CNC Fabrication Industrial Machinery from Multiple Operating Facilities

2014 HAAS VF-6 CNC MACHINE CENTER WITH 4TH AXIS ROTARY TABLE; HRT-310; TRAVELS: X-AXIS: 64IN Y-AXIS: 32IN Z-AXIS: 30IN RPM: 8100 TABLE SIZE: 64 X 28 SPINDLE: CAT40 40 ATC 30 HP HAAS CNC CONTROL COOLANT TANK AND PUMP CHIP AUGER APPROX. WEIGHT: 21,000 LBS EQUIPPED WITH: HAAS HRT-450 ROTARY TABLE 4TH-AXIS DRIVE AND WIRING PROGRAMMABLE COOLANT CHIP AUGER S/N:1119109

2019 HAAS ST-30 CNC TURNING CENTER - CNC LATHE CAPACITIES CHUCK SIZE: 10.0 IN (A2-6) MAXIMUM PART SWING: 21.0 IN (533 MM) MAX CUTTING DIAMETER (BOT TURRET): 15.00 IN (381 MM) MAX CUTTING DIAMETER (BMT65): 13.75 IN (349 MM) BAR CAPACITY: 3.00 IN (76 MM) BETWEEN CENTERS / MAX CUTTING LENGTH: 32.5 IN (826 MM) AXIS TRAVELS X-AXIS TRAVEL: 9.40 IN (239 MM) Z-AXIS TRAVEL: 32.50 IN (826 MM) SPINDLE MAX SPINDLE POWER: 30 HP (22.4 KW) MAX SPEED: 3400 RPM (STANDARD) SPINDLE NOSE: A2-6 SPINDLE BORE: 3.50 IN (88.9 MM) MAX TORQUE: ~300 FT-LB @ 500 RPM (407 NM) OPTIONAL GEARBOX TORQUE: ~1000 FT-LB @ 150 RPM (1356 NM) TURRET & TOOLS TURRET TYPE: 12-STATION BOT TURRET FEEDRATES RAPID X: ~945 IPM (24 M/MIN) RAPID Z: ~945 IPM (24 M/MIN) GENERAL COOLANT CAPACITY: ~55 GAL (208 L) AIR REQUIREMENTS: ~4 SCFM @ 100 PSI (113 L/MIN @ 6.9 BAR) MACHINE WEIGHT: ~10,900 LB (4940 KG) TYPICAL FOOTPRINT: 151 L 70 W 79 H (WITHOUT CONVEYOR)

54" BULLARD CUTMASTER VERTICAL TURRET LATHE - 54" BULLARD CUTMASTER VERTICAL TURRET LATHE. THE 54 CUTMASTER HAS EXTENDED COLUMN. MAX HEIGHT: AROUND 50 INCHES. CHUCK DIMENSION: 48 INCHES ON OD. MACHINE SPECIFICATIONS: TABLE DIAMETER: 54 INCHES. MAXIMUM SWING: 54 INCHES. HEIGHT UNDER RAIL: 44 INCHES. TABLE SPEEDS: 4.4 TO 160 RPM. MAIN MOTOR POWER: 30 HP (SOME MODELS UP TO 40 HP). FEEDS: 0.004 TO 0.500 INCHES PER REVOLUTION. MACHINE WEIGHT: APPROXIMATELY 38,000 TO 60,000 LBS, DEPENDING ON CONFIGURATION. HEAD CONFIGURATIONS & TRAVELS: TURRET HEAD: 5-POSITION TURRET. VERTICAL TRAVEL: 30 INCHES. HORIZONTAL TRAVEL: 34 INCHES. RAM HEAD: VERTICAL TRAVEL: 36 INCHES. HORIZONTAL TRAVEL: 34 INCHES. SIDE HEAD (IF EQUIPPED): VERTICAL TRAVEL: 44 INCHES. HORIZONTAL TRAVEL: 27 INCHES.

2021 PROVISUR SX330 SLICER WITH FORMAX SX HONING SYSTEM - INDUSTRIAL MEAT & CHEESE SLICING LINE - THROAT AREA: 6.3" X 13" - NUMBER OF PRODUCT DRIVES: 1 - PRODUCT LENGTH MAX: 39.4" - BLADE SPEED: 1,000-1,500 RPMS - BLADE RETRACT: STANDARD - ELECTRICAL REQUIREMENTS: 480V, 3P, 60HZ INCLUDES: FORMAX - SX HONING SYSTEM, 2 BLADES, LEG EXTENSION INSERT, CART FOR PARTS

