Pelleting Equipment Consignment Auction PLUS 2 Complete Pellet Lines MULTISITE with 100 Lots

Schneider Industries

Category: MISC

Total Lots: 184

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 184 lots

Year	Make	Model	Lot Description	Hammer Price
2022	CME	MILL-HMA100G	2022 CME MILL-HMA100G HAMMER MILL \| SERIAL #: 220706. ALSO INCLUDES: 8FT. BY 12FT. CHANDLER SPREADER BED STAINLESS STEEL. NO SPINNERS ON IT. MESH CHAIN. REDLINE CONVEYORS 13FT, 2HP MOTOR AGGREGATE BELT. 21 FT. REDLINE CONVEYOR WITH AGGREGATE BELT. HYDRAULIC PUMP 150 GALLON TANK 25HP MOTOR. LOT OF (2) 18 FT CHORE-TIME SCREW AUGERS WITH 2 HP MOTORS. R-150 PELLET MILL, MODEL: MILL-R150 \| SERIAL #: 220203 \| YEAR: 2022. 28FT REDLINE CONVEYOR 2- HP MOTOR. PELLET COUNTERFLOW COOLER - MODEL: MILL-C12 \| SERIAL #: 220505 \| YEAR: 2022. SHAKER SCREEN, MODEL SCR-46 SHAKER SCREEN, 2 HP MOTOR. BUCKET ELEVATOR MODEL: MILL-BE14G \| SERIAL #: 220904 \| YEAR: 2022. SUPER BIN BAG FILLER STATION COMPLETE PELLETING LINE. 2022 · CME · MILL-HMA100G	🔒 Subscribe
2022		MILL-R150	2022 R-150 PELLET MILL, MODEL: MILL-R150, S/N: 220203. 200HP MOTOR INCLUDES: LIKE-NEW DIE, SET OF ROLLS, CONDITIONER, FORCE FEEDER, FEEDER, AUTOLUBE SYSTEM, CONTROL PANEL RUN TIME: APPROX. 250300 HOURS (POULTRY) 2022 · MILL-R150	🔒 Subscribe
2022		MILL-C12	2022 MILL-C12 PELLET COUNTERFLOW COOLER CYCLONE AND BLOWER WITH 15HP MOTOR TOP ROTARY AIRLOCK WITH MOTOR BOTTOM ROTARY AIRLOCK WITH MOTOR AND GEAR REDUCER UNIT INCLUDES A CONTROL PANEL UNIT RATED UP TO 12 TONS PER HOUR RUN TIME: APPROX. 250300 HOURS (POULTRY) S/N: 220505 2022 · MILL-C12	🔒 Subscribe
	CME	MILL-R150	CME PELLET MILL MILL-R150 INCLUDES 150HP MOTOR AND FORCE FEEDER WITH MOTOR. UNIT RAN LESS THAN 100 HOURS. S/N: 180206 CME · MILL-R150	🔒 Subscribe
2009	COLORADO MILL EQUIPMENT	R-30	2009 COLORADO MILL EQUIPMENT R-30 RING PELLET MILL. MODEL CF-3 COUNTER FLOW COOLER WITH SCREENER, CHROMALOX ELECTRIC STEAM BOILER, UNIVERSAL BUCKET ELEVATOR, UNIVERSAL BUCKET ELEVATOR, BAGGING BIN, INGREDIENT FEED BIN WITH AUGER DISCHARGE, INCLINE BELT CONVEYOR. COMPLETE PELLETING LINE LAST RUNNING CHICKEN FEED. 2009 · COLORADO MILL EQUIPMENT · R-30	🔒 Subscribe
	SPROUT WALDRON	501	PELLET MILL SPROUT M #501 SET WITH A NEW WEG 150HP 1200 RPM MOTOR. THIS UNIT IS BEEN SERVICED AND INCLUDED A NEW MOTOR WITH NEW MOTOR PULLEY, SET OF NEW MAIN BELTS, NEW CARTRIDGE, NEW BEARINGS, NEW REAR SCRAPERS, ROLLER FRONT PLATE, RIBBON DEFLECTOR, AND KNIFE ASSEMBLY. SPROUT WALDRON · 501	🔒 Subscribe
	SPROUT WALDRON	501D	501D SPROUT WALDRON PELLET MILL ONE MODEL 501D SPROUT WALDRON PELLET MILL, LESS MAIN MOTOR (CAN BE UP TO 150HP) FEEDER/CONDITIONER, ONE EXTRA SET OF ROLLER ASSEMBLIES, SIX 14 INCH PERF DIES (FOUR NEW, TWO USED). MILL HAS BEEN REMOVED AND READY TO SHIP. RIGGING PRICE: $0 APPROXIMATE FREIGHT TO TENNESSEE - $1,500.00, INCLUDING COST OF CUSTOMS BROKERIDGE. PELLET MILL WELL MAINTAINED BY ON SITE MILLWRIGHT. SPROUT WALDRON · 501D	🔒 Subscribe
2022	CME	MILL-HMA100G	2022 CME MILL-HMA100G HAMMER MILL S/N: 220706 100HP, 3600RPM MOTOR INCLUDES: 18" X 5.5" LARGE MAGNET, SCREEN, SET OF HAMMERS RUN TIME: APPROX. 250300 HOURS (POULTRY) INCLUDES A 100 HP, 3600 RPM MOTOR, 230/460 VOLTS 2022 · CME · MILL-HMA100G	🔒 Subscribe
