PLANT CLOSURE Production Facility
Category: TANKS, PUMPS & STORAGE EQUIPMENT
Total Lots:
123
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
1971 |
1971 VERTICAL TANK IN STAINLESS STEEL 316L, CAPACITY 390 M3; MEASURES APPROXIMATELY 7 M DIAMETER X 8 M HEIGHT. DESIGN PRESSURE 1.002 KG; DESIGN TEMPERATURE 127 C. / TANQUE VERTICAL EN ACERO INOXIDABLE 316L, CAPACIDAD 390 M3; MEDIDAS APROXIMADAS 7 M DE DIAMETRO X 8 M DE ALTURA. PRESION DE DISENO 1.002 KG; TEMPERATURA DE DISENO 127 C, ANO 1971.
|
🔒 Subscribe | ||
|
|
1971 |
1971 VERTICAL TANK IN STAINLESS STEEL 316L, CAPACITY 390 M3; MEASURES APPROXIMATELY 7 M DIAMETER X 8 M HEIGHT. DESIGN PRESSURE 1.002 KG; DESIGN TEMPERATURE 127 C. / TANQUE VERTICAL EN ACERO INOXIDABLE 316L, CAPACIDAD 390 M3; MEDIDAS APROXIMADAS 7 M DE DIAMETRO X 8 M DE ALTURA. PRESION DE DISENO 1.002 KG; TEMPERATURA DE DISENO 127 C.
|
🔒 Subscribe | ||
|
|
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L ; CAPACITY 55.3M3; DESIGN PRESSURE 19.0KG/CM2; DESIGN TEMPERATURE 200C; THICKNESS 38.1 MM (1.5"); IT HAS AN AGITATOR DRIVEN BY A 100 HP ELECTRIC MOTOR, WORKS AT AN AVERAGE OF 95C, AT A PRESSURE OF 9 AND 10 KG/CM2; IT HAS A FLOW DISTRIBUTION SCREEN. (SUBJECT TO CONFIRMATION) / REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 55.3M3; PRESION DE DISENO 19.0KG/CM2; TEMPERATURA DE DISENO 200C; ESPESOR 38.1 MM (1.5"); CUENTA CON AGITADOR MOVIDO POR MOTOR ELECTRICO DE 100 HP, TRABAJA EN PROMEDIO A 95C, A UNA PRESION DE 9 Y 10 KG/CM2; CUENTA CON MAMPARA DE DISTRIBUCION DE FLUJO.(SUJETO A CONFIRMACION)
|
🔒 Subscribe | |||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH. REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 36 M3; PRESION DE DISENO 11.14KG/M2; TEMPERATURA DE DISENO 175C; ESPESOR 0.875; CUENTA CON AGITADOR TIPO TURBINA MOVIDA POR MOTOR ELECTRICO DE 75 HP A 1785 RPM, MODELO A17954, CUENTA CON 3 DISTRIBUIDORES CIRCULARES CONCENTRICOS LOCALIZADOS EN EL FONDO DEL MISMO, A TRAVES DE ORIFICIOS DE 3MM DE DIAMETRO, PRESION DE OPERACION CON 10.8 KG/CM2 Y TEMPERATURA DE 168 C; SISTEMA DE SELLOS DE AGITADOR ES CON AGUA DE ALTA PRESION; CUENTA CON MAMPARA PARA DISTRIBUCION DE FLUJO; MEDIDAS APROXIMADAS 3.5 METROS DE DIAMETRO INTERNO X 3.7 METROS DE ALTURA.
|
🔒 Subscribe | ||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH. REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 36 M3; PRESION DE DISENO 11.14KG/M2; TEMPERATURA DE DISENO 175C; ESPESOR 0.875; CUENTA CON AGITADOR TIPO TURBINA MOVIDA POR MOTOR ELECTRICO DE 75 HP A 1785 RPM, MODELO A17954, CUENTA CON 3 DISTRIBUIDORES CIRCULARES CONCENTRICOS LOCALIZADOS EN EL FONDO DEL MISMO, A TRAVES DE ORIFICIOS DE 3MM DE DIAMETRO, PRESION DE OPERACION CON 10.8 KG/CM2 Y TEMPERATURA DE 168 C; SISTEMA DE SELLOS DE AGITADOR ES CON AGUA DE ALTA PRESION; CUENTA CON MAMPARA PARA DISTRIBUCION DE FLUJO; MEDIDAS APROXIMADAS 3.5 METROS DE DIAMETRO INTERNO X 3.7 METROS DE ALTURA.