2007 MAZAK MULTIPLEX MP6200Y CNC LATHE MAX SWING OVER BED: 23.6 INCH MAX TURNING DIAMETER: 12.6 INCH MAX TURNING LENGTH: 20.1 INCH BAR CAPACITY: 2.6 INCH SPINDLE NOSE: A2-6 SPINDLE BORE: 3 INCH STANDARD CHUCK SIZE: 8 INCH SPINDLE SPEED: 5,000 RPM MAIN SPINDLE MOTOR: 20 HP SUB SPINDLE MOTOR: 15 HP X-AXIS TRAVELS: 7.1 INCH Y-AXIS TRAVELS: 2 INCH Z-AXIS TRAVELS: 21.3 INCH X-AXIS RAPID TRAVERSE RATES: 1,181 IPM Y-AXIS RAPID TRAVERSE RATES: 1,575 IPM Z-AXIS RAPID TRAVERSE RATES: 787 IPM ATC: 12-STATIONS TOOL SIZE: 1 INCH OD TOOL BORING BAR: 1.6 INCH ELECTRICAL: 200V APPROXIMATE MACHINE DIMENSIONS: 108 INCH X 85 INCH X 80 INCH APPROXIMATE MACHINE WEIGHT: 16,940LBS EQUIPPED WITH MAZATROL 640MT PRO CONTROLLER

2022 OTC FD-V8L 6-AXIS INDUSTRIAL ROBOT - FD 21 CONTROLLER, SUMIG PLASMA CUTTER. NUMBER OF AXES: 6 PAYLOAD / MAX HANDLING LOAD: 8KG (17.6 LBS) REACH / WORKING RADIUS: 2,000 MM (78.7 INCH) STRUCTURE: VERTICAL ARTICULATED ROBOT ARM REPEATABILITY / POSITIONAL ACCURACY: 0.08 MM WORKING RANGE (ARM) J1 170 (50) ; J2: 155 TO +100 ; J3: 170 TO +260 (WRIST) J4 (SWING): 180 ; J5 (BEND): 50 TO +230 ; J6 (TWIST): 360 MAX. VELOCITY (ARM) J1: 3.40 RAD/S (195/S) ; J2: 3.49 RAD/S (200/S) ; J3: 3.49 RAD/S (200/S) (WRIST) J4: 7.50 RAD/S (430/S) ; J5: 7.50 RAD/S (430/S) ; J6: 10.99 RAD/S (630/S) WRIST LOAD (ALLOWABLE MOVEMENT) J4: 17.6 NM, J5: 17.6 NM, J6: 7.8 NM (ALLOWABLE MOVEMENT OF INERTIA) J4: 0.43 KGM2, J5: 0.43 KGM2, J6: 0.09 KGM2 WEIGHT: 273 KG (602 LBS)

2013 MITUTOYO CRYSTA APEX S7106 CMM MEASUREMENT RANGE (X/Y/Z): 700 X 1000 X 600 MM (APPROX. 27.6" X 39.4" X 23.6") RESOLUTION: 0.1 M (0.000004") GUIDE METHOD: AIR BEARINGS ON ALL AXES MAX. DRIVE SPEED (3D): 519 MM/S (APPROX. 20.4"/S) MAX. DRIVE ACCELERATION (3D): 2,309 MM/S2 (APPROX. 90.9"/S2) MAX. MEASURING SPEED: 8 MM/S REPEATABILITY: ~2.0 M ACCURACY (MPE) E1 (MPE): ~ (1.7 + 4L/1000) M (WITH SP25M PROBE) E1 (MPE): ~ (2.7 + L/250) M MACHINE WEIGHT: ~3350 KG (7392 LBS) MAX. TABLE LOAD: 1000 KG (2204 LBS) TEMPERATURE COMPENSATION: BUILT-IN SYSTEM FOR 16C TO 26C (60.8F TO 78.8F) EQUIPPED WITH RENISHAW PROBE CONTROLLER

2022 OTC FD-V8L 6-AXIS INDUSTRIAL ROBOT - FD 21 CONTROLLER, SUMIG PLASMA CUTTER. NUMBER OF AXES: 6 PAYLOAD / MAX HANDLING LOAD: 8KG (17.6 LBS) REACH / WORKING RADIUS: 2,000 MM (78.7 INCH) STRUCTURE: VERTICAL ARTICULATED ROBOT ARM REPEATABILITY / POSITIONAL ACCURACY: 0.08 MM WORKING RANGE (ARM) J1 170 (50) ; J2: 155 TO +100 ; J3: 170 TO +260 (WRIST) J4 (SWING): 180 ; J5 (BEND): 50 TO +230 ; J6 (TWIST): 360 MAX. VELOCITY (ARM) J1: 3.40 RAD/S (195/S) ; J2: 3.49 RAD/S (200/S) ; J3: 3.49 RAD/S (200/S) (WRIST) J4: 7.50 RAD/S (430/S) ; J5: 7.50 RAD/S (430/S) ; J6: 10.99 RAD/S (630/S) WRIST LOAD (ALLOWABLE MOVEMENT) J4: 17.6 NM, J5: 17.6 NM, J6: 7.8 NM (ALLOWABLE MOVEMENT OF INERTIA) J4: 0.43 KGM2, J5: 0.43 KGM2, J6: 0.09 KGM2 WEIGHT: 273 KG (602 LBS)

