOXED FOOD PRODUCTS AND MANY MORE. FEATURES: THE ROBUST SYSTEM ALSO FOR HEAVY APPLICATIONS HIGH LEVEL OF AVAILABILITY FULL-WRAP PACKAGING IN COMBINATION WITH SHRINK TUNNEL HV TECHNOLOGY IS ALSO POSSIBLE EXTREMELY RELIABLE TECHNOLOGY CHAOTIC INCOMING PRODUCTS ARE RELIABLY PACKED SMALL FOOTPRINT EASY HANDLING AND MAINTENANCE-FREE TO A LARGE EXTENT

2013 APPS INC. R-12K LANE COUNTER VOLTS: 115 HZ: 60 AMPS: 15 AIR: 80 PSI LANES: 12 DIMENSIONS: 45"X48"X79" FEATURES: TWELVE LANE, LASER COUNTING SYSTEM LARGE 2400 CUBIC-INCH CAPACITY HOPPER AUTOMATIC FEED CONTROL PURGE MODE WITH BULK COUNTING CAPABILITY SMOOTH, PUSH-BUTTON HEIGHT ADJUSTMENT BUILT IN DUST EXTRACTION STORE RECIPES AND BATCH LOGS EXTRA LARGE TABLET CHUTES PREVENT JAM-UPS EASY TO CLEAN NO PLACE FOR STRAY TABLETS TO HIDE CASTERS STAINLESS STEEL CONSTRUCTION GMP DESIGN UTILITIES VOLTAGE: 120 VOLTS, 60 HZ, 15 AMPS AIR: 80 PSI @ 1 CFM S/N: STF12-006

JBT FOODTECH MIXING TANK WITH SERVO DRIVEN BLADE 350 GALLON DEPTH: 48" DIAMETER: 48" JACKETED TANK OUTLET: 4" BUTTERFLY VALVE DIMENSIONS: 108"X108"

2005 NORDENMATIC 250 TUBE FILLER TYPE: NM250HA S/N: 54180 14 STATION DIMENSIONS: 45"X44"X77" GENERAL INFO: THE NORDENMATIC 250 IS A FIXED SPEED TUBE FILLING AND SEALING MACHINE SUITABLE FOR OUTPUTS OF 25 TUBES PER MINUTE. IT IS DESIGNED FOR FILLING AND SEALING, PLASTIC, PLASTIC-LAMINATE AND ALUMINUM LAMINATE TUBES OF UP TO 50 MM DIAMETER AND WITH A MAXIMUM FILLING VOLUME OF 300 ML. THE MACHINE IS DESIGNED FOR MANUAL INFEED OF TUBES BUT WILL AUTOMATICALLY FILL AND SEAL THE TUBES. TUBE CODING IN THE SEAL AREA AND TUBE TRIMMING ARE ALSO AUTOMATIC OPERATIONS PERFORMED PRIOR TO TUBE DISCHARGE. THE VOLUMETRIC FILLING PUMP, WITH A WELL PROVEN FILLING ACCURACY, AND NORDEN'S PATENTED HOT AIR SEALING SYSTEM ARE OF THE SAME STANDARD AS ALL OTHER LARGER NORDEN MODELS. THE MACHINE IS MAINLY MECHANICALLY AND, THEREFORE, EASY TO UNDERSTAND AND MAINTAIN. ALTHOUGH SIMPLIFIED THE NM 250 IS DESIGNED WITH THE SOPHISTICATION GAINED FROM DECADES OF EXPERIENCE THAT HAS SECURED A LEADING POSITION FOR NORDEN IN THE PACKAGING INDUSTRY. FEATURES: - PRODUCTION CAPACITY: 25 TPM - FILLING VOLUME: 1-300 ML - TUBE LENGTH(STD): 50-200 MM - TUBE LENGTH(OPT): 100-250 MM - TUBE DIAMETER: 10-50 MM - INFEED SYSTEM: MANUAL INFEED

2002 LEE 250U5S JACKETED MIXING TANK 250 GAL WITH SWEEP AND AGITATION STEAM JACKET CAPACITY: 250 GAL S/N: 24615-1 MAWP JACKET: 100 PSI @ 338 F SERVO DRIVEN MOTOR STEAM JACKET