			LIVE BOTTOM BIN.	🔒 Subscribe
			12 FT WIDE BY 55 FT TALL TOTAL HEIGHT CYCLONE. INCLUDES 17 INCH AIRLOCK. WEIGHS APPROXIMATELY 15,000 POUNDS. RATED UP TO 84,000 CFM. WILL REQUIRE EXTENDED WIDE LOAD TRAILER TO MOVE.	🔒 Subscribe
			20 FT GALVANIZED BUCKET ELEVATOR, 22 FT TALL WITH 20 FT DISCHARGE AND 7X5 BUCKETS INCLUDES 6'' AUGER AND AUGER BASE	🔒 Subscribe
	IMPERIAL	CYCLONE	IMPERIAL CYCLONE WITH AIRLOCK AND STAND. 7 FT WIDE AND AROUND 25 FT TALL. 84 INCHES IN DIAMETER, RATED UP TO 30,000 CFMS IMPERIAL · CYCLONE	🔒 Subscribe
	COLORADO MILLING EQUIPMENT	CF3	COLORADO MILLING EQUIPMENT CF3 COOLER, WITH AIR SYSTEM AND SCREENER MODEL #CF3 S/N #E15L15 THE BLOWER IS A 7.5HP, 450 VOLT, 3 PHASE MOTOR INCLUDES TOP AIR LOCK, CONTROL PANEL, SCREENER, CYCLONE, BLOWER AND CYCLONE AIRLOCK LAST RUNNING WOOD PELLETS AT 3 TONS PER HOUR. COLORADO MILLING EQUIPMENT · CF3	🔒 Subscribe
2009	COLORADO MILL EQUIPMENT	CF-3	2009 COLORADO MILL EQUIPMENT CF-3 COUNTER FLOW COOLER WITH SCREENER RATED AT 3 TONS PER HOUR INCLUDES PELLET COOLER, CYCLONE, BLOWER, DUCTWORK AND AIRLOCKS 2009 · COLORADO MILL EQUIPMENT · CF-3	🔒 Subscribe
2022		MILL-BE14G	2022 BUCKET ELEVATOR MILL-BE14G 14' GALVANIZED ELEVATOR WITH MOTOR RUN TIME: APPROX. 250300 HOURS (POULTRY) S/N: 220904 2022 · MILL-BE14G	🔒 Subscribe
	SQUARE D	MAIN BREAKER PANEL	1600 AMP SQUARE D MAIN BREAKER PANEL SQUARE D · MAIN BREAKER PANEL	🔒 Subscribe
2021	CME	BSM	2021 CME BSM BAG SCALE MANUAL BIN AND BAG FILLER STATION. THIS SYSTEM WAS LAST RUNNING RICE HULLS AND WHEAT BRAN. IT HAS LESS THAN 8,000 HOURS. S/N: 211708 2021 · CME · BSM	🔒 Subscribe
	REDLINE		28FT REDLINE CONVEYOR 2- HP MOTOR REDLINE	🔒 Subscribe
	REDLINE		REDLINE CONVEYORS 13FT, 2HP MOTOR AGGREGATE BELT REDLINE	🔒 Subscribe
2017	CME	MILL-HMS-VB-30	2017 CME HAMMER MILL MODEL: MILL-HMS-VB-30 S/N: 1706106 13' AUGER/MOTOR IT IS 4'X4'X4' AND THE AUGER IS APPROX. 13' 2017 · CME · MILL-HMS-VB-30	🔒 Subscribe
	SPROUT WALDRON	D1151	SPROUT WALDRON D1151 PELLET MILL COMES WITH 100 HP MOTOR, 575 VOLT, MODEL #501D SOFT START FOR MOTOR, NEW FEED CONE. ALMOST NEW ROLLERS, 1 NEW DIE, 1/8 INCH HOLE COMES WITH CONDITIONER SPROUT WALDRON · D1151	🔒 Subscribe
	RMS	ROLLER MILL	[10X30] [50HP MOTOR (1765 RPM, 230/460V)] DOUBLE PAIR ROLLER MILL, LAST RUNNING CORN AT 700 MICRONS RMS · ROLLER MILL	🔒 Subscribe
	BROADBENT	#7	BROADBENT BATCH CENTRIFUGAL #7, S/N #H92561 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN BROADBENT · #7	🔒 Subscribe
			38 FT BUCKET ELEVATOR WITH UPPER DECK. NEEDS BELT, BUCKETS, AND MOTOR. THE INSIDE DIMENSIONS OF THE ELEVATOR ARE 14 IN BY 39 IN. THE BUCKETS ARE MAXI TUFF 8X5 IN POLY BUCKETS. THE BELT IS 9 IN WIDE. IT WILL NEED NEW BUCKETS, BELT AND A MOTOR.	🔒 Subscribe
	ROTEX	21GP	ROTEX SCREENER MODEL #21GP, SERIAL NUMBER: 27964, TYPE: SINGLE DECK, SCREEN AREA: 40" X 84" WITH 1/4" SCREEN, MOTOR: 1HP, 1800 RPM. LAST USED FOR: SCREENING PELLETS. RATED CAPACITY: UP TO 20 TONS PER HOUR (T/H). ROTEX · 21GP	🔒 Subscribe
			50 HORSEPOWER BLOWER 16 INCH OPENING. INCLUDES AN EXTRA BRAND NEW FAN BLADE.	🔒 Subscribe
