Single Facility CNC Fabrication Machine Tools Auction

2003 ROMI M-17 CNC FLAT BED LATHE - CONTROL: FANUC SERIES 21I-T SWING OVER BED: 16.93 SWING OVER CROSS SLIDE: 8.03 MAXIMUM TURNING DIAMETER: 16 DISTANCE BETWEEN CENTERS 39.37 SPINDLE SPEEDS 3,000 RPM SPINDLE BORE 2.09 SPINDLE DRIVE MOTOR 10 HP TAILSTOCK QUILL DIAMETER 2.36 TAILSTOCK QUILL TRAVEL 4.7 APPROX. SHIPPING WEIGHT: 6,300 LBS APPROX. SHIPPING DIMENSIONS: 108 L X 50 W X 77 H EQUIPPED WITH: 3-JAW CHUCK, RS 232, EXTRA JAWS, TAILSTOCK

1991 HAAS VF-1 TABLE WORKING SURFACE............................. 14" X 26" TABLE LOAD CAPACITY............................... 750 LBS LONGITUDINAL TRAVEL (X-AXIS)...................... 20" CROSS TRAVEL (Y-AXIS)............................. 16" VERTICAL TRAVEL (Z-AXIS).......................... 20" MAXIMUM CLEARANCE TABLE TOP TO SPINDLE NOSE....... 24" FEED RATES, ALL AXES.............................. 0 TO 200 IPM RAPID TRAVERSE RATE, ALL AXES..................... 470 IPM TOOL STORAGE CAPACITY............................. 16 SPINDLE HORSEPOWER................................ 7.5/5 HP SPINDLE SPEEDS RANGE.............................. 0-5000 RPM SPINDLE TAPER..................................... NO. 40 CAT ELECTRICS......................................... 230/460/3/60 APPROXIMATE MACHINE DIMENSIONS.................... 73" X 95" APPROXIMATE MACHINE HEIGHT........................ 106" APPROXIMATE MACHINE WEIGHT........................ 6,400 LBS

2014 FP21W CHIP BLASTER HIGH PRESSURE COOLANT SYSTEM {UMP VOLTAGE: 230 PHASE: 3 FREQUENCY: 60 HZ FULL LOAD CURRENT: 4.7 LARGEST LOAD: 3.1"

2014 CHIP BLASTER FP21W HIGH PRESSURE COOLANT SYSTEM {UMP VOLTAGE: 230 PHASE: 3 FREQUENCY: 60 HZ FULL LOAD CURRENT: 4.7 LARGEST LOAD: 3.1"

BRIDGEPORT SERIES ONE W/ (2) JACOBS CHUCKS, POWERFEED, R-8 COLLETS - BRIDGEPORT SERIES ONE (6-X005) NEWALL DRO CONTROL, H.P: 1-1/2 PHASE: 3 CYCLE: 60 VOLTS: 230/460 RPM: 4200 EQUIPPED WITH: (2) JACOBS CHUCKS, BRIDGEPORT POWERFEED, R-8 COLLETS, BLOCKS, WORK LIGHT

RAMCO RS90P BANDSAW CUTTING CAPACITIES: ROUND @ 90 DEGREES: 8-1/2" RECTANGULAR @ 90 DEGREES: 8-1/2" X 13" BLADE: NUMBER OF SPEEDS: 3 SPEEDS: 55 / 108 / 153 SFPM BLADE SIZE: 1" X 0.032" X 115.5" BAND WHEEL: 12" DIAMETER

MILLER 320A-BP AC-DC INERT GAS WELDER. VOLTS: 208/230/460 AMPS:60/72/26 K.W: 14 K.V.A: 16.5 FREQUENCY: 50/60CY EQUIPPED WITH: CART

2014 CHIP BLASTER FP21W HIGH PRESSURE COOLANT SYSTEM {UMP VOLTAGE: 230 PHASE: 3 FREQUENCY: 60 HZ FULL LOAD CURRENT: 4.7 LARGEST LOAD: 3.1"

2010 OKUMA LU300 2SC600 CONTROL: OKUMA OSP-P200L. CHUCK SIZE 8" BAR CAPACITY 2.4" POWER 30 HP MAX RPM 5,000 RPM TURNING DIA 14.57" SWING 20.87" MACHINING LENGTH 23.6" TURNING DIAMETER 14.57 INCHES CENTER DISTANCE 23.6 INCHES BAR CAPACITY 2.4 INCHES SPINDLE NOSE A2-6 X/A (UPPER) AXIS TRAVEL 10.23 INCHES X/B (LOWER) AXIS TRAVEL 5.51 Z AXIS TRAVEL (UPPR TURRET) 25.2 INCHES Z AXIS TRAVEL (LWR TURRET) 24.21 RAPID TRAVERSE (X/Z) 787/984 MAIN MOTOR 30 HP SUB SPINDLE NO EQUIPPED WITH: POWER CHUCKS, P5C COLLECT DRAWBAR, (3) TOOLHOLDERS, CHIP CONVEYOR COOLANT TANK, TOOL PRESETTER