2024 HAFFNER TT-425 PROFILE DOUBLE HEAD MITRE SAW CUTTING AREA: 13.1 X 19.6 X 24.6 PIVOT ANGLE RANGE: 90 TO 22.5 (WITH INTERMEDIATE STOPS) TILTING & PIVOTING DEGREE: 90 AND 45 (BY PNEUMATIC CYLINDER) SAW BLADE MOTOR: 5.36 HP X 2 SAW BLADE SPEEDS: 2,800 RPM / 3,400 RPM SAW BLADE DIAMETER: 18.7 MIN CUTTING LENGTH AT 90 & 45: 17.71 PIVOTING RANGE: INWARDS 90- 22.5 WITH ACCURACY UP TO 0.1 TILTING RANGE: INWARDS PNEUMATICALLY 90- 45 COMPRESSED AIR SUPPLY: 100 PSI (7 BAR) AIR CONSUMPTION PER WORKING CYCLE: 2.12 CU. FT. EQUIPPED WITH: PNEUMATIC SAW BLADE FEED SYSTEM WITH ADJUSTABLE BLADE FEED SPEED VERTICAL AND HORIZONTAL PNEUMATIC CLAMPS STANDARD CUTTING LENGTHS VERY MINIMAL USE/VERY LOW HOURS

2019 HOMAG CENTATEQ N-300 NESTING CNC MACHINE WORKING AREA: -X-AXIS: 122" (3,100 MM) -Y-AXIS: 61" (1,550 MM) -Z-AXIS (STROKE): 9.6" (245 MM) SPINDLE: -POWER: 13 HP (10 KW) -SPEED: 24,000 RPM -TAPER: HSK F63 TOOL CHANGER: 8 ATC BORING UNIT: -SPINDLES: (7) INDEPENDENT VERTICAL SPINDLES (4 IN X, 3 IN Y) -MOTOR: 2-3 HP TABLE: -TYPE: S/C TECH MATRIX GROOVED PHENOLIC VACUUM TABLE -ZONES: 10 CNC-CONTROLLED VACUUM ZONES -POSITIONING: (1) X-AXIS & (1) Y-AXIS PNEUMATIC LOCATOR/POSITIONING RAIL POSITIONING SPEED (VECTOR): -X/Y AXES: 96 M/MIN (315 FPM) -Z-AXIS: 25 M/MIN (82 FPM)

2012 4,000 WATT 5' X 10' HANKWANG CH 5000 CO2 LASER LASER OUTPUT: 5,000 WATT (LIMITED TO 4000) PRC RESONATOR RACK AND PINION DRIVE 2 CUTTING GAS CIRCUITS, NITROGEN, OXYGEN. EDGE DETECTION NON CONTACT CAPACITIVE HEAD WORK AREA / TABLE: 5' X 10' (TWO SHUTTLE TABLES) MAX CUTTING CAPACITY: MILD STEEL 3/4", SS 1/2", ALUMINUM 3/8" DUST COLLECTOR

2007 HAAS EC-1600-4X FULL 4TH AXIS HORIZONTAL MACHINING CENTER SPECIFICATIONS PALLET SIZE 64" X 32" X-AXIS TRAVEL 64" Y-AXIS TRAVEL 50" Z-AXIS TRAVEL 32" TOOL MAGAZINE CAPACITY 50 ATC SPINDLE SPEED 7,500 RPM SPINDLE TAPER CAT 40 EQUIPPED WITH: HAAS CNC CONTROL PALLET INDEXING FULL 4TH AXIS CHIP REMOVAL CHIP CONVEYOR PROGRAMMABLE COOLANT COOLANT THROUGH-SPINDLE COOLANT

