PLANT CLOSURE CYCLOHEXANONE Production Facility Day 3
Category: MISC
Total Lots:
143
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
AIR COMPRESSOR OF 4 STEPS OF 1 TURBINE MOVED BY STEAM OF HIGH PRESSURE OF 32 KG/CM2 RAISES PRESSURE UP TO 10.5 KG/CM2, HAS 3 INTERCOOLERS, HAS FILTER FOR PARTICLES SUSPENDED IN THE AIR (S-531) IN DISCHARGE; HAS SEPARATOR TO ELIMINATE HUMIDITY OF THE AIR (S-527), PLUS LUBRICATION SYSTEM WITH TWO PUMPS, CAPACITY OF 9387KG/CM2, CONTROL BOARD, FILTERS.
|
🔒 Subscribe | |||
|
|
CARBON STEEL COLUMN EQUIPPED WITH 21 CARBON STEEL SIEV TYPE PLATES AND MEDIUM HEATING REBOILER FOR MEDIUM PRESSURE STEAM; 1.829 METERS INSIDE DIAMETER X 13.66 METERS HIGH; DOME OPERATING PRESSURE 1.6 KG/CM2; OPERATING TEMPERATURE 110 C; BOTTOM TEMPERATURE 118 C. / COLUMNA EN ACERO AL CARBON EQUIPADA CON 21 PLATOS TIPO SIEV DE ACERO AL CARBON Y REHERVIDOR MEDIO DE CALENTAMIENTO PARA VAPOR DE MEDIA PRESION; 1.829 METROS DIAMETRO INTERIOR X 13.66 METROS DE ALTURA; PRESION DE OPERACION DOMO 1.6 KG/CM2; TEMPERATURA DE OPERACION DE 110 C; EN EL FONDO TEMPERATURA DE 118 C.
|
🔒 Subscribe | |||
|
|
CARBON STEEL COLUMN EQUIPPED WITH 21 CARBON STEEL SIEV TYPE PLATES AND MEDIUM HEATING REBOILER FOR MEDIUM PRESSURE STEAM; 1.676 METERS OF INTERNAL DIAMETER X 14.4 METERS HIGH; PRESSURE IN DOME 3.5 KG/CM2; AT THE BOTTOM IT WORKS AT 140 C, IT HAS PRESSURE CONTROL (PIC-5E343) AND LEVEL CONTROL (LIC-5E302).
|
🔒 Subscribe | |||
|
|
DRYING COLUMN IN CARBON STEEL EQUIPPED WITH 15 SIEV TYPE CARBON STEEL PLATES AND MEDIUM HEATING REBOILER FOR MEDIUM PRESSURE STEAM; COLUMN OPERATING PRESSURE 1KG/CM2 ; 1.37M INNER DIAMETER X 11.57 M HEIGHT. / COLUMNA SECADORA EN ACERO AL CARBON EQUIPADA CON 15 PLATOS TIPO SIEV EN ACERO AL CARBON Y REHERVIDOR MEDIO DE CALENTAMIENTO PARA VAPOR DE MEDIA PRESION; PRESION DE OPERACION DE LA COLUMNA 1KG/CM2 ; 1.37M DIAMETRO INTERIOR X 11.57 M DE ALTURA.
|
🔒 Subscribe | |||
|
|
TWO-SECTION CARBON STEEL COLUMN: UPPER SECTION EQUIPPED WITH 18 CARBON STEEL SIEV TYPE PLATES; LOWER SECTION EQUIPPED WITH 5 CARBON STEEL SIEV TYPE PLATES AND 2 MEDIUM HEATING REBOILERS FOR MEDIUM PRESSURE STEAM OF 4.5 KG/CM2; DOME PRESSURE OF 1 PSI; TEMPERATURE OF 78 C; FIRST SECTION 0.91 METERS INTERNAL DIAMETER X 6.55 METERS LENGTH; SECOND SECTION 2.28 METERS INTERNAL DIAMETER X 19 METERS HEIGHT. / COLUMNA DE DOS SECCIONES EN ACERO AL CARBON: SUPERIOR EQUIPADA CON 18 PLATO TIPO SIEV DE ACERO AL CARBON; INFERIOR EQUIPADA CON 5 PLATOS TIPO SIEV DE ACERO AL CARBON Y 2 REHERVIDOR MEDIO DE CALENTAMIENTO PARA VAPOR DE MEDIA PRESION DE 4.5 KG/CM2; PRESION EN DOMO DE 1 PSI; TEMPERATURA DE 78 C; PRIMERA SECCION 0.91 METROS DE DIAMETRO INTERNO X 6.55 METROS DE LONGITUD; SEGUNDA SECCION 2.28 METROS DE DIAMETRO INTERNO X 19 METROS DE ALTURA.