2018 LOMA SYSTEMS CW3 COMBINATION SYSTEM IQ3+E METAL DETECTOR S/N: QEU15C35-42710D VOLTS: 110/240 PHASE: 1 HZ: 50/60 AMPS: 0.3-0.6 APERTURE OPENING: 12 3/4"X5 5/8" BELT WIDTH: 4" OVERALL DIMENSIONS: 72"X53"X66" GENERAL INFO: LOMAS INTEGRATED COMBINATION SYSTEMS ARE THE IDEAL WAY TO INSPECT AND WEIGH ALL IN ONE MACHINE, WITH THE OPTION OF A SYSTEM COMBINING EITHER METAL DETECTION OR X-RAY INSPECTION CAPABILITIES ALONG WITH DYNAMIC CHECKWEIGHING. COMBINATION SYSTEMS NOT ONLY PROVIDE SEVERAL KEY QUALITY AND EFFICIENCY BENEFITS, BUT AS THERE IS ONLY ONE SUPPLIER, THIS SIMPLIFIES LINE MANAGEMENT FROM THE INITIAL INSTALLATION, TO SOURCING OF SPARE PARTS, TO FUTURE SERVICING REQUIREMENTS. THE ABILITY TO SAVE SPACE IS ALSO AN ADVANTAGE FOR A FACTORY WHERE ROOM IS A PREMIUM, AS COMBINING THE FUNCTIONS CAN HELP SAVE UP TO AROUND 25% WITH THIS COMBINATION SYSTEMS FOOTPRINT VERSUS THE EQUIVALENT IF TWO SEPARATE MACHINES WERE TO BE INSTALLED. WITH COMBINATION SYSTEMS BEING ABLE TO CHECK THE PRODUCTS WEIGHT, THEY ARE PERFECT FOR CHECKING FOOD IN ITS FINISHED FORM, SUCH AS PACKAGED FOOD TO GO AND CONVENIENCE FOODS THAT IS ABOUT TO BE SHIPPED TO THE RETAILER. WITH A COMBINATION SYSTEM, CUSTOMERS HAVE THE REASSURANCE OF A ROBUST CRITICAL CONTROL POINT (CCP), AS IT IS DESIGNED TO HIGHLIGHT ANY DETECTION AND WEIGHT ISSUES, HELPING IMPROVE QUALITY OF PRODUCTION OUTPUT AND SIMPLIFYING PROCESSES. IDEAL FOR: CONVENIENCE FOOD | FOOD-TO-GO MEAT, POULTRY & FISH BAKERY CONFECTIONERY & SNACK FOODS DAIRY AND EGG PRODUCTS FRUIT, VEGETABLES & NUTS DRIED FOODS, CEREALS & GRAINS OTHER / GENERAL INDUSTRIES

R321 UNIVERSAL LABELER WRAP STATION SERIAL NUMBER: 384-127-5-50R-1844 VAC: 220 HERTZ: 50/60 AMPS: 0.5 BELT WIDTH: 7.5" MAXIMUM LABEL WIDTH: 8" LABELER HAS 3 PARTS: 1. ROLLER INDEXING CONVEYOR 2. LABELING HEAD SL-1500 3. WRAP STATION GENERAL INFO: THE R321 ROUND-BOTTLE LABELER INCLUDES A HEAVY-DUTY FRAME, A PRODUCT-METERING WHEEL, A PHOTOELECTRIC PRODUCT SENSOR, A 15-IN. LABEL-WRAPPING STATION, AND UNI-FLEX LABEL-WRAP BACKING PLATE. THE SL1500 LABEL APPLICATOR FEATURES A 1,500-IN./MIN LABEL DISPENSING SPEED, WITH A LABEL ROLL CAPACITY OF UP TO 12-IN. OD, APPLICATOR CONTROL SECURITY AND PASSWORD PROTECTION.

SIEMENS B83R012PSYD REVERSE OSMOSIS WATER SYSTEM S/N: 065121-01 PHASE: 3 VOLTS: 460 HZ: 60 FLA: 29 HP: 20 DIMENSIONS: 172" X 74" X 34" VANTAGETM SERIES PACKAGED SINGLE-PASS 8-INCH REVERSE OSMOSIS SYSTEMS ARE DESIGNED FOR A VARIETY OF INDUSTRIAL WATER APPLICATIONS REQUIRING HIGH QUALITY EQUIPMENT WITH A FAST DELIVERY AND COMPETITIVE PRICE. THE VANTAGETM SERIES PACKAGED SINGLE-PASS REVERSE OSMOSIS SYSTEM IS DESIGNED FOR A VARIETY OF INDUSTRIAL WATER APPLICATIONS REQUIRING HIGH QUALITY EQUIPMENT WITH A FAST DELIVERY AND COMPETITIVE PRICE. THESE PRE-ENGINEERED, PRE-ASSEMBLED AND FACTORY TESTED UNITS MINIMIZE INSTALLATION AND START-UP TIME. WITH SIMPLE UTILITY CONNECTIONS AND EASY TO SET UP CONTROLS, THE UNIT IS READY FOR QUICK ON-LINE SERVICE. THE VANTAGETM M83 COMES IN THREE CONFIGURATIONS: THE ECONOMY (E), THE PLUS (P) AND THE DELUXE (D). ECONOMY (M83E) - CONTROLLED BY MICROPROCESSOR PLUS (M83P) - CONTROLLED BY EVOQUA PLC AND USER FRIENDLY TOUCH SCREEN HUMAN MACHINE INTERFACE (HMI) DELUXE (M83D) - M83P CONTROLS PLUS VARIABLE FREQUENCY DRIVE (VFD) FOR FLOW CONTROL AND CLEAN IN PLACE (CIP) FUNCTION BENEFITS COMPACT FOOTPRINT SAVES VALUABLE FLOOR SPACE QUICK EQUIPMENT DELIVERY KEEPS PROJECT MOVING FAST CLEAN IN PLACE CONNECTIONS MAXIMIZE SYSTEM SERVICEABILITY COMPREHENSIVE FACTORY TESTING PERFORMED AT OUR ISO9001 CERTIFIED FACTORY