GENESIS VERSA RC3L ROBOT - MACHINE TYPE: VERSA RC3L RC: ROTATING CENTER TWIN SYSTEM 2 STATION 36 INCH LOAD HEIGHT 84 INCH TOOL LENGTH 40 INCH SWING DIAMETER 1000 LB WEIGHT PER STATION PNEUMATICALLY DRIVEN INDEX WITH 4-5 SECOND SWEEP RJ3IB CONTROLLER WITH 100IB ARC MATE ROBOT DUAL ALFA 8 AUX AXIS PACKAGE ROBOT SOFTWARE OPTIONS: TORCH GUARD TORCH MATE COLLISION GUARD AUTO PAYLOAD COORDINATED MOTION AUTOMATIC TORCH CLEANING STATION SPECIAL FANU SERVO TORCH USED THIS MACHINE FOR ALUMINUM GENESIS DETACH JOG LOAD STATION 60 AMP DISCONNECT ON ELECTRICAL FANUC 10 INCH COLOR QUICK PANEL HMI

42 INCH BULLARD CUTMASTER VERTICAL TURRET LATHE CHUCK DIAMETER: 42 INCHES MAXIMUM SWING: 54 INCHES HEIGHT UNDER RAIL: 37 TO 42 INCHES TABLE SPEEDS: 4.1 TO 150 RPM MAIN MOTOR POWER: 30 HP FEEDS: 0.004 TO 0.500 INCHES PER REVOLUTION MACHINE WEIGHT: APPROXIMATELY 42,500 LBS MACHINE DIMENSIONS: LENGTH: 106 INCHES WIDTH: 96 INCHES HEIGHT: 144 INCHES HEAD CONFIGURATIONS & TRAVELS TURRET HEAD: 5-POSITION TURRET VERTICAL TRAVEL: 30.375 INCHES HORIZONTAL TRAVEL: 26.375 INCHES SWIVEL: 30 DEGREES SIDE HEAD: VERTICAL TRAVEL: 24 TO 37 INCHES HORIZONTAL TRAVEL: 21 INCHES SWIVEL: 30 DEGREES

TRAK K3SX VERTICAL MILLING MACHINE TABLE SIZE: 50 X 10 (WORKING SURFACE) T-SLOTS: 3 X 5/8 X-AXIS TRAVEL (LONGITUDINAL): 32 Y-AXIS TRAVEL (SADDLE CROSS): 16 Z-AXIS TRAVEL (KNEE VERTICAL): 16 RAM TRAVEL: ~15 QUILL TRAVEL: ~5 SPINDLE TAPER: R-8 QUILL DIAMETER: ~3-3/8 (~3.375) SPINDLE SPEEDS: ~60 - 4,200 RPM SPINDLE MOTOR POWER: ~3 HP (~2.2 KW) CNC CONTROL: PROTOTRAK SMX (2-AXIS CNC WITH 3-AXIS DRO/READOUT TYPICAL) HEAD TILT RANGE: ~45 FORWARD/BACK, 90 LEFT/RIGHT MAXIMUM RAPID FEED RATE: ~100 I.P.M. MAX TABLE LOAD: ~750-850 LBS MACHINE WEIGHT: ~2,800-3,000 LBS OVERALL DIMENSIONS: ~71 L X 69 W X 86 H MACHINE POWER: TYPICALLY 220 OR 440 V 3-PHASE CONTROL POWER: TYPICALLY 110 V

SCOTCHMAN 9012-24M IRONWORKER S/N 21950M0520

2023 4' X 8' TORCHMATE 4800 CNC PLASMA - LINCOLN ELECTRIC FLEXCUT 80, 80 AMPS TABLE SIZE: 4 X 8 TOOL CAPACITY: 2 WATER CAPACITY: 107 GALLONS MATERIAL CAPACITY: 0.75 MILD STEEL AIR REQUIREMENTS: 87-109 PSI (6-7.5 BAR) 380 SCFH 180 SLPM LINEAR GUIDANCE: 20 MM PROFILE LINEAR RAIL GEAR ENGAGEMENT: SPRING LOADED GANTRY CARRIAGE: MILLED 38 ALUMINUM TRAVERSE SPEED: 500 IPM MACHINE RESOLUTION: 0.0015 GANTRY CLEARANCE: 5 FRAME CONSTRUCTION: 3/16 MILD STEEL MACHINE WEIGHT: 1,252 LBS UNDER 400 HOURS

HYSTER S125A 12,500 LB CAPACITY LPG FORKLIFT MODEL: S125A ATTACHMENT: FORKS ENGINE TYPE: INTERNAL COMBUSTION LPG/PROPANE 2-SPEED AUTOMATIC TRANSMISSION TURNING RADIUS: APPROX 95-100IN APPROXIMATE WEIGHT: 18,500LBS BACK TILT: 10 DEGREES DRIVE TREAD WIDTH: 44.5IN TIRES: CUSHION MAX LOAD CAPACITY AT 24" 12,500LBS TWO STAGE MAST 6 FORKS MAX FORK LIFT HEIGHT 129 S/N: A024D03749Y

