Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
48 INCH DIAMETER STAINLESS STEEL COATING PAN WITH 24 INCH DIAMETER FRONT OPENING, EQUIPPED WITH STAINLESS STEEL AND TEFLON BAFFLES. MOUNTED ON AN ANGLED BASE WITH ENCLOSED DRIVE SYSTEM. DRIVE ASSEMBLY INCLUDES 3 HP, 1730 RPM, 230/460V, 3/60HZ GEAR MOTOR WITH 25:1 GEARBOX RATIO, OPERATING THROUGH A CHAIN AND SPROCKET ASSEMBLY. PREVIOUSLY USED FOR COATING VITAMIN GUMMIES.
|
🔒 Subscribe | |||
|
|
48 INCH DIAMETER STAINLESS STEEL COATING PAN WITH TEFLON BAFFLES. MOUNTED ON ANGLED BASES WITH ENCLOSED DRIVE SYSTEMS. 3 HP, 1730 RPM, 230/460V, 3/60HZ GEAR MOTOR WITH 25:1 GEARBOX RATIO, OPERATING THROUGH CHAIN AND SPROCKET ASSEMBLIES. PREVIOUSLY USED FOR COATING VITAMIN GUMMIES.
|
🔒 Subscribe | |||
|
|
SPX / WAUKESHA | 030 U2 |
PUMP, POSITIVE, SPX / WAUKESHA, MODEL 030 U2, 1 HP, 1.5" IN/OUT - DUAL-STATION PUMP SYSTEM FEATURING TWO SPX/WAUKESHA 030 U2 POSITIVE DISPLACEMENT PUMPS. THE PUMPS HAVE A TOP FEED AND BOTTOM DISCHARGE WITH 1.5 TRI-CLAMP CONNECTIONS. MOUNTED ON A STAINLESS STEEL CART. DRIVEN BY 1 HP BALDOR WASHDOWN MOTORS (208-230/460V, 1760 RPM, 3-PHASE). INCLUDES ALLEN-BRADLEY TOUCHSCREEN CONTROL AND METTLER TOLEDO THORNTON 770 DIGITAL CONTROLLER. LAST USED IN PHARMACEUTICAL OPERATIONS.
|
🔒 Subscribe | |
|
|
MOYNO | FB2F SSE 3SAA |
10 HP MOYNO PROGRESSIVE CAVITY PUMP, MODEL FB2F SSE 3SAA - CONSTRUCTED FROM STAINLESS STEEL FOR CORROSION RESISTANCE. DRIVEN BY A 10 HP MOTOR. LAST OPERATED FOR FOOD WASTE TO ANIMAL FEED CONVERSION.
|
🔒 Subscribe | |
|
|
2000 | AARON PROCESS | MBG200-125 |
2000 AARON PROCESS MBG200-125 SIGMA MIXER, 200 GALLON (26.74 CUBIC FEET) CAPACITY, ALL STAINLESS STEEL CONSTRUCTION, JACKETED TROUGH, DOUBLE NOBBEN BLADES, CORED SHAFTS. MIXING/DRYING CHAMBER INCLUDES VACUUM COVER AND IS JACKETED, RATED FOR 200 PSI AT 450 DEGREES FAHRENHEIT / -20 DEGREES FAHRENHEIT, ASME CODE CONSTRUCTED. MIXING CHAMBER MEASURES 48" X 40" X 44" DEEP AND INCLUDES (2) 6" DIAMETER FLANGED DISCHARGES WITH BALL VALVES. BLADES ARE OVERLAPPING DOUBLE NOBBEN BLADES AND DRIVEN BY 125 HP MOTOR THRU HEAVY DUTY GEARBOX, 160 AMPS AND 460 VOLTS. INCLUDES CONTROL PANEL, POWER PANEL WITH STARTERS AND VFD'S, STEAM-TO-WATER HEAT EXCHANGER, HYDRAULIC PUMP/RESERVOIR. ALSO INCLUDES TOP MOUNTED, STAINLESS STEEL MIKRO PULSAIRE DUST COLLECTOR, MODEL 10-2-FV TR. S/N: 00200125643MBG
|
🔒 Subscribe |
|
|
ROSS | HSM 401SC2 |
2 HP ROSS MODEL HSM 401SC2 HIGH SHEAR INLINE MIXER, 316 STAINLESS STEEL. RATED 66 GALLON PER MINUTE (WATER). NON-JACKETED CHAMBER APPROXIMATELY 3-1/2 INCH DIAMETER X 2-1/2 INCH DEEP, ROTOR APPROXIMATELY 3-7/16 INCH DIAMETER, SLOTTED STATOR APPROXIMATELY 2-1/2 INCH DIAMETER. 1-1/2 INCH TRI-CLAMP INLET/OUTLET. DRIVEN BY 2 HP, 3/60/200/240 VOLT, 3425 RPM STAINLESS STEEL WASH DOWN MOTOR. INCLUDE MECHANICAL SEAL WITH LUBRICATOR, AND AN AC TECH MC SERIES INTELLIGENT DRIVE. MOUNTED ON A STAINLESS STEEL BASE WITH CASTERS. S/N: 105517
|
🔒 Subscribe | |
|
|
HKC | ULTRASONIC SEPARATOR |
2000 HKC ULTRASONIC SEPARATOR WITH 24 INCH DIAMETER SCREENING DECK INCLUDING DUAL DRIVE SIDE MOUNTED VIBRATORS, CONNECTED TO LENZE AC TECH VARI-SPEED CONTROLLER. TOP DECK INCLUDES TOP COVER WITH CENTER TOP OPENING, SIDE DISCHARGE OFF TOP DECK AND CENTER BOTTOM DISCHARGE FROM BOTTOM DECK. MOUNTED AND UNITIZED ON STAINLESS STEEL FRAME. ALL PORTS HAVE TRI-CLAMP FITTINGS. LAST USED FOR SCREENING OF POWDERED METALS. INCLUDES DUKANE IQ PROBE GENERATORS FOR EACH SIDE MOUNTED VIBRATOR. URAS VIBRATOR MODEL KEE-6-4BRWK, 230/460V, IP66 WASHDOWN RATED, 1,665/1720 RPM. SCREEN WAS PREVIOUSLY FED BY VOLUMETRIC SCREW FEEDER.
|
🔒 Subscribe | |
|
|
BREDDO | LDDW |
100-GALLON STAINLESS STEEL JACKETED MIXER, LIQUIFIER, MODEL LDDW. EQUIPPED WITH A 15 HP MOTOR, OPERATING AT 230/460V, 3-PHASE, 60 HZ. DESIGNED FOR MIXING, BLENDING, AND HEATING APPLICATIONS WITH STEAM AS THE HEATING MEDIUM. RATED FOR MAXIMUM PRESSURE OF 90 PSI AND TEST PRESSURE OF 129 PSI. MOUNTED ON A STAINLESS STEEL FRAME AND INCLUDES A CENTER BOTTOM DISCHARGE.