CUSTOM CSB 2460R 30 CUBIC FOOT RIBBON BLENDER WITH BUILT IN SCALE MEASUREMENTS: 65"X29"X30" 1.5" BOTTOM PORT DIMENSIONS: 48" X 100" X 68" S/N: 84002

UNIVERSAL SL1500 HIGH PERFORMANCE STEPPER MOTOR DIGITAL CONTROL PACKAGE MULTI-LEVEL MENU LABEL DISPENSE SPEED UP TO: 1500 IPM WEB CAPACITY: 6.25 PHOTOELECTRIC LABEL SENSOR 12 DIAMETER LABEL SUPPLY, 3 I.D. CORE ADJUSTABLE PEELER BAR ASSEMBLY DIMENSIONS: 19.63W X 20D X 30.5H SPEED: UP TO 1500 IPM WEB WIDTH: UP TO 6.375 LABEL ROLL CAPACITY: UP TO 12OD ELECTRIC: 120 VAC AIR FOR TAMP VERSION: 40 PSI/80 PSI BLOW-ON DIMENSIONS: 58" X 78" X 66"

KAPS-ALL F4 CAPPER MODEL: F4 S/N: 3950 DIMENSIONS: 34"X38"X68" GENERAL INFO: FULLY AUTOMATIC CAP TIGHTENING / RETORQUEING MACHINE REQUIRES ONLY 32" OF LINE SPACE. IDEAL FOR PUMP & TRIGGER CAP TIGHTENING AND RETOURQUING AFTER HEAT INDUCTION SEALING. PORTABILITY ALLOWS VERSATILITY FOR AUTOMATIC CAPPING; EASILY MOVED FROM ONE PRODUCTION LINE TO ANOTHER. HANDLES METAL, GLASS, OR PLASTIC CONTAINERS FROM LOW JARS AND VIALS UP TO 2-1/2 GALLONS. FEATURES: CALIBRATED SETTINGS ALLOW FOR EASE AND REPEATABILITY OF CHANGEOVERS. STAINLESS STEEL GUARDING OF UPPER DRIVE SECTION. ONE PAIR OF STAINLESS STEEL BOTTLE GRIPPER BELT HOUSINGS COMPLETE WITH BELTS AND DRIVES. ALL STAINLESS STEEL BOTTLE GRIPPER BELT AND SPINDLE SHAFTING. HEAVY DUTY PATENTED MULTIPLE DISC ADJUSTABLE TORQUE CLUTCHES WHICH WILL GIVE A CONSISTENT TORQUE AND MINIMIZE WEAR ON CAP TIGHTENING DISCS (TWO PAIR). ALL ELECTRONICALLY CONTROLLED VARIABLE SPEED DRIVES FOR EASE OF ADJUSTMENTS. ALL NEMA 12 ELECTRICAL COMPONENTS. PORTABLE ON FOUR SWIVEL WHEELS FOR EASY MANEUVERING.

LABEL-AIRE 6115 WITH ORIENTING WRAP LABELING SYSTEM S/N: 0257400411 4.5" X6' CONVEYOR DIMENSIONS: 84" X 56" X 65" GENERAL INFO: LABEL-AIRES SOLUTION WAS TO CONFIGURE ITS VERSATILE INLINE SERIES 6000 LABELING SYSTEM WITH THE RELIABLE 3115 WIPE-ON APPLICATOR AND A CUSTOM PRODUCT ORIENTING WRAP SYSTEM. THE RESULT WAS THE MODEL 6115 WITH ORIENTING WRAP LABELING SYSTEM WHICH EASILY AND ACCURATELY APPLIES CLEAR DECORATIVE TAMPER-EVIDENT LABELS AT THE SAME LOCATION ON THE CUSTOMERS CYLINDRICAL PUMP BOTTLE. AS THE RANDOMLY-FED BOTTLES APPROACH THE POINT OF LABEL APPLICATION, A CAPTURE ROLLER HOLDS AND SPINS EACH BOTTLE IN PLACE. A COMBINATION OF SENSORS AND SOFTWARE DETERMINES THE PRECISE LOCATION OF LABEL APPLICATION ENSURING THAT THE LABELS TAMPER-EVIDENT PORTION IS PLACED AT THE SAME LOCATION OF THE BOTTLE EVERY TIME (+/- 1/32). THE 6115 WITH ORIENTING WRAP LABELING SYSTEM EASILY SATISFIES THE CUSTOMERS LABELING REQUIREMENTS RESULTING IN AN ATTRACTIVELY-LABELED BOTTLE WITH A SECURITY TAB PLACED PRECISELY WHERE THE CUSTOMER WANTS IT. ALSO INCLUDES: USED LABEL-AIRE LABELER MODEL: 3115- 1500 RH4 SERIAL NUMBER: 0257180411 VOLTS: 120 HERTZ: 60 AMPS: 5 PHASE: 1

UNIVERSAL LABELING SYSTEMS SL-2000 RIGHT HAND LABELER MODEL: SL-2000 RIGHT HAND LABELER S/N: 384-059-I-40-721 INPUT: 110-AC SINGLE PHASE 50/60 HERTZ AMPS: 5 MAX LABEL WEB: 9.5" TA4 WRAP UNIT S/N: TA4-1003-15-L-1333 INPUT: VOLTS: 90 HERTZ: 60 AMPS: 2 DIMENSIONS: 112" X 65" X 70"

