All Industry Consignment Auction Various Industries and Locations
Category: ELECTRICAL AND POWER GENERATION EQUIPMENT
Total Lots:
816
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
WAUKESHA CHERRY BURRELL | 97-20457 |
WAUKESHA CHERRY BURRELL 97-20457 CENTRIFUGAL PUMP, 2" IN X 1 1/2" OUT, 2 HP, 3450 RPM MOTOR, 230/460 VOLT, S/S CONTACT
|
🔒 Subscribe | |
|
|
TRI CLOVER | C216MD211-S |
TRI CLOVER C216MD211-S CENTRIFUGAL PUMP, 2 1/2" IN X 1 1/2" OUT, TRI CLAMP FITTINGS, S/S, 7.5 HP, 3510 RPM MOTOR, 230/460 VOLT S/N: U2474
|
🔒 Subscribe | |
|
|
SINE | SPS-35SR-011 |
SINE SPS-35SR-011 POSITIVE DISPLACEMENT PUMP, 3" IN AND OUT, BEVEL SEAT SANITARY, 3 HP, 230/460 VOLT, HEAR HEAD MOTOR DRIVE, S/S PRODUCT CONTACT
|
🔒 Subscribe | |
|
|
FELDMEIER |
FELDMEIER TUBE IN TUBE HEAT EXCHANGER, ALL S/S, TRIPLE TUBE, 2 1/2" OUTER TUBE, 2" CENTER TUBE, 6 RUNS 20' LONG, MISSING 1 TURN & SOME INFEED & DISCHARGE PIECES HAVE BEEN CUT
|
🔒 Subscribe | ||
|
|
GORING KERR | TEK 21 |
GORING KERR TEK 21 METAL DETECTOR, 4" X 10" APERTURE, SET UP W/ 2 3/4" X 6 3/4" CLEARANCE THROUGH APERTURE, CONVEYOR 8' LONG, S/S FRAME, 1/2 HP, 3 PHASE, 230/460 GEAR HEAD MOTOR DRIVE, 110 VOLT
|
🔒 Subscribe | |
|
|
GRAVITY FILLER OVERFLOW, ALL S/S SET ON 603 X 700 CAN, HAS TIMING SCREW DISCHARGE W/TOPPER TO ESTABLISH HEAD SPACE, BRINING SECTION 5' LONG, UNIT 11' LONG OVERALL, 9' LONG X 18" DEEP X 18" WIDE, BRINE TANK W/HEATING COILS
|
🔒 Subscribe | |||
|
|
ROYSON ENGINEERING CO. | CTT-35 |
ROYSON ENGINEERING CO. CTT-35 VIBRATORY FINISHER. 35 CUBIC FOOT CAPACITY. 2 X 15 HP DIRECT DRIVE MOTORS; VARIABLE SPEED; URETHANE LINER. 30'' W X 332'' D X 84'' L WORK CHAMBER; MEDIA UNLOAD DOOR; SPRAY FITTING FOR COMPOUND; WEIGHT 7500 POUNDS. GOOD CONDITION. SPARE VIBRATOR.
|
🔒 Subscribe | |
|
|
INTEGRATED SOLUTIONS, DIV OF J. A. KING COMPANY |
ONE GALLON BOTTLE OR PAIL WEIGH FILLER. DESIGNED TO FILL ONE GALLON PAILS OR BOTTLES AT A TIME.
|
🔒 Subscribe | ||
|
|
27'' ENTOLETER MILL |
27'' ENTOLETER MILL SERIAL NUMBER 7830; 25 HP - 27'' ENTOLETER MILL SERIAL NUMBER 7830. COMPLETE WITH 25 HP, 230/460V, 3 PHASE MOTOR. APPROXIMATE OVERALL DIMENSIONS 40_ W X 43_ D X 60_ H (OFF LEGS)
|
🔒 Subscribe | ||
|
|
SLY | STJ-64-6 |
12/2022 SLY STJ-64-6 DUST COLLECTOR
217 SQ. FT. UNUSED STAINLESS SLY DUST COLLECTOR MODEL STJ-64-6 UNIT IS UNUSED. SERIAL # 32399. TOP BAG REMOVAL DESIGN. 217 SQUARE FEET OF FILTER AREA. ORIGINAL DESIGN WAS FOR 900 CFM OF CARBON COATED GRAPHITE DUST AT 175F, 20_ W.G. DEPENDING ON AIR TO CLOTH RATIO DESIGN THIS COLLECTOR COULD BE USED FOR UP TO 1500 CFM. 316 AND 316L STAINLESS STEEL MILL FINISH CONSTRUCTION FOR CLEAN AIR AND DIRTY AIR SIDES. EXTERNAL STRUCTURES ON THE COLLECTOR ITSELF ARE ALSO STAINLESS. VITON DOOR GASKETS. NEMA 7/9 CONTROL ENCLOSURE W/ MP-404-6 SEQUENCE TIMER W/ PRESSURE MODULE ~ 0-10_ W.G. (MOUNTED & WIRED TO SOLENOIDS BY SLY W/ RIGID CONDUIT) ~ 1/60/120 VAC POWER. SAFETY CAGE, LADDER, PLATFORM WITH AUTO CLOSE GATE AND HANDRAIL FOR TOP ACCESS FOR BAG REMOVAL. GOYEN AIR SOLENOIDS MODEL RCA3-6VFD. 11O 2O OVERALL LENGTH (WITHOUT LEGS). 20O- 4O OVERALL HEIGHT WITH LADDER AND HANDRAIL AND CAGE. 32O X 48O COLLECTOR WIDTH AND DEPTH. 9O- 2O BELOW TUBE SHEET. 8O DIAMETER DIRTY AIR INLET. 8O X 8O BOTTOM OUTLET. 6O DIAMETER CLEAN AIR OUTLET. 14 _O DIAM ACCESS HATCH. EXPLOSION PROOF TIMER. SOLENOID BOX COMPLETE WITH CAGES. DRAWING ON FILE.