TOYOTA FORK TRUCK S/N 41460

TOYOTA ELECTRIC FORKLIFT, MODEL 8FBE15U, S/N 14617- WORKING

2015 TOYOTA 8FBE15U ELECTRIC FORKLIFT, S/N 14713

2015 TOYOTA 8FBE15U ELECTRIC FORKLIFT, S/N 14647 - WORKING AND CHARGED

2008 AMADA MP1225NJ SHEET HANDLER

HARDINGE HLV-H HIGH PRECISION TOOL ROOM LATHE W/ ACU-RITE DRO. POWER: 1.5HP, 220V, 60 CYCLES, 3 PHASE. SWING OVER BED: 11 INCH. SWING OVER CROSS SLIDE: 6 INCH. DISTANCE BETWEEN CENTERS: 18 INCH. HOLE THROUGH SPINDLE: 1-1/4 INCH. COLLET CAPACITY (5C): 1-1/16 INCH. COMPOUND SLIDE TRAVEL: 3 INCH. SPINDLE SPEED RANGE: 125-3,000RPM. MAIN MOTOR: 1.5HP. THREADING RANGE: 11-108 TPI. APPROXIMATE WEIGHT; 1,800LBS. EQUIPPED WITH ACU-RITE MICRO-LINE DRO.

2017 HYUNDAI WIA KIT 450 SWING OVER BED: 530 MM (20.9) MAXIMUM TURNING DIAMETER: 165 MM (6.5) MAXIMUM TURNING LENGTH: 300 MM (11.8) BAR CAPACITY: 51 MM (2.0) CHUCK SIZE: 6 (OPTIONAL: 8) SPINDLE BORE: 61 MM (2.4) SPINDLE SPEED: UP TO 6,000 RPM SPINDLE MOTOR POWER (MAX/CONTINUOUS): 15/11 KW (20/15 HP) SPINDLE TORQUE (MAX/CONTINUOUS): 95.5/70 NM (70.4/51.6 FT-LB) SPINDLE TYPE: V-RIBBED BELT SPINDLE NOSE: A2-5 AXIS AND TOOLING TRAVEL (X/Z): 450 MM / 300 MM (17.7 / 11.8) RAPID TRAVERSE RATE (X/Z): 30/36 M/MIN (1,181/1,417 IPM) SLIDE TYPE: LM GUIDE NUMBER OF TOOLS: 6 TOOL SIZE (OD/ID): 20 MM (0.8) / 32 MM (1.25) COOLANT AND LUBRICATION COOLANT TANK CAPACITY: 120 LITERS (31.7 GALLONS) LUBRICATING TANK CAPACITY: 1.8 LITERS (0.5 GALLONS) POWER AND DIMENSIONS ELECTRIC POWER SUPPLY: 17 KVA VOLTAGE/FREQUENCY: 220V / 60HZ (OPTIONAL: 200V / 50HZ) FLOOR SPACE (LW): 2,170 1,470 MM (85.4 57.9) HEIGHT: 1,984 MM (78.1) WEIGHT: 2,800 KG (6,173 LBS) CNC CONTROL CONTROLLER: HYUNDAI WIA FANUC I SERIES TOOLHOLDERS INCLUDED, TOOLING NOT INCLUDED

CLINTON POWER RECTIFIER 480 VOLTS 3 PHASE 3000 D C AMPS. 2-12 D C VOLTS WITH MANUAL.

2000 COSEN AH-320H SAW CAPACITY ROUND 320 MM (12.6") CAPACITY SQUARE 320 MM (12.6") CAPACITY RECTANGLE (HXW) 320 X 380 MM (12.6"X15") BLADE SPEED 15-100 M/MIN (49.5-330 FPM) BLADE SIZE (LXWXT) 4240X34X1.1 (167"X1.3"X0.042") BLADE MOTOR 5HP (3.75KW) HYDRAULIC MOTOR 1HP (0.75KW) COOLANT MOTOR 1/8HP (0.1KW) AUTOMATIC INDEXING LENGTH 403 MM (15.9"), MAX. 3627 MM (142.8") WORKBED HEIGHT 790 MM (31") GROSS WEIGHT 1700 KGS (3740 LBS)

