CNC Machinery Fabrication Equipment from the Complete Closures of Rapid Prototyping Heavy Steel Plate Processing Operations

1990 MVE INC. VOS-6000-NC-250-10L-15 CRYOGENIC BULK STORAGE TANK VERTICAL OPERATING SYSTEM (VOS) TANK. DOUBLE-WALL, VACUUM-JACKETED PRESSURE VESSEL. NOMINAL CAPACITY: ~6,000 GALLONS. MAWP: 250 PSI @ 100F. MIN. DESIGN METAL TEMP: -320F @ 250 PSI. TARE WEIGHT: 26,270 LBS. S/N: 2045

2018 DOOSAN G25N-7 INDUSTRIAL FORKLIFT HOURS 860.8 FUEL TYPE: LP (LIQUID PROPANE). TRUCK WEIGHT: 9,347 LBS (4,240 KG). LIFTING CAPACITY: 4,200 LBS (1,725 KG) AT A 24-INCH (600 MM) LOAD CENTER. MAST TYPE: FET. S/N: FGA14-1290-06526

1997 FADAL VMC 5020A CNC VERTICAL MACHINING CENTER. FLOOR TO TABLE SURFACE: 35" MACHINE WIDTH X DEPTH: 116" W X 87" D MACHINE HEIGHT: 104" MACHINE WEIGHT: 11,500 LBS. TABLE SIZE: 20" X 56.75" T-SLOTS (NO. X WIDTH X SPAN): 5 X .687" X 3.75" CUTTING FEED RATE (X/Y/Z): .01 - 375 IPM RAPID FEED RATE: 700 IPM (X/Y) / 600 IPM (Z) MAXIMUM WEIGHT ON TABLE: 1,600 LBS. LONGITUDINAL (X AXIS): 50" CROSS (Y AXIS): 20" VERTICAL (Z AXIS): 28" SPINDLE NOSE TO TABLE: 4" - 32" SPINDLE CENTER TO COLUMN: 20" ACCURACY POSITIONING: .0002" (@ 68 F) REPEATABILITY: .0001" (@ 68 F) SPINDLE DRIVE SYSTEM WYE/DELTA: 22.5 HP* 16.8 KW SPEED: 150 - 7,500 RPM ORIENTATION: ELECTROMECHANICAL TAPER: NO. 40 / BT40 POWER THREE PHASE: 190-510 VAC (MULTI-TAP TRANSFORMER INCLUDED) TOOLS ATC, NUMBER OF TOOLS: 24 ATC, TOOLS SELECTION: RANDOM BI-DIRECTIONAL MAX. TOOL DIAMETER: 3" (W/O ADJACENT TOOLS 6") MAX. TOOL LENGTH: 15" MAX. TOOL WEIGHT: 15 LB. OPTIONS INSTALLED COOLANT THROUGH THE SPINDLE SWING ARM STYLE TOOL CHANGER WITH 24 CAPACITY VERTICAL TOOL HOLDER EXTENDED Z AXIS 28" SPINDLE NOSE TO TABLE 4" - 32" S/N 012002094591

2003 FADAL VMC 6030 HT CNC VERTICAL MACHINING CENTER. SIZE 62.5" X 30" FLOOR TO TABLE SURFACE 35.25" T-SLOTS (NO. X WIDTH X SPAN) 5 X .687" X 5.5" CUTTING FEED RATE (X/Y/Z) .01"-250" (375' @ 150%) RAPID FEED RATE (X/Y/Z) 400 IPM (X/Y/Z) MAX. WEIGHT ON TABLE 2,000 LBS AXIS DRIVE MOTOR (X/Y/Z) DC: 2,200 LBS CONTINUOUS THRUST / 4,000 LBS PEAK BALL SCREW SIZE 1.75" DIA. X/Y, 1.50" DIA. Z LONGITUDINAL (X AXIS) 60" CROSS (Y AXIS) 30" VERTICAL (Z AXIS) 30" SPINDLE NOSE TO TABLE 5.5"-35.5" SPINDLE CENTER TO COLUMN WAYS 30" MAIN MOTOR 22.5 HP (PEAK), 16.8 KW TORQUE (PEAK) 220 FT-LBS ACCURACY, AXIS POSITIONING +/-.0003" (@ 68 DEGREES F) ACCURACY, AXIS REPEATABILITY +/-.00015" (@ 68 DEGREES F) SPINDLE SPEED 40-10,000 RPM SPINDLE ORIENTATION ELECTROMECHANICAL SPINDLE TAPER NO. 40 ATC, NUMBER OF TOOLS 21 ATC, TOOL SELECTION RANDOM/BI-DIRECTIONAL MAX. TOOL DIAMETER 3" (W/O ADJACENT TOOLS 6.0"") MAX. TOOL LENGTH 15" MAX. TOOL WEIGHT 15 LBS MACHINE WIDTH X DEPTH 158" W X 103" D MACHINE HEIGHT 119" H MACHINE WEIGHT 17,000 LBS AIR PRESSURE 80 PSI, 15 SCFM (MOMENTARY) CNC MEMORY 38K (277 FT) STANDARD LOW RANGE 75-2,500 RPM HIGH RANGE 2501-10,000 RPM POWER:12:43 RUNNING 15404:05:20 OPTIONS INSTALLED HIGH TORQUE (HT) MAIN MOTOR 22.5 HP (PEAK), 16.8 KW HT MAIN MOTOR TORQUE 220 FT-LBS HT SPINDLE SPEED 40 - 10,000 RPM MEMORY EXPANSION 422K RIGID TAPPING 32MP PENDANT AMEREX FIRE SUPPRESSION SYSTEM S/N 012003045185