|
🔒 Subscribe | |
|
|
SCHENCK | 39CSER4 |
NEW SCHENCK 39CSER4 FOOD GRADE STAINLESS STEEL BAG HOUSE. FOOD GRADE UNIT WITH PULSE JET CLEANING. COMPLETE WITH TIMER AND EXPLOSION VENT SYSTEM. RATED FOR 1.25 PSI AT 200F. HOPPER HAS TWO BOLTED AND GASKETED CLEAN OUT-INSPECTION PORTS. DESIGN IS FOR QUICK CLEAN HAND OPERATED LATCHES FOR QUICK OPENING AND CLEANING. COLLECTOR HAS 24'' DIAMETER CV TECHNOLOGY INTERCEPTOR FLAMELESS EXPLOSION VENTING SYSTEM WITH RUPTURE DISC AND FLAME ARRESTOR COMBINATION FOR EXPLOSION VENTING INDOORS. MAXIMUM KST IS 250. MODEL FTZU 08 ATEX 0367X TOP SECTION IS 48_ DIAMETER X 46_ HIGH. BOTTOM CONE IS 48_ DIAMETER X 59_ TALL. UNIT HAS ONE 10_ DIAMETER OUTLET FLANGE AND ONE 18_ CLEANOUT AND FOUR AIRPADS. TWO UNITS AVAILABLE: BASICALLY IDENTICAL EXCEPT ONE HOPPER IS SLIGHTLY SHORTER THAN THE OTHER. S/N: 1100100702-16C1-1
|
🔒 Subscribe | |
|
|
BUHLER |
BUHLER HORIZONTAL MOUNTED BIN VENT FILTERS, 58 SQUARE FOOT FILTER AREA, PULSE JET CLEANING, CARBON STEEL CONSTRUCTION, 16 BAGS (APPROX 5.5'' DIAMETER X 54'' LONG), MOUNTED HORIZONTALLY. COMPRESSED AIR PULSE JET CLEANING DESIGN. MOUNTING FLAGE OUTSIDE DIMENSIONS ARE 28'' X 61''. HEIGHT OF FILTER IS 280. CLEAN AIR PLENUM ADD 16'' IF ADDITIONAL LENGTH. TWO COLLECTORS HAVE FANS. NEW YORK BLOWER COMPACT GI FAN, MODEL 106 UNIV. (WHEN APPLICABLE) COMPLETE WITH 2 HP, 3450 RPM, 143T FRAME; 208-230-460-3-60 MOTOR.
|
🔒 Subscribe | ||
|
|
CURTIS WRIGHT BENSHAW | RB2-1-S-156A-14C |
CURTIS WRIGHT BENSHAW RB2-1-S-156A-14C SOFT STARTER 156 AMP FULL LOAD CONTINUOUS 3 PH 600 VAC S/N: S201108657-1-1
|
🔒 Subscribe | |
|
|
ABB | OS400J03 |
ABB OS400J03 GENERAL PURPOSE SWITCH 600VAC 400A
|
🔒 Subscribe | |
|
|
NUTTALL | 92G57645 |
NUTTALL 92G57645 GEAR REDUCER WITH 3 HP MOTOR. RATIO: 70.62:1. STYLE #: 92G57645. CATALOG #: G182T43T. 3 HP 25 RPM OUTPUT. S/N: 9209-1. 3 HP PACEMAKER MOTOR, 230/460 V, 9.3/4.65 A, 1735 RPM, 3 PH, 60 HZ, 182YZ FRAME. 2" DIAMETER OUTPUT SHAFT.
|
🔒 Subscribe | |
|
|
585 GALLON STAINLESS STEEL TANK: 51'' DIAMETER X 66'' STRAIGHT SIDE STAINLESS STEEL TANK. CONICAL BOTTOM WITH 2_ FLANGED OUTLET. DRAIN FLANGE HAS 12'' VERTICAL CLEARANCE UNDER THE TANK. 2_ DIAMETER PIPE COIL INSIDE OF TANK FOR HEATING OR COOLING. TANK IS OPEN TOP WITH REMOVABLE COVER AND WITH A BRIDGE FOR SUPPORTING PORTABLE MIXER (NOT INCLUDED). TANK HAS THREE 2_ FLANGED OUTLETS ON SIDE, ONE 3_ FLANGED OUTLET; 1-1/2_ NPT; ONE 1_ NPT ON SIDE. TANK ORIGINALLY HAD BLACK FOAM INSULATION ON OUTSIDE. TANK HAS 4_ STAINLESS STEEL ANGLE LEGS WITH 8_ X 10_ STAINLESS PLATE FEET.