|
🔒 Subscribe | |||
|
|
EXTRACTOR COLUMN IN CARBON STEEL PACKED WITH 900' OF 1/12" PALL RINGS, MEASURES: 2.0 M INTERNAL DIA - EXTRACTOR COLUMN IN CARBON STEEL PACKED WITH 900' OF 1/12" PALL RINGS, MEASURES: 2.0 M INTERNAL DIAMETER X 8 M HEIGHT. / COLUMNA EXTRACTORA EN ACERO AL CARBON EMPACADA CON 900' DE ANILLOS PALL DE 1/12", MEDIDAS: 2.0 M DE DIAMETRO INTERNO X 8 M DE ALTURA.
|
🔒 Subscribe | |||
|
|
14742320-100 |
COMPRESSOR FOR ORGANIC GASES RECIPROCATING TYPE, DRIVEN BY 50 HP ELECTRIC MOTOR AT 1785 RPM MODEL 14742320-100, CAPACITY 444 KG/H, DISCHARGE PRESSURE 10.5 ATM, DISCHARGE TEMPERATURE 50C; INCLUDES SEPARATOR WITH LEVEL TRANSMITTER, 4 INTERCOOLERS, DOES NOT INCLUDE VALVE TRAIN. / COMPRESOR PARA GASES ORGANICOS TIPO RECIPROCANTES, MOVIDO POR MOTOR ELECTRICO DE 50 HP A 1785 RPM MODELO 14742320-100, CAPACIDAD 444 KG/H, PRESION DE DESCARGA DE 10.5 ATM, TEMPERATURA DE DESCARGA 50C; INCLUYE SEPARADOR CON TRANSMISOR DE NIVEL, 4 INTERENFRIADORES, NO INCLUYE TREN DE VALVULAS.
|
🔒 Subscribe | ||
|
|
CARBON STEEL CONDENSER; AREA 122M2, SHELL DIAMETER 39", NO. OF TUBES 432, TUBE DIAMETER 1", TUBE LENGTH 12', TUBE PITCHES 4. / CONDENSADOR EN ACERO AL CARBON; AREA 122M2, DIAMETRO DE CORAZA 39", NO. DE TUBOS 432, DIAMETRO DE TUBOS 1", LONGITUD DE TUBOS 12', PASOS POR TUBOS 4.
|
🔒 Subscribe | |||
|
|
CARBON STEEL CONDENSER; AREA 54.8M2, SHELL DIAMETER 28", NO. OF TUBES 282, TUBE DIAMETER 1", TUBE LENGTH 8', TUBE PITCHES 2. / CONDENSADOR EN ACERO AL CARBON; AREA 54.8M2, DIAMETRO DE CORAZA 28", NO. DE TUBOS 282, DIAMETRO DE TUBOS 1", LONGITUD DE TUBOS 8', PASOS POR TUBOS 2.
|
🔒 Subscribe | |||
|
|
CARBON STEEL CONDENSER; AREA 322M2, SHELL DIAMETER 66", NO. OF TUBES 552, TUBE DIAMETER 1", TUBE LENGTH 12', TUBE PITCHES 4. / CONDENSADOR EN ACERO AL CARBON; AREA 322M2, DIAMETRO DE CORAZA 66", NO. DE TUBOS 552, DIAMETRO DE TUBOS 1", LONGITUD DE TUBOS 12', PASOS POR TUBOS 4.
|
🔒 Subscribe | |||
|
|
VERTICAL TYPE REACTOR IN CARBON STEEL OF 2.5 METERS OF INTERNAL DIAMETER X 3.75 METERS OF HEIGHT; IT CONSISTS OF A CALANDRIA OF 1310 TUBES, WITH A LENGTH OF 4877 MM; INTERNAL DIAMETER OF 45.3 MM. / REACTOR TIPO VERTICAL EN ACERO AL CARBON DE 2.5 METROS DE DIAMETRO INTERNO X 3.75 METROS DE ALTURA; CONSTA DE UNA CALANDRIA DE 1310 TUBOS, CON UNA LONGITUD DE 4877 MM; DIAMETRO INTERNO DE 45.3 MM.
|
🔒 Subscribe | |||
|
|
1971 |
1971 HEAT EXCHANGER; DESIGN PRESSURE 1.28 GK/CM2, WORKING TEMPERATURE 260C, AREA 188 M2; SHELL DIAMETER 31, NO. OF TUBES 330, TUBE DIAMETER 1, TUBE LENGTH 12', TUBE PITCHES 4. / INTERCAMBIADOR DE CALOR; PRESION DE DISENO 1.28 KG/CM2, TEMPERATURA DE TRABAJO 260C, ANO 1971, AREA 188 M2; DIAMETRO DE CORAZA 31", NO. DE TUBOS 330, DIAMETRO DE TUBOS 1", LONGITUD DE TUBOS 12', PASOS POR TUBOS 4.
|
🔒 Subscribe | ||
|
|
CARBON STEEL CONDENSER; AREA 58M2, SHELL DIAMETER 27", NO. OF TUBES 246, TUBE DIAMETER 1", TUBE LENGTH 10', TUBE PITCH 1. / CONDENSADOR EN ACERO AL CARBON; AREA 58M2, DIAMETRO DE CORAZA 27", NO. DE TUBOS 246, DIAMETRO DE TUBOS 1", LONGITUD DE TUBOS 10', PASOS POR TUBOS 1.