|
🔒 Subscribe | |
|
|
SCHAEFFER | HS-25 |
200 HP DOUGH MIXER, TRIPLE BAR, SCHAEFFER MODEL HS-25, RATED FOR 2,500 POUNDS, 75 CUBIC FEET CAPACITY. STAINLESS STEEL CONSTRUCTION WITH TILT TROUGH. HYDRAULIC DRIVE FOR TILT MECHANISM. TROUGH IS JACKETED (HAS BEEN PATCHED). ONE SIDE OF MIXER ARMS HAVE BEEN SHOP WELDED AND REPAIRED. PREVIOUSLY USED AT BAKERY OPERATION FOR BAGEL DOUGH. S/N: 09C1469
|
🔒 Subscribe | |
|
|
WESTFALIA | SAMR-15037 |
LOT OF (2) CENTRIFUGES, DISC, AUTO, WESTFALIA, MODEL SAMR-15037, STAINLESS STEEL CONTACTS, 316 STAINLESS STEEL COVER. UNIT HAS A BOWL SPEED OF 4500 RPM FOR A SPECIFIC GRAVITY OF 1.0 OF THE PRODUCT TO BE PROCESSED AND 1.2 OF THE SEPARATED SOLIDS, SWALLOWING CAPACITY RATED FOR UP TO 25,000 LITERS PER HOUR. DRIVEN BY APPROXIMATELY 40 HP, 3565 RPM, 230/460V, 3-PHASE, 60 HZ VERTICALLY MOUNTED MOTOR ON COMMON FRAME. SERIAL NUMBER 1638 002, NO SERIAL NUMBER FOR THE SECOND UNIT.
|
🔒 Subscribe | |
|
|
STRONG SCOTT | 50CF |
50 CF STAINLESS STEEL RIBBON MIXER, 10 HP MOTOR. TROUGH MEASURES 39 INCH WIDE X 100 INCH LONG X 40 INCH DEEP, WITH 10 INCH X 10 INCH END BOTTOM DISCHARGE WITH MANUAL FLAP GATE VALVE, CURRENTLY DISCHARGES AT 40 INCH HEIGHT. MIXING ASSEMBLY INCLUDES DOUBLE RIBBON ASSEMBLE WITH AUGER WELDED TO COMMON CENTER SHAFT. PREVIOUSLY USED IN NUTRACEUTICAL OPERATION.
|
🔒 Subscribe | |
|
|
KEITH MACHINERY | 3-ROLL MILL |
3-ROLL MILL, 3.5 INCH X 7.5 INCH, STAINLESS STEEL, CORED ROLLS, AB CONTROLS. KEITH MACHINERY THREE-ROLL MILL WITH 3-1/2 INCH DIAMETER 7-1/2 INCH LONG STAINLESS-STEEL ROLLS, FULLY CORED FOR HEATING AND COOLING, AND EQUIPPED WITH ADJUSTABLE ROLL SPACING AND SIDE GUIDES. MANUAL HANDWHEEL ROLL CONTROLS, PRESSURE GAUGES, AND STAINLESS FEED CHUTE INCLUDED. CONTROL SYSTEM FEATURES AN ALLEN-BRADLEY PANELVIEW C400 HMI WITH START/STOP, VARIABLE SPEED, AND EMERGENCY STOP. HEAVY-DUTY BASE WITH 208V CONTROL ENCLOSURE. SUITABLE FOR REFINING AND DISPERSING VISCOUS FOOD MATERIALS AS WELL AS COSMETIC, CHEMICAL, AND SPECIALTY FORMULATIONS.
|
🔒 Subscribe | |
|
|
SWECO | KASON |
SWECO KASON SCREEN, 48 INCH DIAMETER, STAINLESS STEEL DECK, CLAMP RINGS. CAN BE SET UP AS SINGLE DECK OR DOUBLE DECK UNIT. DRIVEN BY 2.5 HP, 1155 RPM, 460 VOLT, 3/60HZ MOTOR.
|
🔒 Subscribe | |
|
|
JOHNANSING IRON WORKS | 4444-90220 |
100 GALLON CIP SKID WITH 1-TANK, JOHNANSING IRON WORKS SHELL & TUBE HEAT EXCHANGER (RATED FOR 100 PSI @ 350OF/0OF SHELL/TUBE SIDE), CHROMALOX MODEL 4444-90220 ELECTRIC HEATER WITH ADJUSTABLE CONTROLS, AND STAINLESS STEEL DIAPHRAGM CIRCULATION PUMP. LAST USED IN FOOD APPLICATION.
|
🔒 Subscribe | |
|
|
1992 | SIGMA | 40 GALLON |
1992 SIGMA 40 GALLON MIXER, 4 HP - SINGLE BLADE SIGMA MIXER, 304 STAINLESS STEEL CONTACT PARTS. CAPACITY OF 6 CUBIC FEET (40 GALLON). TROUGH MEASURES 58 INCH LONG X 20 INCH WIDE X 22 INCH IN DEPTH, TILT DISCHARGE. MIXER DRIVEN BY 4 HP MOTOR, 220 VOLTS. 2 HP TILT MOTOR. MOUNTED ON MILD STEEL FRAME. CUBIC FEET: 6, MEASUREMENTS: 58 INCH LONG X 20 INCH WIDE X 22 INCH DEEP. S/N: 92229
|
🔒 Subscribe |
|
|
COZZINI | CMT-1000 |
250 GALLON TOTAL, DUAL TANK, HIGH SHEAR MIXING SKID - THE COZZINI MODEL CMT-1000 HIGH SHEAR MIXING SKID INCLUDES TWO STAINLESS STEEL TANKS WITH CENTER TOP-MOUNTED ADMIX HIGH SHEAR MIXERS, EACH DRIVEN BY A 7.5 HP MOTOR. THE SYSTEM IS SKID-MOUNTED ON STAINLESS STEEL AND COMES WITH A MAIN CONTROL PANEL. GALLONS: 250 (ESTIMATE) - TOTAL, TYPE: DUAL TANK HIGH SHEAR MIXING SKID. LAST USED IN A FOOD PROCESSING FACILITY.
|
🔒 Subscribe | |
|
|
WESTERN STATES | PERFORATED BASKET CENTRIFUGE |
WESTERN STATES PERFORATED BASKET CENTRIFUGE, 60 INCH DIAMETER X 40 INCH HIGH, 316 STAINLESS STEEL BASKET AND CURB, 700 MAXIMUM RPM AND 655 WORKING RPM. MOTOR IS 50 HP, 1775 RPM, 3-PHASE, 60 HZ VOLTS, THRU V-BELT DRIVE WITH BACK DRIVE. UNIT ALSO HAS HEAVY DUTY 304 STAINLESS STEEL DISCHARGE HOPPER. TOP FEED THRU STAINLESS CHUTE, BOTTOM DUMP. TOP COVER RAISES HYDRAULICALLY. HEAVY DUTY DESIGN. LAST USED ON LETTUCE.
|
🔒 Subscribe | |
|
|
LABELER, PRESSURE SENSITIVE, FRONT & BACK, TOP HOLD DOWN BELT - FRONT & BACK PRESSURE SENSITIVE LABELER WITH TOP HOLD DOWN BELT, INCLUDES PASS-THRU BELT CONVEYOR WITH FRONT & BACK LABELER APPLICATORS AND SIDE WRAP BELT. STAINLESS STEEL FRAME WITH TOUCH SCREEN CONTROLLER. PREVIOUSLY USED APPLYING LABELERS TO 750 ML BOTTLES OF SPIRITS.
