50 HIGH END CNC MACHINE TOOLS AND MORE

2007 ELUMATEC SBZ 150 5-AXIS CNC 10 METER PROFILE ROUTER, SPECIFICATIONS, X 10000.0 Y 1000.0 Z 630.0 POWER 17.5 RPM 24000.0 # ATC 8.0 SBZ 150 PROFILE MACHINING CENTRE 5-AXIS PROFILE MACHINING CENTRE DESIGNED FOR ECONOMICAL AND EFFICIENT MACHINING OF ALUMINUM AND THIN-WALLED STEEL PROFILES ALL OPERATIONS, SUCH AS ROUTING, DRILLING, TAPPING, THREAD MILLING, NOTCHING AND SAWING, ARE PERFORMED WHILE THE PROFILE BAR IS STATIONARY TO PROTECT THE PROFILE SURFACES 6-SIDED MACHINING. FROM BELOW WITH AN ANGLE HEAD (OPTION) OPERATOR SOFTWARE WITH GRAPHIC 3D DISPLAY OF WORKPIECES THE MAGAZINE CAN BE EQUIPPED WITH NINE STANDARD TOOLS, FIVE SPECIAL TOOLS (ANGLE ROUTING HEAD AND AND SPECIAL CUTTERS) AND ONE SAW BLADE ROBUST, LOW-WEAR DIRECT DRIVES ON ALL AXES ALLOW RAPID HOME POSITIONING OF THE MACHINING ASSEMBLY AUTOMATIC CLAMP RECOGNITION AND CLAMP POSITIONING TWO SEPARATE WORKING ZONES ENABLE MACHINING IN SHUTTLE OPERATION 5-AXIS CONTROLLER FOR 3D MACHINING, 15" COLOR DISPLAY, USB PORTS, AND NETWORK CONNECTION WINDOWS OPERATING SYSTEM ELUCAM MACHINING LENGTHS SBZ 150 10.3 M MAX. MACHINING LENGTH WITH PROFILE END MACHINING, 10,200 MM MAX. MACHINING LENGTH WITHOUT PROFILE END MACHINING, 10,520 MM OPTIONS AVAILABLE ON SBZ 150 MACHINES: SHUTTLE OPERATION FOR WORKING ON TWO SIDES ANGLE ROUTING HEAD FOR MACHINING FROM BELOW AUTOMATIC LENGTH MEASUREMENT CHIPS CONVEYOR BELT BARCODE SCANNER LABEL PRINTER CLOCK SYSTEM TOOL HOLDERS COLLET CHUCK COLLETS SAW BLADES TOOLS ELUCAD (OFFICE SOFTWARE PACKAGE FOR OPTIMIZED PRODUCTION MANAGEMENT)

1998 OKUMA LB35II CNC 2-AXIS TURNING CENTER LATHE S/N: 0589 - SPECIFICATIONS, SWING OVER SADDLE 16.93" DISTANCE BETWEEN CENTERS 36.22" MAX. TURNING DIAMETER 19.29" MAX. WORK LENGTH 33.46" X-AXIS 13.00" Z-AXIS 36.22" SPEED RANGE 14-3200 RPM SPINDLE NOSE JIS A2-8 (JIS-A-1 1) SPINDLE BORE DIAMETER 3.54" NO. OF TOOL STATIONS 12 RAPID TRAVERSE X 591 IPM Z 787 IPM CUTTING FEED 0.0001 - 40.0000 IPR QUILL DIAMETER 4.72" QUILL BORE TAPER MT 5 (BUILT-IN CE NTER) QUILL TRAVEL 6.70" MACHINE DIMENSIONS 110" X 102" X 86. 22" H MACHINE WEIGHT 25,080 LBS MOTOR SPECIFICATIONS SPINDLE (30 MIN/CONT) 40/30 HP FEED DRIVES X 3.2 HP Z 6.4 HP COOLANT PUMP 0.33 HP CONT. ON, EQUIPPED WITH, OSP 7000L CNC CONTROLS 12" 3-JAW CHUCK 12 POSITION TURRET PROGRAMMABLE TAILSTOCK FOOT PEDALS SPLASH GUARDS COOLANT SYSTEM CHIP CONVEYOR DUST COLLECTOR MISC. TOOL HOLDERS

