CNC Machine Tools and Support Equipment Complete Plant Closure Delva Tool and Machine Devens MA this location only

HURCO VMX64 CNC VERTICAL MACHINING CENTER, 3-AXIS, 30 HP, CONTROL SYSTEM: HURCO WINMAX, TABLE SIZE: 66.2 IN X 35.4 IN, SPINDLE SPEED RANGE: 10,000 RPM, TOOL CAPACITY: 40 TOOLS S/N: M642-1600144JE009

TRAK MACHINE TOOLS TRL 2470RX CNC LATHE WITH PROTOTRAK RLX CONTROL SYSTEM, SPINDLE SPEED RANGE APPROXIMATELY 150 - 3,000 RPM, SPINDLE MOTOR POWER APPROXIMATELY 10 HP, MAXIMUM SWING OVER BED 24 INCHES, DISTANCE BETWEEN CENTERS 70 INCHES S/N: 194EH035

2018 MATSUURA MV 1600 CNC VERTICAL MACHINING CENTER, FANUC SERIES OI-MF CONTROL, TABLE SIZE 70.9 IN X 31.5 IN, X-AXIS TRAVEL 64.96 IN, Y-AXIS TRAVEL 31.5 IN, Z-AXIS TRAVEL 30.71 IN, SPINDLE TAPER BT50, SPINDLE SPEED 6000 RPM, TOOL CHANGER CAPACITY 30 TOOLS S/N: 610100058

2020 API METROLOGY RADIAN PLUS HIGH-PRECISION LASER TRACKING SYSTEM, USB AND ETHERNET CONNECTIVITY, INCLUDES USB RECEIVER, POWER ADAPTER, CUSTOM CASE. LASER TECHNOLOGY: ADM - 3D/6D MAXIMUM DISTANCE RANGE (RADIAL): 50M / 80M. HORIZONTAL: A320A (640A) VERTICAL: -59A - +79A (138A). DATA OUTPUT RATE: 1000 POINTS/SEC. DISTANCE MEASUREMENT RESOLUTION: 0.5 AM. DISTANCE MEASUREMENT ACCURACY (MPE): 15AM OR 0.7AM/M. VOLUMETRIC ACCURACY (MPE): 15AM + 5AM/M. PRECISION LEVEL ACCURACY: A2 ARC SECONDS. MAXIMUM RADIAL VELOCITY: 180A/SEC. MAXIMUM RADIAL ACCELERATION: 180A/SECA2I. VISION FIELD OF VIEW: 30A (DIAGONAL). ACQUISITION RANGE: 2M A 40M. TRACKER SIZE: 198MMA2 X 430MM. TRACKER WEIGHT: 10.9 KG. INTEGRATED TRANSPORT CASE: 559 X 406 X 254MM. TOTAL TRANSPORT WEIGHT: 22.7 KG. WIFI: YES. ETHERNET: YES. LASER EMISSION CLASS: II IEC60825-1. WARM-UP TIME: 5 MINUTES. POWER SUPPLY VOLTAGE: 110/230V A10%. POWER CONSUMPTION: 60W. CONTINUOUS OPERATION BATTERY LIFE: 10 HOURS. OPERATING TEMPERATURE: -10AC TO 45AC. RELATIVE HUMIDITY: 10A95%. ALTITUDE: -700M TO 3000M. PROTECTION LEVEL: IP52A. MEASUREMENT RANGE: UP TO 50 METERS (164 FEET). ACCURACY: A15 MICROMETERS. CONNECTIVITY: WIFI, ETHERNET. POWER SUPPLY: 100-240V AC. DIMENSIONS: APPROX. 14 X 7 X 7 INCHES (35.6 X 17.8 X 17.8 CM). INCLUDED ACCESSORIES: USB RECEIVER, POWER ADAPTER, CUSTOM CASE. CALIBRATION CERTIFICATE: YES, DATED 05/5/2023. ADDITIONAL FEATURES: REMOTE OPERATION CAPABILITY. S/N: 70612

2019 METHODS MV 1000H CNC VERTICAL MACHINING CENTER, FANUC OI-MF CONTROL SYSTEM, SPINDLE SPEED UP TO 12,000 RPM, 3 AXES, TABLE SIZE 40 X 20 INCHES S/N: 6MVJ00057

2013 HWACHEON T2-1T SMC CNC LATHE, FANUC OI-TF CONTROL SYSTEM, CHIP CONVEYOR, MOTOR POWER 0.4 KW, MAIN CHAIN RF 2060R, LINK WIDTH 75L, POWER SUPPLY 220/380V 50/60HZ S/N: M0283611E1

2014 HEXAGON METROLOGY GLOBAL PERFORMANCE 7.10.7 CMM, MEASUREMENT RANGE 700 MM X 1000 MM X 700 MM (27.6 IN X 39.4 IN X 27.6 IN), ACCURACY 1.8 + L/333 AM, INCLUDES TESASTAR-M PROBE S/N: 0214-1413 UA