AESUS HYBRID TUNNEL 48" DIMENSIONS: 68" X 53" X 76" TUNNEL OPENING: 13" X 8.5" S/N: 517970715 VAC: 208 PHASE: 3 HERTZ: 60 AMPS: 60 DIMENSIONS: 68" X 53" X 76" TUNNEL OPENING: 13" X 8.5" GENERAL INFO: COMBINATION STEAM AND ELECTRIC SHRINK TUNNEL (PATENTED) FOR DIFFICULT, VERY PRECISE, AND OR WIDELY CONTOURED CONTAINERS. STEAM, DELIVERS A BETTER SHRINK THAN PURE ELECTRIC. THE ADDITION OF A SMALL STEAM GENERATOR AND SPECIALLY DESIGNED STEAM TUBES TO OUR INFRA RED TUNNEL GIVES THIS BETTER SHRINK BUT AT AN AFFORDABLE PRICE. 48 INCH TUNNEL HAS DUAL ZONES FOR BOTH THE INFRA RED HEATERS AND THE STEAM TUBES TO ENABLE GENTLE EVEN SHRINK AT THE ENTRANCE TO THE TUNNEL AND TO FINISH WITH A HOTTER EXIT. THE FURTHER ADVANTAGE TO THE COMBINATION HYBRID TUNNEL IS THAT ONLY A LITTLE STEAM IS USED AND SO THE PROCESS IS MUCH DRIER THAN IT WOULD BE WITH A STEAM ONLY TUNNEL AND ALSO THE SHRINKING IS COMPLETED IN MUCH LESS SPACE THAN CONVENTIONAL TUNNELS.

NJM AUTO-COLT 326SLWPIII LABELER VOLTS: 110 PHASE: 1 CYCLES: 60 FULL LOAD: 15 A S/N: 318SL-203 / M99J0102 DIMENSIONS: 100" X 72" X 80" CONVEYOR WIDTH: 5"

2003 ISHIDA DACS- W- 012- SB/ PB-1 CHECKWEIGHERWITH PNEUMATIC KICK WEIGHING CAPACITY: 1.2K S/N: 53301 VOLTS: 120 AMPS: 3.5 HERTZ: 60 DIMENSIONS: 51" X 29" 56" BELT WIDTH: 8" GENERAL INFO: THIS CHECKWEIGHER COMBINES VERSATILITY AND FLEXIBILITY WITH EVEN GREATER ACCURACY AND HIGHER SPEEDS. IT CAN WEIGH PRODUCTS OF UP TO 1,200G AND CAN ACHIEVE A MAXIMUM SPEED OF 270 PACKS/MIN. FEATURES: WEIGHING RANGE: 10 GRAMS TO 1.2 KILOGRAMS CONVEYOR SPEED: UP TO 312 FEET PER MINUTE, DEPENDING ON APPLICATION ACCURACY: +/- .2 GRAMS CONVEYOR WIDTH: 8 INCHES REQUIRES NEW CONVEYOR SECTIONS SCREW DOWN LEVELING FEET STAINLESS STEEL FRAME

MODULAR KING 8 LANE TABLET/CAPSULE COUNTER VOLTS: 220 PHASE: 1 HERTZ: 60 DIMENSIONS: 112" X 58" X 80" S/N: TC8 2478/01

2019 WAM 120 319 LT-P AUGER SCREW GRAIN ELEVATOR WITH CUSTOM HOPPER. AUGER SCREW GRAIN ELEVATOR: 332" X 40" X 24"; AUGER SCREW DIAMETER 12"; STAINLESS STEEL CONSTRUCTION. CUSTOM HOPPER: AUTOMATED TECHNICAL SERVICES; OVERALL DIMENSIONS: 55" X 55" X 102"; BOTTOM OPENING: 13" X 13"

AESUS HYBRID TUNNEL 48" COMBINATION STEAM AND ELECTRIC SHRINK TUNNEL (PATENTED) FOR DIFFICULT, VERY PRECISE, AND OR WIDELY CONTOURED CONTAINERS. STEAM, DELIVERS A BETTER SHRINK THAN PURE ELECTRIC. THE ADDITION OF A SMALL STEAM GENERATOR AND SPECIALLY DESIGNED STEAM TUBES TO OUR INFRA RED TUNNEL GIVES THIS BETTER SHRINK BUT AT AN AFFORDABLE PRICE. 48 INCH TUNNEL HAS DUAL ZONES FOR BOTH THE INFRA RED HEATERS AND THE STEAM TUBES TO ENABLE GENTLE EVEN SHRINK AT THE ENTRANCE TO THE TUNNEL AND TO FINISH WITH A HOTTER EXIT. THE FURTHER ADVANTAGE TO THE COMBINATION HYBRID TUNNEL IS THAT ONLY A LITTLE STEAM IS USED AND SO THE PROCESS IS MUCH DRIER THAN IT WOULD BE WITH A STEAM ONLY TUNNEL AND ALSO THE SHRINKING IS COMPLETED IN MUCH LESS SPACE THAN CONVENTIONAL TUNNELS. DIMENSIONS: 68" X 53" X 76" TUNNEL OPENING: 13" X 8.5" S/N: 492371114 VAC: 208 PHASE: 3 HERTZ: 60 AMPS: 60