|
🔒 Subscribe | ||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH. REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 36 M3; PRESION DE DISENO 11.14KG/M2; TEMPERATURA DE DISENO 175C; ESPESOR 0.875; CUENTA CON AGITADOR TIPO TURBINA MOVIDA POR MOTOR ELECTRICO DE 75 HP A 1785 RPM, MODELO A17954, CUENTA CON 3 DISTRIBUIDORES CIRCULARES CONCENTRICOS LOCALIZADOS EN EL FONDO DEL MISMO, A TRAVES DE ORIFICIOS DE 3MM DE DIAMETRO, PRESION DE OPERACION CON 10.8 KG/CM2 Y TEMPERATURA DE 168 C; SISTEMA DE SELLOS DE AGITADOR ES CON AGUA DE ALTA PRESION; CUENTA CON MAMPARA PARA DISTRIBUCION DE FLUJO; MEDIDAS APROXIMADAS 3.5 METROS DE DIAMETRO INTERNO X 3.7 METROS DE ALTURA.
|
🔒 Subscribe | ||
|
|
VERTICAL TYPE REACTOR IN 316L STAINLESS STEEL; CAPACITY 55.3M3; DESIGN PRESSURE 19.0KG/CM2; DESIGN TEMPERATURE 200C; THICKNESS 38.1 MM (1.5"); IT HAS AN AGITATOR DRIVEN BY A 100 HP ELECTRIC MOTOR, WORKS AT AN AVERAGE OF 95C, AT A PRESSURE OF 9 AND 10 KG/CM2; IT HAS A FLOW DISTRIBUTION SCREEN. / REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 55.3M3; PRESION DE DISENO 19.0KG/CM2; TEMPERATURA DE DISENO 200C; ESPESOR 38.1 MM (1.5"); CUENTA CON AGITADOR MOVIDO POR MOTOR ELECTRICO DE 100 HP, TRABAJA EN PROMEDIO A 95C, A UNA PRESION DE 9 Y 10 KG/CM2; CUENTA CON MAMPARA DE DISTRIBUCION DE FLUJO.
|
🔒 Subscribe | |||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH. (SUBJECTO TO CONFIRMATION) / REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 36 M3; PRESION DE DISENO 11.14KG/M2; TEMPERATURA DE DISENO 175C; ESPESOR 0.875"; CUENTA CON AGITADOR TIPO TURBINA MOVIDA POR MOTOR ELECTRICO DE 75 HP A 1785 RPM, MODELO A17954, CUENTA CON 3 DISTRIBUIDORES CIRCULARES CONCENTRICOS LOCALIZADOS EN EL FONDO DEL MISMO, A TRAVES DE ORIFICIOS DE 3MM DE DIAMETRO, PRESION DE OPERACION CON 10.8 KG/CM2 Y TEMPERATURA DE 168 C; SISTEMA DE SELLOS DE AGITADOR ES CON AGUA DE ALTA PRESION; CUENTA CON MAMPARA PARA DISTRIBUCION DE FLUJO; MEDIDAS APROXIMADAS 3.5 METROS DE DIAMETRO INTERNO X 3.7 METROS DE ALTURA.(SUJETO A CONFIRMACION)
|
🔒 Subscribe | ||
|
|
STAINLESS STEEL HORIZONTAL TYPE SEPARATOR SA 240 316L; SHELL DESIGN PRESSURE 13.75KG/CM2; DESIGN TEMPERATURE 200C; THICKNESS 1.0. SEPARADOR TIPO HORIZONTAL EN ACERO INOXIDABLE SA 240 316L; PRESION DE DISENO CORAZA 13.75KG/CM2; TEMPERATURA DE DISENO 200C; ESPESOR 1.0
|
🔒 Subscribe | |||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH.(SUBJECT TO CONFIRMATION) / REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 36 M3; PRESION DE DISENO 11.14KG/M2; TEMPERATURA DE DISENO 175C; ESPESOR 0.875"; CUENTA CON AGITADOR TIPO TURBINA MOVIDA POR MOTOR ELECTRICO DE 75 HP A 1785 RPM, MODELO A17954, CUENTA CON 3 DISTRIBUIDORES CIRCULARES CONCENTRICOS LOCALIZADOS EN EL FONDO DEL MISMO, A TRAVES DE ORIFICIOS DE 3MM DE DIAMETRO, PRESION DE OPERACION CON 10.8 KG/CM2 Y TEMPERATURA DE 168 C; SISTEMA DE SELLOS DE AGITADOR ES CON AGUA DE ALTA PRESION; CUENTA CON MAMPARA PARA DISTRIBUCION DE FLUJO; MEDIDAS APROXIMADAS 3.5 METROS DE DIAMETRO INTERNO X 3.7 METROS DE ALTURA.(SUJETO A CONFIRMACION)
|
🔒 Subscribe | ||
|
|
A17954 |
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR MOVED BY 75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10. 8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH. / REACTOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; CAPACIDAD 36 M3; PRESION DE DISENO 11.14KG/M2; TEMPERATURA DE DISENO 175C; ESPESOR 0.875"; CUENTA CON AGITADOR TIPO TURBINA MOVIDA POR MOTOR ELECTRICO DE 75 HP A 1785 RPM, MODELO A17954, CUENTA CON 3 DISTRIBUIDORES CIRCULARES CONCENTRICOS LOCALIZADOS EN EL FONDO DEL MISMO, A TRAVES DE ORIFICIOS DE 3MM DE DIAMETRO, PRESION DE OPERACION CON 10.8 KG/CM2 Y TEMPERATURA DE 168 C; SISTEMA DE SELLOS DE AGITADOR ES CON AGUA DE ALTA PRESION; CUENTA CON MAMPARA PARA DISTRIBUCION DE FLUJO; MEDIDAS APROXIMADAS 3.5 METROS DE DIAMETRO INTERNO X 3.7 METROS DE ALTURA.