|
🔒 Subscribe | |||
|
|
1971 |
1971 CARBON STEEL OIL GAS SEPARATOR; DESIGN PRESSURE 3.65 KG/CM2; DESIGN TEMPERATURE 65 C, CAPACITY .935 M3, ASME CERTIFIED; 1 CARBON STEEL HEAT EXCHANGER.
|
🔒 Subscribe | ||
|
|
1971 |
1971 HEAT EXCHANGER; DESIGN PRESSURE 1.28 GK/CM2, WORKING TEMPERATURE 260C, AREA 188 M2; SHELL DIAMETER 31, NO. OF TUBES 330, TUBE DIAMETER 1, TUBE LENGTH 12', TUBE PITCHES 4. / INTERCAMBIADOR DE CALOR; PRESION DE DISENO 1.28 KG/CM2, TEMPERATURA DE TRABAJO 260C, ANO 1971, AREA 188 M2; DIAMETRO DE CORAZA 31", NO. DE TUBOS 330, DIAMETRO DE TUBOS 1", LONGITUD DE TUBOS 12', PASOS POR TUBOS 4.
|
🔒 Subscribe | ||
|
|
VERTICAL TYPE REACTOR IN CARBON STEEL OF 2.5 METERS OF INTERNAL DIAMETER X 3.75 METERS OF HEIGHT; IT CONSISTS OF A CALANDRIA OF 1310 TUBES, WITH A LENGTH OF 4877 MM; INTERNAL DIAMETER OF 45.3 MM. / REACTOR TIPO VERTICAL EN ACERO AL CARBON DE 2.5 METROS DE DIAMETRO INTERNO X 3.75 METROS DE ALTURA; CONSTA DE UNA CALANDRIA DE 1310 TUBOS, CON UNA LONGITUD DE 4877 MM; DIAMETRO INTERNO DE 45.3 MM.
|
🔒 Subscribe | |||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH. / REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 36 M3; PRESION DE DISENO 11.14KG/M2; TEMPERATURA DE DISENO 175C; ESPESOR 0.875"; CUENTA CON AGITADOR TIPO TURBINA MOVIDA POR MOTOR ELECTRICO DE 75 HP A 1785 RPM, MODELO A17954, CUENTA CON 3 DISTRIBUIDORES CIRCULARES CONCENTRICOS LOCALIZADOS EN EL FONDO DEL MISMO, A TRAVES DE ORIFICIOS DE 3MM DE DIAMETRO, PRESION DE OPERACION CON 10.8 KG/CM2 Y TEMPERATURA DE 168 C; SISTEMA DE SELLOS DE AGITADOR ES CON AGUA DE ALTA PRESION; CUENTA CON MAMPARA PARA DISTRIBUCION DE FLUJO; MEDIDAS APROXIMADAS 3.5 METROS DE DIAMETRO INTERNO X 3.7 METROS DE ALTURA.
|
🔒 Subscribe | ||
|
|
SEPARATOR TANK VERTICAL TYPE IN STAINLESS STEEL 316L; 3.0 METERS INTERNAL DIAMETER. X 11.5 METERS HIGH WITH 2 SECTIONS OF 2.5 METERS PACKED WITH 2 RASHING RINGS, WITH CAPACITY OF 80 M3, WITH INTERFACE TRANSMITTER (ILIC-5S58). / TANQUE SEPARADOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; 3.0 METROS DIAMETRO INTERNO. X 11.5 METROS DE ALTURA CON 2 SECCIONES DE 2.5 METROS EMPACADAS CON ANILLOS RASHING DE 2", CON CAPACIDAD DE 80 M3, CUENTA CON TRANSMISOR DE INTERFASE (ILIC-5S58).
|
🔒 Subscribe | |||
|
|
2014 | AFL |
2014 AFL STAINLESS STEEL HEAT EXCHANGER 316L; DESIGN PRESSURE COVERED 24.85KG/CM2; DESIGN TEMPERATURE 200C; PLATE THICKNESS 0.625, NUMBER OF TUBES 804 OF 1.0 OUTSIDE DIAMETER; TUBE SIDE 16.35KG/CM2; SERIES 40845, CLASS R. / INTERCAMBIADOR DE CALOR EN ACERO INOXIDABLE 316L; PRESION DE DISENO CUBIERTA 24.85KG/CM2; TEMPERATURA DE DISENO 200C, ANO 2014; ESPESOR DE PLACA 0.625", NUMERO DE TUBOS 804 DE 1.0" DE DIAMETRO EXTERNO; LADO TUBOS 16.35KG/CM2; TIPO AFL; SERIE 40845, CLASE R.