AXON EZ- 36- SR74 HEAT TUNNEL DIMENSIONS: 50" X 50" X 86" TUNNEL HEIGHT: 7 INCHES TUNNEL WIDTH: 7.5 INCHES TEMPERATURE RANGE: UP TO 400 FAHRENHEIT HEATING TYPE: CONVECTIVE STAND INCLUDED: YES STAND HEIGHT RANGE: ADJUSTABLE BUT RANGE UNSPECIFIED CONVEYOR INCLUDED: NO VOLTAGE: 230 HERTZ: 60HZ AMPERAGE: 37 AMPS GENERAL INFO: THE EZ-SR CONVECTIVE HEAT SHRINK TUNNEL IS DESIGNED TO PROCESS BOTH TAMPER-EVIDENT BANDS AND SHRINK SLEEVES. THIS SERIES SETS THE STANDARD FOR PERFORMANCE, FLEXIBILITY, AND VALUE. THEY ARE CONFIGURED IN STANDARD OR CUSTOM SIZES TO PROVIDE OPTIMUM SHRINK PERFORMANCE FOR A WIDE VARIETY OF CONTAINER SIZES AND SHAPES

2012 FORTRESS SC-CONV-160SSHDK6KICK METAL DETECTOR APRETURE OPENING: 10" X 5" BELT WIDTH: 6" S/N: CVF-2814 GENERAL INFO: PHANTOM METAL DETECTORS DETECT FERROUS, NON-FERROUS, AND STAINLESS STEEL CONTAMINANTS USING PRECISION DIGITAL SIGNAL PROCESSING TECHNOLOGY. AN EXTRA RUGGED CASING IS UTILIZED FOR INCREASED STABILITY AND PERFORMANCE IN HARSH ENVIRONMENTS. THE PHANTOMS HIGH QUALITY BUILD AND STRAIGHTFORWARD INTERFACE ENHANCES EASE OF USE FOR THE OPERATOR. KEY FEATURES: CORE DSP DIGITAL SIGNAL PROCESSING (DSP) TECHNOLOGY PROVIDES UNPARALLELED PRECISION, SPEED, AND DETECTION RESULTS ULTRASENSE MAINTAINS HIGH SENSITIVITY LEVELS TO DETECT THE SMALLEST METAL CONTAMINANTS AUTOTEST AUTO TEST ENSURES CONSISTENT PERFORMANCE AND SAVES COSTS AUTOCAL AUTOMATIC CALIBRATION AT THE TOUCH OF A BUTTON INTUITIVE USER INTERFACE PROVIDES DEDICATED SHORTCUT KEYS FLASH RAM FLASH MEMORY TECHNOLOGY PREVENTS INFORMATION LOSS MODULAR DESIGN FEWER PRODUCT PARTS RESULTS IN GREATER RELIABILITY APPLICATIONS: BAKERY MEATS PACKAGED PRODUCTS PREPARED MEALS DAIRY HEALTHCARE CONFECTIONERY CHILLED / FROZEN FOODS

2013 QUADREL LABELING SYSTEMS SL200 SHRINK SLEEVE LABEL APPLICATOR S/N: 81114-01 VOLTS: 120 PHASE: 1 AMPS: 10 DIMENSIONS: 50"X54"X72" SPEED: UP TO 200 BOTTLES PER MINUTE ACCURACY: +/- 1/32 DISPENSED ACCURACY BOTTLE DIAMETER RANGE: .875 3.86 GENERAL INFO: THE SL200 SHRINK SLEEVE LABEL APPLICATOR CAN BE CONFIGURED AS A FULL-BODY OR MID-BODY SHRINK SLEEVE LABEL APPLICATOR BY SIMPLY CHANGING THE MANDREL AND SELECTING THE PROPER MODE IN THE TOUCHPAD CONTROL. FEATURES INCLUDE ALLEN BRADLEY PLC CONTROL AND COLOR TOUCHSCREEN, SERVO-DRIVEN LABEL FEED, STEPPER-DRIVEN CUTTING MECHANISM, QUICK-CHANGE KNIFE PLATES, AND MANDREL-STYLE SLEEVE HANDLING. THE SYSTEM IS CAPABLE OF APPLYING UP TO 200 TAMPER BANDS OR FULL BODY SLEEVES PER MINUTE. FEATURES: MANDREL STYLE SLEEVE HANDLING WITH SEALED ROLLER BEARINGS USER-SELECTABLE OPTICAL OR DIGITAL SLEEVE REGISTRATION OPTIONS COLOR TOUCHSCREEN ALLEN-BRADLEY PLC STEPPER DRIVEN CUTTER U-MOUNT STYLE MOUNTING- COMPATIBLE WITH MOST T-BASE STANDS FULL SYSTEM GUARDING THE INTEGRATED PRODUCT DETECTION SENSOR QUICK CHANGE KNIFE PLATE WITH DISPOSABLE BLADES ENCODER INTERFACE OPTION