|
🔒 Subscribe | |||
|
|
QUADREL | VERSALINE |
QUADREL VERSALINE PRESSURE SENSITIVE WRAP AROUND LABELER, INCLUDES STAINLESS STEEL PASS-THRU BELT CONVEYOR FRAME, 5 INCH WIDE FRAME, DRIVEN BY 1/2 HP, 230/460 MOTOR THRU 28:1 RATIO REDUCER, 60 RPM (LESS BELTING). INCLUDES QUADREL MZN CONTROLLER, WORM FEED FOR BOTTLES AND 7-1/2 INCH HIGH WRAP BELT MODULE, DRIVEN BY 1/2 HP MOTOR. ALSO INCLUDES ROLL STOCK FEED SYSTEM, CAPABLE OF RUNNING UP TO APPROXIMATELY 7-1/2 INCH HIGH LABELS. PREVIOUSLY LABELING 32 OZ AND 1 GALLON ROUND BOTTLES OF FERTILIZER AT APPROXIMATELY 30 BPM. WORKING WHEN REMOVED FROM SERVICE IN DECEMBER 2021. S/N: 45452-01.02
|
🔒 Subscribe | |
|
|
KETAN | LCT-2HT |
LABELER, PRESSURE SENSITIVE, KETAN MODEL LCT-2HT WRAP AROUND PRESSURE SENSITIVE LABELER, THREE-ROLL MODULE DESIGN, MOUNTED ON HEAVY-DUTY STAINLESS STEEL FRAME WITH CASTERS. INCLUDES TOP LABELING HEADING WITH ADJUSTABLE HEIGHT LIFT. CONTAINERS ARE CONVEYED ON 6 INCH WIDE CONVEYOR WITH ADJUSTABLE RAILS AND SIDE GRIPPER BELTS AT FEED AND DISCHARGE FOR ACCURATE FLOW. SIDE BELTS ARE INDEPENDENTLY DRIVEN. ACCOMMODATES LABELS UP TO 6.5 INCH WIDE. OFFERED WITH (2) OPERATOR TOUCH SCREEN CONTROLLERS. PREVIOUSLY USED TO APPLY LABELS AT A MANUFACTURER OF SPIRITS.
|
🔒 Subscribe | |
|
|
SCREW CONVEYOR, 6 INCH X 9 FT, STAINLESS STEEL, 1 HP, INCLINE. AUGER MEASURES 6 INCH DIAMETER X 9 FT LONG WITH IS 7 INCH WIDE TROUGH, SHORT PITCH (4 INCH). SCREW IS DRIVEN BY 1 HP, 230/460V, 60 HZ, 1751 RPM MOTOR THRU GEARBOX WITH 57.42:1 RATIO. TROUGH INCLUDES 7 INCH X 7 INCH BOTTOM-END DISCHARGE WITH FLANGE CONNECTION. INCLUDES MILD STEEL FRAME WITH CASTERS. LAST USED IN FOOD WASTE CONVERSION TO ANIMAL FEED PRODUCTION SYSTEM.
|
🔒 Subscribe | |||
|
|
VERSA COUNT | 741R |
TABLET COUNTER, MODEL 741R - INCLUDES A 16 INCH DIAMETER COUNTING TABLE WITH A FEED HOPPER. POWERED BY A 115V, 2 AMP MOTOR (50/60 HZ, SINGLE-PHASE). S/N: 1614
|
🔒 Subscribe | |
|
|
TRIPAK | ST175 |
TRIPAK ST175 STAINLESS STEEL SHRINK STEAM TUNNEL WITH 9.50 INCH WIDE X 24 INCH HIGH CHAMBER OPENING. CHAMBER IS DUAL ZONE AND MEASURES 80 LONG, INCLUDING (3) ROWS OF (2) SPRAY BARS IN EACH ZONE, SPRAY BARS ARE ADJUSTABLE. TUNNEL INCLUDES TOP MOUNTED BLOWER DRIVEN BY 1 HP, 230/460 V, 3435 RPM, 3/60 HZ MOTOR. TUNNEL MODEL NUMBER ST175, SERIAL NUMBER 1-588-001-1321. OFFERED WITH 7.50 INCH WIDE BY 15.50 LONG ALL STAINLESS STEEL BELT CONVEYOR WITH BOTTOM COLLECTION PAN AND DRAIN, MODEL CONV-7.5 WIDTH, SERIAL NUMBER 1588001137. INCLUDES (2) LENZE AC TECH DIGITAL VFD CONTROLLERS (FOR BELT & TUNNEL EXHAUST), (3) STEAM CONTROL VALVES FOR EACH SIDE OF ZONE, TEMPERATURE GAUGES AND PRESSURE GAUGES. OFFERED WITH CONDENSATE TANK AND 12 HP CENTRIFUGAL CONDENSATE RETURN PUMP, TANK MEASURES 18 X 22 X 18 DEEP. PLANNED USE WAS FOR RUNNING NUT BUTTER JARS.
|
🔒 Subscribe | |
|
|
PRECISION INDUSTRIES | TMBC |
1969 PRECISION INDUSTRIES TMBC BELT CONVEYOR, 11.5 INCH X 16 FT. STAINLESS STEEL INSPECTION CONVEYOR WITH 5 INCH WIDE X 1 INCH HIGH MARINE EDGES ON EACH SIDE OF BELT. MOUNTED AT 36 INCH HIGH ON 3 SETS OF LEGS WITH CASTERS. INCLUDES UNDERMOUNTED COLLECTION PAN AND STATIONARY BRUSH AT END OF CONVEYOR WITH CRUMB COLLECTION DRAWER. DRIVEN BY 3/4 HP MOTOR WITH VARIABLE SPEED CONTROLLER, RATED FOR 120 VOLT, 60 HZ, SINGLE PHASE, 15 AMPS. INCLUDES FOOT PEDAL OPERATOR SWITCH. PREVIOUSLY USED TO CONVEY FOOD TRAYS FOR MEAL ASSEMBLIES. S/N: 62276-0689
|
🔒 Subscribe | |
|
|
BALDOR | 400 GRINDER |
MILL, DISINTEGRATOR, 6", BAR EXPORT, MODEL 400 GRINDER, 1 HP, STAINLESS STEEL - BAR EXPORT DISINTEGRATOR MILL, MODEL 400 GRINDER, ANGLE-MOUNTED, WITH 6 INCH DIAMETER GRINDING CHAMBER AND 10 INCH DIAMETER CONICAL STAINLESS STEEL FEED HOPPER REDUCING TO 3 INCH INLET. DRIVEN BY 1 HP BALDOR MOTOR, 230/460V, 3450 RPM, 3 PHASE, 60 HZ. INCLUDES CLAMPED TOP COVER, ELECTRICAL PLUG CONNECTION, AND ON/OFF TOGGLE SWITCH. MOUNTED ON STAINLESS STEEL BASE. OVERALL DIMENSIONS APPROXIMATELY 43" X 43" X 36" HIGH; WEIGHT 160 LBS.
