57 CNC Fab No Reserve Auction to Canadian Facilities

2011 TRUMPF TRUBEND 5130 PRESS BRAKE PRESS FORCE: 141 US TONS BENDING LENGTH: 127 WIDTH BETWEEN COLUMNS: 106 USABLE INSTALLATION HEIGHT: 24 THROAT: 16.5 CONTROL: TASC 6000 OIL CAPACITY: 58 GAL. DIMENSIONS AND WEIGHT: LENGTH X WIDTH: 160 X 69 IN. HEIGHT: 112 IN. WEIGHT: 24,030 LBS. EQUIPPED WITH 6 AXIS CONTROL AND BACKGAUGE CROWNING HYDRAULIC CLAMPS WILA

2001 ACCURPRESS 732016 HYDRAULIC PRESS BRAKE 320 TON X 16 FOOT. MAKE: ACCURPRESS MODEL: 732016 TONNAGE: 320 LENGTH: 16' DISTANCE BETWEEN HOUSINGS 170 LENGTH OF THE BOTTOM DIE 192 THROAT DEPTH: 10.125 LENGTH OF BACK GAUGE: DEPTH 24.703---LENGTH 159 2 AXIS 575 V MACHINE WEIGHT: 44,000 LBS EQUIPPED WITH ETS 3000 CONTROL, BRAND NEW CONTROL INSTALLED IN 2022, MANUAL CROWNING.

2019 SIMEC MEC 120 FULLY AUTOMATIC CNC TUBE SAW DESCRIPTION ROUND TUBE: FROM 10MM TO 100MM (0.394" - 3.94") SQUARE TUBE: FROM 10 X 10MM TO 90 X 90MM (0.394" X 0.394" TO 3.54" X 3.54") RECTANGULAR: FROM 10 X 10MM TO 120 X 80MM (0.394" X 0.394" TO 4.7" X 3.15") BAR: FROM 10MM TO 40MM (0.394" - 1.58") MINIMUM CUT LENGTH: 10MM (0.394") MAXIMUM CUT LENGTH: UP TO 3000MM (UP TO 118") CUTTING TOLERANCE: +/- 0.2MM (0.008") ANGLE CUT: +/-60 BLADE DIAMETER: FROM 250MM TO 350MM (9.84" - 13.78") CUTTING SPEED: FROM 30RPM TO 3000RPM, DEPENDING ON THE MATERIAL FEEDING SPEED OF THE GRIPPER: 1.5M/S (4.9 FT/SEC) BLADE MOTOR: 2.25/ 3KW (OR 4KW WITH INVERTER) CUTTING PLANE HEIGHT: 900MM (35.4") MAXIMUM VICE OPENING: 130MM (5.12") EQUIPPED WITH -STRAIGHT OR ANGLE CUT OF TUBES FROM MINIMUM 10MM TO MAX 100MM (0.394" - 3.94") - STEP BY STEP FEEDING OF THE GRIPPER: STROKE 2000MM (78.74") THROUGH BALL SCREW AND MOTOR BRUSHLESS - AUTOMATIC POSITIONING OF THE FEEDING GRIPPER LENGTH - QUICK RELEASE VICE JAWS FOR RAPID TOOLING CHANGES - DOUBLE CLAMPING VICES, ON BOTH SIDES OF THE SAW BLADE - HYDRAULIC CLAMPING VICE AND GRIPPER - VERTICAL CUTTING DESCENDING FROM ABOVE SAW HEAD MOUNTED ON PRISMATIC GUIDES TEMPERED AND GROUND - DISCHARGE SYSTEMS WITH UNLOADER CYLINDER PLUS DEFLECTOR AUTO FEED CNC CONTROL TOOLING EXIT SYSTEM LESS THAN 1000 HOURS TOTAL OF USAGE

2006 FICEP 1101 DZB BEAM LINE MAX BEAM WIDTH: 3-3, MAX BEAM LENGTH: 65-0 MAX BEAM HEIGHT: 2-0 MAX CUT ANGLE: 45 CURRENT OPERATING HOURS: 70,000 HOURS EQUIPPED WITH MIDDLE CONVEYOR DOES NOT INCLUDE INFEED OR OUTFEED CONVEYORS MULTI AXIS DRILL / BEAM LINE