DONALDSON DFO 1-1 DUST COLLECTOR VOLTS: 208/460 HP: 1-1/2 CYCLES: 60 PHASE: 3 RPM: 3450 OVERALL DIMENSIONS: 75'' X 112'' X 72" S/N: IG775793

LANTECH SW1000 HEAT SEAL WRAPPER DIMENSIONS: 72" X 44" X 57" BELT: 15.5" PRODUCTION OUTPUT RATE: UP TO 40 PACKAGES PER MINUTE PRODUCTION SPEED: UP TO 90 FEET PER MINUTE MINIMUM PRODUCT SIZE: 3 LENGTH X 1 WIDTH X 0.125 HEIGHT (INCHES) MAXIMUM PRODUCT SIZE: INFINITE LENGTH X 15 WIDTH X 8 HEIGHT (INCHES) INTERMITTENT MOTION CROSS SEAL: HOT KNIFE, 18 INCH WIDTH FILM WIDTH RANGE: 6 TO 24 INCHES POWER SUPPLY: 230 VOLTAGE / 1 PHASE / 60 HERTZ / 15 AMPERAGE GENERAL INFO: MECHANICAL SCRAP REWIND, ADJUSTABLE FILM INVERTING HEAD. FILM TYPES: MOST COMMERCIAL GRADE POLYOLEFIN, PVC, SOME FILMS MAY REQUIRE CHANGE-PARTS. HMI DIGITAL READ OUT. HAS MITSUBISHI MODEL FX-2NC CONTROLS. INCLUDES LANTECH MODEL ST-700 SHRINK TUNNEL. CAPABLE OF SPEEDS UP TO 70 FEET PER MINUTE DEPENDENT ON PACKAGE CONFIGURATION AND FILM. HAS FOUR ZONES. CHAMBER DIMENSIONS: 51" LONG X 22" WIDE X 10" HIGH. HAS AN APPROXIMATE CHAMBER TEMPERATURE OF 325-350 DEGREES FAHRENHEIT. STAINLESS STEEL WIRE BELT CONVEYOR

1996 G. MONDINI VS/A JACKETED KETTLE HORIZONTAL MIXING BLADE S/N: 1276/96-2 VOLTS: 220 PHASE: 3 HZ: 60 DIMENSIONS: OPENING OF TANK: 34 1/2" DEPTH: 38" OUTLET ON BOTTOM: 2" OVERALL DIMENSIONS: 72" X 72" 80"

2010 JACKETED TANK 250 GAL CAPACITY: 250 GAL JACKETED AIR: 100 PSI @ 330 F DIMENSIONS: 59"X50"89" JACKET PRESSURE: 100 PSI AT 330 PSI S/N: B09-1239

CHERRY BURREL STAINLESS STEEL MIXING TANK 200 GALLON WITH LIGHTNING MIXER DIMENSIONS OF TANK: DIAMETER OF TOP: 68" CENTER OF TANK: 30" X 68" BOTTOM OF TANK: 16" X 34" MANHOLE OPENING ON TOP: 18" OUTLET OPENING: 2" OVERALL DIMENSIONS: 68" X 113" 68"

2013 QUADREL LABELING SYSTEMS SL200 SHRINK SLEEVE LABEL APPLICATOR S/N: 81217-100 VOLTS: 120 PHASE: 1 AMPS: 10 DIMENSIONS: 50"X54"X72" SPEED: UP TO 200 BOTTLES PER MINUTE ACCURACY: +/- 1/32 DISPENSED ACCURACY BOTTLE DIAMETER RANGE: .875 3.86 GENERAL INFO: THE SL200 SHRINK SLEEVE LABEL APPLICATOR CAN BE CONFIGURED AS A FULL-BODY OR MID-BODY SHRINK SLEEVE LABEL APPLICATOR BY SIMPLY CHANGING THE MANDREL AND SELECTING THE PROPER MODE IN THE TOUCHPAD CONTROL. FEATURES INCLUDE ALLEN BRADLEY PLC CONTROL AND COLOR TOUCHSCREEN, SERVO-DRIVEN LABEL FEED, STEPPER-DRIVEN CUTTING MECHANISM, QUICK-CHANGE KNIFE PLATES, AND MANDREL-STYLE SLEEVE HANDLING. THE SYSTEM IS CAPABLE OF APPLYING UP TO 200 TAMPER BANDS OR FULL BODY SLEEVES PER MINUTE. FEATURES: MANDREL STYLE SLEEVE HANDLING WITH SEALED ROLLER BEARINGS USER-SELECTABLE OPTICAL OR DIGITAL SLEEVE REGISTRATION OPTIONS COLOR TOUCHSCREEN ALLEN-BRADLEY PLC STEPPER DRIVEN CUTTER U-MOUNT STYLE MOUNTING- COMPATIBLE WITH MOST T-BASE STANDS FULL SYSTEM GUARDING THE INTEGRATED PRODUCT DETECTION SENSOR QUICK CHANGE KNIFE PLATE WITH DISPOSABLE BLADES ENCODER INTERFACE OPTION