|
🔒 Subscribe | |
|
|
SEPARATOR TANK VERTICAL TYPE IN STAINLESS STEEL 316L; 3.0 METERS INTERNAL DIAMETER X 11.5 METERS HIGH; WITH 2 SECTIONS OF 2.5 METERS PACKED WITH 1 PALL RINGS; WITH CAPACITY OF 70 M3, DIVIDED IN 2 COMPARTMENTS EQUIPPED WITH PACKING BED TYPE 1 PALL RINGS OF CARBON STEEL, WITH INTERFACE TRANSMITTER (ILIC-5D301). / TANQUE SEPARADOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; 3.0 METROS DIAMETRO INTERNO X 11.5 METROS DE ALTURA; CON 2 SECCIONES DE 2.5 METROS EMPACADAS CON ANILLOS PALL DE 1"; CON CAPACIDAD DE 70 M3, DIVIDIDO EN 2 COMPARTIMIENTOS EQUIPADOS CON CAMA DE EMPAQUE TIPO ANILLOS PALL DE 1" DE ACERO AL CARBON, CON TRANSMISOR DE INTERFASE (ILIC-5D301).
|
🔒 Subscribe | |||
|
|
2012 |
2012 CONDENSER, PRESSURE 273 PSI; SIZE 30" BY 192'; MINIMUM TEMPERATURE 270F; WITH AN AREA OF 79.2 M3; / CONDENSADOR, PRESION DE 273 PSI; TAMANO 30" POR 192'; TEMPERATURA MINIMA 270F; CON UN AREA DE 79.2 M3; ANO 2012.
|
🔒 Subscribe | ||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH. / REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 36 M3; PRESION DE DISENO 11.14KG/M2; TEMPERATURA DE DISENO 175C; ESPESOR 0.875"; CUENTA CON AGITADOR TIPO TURBINA MOVIDA POR MOTOR ELECTRICO DE 75 HP A 1785 RPM, MODELO A17954, CUENTA CON 3 DISTRIBUIDORES CIRCULARES CONCENTRICOS LOCALIZADOS EN EL FONDO DEL MISMO, A TRAVES DE ORIFICIOS DE 3MM DE DIAMETRO, PRESION DE OPERACION CON 10.8 KG/CM2 Y TEMPERATURA DE 168 C; SISTEMA DE SELLOS DE AGITADOR ES CON AGUA DE ALTA PRESION; CUENTA CON MAMPARA PARA DISTRIBUCION DE FLUJO; MEDIDAS APROXIMADAS 3.5 METROS DE DIAMETRO INTERNO X 3.7 METROS DE ALTURA.
|
🔒 Subscribe | ||
|
|
VERTICAL TANK IN CARBON STEEL, FLAT/CONICAL LIDS, INSIDE DIAMETER 3.518M; CYLINDER HEIGHT 3M, WITH LEVEL TRANSMITTER, WITHOUT DATA PLATE. / TANQUE VERTICAL EN ACERO AL CARBON, TAPAS PLANAS/CONICA, DIAMETRO INTERIOR 3.518M; ALTURA DEL CILINDRO 3M CUENTA CON TRANSMISOR DE NIVEL, SIN PLACA DE DATOS.
|
🔒 Subscribe | |||
|
|
FLOWTEK | XPV-5A404 |
FLOWTEK XPV-5A404 10" EXTRA LARGE FLANGED SAFETY VALVE, MODEL F30, CLASS 300.
|
🔒 Subscribe | |
|
|
EVAPORATOR COLUMN IN STAINLESS STEEL 304 (THIRD EFFECT) WITH 8 PLATES INSIDE (SIEVES TYPE), 2.4M X 7.4M, IN THE LOWER PART 1 (EXCHANGER), ENVELOPE TYPE REBOILER IN CARBON STEEL, 460 TUBES IN STAINLESS STEEL 304, 45" SHELL DIAMETER X 10 FT, HEAT TRANSFER 165 M2 WITH LEVEL TRANSMITTER AND CONTROL VALVE. / COLUMNA EVAPORADORA EN ACERO INOXIDABLE 304 (TERCER EFECTO) CUENTA CON 8 PLATOS EN SU INTERIOR (TIPO SIEVES), 2.4M X 7.4M, EN PARTE INFERIOR 1 (INTERCAMBIADOR) REHERVIDOR TIPO ENVOLVENTE EN ACERO AL CARBON, 460 TUBOS EN ACERO INOX 304, 45" DIAMETRO DE CORAZA X 10 FT, TRANSFERENCIA DE CALOR 165 M2 CUENTA CON TRANSMISOR DE NIVEL Y VALVULA DE CONTROL
|
🔒 Subscribe | |||
|
|
CARBON STEEL VERTICAL STORAGE TANK, MEASURES APPROXIMATELY 1.2 M IN DIAMETER X 1.5 M IN HEIGHT, TOTAL CAPACITY APPROXIMATELY 2.1 M3, WITH LEVEL TRANSMITTER; (STORED WARM WATER). / TANQUE VERTICAL DE ALMACENAMIENTO EN ACERO AL CARBON, MEDIDAS APROXIMADAS 1.2 M DE DIAMETRO X 1.5 M DE ALTURA, CAPACIDAD TOTAL APROXIMADA 2.1 M3, CUENTA CON TRANSMISOR DE NIVEL; (ALMACENABA AGUA TIBIA).