			30HP GRINDER S/N: C-MM195241-FR11	🔒 Subscribe
			CHAIN DRAG 30' LONG 14' TALL S/N: Q2-D22-T4013GPE-40	🔒 Subscribe
			2 TON MIXER WITH SURGE HOPPER S/N #212180016	🔒 Subscribe
			BAGGING BIN DIMENSION IS 6X 6.6X 35= 5 CU.YD. CAPACITY	🔒 Subscribe
	MILL	BSM	MILL-BSM SUPER BIN BAG FILLER STATION BAG SCALE MANUAL RUN TIME: APPROX. 250300 HOURS (POULTRY) CAPABLE OF BAGGING SUPER SACKS AND 15125 LB BAGS S/N: 211718 MILL · BSM	🔒 Subscribe
		SCR-46	SHAKER SCREEN, MODEL SCR-46 SHAKER SCREEN, 2 HP MOTOR MODEL: SCR46 SERIAL #: 230310 SINGLE DECK SCREENER, 4' X 6' WITH 3/16" SCREEN OPERATED FOR LESS THAN 100 HOURS SCR-46	🔒 Subscribe
			21 FT. REDLINE CONVEYOR WITH AGGREGATE BELT	🔒 Subscribe
	SPX MARLEY	493 G	SPX MARLEY COOLING TOWER 493 G WITH A 36 TON COOLING CAPACITY. IT IS BRAND NEW-NEVER INSTALLED. 6' X 7'X 5' SPX MARLEY · 493 G	🔒 Subscribe
	CME	SCR2555DD	CME DOUBLE DECK SCREENER MODEL SCR2555DD, 3HP MOTOR S/N: 01.5010107 CME · SCR2555DD	🔒 Subscribe
	BROADBENT	BATCH CENTRIFUGAL	BROADBENT BATCH CENTRIFUGAL #1, S/N #H92431 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN BROADBENT · BATCH CENTRIFUGAL	🔒 Subscribe
	BROADBENT	#6	BROADBENT BATCH CENTRIFUGAL #6 S/N #H92436 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN BROADBENT · #6	🔒 Subscribe
	BROADBENT	BATCH CENTRIFUGAL #5	BROADBENT BATCH CENTRIFUGAL #5, S/N #H92435 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN BROADBENT · BATCH CENTRIFUGAL #5	🔒 Subscribe
	BROADBENT	#4	BROADBENT BATCH CENTRIFUGAL #4, S/N #H92434 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN BROADBENT · #4	🔒 Subscribe
	BROADBENT	#3	BROADBENT BATCH CENTRIFUGAL #3 S/N #H92433 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN BROADBENT · #3	🔒 Subscribe
	BROADBENT	#2	BROADBENT BATCH CENTRIFUGAL #2 S/N: H92432 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN BROADBENT · #2	🔒 Subscribe
	UNIVERSAL		UNIVERSAL BUCKET ELEVATOR UNIVERSAL	🔒 Subscribe
			UNIVERSAL BUCKET ELEVATOR	🔒 Subscribe
			INGREDIENT FEED BIN WITH AUGER DISCHARGE AUGER FEED BIN IS 910X 4X 5= 7 CU.YD. CAPACITY.	🔒 Subscribe
		222101	ELECTRICAL CABINET #2, MODEL #222101 WITH PLC, 30 HP VFD, 15 HP VFD, STARTERS FOR TWO 30 HP MOTORS, ONE 40 HP MOTOR, FOUR 3 HP MOTORS, ONE 1 HP MOTOR 222101	🔒 Subscribe
		223101	ELECTRICAL CABINET #1, MODEL #223101, PLC, 30 HP VFD, 7.5 HP VFD, 3 HP VFD, STARTERS FOR TWO 30 HP MOTORS, THREE 7.5 HP MOTORS, TWO 5 HP MOTORS, SEVEN 3 HP MOTORS 223101	🔒 Subscribe
2021	CME	RB1000	2021 CME MODEL #RB1000 RIBBON BLENDER S/N: 211006. THIS UNIT IS EQUIPPED WITH 3HP, 1800RPM, 230/460V MOTOR. THE UNIT WAS LAS RUNNING RICE HULLS AND WHEAT BRAN. IT HAS LESS THAN 8,000 HOURS. 2021 · CME · RB1000	🔒 Subscribe
	CHANDLER	SPREADER BED	8FT. BY 12FT. CHANDLER SPREADER BED STAINLESS STEEL. NO SPINNERS ON IT. MESH CHAIN. USED AS A FEEDER BED FOR FEEDING THE HAMMERMILL CHANDLER · SPREADER BED	🔒 Subscribe
	CME	ECO-10	CME ECO-10 PELLET MACHINE 10 HORSE POWER CME · ECO-10	🔒 Subscribe
	UNIVERSAL	C-3 ELEVATOR	UNIVERSAL MODEL C-3 ELEVATOR 20' TALL- 6"X4" METAL CUPS WITH 1 HP 3 PHASE MOTOR UNIVERSAL · C-3 ELEVATOR	🔒 Subscribe