2019 JORESTECH TUN- 1540 HEAT TUNNEL 1540 VOLTS: 220 PHASE: 1 HERTZ: 60 AMPS: 30 KW: 6.5 TUNNEL APERTURE: 5.5" X 5" DIMENSIONS: 65" X 24" X 58" S/N: 2019070678

NJM CONVD25-S005 CONVEYOR 25' LONG VOLTS: 120 PHASE: 1 HERTZ: 60 HP: 3/4 BELT: 4.5" VARIABLE SPEED CONTROL S/N: 24466-23

PATTERSON KELLEY V-BLENDER 2 CU/FT CAPACITY: 2 CU/FT MAX MATERIAL DENSITY: 60 LB/CU-FT S/N: 214198 OUTLET: 6" BUTTERFLY VALVE DIMENSIONS: 72"X34"X72" NO INTENSIFIER BAR STAINLESS STEEL CONTACT AREA

NILFISK 3151 VACUUM TYPE: 3151 VOLTS: 220-275/380-480 PHASE: 1/3 HP: 2.8 AMPS: 7.1/4.1 AIR FLOW: 140 CFM CAPACITY: 6.6 GAL WEIGHT: 92.4 LBS DIMENSIONS: 30" X 24" X 4" GENERAL INFO: THE VERTICAL BASE OF THE CFM 3101 AND CFM 3151 INDUSTRIAL VACUUM CLEANERS IS DESIGNED FOR STATIONARY SUCTION IN CONFINED AREAS. WHEN INTEGRATED INTO MANUFACTURING AND FABRICATION PROCESSES, THE VACUUMS SAVE VALUABLE TIME BY COLLECTING FINE POWDER AND DUST DIRECTLY FROM THE SOURCE, BEFORE THE DEBRIS SETTLES ON SURROUNDING WALLS, FLOORS AND EQUIPMENT.

2001 YZ E4 TELESCOPIC MIXING LIFT AND TOTE MIXER. HP: 0.75. DIMENSIONS: 34" X 80" X 85"

1983 N-100 100 GAL 2/3 JACKETED KETTLE CAPACITY: 100 GAL S/N: 114605 WITH MOUNT FOR MIXER BLADE

NJM MCOLT- 5031 LABELER MODEL: MCOLT- 5031 SERIAL NUMBER: 35814-01 VOLTS: 120 HERTZ: 60 AMPS: 12 AIR: 80 PSI DATE: 1/2 HP DIMENSIONS: 85'' X 53'' X 53" CONVEYOR WIDTH: 4 1/2" LABEL WEB WIDTH: 7 3/4" SIZE OF CONTAINERS DIAMETER MIN. 1/2 (12.7 MM), MAX. 4 (101.6 MM) HEIGHT MIN. 1 (25.4 MM), MAX. 8 (203 MM) SIZE OF LABELS LENGTH MIN. 1/2 (12.7 MM), MAX. 8.5 (216 MM) WITH DRUM WRAP-AROUND HEIGHT MIN. 1/2 (12.7 MM), MAX. 7 (177 MM) MAX: HIGHER LABEL POSSIBILITY ON REQUEST ROLL SIZE MAX. 14 (355 MM) WITH 3 (76 MM) CORE DIAMETER LABEL POSITION MIN. DISTANCE FROM BOTTOM OF CONTAINER TO BOTTOM OF LABEL 3/16 (5MM) MAX. DISTANCE FROM BOTTOM OF CONTAINER TO BOTTOM OF LABEL 3 (76MM) CODER TRAVEL ADJUSTMENT (DEPENDING ON LABEL CONFIGURATION) UP TO 8 (203 MM) WITH HOT STAMP CODER IN VERTICAL POSITION UP TO 5 1/2 (140 MM) WITH HOT STAMP CODER IN HORIZONTAL POSITION (SUBJECT TO INSPECTION OF SAMPLES) AIR & ELECTRICAL REQUIREMENTS AIR SUPPLY 90 PSIG, LESS THAN 0.6 SCFM POWER SUPPLY 120 VAC, 1 PHASE, 60 HZ, 5A OVERALL MEASUREMENTS LENGTH 84 (2.13 M) WIDTH 45 (1.14 M) HEIGHT 48 (1.22 M) OUTPUT UP TO 100 CPM, BOTTLE SIZE 100CC, 1 7/8 (48 MM) DIAMETER LABEL LENGTH 5 (127 MM) GENERAL INFO: MODEL 120 MINICOLT WRAP-AROUND PRESSURE SENSITIVE LABELER IS AFFORDABLE, COMPACT AND ACCURATE. IT APPLIES LABELS TO ROUND CONTAINERS AT SPEEDS OF UP TO 100 CPM AND COMES EQUIPPED WITH USER-FRIENDLY CONTROLS FOR EASY SET-UP AND OPERATION. ITS STEPPER DISPENSER MOTOR ALLOWS VERY ACCURATE AND REPEATABLE LABELING. USING VERY LITTLE LINE SPACE, PACKAGERS CAN ADD THE SUPERIOR RELIABILITY OF THE MODEL 120 MINICOLT PRESSURE SENSITIVE LABELER TO THEIR OPERATIONS. THE UNIT WILL BE SET UP AND RUNNING QUICKLY, THANKS TO THE BASIC CONTROL PANEL. STANDARD FEATURES DESIGNED ACCORDING TO CGMP REGULATIONS STAINLESS STEEL TUBULAR FRAME STAINLESS STEEL RAISED-BED CONVEYOR VARIABLE SPACING WHEEL DRUM WRAP-AROUND SYSTEM 14 DIAMETER LABEL ROLL CAPACITY STEPPER MOTOR TECHNOLOGY ON LABEL DISPENSER USER-FRIENDLY CONTROL PANEL SPEEDS UP TO 100 CPM