|
🔒 Subscribe | |||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10.8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH.
|
🔒 Subscribe | ||
|
|
CARBON STEEL VERTICAL STORAGE TANK, MEASURES APPROXIMATELY 1.1 M IN DIAMETER X 1.4 M IN HEIGHT, TOTAL CAPACITY APPROXIMATELY 1.04 M3, WITH LEVEL TRANSMITTER AND CONTROL VALVE, 1 1/2", 150 PSI; (STORED HOT WATER). / TANQUE VERTICAL DE ALMACENAMIENTO EN ACERO AL CARBON, MEDIDAS APROXIMADAS 1.1 M DE DIAMETRO X 1.4 M DE ALTURA, CAPACIDAD TOTAL APROXIMADA 1.04 M3, CUENTA CON TRANSMISOR DE NIVEL Y VALVULA DE CONTROL, 1 1/2", 150 PSI; (ALMACENABA AGUA CALIENTE).
|
🔒 Subscribe | |||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH.
|
🔒 Subscribe | ||
|
|
SWEQUIPOS |
SWEQUIPOS STAINLESS STEEL GRADING AND SIEVING MACHINE, WITHOUT DATA PLATE, MEASURES APPROXIMATELY 1.80 M IN DIAMETER X 1.20 M IN HEIGHT. PLEASE INSPECT / CRIBA EN ACERO INOXIDABLE MARCA SWEQUIPOS, SIN PLACA DE DATOS, MEDIDAS APROXIMADAS 1.80 M EN DIAMETRO X 1.20 M DE ALTURA. FAVOR DE INSPECCIONAR
|
🔒 Subscribe | ||
|
|
25 MANUAL VALVES: 1 6" 150 GATE CARBON STEEL, 1 8" 150 GATE CARBON STEEL, 4 2" 150 BALL CARBON STEEL, 1 2" 150 GATE CARBON STEEL, 1 1" 150 BALL CARBON STEEL, 3 3" 150 GATE CARBON STEEL, 3 2" 300 GATE STAINLESS STEEL, 1 2" 300 GATE CARBON STEEL, 2 3" 150 BALL STAINLESS STEEL, 2 1.5" 150 GATE CARBON STEEL, 1 2" 300 GATE CARBON STEEL, 2 3" 150 BALL STAINLESS STEEL, 2 1.5" 150 BALL CARBON STEEL, 3 X 1.5" 150 GATE CARBON STEEL, 1 X 2" 150 CHECK SPECIAL STEEL, 1 X 2" 300 GATE SPECIAL STEEL, 1 X 3/4" 150 GATE SPECIAL STEEL / 25 VALVULAS MANUALES: 1 DE 6" 150 COMPUERTA ACERO AL CARBON, 1 DE 8" 150 COMPUERTA ACERO AL CARBON, 4 DE 2" 150 BOLA ACERO AL CARBON, 1 DE 2" 150 COMPUERTA ACERO AL CARBON, 1 DE 1" 150 BOLA ACERO AL CARBON, 3 DE 3" 150 COMPUERTA ACERO AL CARBON, 3 DE 2" 300 COMPUERTA ACERO INOXIDABLE, 1 DE 2" 300 COMPUERTA ACERO AL CARBON, 2 DE 3" 150 BOLA ACERO INOXIDABLE, 2 DE 1.5" 150 BOLA ACERO AL CARBON, 3 DE 1.5" 150 COMPUERTA ACERO AL CARBON, 1 DE 2" 150 CHECK ACERO ESPECIAL, 1 DE 2" 300 COMPUERTA ACERO ESPECIAL, 1 DE 3/4" 150 COMPUERTA ACERO ESPECIAL
|
🔒 Subscribe | |||
|
|
2 X 3" 150 GATE CARBON STEEL VALVES, 3 X 2" 150 BALL A/C VALVES, 10 X 1 1/2" 150 BALL CARBON STEEL VALVES; 1 X 1 1/2" 150 GATE CARBON STEEL VALVE; 2 X 4" 150 BALL CARBON STEEL VALVES
|
🔒 Subscribe | |||
|
|
11 MANUAL VALVES: 1 OF 8" 150 AI GATE, 1 OF 3" 150 AI GATE, 1 OF 3" 150 AI GATE STEEL / 11 VLVULAS - 11 MANUAL VALVES: 1 OF 8 150 AI GATE, 1 OF 3 150 AI GATE, 1 OF 3 150 AI GATE STEEL / 11 VALVULAS MANUALES: 1 DE 8" 150 COMPUERTA AI, 1 DE 3" 150 COMPUERTA ACERO INOXIDABLE, 2 DE 3" 150 COMPUERTA ACERO AL CARBON, 2 DE 2" 150 BOLA ACERO INOXIDABLE, 1 DE 2" 150 COMPUERTA ACERO INOXIDABLE, 1 DE 3" 300 COMPUERTA ACERO AL CARBON, 2 DE 1.5" BOLA ACERO AL CARBON, 1 DE 2" 150 COMPUERTA ACERO AL CARBON
|
🔒 Subscribe | |||
|
|
14 MANUAL VALVES: 3 1.5" 150 BALL CARBON STEEL, 1 1" 150 BALL CARBON STEEL, 2 1.5" 150 GATE CARBON STEEL, 2 3" 150 GATE CARBON STEEL, 1 1.5" 150 BALL SPECIAL STEEL, 2 6" 150 BALL CARBON STEEL, 3 2" 150 BALL CARBON STEEL
|
🔒 Subscribe | |||
|
|
17 MANUAL VALVES: 4 OF 1" 150 COMP. CARBON STEEL. 2 OF 2" THREADED BALL VALVES. 17 VLVULAS MANUALES - 17 MANUAL VALVES: 4 OF 1" 150 COMP. CARBON STEEL. 2 OF 2" THREADED BALL VALVES. 17 VALVULAS MANUALES: 4 DE 1" 150 COMP. ACERO AL CARBON. 2 DE 2" ROSCABLES DE BOLA INOX. 1 DE 2" 150 BOLA INOX. 4 DE 2" 150 COMP. ACERO AL CARBON. 1 DE 2" 150 MACHO INOX. 2 DE 6" 150 COMP. ACERO AL CARBON. 1 DE 4" 150 COMP. ACERO AL CARBON. 1 DE 4" 150 BOLA ACERO AL CARBON. 1 DE 4" 150 MACHO ALEACION.