BRIDGEPORT SERIES II SPECIAL MILLING MACHINE WITH ACU-RITE DRO 200S 2X G TABLE TRAVEL (X-AXIS) MANUAL: 33 1/2 INCH (851 MM) TABLE TRAVEL (X-AXIS) POWER: 32 1/2 INCH (825 MM) SADDLE TRAVEL (Y-AXIS): 15 INCH (381 MM) KNEE TRAVEL (Z-AXIS): 12 INCH (305 MM) QUILL TRAVEL: 5 INCH (127 MM) RAM TRAVEL: 17 INCH (432 MM) THROAT DISTANCE (MIN.): 6 INCH (152 MM) THROAT DISTANCE (MAX.): 23 INCH (584 MM) TABLE TO SPINDLE NOSE GAGE LINE: 4 INCH (102 MM) (MIN.) MAX. TABLE LOADING: 1500 LBS. (681 KG) TABLE OVERALL SIZE: 11 X 58 INCH (279 X 1473 MM) T-SLOTS-THREE: 2 1/2 INCH (64 MM) CENTERS T-SLOT SIZE: 5/8 INCH (16 MM) HEIGHT ABOVE FLOOR (MAX.): 46 1/2 INCH (1181 MM) SPINDLE POWER RATING: 3 HP (1.5 KW) TAPER: R8 TAPER SPEED RANGE LOW-INFINITELY VARIABLE: 60 - 500 RPM HIGH-INFINITELY VARIABLE: 500 - 4200 RPM CONTROLLED DOWNFEED RANGE: 0.0015 INCH (0.038 MM) MANUAL ADJUST: 0.003 INCH (0.076 MM) MANUAL ADJUST: 0.006 INCH (0.152 MM/REV.) DRILLING CAPACITY MILD STEEL (MANUAL): 3/4 INCH (19 MM) MILD STEEL (POWER FEED): 3/8 INCH (10 MM) MILLING CAPACITY (MILD STEEL): 2 CU. IN./MIN. (32 CC/MIN.) BORING RANGE (MILD STEEL): TO 6 INCH (152 MM) DIAMETER SPINDLE DIAMETER: 1 7/8 INCH (48 MM) QUILL DIAMETER: 3 3/8 INCH (86 MM) MILLING FEED RATE X-AXIS: 0.75 - 35 IPM (19 - 889 MM/MIN.) OR: 0.3 - 20 IPM (8 - 508 MM/MIN.) FLOOR AREA: 7 X 10 FT. (2.1 X 3.1 M) HEIGHT: 83 INCH (2108 MM) NET WEIGHT: 3655 LBS. (1657 KG) SHIPPING WEIGHT: 4455 LBS. (2020 KG) ELECTRICAL SUPPLY: 60 HZ 3-PHASE, 208/230/460/575 VOLTS SINGLE PHASE POWER FEED: 115 VOLT, 60 HERTZ ELECTRICAL RATING: 6 KVA COLOR STANDARD: MACHINE TOOL GRAY S/N 8840S

2013 INTERNATIONAL 4400 DURASTAR 24 X 8' FLATBED TRUCK. 6X4 TANDEM AXLE. 24' WOOD FLOOR FLATBED. ENGINE: INTERNATIONAL MAXXFORCE 9 (MX 9) 9.3L DIESEL. TRANSMISSION: EATON FULLER 10-SPEED MANUAL (HIGH/LOW RANGE). BRAKE SYSTEM: AIR BRAKES WITH ABS. EMISSIONS: SCR WITH DIESEL EXHAUST FLUID (DEF). GVWR: 52,000 - 54,000 LBS (CLASS 8 HEAVY DUTY). FRONT AXLE CAPACITY: 12,000 - 14,000 LBS. REAR AXLE CAPACITY: 40,000 LBS (TANDEM). WHEELBASE: ~254 INCHES. SUSPENSION: AIR RIDE (INTERNATIONAL RIDE OPTIMIZED SUSPENSION). WHEEL TYPE: POLISHED ALUMINUM. S/N: 1HTMSAZR1EH772943

HELI CPYD25C-KU1H 5,000 LB (2.5-TON) CAPACITY INDUSTRIAL FORKLIFT S/N 230252F9896 HOURS 1436.7 LOAD CAPACITY: 5,000 LBS (2,500 KG) AT A 24-INCH LOAD CENTER. MAXIMUM TRAVEL SPEED: 10.8 MPH (17.4 KM/H). LIFT SPEED: 96 FT/MIN LOADED; 106 FT/MIN UNLOADED. LOWERING SPEED: APPROXIMATELY 88 FT/MIN LOADED; 98 FT/MIN UNLOADED. ENGINE MODEL: KUBOTA WG2503 (2.5L, 4-CYLINDER, WATER-COOLED). RATED POWER: 58.3 HP @ 2,600 RPM (LPG). RATED TORQUE: 120.7 LB-FT @ 1,800 RPM (LPG). FUEL TYPE: LPG (PROPANE). TRANSMISSION: 1-1 POWERSHIFT TRANSMISSION. OVERALL WIDTH: 42 INCHES. OVERALL LENGTH (TO FORK FACE): APPROXIMATELY 94.5 INCHES. OVERHEAD GUARD HEIGHT: 83 INCHES. TURNING RADIUS (OUTSIDE): 78.7 INCHES. WHEELBASE: 58 INCHES. SERVICE WEIGHT: APPROXIMATELY 9,480 LBS. MAST TYPE: TYPICALLY A 3-STAGE TRIPLEX MAST. MAXIMUM LIFT HEIGHT: UP9 INCHES (DEPENDING ON SPECIFIC MAST CONFIGURATION). LOWERED MAST HEIGHT: 83 TO 86 INCHES. TIRE TYPE: SOLID SMOOTH CUSHION TIRES (DESIGNED FOR INDOOR USE). TIRE SIZES: FRONT: 21X7-15; REAR: 16X6-10.5. STANDARD FEATURES HYDRAULICS: OFTEN FEATURES 4-WAY HYDRAULICS WITH A HANG-ON SIDE SHIFTER. SAFETY: OPERATOR PRESENCE SYSTEM (OPS), LED HEADLIGHTS, AND A MAGNETIC ROTATING STROBE. ERGONOMICS: FULL SUSPENSION SEAT, ADJUSTABLE STEERING COLUMN, AND CONVEX REAR-VIEW MIRROR.

INGERSOLL RAND UP6 SERIES ROTARY SCREW AIR COMPRESSOR MODEL UP6-5TAS-150 GRAIN MAXIMUM PRESSURE: 150 PSIG AIRFLOW CAPACITY: 12.9 CFM PUMP SPEED: 1900 RPM TANK CAPACITY: 80 GALLONS RATING: 5 HP VOLTAGE: 230 VOLTS FREQUENCY: 60 HERTZ PHASE: 3 FUSE REQUIREMENT: TIME DELAY FUSES MARKED RK1 OR RK5 HOURS 1400 S/N CBV932152

1996 FADAL VMC 15RT CNC VERTICAL MACHINING CENTER. FLOOR TO TABLE SURFACE: 30.5" MACHINE WIDTH X DEPTH: 75" W X 77" D XT: 90" W X 77" D MACHINE HEIGHT: 101" MACHINE WEIGHT: 5,500 LBS. POWER:19:04 RUNNING 6095:32:36 TABLE SIZE: 29.5" X 16" XT: 38" X 16" T-SLOTS (NO. X WIDTH X SPAN): 3 X .562" X 4.33" CUTTING FEED RATE (X/Y/Z): .01 - 375 IPM RAPID FEED RATE: 400 IPM (X/Y/Z) MAX. WEIGHT ON TABLE: 750 LBS. LONGITUDINAL (X AXIS) / XT: 20"/30" CROSS (Y AXIS): 16" VERTICAL (Z AXIS): 20" SPINDLE NOSE TO TABLE: 4" - 24" SPINDLE CENTER TO COLUMN: 17" ACCURACY POSITIONING: .0002" (@ 68 F) REPEATABILITY: .0001" (@ 68 F) SPINDLE SPEED: 150 - 7,500 RPM ORIENTATION: ELECTROMECHANICAL TAPER: BT40 TOOLS ATC, NUMBER OF TOOLS: 21 ATC, TOOL SELECTION: RANDOM/BI-DIRECTIONAL MAX. TOOL DIAMETER: 3" (W/O ADJACENT TOOLS 6.0") MAX. TOOL LENGTH: 15" MAX. TOOL WEIGHT: 15 LBS. MOTOR MAIN MOTOR: 15 HP* WYE/DELTA TORQUE: 120 FT.-LBS.* AXIS DRIVE MOTOR (X/Y/Z): 3,500 LBS. THRUST OPTIONS INSTALLED RIGID TAPPING S/N: 9609308