|
🔒 Subscribe | |
|
|
2017 | COMIZ | NEW LIFE CLIP 6803 |
2017 COMIZ NEW LIFE CLIP 6803 CLIP APPLICATOR FOR PLASTIC BAGS. MANUFACTURED IN ITALY. DESIGNED FOR 5 TO 10 INCH WIDE BAGS. PREVIOUSLY USED FOR CANDY PACKAGING. EXCELLENT FOR BAG CLOSURE AUTOMATION.
|
🔒 Subscribe |
|
|
MOYNO | 5P8SJQ |
PUMP, MOYNO, 3 HP, 5 INCH, STAINLESS STEEL. MOYNO PUMP, MODEL 5P8SJQ, 5 INCH DIAMETER INLET/OUTLET. UNIT DRIVEN BY 2.2 KW (3 HP) MOTOR. MOUNTED ON STAINLESS STEEL BASE. INCLUDES SPARE STAINLESS STEEL BARREL. S/N: AS2092695-1. INLET AND OUTLET: 5 INCH INLET X 5 INCH OUTLET, CONTACT PARTS: STAINLESS STEEL. PREVIOUSLY USED IN THE PRODUCTION OF ABSORBENT MATERIALS FOR THE COSMETICS INDUSTRY.
|
🔒 Subscribe | |
|
|
MUELLER | 290 |
290 GALLON (1,100-LITER) 316L STAINLESS STEEL JACKETED TANK, FULL VACUUM RATED 30 PSI / FULL VACUUM @ 300F (29.92" HG), JACKET RATED 100 PSI @ 300F. MEASURES 48" DIAMETER X 32" STRAIGHT SIDE. FEATURES 18" TOP MANWAY WITH COVER AND 3" CENTER TOP OPENING, PLUS (1) 1", (1) 3", AND (1) 4" TRI-CLAMP TOP OPENINGS. THE 4" PORT INCLUDES AN MTS LEVEL PLUS M-SERIES MAGNETOSTRICTIVE LEVEL TRANSMITTER. SUITABLE FOR SANITARY OR PROCESS USE.
|
🔒 Subscribe | |
|
|
48 INCH DIAMETER STAINLESS STEEL COATING PAN WITH POLISHED INTERIOR. PAN IS MOUNTED ON AN ANGLED BASE WITH ENCLOSED DRIVE SYSTEM. DRIVE ASSEMBLY INCLUDES 3 HP, 1730 RPM, 230/460V, 3/60HZ GEAR MOTOR WITH 25:1 GEARBOX RATIO, OPERATING THROUGH A CHAIN AND SPROCKET ASSEMBLY. PREVIOUSLY USED FOR COATING VITAMIN GUMMIES.
|
🔒 Subscribe | |||
|
|
STAINLESS TECHNOLOGIES | ST06D040 |
450 GALLON, 316L STAINLESS STEEL, 42 INCH X 78 INCH, DT/DB, 100 PSI - INSULATED CARBON BED FILTER TANK, APPROXIMATELY 450 GALLON, 316L STAINLESS STEEL CONSTRUCTION. TANK MEASURES 42 INCH DIAMETER X 78 INCH STRAIGHT SIDE WITH DISHED TOP AND BOTTOM. UNIT HAS A SHELL THICKNESS OF 0.250 INCH, HEAD THICKNESS 0.3125 INCH. INCLUDES FOUR (4) ROWS OF SPRAY BARS TO DISPERSE PRODUCT OVER BED OF CARBON. MANUFACTURED BY STAINLESS TECHNOLOGIES, SERIAL NUMBER 6515, DWG NUMBER ST06D040. RATED FOR 100 PSI INTERNAL @ 300 DEG F. TO -20 DEG F. INCLUDES HINGED AND CLAMPED SIDE MANWAY. 3.5 INCH CENTER BOTTOM OUTLET ALONG WITH ADDITIONAL 7 INCH SIDE BOTTOM OUTLET. MOUNTED ON STAINLESS STEEL LEGS.
|
🔒 Subscribe | |
|
|
CRIVELLER | 10 BBL |
375 GALLON, 304 STAINLESS STEEL, FERMENTER, CRIVELLER, JACKETED, CONE BOTTOM - 10 BBL FERMENTER TANK WITH APPROXIMATELY 375-GALLON CAPACITY. MEASURES 4 DIAMETER X 4 STRAIGHT SIDE WITH DEEP CONE BOTTOM AND DOMED TOP. INCLUDES DIMPLE JACKET, SIDE MANWAY, TEMPERATURE GAUGE, AND MOUNTED ON ADJUSTABLE STAINLESS STEEL LEGS.
|
🔒 Subscribe | |
|
|
350 GALLON STAINLESS STEEL TANK, 2'6" X 10', DOUBLE AGITATION - STAINLESS STEEL MIX TANK, APPROXIMATELY 350-GALLON CAPACITY, MEASURES 2.5' DIAMETER X 10' HIGH, REMOVABLE DOME TOP, DISHED BOTTOM, 3" CENTER BOTTOM OUTLET, TANK IS CONSTRUCTED OF ALLOY 20CB-3 STAINLESS STEEL. UNIT IS COMPLETE WITH DOUBLE MOTION AGITATION - CENTER AGITATION AND SCRAPER-TYPE, 316 STAINLESS STEEL AGITATOR. CENTER AGITATION INCLUDES (4) 4-BLADE PADDLES ON COMMON 2" DIAMETER SHAFT, 14" DIAMETER SWING, DRIVEN BY 1-1/2 HP, 230/460 V, 1700 RPM, 3/60 HZ MOTOR THRU GEARBOX, RESULTING IN 56 OUTPUT RPM. SCRAPER AGITATION INCLUDES (16) TEFLON SCRAPERS ON (2) WIPER ARMS EXTENDING ALONG INTERIOR WALL, DRIVEN BY 3 HP, 230/460 V, 1140 RPM, 3/60 HZ MOTOR THRU GEARBOX, RESULTING IN 10 OUTPUT RPM.
|
🔒 Subscribe | |||
|
|
DIXIE | 25D-600 |
DIXIE MODEL 25D-600 DIRECT DRIVE DOUBLE CAN SEAMER, STAINLESS STEEL CONSTRUCTION, RATED FOR UP TO 15 CANS PER MINUTE. SET UP FOR 401 DIAMETER CANS. INCLUDES START AND STOP CONTROL WITH PUSH AND PULL BUTTON. DRIVEN BY 3/4 HP, 110 VOLT MOTOR. NUMBER OF SEAMING HEADS: 1, CAN DIAMETER: 401, TYPE: ATMOSPHERIC. LAST USED IN TEA GRINDING AND PACKAGING FACILITY.