|
🔒 Subscribe | ||
|
|
2014 | AFL |
2014 STAINLESS STEEL HEAT EXCHANGER 316L ; DESIGN PRESSURE COVERED 24.85KG/CM2; DESIGN TEMPERATURE 200C, PLATE THICKNESS 0.625, NUMBER OF TUBES 804 OF 1.0 OUTSIDE DIAMETER; TUBE SIDE 16.35KG/CM2; TYPE AFL; SERIES 40845, CLASS R. INTERCAMBIADOR DE CALOR EN ACERO INOXIDABLE 316L; PRESION DE DISENO CUBIERTA 24.85KG/CM2; TEMPERATURA DE DISENO 200C, ANO 2014; ESPESOR DE PLACA 0.625, NUMERO DE TUBOS 804 DE 1.0" DE DIAMETRO EXTERNO; LADO TUBOS 16.35KG/CM2; TIPO AFL; SERIE 40845, CLASE R.
|
🔒 Subscribe | |
|
|
2014 |
HORIZONTAL TYPE SEPARATOR IN STAINLESS STEEL 316L; DESIGN PRESSURE 21.0KG/CM2; DESIGN TEMPERATURE 200C; THICKNESS .875 ; S/N: 30368. SEPARADOR TIPO HORIZONTAL EN ACERO INOXIDABLE 316L; PRESION DE DISENO 21.0KG/CM2; TEMPERATURA DE DISENO 200C; ESPESOR .875
|
🔒 Subscribe | ||
|
|
2014 | AFL |
2014 STAINLESS STEEL HEAT EXCHANGER 316L; DESIGN PRESSURE COVERED 24.85KG/CM2; DESIGN TEMPERATURE 200C; PLATE THICKNESS 0.625, NUMBER OF TUBES 804 OF 1.0 OUTSIDE DIAMETER; TUBE SIDE 16.35KG/CM2; TYPE AFL; SERIES 40845, CLASS R. INTERCAMBIADOR DE CALOR EN ACERO INOXIDABLE 316L; PRESION DE DISENO CUBIERTA 24.85KG/CM2; TEMPERATURA DE DISENO 200C; ESPESOR DE PLACA 0.625, NUMERO DE TUBOS 804 DE 1.0" DE DIAMETRO EXTERNO; LADO TUBOS 16.35KG/CM2; TIPO AFL; SERIE 40845, CLASE R.
|
🔒 Subscribe | |
|
|
AIR COMPRESSOR OF 4 STEPS OF 1 TURBINE MOVED BY STEAM OF HIGH PRESSURE OF 32 KG/CM2 RAISES PRESSURE UP TO 10.5 KG/CM2, HAS 3 INTERCOOLERS, HAS FILTER FOR PARTICLES SUSPENDED IN THE AIR (S-531) IN DISCHARGE; HAS SEPARATOR TO ELIMINATE HUMIDITY OF THE AIR (S-527), PLUS LUBRICATION SYSTEM WITH TWO PUMPS, CAPACITY OF 9387KG/CM2, CONTROL BOARD, FILTERS. / COMPRESOR DE AIRE DE 4 PASOS DE 1 TURBINA MOVIDA POR VAPOR DE ALTA PRESION DE32 KG/CM2 LEVANTA PRESION HASTA 10.5 KG/CM2, CUENTA CON 3 INTERENFRIADORES, CUENTA CON FILTRO PARA PARTICULAS SUSPENDIDAS EN EL AIRE (S-531) EN DESCARGA; CUENTA CON SEPARADOR PARA ELIMINAR HUMEDAD DEL AIRE (S-527), MAS SISTEMA DE LUBRICACION CON DOS BOMBAS, CAPACIDAD DE 9387KG/CM2, TABLERO DE CONTROL, FILTROS.