PANDJIRIS WELDING POSITIONER S/N 14315X06-7

CADMACH CTX-32 STATION ROTARY TABLET PRESS

1998 MAZAK QUICK TURN 200 CNC LATHE TURNING CENTER, MODEL: QT-200 SN:133837 MAIN CIRCUIT: 3AC V50/60HZ CONTROL CIRCUIT: AC100V, DC24V RATED CAPACITY: 28 KVA C.B. RATING: 50/25KA CHUCK: 8 INCH MAX. SWING: 18.5 INCH MAX. MACHINING DIA. *1: 13.39 INCH STANDARD MACHINING DIA.: 10.16 INCH BAR WORK CAPACITY (ONOY WHEN THROUGH HOLE CHUCK IS USED): 2.01 INCH MAX. MACHINING LENGTH (TRAVEL AMOUNT FROM THE Z-AXIS HOME POINT): 11.81 INCH MAX. SUPPORTED WEIGHT (INCLUDING WEIGHT OF CHUCK): 110 LBS STANDARD CHUCK (), (KITAGAWA): N-08A0615, B-208A615F STANDARD CYLINDER () *2, (KITAGAWA): Y1225R, S-1552-15Y SPINDLE SPEED: 40-4000 RPM HOLE THROUGH SPINDLE DIA.: 2.44 INCH MOTOR OUTPUT (30-MIN. CONTINUOUS RATING) (): 7.5/5.5KW, 11/7.5KW MAX. TORQUE (): 72.3 FT.LBS (LESS THAN 730 MIN-1) / 108.45 FT.LBS (LESS THAN 715 MIN-1) TOOL REST TYPE: OCTAGONAL DRUM TURRET NO. OF TOOLS INSTALLED: 8 TOOL SIZE; SQUARE CUTTER SHANK SECTION: 0.98 INCH BORING BAR SHANK SECTION DIAMETER *3: 1.57 INCH FEED AXES; RAPID TRAVERSE, X/Z-AXIS: 1181/1181 IPM TRAVEL AMOUNT *4, X/Z: 7.28 INCH/12.6 INCH AXIS STROKES, X/Z: 3.75 INCH / 11.40 INCH GENERAL; SIZE *8: CENTER HEIGHT *6: 40.16 INCH OVERALL LENGTH *7: 60.63 INCH DEPTH: 57.48 INCH OVERALL HEIGHT: 68.9 INCH FLOOR SPACE: 24.22 SQFT WEIGHT OF MACHINE (IN MANUAL SPEC SHEET): 5060 LBS MACHINE WEIGHT ON INFORMATION PLATE: 5400 LBS

2017 MULTIVAC C500 DOUBLE CHAMBER VACUUM PACKAGING MACHINE - SEAL BAR LENGTH: 25.98 INCHES, 4 BARS - CHAMBER DIMENSIONS: 2 CHAMBERS, 29.13 INCHES X 25.98 INCHES - ELECTRICAL REQUIREMENTS: 240V, 3P, 60HZ - DIMENSIONS: 62.99 INCHES X 37.4 INCHES X 41.73 INCHES

1965 BLISS PRESS, 110 TON, 8 INCH STROKE

75 TON PRESS STROKE 6 INCH SHUT HEIGHT 13 1/2 INCH ADJ 3 STROKE PER MIN 30/60

1996 MAZAK QUICKTURN 10 CNC LATHE TURNING STATION. MODEL: QT-10 MAIN CIRCUIT: 3AC 200/220V, 50/60HZ CONTROL CIRCUIT: AC100V, DC24V MAIN MOTOR: MAX. 82A, 200V RATED CAPACITY: 22.0 KVA CHUCK: 6 INCH MAX. SWING: 19-1/4 INCH STANDARD/MAX. MACHINING DIA.: 6.3 INCH BAR WORK CAPABILITY: 1.57 INCH DIST. BETWEEN SPINDLE END AND TURRET END FACE: 3.94 INCH - 15.35 INCH MAX. MACHINING LENGTH: 11.22 INCH MAX. SUPPORT WEIGHT: 55.12 LBS (CHUCK WORK), 66.14 LBS (SHAFT WORK) ROTATION SPEED, WITH AND WITHOUT CHUCK: YMC (T PLUS/EIA), 6000 RPM / 5000 RPM BORE: 1.97 INCH MOTOR OUTPUT (30-MIN. RATING): 7.5HP MAX. TORQUE (T PLUS/EIA): 70.9 FT.LBS / 65.1 FT.LBS NO. OF TOOLS: 8D TURRET TOOL SIZE; OD TURNING: 3/4 INCH X 3/4 INCH X 4 INCH ID TURNING: 1.00 INCH INDEXING TIME, ONE POSITION / FULL TURN: 0.58S RAPID FEED RATE, X/Z (T PLUS/EIA): 1200/1300 IPM / 1181/1181 IPM RAPID FEED TIME CONSTANT, X/Z (T PLUS/EIA): 90/90 MSEC / 80/70 MSEC AXIS STROKES, X/Z: 3.75 INCH / 11.40 INCH TAILSTOCK TYPE: MANUAL TAILSTOCK MOVEMENT STROKE: 12.80 INCH TAIL SPINDLE DIA.: 2.17 INCH TAIL SPINDLE HOLE TAPER: M.T. NO. 4 MAX. TAIL SPINDLE THRUST POWER: 331 LBS TAILSTOCK CENTER TYPE: DEAD CENTER TAIL SPINDLE MOVEMENT STROKE: 3.74 INCH OVERALL DIMENSIONS; TOOL SIZE: SPINDLE CENTER HEIGHT: 39.37 INCH OVERALL LENGTH (T PLUS/EIA): 79.02 INCH / 73.62 INCH OVERALL WIDTH: 52.37 INCH OVERALL HEIGHT (T PLUS/EIA): 75.59 INCH / 71.26 INCH FLOOR SPACE REQUIREMENT (T PLUS/EIA): 28.74 SQFT / 26.80 SQFT MACHINE WEIGHT: 5842 LBS S/N: 126146