|
🔒 Subscribe | |
|
|
ANRITSU | KD7405AW |
ANRITSU KD7405AW X-RAY METAL DETECTOR. MAX PRODUCT WEIGHT 5KG (60/M/MIN). MAX PRODUCT SIZE: 240MM (WIDTH) X 120MM (HEIGHT). TEMPERATURE 0 TO 35 DEGREES C. DETECTABLE CONTAMINANTS INCLUDE METAL, GLASS, STONE, HARD BONE, RUBBER, PLASTICS, AND MORE. CAN DETECT IN PACKAGED PRODUCTS AS SELL AS ALUMINUM RETORT POUCHES, ALUMINUM SEALED CONTAINERS AND ALUMINUM CANS. SYSTEM CAN ALSO DETECT MISSING PRODUCTS IN PACKED FOODS. RATED FOR 120-VOLT. S/N: 46500035207
|
🔒 Subscribe | |
|
|
CRIVELLER |
375 GALLON, 304 STAINLESS STEEL, JACKETED FERMENTER, CRIVELLER, CONE BOTTOM - USED 10 BBL CRIVELLER FERMENTER TANK WITH AN APPROXIMATE CAPACITY OF 375 GALLONS. CONSTRUCTED FROM 304 STAINLESS STEEL, THIS VESSEL FEATURES A DOMED TOP, DEEP CONE BOTTOM, 4' DIAMETER X 4' STRAIGHT SIDE, AND DIMPLE JACKET FOR INTEGRATED COOLING. INCLUDES A SIDE MANWAY, TEMPERATURE GAUGE, AND HEIGHT-ADJUSTABLE STAINLESS STEEL LEGS.
|
🔒 Subscribe | ||
|
|
BRABENDER | FARINOGRAPH/RESISTOGRAPH FA-R/2 |
BRABENDER FARINOGRAPH/RESISTOGRAPH SIGMA MIXER, TYPE FA-R/2. UNIT DESIGNED TO MEASURE THE WATER ABSORPTION OF DIFFERENT POWDERS. INCLUDES SIGMA-TYPE MIXING CHAMBER, APPROXIMATELY 1/3 GALLON CAPACITY. DESIGNED FOR 300 GRAM CAPACITY OF POWDER. INCLUDES PRINTED READOUT DEVICE. UNIT DRIVEN 1/2 HP, 63/125 RPM, 230 VOLT, 3/60 HZ MOTOR. S/N: 911359
|
🔒 Subscribe | |
|
|
IMPERIAL STEEL TANK CO. | 100 GALLON |
REACTOR, 100 GALLON, S/ST, JKT, AGIT, 25 PSI/FV - STAINLESS STEEL INSULATED REACTOR, APPROXIMATELY 100 GALLON CAPACITY. UNIT MEASURES 30" DIAMETER X 36" STRAIGHT SIDE WITH DISH BOTTOM LEADING TO 3" DIAMETER CENTER BOTTOM OUTLET. UNIT RATED FOR 25 PSI/FV AT 300 DEGREE INTERNAL; JACKET RATED FOR 150 PSI AT 300 DEGREES F. INCLUDES PADDLE AGITATION (LESS MOTOR). UNIT HAS THREE (3) 3" TOP INLETS, ONE (1) 4" TOP INLET, AND ONE (1) 2" TOP INLET. NATIONAL BOARD NUMBER 1769. PREVIOUSLY USED IN PAINT PROCESSING OPERATION AND IN GOOD CONDITION. S/N: 1.S.T - 1769
|
🔒 Subscribe | |
|
|
SWECO | SCREEN FEED FRAME |
60 INCH SWECO SCREEN FEED FRAME, S/ST - SERIES FEED FRAME FOR 60 INCH SWECO SCREENS. STAINLESS STEEL CONSTRUCTION, COMPATIBLE WITH SWECO, KASON, OR MIDWESTERN SCREENS. MEASURES 60 INCH IN DIAMETER.
|
🔒 Subscribe | |
|
|
2011 | MORFAB |
2011 MORFAB STAINLESS STEEL 190-GALLON ASME RATED PRESSURE TANK, 304 STAINLESS STEEL CONSTRUCTION, VESSEL MEASURES 24 INCH DIAMETER X 96 INCH STRAIGHT SIDE PLUS ASME DISH TOP AND BOTTOM. RATED FOR 55 PSI AT 100 DEGREES FAHRENHEIT TO MINUS 20 DEGREES FAHRENHEIT. TOP HEAD INCLUDES 8-1/2 INCH X 6 INCH OVAL HANDHOLE WITH COVER AND 2 INCH DIAMETER CENTER TOP OPENING WITH T-PIPE, INCLUDING MANUAL VALVE. BOTTOM HEAD INCLUDES 2 INCH DIAMETER CENTER BOTTOM OUTLET WITH MANUAL VALVE AND (2) 3 INCH DIAMETER FLANGED OPENINGS. MOUNTED ON LEGS, 30 INCH CLEARANCE FROM CENTER BOTTOM OUTLET, 20 INCH CLEARANCE FROM VALVE OPENING. ALSO INCLUDES 8-1/2 INCH X 6 INCH OVAL HANDHOLE ALONG SIDE BOTTOM. PREVIOUSLY USED IN FUEL CELL APPLICATION AT WASTEWATER TREATMENT FACILITY. DESIGNED USED - SULFUR COMPOUNDS REMOVAL. S/N: 14156
|
🔒 Subscribe | |
|
|
SURE SERVO | SVL-207 |
CONVEYOR, BELT, 10" X 8.5', PLASTIC, CLEATED, INDEXING - BELT CONVEYOR WITH 10" CLEATED PLASTIC BELT. PLASTIC BELT FEATURES RUBBER GRIP MATERIAL TO HOLD TRAYS OR PRODUCTS IN PLACE. CLEATS ARE 16" APART, CLEATS MEASURE 2" HIGH X 4" WIDE. 102" LONG BELT FEATURES PLASTIC SIDE RAILS AS WELL AS INFEED AND DISCHARGE STEEL GRATES. DRIVEN BY 1 HP SERVO MOTOR, 200 V, 5 AMPS, MANUFACTURED BY SURE SERVO, MODEL SVL-207. UNIT DESIGNED AS INDEXING CONVEYOR TO PACKAGE TRAYS OF FOOD PRODUCT, CAN ALSO BE USED FOR SORTING OR INSPECTION.
|
🔒 Subscribe | |
|
|
TRICLOVER |
20 HP, 4" TRICLOVER STAINLESS STEEL POSITIVE DISPLACEMENT PUMP - FEATURES APPROXIMATELY 4" DIAMETER INLET AND OUTLET WITH TRI-CLAMP FITTINGS. DRIVEN BY A 20 HP MOTOR. PREVIOUSLY USED IN FOOD WASTE CONVERSION SYSTEMS FOR PRODUCING ANIMAL FEED.
|
🔒 Subscribe | ||
|
|
MILL, DISINTEGRATOR, STAINLESS STEEL, 12 INCH DIAMETER GRINDING CHAMBER WITH 7.5 INCH DIAMETER FEED PIPE AND 2 INCH THREADED DISCHARGE. POWERED BY A 7.5 HP MOTOR (208/244V, 60 CYCLE) AND OPERATES AT 35 RPM THROUGH A GEARBOX. MOUNTED ON A MILD STEEL BASE WITH CASTERS. INCLUDES (3) RIETZ-STYLE STACKED BLADES. INCLUDES SCREEN WITH 1/8 INCH PERFORATIONS.