1996 GROVE AMZ46NE 40' ELECTRIC MANLIFT W/ ARTICULATING BOOM, VERY LOW HOURS SN:36884 HOURS: ~246 LOAD RATING: 500 LBS MAXIMUM OCCUPANTS: 2 MAX PLATFORM HEIGHT: 40' MAX HYDRAULIC PRESSURE: 2500 PSI BATTERY VOLTAGE: 48V OVERALL WIDTH: 5' OVERALL LENGTH: 18.7' STOWED HEIGHT: 7' WHEELBASE: 6.34' GROUND CLEARANCE: 6" WEIGHT: 13,700 LBS FEATURES: FULL 360 DEGREE ROTATION 180 DEGREE PLATFORM ROTATION

MITUTOYO CRYSTA-PLUS M7106 COORDINATE MEASURING MACHINE (CMM) WITH CMM-MANAGER SOFTWARE (RETROFIT). MEASURING RANGE: X-AXIS: 27.56" (700MM) Y-AXIS: 39.37" (1000MM) Z-AXIS: 23.62" (600MM). RESOLUTION: .00002" (0.0005MM). ACCURACY (20C) ISO10360-2: E = (4.5+4.5L/1000)M R = 4.0M (WHEN USING TP20). GUIDE METHOD: AIR BEARING FOR EACH AXIS. CLAMPING METHOD: QUICK AIR CLAMP FOR EACH AXIS. MEASURING TABLE: MATERIAL: GRANITE WORKING AREA: 34.65" X 67.72" (880MM X 1720MM) TAPPED INSERT: M8 X 1.25. WORKPIECE: MAX HEIGHT: 31.50" (800MM) MAX. WEIGHT: 1760LBS. (800KG). AIR PRESSURE: 0.4MPA (4KGF/CM2) OR 58 PSI. AIR CONSUMPTION: 50L/MIN OR 1.8CFM. DIMENSIONS: WIDTH: 57.87" (1470MM) DEPTH: 76.77" (1950MM) HEIGHT: 111.41" (2830MM). MACHINE WEIGHT: 3,968LBS. (1800KG). PROBE: RENISHAW MH20I AND PH8. SOFTWARE: CMM-MANAGER (RETROFIT). INCLUDES: AIR DRYER, SMC, MASTER BALL DIA 20MM (CERAMIC/STD), BRETFORD ADJ CART, 24WC18DX26-42H, 4" CASTERS. S/N 10251706

HYD-MECH S-20 SERIES HORIZONTAL BAND SAW CUTTING CAPACITY RECTANGULAR 13 INCH HIGH X 18 INCH WIDE 325MM X 450MM ROUND 12 INCH DIA @ 45 300MM DIA @ 45 BLADE LENGTH 13' 6" 4115MM WIDTH 1 INCH (1.075 INCH INCLUDING TEETH) 25MM (27.3MM INCLUDING TEETH) THICKNESS .032 INCH 0.8MM BLADE SPEED STANDARD STEP PULLEY 90 / 140 / 220 / 370 SFM 22 / 34 / 58 / 90 M/MIN 3 HP VARIABLE SPEED OPTION 75 TO 400 SFM 22 TO 122 M/MIN BLADE GUIDES CARBIDE INSERTS CARBIDE INSERTS BLADE WHEEL DIAMETER 16 INCH 400 MM MOTORS STANDARD 2 HP 1.5 KW VARIABLE SPEED OPTION 3 HP 2.2 KW HYDRAULIC OPTION 1/4 HP 0.2 KW HYDRAULIC OPTIONAL - MICRO POWERPACK GEAR PUMP COOLANT PUMP 2.4 US GAL/MIN 9 L/MIN COOLANT RESERVOIR 6 GALLONS 23 LITRE TABLE HEIGHT 30 INCH HIGH 762 MM MACHINE WEIGHT 1800 POUNDS 810 KG OVERALL DIMENSIONS 80 INCH W X 80.5 INCH L X 55.5 INCH H 2037MM W X 2046MM L X 1408MM H S/N 61000310

1991 CATERPILLAR VC60D SA FORKLIFT 6000 LBS CAPACITY PNEUMATIC TIRE FORKLIFT LPG FUEL TYPE 6000 LBS RATED LIFT CAPACITY APPROX. 9380-10300 LBS OPERATING WEIGHT 173-188 INCHES MAX LIFT HEIGHT THREE-STAGE MAST APPROX. 84 INCHES LOWERED MAST HEIGHT POWER SHIFT AUTOMATIC TRANSMISSION CAT 1404 / PEUGEOT XN1P-4 ENGINE 4-CYLINDER APPROX. 48.5 HP LIQUID COOLED PNEUMATIC TIRES 7.00-15 DRIVE TIRES 6.00-9 STEER TIRES 42 INCHES STANDARD FORK LENGTH OVERHEAD GUARD (OROPS) S/N: 4CC01067

INGERSOLL RAND R7.5N-A145 ROTARY SCREW AIR COMPRESSOR 10 HP MAXIMUM PRESSURE 145 PSIG AMPERAGE 33.4 AMPS VOLTAGE 230 V PHASE 3 FREQUENCY 60 HZ PUMP SPEED VARIABLE HOURS 16479 S/N:CBV886839

1999 FADAL VMC 5020AHT CNC VERTICAL MACHINING CENTER. GENERAL SPECIFICATIONS: FLOOR TO TABLE SURFACE: 35" MACHINE WIDTH X DEPTH: 116" W X 87" D MACHINE HEIGHT: 104" MACHINE WEIGHT: 11,500 LBS. POWER ON: 11902:57:31 RUNNING: 24855:56:00 TABLE SIZE: 20" X 56.75" T-SLOTS (NO. X WIDTH X SPAN): 5 X .687" X 3.75" CUTTING FEED RATE (X/Y/Z): .01 - 375 IPM RAPID FEED RATE: 700 IPM (X/Y) / 600 IPM (Z) MAXIMUM WEIGHT ON TABLE: 1,600 LBS. LONGITUDINAL (X AXIS): 50" CROSS (Y AXIS): 20" VERTICAL (Z AXIS): 28" SPINDLE NOSE TO TABLE: 4"-32" SPINDLE CENTER TO COLUMN: 20" ACCURACY POSITIONING: .0002" (@ 68 F) REPEATABILITY: .0001" (@ 68 F) SPINDLE DRIVE SYSTEM WYE/DELTA: 22.5 HP* 16.8 KW SPEED: 150 - 7,500 RPM ORIENTATION: ELECTROMECHANICAL TAPER: NO. BT40 POWER THREE PHASE: 190-510 VAC TOOLS ATC, NUMBER OF TOOLS: 21 ATC, TOOLS SELECTION: RANDOM BI-DIRECTIONAL MAX. TOOL DIAMETER: 3" (W/O ADJACENT TOOLS 6") MAX. TOOL LENGTH: 15" MAX. TOOL WEIGHT: 15 LB. OPTIONS INSTALLED: @M-FUNCTION CARD ONLY RIGID TAPPING HIGH TORQUE 28 INCH EXTENDED COLUMN 10,000 RPM SPINDLE MILLIMETER BALL SCREW AMEREX FIRE SUPPRESSION SYSTEM S/N 9907055