|
🔒 Subscribe | |||
|
|
2014 | AFL |
2014 STAINLESS STEEL HEAT EXCHANGER 316L; DESIGN PRESSURE COVERED 24.85KG/CM2; DESIGN TEMPERATURE 200C, PLATE THICKNESS 0.625, NUMBER OF TUBES 804 OF 1.0 OUTSIDE DIAMETER; TUBE SIDE 16.35KG/CM2; TYPE AFL; SERIES 40845, CLASS R. INTERCAMBIADOR DE CALOR EN ACERO INOXIDABLE 316L; PRESION DE DISENO CUBIERTA 24.85KG/CM2; TEMPERATURA DE DISENO 200C, ANO 2014; ESPESOR DE PLACA 0.625, NUMERO DE TUBOS 804 DE 1.0" DE DIAMETRO EXTERNO; LADO TUBOS 16.35KG/CM2; TIPO AFL; SERIE 40845, CLASE R. (SUBJECT TO CONFIRMATION) (SUJETO A CONFIRMACION)
|
🔒 Subscribe | |
|
|
CARBON STEEL COLUMN EQUIPPED WITH 21 CARBON STEEL SIEV TYPE PLATES AND MEDIUM HEATING REBOILER FOR MEDIUM PRESSURE STEAM; 1.676 METERS OF INTERNAL DIAMETER X 14.4 METERS HIGH; PRESSURE IN DOME 3.5 KG/CM2; AT THE BOTTOM IT WORKS AT 140 C, IT HAS PRESSURE CONTROL (PIC-5E343) AND LEVEL CONTROL (LIC-5E302). / COLUMNA EN ACERO AL CARBON EQUIPADA CON 21 PLATOS TIPO SIEV DE ACERO AL CARBON Y REHERVIDOR MEDIO DE CALENTAMIENTO PARA VAPOR DE MEDIA PRESION; 1.676 METROS DE DIAMETRO INTERNO X 14.4 METROS DE ALTURA; PRESION EN DOMO 3.5 KG/CM2; EN EL FONDO TRABAJA A 140 C, CUENTA CON CONTROL DE PRESION (PIC-5E343) Y CONTROL DE NIVEL (LIC-5E302).
|
🔒 Subscribe | |||
|
|
SIEV |
CARBON STEEL COLUMN EQUIPPED WITH 21 CARBON STEEL SIEV TYPE PLATES AND MEDIUM HEATING REBOILER FOR MEDIUM PRESSURE STEAM; 1.829 METERS INSIDE DIAMETER X 13.66 METERS HIGH; DOME OPERATING PRESSURE 1.6 KG/CM2; OPERATING TEMPERATURE 110 C; BOTTOM TEMPERATURE 118 C. / COLUMNA EN ACERO AL CARBON EQUIPADA CON 21 PLATOS TIPO SIEV DE ACERO AL CARBON Y REHERVIDOR MEDIO DE CALENTAMIENTO PARA VAPOR DE MEDIA PRESION; 1.829 METROS DIAMETRO INTERIOR X 13.66 METROS DE ALTURA; PRESION DE OPERACION DOMO 1.6 KG/CM2; TEMPERATURA DE OPERACION DE 110 C; EN EL FONDO TEMPERATURA DE 118 C.
|
🔒 Subscribe | ||
|
|
DRYING COLUMN IN CARBON STEEL EQUIPPED WITH 15 SIEV TYPE CARBON STEEL PLATES AND MEDIUM HEATING REBOILER FOR MEDIUM PRESSURE STEAM; COLUMN OPERATING PRESSURE 1KG/CM2 ; 1.37M INNER DIAMETER X 11.57 M HEIGHT. / COLUMNA SECADORA EN ACERO AL CARBON EQUIPADA CON 15 PLATOS TIPO SIEV EN ACERO AL CARBON Y REHERVIDOR MEDIO DE CALENTAMIENTO PARA VAPOR DE MEDIA PRESION; PRESION DE OPERACION DE LA COLUMNA 1KG/CM2 ; 1.37M DIAMETRO INTERIOR X 11.57 M DE ALTURA.