|
🔒 Subscribe | |||
|
|
AMPCO | LFR50-320TSC |
STAINLESS STEEL CENTRIFUGAL PUMP, 316 STAINLESS STEEL CONTACTS. DRIVEN BY 40 HP, 3530 RPM, 230/460 V, 3/60 HZ MOTOR. INCLUDES 10-INCH DIAMETER STAINLESS STEEL IMPELLER, 2-INCH DIAMETER TRI-CLAMP INLET AND 3-INCH DIAMETER TRI-CLAMP OUTLET. S/N: 177949-5-1
|
🔒 Subscribe | |
|
|
BAG SEALER, BAND SEALER, STAINLESS STEEL CONTACTS. UNIT HAS 5 INCH WIDE X 34 INCH LONG RUBBER BELT FEEDING 26 INCH LONG SEALING AREA, HORIZONTAL SEALER ONLY. COMPLETE WITH TEMPERATURE, SPEED, AND FAN CONTROLS. PREVIOUSLY USED IN NUTRACEUTICAL OPERATION.
|
🔒 Subscribe | |||
|
|
HIGHLAND EQUIPMENT LTD | EP-2B |
500 GALLON STAINLESS STEEL TANK, 6' DIAMETER, STEEP CONE BOTTOM. VESSEL MEASURES 6' DIAMETER X 16" STRAIGHT SIDE WITH DISH TOP AND STEEP CONE BOTTOM, LEADING TO 3" DIAMETER CENTER BOTTOM OUTLET WITH TRI-CLAMP CONNECTIONS. INCLUDES TWO OTHER BOTTOM PORTS WITH THREE MANUAL VALVES. SHELL THICKNESS - 10 GAUGE, HEAD THICKNESS - 10/7 GAUGE. RATED FOR 13.7 PSI INTERNALLY. MOUNTED ON (4) 4-1/2" DIAMETER STAINLESS STEEL PIPE LEGS. TOP HEAD INCLUDES THOMAS MODEL EP-2B VACUUM PUMP AND APPROXIMATELY (8) TOP OPENINGS WITH TRI-CLAMP CONNECTIONS, RANGING FROM 1" TO 3" DIAMETER. PUMP DRIVEN BY 2 HP, 230/460V, 1700/1460 RPM, 3/60HZ MOTOR. S/N: 47654
|
🔒 Subscribe | |
|
|
CRIVELLER | MLT 32, BK 21, WP 19, HLT 21 |
10 BBL CRIVELLER BREWHOUSE SYSTEM CONSTRUCTED OF 304 STAINLESS STEEL. SYSTEM INCLUDES: MASH LAUTER TUN, MODEL MLT 32, 5' DIA. X 4' STRAIGHT SIDE; BREW KETTLE, MODEL BK 21, 5' DIA. X 4.5' STRAIGHT SIDE; WHIRLPOOL, MODEL WP 19, 4' DIA. X 5' STRAIGHT SIDE; HOT LIQUOR TANK, MODEL HLT 21, 5' DIA. X 5' STRAIGHT SIDE (APPROX. 900 GALLONS). ALSO INCLUDES BREWHOUSE PLATFORM, HEAT EXCHANGER WITH TUBING, PROCESS VALVES, CONTROL PANEL, AND THREE SANITARY TRANSFER PUMPS (WORT, WHIRLPOOL, AND EBARA HOT LIQUOR PUMP RATED 1.5 HP, 50-160 L/MIN).
|
🔒 Subscribe | |
|
|
2011 | MORFAB |
2011 MORFAB STAINLESS STEEL 190-GALLON ASME RATED PRESSURE TANK, 304 STAINLESS STEEL CONSTRUCTION, VESSEL MEASURES 24 INCH DIAMETER X 96 INCH STRAIGHT SIDE PLUS ASME DISH TOP AND BOTTOM. RATED FOR 55 PSI AT 100 DEGREES FAHRENHEIT TO MINUS 20 DEGREES FAHRENHEIT. TOP HEAD INCLUDES 8-1/2 INCH X 6 INCH OVAL HANDHOLE WITH COVER AND 2 INCH DIAMETER CENTER TOP OPENING WITH T-PIPE, INCLUDING MANUAL VALVE. BOTTOM HEAD INCLUDES 2 INCH DIAMETER CENTER BOTTOM OUTLET WITH MANUAL VALVE AND (2) 3 INCH DIAMETER FLANGED OPENINGS. MOUNTED ON LEGS, 30 INCH CLEARANCE FROM CENTER BOTTOM OUTLET, 20 INCH CLEARANCE FROM VALVE OPENING. ALSO INCLUDES 8-1/2 INCH X 6 INCH OVAL HANDHOLE ALONG SIDE BOTTOM. PREVIOUSLY USED IN FUEL CELL APPLICATION AT WASTEWATER TREATMENT FACILITY. DESIGNED USED - SULFUR COMPOUNDS REMOVAL.
|
🔒 Subscribe | |
|
|
GHPD | SRU-2NLS |
GHPD SRU-2NLS POSITIVE DISPLACEMENT PUMP, 1" INLET AND OUTLET WITH 1.5" TRI-CLAMP PIPE ADAPTERS. DRIVEN BY 0.75 KW (1 HP) NORD MOTOR, 1650 RPM, 230/460V, 3-PHASE, 60 HZ, THROUGH NORD SK02-80 L/4 GEARBOX. INCLUDES HITACHI VFD WIRED FOR 110V SINGLE-PHASE INPUT. MOUNTED ON ALUMINUM CART FOR PORTABILITY WITH HANDLES AND CASTORS. INCLUDES STAINLESS DISCHARGE PIPE AND EMERGENCY STOP SWITCH. S/N: 03-4-10460A
|
🔒 Subscribe | |
|
|
2011 | MORFAB | 425-GALLON ASME |
2011 MORFAB 425-GALLON ASME RATED PRESSURE TANK, 304 STAINLESS STEEL CONSTRUCTION, VESSEL MEASURES 36 INCH DIAMETER X 96 INCH STRAIGHT SIDE PLUS ASME DISH TOP AND BOTTOM. RATED FOR 55 PSI AT 100 DEGREES FAHRENHEIT TO MINUS 20 DEGREES FAHRENHEIT. TOP HEAD INCLUDES 16 INCH X 12 INCH OVAL MANWAY WITH COVER AND 2 INCH DIAMETER CENTER TOP OPENING WITH T-PIPE, INCLUDING MANUAL VALVE. BOTTOM HEAD INCLUDES 2 INCH CENTER BOTTOM OUTLET WITH MANUAL VALVE AND (2) 3 INCH DIAMETER FLANGED OPENINGS. MOUNTED ON 57 INCH HIGH LEGS, 28 INCH CLEARANCE FROM CENTER BOTTOM OUTLET, 16 INCH CLEARANCE FROM VALVE OPENING. ALSO INCLUDES 16 INCH X 12 INCH OVAL MANWAY ALONG SIDE BOTTOM. NATIONAL BOARD NUMBER 13198. S/N: 14198
|
🔒 Subscribe |
|
|
1996 | VIRTIS | GENESIS 25 XL |
1996 VIRTIS GENESIS 25 XL FREEZE DRYER/LYPHOLIZER, 25 LITER, 316 STAINLESS STEEL CONTACTS. DRYING CHAMBER MEASURES 10-1/2 INCH WIDE X 21 INCH LONG. COMPLETE WITH (6) TRAYS MEASURING 10 INCH WIDE X 20 INCH DEEP WITH 1-1/2 INCH SIDEWALLS. UNIT HAS A TEMPERATURE RANGE FROM MINUS 58 DEGREES CELSIUS TO MINUS 70 DEGREES CELSIUS. RATED FOR 165 PSI. DESIGNED FOR USE WITH V70C REFRIGERANT. DRIVEN BY 208/230V, 1/60 HZ MOTOR. S/N: 209207
|
🔒 Subscribe |
MISC
48 INCH DIAMETER STAINLESS STEEL COATING PAN WITH 24 INCH DIAMETER FRONT OPENING, EQUIPPED WITH STAI...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