1996 HYD-MECH ENGINEERING LTD. S-20 SERIES II HORIZONTAL BANDSAW. 2 HP MOTOR, 240V, 3 PHASE, 60 HZ, 6.6 FLA. CUTTING CAPACITY: RECTANGULAR (AT 90) 13" H X 18" W, ROUND (AT 90) 13" DIAMETER, RECTANGULAR (AT 45) 13" H X 10.75" W, ROUND (AT 45) 12" DIAMETER. BLADE SIZE: 1" X 14' 10", BLADE SPEED: 75 - 350 SFM (VARIABLE). COOLANT CAPACITY: 6 GALLONS. MACHINE WEIGHT: ~2,200 LBS. FOOTPRINT: ~80" W X 72" D X 58" H. S/N 60696366

MILLER MILLERMATIC 350P MIG WELDING MACHINE. AMPERAGE RANGE: 25 - 400 A DC. RATED OUTPUT: 300 A AT 32 VDC, 60% DUTY CYCLE. MAX OPEN CIRCUIT VOLTAGE: 72 VDC. WIRE FEED SPEED: STANDARD MIG GUN: 50 - 700 IPM (1.3 - 17.8 M/MIN). SPOOL/PUSH-PULL GUN: 50 - 800 IPM (1.3 - 20 M/MIN). MATERIAL THICKNESS: WELDS FROM 22 GAUGE UP TO 1/2-INCH (12.7 MM) THICK. WELDABLE METALS: MILD STEEL, STAINLESS STEEL, AND ALUMINUM. WIRE DIAMETER RANGE: SOLID STEEL: .023" - .045" (0.6 - 1.2 MM). ALUMINUM: .035" - .047" (0.9 - 1.2 MM). FLUX-CORED: .030" - .052" (0.8 - 1.3 MM). MAX SPOOL DIAMETER: 12 INCHES (305 MM). DIMENSIONS: 34" H X 19" W X 41" D (863 X 483 X 1041 MM). NET WEIGHT: 181 LBS (82 KG). FEATURES PULSED MIG, AUTO-GUN DETECT, FAN-ON-DEMAND. S/N: MJ383032N

2022 SFX 50W SPLIT FIBER LASER MARKING MACHINE, MODEL SFX-50GS. LASER POWER 50W. LASER SOURCE JPT LP+ (OR LP-E) FIBER. MARKING AREA 175 X 175 MM (STANDARD). MARKING SPEED 7,000 MM/S (275.6 IN/S). ENGRAVING DEPTH 1.0 MM (0.039 IN). MIN. LINE WIDTH 0.01 MM (0.0004 IN). MIN. CHARACTER 0.2 MM (0.008 IN). RE-POSITION PRECISION 0.002 MM. FREQUENCY RANGE 1600 KHZ. PULSE DURATION 200 NS. SOFTWARE EZCAD 2.0 (LIGHTBURN COMPATIBLE). CONTROL BOARD BJ JCZ BOARD (ORIGINAL). OS COMPATIBILITY WINDOWS XP / VISTA / 7 / 8 / 10. ELECTRICAL REQUIREMENTS 110V/220V 50HZ/60HZ. POWER CONSUMPTION 1000W. COOLING METHOD AIR COOLING. MAX. MATERIAL THICKNESS 206 MM (8.1 IN).

WINKLE INDUSTRIES INDUSTRIAL LIFTING ELECTROMAGNET SPECIFICATIONS MODEL: DAWX SIZE: 55 WEIGHT: 4,345 LBS VOLTAGE: 230V COLD CURRENT: 69.90 AMPS HOT CURRENT: 48.93 AMPS RESISTANCE: 3.29 @ 68F IMPEDANCE: 2.36 DUTY CYCLE: 50% DESIGN CATEGORY: B SERVICE CLASS: 3

GRIZZLY G4029 MILLING MACHINE WITH SARGON DRO. POWER & MOTOR MOTOR: 3 HP, 3-PHASE, 60 HZ REQUIRED POWER SOURCE: 220V FULL-LOAD CURRENT RATING: 8.4A MINIMUM CIRCUIT SIZE: 20A CONNECTION TYPE: CORD & PLUG (5 FT. LENGTH) SPINDLE & OPERATION SPINDLE TAPER: R-8 HEAD TYPE: VARIABLE SPEED (VS) TURRET HEAD TABLE SIZE: 10" X 50" PHYSICAL DIMENSIONS OVERALL SIZE: 72" W X 68" D X 88" H FOOTPRINT: 40" L X 24" W MACHINE WEIGHT: 2,500 LBS S/N 822579

NARDINI MASCOTE MS 1640 ENGINE LATHE WITH BISON 8 INCH THREE JAW CHUCK. TYPE: GAP BED MANUAL TOOLROOM LATHE CAPACITY SWING OVER BED: 16.125 INCH (410 MM) SWING OVER CROSS SLIDE: 10.25 INCH (260 MM) SWING IN GAP: 22.00 INCH (560 MM) DISTANCE BETWEEN CENTERS: 40 INCH (1000 MM) WIDTH OF BED: 10.25 INCH (260 MM) HEADSTOCK & SPINDLE SPINDLE SPEEDS: 18 SPEEDS SPEED RANGE: 31.5 TO 2,500 RPM SPINDLE BORE: 1.885 INCH (48 MM) SPINDLE NOSE: D1-5 CAMLOCK SPINDLE TAPER: MT #5 (INTERNAL) THREADING & FEEDS INCH THREADING: 48 RANGES (3-1/2 TO 42 TPI) METRIC THREADING: 48 RANGES (0.40 TO 7.00 MM PITCH) LONGITUDINAL FEEDS: 96 RANGES (0.002 INCH TO 0.034 INCH IPR) CROSS FEEDS: 96 RANGES (0.001 INCH TO 0.017 INCH IPR) TAILSTOCK TAILSTOCK QUILL TAPER: MT #3 QUILL TRAVEL: 5.125 INCH (130 MM) QUILL DIAMETER: 2.00 INCH (50 MM) MECHANICAL & ELECTRICAL MAIN MOTOR: 6.3 HP / 4.2 HP (DUAL SPEED) ELECTRICAL REQUIREMENTS: 220V, 3-PHASE, 60HZ MACHINE WEIGHT: APPROX. 3,450 LBS (1,565 KG) FLOOR SPACE (L X W X H): 86 INCH X 36 INCH X 51 INCH S/N D2JCV722