MOLLART LD2 500 TWIN SPINDLE CNC GUN DRILL, SPECIFICATIONS: 1/2" X 20" , DRILLING DEPTH: 19.6", DISTANCE BETWEEN CENTERS: 5.9", NUMBER OF SPINDLES: 2, SPINDLE MAX DIAMETER: 1", SPINDLE MOTORS: 5 HP, SPINDLE SPEEDS: 0 - 12,000 RPM, FEED MOTOR SPEED: 2,000 RPM, EQUIPPED WITH HIGH PRESSURE COOLANT SYSTEM, DIGITAL DEPTH, HYD POWER PACK, T-SLOTTED FIXTURE TABLE. S/N: A444-0700

2007 ACCU-CUT ACCU-BORE 6SM-1AG 6 SPINDLE DIAMOND BORE SIZING MACHINE S/N: BSM-0441. SPECIFICATIONS: MODEL 6SM-IAG (SERIES-2 FOOTPRINT), SHIPPED NOVEMBER-2007, 6-SPINDLE HEAD WITH (3) 7.5 HP MOTORS, AC MOTOR DRIVEN, Z-AXIS FEED WITH ENCODER FEEDBACK, 8-STATION MOTOR DRIVEN DIAL INDEX, POST PROCESS GAGE STATION SLIDE WITH SERVO POSITIONING AND ETAMIC (JENOPTIK) PC BASED GAGE CONTROLLER, AUTOMATION CONSISTING OF AN INFEED AND OUTFEED CONVEYOR, PART ESCAPEMENT AND OVERHEAD PICK-N-PLACE, ALLEN-BRADLEY PLC AND HMI, ALLEN BRADLEY SERVO DRIVE, CONTROL TECHNIQUES AC DRIVES. FINISHED A 3.130 BORE IN A CLUTCH RACE (MADE UP OF A STACK OF LAMINATIONS) IN 6-TOOL PASSES AT 1-PART PER 18-SECOND CYCLE.

MIROKU MEG-800 NC GUN DRILL HOLE DIAMETER : 4 ~ 24 MMTABLE SIZE: 800 X 1000 MMPENETRATION LENGTH: 800 MMSPINDLE?590?5280RPMFANUC CONTROL.

REED B111 TWIN SPINDLE THREAD ROLLER SPECIFICATIONS, WORK DIAMETERS ......... INFEED TO 2", THRU FEED TO 3/4", THREAD LENGTHS ......... INFEED TO 1-7/8", THRU FEED NO LIMIT, PRODUCTION RATES ....... IN FEED 8 - 24 PPM, SPEEDS 50-450 RPM, WEIGHT ................. 3,945 LBS., O.A. DIM ............... 51" X 41" X 47", ACCESORIES:, 7 HP 220/440 VOLT 3 PHASE 1745 RPM 21-20/10 AMP MOTOR, COOLANT PUMP & PIPING, FEED TABLE, ELECTRICS: 5 HP 220/440 VOLT AC MOTOR WITH A/B CONTROLS S/N: 838

92" X 36" X 144" PALLET RACKING (4 UPRIGHTS, 24 SHELF BEAMS).

MISC. QUILLS, DEAD CENTERS, AND LIVE CENTERS FOR TAILSTOCKS.

LOC-LINE FITTINGS 1/4" AND 1/2" SIZES.

5 DRAWER TOOL CABINET W/ 36" X 24" X 36" STORAGE CABINET

VARIOUS CHUCK JAW SETS; 3 JAW SETS W/INSERTS; 6" VISE JAW FACE PLATES.

MISC. COLLET TOOL HOLDERS.

5C COLLET HORIZONTAL/VERTICAL INDEXERS (4 PCS).