USED COATING PAN WITH HOT AIR BLOWER AND SPRAY NOZZLE MODEL: BY-1000B VOLTS: 220 PHASE: 1 HZ: 60 POWER: 1.7+4 KW MAX CURRENT: 32A S/N: SDM1756-04 AIR PRESSURE: 0.4-0.6 MPA MANUFACTURER: SHANGHAI DEVELOP MACHINERY STAINLESS STEEL DIMENSIONS: OPENING: 23" WIDEST POINT OF PAN: 36" DEPTH: 32"

MODULAR CONVEYOR WITH STAINLESS STEEL BELT 14' LENGTH - 1 USED MODULAR CONVEYOR WITH STAINLESS STEEL BELT CONVEYOR LENGTH: 14' LENGTH BELT WIDTH: 4.5"

CONVEYOR WITH VARIABLE SPEED CONTROL 15' LENGTH - 1 USED CONVEYOR WITH VARIABLE SPEED CONTROL DIMENSIONS: 15' LENGTH, 6" BELT WIDTH MODEL: DELTAVEYOR 6" SS SERIAL NUMBER: 512221015A VOLTS: 110 PHASE: 1 HERTZ: 60 AMPS: 12

COATING PAN WITH HOT AIR BLOWER AND SPRAY NOZZLE MODEL: BY-1000B VOLTS: 220 PHASE: 1 HZ: 60 POWER: 1.7+4 KW MAX CURRENT: 32A S/N: SDM1766-02 AIR PRESSURE: 0.4-0.6 MPA MANUFACTURER: SHANGHAI DEVELOP MACHINERY STAINLESS STEEL DIMENSIONS: OPENING: 20 WIDEST POINT: 38" DEPTH: 21"

KETAN RT36 ACCUMULATION TABLE 36'' - 1 USED KETAN RT36 ACCUMULATION TABLE MODEL: RT36 DIAMETER: 36" VARIABLE SPEED CONTROL INPUT: 115/ 208- 230 VAC HERTZ: 50/60 DIMENSIONS: 42" X 42" X 27"

COATING PAN DIMENSIONS: OPENING: 23" WIDEST POINT: 36" DEPTH: 32" CAPACITY: RPM (IN): 1720 RPM (OUT): 28 TORQUE: 4489 LB-IN STAINLESS STEEL

PPP BOTTLE ELEVATOR 48" X 100" X 92"

VAC-U-MAX SYSTEM BLOWER MOTOR SOUND DAMPING BOX S/N: 5237

VAC-U-MAX BAG LOADER S/N: C-1270656

OLYMPIAN GENERATOR G100F1 MODEL: G100F1 DIMENSIONS: 96"X37"X61" KW: 100 KVA: 125 VOLTAGE: 208 FREQUENCY(HZ): 60 RPM: 1800 HP: 135 FUEL TYPE: NATURAL GAS HOURS: 461 EMISSIONS: N/A MANUFACTURER: CATERPILLAR SERIAL NUMBER PREFIX: E52 CPL/ARRANGEMENT NUMBER: N/A MODEL: G100F1 CONDITION: PRE-OWNED

HEAT SEAL SHRINK TUNNEL MODEL: HDT-4822/8 TMR S/N: LRA 15018 SERIES: G VOLTS: 230 PHASE: 3 WATTS: 15 KW AMPS: 42 HZ: 50/60 CONVEYOR: 22" X 11" DIMENSIONS:74" X 66" X 36"

CUDA H20- 2840 PARTS WASHER VOLTS: 460 PHASE: 3 HERTZ: 60 AMPS: 11 S/N: 10434190- 100122

HYSTER B60ZAC WALK BEHIND PALLET JACK BATTERY TYPE: E MAX HOURS: 6 TRUCK WEIGHT LESS BATTERY: 1200LB TRUCK WEIGHT MAX BATTERY: 2400LB MIN. BATTERY WEIGHT: 500LB MAX BATTERY WEIGHT: 1200LB MAX CAPACITY: 6000LB BATTERY CELLS: 12 VOLTS: 24 LBS: 966 OVERALL DIMENSIONS 38" X 55" X 75" AND LIFEPLUS CHARGER

HYSTER B60Z PALLET JACK BATTERY TYPE: E MAX HOURS: 6 TRUCK WEIGHT LESS BATTERY: 1200LB TRUCK WEIGHT MAX BATTERY: 2400LB MIN. BATTERY WEIGHT: 500LB MAX BATTERY WEIGHT: 1200LB MAX CAPACITY: 6000LB BATTERY CELLS: 12 VOLTS: 24 LBS: 966 DIMENSIONS: 48" X 30" X 15" PALLET JACK: 38" X 55" X 75" S/N: A230N04651D