Year	Make	Model	Description	Price
2022	CME	MILL-HMA100G	2022 CME MILL-HMA100G HAMMER MILL \| SERIAL #: 220706. ALSO INCLUDES: 8FT. BY 12FT. CHANDLER SPREADER BED STAINLESS STEEL. NO SPINNERS ON IT. MESH CHAIN. REDLINE CONVEYORS 13FT, 2HP MOTOR AGGREGATE BELT. 21 FT. REDLINE CONVEYOR WITH AGGREGATE BELT. HYDRAULIC PUMP 150 GALLON TANK 25HP MOTOR. LOT OF (2) 18 FT CHORE-TIME SCREW AUGERS WITH 2 HP MOTORS. R-150 PELLET MILL, MODEL: MILL-R150 \| SERIAL #: 220203 \| YEAR: 2022. 28FT REDLINE CONVEYOR 2- HP MOTOR. PELLET COUNTERFLOW COOLER - MODEL: MILL-C12 \| SERIAL #: 220505 \| YEAR: 2022. SHAKER SCREEN, MODEL SCR-46 SHAKER SCREEN, 2 HP MOTOR. BUCKET ELEVATOR MODEL: MILL-BE14G \| SERIAL #: 220904 \| YEAR: 2022. SUPER BIN BAG FILLER STATION COMPLETE PELLETING LINE.	🔒 Subscribe
2022		MILL-R150	2022 R-150 PELLET MILL, MODEL: MILL-R150, S/N: 220203. 200HP MOTOR INCLUDES: LIKE-NEW DIE, SET OF ROLLS, CONDITIONER, FORCE FEEDER, FEEDER, AUTOLUBE SYSTEM, CONTROL PANEL RUN TIME: APPROX. 250300 HOURS (POULTRY)	🔒 Subscribe
2022		MILL-C12	2022 MILL-C12 PELLET COUNTERFLOW COOLER CYCLONE AND BLOWER WITH 15HP MOTOR TOP ROTARY AIRLOCK WITH MOTOR BOTTOM ROTARY AIRLOCK WITH MOTOR AND GEAR REDUCER UNIT INCLUDES A CONTROL PANEL UNIT RATED UP TO 12 TONS PER HOUR RUN TIME: APPROX. 250300 HOURS (POULTRY) S/N: 220505	🔒 Subscribe
	CME	MILL-R150	CME PELLET MILL MILL-R150 INCLUDES 150HP MOTOR AND FORCE FEEDER WITH MOTOR. UNIT RAN LESS THAN 100 HOURS. S/N: 180206	🔒 Subscribe
2009	COLORADO MILL EQUIPMENT	R-30	2009 COLORADO MILL EQUIPMENT R-30 RING PELLET MILL. MODEL CF-3 COUNTER FLOW COOLER WITH SCREENER, CHROMALOX ELECTRIC STEAM BOILER, UNIVERSAL BUCKET ELEVATOR, UNIVERSAL BUCKET ELEVATOR, BAGGING BIN, INGREDIENT FEED BIN WITH AUGER DISCHARGE, INCLINE BELT CONVEYOR. COMPLETE PELLETING LINE LAST RUNNING CHICKEN FEED.	🔒 Subscribe
	SPROUT WALDRON	501	PELLET MILL SPROUT M #501 SET WITH A NEW WEG 150HP 1200 RPM MOTOR. THIS UNIT IS BEEN SERVICED AND INCLUDED A NEW MOTOR WITH NEW MOTOR PULLEY, SET OF NEW MAIN BELTS, NEW CARTRIDGE, NEW BEARINGS, NEW REAR SCRAPERS, ROLLER FRONT PLATE, RIBBON DEFLECTOR, AND KNIFE ASSEMBLY.	🔒 Subscribe
	SPROUT WALDRON	501D	501D SPROUT WALDRON PELLET MILL ONE MODEL 501D SPROUT WALDRON PELLET MILL, LESS MAIN MOTOR (CAN BE UP TO 150HP) FEEDER/CONDITIONER, ONE EXTRA SET OF ROLLER ASSEMBLIES, SIX 14 INCH PERF DIES (FOUR NEW, TWO USED). MILL HAS BEEN REMOVED AND READY TO SHIP. RIGGING PRICE: $0 APPROXIMATE FREIGHT TO TENNESSEE - $1,500.00, INCLUDING COST OF CUSTOMS BROKERIDGE. PELLET MILL WELL MAINTAINED BY ON SITE MILLWRIGHT.	🔒 Subscribe
2022	CME	MILL-HMA100G	2022 CME MILL-HMA100G HAMMER MILL S/N: 220706 100HP, 3600RPM MOTOR INCLUDES: 18" X 5.5" LARGE MAGNET, SCREEN, SET OF HAMMERS RUN TIME: APPROX. 250300 HOURS (POULTRY) INCLUDES A 100 HP, 3600 RPM MOTOR, 230/460 VOLTS	🔒 Subscribe
			LIVE BOTTOM BIN.	🔒 Subscribe