GOODWAY 420525010-45 LIVE TOOL HOLDER S/N: K15-01522-2.22

MT MAT.MTC5592-1.1 ASS.BMT55ER25 REF LIVE TOOL COLLET HOLDER.

WTO TYP 414516001-45 LIVE TOOL HOLDER S/N: K16-01129-1.2

5C STEP COLLETS.

5C COLLETS.

MIYANO 2K70001 AXIAL LIVE TOOLS

NACHI WD5135 T32042B01 LIVE TOOL HOLDER.

MIYANO 2K70001 AXIAL LIVE TOOLS (4 PCS).

MT 618-1 RAD.BGL.MAGG.ER32 LIVE TOOL COLLET HOLDER.

ACME GRIDLEY RB-6 COLLETS AND TOOLING

SWISTEK TSUGAMI MDL5SS562000 2 SPINDLE DRILLING/MILLING UNITS (2).

MIYANO 2K70001 AXIAL LIVE TOOLS (3 PCS)

MIYANO 2K703000 RADIAL LIVE TOOLS (3 PCS)

MIYANO 2K703000 RADIAL LIVE TOOLS (3 PCS)

MIYANO 2K70001 AXIAL LIVE TOOLS (5 PCS).

MIYANO 2K703000 RADIAL LIVE TOOLS (3)

SWISTEK TSUGAMI SLOTTING/CROSS DRILLING/MILLING LIVE TOOL HOLDERS (3 PCS).

MIYANO 2K70001 AXIAL LIVE TOOLS (3 PCS)

SWISTEK TORNOS GAMMA 20 CROSS DRILLING/MILLING UNITS TSS601000; TSS161000.

MIYANO 2K703000 RADIAL LIVE TOOLS (3 PCS)

MSO DAVENPORT 5-SPINDLE MULTIPLE SECONDAY OPERATION ROTARY TRANSFER MACHINE, S/N 9531538 - SPECIFICATIONS, GENEVA TYPE INDEX TABLE, DIAMETER 17-5/8", POSITIONS 5, MAXIMUM COLLET CAPACITY 1", COLLET HOLDERS, TABLE DRIVE MOTOR 3/60/208-220/440 1/2 HP, POWER UNITS, THREE (3) VERTICAL HEAD-(3) 3/4 HP 3/60/208-220/440 VOLTS, 2 HORIZONTAL DRILL/TAP 3/4 HP HEADS, STROKE 0 TO 3", RAPID APPROACH RATE 200 IPM, FEED RATE FORWARD OR BACK 0 TO 150 IPM, THRUST 465 LBS., SPINDLE SPEEDS (5) 700, 1300, 1725,, 2300, 4300 RPM, EQUIPPED WITH, COMPLETE ELECTRICAL CONTROLS, COOLANT SYSTEM, FIVE (5) 10-305 1 " CAPACITY COLLET CHUCKS, TAP HEAD AND DRILL CHUCKS

ACME GRIDLEY RA6 AUTOMATIC SCREW MACHINE, S/N: C18799 - SPECIFICATIONS MAXIMUM COLLET CAPACITY ROUND 7/16" SQUARE 5/16" HEXAGON 3/8" MAXIMUM LENGTH-STANDARD STOCK FEED 3 1/2" TURNING 2 5/8" RANGE OF SPINDLE SPEEDS MAXIMUM 3556 RPM MINIMUM 770 RPM APPROXIMATE WEIGHT 4,200 LBS. MOTOR SPECIFICATIONS 7 1/2 HP 3/60/230/460 MAIN DRIVE MOTOR & CONTROLS 3/4 HP 3/60/230/460 COOLANT PUMP MOTOR 1/4 HP 3/60/230/460 CHIP CONVEYOR MOTOR EQUIPPED WITH INDEPENDENTLY OPERATED CROSS SLIDES RECESSING ATTACHMENT UNIVERSAL TYPE CHIP CONVEYOR INDIVIDUALLY MOTORIZED OUTSIDE COOLANT PUMP & PIPING DOUBLE DECK FORM TOOL HOLDER WITH FLAT FORM TOOL HOLDER 1ST POSITION DOUBLE DECK TOOL HOLDER WITH CUTOFF BLADE - 6TH POSITION HINGED TYPE END SLIDE TOOL HOLDERS

