PROCESS MANUFACTURING AND PLANT SUPPORT EQUIPMENT FROM A GLOBAL COMPANY
Category: CHEMICAL PROCESSING EQUIPMENT
Total Lots:
267
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
ZANCHETTA (IMA) | CANGURO TUMBLER, MODEL 500 FS, SERIES 2000 |
ZANCHETTA (IMA) CANGURO TUMBLER, MODEL 500 FS, SERIES 2000 BIN BLENDER, STAINLESS STEEL. BIN ARM, BASE PLATE, PEDESTAL, DRIVE COVERS AND OPERATOR PANELS, DESIGNED TO HANDLE BINS FROM 300- 600 LITER CAPACITY, 48" X 48" PLATFORM, 480 VOLT, 48" X 48" X 61" HIGH BIN PLATFORM, (4) 400 LITER ZANCHETTA BINS, APPROXIMATELY 36" X 36" X 7" STRAIGHT SIDE X 24" CONE BOTTOM, CONTROL PANEL WITH VFD AND OPERATOR PANEL
|
🔒 Subscribe | |
|
|
NORMAG | 2-1/2" GEAR PUMP |
NORMAG 2-1/2" GEAR PUMP. INCLUDES DRIVE
|
🔒 Subscribe | |
|
|
DYNAMIC AIR BLENDER SYSTEM. CONSISTING OF: OPERATOR CONTROL PANEL, COMPRESSED AIR TANK, AND A SILO, APPROXIMATE 56" DIAMETER X 144" OVERALL HEIGHT. LAST USED FOR BLENDING PELLETS POST CLASSIFICATION IN PELLETIZING LINE, AND DEPOSITING BLENDED PELLETS INTO A GAYLORD BOX. OVERALL LENGTH (HEIGHT) CURRENTLY IS 16'6" PLUS THE TORCHED-OFF LEG SECTIONS NEXT TO IT ARE 6' LONG. SO THE TOTAL HEIGHT IS APPROXIMATE 22'6" TALL WHEN RE-ASSEMBLED.
|
🔒 Subscribe | |||
|
|
2002 | MACROPLAST EXTRUSION TECNOLOGY | ME-2-45026A1S-080-AC200V5 |
2002 MACROPLAST EXTRUSION TECNOLOGY ME-2-45026A1S-080-AC200V5 EXTRUDER, 36:1 L/D, ELECTRICALLY HEATED, AIR COOLED, WITH 200 HP 575 VOLT 60 HZ MOTOR, 1785 RPM, 27.5:1 GEARBOX RATIO, 24" CENTERLINE HEIGHT, WITH MANUAL SCREEN CHANGER, FEED HOPPER, CONTROL PANEL WITH (4) BARREL, (1) SCREEN CHANGER, (1) FLANGE AND (1) ADAPTER TEMPERATURE CONTROLLERS, S/N: CPI-9015
|
🔒 Subscribe |
|
|
FES | 480E |
FES 480E CHILLER. AMMONIA REFRIGERANT SCREW COMPRESSOR, 600 HP, 3/60/4000 VOLT, 3600 RPM MOTOR. 255 TR ON NH3, BASE ON -14 DEGREES F EVAPORATOR TEMPERATURE, 30 DEGREES F ECONOMIZER TEMPERATURE, 101 DEGREES F CONDENSING TEMPERATURE. DUAL OIL FILTERS WITH AN OIL COOLER, SKID MOUNTED. INCLUDES A RECEIVER CONDENSER SKID. SERIAL #92532373
|
🔒 Subscribe | |
|
|
FES | 480E |
FES 480E CHILLER. AMMONIA REFRIGERANT SCREW COMPRESSOR, 600 HP, 3/60/4000 VOLT, 3600 RPM MOTOR. DUAL OIL FILTERS WITH AN OIL COOLER, SKID MOUNTED. INCLUDES A RECEIVER CONDENSOR SKID. S/N: 2532331; PRIMARY MATERIAL OF CONSTRUCTION: CS;
|
🔒 Subscribe | |
|
|
FES | 480E |
FES 480E CHILLER. AMMONIA REFRIGERANT SCREW COMPRESSOR, 1250-625 HP, 3/60/4000 VOLT, 3600 RPM MOTOR. DUAL OIL FILTERS WITH AN OIL COOLER, SKID MOUNTED. INCLUDES A RECEIVER CONDENSER SKID. SERIAL #92392041; S/N: 92392042; PRIMARY MATERIAL OF CONSTRUCTION: CS;