1991 TOS VARNSDORF W9 TOS HORIZONTAL BORING MILL - MIN MOTOR - 1455 RPM X TRAVEL - 39.4/49.2 INCH Z TRAVEL - 31.5/55.1 INCH Y TRAVEL - 35.4/44.1 INCH W TRAVEL - 28 INCH WORK SPINDLE DIAMETER - 3.5 INCH CLAMPING TAPER - 40 ISO EQUIPPED WITH 4 LINEAR AXES FIXED COLUMN, CROSSWISE TRAVELING TABLE SLIDING WORK SPINDLE ROTARY TABLE FACING HEAD WITH TOOL SLIDE

2005 HAAS VF-8/50 VERTICAL MACHINING CENTER X-AXIS TRAVEL: 64" Y-AXIS TRAVEL: 40" Z-AXIS TRAVEL: 30" RAPID RATE X AXIS: 540 IPM RAPID RATE Y AXIS: 600 IPM RAPID RATE Z AXIS: 600 IPM MAX TABLE LOAD: 4,000 LBS SPINDLE MOTOR: 30 HP SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: 50 CT TOOL CHANGER: 24 ATC TABLE SIZE: 64" X 36" DIMENSIONS: 193" X 120" X 132" WEIGHT: 29,000 LBS EQUIPPED WITH SMTC50, GEAR BOX, CHIP CONVEYOR, AUGER STYLE, PROGRAMMABLE COOLANT NOZZLE, EXPANDED MEMORY TO 1 MB, VISUAL QUICK CODE PROGRAMMING SYSTEM, REMOTE JOG HANDLE, HIGH-INTENSITY LIGHTING, THROUGH SPINDLE COOLANT, 300 PSI, AUXILIARY COOLANT FILTER SYSTEM, SERVO ROTARY TABLE, NEEDS VFD DRIVE

2008 PYTHON X ROBOTIC PLASMA CUTTING SYSTEM FOR CUTTING I-BEAMS, CHANNELS, TUBES, ANGLES, AND FLAT SHEET CAPACITY: 36' WIDE 260 AMP PLASMA BEAM WIDTH, MINIMUM 4" BEAM WIDTH, MAXIMUM 36" CHANNEL WIDTH, MINIMUM 3" CHANNEL WIDTH, MAXIMUM 36" HSS TUBE, MINIMUM 2" X 2" HSS TUBE, MAXIMUM 24" X 16" ANGLES, MINIMUM 3" X 3" ANGLES, MAXIMUM 8" X 8" STRIP WIDTH, MINIMUM 4" STRIP WIDTH, MAXIMUM 36" STRIP THICKNESS, MINIMUM .25" STRIP THICKNESS, MAXIMUM 1.25" BEAM LENGTH, MAXIMUM 480" EQUIPPED WITH PYTHON CNC CONTROL ABB ROBOT FOR 3-SIDE PROCESSING HPR260 PLASMA SYSTEM 65FT INFEED CONVEYOR 45FT OUTFEED CONVEYOR