1972 ACME GRIDLEY RA-6 6-SPINDLE AUTOMATIC BAR (SCREW) MACHINE S/N: 71995-B - SPECIFICATIONS, 1-1/4 ACME GRIDLEY (RA-6) 6 SPINDLE AUTOMATIC BAR (SCREW) MACHINE, MAXIMUM COLLET CAPACITY, ROUND 1-1/4", SQUARE 7/8", HEXAGON 1-3/32", MAXIMUM LENGTH-STANDARD, STOCK FEED 7", TURNING 6", RANGE OF SPINDLE SPEEDS, MAXIMUM 2,370 RPM, MINIMUM 302 RPM, APPROXIMATE WEIGHT 14,000 LBS., EQUIPPED WITH, (5) INDEPENDENTLY OPERATED CROSS SLIDES, ELECTRIC TRIP UNIVERSAL THREADING ATTACHMENT - 4TH POSITION, RECESSING ATTACHMENT 3RD POSITION, AIR STOCK STOP, SOUND ENCLOSURE3, INDIVIDUALLY MOTORIZED OUT COOLANT PUMP & PIPING, INDIVIDUALLY MOTORIZED UNIVERSAL CHIP CONVEYOR, HINGED TYPE END SLIDE TOOL HOLDERS, ONE SET OF CAMS, GEARS, COLLETS & PUSHERS, PLEXIGLASS SPLASH GUARDS, STOCK REEL AND STAND, MISC. CROSS SLIDE TOOL HOLDERS

2004 IEMCA MASTER 880/MP-3 MAGAZINE TYPE BAR FEEDER S/N: 020407SA04SPECIFICATIONS, IEMCA MASTER 880MP/E MAGAZINE BAR LOADER NEW: 2004 SPECIFICATIONS: BAR DIAMETER CAPACITY: 5/16" - 3 1/8"BAR LENGTH: 10 FT. BAR CHANGE TIME: 35 SECONDS (FOR 12 BAR) 2-LAYER RACK: 47 LINEAR INCH CAPACITY 3-LAYER RACK: 71 LINEAR INCH CAPACITY FEED SPEED: 5.9" / SECOND RETURN SPEED: 37.4" / SECOND OPERATING VOLTAGE: 230 / 400 VOLT TOTAL POWER REQUIRED: 4 KW COMPRESSED AIR: 6 BAR ELECTRIC CABINET: 14 KG DIMENSIONS (L X W): 189" X 46"WEIGHT (APPROX.): 4000 LBS.

CAT 40 TOOL HOLDERS (10 PCS).

CAT 40 TOOL HOLDERS (10 PCS).