MATSUURA H.PLUS-405 CNC HORIZONTAL MACHINING CENTER, CONTROL SYSTEM: FANUC, SPINDLE SPEED: UP TO 15,000 RPM, SPINDLE TAPER: BT40, TOOL MAGAZINE CAPACITY: 90 TOOLS, AXIS TRAVEL (X, Y, Z): 22 INCH X 22 INCH X 22 INCH (560MM X 560MM X 560MM) S/N: 010414921

LEICA ABSOLUTE TRACKER LASER CMM W/MEASUREMENT CART AND AT CONTROLLER 900 S/N: 3905

FANUC ROBODRILL I-T14IB CNC MILLING MACHINE, 3 AXIS + 1 OPTIONAL, UP TO 10,000 RPM, 14 TOOL CAPACITY, FANUC SERIES 16I-M CONTROLLER S/N: 00XTL348

1999 MATSUURA MC-550VG CNC VERTICAL MACHINING CENTER, YASNAC CONTROL SYSTEM, 200V +/- 10%, 60HZ +/- 1HZ, 24 KVA, 69 AMPS, 3 PHASE, APPROX. DIMENSIONS 110" X 80" X 100", APPROX. WEIGHT 9,000 LBS, SPINDLE SPEED UP TO 8,000 RPM, TOOL CHANGER CAPACITY 20 TOOLS, TABLE SIZE APPROX. 31.5" X 15.7" S/N: 10472

HASS HA5C4 SINGLE AXIS ROTARY INDEXER S/N: 803838

NAKAMURA-TOME SC-300L CNC LATHE, FANUC 21-T CONTROL SYSTEM, MAXIMUM TURNING DIAMETER: 13.77 INCHES (350 MM), MAXIMUM TURNING LENGTH: 23.62 INCHES (600 MM), SPINDLE BORE: 3.07 INCHES (78 MM), SPINDLE SPEED: 4,000 RPM, NUMBER OF TOOLS: 12, TURBO CONVEYOR

2007 CHEVROLET SILVERADO 3500 FLATBED TRUCK, 6.0L V8 ENGINE, AUTOMATIC TRANSMISSION, 2WD, GVWR 12,000 LBS (5,443 KG), TOWING CAPACITY 13,000 LBS (5,897 KG), BED SIZE 8 FT X 7 FT (2.44 M X 2.13 M), CLOTH SEATS, STEEL FLATBED, MESH HEADBOARD S/N: 62650

NAKAMURA-TOME SLANT JR. CNC LATHE, FANUC CONTROL, MAXIMUM SWING OVER BED APPROXIMATELY 16 INCHES (406 MM), MAXIMUM TURNING DIAMETER APPROXIMATELY 10 INCHES (254 MM), MAXIMUM TURNING LENGTH APPROXIMATELY 20 INCHES (508 MM), SPINDLE SPEED RANGE UP TO 4000 RPM, SPINDLE MOTOR POWER 10 HP, NUMBER OF TOOLS 8, CHUCK SIZE 8 INCHES (203 MM) S/N: 15605

NAKAMURA-TOME TMC-20 II CNC LATHE, FANUC SERIES 18-T CONTROL, TURBO CONVEYOR, SPINDLE SPEED UP TO 4,000 RPM, MAX TURNING DIAMETER 11.8 INCH (300 MM), MAX TURNING LENGTH 19.7 INCH (500 MM), 2 AXES, 12-STATION TURRET, DIMENSIONS 100 X 65 X 65 INCH (2540 X 1651 X 1651 MM), WEIGHT 13,000 LBS (5896 KG), POWER REQUIREMENTS 220V, 3 PHASE S/N: M20104

2016 SUBARU FORESTER SUV, 145,785 MILES, AUTOMATIC TRANSMISSION, ALL-WHEEL DRIVE, BLUE EXTERIOR, GRAY INTERIOR, 4 DOORS, GASOLINE FUEL TYPE, GVWR 4480 LBS (2032 KG), P225/60R17 TIRES, 17-INCH WHEELS, EQUIPPED WITH ROOF RAILS, CLOTH SEATS, POWER WINDOWS, AIR CONDITIONING. S/N: JF2SJAHCXGH402924

1994 MATSUURA MC-510VF CNC VERTICAL MACHINING CENTER, 3-AXIS, 6,000 RPM SPINDLE SPEED, 10 HP SPINDLE MOTOR POWER, TABLE SIZE 31.5 INCH X 14.2 INCH, TRAVEL 20 INCH X 14 INCH X 18 INCH, 20 TOOL CHANGER CAPACITY, YASNAC CNC CONTROL S/N: 940310735

NAKAMURA-TOME SLANT JR CNC LATHE, FANUC CONTROL, 10 STATION TURRET, COLLET CHUCK S/N: 12033

NAKAMURA-TOME TMC-15 CNC LATHE, FANUC SERIES 0-T CONTROLLER, SWING OVER BED APPROX. 16 INCHES (406 MM), MAXIMUM MACHINING DIAMETER APPROX. 8 INCHES (203 MM), MAXIMUM MACHINING LENGTH APPROX. 14 INCHES (356 MM), SPINDLE SPEED RANGE 60 - 4000 RPM, 8 TOOL CAPACITY S/N: R11403