2011 FICEP SC100 HORIZONTAL BAND SAW CAPACITY: 40 INCH X 17.75 INCH CAPACITY RANGE AT 90: 3-1/8 X 3/8 MIN TO 40 X 17-3/4 MAX MAX CAPACITY AT 60: 13-3/4 X 13-3/4 MAX CAPACITY AT 45: 24-3/8 X 17-3/4 SAW BLADE SIZE (WIDTH X KERF): 1.61 X 0.051 X 310.24 SAW BAND DRIVE MOTOR: 7.5 HP SAW BLADE SPEEDS: 65 328 FPM (PROGRAMMABLE) ANGLE LEG HEIGHT (EQUAL/UNEQUAL LEGS) : MIN 3-1/8 X 3-1/8 X 3/8 MAX 10 X 10 X 1-9/16 ANGLE FLATS WIDTH MIN SAW: MIN 4 - MAX 40 SQUARE TUBES SIZES: MIN 3-1/8 - MAX 17-3/4 RECTANGULAR TUBES SIZES MIN/MAX: 3-1/8 X 1-9/16 SAW RECTANGULAR TUBES SIZES: 40 X 17-3/4 OVERALL CAPACITY: 44" X 44" X 4' MAX LENGTH: 40' (CAN BE EXTENDED WITH OPTIONS) MIN LENGTH TO BE TRANSFERED: 98" MIN LENGTH TO BE TRANSFERRED IN WORKING ZONE (WITH SAW ROTATION +45/-60) - LOADING SIDE A: 106" MIN LENGTH TO BE TRANSFERRED IN WORKING ZONE (WITH SAW ROTATION +45/-60) - LOADING SIDE B OR A: 126" MIN LENGTH TO BE TRANSFERRED IN WORKING ZONE (WITH SAW ROTATION +60/-60) - LOADING SIDE B: 145" I-BEAMS DEPTH: MIN 3-1/8 MAX: 40 I-BEAMS FLANGE HEIGHT MIN: 1-5/8 MAX: 17-3/4 CHANNEL DEPTH: MIN 3-1/8 MAX: 40 FLANGE HEIGHT: MIN 1-3/4 - MAX 11-3/4 EQUIPPED WITH CONVEYOR AND TRANSFER TABLES NOT INCLUDED UNLOADING DEVICE WITH MAGNET FOR SHORT PIECES AUTOMATIC WEB PROBING (TOP SIDE) CNC DOUBLE COLUMN GEARBOX DRIVE TYPE HYDRAULIC DOUBLE-JAW VISE ASSEMBLY INFINITELY VARIABLE SPINDLE SPEEDS LASER MEASURING SYSTEM LAYOUT MARKING CAPABILITY POSSIBLE TO WORK LOWER MIN LENGTHS WITH AUXILIARY TRANSFER DEVICE SCRIBING SOFTWARE & FLOATING HEAD TOOL ASSEMBLY SCS 100 SAWING UNIT SHORT PIECES UNLOADING DEVICE SPINDLE PROBING THRU SPINDLE AND FLOOD COOLANT SYSTEM VERTICAL HOLD-DOWNS

AMADA RG-100 PRESS BRAKE TONNAGE: 100 TABLE LENGTH: 157.6" MAX BENDING LENGTH: 161.5" DISTANCE BETWEEN UPRIGHTS: 122.1" THROAT DEPTH: 15.76" LENGTH OF STROKE: 3.94" OPEN HEIGHT: 14.85" POWER REQUIRED: 8 KVA HYDRAULIC OIL RESERVOIR: 17.16 GAL EQUIPPED WITH RAM CLAMPS CONTROL: NC9-EX OVERALL LENGTH: 157.6" OVERALL WIDTH: 61.5" OVERALL HEIGHT: 98.1" GROUND HEIGHT: 98.1" NET WEIGHT: 16,500 LBS

2014 TRUMPF TRULASER 1030 LASER CUTTING MACHINE TABLE WIDTH: 5' TABLE LENGTH: 10' MAX WATTAGE: 2,000 X-AXIS TRAVEL: 120" Y-AXIS TRAVEL: 60" Z-AXIS TRAVEL: 4.5" CONTROL: TRUMPF CNC APPROX. OVERALL DIMENSIONS 368" X 236" X 91" APPROX. WEIGHT 20,950 LBS