2013 YUKIWA JNC 170L CNC ROTARY TABLE COMPATIBLE W/BROTHER CNC DRILL S/N: 12863 - SPECIFICATIONS, JNC SERIES, LIGHT WEIGHT COMPACT, SUITABLE FOR SMALL-SIZED MACHINING CENTERS, ACCURATE INDEXING, ACCURATE INDEXING IS AVAILABLE BY DURABLE WORM WHEEL OF SPECIAL ALLOY., OUTSTANDING WATER PROTECTION, AUTO-AIR PURGING SYSTEM (PAT.) IS BUILT IN AS STANDARD AND EFFECTS AGAINST COOLANT OUTSTANDINGLY., ? EASY JIG DESIGNING? ? EASY MAINTENANCE, UNIT:MM, MODEL RIGHT HANDED JNC140R JNC170R JNC200R JNC250R, LEFT HANDED JNC140L JNC170L JNC200L JNC250L, TABLE DIAMETER 140 170 200 250, CENTER HEIGHT 110 135 160 200, TABLE FAUCET DIAMETER 40H7, DEPTH 10 60H7, DEPTH 10 70H7, DEPTH 10 90H7, DEPTH 10, TABLE CENTER THROUGH HOLE DIAMETER 28 45 56 72, CLAMP SYSTEM AIR PRESSURE (0.5 ? 0.7MPA), CLAMP TORQUE (N??) 120 (0.5MPA) 230 (0.5MPA) 450 (0.5MPA) 650 (0.5MPA), INDEXING ACCURACY (CUMULATIVE) WITHIN, 40 SECONDS WITHIN, 30 SECONDS, ALLOWABLE OPERATION LOAD (N) VERTICAL LOAD 4,000 5,000 7,000 8,000, HORIZONTAL LOAD 2,000 3,000 4,000 5,000, CIRCUMFERENTIAL LOAD 2,000 1,700 2,600 3,500, ALLOWABLE INERTIA MOMENT (KG?M2) DURING VERTICAL USE 0.25 0.5 1.0 2.0, DURING HORIZONTAL USE 0.125 0.25 0.5 1.0, TOTAL REDUCTION RATIO 1/72 1/90 1/90 1/90, MAXIMUM ROTATION (MIN-1 ) 41.6 33.3 33.3 33.3, GUIDE PIECE WIDTH 14H7 14H7 18H7 18H7, WEIGHT (KG) 27 38 58 86, * GUIDE PIECE (2PCS), FIXTURES (2SETS), AIR TUBE (5M) FOR TABLE CLAMPING ARE ATTACHED., * CORRESPONDING TO CONTROLLER FOR CNC ROTARY TABLE OR TO MOTOR FOR ADDITIONAL AXIS., EQUIPPED WITH, ELECTRONIC SERVO DRIVE, 3-JAW CHUCK WITH ACCUATOR, TAILSTOCK

2008 REED A-22 3-DIE VERTICAL DIE ROLLING MACHINE, SPECIFICATIONS, CAPACITY - WORK DIAMETER, INFEED - STANDARD EQUIPMENT 1/4" TO 2-5/8", INFEED - SPECIAL EQUIPMENT 5/32" TO 2-5/8", THRU-FEED - SPECIAL EQUIPMENT 1/4" TO 5/8", THREAD LENGTHS, INFEED - STANDARD EQUIPMENT UP TO 1-1/2", INFEED - SPECIAL EQUIPMENT, MAX. 2-3/4", THRU-FEED - SPECIAL EQUIPMENT UP TO 11", DIE SPEEDS, STANDARD 108, 208, 308, 410, 515, 575 & 720 RPM, CAM SPEEDS, APPROXIMATE PIECES PER MINUTE, STANDARD 6, 11, 16, 21 & 26, APPROXIMATE NET WEIGHT 3,200 LBS., MOTOR SPECIFICATIONS, 10 HP 3/60/220/440 MAIN DRIVE MOTOR & CONTROLS, 3/4 HP 3/60/220/440 CAM DRIVE MOTOR, EQUIPPED WITH, ONE (1) SET OF DIE HOLDERS DOUBLE SUPPORT 9016-13, COMPLETE FACTORY REBUILD 11/2007

2012 OTC DAIHEN ALMEGA ARC 3-120 ROBOTIC WELDING CELL S/N: 1M0453YZ520, SPECIFICATIONS, ALMEGA AII-V6, THE AII-V6 IS OTC DAIHEN'S NEWEST STANDARD ARC WELDING ROBOT. THE AII-V6, LIKE ITS PREDECESSOR AX-V6, SUPPORTS MOST WELDING APPLICATIONS AND IS ONE OF OUR MOST POPULAR PRODUCTS, VERSATILE - GMAW, TIG, AND PLASMA CUT, FASTER SPEED - 40% FASTER THAN AX MODELS, DEDICATED DESIGN - BEST FIT WITH DAIHEN WELDING MACHINES, 6KG PAYLOAD, TECHNICAL DATA: AII-V6, MAX. PAYLOAD: 6 KG, DEGREE OF FREEDOM: 6 AXES, REACH: 1,402 MM, REPETITIVE ACCURACY: 0.08 MM, WEIGHT: 160 KG, EQUIPPED WITH, AII-V6 ROBOT & AX-21 CONTROL UNIT, (2) 600MM X 800MM TABLES WITH 909 KG (2,000 LBS.) PAYLOAD CAPACITY, ARC SHIELD CURTAIN, TEACH CONTROL PENDANT, OTC WELDER POWER SUPPLY