|
🔒 Subscribe | |||
|
|
585 GALLON STAINLESS STEEL TANK: 51'' DIAMETER X 66'' STRAIGHT SIDE STAINLESS STEEL TANK. CONICAL BOTTOM WITH 2_ FLANGED OUTLET. DRAIN FLANGE HAS 12_ VERTICAL CLEARANCE UNDER THE TANK. 2_ DIAMETER PIPE COIL INSIDE OF TANK FOR HEATING OR COOLING. TANK IS OPEN TOP WITH REMOVABLE COVER AND WITH A BRIDGE FOR SUPPORTING PORTABLE MIXER (NOT INCLUDED). TANK HAS THREE 2_ FLANGED OUTLETS ON SIDE, ONE 3_ FLANGED OUTLET; 1-1/2_ NPT; ONE 1_ NPT ON SIDE. TANK ORIGINALLY HAD BLACK FOAM INSULATION ON OUTSIDE. TANK HAS 4_ STAINLESS STEEL ANGLE LEGS WITH 8_ X 10_ STAINLESS PLATE FEET.
|
🔒 Subscribe | |||
|
|
500 GALLON STAINLESS STEEL TANK WITH PIPE COILS 500 GALLON STAINLESS STEEL TANK: 42'' DIAMETER X 66'' STRAIGHT SIDE. SLOPING BOTTOM TO THE CENTER TO GIVE FULL DRAINAGE. 2_ DIAMETER PIPE COIL INSIDE OF TANK FOR HEATING OR COOLING. TANK IS OPEN TOP WITH LOOSE HINGED COVERS AND A BRIDGE FOR SUPPORTING PORTABLE MIXER (NOT INCLUDED). TANK HAS A 2_ FLANGED CENTER DRAIN AND CLEARANCE UNDER THE OUTLET FLANGE IS 14.5_. TANK HAS THREE 2_ FLANGED OUTLETS ON SIDE, ONE 3_ FLANGED OUTLET; 1-1/2_ NPT; ONE 1_ NPT ON SIDE. TANK ORIGINALLY HAD BLACK FOAM INSULATION ON OUTSIDE. THE PHOTOGRAPH DEPICTS SOME ADHESIVE AND BLACK FOAM INSULATION LEFT ON OUTSIDE OF TANK. TANK HAS 3_ STAINLESS STEEL ANGLE LEGS WITH 8_ X 10_ STAINLESS PLATE FEET.
|
🔒 Subscribe | |||
|
|
LAIDIG |
LAIDIG 12" DIAMETER X 150" LONG STAINLESS STEEL SCREW CONVEYOR. 12'' DIAMETER X 150'' LONG LAIDIG STAINLESS STEEL TUBULAR SCREW CONVEYOR. OVERALL LENGTH IS 160'' INCLUDING DRIVE SPROCKET. 26'' X 29'' FEED HOPPER, STAINLESS STEEL; BOLTED REMOVEABLE TOP COVER. TUBE OF CONVEYOR IS 12 GA 304-L STAINLESS STEEL. 13'' INLET DIAMETER. 14'' X 14'' OUTLET PORT. SWING UP INSPECTION COVER ON DISCHARGE. MOTION DETECTOR SWITCH ON NON-DRIVEN END OF CONVEYOR. GEAR REDUCER AND 2-BELT SHEAVE. TRANSLUCENT VIEW PORTS IN FEE HOPPER APPROX 10'' X 22''. EXCELLENT CONDITION. FREELY HAND ROTATES. NO MOTOR.
|
🔒 Subscribe | ||
|
|
PRATER INDUSTRIES | PAV-10C |
PRATER INDUSTRIES PAV-10C ROTARY AIRLOCK FEEDER S/N: 950066. CARBON STEEL. STAINLESS STEEL ADJUSTABLE TIPS ON ROTOR. NO DRIVE. 10_ DIAMETER FLANGED INLET; 8_ FLANGED OUTLET, VALVE HEIGHT: 15.0_.
|
🔒 Subscribe | |
|
|
MAC | 19RTC1 |
MAC 19RTC1 PULSE JET DUST FILTER. CARBON STEEL HOUSING WITH FLANGED BASE MOUNTING (UNIT MEASURES 29" TO TOP COVER). 5" AIR INLET SLEEVE. ROUND TOP REMOVAL. COMPLETE WITH TIMER, PULSE VALVE, AND DIFFERENTIAL PRESSURE GAUGE. BRACKET FOR MOUNTING EXHAUST FAN. IDEAL FOR DUST VENTING A ROTARY VALVE, ETC.
|
🔒 Subscribe | |
|
|
J.W. TODD CO. | U-TROUGH TWIN SCREW CONVEYOR |
9'' X 6' DUPLEX J.W. TODD CO. U-TROUGH TWIN SCREW CONVEYORLIGHT TO MEDIUM DUTY SCREW CONVEYOR MADE OF CARBON STEEL CONSTRUCTION. TWIN 9'' X 6_-3_ AUGERS (STANDARD PITCH RIGHT SIDE, HALF PITCH LEFT SIDE). 10_ X 20_ FLANGED PRODUCT INLET AND DISCHARGE. THE BOLT-ON COVER IS 55_ LONG WITH FULL SHROUDS. AUGERS ARE INDIVIDUALLY POWERED BY A 1HP, 208-230/460V, 3 PHASE (LEFT SIDE) AND 2HP, 208-230/460V, 3 PHASE (RIGHT SIDE).