2011 FICEP 1001 DFB DRILL OVERALL CAPACITY: 44" X 44" X 4' MAX DRILLING THICKNESS: 4" MAX LENGTH: 40' (CAN BE EXTENDED WITH OPTIONS) MIN LENGTH TO BE TRANSFERED: 98" MIN LENGTH TO BE TRANSFERRED IN WORKING ZONE (WITH SAW ROTATION +45/-60) - LOADING SIDE A: 106" MIN LENGTH TO BE TRANSFERRED IN WORKING ZONE (WITH SAW ROTATION +45/-60) - LOADING SIDE B OR A: 126" MIN LENGTH TO BE TRANSFERRED IN WORKING ZONE (WITH SAW ROTATION +60/-60) - LOADING SIDE B: 145" MAX HOLE DIAMETER: 1-9/16" SPINDLE MOTOR: 20 HP AC DRIVE RPM RANGE: 180-2500 RPM I-BEAMS DEPTH: MIN 3-1/8 MAX: 44 (DRILL) I-BEAMS FLANGE HEIGHT MIN: 1-5/8 MAX: 17-3/4 CHANNEL DEPTH: MIN 3-1/8 - MAX: 44 (DRILL) FLANGE HEIGHT: MIN 1-3/4 - MAX 11-3/4 ANGLE FLATS WIDTH MIN SAW/DRILL: MIN 4 MAX 44 (DRILL) MAX SECTION WEIGHT: 11900 LBS. (STANDARD) MAX LINEAR WEIGHT OF SECTION: 300 LBS/FT MAX CARRIAGE SPEED: 164 FPM PASSLINE: 33-1/2 TOOL CHANGER: 6 TOOLS EQUIPPED WITH PINCHER FOR A 65' SECTION (1) SPINDLE PER DRILL HEAD AUTOMATIC WEB PROBING (TOP SIDE) CONVEYOR AND TRANSFER TABLES NOT INCLUDED DRILL HAS NEW CONTROL/DRILL HEAD/DRIVE/ENGINE DRILL HEAD ON SAW GEARBOX DRIVE TYPE HSK-A80 TOOL HOLDERS INFINITELY VARIABLE SPINDLE SPEEDS LASER MEASURING SYSTEM LAYOUT MARKING CAPABILITY POSSIBLE TO WORK LOWER MIN LENGTHS WITH AUXILIARY TRANSFER DEVICE SCRIBING SOFTWARE & FLOATING HEAD TOOL ASSEMBLY SHORT PIECES UNLOADING DEVICE SPINDLE PROBING THRU SPINDLE AND FLOOD COOLANT SYSTEM UNLOADING DEVICE WITH MAGNET FOR SHORT PIECES

2000 HINES 300NC TUBE BENDER CAPACITY: MILD STEEL: 4" OD X 0.95" WALL STAINLESS: 3-1/2" X .145 WALL STANDARD MAXIMUM RADIUS: 18" MAXIMUM BENDING ANGLE: 190 DEGREES BENDING ARM SPEED: 3.5 RPM BENDING ANGLE ACCURACY PLUS/- 0.1 DEGREE POWER REQUIREMENTS: 220/3/60, 440/3/60 EQUIPPED WITH DUAL STAGE PUMP HYDRAULIC SYSTEM (REBUILT IN 2022) PRESSURE DIE ASSIST PRESSURE DIE HOLDER WIPER DIE HOLDER MANDREL LUBRICATOR TUBE PIECE COUNTER FOOT PEDAL CONTROL TOOLING INCLUDED ALL MANUALS AVAILABLE

COLGAR 80T PRESS BRAKE TONNAGE: 80 LENGTH: 120 CONTROL: AUTOBEND IV EQUIPPED WITH DIE RAIL RAM CLAMPS PROGRAMMABLE BACK GAUGE FRONT ARMS

1968 MINSTER 60T OBI PRESS TONNAGE: 60 STROKE: 4" RAM ADJUSTMENT: 3.5" SHUT HEIGHT: 13.5" BED SIZE: 21" X 32" SPEED: 90 SPM AIR PRESSURE: 55 PSI MAX. ADJUSTMENT OF SLIDE: 3-1/2" EQUIPPED WITH AIR CLUTCH & BRAKE CONTROL: JIT PROGRAMMABLE CONTROLS INCLINING MECHANISM ELECTRIC FOOT SWITCH FOR OPERATION AIR COUNTER BALANCE FLY WHEEL TYPE DUAL PALM BUTTON STATION FOR OPERATION BOLSTER PLATE RAM ADAPTER PLATE DIMENSIONS 75" L X 60" W X 120" H WEIGHT: 14,000 LBS