|
🔒 Subscribe | |
|
|
2004 | LEE INDUSTRIES | 50 U7S |
2004 LEE INDUSTRIES 50 U7S TRIPLE AGITATED KETTLE, 50 GALLON. 316L STAINLESS STEEL. APPROXIMATE 30" DIAMETER X 12" STRAIGHT SIDE. REMOVABLE DISHED TOP. INTERNAL RATED FULL VACUUM. 304 STAINLESS JACKET RATED 100 PSI @ 338 F. TOP MOUNTED ANCHOR STYLE AGITATOR WITH MOTOR, OFF CENTER ROSS HSM 510 EMULSIFIER WITH 10 HP MOTOR DRIVE, OFF CENTER TURBINE STYLE AGITATOR WITH 1HP MOTOR DRIVE. MOUNTED ON LEGS. NATIONAL BOARD# 9948, S/N: 34960-5-5
|
🔒 Subscribe |
|
|
2004 | LEE INDUSTRIES | 50 U7S |
2004 LEE INDUSTRIES 50 U7S TRIPLE AGITATED KETTLE, 50 GALLON. 316L STAINLESS STEEL. APPROXIMATE 30" DIAMETER X 12" STRAIGHT SIDE. REMOVABLE DISHED TOP. INTERNAL RATED FULL VACUUM. 304 STAINLESS JACKET RATED 100 PSI @ 338 F. TOP MOUNTED ANCHOR STYLE AGITATOR WITH MOTOR, OFF CENTER ROSS HSM 510 EMULSIFIER WITH 10 HP MOTOR DRIVE, OFF CENTER TURBINE STYLE AGITATOR WITH 1HP MOTOR DRIVE. MOUNTED ON LEGS. NATIONAL BOARD# 9949, S/N: 34960-5-6
|
🔒 Subscribe |
|
|
1995 | DESPATCH | GWB*78X150X50 |
1995 DESPATCH GWB*78X150X50 PASS THRU CART OVEN, STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 50" WIDE X 78" HIGH X 150" LONG INTERNAL CHAMBER DIMENSIONS, PASS THRU DESIGN WITH DUAL DOORS ON EACH END. STEAM HEATED, MAXIMUM TEMPERATURE 150 DEGREES F., OPERATING TEMPERATURE 104 DEGREES F. 642,700 BTU RATED, 120 VOLT CONTROL, 480 VOLT LINE. S/N: 154233
|
🔒 Subscribe |
|
|
RUSSEL FINEX | 16300 |
RUSSEL FINEX 16300 SIEVE, STAINLESS STEEL CONSTRUCTION. BASE MOUNTED. S/N: A1906
|
🔒 Subscribe | |
|
|
DESPATCH | GWB*78X150X50 |
DESPATCH GWB*78X150X50 PASS THRU CART OVEN, STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 50" WIDE X 78" HIGH X 150" LONG INTERNAL CHAMBER DIMENSIONS, PASS THRU DESIGN WITH DUAL DOORS ON EACH END. STEAM HEATED, MAXIMUM TEMPERATURE 150 DEGREES F., OPERATING TEMPERATURE 104 DEGREES F. 642,700 BTU RATED, 120 VOLT CONTROL, 480 VOLT LINE. S/N: 154234
|
🔒 Subscribe | |
|
|
PATTERSON-KELLEY | TWIN SHELL DRY V-BLENDER |
PATTERSON-KELLEY TWIN SHELL DRY V-BLENDER WITH PIN BAR. 75 CUBIC FOOT, STAINLESS STEEL CONSTRUCTION. MAXIMUM MATERIAL DENSITY 60 POUND/CUBIC FOOT. SHELL DRIVEN BY A 10 HP, 3/60/230/460 VOLT, 1774 RPM RPM GEAR MOTOR. SERIAL # C425287
|
🔒 Subscribe | |
|
|
FES | 480E |
FES 480E CHILLER. AMMONIA REFRIGERANT SCREW COMPRESSOR, 1250-625 HP, 3/60/4000 VOLT, 3600 RPM MOTOR. DUAL OIL FILTERS WITH AN OIL COOLER, SKID MOUNTED. INCLUDES A RECEIVER CONDENSER SKID. S/N: 92392042; PRIMARY MATERIAL OF CONSTRUCTION: CS; NATIONAL BOARD #:
|
🔒 Subscribe | |
|
|
FRISTAM | 742-180 |
FRISTAM CENTRIFUGAL PUMP, MODEL 742-180, 2.5" X 2", STAINLESS STEEL CONSTRUCTION. DIRECT COUPLED 15 HP, 230/460 VOLT, 3500 RPM MOTOR. SERIAL# FPX7420201256
|
🔒 Subscribe | |
|
|
UNITED UTENSIL |
UNITED UTENSIL TOTE BIN, 16 CUBIC FEET, 304 STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 52" DIAMETER X 42" DEEP CONE, FLAT TOP. MOUNTED ON PORTABLE STAND
|
🔒 Subscribe | ||
|
|
GRUENBERG OVEN CO. | T18HX74.35AA |
GRUENBERG OVEN CO. T18HX74.35AA CART OVEN. STAINLESS STEEL, APPROXIMATE 74 CUBIC FEET CAPACITY. 2-CART CAPACITY. APPROX. 74"H X 46"W X 38"D (I.D.), APPROX. 114"H X 70"W X 112"D (O.D.), 480V, 3 PH. S/N:28342
|
🔒 Subscribe | |
|
|
BIOLAB |
BIOLAB REVERSE OSMOSIS SYSTEM, STAINLESS STEEL CONSTRUCTION. (4) APPROXIMATELY 8" DIAMETER X 120" LONG FILTER TUBES. SKID MOUNTED WITH 20 HP GRUNDFOS PUMP, (2) BED MULTI MEDIA SKID, SINGLE BED CARBON FILTER SKID WITH SLURRY TANK, 5.5KW GRUNDFOS PUMP, CARTRIDGE FILTER HOUSING, AND (2) U TUBE HEAT EXCHANGERS. S/N: RO-38-7052
|
🔒 Subscribe | ||
|
|
MILNOR | 42026QHP |
MILNOR 42026QHP INDUSTRIAL WASHING MACHINE. 135 POUND CAPACITY. 780 RPM, 480 VOLT. S/N: 6451301
|
🔒 Subscribe | |
|
|
1998 | GRAHAM | GPE-85 |
1998 GRAHAM GPE-85 PLATE HEAT EXCHANGER, 3771 SQUARE FEET. STAINLESS STEEL PLATES RATED 150 PSI AT 200 DEGREES F. S/N: 98-36256-01
|
🔒 Subscribe |
|
|
GRUENBERG | T18HS74.35SS |
GRUENBERG T18HS74.35SS OVEN. STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 74 CUBIC FEET CAPACITY. SINGLE DOOR. STEAM HEATED. 34,500 BTU. 55 DEGREES C (131 F) TEMPERATURE LIMIT. 460 VOLT. S/N: 27357
|
🔒 Subscribe | |
|
|
MATCON |
MATCON STORAGE BIN, STAINLESS STEEL CONSTRUCTION. CONE BOTTOM WITH VALVE DISCHARGE. S/N: 1297
|
🔒 Subscribe | ||
|
|
FRISTAM | 742-180 |
FRISTAM CENTRIFUGAL PUMP, MODEL 742-180, 2.5" X 2", STAINLESS STEEL CONSTRUCTION. DIRECT COUPLED 15 HP, 230/460 VOLT, 3500 RPM MOTOR. SERIAL# FPX7420201261
|
🔒 Subscribe | |
|
|
BIOLAB |
BIOLAB REVERSE OSMOSIS SYSTEM, STAINLESS STEEL CONSTRUCTION. (4) APPROXIMATELY 8" DIAMETER X 120" LONG FILTER TUBES. SKID MOUNTED WITH 20 HP GRUNDFOS PUMP, (2) BED MULTI MEDIA SKID, SINGLE BED CARBON FILTER SKID WITH SLURRY TANK, 5.5KW GRUNDFOS PUMP, CARTRIDGE FILTER HOUSING, AND (2) U TUBE HEAT EXCHANGERS. S/N: RO-38-7051
|
🔒 Subscribe | ||
|
|
1998 | GRAHAM | GPE-85 |
1998 GRAHAM GPE-85 PLATE HEAT EXCHANGER, 3771 SQUARE FEET. STAINLESS STEEL PLATES RATED 150 PSI AT 200 DEGREES F. S/N: 98-37087-01