|
🔒 Subscribe | |
|
|
CLEAN GAS SYSTEMS | DYNASCRUB I |
CLEAN GAS SYSTEMS DYNASCRUB I WET SCRUBBER SIZE 24 CAPACITY: 1600ACFM ALL STAINLESS STEEL. BLOWER REQUIRES 230/460 VOLTS, 60HZ, 3 PHASE POWER WITH INCLUDED SPEED CONTROLLER.
|
🔒 Subscribe | |
|
|
CINCINNATI FAN | RBE-13 |
CINCINNATI FAN RBE-13 RADIAL BLADE EXHAUSTER 9,922 CFM @ 17'' SP 75 HP. 9,922 CFM @ 17_ SP AT 73.5 BHP. ROTATION: CLOCKWISE UP BLAST.WHEEL TYPE: SHROUDED, 100%. MOTOR IS A SIEMENS, 75 HP, 460 VOLT, 3565 RPM, TEFC MILL & CHEMICAL DUTY, FRAME: 365 TS. FAN IS UNUSED. PAINTED CARBON STEEL CONSTRUCTION. S/N: 906020
|
🔒 Subscribe | |
|
|
SOTA EQUIPMENT | TF2PWD-19 |
SOTA EQUIPMENT TF2PWD-19 BULK BAG / BOX 2-POST WEIGH FILL SYSTEM. PREVIOUSLY USED TO PACKAGE 1,000 LB BOXES. 2-POST WEIGH, BOX FILLING SYSTEM MDL. TF2PWD-19, S/N 07-1370, APPROX. 54_ X 64_ X 19_H MOTORIZED CONVEYOR MOUNTED ON SCALE BASE, 3/4 HP ELECTRIC MOTOR 208-230/460V, 3 PH (PNEUMATIC LINES CUT, NO READ OUT) W/APPROX. 43_ X 51_ DOMED BOX FILLING COVER HOOD W/FILL TUBE & SOTA EQUIPMENT APPROX. 54_ X 64_ X 19_H MOTORIZED STAGING CONVEYOR, 3/4 HP ELECTRIC MOTOR, 208-230/460V, 3 PH
|
🔒 Subscribe | |
|
|
PLASTIC OUTDOOR STORAGE UNIT (DOES NOT INCLUDE CONTENTS)
|
🔒 Subscribe | |||
|
|
OVERHEAD ROLL DOWN DOOR RIGGING
|
🔒 Subscribe | |||
|
|
U.S. RANGE |
U.S. RANGE GAS RANGE RIGGING
|
🔒 Subscribe | ||
|
|
TWINGRILL | DOUBLE-SIDE CONTACT BELT GRILLING SYSTEM |
TWINGRILL DOUBLE-SIDE CONTACT BELT GRILLING SYSTEM INCLUDES BRAND NEW TEFLON HOOKING BELT
|
🔒 Subscribe | |
|
|
KRUNCHERS |
KRUNCHERS LIVE BOTTOM FEEDER, 12" WIDE X 5' LONG CONVEYOR, CONVEYOR HAS RUBBER COATED RODS APPROX. 5/8" DIA. W/ 5/8" SPACING, HOPPER 5' WIDE X 7' LONG BY 3' DEEP, S/S, 1 HP, 230/460 VOLT, 3 PHASE VARIABLE SPEED MOTOR
|
🔒 Subscribe | ||
|
|
VANMARK | X CC FEEDER |
VANMARK X CC FEEDER, DUAL FEED ROLLERS, 24" LONG, 1/2 HP , 230/460 VOLT, 3 PHASE MOTOR, S/S
|
🔒 Subscribe | |
|
|
VANMARK |
VANMARK ELEVATOR, 16" VERTICAL LIFT OF 9', ALL S/S, 16" DIAMETER, 2 HP, 230/460 VOLT, 3 PHASE MOTOR, 38" FEED HT9' DISCHARGE HT3' X 2' X 2' DEEP, APPROX. SZ. OF HOPPER
|
🔒 Subscribe | ||
|
|
MATEER | 31-A |
MATEER 31-A FILLER DIGI COUNT, 1/3 HP, 230/460 VOLT, SLOW SPEED AGITATOR, S/S CONTACT, CUT OFF VALVE ON THE END OF AUGER, 3/4" DIA1 HP AUGER DRIVE, 230-460 VOLT, LIQUID FILLING HEAD
|
🔒 Subscribe | |
|
|
KASON | K-24-SS |
KASON K-24-SS SIFTER 440 VOLT 3 PHASE, 1/2 HP, S/S PRODUCT CONTACT, 2 DECKS (1 SEPARATION) S/S COVER, SCREEN SIZE 279 WITH 054 WIRE, NO SELF CLEANING SCREEN, NEW SPRINGS & BEARINGS IN MOTOR S/N: KC-1071
|
🔒 Subscribe | |
|
|
CONTINENTAL | 318PDS |
CONTINENTAL 318PDS CAN SEAMER SET 603 STEAM FLOW, STD. HEAD, PADDLE PACKER (MISSING PADS), 5 HP, 1160 PRM, 230/460 VOLT S/N: 607
|
🔒 Subscribe | |
|
|
LABEL AIRE | 2111 |
LABEL AIRE 2111 PRESSURE SENSITIVE LABELER 7 1/2" WIDE CONVEYOR BELT, 15" LONG BY 6" HIGH WRAP BELT, USED ON 1 GAL. PAINT CANS, HAS LUG ORIENTATION S/N: 6-37078304
|
🔒 Subscribe | |
|
|
CME | HMS-VB-HT-30SS |
30-HP HAMMER-MILL, CME MODEL #HMS-VB-HT-30SS S/N: 1906233
|
🔒 Subscribe | |
|
|
2017 | TRANTER | GCO-052-L-5-SR-49 |
2017 TRANTER GCO-052-L-5-SR-49 PLATE HEAT EXCHANGER ''SUPERCHANGER'' - 273.9 SQ. FT. APPEARS TO BE UNUSED. S/N: 01SC3180 DRAWING # D-6-167323-4 SHOP # 167323 FITTINGS: 4'' AND 6'' NET WEIGHT 3925 LBS. RATED AT 200 PSI & FULL VACUUM AT 300F.