|
🔒 Subscribe | |||
|
|
TWO-SECTION CARBON STEEL COLUMN: UPPER SECTION EQUIPPED WITH 18 CARBON STEEL SIEV TYPE PLATES; LOWER SECTION EQUIPPED WITH 5 CARBON STEEL SIEV TYPE PLATES AND 2 MEDIUM HEATING REBOILERS FOR MEDIUM PRESSURE STEAM OF 4.5 KG/CM2; DOME PRESSURE OF 1 PSI; TEMPERATURE OF 78 C; FIRST SECTION 0.91 METERS INTERNAL DIAMETER X 6.55 METERS LENGTH; SECOND SECTION 2.28 METERS INTERNAL DIAMETER X 19 METERS HEIGHT. / COLUMNA DE DOS SECCIONES EN ACERO AL CARBON: SUPERIOR EQUIPADA CON 18 PLATO TIPO SIEV DE ACERO AL CARBON; INFERIOR EQUIPADA CON 5 PLATOS TIPO SIEV DE ACERO AL CARBON Y 2 REHERVIDOR MEDIO DE CALENTAMIENTO PARA VAPOR DE MEDIA PRESION DE 4.5 KG/CM2; PRESION EN DOMO DE 1 PSI; TEMPERATURA DE 78 C; PRIMERA SECCION 0.91 METROS DE DIAMETRO INTERNO X 6.55 METROS DE LONGITUD; SEGUNDA SECCION 2.28 METROS DE DIAMETRO INTERNO X 19 METROS DE ALTURA.
|
🔒 Subscribe | |||
|
|
EXTRACTOR COLUMN IN CARBON STEEL PACKED WITH 900' OF 1/12" PALL RINGS, MEASURES: 2.0 M INTERNAL DIAMETER X 8 M HEIGHT.
|
🔒 Subscribe | |||
|
|
VERTICAL TYPE REACTOR IN CARBON STEEL OF 2.5 METERS OF INTERNAL DIAMETER X 3.75 METERS OF HEIGHT; IT CONSISTS OF A CALANDRIA OF 1310 TUBES, WITH A LENGTH OF 4877 MM; INTERNAL DIAMETER OF 45.3 MM. REACTOR TIPO VERTICAL EN ACERO AL CARBON DE 2.5 METROS DE DIAMETRO INTERNO X 3.75 METROS DE ALTURA; CONSTA DE UNA CALANDRIA DE 1310 TUBOS, CON UNA LONGITUD DE 4877 MM; DIAMETRO INTERNO DE 45.3 MM.
|
🔒 Subscribe | |||
|
|
SMITHCO | T36-121-2 |
SMITHCO CHILLER, MODEL T36-121-2, SERIES 06B601 B, FORCED DRAFT WITH 2 ELECTRIC MOTORS OF 25 HP AT 1775 RPM, STAINLESS STEEL TUBES. CHILLER MARCA SMITHCO, MODELO T36-121-2, SERIE 06B601 B, TIRO FORZADO CON 2 MOTORES ELECTRICO DE 25 HP A 1775 RPM, TUBOS DE ACERO INOXIDABLE.
|
🔒 Subscribe | |
|
|
SEPARATOR TANK VERTICAL TYPE IN STAINLESS STEEL 316L; 3.0 METERS INTERNAL DIAMETER X 11.5 METERS HIGH; WITH 2 SECTIONS OF 2.5 METERS PACKED WITH 1 PALL RINGS; WITH CAPACITY OF 70 M3, DIVIDED IN 2 COMPARTMENTS EQUIPPED WITH PACKING BED TYPE 1 PALL RINGS OF CARBON STEEL, WITH INTERFACE TRANSMITTER (ILIC-5D301). TANQUE SEPARADOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; 3.0 METROS DIAMETRO INTERNO X 11.5 METROS DE ALTURA; CON 2 SECCIONES DE 2.5 METROS EMPACADAS CON ANILLOS PALL DE 1"; CON CAPACIDAD DE 70 M3, DIVIDIDO EN 2 COMPARTIMIENTOS EQUIPADOS CON CAMA DE EMPAQUE TIPO ANILLOS PALL DE 1" DE ACERO AL CARBON, CON TRANSMISOR DE INTERFASE (ILIC-5D301).
|
🔒 Subscribe | |||
|
|
A17954 |
75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TEMPERATURE 175C; THICKNESS 0.875; IT HAS A TURBINE TYPE AGITATOR, IT HAS 3 CONCENTRIC CIRCULAR DISTRIBUTORS LOCATED AT THE BOTTOM OF THE SAME, THROUGH HOLES OF 3MM DIAMETER, OPERATING PRESSURE WITH 10.8 KG/CM2 AND TEMPERATURE OF 168 C; STIRRER SEALS SYSTEM IS WITH HIGH PRESSURE WATER; IT HAS A BULKHEAD FOR FLOW DISTRIBUTION; MEASURES APPROXIMATELY 3.5 METERS OF INTERNAL DIAMETER X 3.7 METERS HIGH.