AIDA NC2-250(2) 275 TON DOUBLE CRANK GAP PRESS S/N: 10525-1395. 11.81" STROKE. 3.15" POWER RAM ADJUSTMENT. 20.86" SHUT HEIGHT OVER THE BOLSTER. 20-35 SPM. 82.68" X 27.56" RAM. 106.30" X 36.22" BED. EQUIPPED WITH AIR CLUTCH AND BRAKE AIR COUNTERBALANCES. HYDRAULIC OVERLOADS. PALM BUTTONS. TRANSFER SYSTEM. CUSHIONS.

THERMWOOD C-40 3-AXIS CNC ROUTER W/EXTENDED Z-AXIS, S/N C401880899 - SPECIFICATIONS, MOVING TABLE STYLE, TABLE SIZE 60" X 120", TRAVELS, X 126", Y 73", Z 10.5", FEED RATES, X 2100 IPM, Y 1200 IPM, Z 1200 IPM, SPINDLE TYPE HSD BT30, ROUTER (1) 10.5 HP, ROUTER (2) 5 HP PIGGY BACK, ROUTER SPEED 3000-24,000 RPM, OVERALL DIMENSIONS 95"X140"X 85"H, WEIGHT (APPROX.) 9,000 LBS., EQUIPPED WITH, THERMWOOD MODEL 91,000 SUPER CONTROL, RUNNING OS2 VERSION 4.5, 10 HP VARIABLE SPEED THERMWOOD SPINDLE, 3000-24,000 RPM, 5 HP THERMWOOD PIGGY BACK SPINDLE 2, AUTOMATIC TOOL LENGTH SENSOR, EG&G ROTRON 15HP REGENERATIVE BLOWER VACUUM PUMP, 50 POSITION AUTOMATIC TOOL CHANGER

2007 TOYODA SELECT G100-II 12"X39" CNC ANGLEHEAD CYLINDRICAL GRINDER S/N: RF2116 - SPECIFICATIONS, 12" X 39" TOYODA SELECT G100-II CNC CYLINDRICAL GRINDER MODEL .................................. SELECT G100-II YEAR ................................... 2007 SWING .................................. 12.6" DISTANCE BETWEEN CENTERS ............... 39.4" MAX GRINDING DIAMETER .................. 11.8" MAX LOAD BETWEEN CENTERS ............... 330 LBS CENTERLINE HEIGHT FROM FLOOR ........... 42.5" WHEELHEAD: WHEEL SIZE (OD X ID) ................... 20" X 8" WHEEL USE RANGE (30 CONFIGURATION ..... 20" TO 14.96" MAX WHEEL WIDTH ........................ 3.9" WHEEL SURFACE SPEED .................... 8,500 SFPM SPINDLE................................. TOYODA STAT BEARING MIN MOVE INCREMENT ..................... .000010" WHEELHEAD RAPID FEED ................... 394 IPM TABLE: TYPE ................................... 2-PIECE SWIVELING/TRAVERSING TABLE SWIVEL (CCW TO CW) ............... 10 TO 0 WORKHEAD: TYPE ................................... DEAD SPINDLE WORKHEAD CENTER TAPER .................. MT #4 WORK SPEED (VARIABLE) .................. 16 TO 500 RPM FOOTSTOCK: TYPE .................................... MANUAL FOOTSTOCK CENTER ........................ MT #4 MAX CENTER RETRACTION ................... .98" MOTORS: WHEEL DRIVE MOTOR ...................... 10 HP, EQUIPPED WITH, EQUIPPED WITH LATERAL (SHOULDER) GAUGES, TABLE MOUNTED IN-PROCESS SIZING GAUGES, SINGLE POINT WORK HEAD MOUNTED DRESSERS AND COOLANT SYSTEM WITH MAGNETIC SEPARATORS TOYODA GC50 CONVERSATIONAL CONTROLS, GRAPHICAL USER INTERFACE, TOUCHSCREEN, 64 PROGRAM, (1) JIB CRANE