48 INCH DIAMETER STAINLESS STEEL COATING PAN WITH TEFLON BAFFLES. MOUNTED ON ANGLED BASES WITH ENCLO...
Hammer Price:
🔒
SPX / WAUKESHA 030 U2
TANKS, PUMPS & STORAGE EQUIPMENT
PUMP, POSITIVE, SPX / WAUKESHA, MODEL 030 U2, 1 HP, 1.5" IN/OUT - DUAL-STATION PUMP SYSTEM FEATURING...
Hammer Price:
🔒
MOYNO FB2F SSE 3SAA
TANKS, PUMPS & STORAGE EQUIPMENT
10 HP MOYNO PROGRESSIVE CAVITY PUMP, MODEL FB2F SSE 3SAA - CONSTRUCTED FROM STAINLESS STEEL FOR CORR...
Hammer Price:
🔒
2000 AARON PROCESS MBG200-125
MISC
2000 AARON PROCESS MBG200-125 SIGMA MIXER, 200 GALLON (26.74 CUBIC FEET) CAPACITY, ALL STAINLESS STE...
Hammer Price:
🔒
ROSS HSM 401SC2
MISC
2 HP ROSS MODEL HSM 401SC2 HIGH SHEAR INLINE MIXER, 316 STAINLESS STEEL. RATED 66 GALLON PER MINUTE ...
Hammer Price:
🔒
HKC ULTRASONIC SEPARATOR
MISC
2000 HKC ULTRASONIC SEPARATOR WITH 24 INCH DIAMETER SCREENING DECK INCLUDING DUAL DRIVE SIDE MOUNTED...
Hammer Price:
🔒
BREDDO LDDW
MISC
100-GALLON STAINLESS STEEL JACKETED MIXER, LIQUIFIER, MODEL LDDW. EQUIPPED WITH A 15 HP MOTOR, OPERA...
Hammer Price:
🔒
SCHAEFFER HS-25
FOOD PROCESSING AND RESTAURANT EQUIPMENT
200 HP DOUGH MIXER, TRIPLE BAR, SCHAEFFER MODEL HS-25, RATED FOR 2,500 POUNDS, 75 CUBIC FEET CAPACIT...
Hammer Price:
🔒
WESTFALIA SAMR-15037
CHEMICAL PROCESSING EQUIPMENT
LOT OF (2) CENTRIFUGES, DISC, AUTO, WESTFALIA, MODEL SAMR-15037, STAINLESS STEEL CONTACTS, 316 STAIN...
Hammer Price:
🔒
STRONG SCOTT 50CF
MISC
50 CF STAINLESS STEEL RIBBON MIXER, 10 HP MOTOR. TROUGH MEASURES 39 INCH WIDE X 100 INCH LONG X 40 I...
Hammer Price:
🔒
KEITH MACHINERY 3-ROLL MILL
MISC
3-ROLL MILL, 3.5 INCH X 7.5 INCH, STAINLESS STEEL, CORED ROLLS, AB CONTROLS. KEITH MACHINERY THREE-R...
Hammer Price:
🔒
SWECO KASON
MISC
SWECO KASON SCREEN, 48 INCH DIAMETER, STAINLESS STEEL DECK, CLAMP RINGS. CAN BE SET UP AS SINGLE DEC...
Hammer Price:
🔒
JOHNANSING IRON WORKS 4444-90220
TANKS, PUMPS & STORAGE EQUIPMENT
100 GALLON CIP SKID WITH 1-TANK, JOHNANSING IRON WORKS SHELL & TUBE HEAT EXCHANGER (RATED FOR 100 PS...
Hammer Price:
🔒
1992 SIGMA 40 GALLON
MISC
1992 SIGMA 40 GALLON MIXER, 4 HP - SINGLE BLADE SIGMA MIXER, 304 STAINLESS STEEL CONTACT PARTS. CAPA...
Hammer Price:
🔒
COZZINI CMT-1000
TANKS, PUMPS & STORAGE EQUIPMENT
250 GALLON TOTAL, DUAL TANK, HIGH SHEAR MIXING SKID - THE COZZINI MODEL CMT-1000 HIGH SHEAR MIXING S...
Hammer Price:
🔒
WESTERN STATES PERFORATED BASKET CENTRIFUGE
CHEMICAL PROCESSING EQUIPMENT
WESTERN STATES PERFORATED BASKET CENTRIFUGE, 60 INCH DIAMETER X 40 INCH HIGH, 316 STAINLESS STEEL BA...
Hammer Price:
🔒
PACKAGING EQUIPMENT
LABELER, PRESSURE SENSITIVE, FRONT & BACK, TOP HOLD DOWN BELT - FRONT & BACK PRESSURE SENSITIVE LABE...
Hammer Price:
🔒
QUADREL VERSALINE
PACKAGING EQUIPMENT
QUADREL VERSALINE PRESSURE SENSITIVE WRAP AROUND LABELER, INCLUDES STAINLESS STEEL PASS-THRU BELT CO...
Hammer Price:
🔒
KETAN LCT-2HT
PACKAGING EQUIPMENT
LABELER, PRESSURE SENSITIVE, KETAN MODEL LCT-2HT WRAP AROUND PRESSURE SENSITIVE LABELER, THREE-ROLL ...
Hammer Price:
🔒
MISC
SCREW CONVEYOR, 6 INCH X 9 FT, STAINLESS STEEL, 1 HP, INCLINE. AUGER MEASURES 6 INCH DIAMETER X 9 FT...
Hammer Price:
🔒
VERSA COUNT 741R
PACKAGING EQUIPMENT
TABLET COUNTER, MODEL 741R - INCLUDES A 16 INCH DIAMETER COUNTING TABLE WITH A FEED HOPPER. POWERED ...
Hammer Price:
🔒
TRIPAK ST175
PACKAGING EQUIPMENT
TRIPAK ST175 STAINLESS STEEL SHRINK STEAM TUNNEL WITH 9.50 INCH WIDE X 24 INCH HIGH CHAMBER OPENING....
Hammer Price:
🔒
PRECISION INDUSTRIES TMBC
MISC
1969 PRECISION INDUSTRIES TMBC BELT CONVEYOR, 11.5 INCH X 16 FT. STAINLESS STEEL INSPECTION CONVEYOR...
Hammer Price:
🔒
BALDOR 400 GRINDER
MISC
MILL, DISINTEGRATOR, 6", BAR EXPORT, MODEL 400 GRINDER, 1 HP, STAINLESS STEEL - BAR EXPORT DISINTEGR...