|
🔒 Subscribe | |||
|
|
1998 | GE | CHEK-22984001 |
1998 GE CHEK-22984001 ELECTRIC INDUCTION MOTOR, CAPACITY 4000 HP, 4160 V, 1780 RPM S/N: 980831497
|
🔒 Subscribe |
|
|
1998 | GE | GHEK-22244001 |
1998 GE GHEK-22244001 ELECTRIC INDUCTION MOTOR, CAPACITY 3000 HP, 4160 V, 1780 RPM S/N: 980831496
|
🔒 Subscribe |
|
|
INGERRSOLL RAND | EPF18M3HAD |
COMPRESSOR OF 3 STEPS MOVED BY ELECTRIC MOTOR OF 500 HP 3578 RPM SERIES E134-15-01-1 CENTRIFUGAL TYPE PRESSURE OF 12.5 KG/CM2, COMPRESSOR HAS 2 INTERCOOLERS HAVE LUBRICATION SYSTEM. BRAND CENTA CARBON STEEL (INGERRSOLL RAND). MODEL EPF18M3HAD; INCLUDES PNEUMATIC RECIRCULATION VALVE; MEZANNINE IN IPR STRUCTURE OF 8, WITH IRVING MESH AND MARINE LADDER; DOES NOT INCLUDE VALVE TRAIN.
|
🔒 Subscribe | |
|
|
AIR COMPRESSOR OF 1 STEP, DRIVEN BY 250 HP ELECTRIC MOTOR AT 3585 RPM, SUCKS FROM THE DISCHARGE OF THE K-521 TO RAISE THE PRESSURE FROM 10.5 TO 12.5 KG/CM2.BOOSTER TYPE CAPACITY 11,427 KG/HR; INCLUDES 2 INTERCOOLERS AND CONTROL BOARD. / COMPRESOR DE AIRE DE 1 PASO, MOVIDO POR MOTOR ELECTRICO DE 250 HP A 3585 RPM, SUCCIONA DE LA DESCARGA DEL K-521 PARA ELEVAR LA PRESION DE10.5 A 12.5 KG/CM2.TIPO BOOSTER CAPACIDAD 11,427 KG/HR; INCLUYE 2 INTERENFRIADORES Y TABLERO DE CONTROL.
|
🔒 Subscribe | |||
|
|
2014 | YORK | 11531D426466544 |
2014 YORK 11531D426466544 CHILLER, REFRIGERANT TYPE 410A, 20 AMP, 11.3 KG 25 LB, 115 V 1 PHASE 60 HZ S/N: 11531D426466544
|
🔒 Subscribe |
|
|
CYCLOHEXANE CONDENSER WITH 1190 CARBON STEEL TUBES; 1" TUBE DIAMETER; 20' TUBE LENGTH; 58" INTERNAL DIAMETER BY 20' LENGTH; WITH AN AREA OF 560 M2. / CONDENSADOR DE CICLOHEXANO ENVOLVENTE CON 1190 TUBOS DE ACERO AL CARBON; DIAMETRO DE TUBOS 1"; LONGITUD. DE TUBOS 20' ; DE 58" DE DIAMETRO INTERNO POR 20' DE LONGITUD. CON UN AREA DE 560 M2.