|
🔒 Subscribe |
|
|
HINKLE LOCTITE | 97101 |
HINKLE LOCTITE 97101 MMD PUMP SYSTEM 1000. COMPLETE WITH ELECTRIC HEATING ELEMENT, PUMP, AND RESERVOIR. UNUSED.
|
🔒 Subscribe | |
|
|
PHILADELPHIA | PV-5 PTM |
7.5HP PHILADELPHIA PV-5 PTM VERTICAL LIQUID MIXER WITH FLANGE MOUNTING. RAISED FACE MOUNTING FLANGE INSTALLS TO AN APPROXIMATE 17.5_ BOLT CIRCLE. STAINLESS STEEL 2.5_ IMPELLER SHAFT WITH A 6-BOLT (4.25_ B.C. SHAFT ADAPTER). OUTPUT RPM: 84 REQUIRES 230/460 VOLT, 60HZ, 3 PHASE AC.
|
🔒 Subscribe | |
|
|
16'' DIAMETER X 21'' LENGTH STAINLESS STEEL SHELL AND TUBE HEAT EXCHANGER 16'' DIAMETER X 21'' LENGTH HYDROLYSIS CLARIFIER COOLER S/N: 55-EX-0550
|
🔒 Subscribe | |||
|
|
2019 | SPX TECHNOLOGY APV HEAT TRANSFER | N35-M-11 |
2019 SPX TECHNOLOGY APV HEAT TRANSFER N35-M-11 PLATE HEAT EXCHANGER METHANOL STRIPPER BOTTOMS COOLER S/N: G2017000071. 177.1 SQUARE FEET OF HEAT TRANSFER. HASTELLOY C276 PROCESS LIQUID CONTACT PARTS. PIPE CONNECTIONS: 3'' X 150 #, SCHEDULE 40; ALL 4 NOZZLES; HASTELLOY C276 (ONE SIDE); 316L STAINLESS STEEL (OTHER SIDE). EXCHANGER HAS 48 PLATES INSTALLED, EXPANDABLE TO 121 PLATES, HASTELLOY C276. DIMENSIONS: HEIGHT: 63-3/8", BASE LENGTH: 41-11/16", WIDTH: 19-3/16". DRY WEIGHT: 1620 LBS. OPERATING TEMPERATURE AND PRESSURE RATING: SIDE A1-A2: MAX/MIN 200 PSI/FULL VACUUM @ 250 F/-25 F; SIDE B1-B2: MAX/MIN 200 PSI/FULL VAC @ 225 F/-25 F. STAINLESS STEEL SPRAY SCREENS (UNUSED).
|
🔒 Subscribe |
|
|
JOHNSON KADANT | 2750 ELSNARF |
JOHNSON KADANT 2750 ELSNARF HOT OIL ROTARY JOINT 3.5'' PART NUMBER MODEL 2750 ELSNARFZQ. 3-1/2''. DI. SUPER- B JOHNSON JOINT WITH ANTIMONY SEAL RING. TECHNICAL MANUALS ON ELECTRONIC FILE.
|
🔒 Subscribe | |
|
|
INDEECO | 201-327114 TFXU 30_28 |
INDEECO 201-327114 TFXU 30_28 ELECTRIC DUCT HEATER 40''X30''X28'' 40 KW 480/3/1/24 48.11 AMPS 413 FPM MINIMUM AIRFLOW S/N: 11-EDH-01_1-1165
|
🔒 Subscribe | |
|
|
SHELL AND TUBE HEAT EXCHANGER; CARBON STEEL; USED 4'' DIAMETER INLET/OUTLET 2 1/2'' DIAMETER INLET/OUTLET 4''- 9'' LONG 10'' DIAMETER SHELL CARBON STEEL SHELL CONSTRUCTION. STAINLESS STEEL TUBES AND TUBESHEET FIXED TUBESHEET
|
🔒 Subscribe | |||
|
|
NORTHERN BLOWER | 6650 |
NORTHERN BLOWER SIZE 9 BLOWER, TYPE 6650, CLASS 2, 5/3 HP VARIABLE, 230/460V, 3 PH. S/N: 56642.09-01. NORTHERN BLOWER FAN SIZE 9 BLOWER TYPE 6650, CLASS 2. NORTHERN BLOWER SIZE 9 BLOWER, TYPE 6650, CLASS 2, 5/3 HP VARIABLE, - USED 2,000 CFM @ 8_ SP
|
🔒 Subscribe | |
|
|
SUMITOMO | SM-HYPONIC |
SUMITOMO SM-HYPONIC RIGHT ANGLE GEAR MOTOR - OUTPUT SPEED OF 87.5 - 1HP. OUTPUT RPM: 87.5. 20:1 RATIO ON THE GEARBOX. SHAFT: 1.38_. POWER REQUIRED: 230/460V, 3 PH, 60 HZ. OUTPUT SPEED = 91 RPM.