2014 CHIP BLASTER FP21W HIGH PRESSURE COOLANT SYSTEM {UMP VOLTAGE: 230 PHASE: 3 FREQUENCY: 60 HZ FULL LOAD CURRENT: 4.7 LARGEST LOAD: 3.1"

2010 OKUMA LU300 2MC600 LIVE TOOLING NEW KITAGAWA 10" CHUCK & 5C POWER DRAWBAR - 2010 OKUMA LU300 2MC600 CONTROL: OKUMA OSP-P200L. CHUCK SIZE 10" BAR CAPACITY 2.4" # AXIS (4 TURNING) # AXIS (1 MILLING C AXIS) POWER 30 HP MAX RPM 5,000 RPM TURNING DIA 14.57" SWING 20.87" MACHINING LENGTH 23.6" TURNING DIAMETER 14.57 INCHES CENTER DISTANCE 23.6 INCHES BAR CAPACITY 2.4 INCHES SPINDLE NOSE A2-6 X/A (UPPER) AXIS TRAVEL 10.23 INCHES X/B (LOWER) AXIS TRAVEL 5.51 Z AXIS TRAVEL (UPPR TURRET) 25.2 INCHES Z AXIS TRAVEL (LWR TURRET) 24.21 RAPID TRAVERSE (X/Z) 787/984 MAIN MOTOR 30 HP LIVE TOOLING YES VDI UPPER & LWR SUB SPINDLE NO EQUIPPED WITH: (3) LIVE TOOL HOLDERS, NEW KITAGAWA 10" B210 CHUCK WITH 5C POWER DRAWBAR

2010 OKUMA LB3000EX-M C500 C500 (2010) W/ TOOL HOLDERS AND C AXIS CONTROL: OKUMA OSP-P200L. SWING OVER BED: 22.8" SWING OVER CARRIAGE: 18.5" DISTANCE BETWEEN CENTERS: 20.47" MAX. TURNING DIAMETER X LENGTH: 13.39" X 19.69" SPINDLE DIAMETER: 4.72" SPINDLE NOSE: JIS A2-6 THROUGH-SPINDLE HOLE: 3.14" NO. OF SPINDLE SPEED RANGES: VARIABLE SPEED X AUTOMATIC 2-SPEED SPINDLE SPEED: 45 RPM - 5,000 RPM Z-AXIS TRAVEL: 22.2" TOOLING: V12 TURRET NO. OF TOOLS: 12 ROTARY TOOL SPINDLE SPEEDS (INFINITELY VARIABLE): 45 RPM - 6,000 RPM C-AXIS CONTROL ANGLE: 360 (0.001 INCREMENT) TAILSTOCK SPINDLE TAPER HOLE: #5MT TAILSTOCK TRAVEL: 20.28" TAILSTOCK MOTOR: 3.9 HP EQUIPPED WITH: (3) LIVE TOOL HOLDERS, BAR FEED, CHIP CONVEYOR, PARTS CATCHER, C-AXIS, TAILSTOCK

2010 OKUMA LB3000EX-W CONTROL: OKUMA OSP-P200L. SWING: 22.83 TURNING DIAMETER: 16.14 CENTER DISTANCE: 40.16 CHUCK SIZE: 12 BAR CAPACITY: 3.15 X-AXIS TRAVEL: 10.24 Z- AXIS TRAVEL: 41.93 RAPID TRAVERSE (X/Z): 984/1,181 IPM SPINDLE NOSE: A2-8 SPINDLE SPEED (RPM): 4,200 MAIN MOTOR: 30 HP DIMENSIONS: 135 X 74 X 80 WEIGHT: 13,200 POUNDS EQUIPPED WITH: (3) TOOL HOLDERS, SUB -SPINDLE, CHIP CONVEYOR

2010 OKUMA GP-26T CYLINDRICAL GRINDER CONTROL: OKUMA OSP-U10G. 12.99 SWING 25.6 DISTANCE BETWEEN CENTERS 110 LBS. MAX WORKPIECE WEIGHT 24 DIA X 2.95 WIDE GRINDING WHEEL 10HP SPINDLE MOTOR 8859 FPM PERIPHERAL WHEEL SPEED 12.59 X-AXIS WHEEL SLIDE TRAVEL 25.59 Z-AXIS TRAVEL 97.64 X 113 FLOOR SPACE REQUIRED 12,000 APPROX MACHINE WEIGHT EQUIPPED WITH: 1 TON JIB CRANE ATTACHMENT

MILLER CP-3VS WELDER VOLTS: 230/460 AMPS: 30/15 K.W.:11.6 K.V.A.: 11.9 EQUIPPED WITH: CART W/ WHEELS