HYPERTHERM POWERMAX65 SYNC PLASMA CUTTING SYSTEM SPECIFICATIONS CUTTING & GOUGING CAPACITY CAPACITY MATERIAL THICKNESS CUT SPEED RECOMMENDED 20 MM (3/4") 500 MM/MIN (20 IPM) MAXIMUM 25 MM (1") 250 MM/MIN (10 IPM) SEVERANCE 32 MM (1-1/4") 125 MM/MIN (5 IPM) PIERCE 16 MM (5/8") MAXIMUM GOUGE METAL REMOVAL RATE: 4.8 KG (10.7 LBS.) PER HOUR ELECTRICAL SPECIFICATIONS INPUT VOLTAGE: AUTO-VOLTAGETM DETECTION FOR 200480 V (1-PH) AND 200600 V (3-PH). INPUT CURRENT (@ 9 KW OUTPUT): 1-PH: 52/50/44/22 A (200/208/240/480 V) 3-PH: 32/31/27/13/13 A (200/208/240/480/600 V) DUTY CYCLE (@ 40C / 104F): 50% @ 65 A, 230600 V (1/3-PH) 100% @ 46 A, 230600 V (1/3-PH) ENGINE DRIVE REQUIREMENT: 15 KW FOR FULL 65 A OUTPUT. GAS & AIR REQUIREMENTS GAS TYPE: CLEAN, DRY, OIL-FREE AIR OR NITROGEN. RECOMMENDED INLET FLOW RATE/PRESSURE: CUTTING: 210 L/MIN (450 SCFH, 7.5 SCFM) @ 5.9 BAR (85 PSI). GOUGING: 210 L/MIN (450 SCFH, 7.5 SCFM) @ 4.8 BAR (70 PSI). INLET PRESSURE RANGE: 5.28.3 BAR (75120 PSI). PHYSICAL DIMENSIONS SIZE (WITH HANDLES): 483 MM (19") D; 233 MM (9.2") W; 430 MM (17") H. WEIGHT (WITH 25' TORCH): 29 KG (61 LBS.)

SHELDON R-15 METAL ENGINE LATHE WITH 3 JAW 8 INCH BUCK CHUCK AND TRANSFORMER. SWING OVER BED: 15". DISTANCE BETWEEN CENTERS: TYPICALLY 40" OR 42", WITH SOME VARIATIONS UP TO 70". SPINDLE BORE: 2 1/4" (2.25"). SPINDLE NOSE: D1-6" CAMLOCK. SPINDLE SPEEDS: STANDARD RANGE OF 45 TO 1250 RPM (8 SPEEDS), THOUGH OPTIONAL FASTER SETS UP TO 1800 RPM (16 SPEEDS) WERE AVAILABLE. MOTOR: STANDARD 5 HP, 3-PHASE (220/440V), WITH OPTIONAL 2-SPEED MOTORS AVAILABLE. TAILSTOCK TAPER: #4 MORSE TAPER (MT#4). WEIGHT: APPROXIMATELY 2,900 LBS. INCLUDES 9 KVA CHALLENGER DRY TYPE TRANSFORMER S/N 29-2/90-237293. TRANSFORMER SPECIFICATIONS CATALOG NUMBER: 901-424 CAPACITY: 9 KVA MODEL: 4 VOLTAGE: 480 - 240 PHASE: THREE PHASE FREQUENCY: 60 HERTZ INSULATION SYSTEM: 220C (2220-1) TEMPERATURE RISE: 150C IMPEDANCE: 5.75% AT 170C WEIGHT: 152 LBS. S/N 1314

WINKLE INDUSTRIES INDUSTRIAL LIFTING ELECTROMAGNET SPECIFICATIONS WEIGHT 5900 VOLTAGE 250 DUTY CYCLE 50% RESISTANCES 7.1 IMPEDANCE 50 COLD CURRENT 29 Q+ (OHMS/AMPS)

SFX 50W SPLIT FIBER LASER MARKING MACHINE, MODEL SFX-50GS WITH 80MM 3 JAWS ROTARY CHUCK. LASER POWER 50W, LASER SOURCE JPT LP+ (OR LP-E) FIBER, MARKING AREA 175 X 175 MM (STANDARD), MARKING SPEED 7,000 MM/S (275.6 IN/S), ENGRAVING DEPTH 1.0 MM (0.039 IN), MIN. LINE WIDTH 0.01 MM (0.0004 IN), MIN. CHARACTER 0.2 MM (0.008 IN), RE-POSITION PRECISION 0.002 MM, FREQUENCY RANGE 1600 KHZ, PULSE DURATION 200 NS, SOFTWARE EZCAD 2.0 (LIGHTBURN COMPATIBLE), CONTROL BOARD BJ JCZ BOARD (ORIGINAL), OS COMPATIBILITY WINDOWS XP / VISTA / 7 / 8 / 10, ELECTRICAL REQUIREMENTS 110V/220V 50HZ/60HZ, POWER CONSUMPTION 1000W, COOLING METHOD AIR COOLING, MAX. MATERIAL THICKNESS 206 MM (8.1 IN).

TRINCO DRY BLAST CABINET, MODEL 40X40SL/PC WITH DP850 DUST COLLECTOR. DIMENSIONS INSIDE WORK AREA: 40" W X 40" D X 31" H. OVERALL DIMENSIONS: 45" W X 71" D X 71" H. SIDE DOOR OPENING: 20" W X 30" H. SPLIT LEVEL OPENING: 40" W X 40" D. WINDOW SIZE: 12" X 24" SAFETY GLASS. SYSTEM TYPE: DIRECT PRESSURE (PC/PRESSURE CABINET). OPERATING PRESSURE: TYPICALLY 40-60 PSI. AIR CONSUMPTION: APPROXIMATELY 25 CFM @ 80 PSI. CONSTRUCTION: 14 GAUGE WELDED STEEL CABINET. STANDARD FEATURES: TUNGSTEN CARBIDE NOZZLE, FOOT PEDAL CONTROL, AND FLUORESCENT LIGHTING. ABRASIVE CAPACITY: 100 LBS STANDARD. S/N: 5277-0

2012 LINCOLN ELECTRIC RANGER 225 WELDER/GENERATOR. RATED OUTPUT: 225A DC / 25V @ 40% DUTY CYCLE; 210A DC / 25V @ 100% DUTY CYCLE. OUTPUT RANGE: 50-225A DC FOR STICK/TIG; 15-25V FOR WIRE (CV). PROCESSES: STICK (SMAW), TIG (GTAW), MIG (GMAW), AND FLUX-CORED (FCAW). GENERATOR OUTPUT PEAK POWER: 10,500 WATTS SINGLE-PHASE AC. CONTINUOUS POWER: 9,000 WATTS. VOLTAGE/FREQUENCY: 120V / 240V @ 60 HZ. RECEPTACLES: (2) 120V DUPLEX (NEMA 5-20R) AND (1) 120/240V FULL-KVA (NEMA 14-50R). ENGINE MODEL: KOHLER OHV COMMAND CH730. TYPE: 2-CYLINDER, 4-CYCLE, AIR-COOLED GASOLINE ENGINE. HORSEPOWER: 23 HP @ 3,600 RPM. FUEL CAPACITY: 12 GALLONS (45.4 LITERS). FUEL CONSUMPTION: APPROXIMATELY 1.5 GALLONS PER HOUR AT RATED OUTPUT. SIZE (H X W X D): 30.0" X 21.5" X 42.3" (762 X 546 X 1073 MM). NET WEIGHT: 514 LBS (233 KG). S/N U1120708603