|
🔒 Subscribe |
|
|
50 GALLON DTW GLASS LINED 3 BLADE RETREAT CURVE AGITATOR. 44" LONG X 1.5" DIAMETER X 20" SPAN. PRIMARY MATERIAL OF CONSTRUCTION: CS
|
🔒 Subscribe | |||
|
|
50 GALLON DTW GLASS LINED 3 BLADE RETREAT CURVE AGITATOR. 44" LONG X 1.5" DIAMETER X 20" SPAN.; PRIMARY MATERIAL OF CONSTRUCTION: CS
|
🔒 Subscribe | |||
|
|
SADE | P4 MODEL 264/9 |
SADE P4 MODEL 264/9 TABLET WEIGHT INSPECTION SYSTEM
|
🔒 Subscribe | |
|
|
SADE | P4 MODEL 264/9 |
SADE P4 MODEL 264/9 TABLET WEIGHT INSPECTION SYSTEM
|
🔒 Subscribe | |
|
|
SADE | P4 MODEL 264/9 |
SADE P4 MODEL 264/9 TABLET WEIGHT INSPECTION SYSTEM
|
🔒 Subscribe | |
|
|
2001 | GLATT | GPCG 30 |
2001 GLATT GPCG 30 FLUID BED DRYER GRANULATOR. STAINLESS STEEL CONSTRUCTION, RATED 10 BAR SHOCK PROTECTION, WITH 65 LITER AND 125 LITER TOP SPRAY GRANULATION BOWLS WITH EXPANSION CHAMBER, ROTO GRANULATION INSERT, GLATT SPRAY PUMP SYSTEM, AIR HANDLING UNIT WITH HEPA, S/N: 7090
|
🔒 Subscribe |
|
|
GEMCO | GLB |
GEMCO GLB SLANT CONE BLENDER (.017) CUBIC FEET (.5 LITER), STAINLESS STEEL, BENCH TOP CANTILEVERED DESIGN, RATED 65#/CUBIC FOOT MAX MATERIAL DENSITY, 1/2 HP 115 VOLT MOTOR WITH AC INVERTER, 38-72 RPM, S/N: GLB25921
|
🔒 Subscribe | |
|
|
SADE | P4 MODEL 264/9 |
SADE P4 MODEL 264/9 TABLET WEIGHT INSPECTION SYSTEM
|
🔒 Subscribe | |
|
|
GLATT | GPCG-30 |
GLATT GPCG-30 18" WURSTER
|
🔒 Subscribe | |
|
|
GEA COLLETTE | GRAL 75 |
GEA COLLETTE GRAL 75 HIGH SHEAR MIXER. STAINLESS STEEL CONSTRUCTION, 75 LITER CAPACITY (MISSING BOWL). DUAL AGITATION...
|
🔒 Subscribe | |
|
|
2000 GALLON DTW GLASS LINED 3 BLADE RETREAT CURVE AGITATOR. 146" LONG X 5" DIAMETER X 44" SPAN.
|
🔒 Subscribe | |||
|
|
COLLETTE | GRAL1200 |
COLLETTE GRAL1200 STAINLESS STEEL MIXER/GRANULATOR. MAXIMUM CAPACITY APPROXIMATELY 1200 LITRE WITH WORKING CAPACITY BETWEEN 400 AND 800 LITRE APPROXIMATELY. MIXING BOWL BUILT IN 316L STAINLESS STEEL. HAS 316L STAINLESS STEEL THREE BLADE MIXER DRIVEN BY 55KW MOTOR AND (1) 316L STAINLESS STEEL CHOPPER WITH (4) KNIVES DRIVEN BY 8KW/12KW MOTOR. 316L STAINLESS STEEL LID WHICH IS FIXED IN POSITION, HYDRAULIC POWERPACK FOR RAISE AND LOWER OF PRODUCT BOWL. UNIT IS MOUNTED ON FRAME. S/N: 97GRI-1200 0018
|
🔒 Subscribe | |
|
|
CARL CANZLER |
CARL CANZLER APPROXIMATELY 4,500 LITRE CAPACITY HASTELLOY B2 VERTICAL REACTOR. UNIT MEASURES APPROXIMATELY 1800MM DIAMETER X 1400MM STRAIGHT SIDE. UNIT HAS WELDED DISHED TOP AND BOTTOM HEADS. INTERNAL RATED 10/20.7 BAR DESIGN PRESSURE AT -20 TO 200C. EXTERNAL MILD STEEL JACKET RATED 6.9 BAR DESIGN PRESSURE AT -20 TO 200C. UNIT HAS TOP ENTRY 4-BLADE AGITATOR DRIVEN BY A MOTOR. UNIT MOUNTED ON LUGS. S/N:16231