|
🔒 Subscribe | |
|
|
SALINA VORTEX CORPORATION | D6-3SSY-SL-P10-SM1-SB- |
6'' SALINA VORTEX 3-WAY S/S DIVERTER VALVE MODEL D6-3SSY-SL-P10-SM1-SB-V81460 6''SALINA VORTEX CORPORATION 3-WAY STAINLESS STEEL PNEUMATIC CONVEYING TYPE DIVERTER VALVE. MODEL D6-3SSY-SL-P10-SM1-SB-V81460; SERIAL NUMBER V81460-017, PNEUMATIC ACTUATORS. APPEARS TO BE XP ELECTRICALS.
|
🔒 Subscribe | |
|
|
HOSOKAWA MIKROPUL | 11_ |
STAINLESS STEEL CYCLONE SEPARATOR. ALL CONTINUOUS FILLET WELD CONSTRUCTION. 2-PIECE BOLT-ON STAND. ROTATING 6_ SLEEVE OUTLET FOR THE SEPARATED AIR. OVERALL HEIGHT OF CYCLONE: 56.5_.
|
🔒 Subscribe | |
|
|
DODGE | MT |
5 HP DODGE MT SHAFT MOUNT DRIVE, CLASS II, 15 RPM. SLUDGE HOPPER: 5 CUBIC YARD STAINLESS STEEL TWIN SHAFTED WET CAKE BIN WITH LIVE BOTTOM HOPPER. HOPPER DIMENSIONS: 6'-3'' TALL X 4'-5'' WIDE X 10' LONG. INCLUDES TWO 12'' DIAMETER PADDLE MIXER LUMP BREAKERS. HOPPER, PADDLE MIXERS AND ALL CONTACT PARTS ARE 304 STAINLESS STEEL. DRAWING AND MANUAL ON FILE.
|
🔒 Subscribe |
WAUKESHA CHERRY BURRELL 97-20457
TANKS, PUMPS & STORAGE EQUIPMENT
WAUKESHA CHERRY BURRELL 97-20457 CENTRIFUGAL PUMP, 2" IN X 1 1/2" OUT, 2 HP, 3450 RPM MOTOR, 230/460...
Hammer Price:
🔒
TRI CLOVER C216MD211-S
TANKS, PUMPS & STORAGE EQUIPMENT
TRI CLOVER C216MD211-S CENTRIFUGAL PUMP, 2 1/2" IN X 1 1/2" OUT, TRI CLAMP FITTINGS, S/S, 7.5 HP, 35...
Hammer Price:
🔒
SINE SPS-35SR-011
TANKS, PUMPS & STORAGE EQUIPMENT
SINE SPS-35SR-011 POSITIVE DISPLACEMENT PUMP, 3" IN AND OUT, BEVEL SEAT SANITARY, 3 HP, 230/460 VOLT...
Hammer Price:
🔒
FELDMEIER
CHEMICAL PROCESSING EQUIPMENT
FELDMEIER TUBE IN TUBE HEAT EXCHANGER, ALL S/S, TRIPLE TUBE, 2 1/2" OUTER TUBE, 2" CENTER TUBE, 6 RU...
Hammer Price:
🔒
GORING KERR TEK 21
MISC
GORING KERR TEK 21 METAL DETECTOR, 4" X 10" APERTURE, SET UP W/ 2 3/4" X 6 3/4" CLEARANCE THROUGH AP...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
GRAVITY FILLER OVERFLOW, ALL S/S SET ON 603 X 700 CAN, HAS TIMING SCREW DISCHARGE W/TOPPER TO ESTABL...
Hammer Price:
🔒
ROYSON ENGINEERING CO. CTT-35
SURFACE FINISHING EQUIPMENT
ROYSON ENGINEERING CO. CTT-35 VIBRATORY FINISHER. 35 CUBIC FOOT CAPACITY. 2 X 15 HP DIRECT DRIVE MOT...
Hammer Price:
🔒
INTEGRATED SOLUTIONS, DIV OF J. A. KING COMPANY
PACKAGING EQUIPMENT
ONE GALLON BOTTLE OR PAIL WEIGH FILLER. DESIGNED TO FILL ONE GALLON PAILS OR BOTTLES AT A TIME....
Hammer Price:
🔒
27'' ENTOLETER MILL
MISC
27'' ENTOLETER MILL SERIAL NUMBER 7830; 25 HP - 27'' ENTOLETER MILL SERIAL NUMBER 7830. COMPLETE WIT...