Hammer Price:
🔒
2017 COMIZ NEW LIFE CLIP 6803
PACKAGING EQUIPMENT
2017 COMIZ NEW LIFE CLIP 6803 CLIP APPLICATOR FOR PLASTIC BAGS. MANUFACTURED IN ITALY. DESIGNED FOR ...
Hammer Price:
🔒
MOYNO 5P8SJQ
TANKS, PUMPS & STORAGE EQUIPMENT
PUMP, MOYNO, 3 HP, 5 INCH, STAINLESS STEEL. MOYNO PUMP, MODEL 5P8SJQ, 5 INCH DIAMETER INLET/OUTLET. ...
Hammer Price:
🔒
MUELLER 290
TANKS, PUMPS & STORAGE EQUIPMENT
290 GALLON (1,100-LITER) 316L STAINLESS STEEL JACKETED TANK, FULL VACUUM RATED 30 PSI / FULL VACUUM ...
Hammer Price:
🔒
MISC
48 INCH DIAMETER STAINLESS STEEL COATING PAN WITH POLISHED INTERIOR. PAN IS MOUNTED ON AN ANGLED BAS...
Hammer Price:
🔒
STAINLESS TECHNOLOGIES ST06D040
TANKS, PUMPS & STORAGE EQUIPMENT
450 GALLON, 316L STAINLESS STEEL, 42 INCH X 78 INCH, DT/DB, 100 PSI - INSULATED CARBON BED FILTER TA...
Hammer Price:
🔒
CRIVELLER 10 BBL
TANKS, PUMPS & STORAGE EQUIPMENT
375 GALLON, 304 STAINLESS STEEL, FERMENTER, CRIVELLER, JACKETED, CONE BOTTOM - 10 BBL FERMENTER TANK...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
350 GALLON STAINLESS STEEL TANK, 2'6" X 10', DOUBLE AGITATION - STAINLESS STEEL MIX TANK, APPROXIMAT...
Hammer Price:
🔒
DIXIE 25D-600
PACKAGING EQUIPMENT
DIXIE MODEL 25D-600 DIRECT DRIVE DOUBLE CAN SEAMER, STAINLESS STEEL CONSTRUCTION, RATED FOR UP TO 15...
Hammer Price:
🔒
ANRITSU KD7405AW
MISC
ANRITSU KD7405AW X-RAY METAL DETECTOR. MAX PRODUCT WEIGHT 5KG (60/M/MIN). MAX PRODUCT SIZE: 240MM (W...
Hammer Price:
🔒
CRIVELLER
TANKS, PUMPS & STORAGE EQUIPMENT
375 GALLON, 304 STAINLESS STEEL, JACKETED FERMENTER, CRIVELLER, CONE BOTTOM - USED 10 BBL CRIVELLER ...
Hammer Price:
🔒
BRABENDER FARINOGRAPH/RESISTOGRAPH FA-R/2
MISC
BRABENDER FARINOGRAPH/RESISTOGRAPH SIGMA MIXER, TYPE FA-R/2. UNIT DESIGNED TO MEASURE THE WATER ABSO...
Hammer Price:
🔒
IMPERIAL STEEL TANK CO. 100 GALLON
TANKS, PUMPS & STORAGE EQUIPMENT
REACTOR, 100 GALLON, S/ST, JKT, AGIT, 25 PSI/FV - STAINLESS STEEL INSULATED REACTOR, APPROXIMATELY 1...
Hammer Price:
🔒
SWECO SCREEN FEED FRAME
MISC
60 INCH SWECO SCREEN FEED FRAME, S/ST - SERIES FEED FRAME FOR 60 INCH SWECO SCREENS. STAINLESS STEEL...
Hammer Price:
🔒
2011 MORFAB
TANKS, PUMPS & STORAGE EQUIPMENT
2011 MORFAB STAINLESS STEEL 190-GALLON ASME RATED PRESSURE TANK, 304 STAINLESS STEEL CONSTRUCTION, V...
Hammer Price:
🔒
SURE SERVO SVL-207
PACKAGING EQUIPMENT
CONVEYOR, BELT, 10" X 8.5', PLASTIC, CLEATED, INDEXING - BELT CONVEYOR WITH 10" CLEATED PLASTIC BELT...
Hammer Price:
🔒
TRICLOVER
TANKS, PUMPS & STORAGE EQUIPMENT
20 HP, 4" TRICLOVER STAINLESS STEEL POSITIVE DISPLACEMENT PUMP - FEATURES APPROXIMATELY 4" DIAMETER ...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
MILL, DISINTEGRATOR, STAINLESS STEEL, 12 INCH DIAMETER GRINDING CHAMBER WITH 7.5 INCH DIAMETER FEED ...
Hammer Price:
🔒
AMPCO LFR50-320TSC
TANKS, PUMPS & STORAGE EQUIPMENT
STAINLESS STEEL CENTRIFUGAL PUMP, 316 STAINLESS STEEL CONTACTS. DRIVEN BY 40 HP, 3530 RPM, 230/460 V...
Hammer Price:
🔒
PACKAGING EQUIPMENT
BAG SEALER, BAND SEALER, STAINLESS STEEL CONTACTS. UNIT HAS 5 INCH WIDE X 34 INCH LONG RUBBER BELT F...
Hammer Price:
🔒
HIGHLAND EQUIPMENT LTD EP-2B
TANKS, PUMPS & STORAGE EQUIPMENT
500 GALLON STAINLESS STEEL TANK, 6' DIAMETER, STEEP CONE BOTTOM. VESSEL MEASURES 6' DIAMETER X 16" S...
Hammer Price:
🔒
CRIVELLER MLT 32, BK 21, WP 19, HLT 21
WINERY AND BREWERY EQUIPMENT
10 BBL CRIVELLER BREWHOUSE SYSTEM CONSTRUCTED OF 304 STAINLESS STEEL. SYSTEM INCLUDES: MASH LAUTER T...
Hammer Price:
🔒
2011 MORFAB
TANKS, PUMPS & STORAGE EQUIPMENT
2011 MORFAB STAINLESS STEEL 190-GALLON ASME RATED PRESSURE TANK, 304 STAINLESS STEEL CONSTRUCTION, V...
Hammer Price:
🔒
GHPD SRU-2NLS
TANKS, PUMPS & STORAGE EQUIPMENT
GHPD SRU-2NLS POSITIVE DISPLACEMENT PUMP, 1" INLET AND OUTLET WITH 1.5" TRI-CLAMP PIPE ADAPTERS. DRI...
Hammer Price:
🔒
2011 MORFAB 425-GALLON ASME
TANKS, PUMPS & STORAGE EQUIPMENT
2011 MORFAB 425-GALLON ASME RATED PRESSURE TANK, 304 STAINLESS STEEL CONSTRUCTION, VESSEL MEASURES 3...
Hammer Price:
🔒
1996 VIRTIS GENESIS 25 XL
PHARMACEUTICAL MANUFACTURING EQUIPMENT
1996 VIRTIS GENESIS 25 XL FREEZE DRYER/LYPHOLIZER, 25 LITER, 316 STAINLESS STEEL CONTACTS. DRYING CH...
Hammer Price:
🔒