|
🔒 Subscribe | ||
|
|
BOLZ |
BOLZ APPROXIMATELY 14.5 SQUARE METER 316L STAINLESS STEEL HORIZONTAL SHELL AND U-TUBE HEAT EXCHANGER. HAS (220) 15MM X 1400MM LONG STAINLESS STEEL TUBES 56.2 LITRE CAPACITY RATED 6 BAR DESIGN PRESSURE AT 140C. STAINLESS STEEL SHELL 110 LITRE CAPACITY RATED 10 BAR DESIGN PRESSURE AT 140C. HAS (2) BOLTED STAINLESS STEEL HEADS. MOUNTED ON (2) SADDLES. S/NM-1462/6
|
🔒 Subscribe | ||
|
|
BUCKLEY & TAYLOR |
BUCKLEY & TAYLOR APPROXIMATELY 3 SQUARE METER STAINLESS STEEL HORIZONTAL SHELL AND TUBE HEAT EXCHANGER. HAS (21) 19MM OUTSIDE DIAMETER X 2400MM LONG STAINLESS STEEL TUBES RATED 7 BAR DESIGN PRESSURE AT -50/+50C. APPROXIMATELY 230MM DIAMETER X 2400MM LONG STAINLESS STEEL SHELL RATED 2 BAR DESIGN PRESSURE AT -50/+70C. HAS BOLTED STAINLESS STEEL HEADS, 4-PASS DESIGN. MOUNTED ON (2) SADDLES. LAST USED AS VACUUM DISCHARGE CONDENSER. S/N:7242
|
🔒 Subscribe | ||
|
|
REGLASSED 1500 GALLON DTW GLASS LINED DOUBLE STAGE TURBINE BLADES. 130" LONG X 3" DIAMETER X 28" SPAN.; PRIMARY MATERIAL OF CONSTRUCTION: CS; NATIONAL BOARD #:
|
🔒 Subscribe | |||
|
|
1000 GALLON DTW GLASS LINED DOUBLE STAGE TURBINE BLADES. 117" LONG X 3.5" DIAMETER X 28" SPAN.; PRIMARY MATERIAL OF CONSTRUCTION: CS;
|
🔒 Subscribe | |||
|
|
WESTFALIA | CA221-110 |
WESTFALIA CA221-110 STAINLESS STEEL DECANTER CENTRIFUGE. BOWL 220MM/125MM DIAMETER. BELT DRIVEN BY 11 KW 380 VOLT 3/50 2910 RPM MOTOR AT MAXIMUM 4350 RPM. SOLIDS MAXIMUM 4.3 KG/DM3. RATED CAPACITY 7,000 L/H DEPENDING ON APPLICATION. S/N:1682195
|
🔒 Subscribe | |
|
|
SAPPHIRE ENGINEERING |
SAPPHIRE ENGINEERING APPROXIMATELY 150 LITRE CAPACITY VERTICAL 316L STAINLESS STEEL RECEIVER VESSEL. UNIT HAS CLAMPED DISHED TOP AND WELDED DISHED BOTTOM HEADS. INTERNAL RATED 3.4 BAR/FULL VACUUM DESIGN PRESSURE AT -28 TO 177 DEG.C. UNIT MOUNTED ON 4 STAINLESS STEEL LEGS WITH WHEELS. S/NJ1930-10
|
🔒 Subscribe | ||
|
|
GLATT | GS220 |
GLATT GS220 STAINLESS STEEL CONE MILL. UNIT DRIVEN BY 4 KW MOTOR. S/N:6591
|
🔒 Subscribe | |
|
|
APPROXIMATELY 37.4 SQUARE METER STAINLESS STEEL SHELL AND TUBE HEAT EXCHANGER. HAS (326) 20MM DIAMETER X 1830MM LONG STAINLESS STEEL TUBES. MILD STEEL SHELL MEASURES APPROXIMATELY 550MM DIAMETER X 1830MM LONG. BOLTED STAINLESS STEEL HEADS. UNIT ALSO HAS EXPANSION BELLOWS
|
🔒 Subscribe | |||
|
|
HM RUSTFRI |