|
🔒 Subscribe | |||
|
|
CARBON STEEL CONDENSER WITH VACUUM EJECTOR (J-525) WORKING WITH MEDIUM PRESSURE STEAM.AREA 5.25M2,SHELL DIAMETER 8.1,NO.OF TUBES 48,TUBE DIAMETER 3/4,TUBE LENGTH 8',TUBE PITCH 4. / CONDENSADOR EN ACERO AL CARBON CON EYECTOR (J-525) DE VACIO QUE TRABAJA CON VAPOR DE MEDIA PRESION. AREA 5.25M2,DIAMETRO DE CORAZA 8.1",NO.DE TUBOS 48,DIAMETRO DE TUBOS 3/4",LONGUITUD.DE TUBOS 8',PASOS POR TUBOS 4.
|
🔒 Subscribe | |||
|
|
CARBON STEEL CONDENSER WITH VACUUM EJECTOR (J-524) WORKING WITH MEDIUM PRESSURE STEAM PLUS AUXILIARY MEDIUM PRESSURE EJECTOR.AREA 11.0M2,SHELL DIAMETER 10.2,NO.OF TUBES 76,TUBE DIAMETER 3/4,TUBE LENGTH 8',TUBE PITCH 4. / CONDENSADOR EN ACERO AL CARBON CON EYECTOR (J-524) DE VACIO QUE TRABAJA CON VAPOR DE MEDIA PRESION MAS EYECTOR AUXILIAR DE MEDIA PRESION. AREA 11.0M2,DIAMETRO DE CORAZA 10.2",NO.DE TUBOS 76,DIAMETRO DE TUBOS 3/4",LONGUITUD.DE TUBOS 8',PASOS POR TUBOS 4.
|
🔒 Subscribe |
AIR COMPRESSORS
AIR COMPRESSOR OF 4 STEPS OF 1 TURBINE MOVED BY STEAM OF HIGH PRESSURE OF 32 KG/CM2 RAISES PRESSURE ...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
CARBON STEEL COLUMN EQUIPPED WITH 21 CARBON STEEL SIEV TYPE PLATES AND MEDIUM HEATING REBOILER FOR M...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
CARBON STEEL COLUMN EQUIPPED WITH 21 CARBON STEEL SIEV TYPE PLATES AND MEDIUM HEATING REBOILER FOR M...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
DRYING COLUMN IN CARBON STEEL EQUIPPED WITH 15 SIEV TYPE CARBON STEEL PLATES AND MEDIUM HEATING REBO...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
TWO-SECTION CARBON STEEL COLUMN: UPPER SECTION EQUIPPED WITH 18 CARBON STEEL SIEV TYPE PLATES; LOWER...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
EXTRACTOR COLUMN IN CARBON STEEL PACKED WITH 900' OF 1/12" PALL RINGS, MEASURES: 2.0 M INTERNAL DIA ...
Hammer Price:
🔒
14742320-100
AIR COMPRESSORS
COMPRESSOR FOR ORGANIC GASES RECIPROCATING TYPE, DRIVEN BY 50 HP ELECTRIC MOTOR AT 1785 RPM MODEL 14...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
CARBON STEEL CONDENSER; AREA 122M2, SHELL DIAMETER 39", NO. OF TUBES 432, TUBE DIAMETER 1", TUBE LEN...
Hammer Price:
🔒
MISC
CARBON STEEL CONDENSER; AREA 54.8M2, SHELL DIAMETER 28", NO. OF TUBES 282, TUBE DIAMETER 1", TUBE LE...
Hammer Price:
🔒
MISC
CARBON STEEL CONDENSER; AREA 322M2, SHELL DIAMETER 66", NO. OF TUBES 552, TUBE DIAMETER 1", TUBE LEN...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN CARBON STEEL OF 2.5 METERS OF INTERNAL DIAMETER X 3.75 METERS OF HEIGHT; IT...
Hammer Price:
🔒
1971
MISC
1971 HEAT EXCHANGER; DESIGN PRESSURE 1.28 GK/CM2, WORKING TEMPERATURE 260C, AREA 188 M2; SHELL DIAME...
Hammer Price:
🔒
MISC
CARBON STEEL CONDENSER; AREA 58M2, SHELL DIAMETER 27", NO. OF TUBES 246, TUBE DIAMETER 1", TUBE LENG...
Hammer Price:
🔒
1971
OIL & GAS EQUIPMENT
1971 CARBON STEEL OIL GAS SEPARATOR; DESIGN PRESSURE 3.65 KG/CM2; DESIGN TEMPERATURE 65 C, CAPACITY ...
Hammer Price:
🔒
1971
CHEMICAL PROCESSING EQUIPMENT
1971 HEAT EXCHANGER; DESIGN PRESSURE 1.28 GK/CM2, WORKING TEMPERATURE 260C, AREA 188 M2; SHELL DIAME...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN CARBON STEEL OF 2.5 METERS OF INTERNAL DIAMETER X 3.75 METERS OF HEIGHT; IT...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
MISC
SEPARATOR TANK VERTICAL TYPE IN STAINLESS STEEL 316L; 3.0 METERS INTERNAL DIAMETER. X 11.5 METERS HI...