2014 ROMER RA-7536-3 PORTABLE CMM ARM, 7 AXIS, 10 FT (3 M) MEASUREMENT RANGE, 0.001 IN (0.025 MM) ACCURACY, 0.0001 IN (0.0025 MM) RESOLUTION S/N: 7535-3467-UC

NAKAMURA-TOME TMC-15 CNC LATHE, GE FANUC SERIES 0-T CONTROL, 8 STATION TURRET, COLLET CHUCK, TAILSTOCK

MATSUURA MAM-600HF-PC2 HORIZONTAL MACHINING CENTER, MATSUURA MAM-600HF-PC2 CNC MACHINE, 30,000 RPM SPINDLE SPEED, 60 TOOL CAPACITY, MATSUURA SYSTEM E80 CONTROL, PALLET CHANGER INCLUDED S/N: 80B32126

GORBEL OVERHEAD CRANE SYSTEM, ELECTRIC, STEEL, BLUE S/N: G118533-5

LISTA CABINET W/PERISHABLE TOOLING AND MISC.

MATSUURA MC-800VF CNC VERTICAL MACHINING CENTER, FANUC CONTROL, TABLE SIZE: 40.16 X 20.08 INCHES, X-AXIS TRAVEL: 31.5 INCHES, Y-AXIS TRAVEL: 20.1 INCHES, Z-AXIS TRAVEL: 20.1 INCHES, SPINDLE SPEED: 8,000 RPM, TOOL CHANGER CAPACITY: 30 TOOLS S/N: 941010949

WILTON 3410 HORIZONTAL/VERTICAL BAND SAW, 7X12IN CAPACITY S/N: 04057535

LISTA CABINET W/PERISHABLE TOOLING AND MISC.

TOPLINE MR. DEBURR DB 300 DEBURRING MACHINE, 3 FT

(3) CABINETS W/TAPS AND TWIST DRILLS

ROUSSEAU 10-DRAWER TOOL STORAGE CABINET

ROUSSEAU TOOL CABINET W/7 DRAWERS AND INSPECTION CONTENT

LISTA INDUSTRIAL WORKBENCH WITH INTEGRATED STORAGE CABINET, 72 X 30 X 36 INCHES, METAL AND WOOD, INCLUDES SOME DRAWER CONTENTS (VARIOUS PARTS)

(2) FIXTURE TOMBSTONES

STORAGE CABINET WITH 20 DRAWERS, ROLLER CONVEYOR AND CANTILEVER RACK COMBO, 144 INCH X 28 INCH X 28 INCH. REAR RACK IS 36 INCH HIGH, WITH ROLLER CONVEYOR. FEATURES ROLLER CONVEYOR ON TOP, STORAGE DRAWERS, SHELVING UNIT. METAL CONSTRUCTION, GREEN COLOR.

METAL TOP INDUSTRIAL STORAGE WORKBENCH ON CASTERS, 72 INCH X 42 INCH X 36 INCH, 13 DRAWERS

HOUT TOOLSCOOT TOOLING CART WITH BT 40 TOOL HOLDERS, APPROX. 24 HOLDERS

ROCK OF AGES GRANITE SURFACE PLATE, 72X48 INCHES, 12 INCHES THICK, ACCURACY GRADE 0.0001600 INCHES, 6028 LBS S/N: 5999-917

HOUT STORAGE UNIT W/TWIST DRILLS

SMOKE-HOG INDUSTRIAL AIR CLEANERS

AMADA HA250 HORIZONTAL BANDSAW, 10 X 12 CAP. METAL CUTTING BANDSAW S/N: 25400066

(3) INDUSTRIAL RACK, 7' X 30" X 102"

WOOD TOP WORKBENCH, 48 INCH X 30 INCH X 38 INCH AND WOOD TOP WORKBENCH W/CONTENT 88 INCH X 30 INCH X 38 INCH

CNC TOOL HOLDERS W/COLLET CHUCK

APPROX. 145 BT 40 TOOL HOLDERS AND (2) TOOLING CABINETS 55 INCH X 29 INCH X 50 INCH

AEM 6025 INDUSTRIAL BELT SANDER, 25 INCH MAX WORKING WIDTH, BELT SPEED 20 - 60 FPM S/N: 996025MT09

2008 KENT INDUSTRIAL U.S.A. INC. KGS618 SURFACE GRINDER, 6"X18" CHUCK, 220V, 3-PHASE, 2 HP SPINDLE MOTOR, 8" GRINDING WHEEL SIZE, 330 LBS MAXIMUM TABLE LOAD, COOLANT SYSTEM, MAGNETIC CHUCK S/N: 9601764

BT 130 TOOL HOLDERS, APPROX. 30 INCH

LOT OF THREAD AND PLUG GAGES

LOT OF 3 RACKING UNITS, (2) 14.5' X 30 INCH X 12' AND (1) 60 INCH X 30 INCH X 82 INCH