HM RUSTFRI STAINLESS STEEL JACKETED TANK, WORKING CAPACITY 39.68 GALLON (150 LITER), INSIDE RATED FOR 40.5 PSI (2.7 BAR) AT 32-194 DEG. F (0-90 DEG. C). JACKET RATED FOR 53.25 PSI (3.55 BAR), 32-302 DEG. F (0-150 DEG. C). MAX 106-532 RPM PROPELLER AGITATOR DRIVEN VIA AN EKATO FLUID FGL-25D GEARBOX BY A SEW EURO DRIVE 1.13 HP/0.75 KW-230/400VOLT/50CYCLE/3PH MOTOR. ON 2 LEGS. S/N:NFS-1210-3
|
🔒 Subscribe | ||
|
|
BEPEX | L 200 X 50P |
BEPEX L 200 X 50P ROLL COMPACTOR. STAINLESS STEEL CONSTRUCTION - BEPEX ROLL COMPACTOR, TYPE L 200 X 50P. MATERIAL OF CONSTRUCTION IS STAINLESS STEEL ON PRODUCT CONTACT PARTS. 2 PCS OF 7.8 (200 MM) DIA. X 1.95 (50 MM) STRAIGHT SIDE FIXED ROLLS. DRIVEN VIA A STOBER GEARBOX, TYPE C713F8990R70FU10014 INCL. SPEED REDUCER BY A 4.5 HP (3 KW) 220/240-380/420 VOLT/50 CYCLE/3PM MOTOR. SCREW FEEDING SYSTEM DRIVEN BY A 1.125 HP (0.75 KW) 220/380 VOLT-50/60CYCLE/3PH MOTOR. ALSO INCLUDES STAINLESS STEEL COMMINUTING MILL WITH TOP FEEDER
|
🔒 Subscribe | |
|
|
HM RUSTFRI |
HM RUSTFRI STAINLESS STEEL JACKETED TANK WITH AGITATION: HM RUSTFRI DESIGN JACKETED TANK, STAINLESS STEEL, WORKING CAPACITY 79.37 GALLON (300 LITER), INSIDE RATED FOR 40.5 PSI (2.7 BAR) AT 32-194 DEG. F (0-90 DEG. C). JACKET RATED FOR 53.25 PSI (3.55 BAR), 32-302 DEG. F (0-150 DEG. C). MAX 81-404 RPM PROPELLER AGITATOR DRIVEN VIA AN EKATO FLUID FGL-25D GEARBOX BY A SEW EURO DRIVE 1.13 HP/0.75 KW-230/400VOLT/50CYCLE/3PH MOTOR. ON 2 LEGS. S/NFS-1210B.
|
🔒 Subscribe | ||
|
|
HM RUSTFRI |
HM RUSTFRI STAINLESS STEEL JACKETED TANK, WITH AGITATION - HM RUSTFRI DESIGN JACKETED TANK, STAINLESS STEEL, WORKING CAPACITY 79.37 GALLON (300 LITER), WORKING JACKET PRESSURE 40.5 PSI (2.7 BAR) AT 32-194 DEG. F (0-90 DEG. C). TEST JACKET PRESSURE RATED FOR 53.25 PSI (3.55 BAR), 32-302 DEG. F (0-150 DEG. C). MAX 81-404 RPM PROPELLER AGITATOR DRIVEN VIA AN EKATO FLUID FGL-25D GEARBOX BY A SEW EURO DRIVE 1.13 HP/0.75 KW-230/400VOLT/50CYCLE/3PH MOTOR. ON 2 LEGS. S/NFS-1210A
|
🔒 Subscribe |
ZANCHETTA (IMA) CANGURO TUMBLER, MODEL 500 FS, SERIES 2000
ZANCHETTA (IMA) CANGURO TUMBLER, MODEL 500 FS, SERIES 2000 BIN BLENDER, STAINLESS STEEL. BIN ARM, BA...
NORMAG 2-1/2" GEAR PUMP
NORMAG 2-1/2" GEAR PUMP. INCLUDES DRIVE...
DYNAMIC AIR BLENDER SYSTEM. CONSISTING OF: OPERATOR CONTROL PANEL, COMPRESSED AIR TANK, AND A SILO,
2002 MACROPLAST EXTRUSION TECNOLOGY ME-2-45026A1S-080-AC200V5
2002 MACROPLAST EXTRUSION TECNOLOGY ME-2-45026A1S-080-AC200V5 EXTRUDER, 36:1 L/D, ELECTRICALLY HEATE...
FES 480E
FES 480E CHILLER. AMMONIA REFRIGERANT SCREW COMPRESSOR, 600 HP, 3/60/4000 VOLT, 3600 RPM MOTOR. 255 ...