MILLER DYNASTY 350 S/N LJ140612L

2022 80W TROTEC SPEEDY 360 CO2 LASER LASER POWER: 80 WATT CO2 WORKING AREA: 36.2" X 24" MAX Z-AXIS CLEARANCE: 4.3" POSITIONING SPEED: ~39/S REPEATABILITY: 0.0004 LASER WAVELENGTH: ~10.6 M LASER ONLY- NO EXHAUST OR COMPUTER INCLUDED

CROWN FORKLIFT WITH CHARGER

2005 HAAS VM-3 CNC VERTICAL MACHINING CENTER, VMC, MOLD MAKER. X AXIS TRAVEL: 40" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 25" RAPID RATE X AXIS: 710 IPM RAPID RATE Y AXIS: 710 IPM RAPID RATE Z AXIS: 710 IPM MAX TABLE LOAD: 4,000 LBS SPINDLE MOTOR: 30 HP SPINDLE SPEED: 12,000 RPM SPINDLE TAPER: 40 TOOL CHANGER: 24 ATC MAX CUTTING 500 IPM MAX THRUST 4,100 LBF MAX TOOL DIAMETER 2.5" MAX TOOL DIAMETER 5" MAX TOOL LENGTH 13" MAX TOOL WEIGHT 12 LB EQUIPPED WITH: CHIP AUGER JOG HANDLE HIGH INTENSITY LIGHTING S/N: 44339

1997 MAZAK QUICKTURN 6T CNC LATHE TURNING CENTER, MODEL: QT-6T MAX SWING: 17.32" MAX. MACHINING DIA.: 5.12" BAR WORK HANDLING CAPACITY: 1.26" DISTANCE OF SPINDLE NOSE TO TOOL REST END: 3.15" - 11.02" MAX. MACHINING LENGTH: 7.68" MAX. SUPPORT WEIGHT (INCLUDING WIEGHT OF CHUCK) CHUCK WORK / SHAFT WORK: 44.2 LBS / 55.25 LBS SPINDLE SPEED: 35-7,000 RPM DIA. OF SPINDLE THROUGH HOLE: 1.73" MOTOR OUTPUT (CONTINUOUS RATING / 30-MIN RATING): 4.92 / 7.32HP MAX. TORQUE (CONTINUOUS RATING / 30-MIN RATING): 17.35 / 26.03 FT.LBS NO. OF TOOLS: 8D:8 TOOL SIZE; OUTSIDE TURNING DIA.: 0.79" X 3.94" INSIDE TURNING DIA.: MAX. 0.98" INDEXING TIME (ONE STEP / FULL STEP): 0.20S / 0.54S RAPID TRAVERSE, X/Z: 98.43 / 98.43 FT/MIN TRAVEL AMOUNT, X, Z: 3.15", 7.87" SIZE; CENTER HEIGHT: 38.0" OVERALL LENGTH: 67.32" OVERALL WIDTH: 52.83" OVERALL HEIGHT: 66.54" FLOOR SPACE: 24.76 SQFT WEIGHT OF MACHINE: 3960 LBS WEIGHT ON LABEL: 5720 LBS S/N: 129155