			12 FT WIDE BY 55 FT TALL TOTAL HEIGHT CYCLONE. INCLUDES 17 INCH AIRLOCK. WEIGHS APPROXIMATELY 15,000 POUNDS. RATED UP TO 84,000 CFM. WILL REQUIRE EXTENDED WIDE LOAD TRAILER TO MOVE.	🔒 Subscribe
			20 FT GALVANIZED BUCKET ELEVATOR, 22 FT TALL WITH 20 FT DISCHARGE AND 7X5 BUCKETS INCLUDES 6'' AUGER AND AUGER BASE	🔒 Subscribe
	IMPERIAL	CYCLONE	IMPERIAL CYCLONE WITH AIRLOCK AND STAND. 7 FT WIDE AND AROUND 25 FT TALL. 84 INCHES IN DIAMETER, RATED UP TO 30,000 CFMS	🔒 Subscribe
	COLORADO MILLING EQUIPMENT	CF3	COLORADO MILLING EQUIPMENT CF3 COOLER, WITH AIR SYSTEM AND SCREENER MODEL #CF3 S/N #E15L15 THE BLOWER IS A 7.5HP, 450 VOLT, 3 PHASE MOTOR INCLUDES TOP AIR LOCK, CONTROL PANEL, SCREENER, CYCLONE, BLOWER AND CYCLONE AIRLOCK LAST RUNNING WOOD PELLETS AT 3 TONS PER HOUR.	🔒 Subscribe
2009	COLORADO MILL EQUIPMENT	CF-3	2009 COLORADO MILL EQUIPMENT CF-3 COUNTER FLOW COOLER WITH SCREENER RATED AT 3 TONS PER HOUR INCLUDES PELLET COOLER, CYCLONE, BLOWER, DUCTWORK AND AIRLOCKS	🔒 Subscribe
2022		MILL-BE14G	2022 BUCKET ELEVATOR MILL-BE14G 14' GALVANIZED ELEVATOR WITH MOTOR RUN TIME: APPROX. 250300 HOURS (POULTRY) S/N: 220904	🔒 Subscribe
	SQUARE D	MAIN BREAKER PANEL	1600 AMP SQUARE D MAIN BREAKER PANEL	🔒 Subscribe
2021	CME	BSM	2021 CME BSM BAG SCALE MANUAL BIN AND BAG FILLER STATION. THIS SYSTEM WAS LAST RUNNING RICE HULLS AND WHEAT BRAN. IT HAS LESS THAN 8,000 HOURS. S/N: 211708	🔒 Subscribe
	REDLINE		28FT REDLINE CONVEYOR 2- HP MOTOR	🔒 Subscribe
	REDLINE		REDLINE CONVEYORS 13FT, 2HP MOTOR AGGREGATE BELT	🔒 Subscribe
2017	CME	MILL-HMS-VB-30	2017 CME HAMMER MILL MODEL: MILL-HMS-VB-30 S/N: 1706106 13' AUGER/MOTOR IT IS 4'X4'X4' AND THE AUGER IS APPROX. 13'	🔒 Subscribe
	SPROUT WALDRON	D1151	SPROUT WALDRON D1151 PELLET MILL COMES WITH 100 HP MOTOR, 575 VOLT, MODEL #501D SOFT START FOR MOTOR, NEW FEED CONE. ALMOST NEW ROLLERS, 1 NEW DIE, 1/8 INCH HOLE COMES WITH CONDITIONER	🔒 Subscribe
	RMS	ROLLER MILL	[10X30] [50HP MOTOR (1765 RPM, 230/460V)] DOUBLE PAIR ROLLER MILL, LAST RUNNING CORN AT 700 MICRONS	🔒 Subscribe
	BROADBENT	#7	BROADBENT BATCH CENTRIFUGAL #7, S/N #H92561 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN	🔒 Subscribe
			38 FT BUCKET ELEVATOR WITH UPPER DECK. NEEDS BELT, BUCKETS, AND MOTOR. THE INSIDE DIMENSIONS OF THE ELEVATOR ARE 14 IN BY 39 IN. THE BUCKETS ARE MAXI TUFF 8X5 IN POLY BUCKETS. THE BELT IS 9 IN WIDE. IT WILL NEED NEW BUCKETS, BELT AND A MOTOR.	🔒 Subscribe
	ROTEX	21GP	ROTEX SCREENER MODEL #21GP, SERIAL NUMBER: 27964, TYPE: SINGLE DECK, SCREEN AREA: 40" X 84" WITH 1/4" SCREEN, MOTOR: 1HP, 1800 RPM. LAST USED FOR: SCREENING PELLETS. RATED CAPACITY: UP TO 20 TONS PER HOUR (T/H).	🔒 Subscribe
			50 HORSEPOWER BLOWER 16 INCH OPENING. INCLUDES AN EXTRA BRAND NEW FAN BLADE.	🔒 Subscribe
			30HP GRINDER S/N: C-MM195241-FR11	🔒 Subscribe
			CHAIN DRAG 30' LONG 14' TALL S/N: Q2-D22-T4013GPE-40	🔒 Subscribe