FES 480E
FES 480E CHILLER. AMMONIA REFRIGERANT SCREW COMPRESSOR, 600 HP, 3/60/4000 VOLT, 3600 RPM MOTOR. DUAL...
FES 480E
FES 480E CHILLER. AMMONIA REFRIGERANT SCREW COMPRESSOR, 1250-625 HP, 3/60/4000 VOLT, 3600 RPM MOTOR....
2004 LEE INDUSTRIES 50 U7S
2004 LEE INDUSTRIES 50 U7S TRIPLE AGITATED KETTLE, 50 GALLON. 316L STAINLESS STEEL. APPROXIMATE 30" ...
2004 LEE INDUSTRIES 50 U7S
2004 LEE INDUSTRIES 50 U7S TRIPLE AGITATED KETTLE, 50 GALLON. 316L STAINLESS STEEL. APPROXIMATE 30" ...
1995 DESPATCH GWB*78X150X50
1995 DESPATCH GWB*78X150X50 PASS THRU CART OVEN, STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 50" WID...
RUSSEL FINEX 16300
RUSSEL FINEX 16300 SIEVE, STAINLESS STEEL CONSTRUCTION. BASE MOUNTED. S/N: A1906...
DESPATCH GWB*78X150X50
DESPATCH GWB*78X150X50 PASS THRU CART OVEN, STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 50" WIDE X 7...
PATTERSON-KELLEY TWIN SHELL DRY V-BLENDER
PATTERSON-KELLEY TWIN SHELL DRY V-BLENDER WITH PIN BAR. 75 CUBIC FOOT, STAINLESS STEEL CONSTRUCTION....
FES 480E
FES 480E CHILLER. AMMONIA REFRIGERANT SCREW COMPRESSOR, 1250-625 HP, 3/60/4000 VOLT, 3600 RPM MOTOR....
FRISTAM 742-180
FRISTAM CENTRIFUGAL PUMP, MODEL 742-180, 2.5" X 2", STAINLESS STEEL CONSTRUCTION. DIRECT COUPLED 15 ...
UNITED UTENSIL
UNITED UTENSIL TOTE BIN, 16 CUBIC FEET, 304 STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 52" DIAMETER...
GRUENBERG OVEN CO. T18HX74.35AA
GRUENBERG OVEN CO. T18HX74.35AA CART OVEN. STAINLESS STEEL, APPROXIMATE 74 CUBIC FEET CAPACITY. 2-CA...
BIOLAB
BIOLAB REVERSE OSMOSIS SYSTEM, STAINLESS STEEL CONSTRUCTION. (4) APPROXIMATELY 8" DIAMETER X 120" LO...
MILNOR 42026QHP
MILNOR 42026QHP INDUSTRIAL WASHING MACHINE. 135 POUND CAPACITY. 780 RPM, 480 VOLT. S/N: 6451301...
1998 GRAHAM GPE-85
1998 GRAHAM GPE-85 PLATE HEAT EXCHANGER, 3771 SQUARE FEET. STAINLESS STEEL PLATES RATED 150 PSI AT 2...
GRUENBERG T18HS74.35SS
GRUENBERG T18HS74.35SS OVEN. STAINLESS STEEL CONSTRUCTION. APPROXIMATELY 74 CUBIC FEET CAPACITY. SIN...
MATCON
MATCON STORAGE BIN, STAINLESS STEEL CONSTRUCTION. CONE BOTTOM WITH VALVE DISCHARGE. S/N: 1297...
FRISTAM 742-180
FRISTAM CENTRIFUGAL PUMP, MODEL 742-180, 2.5" X 2", STAINLESS STEEL CONSTRUCTION. DIRECT COUPLED 15 ...
BIOLAB
BIOLAB REVERSE OSMOSIS SYSTEM, STAINLESS STEEL CONSTRUCTION. (4) APPROXIMATELY 8" DIAMETER X 120" LO...