2016 DMS FMT PATRIOT 4X8 4'X8' 3-AXIS CNC ROUTER, NEW - SPECIFICATIONS, MODEL PATRIOT 4X8, WORKTABLE, X & Y 4' X 8', PANEL PASSAGE 6", Z AXIS STROKE 12", NUMBER OF VACUUM ZONES 4, TYPE OF WORK TABLE PHENOLIC, ROUTER HEAD, ROUTER SPINDLE HSD 5 HP ER32 COLLET SPINDLE, ROUTER SPINDLE SPEEDS 1,500-18,000 RPM, ROUTER COOLING SYSTEM AIR COOLED, MEASURING DEVICE FOR TOOL LENGTH YES, DUST HOOD PNEUMATIC (2 POSITIONS), SOFTWARE/CONTROL, PC CONSOLE FAGOR, WINDOWS PC

2004 THERMWOOD C40 3-AXIS CNC ROUTER, S/N: CS400430904 SPECIFICATIONS, TABLE-W 48.0 TABLE-L 96.0 POWER 10.0 RPM 18000.0 TAPER 30 # AXIS 3.0 MOVING TABLE STYLE TABLE SIZE 48" X 96" TRAVELS X 100" Y 61" Z 7.8" FEED RATES X 2100 IPM Y 1200 IPM Z 1200 IPM SPINDLE TYPE HSD MODEL 919 BT30 ROUTER 10.5 HP ROUTER SPEED 5000-18,000 RPM OVERALL DIMENSIONS 90"X120"X 85"H WEIGHT (APPROX.) 7,000 LBS., EQUIPPED WITH, QCORE CNC SUPER CONTROLLER THN OS SOFTWARE VERSION #9.0 4' X 8' TABLE 5 POSITION AT THE HEAD TOOL CHANGER 4 POSITION BAR TYPE TOOL CHANGER AUTOMATIC TOOL LENGTH MEASURING DEVICE MANUAL POP UP PINS 10 HP HSD SPINDLE MODEL 919 18 HP BECKER VACUUM PUMP

2009 WEEKE OPTIMAT BHC VENTURE 1M CNC POD & RAIL ROUTER, 3250MM X 1250 TABLE, SPECIFICATIONS, X-3860MM, Y-1822MM (TABLE 3250MM X 1250MM), Z1-250MM, Z2-185MM, SPEEDS - X/Y 110M/MIN, Z-20M/MIN, PC CNC CONTROL, (6) TOOL CHANGER, BECKER PICCHIO 2200 VACUUM PUMP S/N 0-250-66-5519, WORKING DIMENSION X 3.250 MM, WORKING DIMENSION Y 1.250 MM, WORKING DIMENSION Z 125 MM, MAIN MOTOR POWER 9 KW, TOOL CHANGE SLOTS 6, VERTICAL DRILLING SPINDLES 19, MACHINE TABLE POD AND RAIL TABLE, POSITIONING AID, CONTROL HOMAG POWER CONTROL PC 85, SOFTWARE HOMAG WOODWOP 5.0, TOOL CHANGING AUXILIARY DEVICE, HANDHELD TERMINAL, WORKPIECE SUPPORT AIDS, DISC TOOL CHANGER, AUTOMATIC CENTRAL LUBRICATION, ENCLOSED DRAG CHAIN, UPS - UNINTERRUPTIBLE POWER SUPPLY, INDEPENDENT Z-AXES 2, NUMBER OF MILLING SPINDLES 1, TORQUE SUPPORT, TOOL CLAMPING SYSTEM HSK-F63, HORIZONTAL DRILLING SPINDLES IN X 4, HORIZONTAL DRILLING SPINDLES IN Y 2, GROOVE SAW 90 TURNABLE, CANTILEVER MACHINE, NUMBER OF CONSOLES 6, VACUUM PUMP, CAPACITY VACUUM PUMP 100 M3/H, SAFETY DEVICE SAFETY MAT, CE MARKING, TOTAL CONNECTION 18 KW, WEIGHT 4.200 KG, SPACE REQUIRED, LENGTH 5.830 MM, WIDTH 4.080 MM, HEIGHT 2.350 MM