			2 TON MIXER WITH SURGE HOPPER S/N #212180016	🔒 Subscribe
			BAGGING BIN DIMENSION IS 6X 6.6X 35= 5 CU.YD. CAPACITY	🔒 Subscribe
	MILL	BSM	MILL-BSM SUPER BIN BAG FILLER STATION BAG SCALE MANUAL RUN TIME: APPROX. 250300 HOURS (POULTRY) CAPABLE OF BAGGING SUPER SACKS AND 15125 LB BAGS S/N: 211718	🔒 Subscribe
		SCR-46	SHAKER SCREEN, MODEL SCR-46 SHAKER SCREEN, 2 HP MOTOR MODEL: SCR46 SERIAL #: 230310 SINGLE DECK SCREENER, 4' X 6' WITH 3/16" SCREEN OPERATED FOR LESS THAN 100 HOURS	🔒 Subscribe
			21 FT. REDLINE CONVEYOR WITH AGGREGATE BELT	🔒 Subscribe
	SPX MARLEY	493 G	SPX MARLEY COOLING TOWER 493 G WITH A 36 TON COOLING CAPACITY. IT IS BRAND NEW-NEVER INSTALLED. 6' X 7'X 5'	🔒 Subscribe
	CME	SCR2555DD	CME DOUBLE DECK SCREENER MODEL SCR2555DD, 3HP MOTOR S/N: 01.5010107	🔒 Subscribe
	BROADBENT	BATCH CENTRIFUGAL	BROADBENT BATCH CENTRIFUGAL #1, S/N #H92431 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN	🔒 Subscribe
	BROADBENT	#6	BROADBENT BATCH CENTRIFUGAL #6 S/N #H92436 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN	🔒 Subscribe
	BROADBENT	BATCH CENTRIFUGAL #5	BROADBENT BATCH CENTRIFUGAL #5, S/N #H92435 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN	🔒 Subscribe
	BROADBENT	#4	BROADBENT BATCH CENTRIFUGAL #4, S/N #H92434 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN	🔒 Subscribe
	BROADBENT	#3	BROADBENT BATCH CENTRIFUGAL #3 S/N #H92433 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN	🔒 Subscribe
	BROADBENT	#2	BROADBENT BATCH CENTRIFUGAL #2 S/N: H92432 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASKET DESIGNED FOR MAXIMUM SAFETY FULLY COMPLIANT WITH THE HIGHEST CURRENT STANDARDS UNIQUE CLEAN SCREEN DISCHARGE SYSTEM CUSTOM-DESIGNED MOTORS FOR HIGH CYCLE RATES SIMPLE MECHANICAL DESIGN	🔒 Subscribe
	UNIVERSAL		UNIVERSAL BUCKET ELEVATOR	🔒 Subscribe
			UNIVERSAL BUCKET ELEVATOR	🔒 Subscribe
			INGREDIENT FEED BIN WITH AUGER DISCHARGE AUGER FEED BIN IS 910X 4X 5= 7 CU.YD. CAPACITY.	🔒 Subscribe
		222101	ELECTRICAL CABINET #2, MODEL #222101 WITH PLC, 30 HP VFD, 15 HP VFD, STARTERS FOR TWO 30 HP MOTORS, ONE 40 HP MOTOR, FOUR 3 HP MOTORS, ONE 1 HP MOTOR	🔒 Subscribe
		223101	ELECTRICAL CABINET #1, MODEL #223101, PLC, 30 HP VFD, 7.5 HP VFD, 3 HP VFD, STARTERS FOR TWO 30 HP MOTORS, THREE 7.5 HP MOTORS, TWO 5 HP MOTORS, SEVEN 3 HP MOTORS	🔒 Subscribe
2021	CME	RB1000	2021 CME MODEL #RB1000 RIBBON BLENDER S/N: 211006. THIS UNIT IS EQUIPPED WITH 3HP, 1800RPM, 230/460V MOTOR. THE UNIT WAS LAS RUNNING RICE HULLS AND WHEAT BRAN. IT HAS LESS THAN 8,000 HOURS.	🔒 Subscribe
	CHANDLER	SPREADER BED	8FT. BY 12FT. CHANDLER SPREADER BED STAINLESS STEEL. NO SPINNERS ON IT. MESH CHAIN. USED AS A FEEDER BED FOR FEEDING THE HAMMERMILL	🔒 Subscribe
	CME	ECO-10	CME ECO-10 PELLET MACHINE 10 HORSE POWER	🔒 Subscribe
	UNIVERSAL	C-3 ELEVATOR	UNIVERSAL MODEL C-3 ELEVATOR 20' TALL- 6"X4" METAL CUPS WITH 1 HP 3 PHASE MOTOR	🔒 Subscribe