ELLIS MODEL 2000 MITER BAND SAW

1991 AMADA RG-100 100 TON X 10' CNC PRESS BRAKE S/N 104442

MILLER DELTAWELD 350 S/N NA151051U

CROWN S200 SERIES FORKLIFT, MODEL 55F-SSS-A059, S/N 9A212440

1993 MAZAK QUICKTURN 15N CNC LATHE. CAPACITY & TRAVEL: MAX SWING OVER BED: ~17.32 INCH (~440 MM) MAX SWING OVER CROSS SLIDE: ~9.810 INCH (~250 MM) MAX TURNING LENGTH (BETWEEN CENTERS): ~19.720 INCH (~500 MM) X-AXIS TRAVEL: ~7.09 INCH (~180 MM) Z-AXIS TRAVEL: ~20.08 INCH (~510 MM). SPINDLE / POWER: SPINDLE SPEED: UP TO ~4,500 RPM SPINDLE NOSE: A2-6 SPINDLE BORE: ~2.44 INCH (~62 MM) BAR CAPACITY: ~2.02.44 INCH (~5062 MM) SPINDLE MOTOR: ~15-20 HP (~1115 KW). TOOLING & FEATURES: TOOL TURRET: 8-STATION INDEXING TURRET CHUCK SIZE: COMMONLY 8 (VARIES BY OPTION). WEIGHT & FOOTPRINT: APPROX. WEIGHT: ~9,000-9,500 LBS (~4,080-4,300 KG) APPROX. FOOTPRINT: ~92-97 LONG ~58-60 WIDE ~70-75 HIGH. CONTROL: CNC: MAZATROL T-32B.

2000 SOUTHWESTERN INDUSTRIES TRAK LPM VERTICAL MACHINING CENTER CONTROL: PROTOTRAK PMX CONVERSATIONAL CNC (WIRED FOR 4TH AXIS) AXES: 3-AXIS TABLE WORKING SURFACE: ~35.4 X 19.6 (900 X 498 MM) X-AXIS TRAVEL: ~31 (787 MM) Y-AXIS TRAVEL: ~18.5 (470 MM) Z-AXIS TRAVEL: ~21 (533 MM) MAXIMUM TABLE LOAD: ~1,000 LBS (454 KG) SPINDLE TAPER: CAT 40 MAX SPINDLE SPEED: ~8,000 RPM SPINDLE MOTOR: ~15 HP (~11.2 KW) ATC (AUTOMATIC TOOL CHANGER): ~16 TOOL POSITIONS POWER REQUIREMENTS: ~208-240 V, 3 PHASE TYPICAL MACHINE FOOTPRINT (EST.): ~14 FT X 7.5 FT X 9 FT (L X W X H)

1989 MAXSON 57" MSH SHEETER UNICO DUAL MOTOR DRIVE SYSTEM 20-51 SHEET LENGTH 2 SHAFTLESS ROLLSTAND HEAVY DUTY TAPE SYSTEM PEN-MAM DUST COLLECTION SYSTEM SERIES 600 LAYBOY (STACKER) SHUTTLE CART 2 TAG INSERTERS

TAG SHREDDER W/ TURBO CONVEYOR

1997 MAZAK QUICKTURN 20 H-P CNC LATHE TURNING CENTER, MODEL QTN20 / 20HP. CONTROL: MAZATROL T-PLUS CNC CONTROL AND DRO. MAX. SWING: 17.32 INCH. MAX. CUTTING DIA.: 10 INCH. MAX. MACHINING LENGTH: 19.7 TO 20.15 INCH. SPINDLE SPEED: 40-4000 RPM. SPINDLE MOTOR: 15HP CONT., 20/30 MIN. CHUCK: 8 - 10 INCH. BAR CAPACITY: 2 TO 2.75 INCH. TURRET: 8 POSITION. TURNING DIA.: APPX 11.81 INCH. TURNING LENGTH (MAX.): APPX UP TO 19.68 INCH. CHUCK: KITAGAWA B-210A815B 3 JAW, 10 INCH MAX. RPM: 4200. 230V, 3PH, 50/60HZ. LARGEST MOTOR: 139A. POWER REQUIREMENTS: 49.0 KVA. C.B. RATING: 50/25KA. APPX MACHINE DIMENSIONS AS BUILT: 101 INCH L X 63 INCH W X 74 INCH H. APPX MACHINE WEIGHT: 9,000 LBS. S/N: 127A691A

1998 HAAS VF-2 CNC VERTICAL MACHINING CENTER, X AXIS TRAVEL: 30" Y AXIS TRAVEL: 16" Z AXIS TRAVEL: 20" TABLE SIZE: 36" X 14" MAX TABLE LOAD: 3,000 LBS SPINDLE MOTOR: 20 HP SPINDLE SPEED: 7500 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: 20 ATC DIMENSIONS: 103" X 102" X 106" WEIGHT: 8,000 LBS EQUIPPED WITH: CHIP AUGER PROGRAMMABLE COOLANT VISE TOOL CART S/N: 13491

JET GH-166ZX ENGINE LATHE