QUINTAX Q3M 3-AXIS DUAL 5X5 TABLES CNC ROUTER, - SPECIFICATIONS, TABLE SIZE: DUAL 5? X 5? TABLES, Z AXIS: 24?, TOOL CHANGER: 8 POSITION ATC, SPINDLE: 12HP COLUMBO, SPINDLE SPEED: 18,000 RPM, CONTROLLER: FAGOR, EQUIPPED WITH, DUAL 5'X5' TABLES, CAN BE RUN INDIVIDUALLY OR TOGETHER AS 5'X10', TOOL CHANGER, 18K RPM COLUMBO SPINDLE, 24" Z-AXIS, (2) PDS RIGHT ANGLE ADJUSTABLE HEADS, (NO PUMP, WAS ON CENTRALIZED UNIT)

2013 SCM ACCORD FX-M 12'X54" 3-AXIS CNC ROUTER S/N: AA2/002685 - SPECIFICATIONS, MACHINING CENTER EQUIPPED WITH THE HIGH-PERFORMANCE SCM MULTIFUNCTION WORKTABLE IN ALUMINUM, FOR PRODUCTION OF HIGH FLEXIBILITY AND REGARDLESS OF FORM, WHICH REQUIRE HIGH STANDARDS OF ACCURACY. OPTIMAL SOLUTIONS TO MEET THE SPECIFIC NEEDS OF A FLEXIBLE PRODUCTION WITH NESTING TECHNOLOGY AND SUITABLE TO PROCESS PANELS OF DIFFERENT MATERIALS: LAMELLAR WOOD, PLYWOOD, CHIPBOARD, MDF, ETC., ADVANTAGES, MAXIMUM PRECISION ON THE ENTIRE MACHINING AREA THANKS TO THE RIGID MOBILE GANTRY., REDUCTION OF DOWNTIMES WITH TOOL CHANGE ON BOARD ALLOWING THE REPLACEMENT OF THE TOOL IN MASKED TIME., HIGHER PRODUCTIVITY WITH THE OPTION FOR PENDULUM MACHINING WITH NO SIZE LIMITS IN TOTAL ERGONOMICS., MAXIMUM FREEDOM OF MOVEMENT IN TOTAL SAFETY WITH NO CARPETS ON THE FLOOR WITH THE NEW SYSTEMS PRO SPEED AND PRO SPACE, SAVNERGY, HIGH PERFORMANCE AND ENERGY SAVING., TECHNICAL DATA, X-AXIS WORKING AREA MM FROM 3650, Y-AXIS WORKING AREA MM FROM 1320, COMPONENT PASSAGE MM 250, ELECTRO SPINDLE POWER KW FROM 8,5 TO 13, TOOL-CHANGER NR. POSITIONS FROM 16, CNC MACHINING CENTER, AXES, X-Y AXES SPEED M/MIN 90, WORKPIECE PASSAGE MM 250, ELECTRO-SPINDLE, 3- AND 4-AXIS ELECTRO-SPINDLES POWER KW 8,5 - 12 - 13, MAX. ROTATION RPM 24.000, SOFTWARE VERSION : XILOG PLUS, HAND HELD CONTROLLER, 2 ZONE VACUUM TABLE, VACUUM PUMP, SUCTION OPENING DIAMETER MM 1 X 100 - 1 X 250, SUCTION AIR SPEED M/SEC 25, SUCTION AIR CONSUMPTION M3/HR 1300 / 4400, COMPRESSED AIR CONSUMPTION NL/MIN 170 - 300, MACHINE WEIGHT KG 6200