2022 CME MILL-HMA100G

MISC

2022 CME MILL-HMA100G HAMMER MILL | SERIAL #: 220706. ALSO INCLUDES: 8FT. BY 12FT. CHANDLER SPREADER...

Hammer Price: 🔒

2022 MILL-R150

MISC

2022 R-150 PELLET MILL, MODEL: MILL-R150, S/N: 220203. 200HP MOTOR INCLUDES: LIKE-NEW DIE, SET OF RO...

Hammer Price: 🔒

2022 MILL-C12

FOOD PROCESSING AND RESTAURANT EQUIPMENT

2022 MILL-C12 PELLET COUNTERFLOW COOLER CYCLONE AND BLOWER WITH 15HP MOTOR TOP ROTARY AIRLOCK WITH M...

Hammer Price: 🔒

CME MILL-R150

FOOD PROCESSING AND RESTAURANT EQUIPMENT

CME PELLET MILL MILL-R150 INCLUDES 150HP MOTOR AND FORCE FEEDER WITH MOTOR. UNIT RAN LESS THAN 100 H...

Hammer Price: 🔒

2009 COLORADO MILL EQUIPMENT R-30

PACKAGING EQUIPMENT

2009 COLORADO MILL EQUIPMENT R-30 RING PELLET MILL. MODEL CF-3 COUNTER FLOW COOLER WITH SCREENER, CH...

Hammer Price: 🔒

SPROUT WALDRON 501

PACKAGING EQUIPMENT

PELLET MILL SPROUT M #501 SET WITH A NEW WEG 150HP 1200 RPM MOTOR. THIS UNIT IS BEEN SERVICED AND IN...

Hammer Price: 🔒

SPROUT WALDRON 501D

MISC

501D SPROUT WALDRON PELLET MILL ONE MODEL 501D SPROUT WALDRON PELLET MILL, LESS MAIN MOTOR (CAN BE U...

Hammer Price: 🔒

2022 CME MILL-HMA100G

MISC

2022 CME MILL-HMA100G HAMMER MILL S/N: 220706 100HP, 3600RPM MOTOR INCLUDES: 18" X 5.5" LARGE MAGNET...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

LIVE BOTTOM BIN....

Hammer Price: 🔒

DUST COLLECTION EQUIPMENT

12 FT WIDE BY 55 FT TALL TOTAL HEIGHT CYCLONE. INCLUDES 17 INCH AIRLOCK. WEIGHS APPROXIMATELY 15,000...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

20 FT GALVANIZED BUCKET ELEVATOR, 22 FT TALL WITH 20 FT DISCHARGE AND 7X5 BUCKETS INCLUDES 6'' AUGER...

Hammer Price: 🔒

IMPERIAL CYCLONE

DUST COLLECTION EQUIPMENT

IMPERIAL CYCLONE WITH AIRLOCK AND STAND. 7 FT WIDE AND AROUND 25 FT TALL. 84 INCHES IN DIAMETER, RAT...

Hammer Price: 🔒

COLORADO MILLING EQUIPMENT CF3

MISC

COLORADO MILLING EQUIPMENT CF3 COOLER, WITH AIR SYSTEM AND SCREENER MODEL #CF3 S/N #E15L15 THE BLOWE...

Hammer Price: 🔒

2009 COLORADO MILL EQUIPMENT CF-3

FOOD PROCESSING AND RESTAURANT EQUIPMENT

2009 COLORADO MILL EQUIPMENT CF-3 COUNTER FLOW COOLER WITH SCREENER RATED AT 3 TONS PER HOUR INCLUDE...

Hammer Price: 🔒

2022 MILL-BE14G

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

2022 BUCKET ELEVATOR MILL-BE14G 14' GALVANIZED ELEVATOR WITH MOTOR RUN TIME: APPROX. 250300 HOURS (P...

Hammer Price: 🔒

SQUARE D MAIN BREAKER PANEL

ELECTRICAL AND POWER GENERATION EQUIPMENT

1600 AMP SQUARE D MAIN BREAKER PANEL...

Hammer Price: 🔒

2021 CME BSM

PACKAGING EQUIPMENT

2021 CME BSM BAG SCALE MANUAL BIN AND BAG FILLER STATION. THIS SYSTEM WAS LAST RUNNING RICE HULLS AN...

Hammer Price: 🔒

REDLINE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

28FT REDLINE CONVEYOR 2- HP MOTOR...

Hammer Price: 🔒

REDLINE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

REDLINE CONVEYORS 13FT, 2HP MOTOR AGGREGATE BELT...

Hammer Price: 🔒

2017 CME MILL-HMS-VB-30

MISC

2017 CME HAMMER MILL MODEL: MILL-HMS-VB-30 S/N: 1706106 13' AUGER/MOTOR IT IS 4'X4'X4' AND THE AUGER...

Hammer Price: 🔒

SPROUT WALDRON D1151

PLASTICS PROCESSING EQUIPMENT

SPROUT WALDRON D1151 PELLET MILL COMES WITH 100 HP MOTOR, 575 VOLT, MODEL #501D SOFT START FOR MOTOR...

Hammer Price: 🔒

RMS ROLLER MILL

FOOD PROCESSING AND RESTAURANT EQUIPMENT

[10X30] [50HP MOTOR (1765 RPM, 230/460V)] DOUBLE PAIR ROLLER MILL, LAST RUNNING CORN AT 700 MICRONS...

Hammer Price: 🔒

BROADBENT #7

MISC

BROADBENT BATCH CENTRIFUGAL #7, S/N #H92561 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BAS...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

38 FT BUCKET ELEVATOR WITH UPPER DECK. NEEDS BELT, BUCKETS, AND MOTOR. THE INSIDE DIMENSIONS OF THE ...

Hammer Price: 🔒

ROTEX 21GP

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

ROTEX SCREENER MODEL #21GP, SERIAL NUMBER: 27964, TYPE: SINGLE DECK, SCREEN AREA: 40" X 84" WITH 1/4...