|
🔒 Subscribe | ||
|
|
1998 | BUFLOVAK | 1556970 |
1998 BUFLOVAK ROTARY DRYER MODEL 1556970 SERIES 18706 / SECADOR ROTATIVO MARCA BUFLOVAK MODELO 1556970 SERIE 18706 ANO 1998
|
🔒 Subscribe |
|
|
VERTICAL TYPE REACTOR IN CARBON STEEL OF 2.5 METERS OF INTERNAL DIAMETER X 3.75 METERS OF HEIGHT; IT CONSISTS OF A CALANDRIA OF 1310 TUBES, WITH A LENGTH OF 4877 MM; INTERNAL DIAMETER OF 45.3 MM.(SUBJECT TO CONFIRMATION) / REACTOR TIPO VERTICAL EN ACERO AL CARBON DE 2.5 METROS DE DIAMETRO INTERNO X 3.75 METROS DE ALTURA; CONSTA DE UNA CALANDRIA DE 1310 TUBOS, CON UNA LONGITUD DE 4877 MM; DIAMETRO INTERNO DE 45.3 MM.(SUJETO A CONFIRMACION)
|
🔒 Subscribe | |||
|
|
1971 |
1971 HEAT EXCHANGER; DESIGN PRESSURE 1.28 GK/CM2, WORKING TEMPERATURE 260C, AREA 188 M2; SHELL DIAMETER 31, NO. OF TUBES 330, TUBE DIAMETER 1, TUBE LENGTH 12', TUBE PITCHES 4.
|
🔒 Subscribe | ||
|
|
2012 |
2012 CONDENSER, PRESSURE 273 PSI; SIZE 30" BY 192'; MINIMUM TEMPERATURE 270F; WITH AN AREA OF 79.2 M3; CONDENSER, PRESSURE 273 PSI; SIZE 30 BY 192'; MINIMUM TEMPERATURE 270F; WITH AN AREA OF 79.2 M3; YEAR 2012. / CONDENSADOR, PRESION DE 273 PSI; TAMANO 30" POR 192'; TEMPERATURA MINIMA 270F; CON UN AREA DE 79.2 M3; ANO 2012.
|
🔒 Subscribe | ||
|
|
SEPARATOR TANK VERTICAL TYPE IN STAINLESS STEEL 316L; 3.0 METERS INTERNAL DIAMETER. X 11.5 METERS HIGH WITH 2 SECTIONS OF 2.5 METERS PACKED WITH 2 RASHING RINGS, WITH CAPACITY OF 80 M3, WITH INTERFACE TRANSMITTER (ILIC-5S58). TANQUE SEPARADOR TIPO VERTICAL EN ACERO INOXIDABLE 316L; 3.0 METROS DIAMETRO INTERNO. X 11.5 METROS DE ALTURA CON 2 SECCIONES DE 2.5 METROS EMPACADAS CON ANILLOS RASHING DE 2", CON CAPACIDAD DE 80 M3, CUENTA CON TRANSMISOR DE INTERFASE (ILIC-5S58).
|
🔒 Subscribe | |||
|
|
316L STAINLESS STEEL CYCLOHEXANE EXHAUSTING COLUMN PACKED WITH 1 1/2" RASHING RINGS. INTERNAL DIAMETER OF 0.9 METERS X 6.0 METERS LONG. COLUMNA AGOTADORA DE CICLOHEXANO ACERO INOXIDABLE 316L EMPACADA CON ANILLOS RASHING DE1 1/2". DIAMETRO INTERNO DE 0.9METROSX 6.0METROS DE LONGUITUD.
|
🔒 Subscribe | |||
|
|
CYCLOHEXANE DISTILLATION COLUMN EQUIPPED WITH UPPER SECTION OF STRUCTURED PACKING, LOWER SECTION WITH 3 SIEV TYPE A/C PLATES, 2.286 METERS INTERNAL DIAMETER X 10.4 METERS OF A/C LOG AND REBOILER (E-559), USES AS HEATING MEDIUM CYCLOHEXANE VAPORS FEEDING THE FIRST COLUMN (C-525), DOME PRESSURE 1.9 KG/CM2 AND TEMPERATURE 115C, / COLUMNA DESTILACION DE CICLOHEXANO EQUIPADA CON SECCION SUPERIOR DE EMPAQUE ESTRUCTURADA, SECCION INFERIOR CON 3 PLATOS TIPO SIEV DE A/C.2.286 METROS DIAMETRO INTERNO X10.4 METROS DE LOG. DE A/C. Y REHERVIDOR (E-559), UTILIZA COMO MEDIO DE CALENTAMIENTO VAPORES DE CICLOHEXANO QUE ALIMENTA LA PRIMERA COLUMNA (C-525), PRESION DE DOMO 1.9 KG./CM2 Y TEMPERATURA DE 115C
|
🔒 Subscribe | |||
|
|
COEN | DS-106/88 |
COEN NATURAL GAS STEAM GENERATOR TYPE DS-106/88, 50,000 TON/HR / GENERADOR DE VAPOR A GAS NATURAL MARCA COEN TIPO DS-106/88, 50,000 TON/HR
|
🔒 Subscribe | |
|
|
ZETRAK | 1000 KVA |
1000 KVA THREE-PHASE OIL-FILLED POWER TRANSFORMER FROM 4160 TO 480Y. TRANSFORMADOR DE POTENCIA TRIFASICO EN ACEITE MARCA ZETRAK DE 1000 KVA. DE 4160 A 480Y.