Hammer Price:
🔒
SLY STJ-64-6
DUST COLLECTION EQUIPMENT
12/2022 SLY STJ-64-6 DUST COLLECTOR
217 SQ. FT. UNUSED STAINLESS SLY DUST COLLECTOR MODEL STJ-64-6 U...
Hammer Price:
🔒
SCHENCK 39CSER4
DUST COLLECTION EQUIPMENT
NEW SCHENCK 39CSER4 FOOD GRADE STAINLESS STEEL BAG HOUSE. FOOD GRADE UNIT WITH PULSE JET CLEANING. ...
Hammer Price:
🔒
BUHLER
DUST COLLECTION EQUIPMENT
BUHLER HORIZONTAL MOUNTED BIN VENT FILTERS, 58 SQUARE FOOT FILTER AREA, PULSE JET CLEANING, CARBON S...
Hammer Price:
🔒
CURTIS WRIGHT BENSHAW RB2-1-S-156A-14C
ELECTRICAL AND POWER GENERATION EQUIPMENT
CURTIS WRIGHT BENSHAW RB2-1-S-156A-14C SOFT STARTER 156 AMP FULL LOAD CONTINUOUS 3 PH 600 VAC S/N: S...
Hammer Price:
🔒
ABB OS400J03
ELECTRICAL AND POWER GENERATION EQUIPMENT
ABB OS400J03 GENERAL PURPOSE SWITCH 600VAC 400A...
Hammer Price:
🔒
NUTTALL 92G57645
MISC
NUTTALL 92G57645 GEAR REDUCER WITH 3 HP MOTOR. RATIO: 70.62:1. STYLE #: 92G57645. CATALOG #: G182T43...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
585 GALLON STAINLESS STEEL TANK: 51'' DIAMETER X 66'' STRAIGHT SIDE STAINLESS STEEL TANK. CONICAL BO...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
585 GALLON STAINLESS STEEL TANK: 51'' DIAMETER X 66'' STRAIGHT SIDE STAINLESS STEEL TANK. CONICAL BO...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
500 GALLON STAINLESS STEEL TANK WITH PIPE COILS 500 GALLON STAINLESS STEEL TANK: 42'' DIAMETER X 66'...
Hammer Price:
🔒
LAIDIG
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
LAIDIG 12" DIAMETER X 150" LONG STAINLESS STEEL SCREW CONVEYOR. 12'' DIAMETER X 150'' LONG LAIDIG ST...
Hammer Price:
🔒
PRATER INDUSTRIES PAV-10C
MISC
PRATER INDUSTRIES PAV-10C ROTARY AIRLOCK FEEDER S/N: 950066. CARBON STEEL. STAINLESS STEEL ADJUSTABL...
Hammer Price:
🔒
MAC 19RTC1
DUST COLLECTION EQUIPMENT
MAC 19RTC1 PULSE JET DUST FILTER. CARBON STEEL HOUSING WITH FLANGED BASE MOUNTING (UNIT MEASURES 29"...
Hammer Price:
🔒
J.W. TODD CO. U-TROUGH TWIN SCREW CONVEYOR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
9'' X 6' DUPLEX J.W. TODD CO. U-TROUGH TWIN SCREW CONVEYORLIGHT TO MEDIUM DUTY SCREW CONVEYOR MADE O...
Hammer Price:
🔒
CLEAN GAS SYSTEMS DYNASCRUB I
DUST COLLECTION EQUIPMENT
CLEAN GAS SYSTEMS DYNASCRUB I WET SCRUBBER SIZE 24 CAPACITY: 1600ACFM ALL STAINLESS STEEL. BLOWER RE...
Hammer Price:
🔒
CINCINNATI FAN RBE-13
DUST COLLECTION EQUIPMENT
CINCINNATI FAN RBE-13 RADIAL BLADE EXHAUSTER 9,922 CFM @ 17'' SP 75 HP. 9,922 CFM @ 17_ SP AT 73.5 B...
Hammer Price:
🔒
SOTA EQUIPMENT TF2PWD-19
PACKAGING EQUIPMENT
SOTA EQUIPMENT TF2PWD-19 BULK BAG / BOX 2-POST WEIGH FILL SYSTEM. PREVIOUSLY USED TO PACKAGE 1,000 L...
Hammer Price:
🔒
TWINGRILL DOUBLE-SIDE CONTACT BELT GRILLING SYSTEM
FOOD PROCESSING AND RESTAURANT EQUIPMENT
TWINGRILL DOUBLE-SIDE CONTACT BELT GRILLING SYSTEM INCLUDES BRAND NEW TEFLON HOOKING BELT...
Hammer Price:
🔒
KRUNCHERS
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
KRUNCHERS LIVE BOTTOM FEEDER, 12" WIDE X 5' LONG CONVEYOR, CONVEYOR HAS RUBBER COATED RODS APPROX. 5...
Hammer Price:
🔒
VANMARK X CC FEEDER
MISC
VANMARK X CC FEEDER, DUAL FEED ROLLERS, 24" LONG, 1/2 HP , 230/460 VOLT, 3 PHASE MOTOR, S/S...