Hammer Price: 🔒

DUST COLLECTION EQUIPMENT

50 HORSEPOWER BLOWER 16 INCH OPENING. INCLUDES AN EXTRA BRAND NEW FAN BLADE....

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

30HP GRINDER S/N: C-MM195241-FR11...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CHAIN DRAG 30' LONG 14' TALL S/N: Q2-D22-T4013GPE-40...

Hammer Price: 🔒

CHEMICAL PROCESSING EQUIPMENT

2 TON MIXER WITH SURGE HOPPER S/N #212180016...

Hammer Price: 🔒

MISC

BAGGING BIN DIMENSION IS 6X 6.6X 35= 5 CU.YD. CAPACITY...

Hammer Price: 🔒

MILL BSM

PACKAGING EQUIPMENT

MILL-BSM SUPER BIN BAG FILLER STATION BAG SCALE MANUAL RUN TIME: APPROX. 250300 HOURS (POULTRY) CAPA...

Hammer Price: 🔒

SCR-46

MISC

SHAKER SCREEN, MODEL SCR-46 SHAKER SCREEN, 2 HP MOTOR MODEL: SCR46 SERIAL #: 230310 SINGLE DECK SCRE...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

21 FT. REDLINE CONVEYOR WITH AGGREGATE BELT...

Hammer Price: 🔒

SPX MARLEY 493 G

INDUSTRIAL AND COOLING HEATING EQUIPMENT

SPX MARLEY COOLING TOWER 493 G WITH A 36 TON COOLING CAPACITY. IT IS BRAND NEW-NEVER INSTALLED. 6' X...

Hammer Price: 🔒

CME SCR2555DD

MISC

CME DOUBLE DECK SCREENER MODEL SCR2555DD, 3HP MOTOR S/N: 01.5010107...

Hammer Price: 🔒

BROADBENT BATCH CENTRIFUGAL

MISC

BROADBENT BATCH CENTRIFUGAL #1, S/N #H92431 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BAS...

Hammer Price: 🔒

BROADBENT #6

MISC

BROADBENT BATCH CENTRIFUGAL #6 S/N #H92436 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASK...

Hammer Price: 🔒

BROADBENT BATCH CENTRIFUGAL #5

CHEMICAL PROCESSING EQUIPMENT

BROADBENT BATCH CENTRIFUGAL #5, S/N #H92435 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BAS...

Hammer Price: 🔒

BROADBENT #4

MISC

BROADBENT BATCH CENTRIFUGAL #4, S/N #H92434 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BAS...

Hammer Price: 🔒

BROADBENT #3

MISC

BROADBENT BATCH CENTRIFUGAL #3 S/N #H92433 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASK...

Hammer Price: 🔒

BROADBENT #2

MISC

BROADBENT BATCH CENTRIFUGAL #2 S/N: H92432 COMES WITH ABB INDUSTRIAL CONTROL PANEL KEY FEATURES BASK...

Hammer Price: 🔒

UNIVERSAL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

UNIVERSAL BUCKET ELEVATOR...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

UNIVERSAL BUCKET ELEVATOR...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

INGREDIENT FEED BIN WITH AUGER DISCHARGE AUGER FEED BIN IS 910X 4X 5= 7 CU.YD. CAPACITY....

Hammer Price: 🔒

222101

ELECTRICAL AND POWER GENERATION EQUIPMENT

ELECTRICAL CABINET #2, MODEL #222101 WITH PLC, 30 HP VFD, 15 HP VFD, STARTERS FOR TWO 30 HP MOTORS, ...

Hammer Price: 🔒

223101

ELECTRICAL AND POWER GENERATION EQUIPMENT

ELECTRICAL CABINET #1, MODEL #223101, PLC, 30 HP VFD, 7.5 HP VFD, 3 HP VFD, STARTERS FOR TWO 30 HP M...

Hammer Price: 🔒

2021 CME RB1000

CHEMICAL PROCESSING EQUIPMENT

2021 CME MODEL #RB1000 RIBBON BLENDER S/N: 211006. THIS UNIT IS EQUIPPED WITH 3HP, 1800RPM, 230/460V...

Hammer Price: 🔒

CHANDLER SPREADER BED

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

8FT. BY 12FT. CHANDLER SPREADER BED STAINLESS STEEL. NO SPINNERS ON IT. MESH CHAIN. USED AS A FEEDER...

Hammer Price: 🔒

CME ECO-10

PLASTICS PROCESSING EQUIPMENT

CME ECO-10 PELLET MACHINE 10 HORSE POWER...

Hammer Price: 🔒

UNIVERSAL C-3 ELEVATOR

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

UNIVERSAL MODEL C-3 ELEVATOR 20' TALL- 6"X4" METAL CUPS WITH 1 HP 3 PHASE MOTOR...

Hammer Price: 🔒

1 2 3 4 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Pelleting Equipment Consignment Auction PLUS 2 Complete Pellet Lines MULTISITE with 100 Lots

Save to Project Folder

Print Options

Save to Project Folder