|
🔒 Subscribe | |
|
|
ANONA COLUMN HAS PLATES TYPE VALASTRAS, THE FIRST SECTION MEASURES 3.353 M INSIDE DIAMETER X 28.44 M LONG, BUILT IN CARBON STEEL, HAS REBOILER (E-550) ENVELOPE AND CARBON STEEL TUBES, 65 INSIDE DIAMETER X 8 ' LONG, 220 M2 AREA. / COLUMNA DE ANONA CUENTA CON PLATOS TIPO BALASTRAS, LA PRIMERA SECCION MIDE 3.353 M DIAMETRO INTERIOR X 28.44 M DE LONGITUD, CONSTRUIDA EN ACERO AL CARBON, TIENE REHERVIDOR (E-550) ENVOLVENTE Y TUBOS EN ACERO AL CARBON, 65" DIAMETRO INTERIOR X 8 ' DE LONGITUD, AREA DE 220 M2
|
🔒 Subscribe | |||
|
|
EVAPORATOR COLUMN IN STAINLESS STEEL 304 (THIRD EFFECT) WITH 8 PLATES INSIDE (SIEVES TYPE), 2.4M X 7.4M, IN THE LOWER PART 1 (EXCHANGER), ENVELOPE TYPE REBOILER IN CARBON STEEL, 460 TUBES IN STAINLESS STEEL 304, 45 SHELL DIAMETER X 10 FT, HEAT TRANSFER 165 M2 WITH LEVEL TRANSMITTER AND CONTROL VALVE. / COLUMNA EVAPORADORA EN ACERO INOXIDABLE 304 (TERCER EFECTO) CUENTA CON 8 PLATOS EN SU INTERIOR (TIPO SIEVES), 2.4M X 7.4M, EN PARTE INFERIOR 1 (INTERCAMBIADOR) REHERVIDOR TIPO ENVOLVENTE EN ACERO AL CARBON, 460 TUBOS EN ACERO INOX 304, 45" DIAMETRO DE CORAZA X 10 FT, TRANSFERENCIA DE CALOR 165 M2 CUENTA CON TRANSMISOR DE NIVEL Y VALVULA DE CONTROL
|
🔒 Subscribe | |||
|
|
1998 | BUFLOVAK | 1556970 |
1998 BUFLOVAK ROTARY DRYER MODEL 1556970 SERIES 18706 / SECADOR ROTATIVO MARCA BUFLOVAK MODELO 1556970 SERIE 18706 ANO 1998
|
🔒 Subscribe |
|
|
CYCLOHEXANE DISTILLATION COLUMN, UPPER SECTION EQUIPPED WITH STRUCTURED PACKING 1.5 METERS INTERNAL DIAMETER X 2.4 METERS LONG, LOWER SECTION 3.66 METERS INTERNAL DIAMETER X 12.0 METERS LONG, WITH 7 PLATES TYPE SIEV. IT HAS A REBOILER (E-531), IT USES THE CYCLOHEXANE VAPORS OF THE C-527 COLUMN AS HEATING MEDIUM, IT IS EQUIPPED WITH A SMALLER DIAMETER INNER SECTION, BOTTOM SECTION EQUIPPED WITH 5 PLATES AND REBOILER (E-532), IT USES MEDIUM PRESSURE VAPOR FOR HEATING OF 12.5 KG/CM2, IT WORKS AT 128 C WITH TEMPERATURE CONTROL (TIC-5E05), COLUMN PRESSURE 1.0 PSIG AND TEMPERATURE OF 78C. / COLUMNA DESTILACION DE CICLOHEXANO SECCION SUPERIOR EQUIPADA CON EMPAQUE ESTRUCTURADO 1.5 METROS DE DIAMETRO INTERNO X 2.4 METROS DE LONGITUD. SECCION INFERIOR 3.66 METROS DIAMETRO INTERNO X12.0 MTS DE LONGITUD. DE 7 PLATOS TIPO SIEV. CUENTA CON REHERVIDOR (E-531), UTILIZA MEDIO DE CALENTAMIENTO LOS VAPORES DE CICLOHEXANO DE LA COLUMNA C-527, ESTA EQUIPADA CON SECCION INTERIOR DE MENOR DIAMETRO, FONDO INFERIOR EQUIPADA CON 5 PLATOS Y REHERVIDOR (E-532), UTILIZA VAPOR DE MEDIA PRESION PARA CALENTAMIENTO DE 12.5 KG/CM2, TRABAJA A 128 C CON CONTROL DE TEMPERATURA (TIC-5E05), PRESION DE COLUMNA 1.0 PSI Y TEMPERATURA DE 78C.