2011 ESAB SABRE DXG 4000 GANTRY-STYLE HEAVY-DUTY CNC INDUSTRIAL PLASMA & OXY/FUEL CUTTING MACHINE TRACK WIDTH 157.5 INCHES RECOMMENDED PLATE WIDTH 10 FT. MACHINE WIDTH 199 INCHES RAIL LENGTH UP TO 104 FT. (98' 6" TRAVEL) CUTTING PROCESSES: PLASMA, OXY-FUEL PLASMA TECHNOLOGY CUTTING THICKNESS: MAX. 2.5 INCH (DEPENDING ON PLASMA UNIT POWER) NUMBER OF TORCHES: MAX. 2 PLASMA TORCHES OXY-FUEL TECHNOLOGY CUTTING THICKNESS: MAX. 8 INCH EDGE STARTING HOLE PIERCING: MAX. 6 INCH (WITH ONE OXY-FUEL TORCH) NUMBER OF TORCHES: 1 8 OXY-FUEL TORCHES FUEL GASES: ACETYLENE, PROPANE, NATURAL GAS, MIXED FUEL GASES MACHINE SPECIFICATIONS MAX. TRAVERSE SPEED: 1,400 INCH/MIN MACHINE LENGTH: 67 INCHES MACHINE HEIGHT: 90 INCHES (TO TOP OF PLASMA STATION) WORKPIECE TABLE HEIGHT: 26 30 INCHES SUPPLY VOLTAGE: 230/460/575 VAC 50/60HZ FULL LOAD AMPERAGE: 30 AMPS S/N 0560947673

YALE 5,000 LB CAPACITY LIQUID PROPANE FORKLIFT. SPECIFICATIONS CORE PERFORMANCE & CAPACITY LOAD CAPACITY: 5,000 LBS (2,268 KG) LOAD CENTER: 24 INCHES (500 MM) FUEL TYPE: LIQUID PROPANE GAS (LPG) MAXIMUM TRAVEL SPEED: 1112.7 MPH MAST & LIFTING DIMENSIONS MAST TYPE: 3-STAGE (TRIPLE) MAXIMUM LIFT HEIGHT: 187"194" (APPROX. 15.516.1 FT) LOWERED MAST HEIGHT: 84"86" TILT RANGE: 5 FORWARD / 10 BACKWARD PHYSICAL DIMENSIONS & WEIGHT OPERATING WEIGHT: 8,5009,700 LBS OVERALL WIDTH: 42"45" LENGTH (TO FORK FACE): 8.59 FT TURNING RADIUS: 6.57.8 FT CHASSIS & TIRES TIRE TYPE: CUSHION (SOLID RUBBER) INTENDED SURFACE: INDOOR / SMOOTH CONCRETE HOURS 4196 S/N N493224

AMERICAN 48" SWING TABLE WHEELABRATOR SHOT BLAST MACHINE MANUFACTURER AMERICAN WHEELABRATOR & EQUIPMENT CORP. TABLE DIAMETER 48" MAXIMUM WORK HEIGHT 19" - 28" MAXIMUM LOAD CAPACITY 1,500 LBS BLAST WHEEL HORSEPOWER 15 HP BLAST WHEEL TYPE DIRECT DRIVE CENTRIFUGAL BLAST WHEEL ABRASIVE CHARGE (INITIAL) AROUND 800 LBS VENTILATION REQUIREMENT APPROXIMATELY 1,000 CFM ELECTRICAL REQUIREMENTS 460V, 3 PHASE, 60 HZ APPROXIMATE WEIGHT AROUND 5,000 LBS (CABINET ONLY)

1999 FADAL VMC 4020HT CNC VERTICAL MACHINING CENTER S/N 9906919 TABLE SIZE 47.94" X 20" FLOOR TO TABLE SURFACE 31" T-SLOTS (NO. X WIDTH X SPAN) 5 X .687" X 3.75" CUTTING FEED RATE (X/Y/Z) .01"- 250"(375" @ 150%) RAPID FEED RATE (X/Y/Z) 700 IPM (X/Y), 600 IPM (Z) MAX. WEIGHT ON TABLE 1,500 LBS AXIS DRIVE MOTOR (X/Y/Z) DC; 1,900 LBS CONTINUOUS THRUST / 3,500 LBS PEAK BALL SCREW SIZE 40MM DIA. X/Y/Z LONGITUDINAL (X AXIS) 40" CROSS (Y AXIS) 20" VERTICAL (Z AXIS) 28" SPINDLE NOSE TO TABLE 4" - 32" SPINDLE CENTER TO COLUMN WAYS 20" MAIN MOTOR 30 HP TORQUE (PEAK) 220 FT-LBS ACCURACY, AXIS POSITIONING +/- .0002" (@ 68 DEGREES F) ACCURACY, AXIS REPEATABILITY +/- .0001"(@ 68 DEGREES F) SPINDLE SPEED 75 - 10,000 RPM SPINDLE ORIENTATION ELECTROMECHANICAL SPINDLE TAPER NO. 40 ATC, NUMBER OF TOOLS 21 ATC, TOOL SELECTION RANDOM/BI-DIRECTIONAL MAX. TOOL DIAMETER 3"(W/O ADJACENT TOOLS 6.0") MAX. TOOL LENGTH 15" MAX. TOOL WEIGHT 15 LBS MACHINE WIDTH X DEPTH 116" W X 87" D MACHINE HEIGHT 95" H MACHINE WEIGHT 10,500 LBS AIR PRESSURE 80 PSI, 15 SCFM (MOMENTARY) CNC MEMORY 384K LOW RANGE 75 - 2,500 RPM HIGH RANGE 2,501 - 10,000 RPM POWER ON -837:25:18 RUNNING 4404:58:59 OPTIONS INSTALLED EXTENDED Z AXIS 28" SPINDLE NOSE TO TABLE 4"- 32" VERY HIGH TORQUE (HT) MAIN MOTOR 30 HP HT MAIN MOTOR TORQUE 220 FT-LBS RIGID TAPPING CHIP AUGER HYDROSWEEP CHIP WASH AUTO HIGH/LOW MILLIMETER BALL SCREW