1998 GRAHAM GPE-85
1998 GRAHAM GPE-85 PLATE HEAT EXCHANGER, 3771 SQUARE FEET. STAINLESS STEEL PLATES RATED 150 PSI AT 2...
50 GALLON DTW GLASS LINED 3 BLADE RETREAT CURVE AGITATOR. 44" LONG X 1.5" DIAMETER X 20" SPAN. PRIMA
50 GALLON DTW GLASS LINED 3 BLADE RETREAT CURVE AGITATOR. 44" LONG X 1.5" DIAMETER X 20" SPAN.; PRIM
SADE P4 MODEL 264/9
SADE P4 MODEL 264/9 TABLET WEIGHT INSPECTION SYSTEM...
SADE P4 MODEL 264/9
SADE P4 MODEL 264/9 TABLET WEIGHT INSPECTION SYSTEM...
SADE P4 MODEL 264/9
SADE P4 MODEL 264/9 TABLET WEIGHT INSPECTION SYSTEM...
2001 GLATT GPCG 30
2001 GLATT GPCG 30 FLUID BED DRYER GRANULATOR. STAINLESS STEEL CONSTRUCTION, RATED 10 BAR SHOCK PROT...
GEMCO GLB
GEMCO GLB SLANT CONE BLENDER (.017) CUBIC FEET (.5 LITER), STAINLESS STEEL, BENCH TOP CANTILEVERED D...
SADE P4 MODEL 264/9
SADE P4 MODEL 264/9 TABLET WEIGHT INSPECTION SYSTEM...
GLATT GPCG-30
GLATT GPCG-30 18" WURSTER...
GEA COLLETTE GRAL 75
GEA COLLETTE GRAL 75 HIGH SHEAR MIXER. STAINLESS STEEL CONSTRUCTION, 75 LITER CAPACITY (MISSING BOWL...
2000 GALLON DTW GLASS LINED 3 BLADE RETREAT CURVE AGITATOR. 146" LONG X 5" DIAMETER X 44" SPAN.
COLLETTE GRAL1200
COLLETTE GRAL1200 STAINLESS STEEL MIXER/GRANULATOR. MAXIMUM CAPACITY APPROXIMATELY 1200 LITRE WITH W...
CARL CANZLER
CARL CANZLER APPROXIMATELY 4,500 LITRE CAPACITY HASTELLOY B2 VERTICAL REACTOR. UNIT MEASURES APPROXI...
BOLZ
BOLZ APPROXIMATELY 14.5 SQUARE METER 316L STAINLESS STEEL HORIZONTAL SHELL AND U-TUBE HEAT EXCHANGER...
BUCKLEY & TAYLOR
BUCKLEY & TAYLOR APPROXIMATELY 3 SQUARE METER STAINLESS STEEL HORIZONTAL SHELL AND TUBE HEAT EXCHANG...
REGLASSED 1500 GALLON DTW GLASS LINED DOUBLE STAGE TURBINE BLADES. 130" LONG X 3" DIAMETER X 28" SPA
1000 GALLON DTW GLASS LINED DOUBLE STAGE TURBINE BLADES. 117" LONG X 3.5" DIAMETER X 28" SPAN.; PRIM
WESTFALIA CA221-110
WESTFALIA CA221-110 STAINLESS STEEL DECANTER CENTRIFUGE. BOWL 220MM/125MM DIAMETER. BELT DRIVEN BY 1...
SAPPHIRE ENGINEERING
SAPPHIRE ENGINEERING APPROXIMATELY 150 LITRE CAPACITY VERTICAL 316L STAINLESS STEEL RECEIVER VESSEL....
GLATT GS220
GLATT GS220 STAINLESS STEEL CONE MILL. UNIT DRIVEN BY 4 KW MOTOR. S/N:6591...
APPROXIMATELY 37.4 SQUARE METER STAINLESS STEEL SHELL AND TUBE HEAT EXCHANGER. HAS (326) 20MM DIAMET
HM RUSTFRI
HM RUSTFRI STAINLESS STEEL JACKETED TANK, WORKING CAPACITY 39.68 GALLON (150 LITER), INSIDE RATED FO...
BEPEX L 200 X 50P
BEPEX L 200 X 50P ROLL COMPACTOR. STAINLESS STEEL CONSTRUCTION - BEPEX ROLL COMPACTOR, TYPE L 200 X ...
HM RUSTFRI
HM RUSTFRI STAINLESS STEEL JACKETED TANK WITH AGITATION: HM RUSTFRI DESIGN JACKETED TANK, STAINLESS ...
HM RUSTFRI
HM RUSTFRI STAINLESS STEEL JACKETED TANK, WITH AGITATION - HM RUSTFRI DESIGN JACKETED TANK, STAINLES...