Hammer Price:
🔒
VANMARK
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
VANMARK ELEVATOR, 16" VERTICAL LIFT OF 9', ALL S/S, 16" DIAMETER, 2 HP, 230/460 VOLT, 3 PHASE MOTOR,...
Hammer Price:
🔒
MATEER 31-A
PACKAGING EQUIPMENT
MATEER 31-A FILLER DIGI COUNT, 1/3 HP, 230/460 VOLT, SLOW SPEED AGITATOR, S/S CONTACT, CUT OFF VALVE...
Hammer Price:
🔒
KASON K-24-SS
MISC
KASON K-24-SS SIFTER 440 VOLT 3 PHASE, 1/2 HP, S/S PRODUCT CONTACT, 2 DECKS (1 SEPARATION) S/S COVER...
Hammer Price:
🔒
CONTINENTAL 318PDS
PACKAGING EQUIPMENT
CONTINENTAL 318PDS CAN SEAMER SET 603 STEAM FLOW, STD. HEAD, PADDLE PACKER (MISSING PADS), 5 HP, 116...
Hammer Price:
🔒
LABEL AIRE 2111
PACKAGING EQUIPMENT
LABEL AIRE 2111 PRESSURE SENSITIVE LABELER 7 1/2" WIDE CONVEYOR BELT, 15" LONG BY 6" HIGH WRAP BELT,...
Hammer Price:
🔒
CME HMS-VB-HT-30SS
MISC
30-HP HAMMER-MILL, CME MODEL #HMS-VB-HT-30SS S/N: 1906233...
Hammer Price:
🔒
2017 TRANTER GCO-052-L-5-SR-49
CHEMICAL PROCESSING EQUIPMENT
2017 TRANTER GCO-052-L-5-SR-49 PLATE HEAT EXCHANGER ''SUPERCHANGER'' - 273.9 SQ. FT. APPEARS TO BE U...
Hammer Price:
🔒
HINKLE LOCTITE 97101
TANKS, PUMPS & STORAGE EQUIPMENT
HINKLE LOCTITE 97101 MMD PUMP SYSTEM 1000. COMPLETE WITH ELECTRIC HEATING ELEMENT, PUMP, AND RESERVO...
Hammer Price:
🔒
PHILADELPHIA PV-5 PTM
MISC
7.5HP PHILADELPHIA PV-5 PTM VERTICAL LIQUID MIXER WITH FLANGE MOUNTING. RAISED FACE MOUNTING FLANGE ...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
16'' DIAMETER X 21'' LENGTH STAINLESS STEEL SHELL AND TUBE HEAT EXCHANGER 16'' DIAMETER X 21'' LENGT...
Hammer Price:
🔒
2019 SPX TECHNOLOGY APV HEAT TRANSFER N35-M-11
CHEMICAL PROCESSING EQUIPMENT
2019 SPX TECHNOLOGY APV HEAT TRANSFER N35-M-11 PLATE HEAT EXCHANGER METHANOL STRIPPER BOTTOMS COOLER...
Hammer Price:
🔒
JOHNSON KADANT 2750 ELSNARF
MISC
JOHNSON KADANT 2750 ELSNARF HOT OIL ROTARY JOINT 3.5'' PART NUMBER MODEL 2750 ELSNARFZQ. 3-1/2''. DI...
Hammer Price:
🔒
INDEECO 201-327114 TFXU 30_28
INDUSTRIAL AND COOLING HEATING EQUIPMENT
INDEECO 201-327114 TFXU 30_28 ELECTRIC DUCT HEATER 40''X30''X28'' 40 KW 480/3/1/24 48.11 AMPS 413 FP...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
SHELL AND TUBE HEAT EXCHANGER; CARBON STEEL; USED 4'' DIAMETER INLET/OUTLET 2 1/2'' DIAMETER INLET/O...
Hammer Price:
🔒
NORTHERN BLOWER 6650
DUST COLLECTION EQUIPMENT
NORTHERN BLOWER SIZE 9 BLOWER, TYPE 6650, CLASS 2, 5/3 HP VARIABLE, 230/460V, 3 PH. S/N: 56642.09-01...
Hammer Price:
🔒
SUMITOMO SM-HYPONIC
MISC
SUMITOMO SM-HYPONIC RIGHT ANGLE GEAR MOTOR - OUTPUT SPEED OF 87.5 - 1HP. OUTPUT RPM: 87.5. 20:1 RATI...
Hammer Price:
🔒
SALINA VORTEX CORPORATION D6-3SSY-SL-P10-SM1-SB-
MISC
6'' SALINA VORTEX 3-WAY S/S DIVERTER VALVE MODEL D6-3SSY-SL-P10-SM1-SB-V81460 6''SALINA VORTEX CORPO...
Hammer Price:
🔒
HOSOKAWA MIKROPUL 11_
DUST COLLECTION EQUIPMENT
STAINLESS STEEL CYCLONE SEPARATOR. ALL CONTINUOUS FILLET WELD CONSTRUCTION. 2-PIECE BOLT-ON STAND. R...
Hammer Price:
🔒
DODGE MT
MISC
5 HP DODGE MT SHAFT MOUNT DRIVE, CLASS II, 15 RPM. SLUDGE HOPPER: 5 CUBIC YARD STAINLESS STEEL TWIN ...
Hammer Price:
🔒