1996 MG INDUSTRIES GEMINI GANTRY-STYLE HEAVY-DUTY CNC INDUSTRIAL PLASMA & OXY/FUEL CUTTING MACHINE. MAXIMUM CUTTING WIDTH: 60 INCH. MAXIMUM CUTTING LENGTH: 125 INCH. INPUT VOLTAGE: 115 VOLTS, SINGLE PHASE, 60 HZ, 20 AMPS. CUTTING PROCESSES: PLASMA AND/OR OXY-FUEL CUTTING. FEED RATE: UP TO 1,000 INCHES PER MINUTE (IPM). POSITIONING ACCURACY: TYPICALLY 0.004 INCHES (0.1 MM). S/N GMN12P-NC-96-3111

SKF TKSA 40 SHAFT ALIGNMENT TOOL AND ALIGN-A-SHAFT TOOL

1990 LINCOLN 3KVHD HIGH-CAPACITY VERTICAL KNEE MILLING MACHINE WITH SONY MILLMAN DRO. TABLE SIZE: 10" X 50". LONGITUDINAL TRAVEL (X-AXIS): 30". CROSS TRAVEL (Y-AXIS): 16". VERTICAL KNEE TRAVEL (Z-AXIS): 14". QUILL TRAVEL: 5". SPINDLE MOTOR POWER: 3 HP. SPINDLE TAPER: R8. SPEED RANGE: 60 - 4,200 RPM. SPEED CONTROL: MECHANICAL VARIABLE SPEED (HIGH/LOW GEAR). POWER REQUIREMENT: 230/460V, 3-PHASE. MACHINE WEIGHT: APPROX. 3,200 LBS. WAY CONSTRUCTION: PRECISION GROUND BOX WAYS (KNEE AND COLUMN). S/N 901141

LINCOLN VERTICAL MILLING MACHINE, MODEL 3KVHC WITH ANILAM ELECTRONICS A163-20000 DIGITAL READOUT S/N 870752 SPINDLE MOTOR 3 HP TABLE SIZE 10" X 50" SPINDLE TAPER R-8 SPINDLE SPEEDS VARIABLE, 60 - 4,200/4,250 RPM X-AXIS TRAVEL ~32" - 36" Y-AXIS TRAVEL ~15" - 16" Z-AXIS TRAVEL ~14" - 16" QUILL TRAVEL 5" POWER FEED RATES 0.0015", 0.003", 0.006" PER REVOLUTION MACHINE WEIGHT APPROX. 3,000 LBS

2011 48' X 102" STEEL FRAME TRANSCRAFT TL-2000 FLATBED TRAILER. MANUFACTURER: TRANSCRAFT CORPORATION. DATE OF MFR: 05/2011. MODEL NO: TL-2000 48'X102". GVWR: 36,288 KG (80,000 LB). GAWR (ALL AXLES): 9,072 KG (20,000 LB). TIRES: 275/80R24.5(H). RIMS: 8.25X24.5. COLD TIRE PRESSURE: 760 KPA (110 PSI). LENGTH: 48 FT. WIDTH: 102 IN. VIN: 1TTF48254C3594081

SAWSTOP 10" INDUSTRIAL CABINET SAW MODEL ICS31230 OVERALL SAW DIMENSIONS: 44" W X 34" D X 34" H 69 1/4" W X 36 1/2" D X 34" H (W/ OPTIONAL FENCE & 36" RAILS) 85 1/4" W X 36 1/2" D X 34" H (W/ OPTIONAL FENCE & 52" RAILS) CABINET FOOTPRINT: 20" W X 25" D CAST IRON TABLE: 24" W X 30" D, 44" W X 30" D (W/ EXTENSION WINGS) EXTENSION WING: 10" W X 30" D EXTENSION TABLE (OPTIONAL): 24" W X 30" D (36" RAILS), 40" W X 30" D (52" RAILS) WEIGHTS (MAY VARY WITH MOTOR): 530 LBS (TABLE SAW ONLY) 635 LBS (W/ OPTIONAL FENCE, 36" RAILS & TABLE) 685 LBS (W/ OPTIONAL FENCE, 52" RAILS & TABLE) SHIPPING WEIGHT (APPROX.): 675 LBS (TABLE SAW ONLY) BLADE: 60-TOOTH, PROFESSIONAL GRADE, 5/8" ARBOR BLADE DIAMETER: 10" BLADE TILT: LEFT BLADE KERF: 3 MM BLADE PLATE THICKNESS: 2 MM MAX. DEPTH OF CUT, BLADE AT 0: 3 1/8" MAX. DEPTH OF CUT, BLADE AT 45: 2 1/4" MAX. RIP, RIGHT OF BLADE: 52 1/2" (W/ OPTIONAL 52" RAILS) 36 1/2" (W/ OPTIONAL 36" RAILS) MAX. RIP, LEFT OF BLADE: 12 1/2" DADO DIAMETER: 8" (REQUIRES A SEPARATE BRAKE CARTRIDGE) DADO MAX. WIDTH: 13/16" ARBOR DIAMETER AT BLADE: 5/8" MAIN BEARING SIZE: 62 MM OD X 30 MM ID SECOND BEARING SIZE: 52 MM OD X 25 MM ID TABLE IN FRONT OF BLADE (MAX. ELEVATION): 11" TABLE BEHIND BLADE (MAX. ELEVATION): 9 3/4" ARBOR RUNOUT: 0.001" MAXIMUM ALLOWABLE RUNOUT BLADE LATERAL MOVEMENT OVER FULL ELEVATION RANGE: 0.006" MAXIMUM TABLE FLATNESS MEASURED DIAGONALLY: 0.010" MAXIMUM GAP OVERALL TABLE AND EXTENSION WING FLATNESS: 0.025" MAXIMUM GAP BLADE ALIGNMENT WITH MITER SLOT: 0.010" MAXIMUM DISPLACEMENT DEVIATION OF MITER GAUGE INDEXING STOPS FROM ACTUAL ANGLE: 0.25 ALIGNMENT BETWEEN SPREADER AND BLADE: 0.010" MAXIMUM DIFFERENCE MITER SLOTS: T-SHAPED, 3/4" AT TOP, 1" AT BOTTOM, 3/8" DEEP DUST COLLECTION PORT DIAMETER: 4" RIVING KNIFE / SPREADER THICKNESS: 2 MM BLADE GUARD: POLYCARBONATE, EXTENDS ONLY 5/8" TO RIGHT OF BLADE STANDARD INSERT: ZERO CLEARANCE, PHENOLIC CORE, MELAMINE SURFACES DADO INSERT: ZERO-CLEARANCE, PHENOLIC CORE, MELAMINE SURFACES BELTS: 2 V-RIBBED BELTSARBOR BELT IS STATIC DISSIPATIVE HAND WHEELS: 8" DIAMETER, CAST IRON WITH CHROME HANDLE S/N I081001270

STANDARD THREAD GAUGES

METRIC THREAD GAUGES

WINKLE INDUSTRIES INDUSTRIAL LIFTING ELECTROMAGNET SIZE: 20 WEIGHT: 300 DESIGN CATEGORY: B SERVICE CLASS: 3 VOLTAGE: 230 COLD CURRENT: 4.53 HOT CURRENT: 3.2 RESISTANCE: 50.74 @ 68 IMPEDANCE: 11 DUTY CYCLE: 50%

BORING HEADS AND BORING BARS

(3) WELDING TABLES. TABLE 1: LENGTH 95 INCHES, WIDTH 36 INCHES, HEIGHT 294 INCHES. TABLE 2: LENGTH 17 FEET, WIDTH 3 FEET, HEIGHT 55 INCHES. TABLE 3: LENGTH 95 INCHES, WIDTH 36 INCHES, HEIGHT 29 1/2 INCHES.