Hammer Price:
🔒
2014 AFL
CHEMICAL PROCESSING EQUIPMENT
2014 AFL STAINLESS STEEL HEAT EXCHANGER 316L; DESIGN PRESSURE COVERED 24.85KG/CM2; DESIGN TEMPERATUR...
Hammer Price:
🔒
MISC
SEPARATOR TANK VERTICAL TYPE IN STAINLESS STEEL 316L; 3.0 METERS INTERNAL DIAMETER X 11.5 METERS HIG...
Hammer Price:
🔒
2012
MISC
2012 CONDENSER, PRESSURE 273 PSI; SIZE 30" BY 192'; MINIMUM TEMPERATURE 270F; WITH AN AREA OF 79.2 M...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
VERTICAL TANK IN CARBON STEEL, FLAT/CONICAL LIDS, INSIDE DIAMETER 3.518M; CYLINDER HEIGHT 3M, WITH L...
Hammer Price:
🔒
FLOWTEK XPV-5A404
CHEMICAL PROCESSING EQUIPMENT
FLOWTEK XPV-5A404 10" EXTRA LARGE FLANGED SAFETY VALVE, MODEL F30, CLASS 300....
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
EVAPORATOR COLUMN IN STAINLESS STEEL 304 (THIRD EFFECT) WITH 8 PLATES INSIDE (SIEVES TYPE), 2.4M X 7...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
CARBON STEEL VERTICAL STORAGE TANK, MEASURES APPROXIMATELY 1.2 M IN DIAMETER X 1.5 M IN HEIGHT, TOTA...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
CARBON STEEL VERTICAL STORAGE TANK, MEASURES APPROXIMATELY 1.1 M IN DIAMETER X 1.4 M IN HEIGHT, TOTA...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
SWEQUIPOS
PACKAGING EQUIPMENT
SWEQUIPOS STAINLESS STEEL GRADING AND SIEVING MACHINE, WITHOUT DATA PLATE, MEASURES APPROXIMATELY 1....
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
25 MANUAL VALVES: 1 6" 150 GATE CARBON STEEL, 1 8" 150 GATE CARBON STEEL, 4 2" 150 BALL CARBON STEEL...
Hammer Price:
🔒
MISC
2 X 3" 150 GATE CARBON STEEL VALVES, 3 X 2" 150 BALL A/C VALVES, 10 X 1 1/2" 150 BALL CARBON STEEL V...
Hammer Price:
🔒
MISC
11 MANUAL VALVES: 1 OF 8" 150 AI GATE, 1 OF 3" 150 AI GATE, 1 OF 3" 150 AI GATE STEEL / 11 VLVULAS -...
Hammer Price:
🔒
MISC
14 MANUAL VALVES: 3 1.5" 150 BALL CARBON STEEL, 1 1" 150 BALL CARBON STEEL, 2 1.5" 150 GATE CARBON S...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
17 MANUAL VALVES: 4 OF 1" 150 COMP. CARBON STEEL. 2 OF 2" THREADED BALL VALVES. 17 VLVULAS MANUALES ...
Hammer Price:
🔒
1998 GE CHEK-22984001
ELECTRICAL AND POWER GENERATION EQUIPMENT
1998 GE CHEK-22984001 ELECTRIC INDUCTION MOTOR, CAPACITY 4000 HP, 4160 V, 1780 RPM S/N: 980831497...
Hammer Price:
🔒
1998 GE GHEK-22244001
ELECTRICAL AND POWER GENERATION EQUIPMENT
1998 GE GHEK-22244001 ELECTRIC INDUCTION MOTOR, CAPACITY 3000 HP, 4160 V, 1780 RPM S/N: 980831496...
Hammer Price:
🔒
INGERRSOLL RAND EPF18M3HAD
AIR COMPRESSORS
COMPRESSOR OF 3 STEPS MOVED BY ELECTRIC MOTOR OF 500 HP 3578 RPM SERIES E134-15-01-1 CENTRIFUGAL TYP...
Hammer Price:
🔒
AIR COMPRESSORS
AIR COMPRESSOR OF 1 STEP, DRIVEN BY 250 HP ELECTRIC MOTOR AT 3585 RPM, SUCKS FROM THE DISCHARGE OF T...
Hammer Price:
🔒
2014 YORK 11531D426466544
REFRIGERATION EQUIPMENT
2014 YORK 11531D426466544 CHILLER, REFRIGERANT TYPE 410A, 20 AMP, 11.3 KG 25 LB, 115 V 1 PHASE 60 HZ...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
CYCLOHEXANE CONDENSER WITH 1190 CARBON STEEL TUBES; 1" TUBE DIAMETER; 20' TUBE LENGTH; 58" INTERNAL ...
Hammer Price:
🔒
MISC
CARBON STEEL CONDENSER WITH VACUUM EJECTOR (J-525) WORKING WITH MEDIUM PRESSURE STEAM.AREA 5.25M2,SH...
Hammer Price:
🔒
MISC
CARBON STEEL CONDENSER WITH VACUUM EJECTOR (J-524) WORKING WITH MEDIUM PRESSURE STEAM PLUS AUXILIARY...
Hammer Price:
🔒