ROCKFORD HYDRAULIC OPENSIDE SHAPER-PLANER SPECIFICATIONS MAX. STROKE LENGTH 36 INCHES TABLE SIZE APPROX. 21" WIDE X 36" LONG HEIGHT UNDER RAIL APPROX. 24 INCHES TABLE SPEED (CUT) INFINITELY VARIABLE UP TO APPROX. 110 FPM RETURN SPEED UP TO 150 FPM MAX. CUTTING FORCE UP TO 8,000 LBS APPROX. WEIGHT 15,000+ LBS

DAKE CORPORATION 50 TON MODEL 50H HAND-OPERATED HYDRAULIC PRESS CAPACITY: 50 TONS RAM TRAVEL: 4" SCREW TRAVEL: 7" MAX RAM TO TABLE: 40" MIN RAM TO TABLE: 5" WIDTH BETWEEN UPRIGHTS: 32-3/4" WIDTH BETWEEN TABLE CHANNELS: 7-1/4" HORIZONTAL WORKHEAD TRAVEL: 20-3/4" BASE DIMENSIONS: 43-1/2" X 36" HEIGHT: 85" WEIGHT: 810 LBS S/N: 202426

ASSORTED TOOLING

1995 FADAL VMC 6030 HT CNC VERTICAL MACHINING CENTER. SIZE 62.5" X 30" FLOOR TO TABLE SURFACE 35.25" T-SLOTS (NO. X WIDTH X SPAN) 5 X .687" X 5.5" CUTTING FEED RATE (X/Y/Z) .01"-250" (375' @ 150%) RAPID FEED RATE (X/Y/Z) 400 IPM (X/Y/Z) MAX. WEIGHT ON TABLE 2,000 LBS AXIS DRIVE MOTOR (X/Y/Z) DC: 2,200 LBS CONTINUOUS THRUST / 4,000 LBS PEAK BALL SCREW SIZE 1.75" DIA. X/Y, 1.50" DIA. Z LONGITUDINAL (X AXIS) 60" CROSS (Y AXIS) 30" VERTICAL (Z AXIS) 30" SPINDLE NOSE TO TABLE 5.5"-35.5" SPINDLE CENTER TO COLUMN WAYS 30" MAIN MOTOR 22.5 HP (PEAK), 16.8 KW TORQUE (PEAK) 220 FT-LBS ACCURACY, AXIS POSITIONING +/-.0003" (@ 68 DEGREES F) ACCURACY, AXIS REPEATABILITY +/-.00015" (@ 68 DEGREES F) SPINDLE SPEED 40-10,000 RPM SPINDLE ORIENTATION ELECTROMECHANICAL SPINDLE TAPER NO. 40 ATC, NUMBER OF TOOLS 21 ATC, TOOL SELECTION RANDOM/BI-DIRECTIONAL MAX. TOOL DIAMETER 3" (W/O ADJACENT TOOLS 6.0") MAX. TOOL LENGTH 15" MAX. TOOL WEIGHT 15 LBS MACHINE WIDTH X DEPTH 158" W X 103" D MACHINE HEIGHT 119" H MACHINE WEIGHT 17,000 LBS AIR PRESSURE 80 PSI, 15 SCFM (MOMENTARY) CNC MEMORY 38K (277 FT) STANDARD LOW RANGE 75-2,500 RPM HIGH RANGE 2501-10,000 RPM POWER:06:30 RUNNING 10383:16:39 OPTIONS INSTALLED 5TH AXIS PRE-WIRE HIGH TORQUE (HT) MAIN MOTOR 22.5 HP (PEAK), 16.8 KW HT MAIN MOTOR TORQUE 220 FT-LBS HT SPINDLE SPEED 40 - 10,000 RPM EXTRA WORK LIGHT SEALED SYSTEM RIGID TAPPING HIGH-SPEED CPU HEIDENHAIN GLASS SCALES FOR VMC 6030 HEIDENHAIN Z AXIS SCALE FOR 28" & 30" Z GRAPHITE RESTRAINT PACKAGE REMOTE MANUAL PULSE GENERATOR, FULL ASSY S/N 9503354

1985 KBC MACHINERY WP-20, A 20-INCH INDUSTRIAL WOODWORKING PLANER. SPECIFICATIONS: MANUFACTURER: KBC TOOLS & MACHINERY, MODEL NUMBER: WP-20, MANUFACTURING DATE: AUGUST 1985, COUNTRY OF ORIGIN: TAIWAN R.O.C. MACHINE TYPE: INDUSTRIAL 20" THICKNESS PLANER. CAPACITY & PERFORMANCE: MAXIMUM PLANING WIDTH: 20 INCHES, MAXIMUM PLANING THICKNESS: 8 INCHES, MINIMUM PLANING THICKNESS: 3/16 INCH, CUTTER HEAD TYPE: 4-KNIFE STRAIGHT CUTTER HEAD, DIAMETER: 3-1/8 INCHES, CUTTERHEAD SPEED: 5,000 RPM. FEED RATES: DUAL SPEED (16 FPM & 20 FPM). MOTOR & ELECTRICAL: PHASE: SINGLE PHASE (1PH), VOLTAGE: 230V, AMPERAGE: 18A - 26A (APPROXIMATE), CYCLE: 60 HZ. PHYSICAL DIMENSIONS: TABLE SIZE: 25-3/4" X 20" (MAIN CAST IRON TABLE), OVERALL WEIGHT: 800 - 900 LBS (APPROXIMATE). ADJUSTMENT: MANUAL HANDWHEEL (1.5MM / .059" PER REVOLUTION). DUST PORT: 5-INCH DIAMETER (STANDARD). S/N 850596

RIDGID 535 HEAVY DUTY PIPE THREADING MACHINE PIPE CAPACITY: 1/8" - 2" BOLT CAPACITY: 1/4" - 2" 115V AC 25-60 HZ 8 AMPS 1 PH S/N: 391765

20-INCH VERTICAL BAND SAW MODEL 81. THROAT CAPACITY: 20 INCHES. TABLE SIZE: 24" X 24". TABLE TILT: 45 TO THE RIGHT AND 15 TO THE LEFT. MAX HEIGHT UNDER GUIDE: 12 INCHES. BLADE LENGTH: MIN 12'5" (149") TO MAX 12'7" (151"). BLADE WIDTH CAPACITY: 3/8" TO 3/4". S/N: 98129

MATERIAL RACK WITH CONTENTS