|
🔒 Subscribe | |||
|
|
1998 | GE | GHEK-22244001 |
1998 GE ELECTRIC INDUCTION MOTOR, CAPACITY 3000 HP, 4160 V, 1780 RPM, MODEL GHEK-22244001, S/N: 980831496. / MOTOR DE INDUCCION ELECTRICO MARCA GE, CAPACIDAD 3000 HP, MODELO GHEK-22244001, NO DE SERIE 980831496, 4160 V, 1780 RPM, ANO 1998.
|
🔒 Subscribe |
|
|
1998 | GE | CHEK-22984001 |
1998 GE ELECTRIC INDUCTION MOTOR, CAPACITY 4000 HP, MODEL CHEK-22984001, 4160 V, 1780 RPM, S/N: 980831497. / MOTOR DE INDUCCION ELECTRICO MARCA GE, CAPACIDAD 4000 HP, MODELO CHEK-22984001, 4160 V, 1780 RPM, ANO 1998.
|
🔒 Subscribe |
|
|
CARBON STEEL CONDENSER; AREA 122M2, SHELL DIAMETER 39", NO. OF TUBES 432, TUBE DIAMETER 1", TUBE LENGTH 12', TUBE PITCHES 4. / CONDENSADOR EN ACERO AL CARBON; AREA 122M2, DIAMETRO DE CORAZA 39", NO. DE TUBOS 432, DIAMETRO DE TUBOS 1", LONGITUD DE TUBOS 12', PASOS POR TUBOS 4.
|
🔒 Subscribe | |||
|
|
LIGHTWEIGHT COLUMN, WITH SIEV TYPE PLATES, REBOILER (E-546) WRAPPED IN CARBON STEEL 55" X 8' LONG W - LIGHTWEIGHT COLUMN, WITH SIEV TYPE PLATES, REBOILER (E-546) WRAPPED IN CARBON STEEL 55 X 8' LONG WITH AN AREA OF 151 M2, MEASURES 1.524 M INSIDE DIAMETER X 35.5 M LONG IN CARBON STEEL. / COLUMNA DE LIGEROS, CUENTA CON PLATOS TIPO SIEV, REHERVIDOR (E-546) ENVOLVENTE EN ACERO A CARBON DE 55" X 8' DE LONGITUD CON AREA 151 M2, MEDIDAS 1.524 M DE DIAMETRO INTERIOR X 35.5 M DE LONGITUD EN ACERO AL CARBON
|
🔒 Subscribe | |||
|
|
EVAPORATOR COLUMN IN STAINLESS STEEL 304 (FIRST EFFECT) WITH 8 PLATES INSIDE (SIEVES TYPE), 1.05M X 8.5M, IN LOWER PART 1 (EXCHANGER) REBOILER ENVELOPE TYPE IN CARBON STEEL, 460 OF 1 1/2 TUBES IN STAINLESS STEEL 304, 45 SHELL DIAMETER X 10 FT HEAT TRANSFER 165 M2 WITH LEVEL TRANSMITTER AND CONTROL VALVE 4"/150 PSI. / COLUMNA EVAPORADORA EN ACERO INOXIDABLE 304 (PRIMER EFECTO) CUENTA CON 8 PLATOS EN SU INTERIOR (TIPO SIEVES), 1.05M X 8.5M, EN PARTE INFERIOR 1 (INTERCAMBIADOR) REHERVIDOR TIPO ENVOLVENTE EN ACERO AL CARBON, 460 DE 1 1/2" TUBOS EN ACERO INOXIDABLE 304, 45" DIAMETRO DE CORAZA X 10 FT TRANSFERENCIA DE CALOR 165 M2 CUENTA CON TRANSMISOR DE NIVEL Y VALVULA DE CONTROL 4"/150 PSI
|
🔒 Subscribe | |||
|
|
TEMOSA | CV620-3-213422 |
TEMOSA VIBRATING FIBER, HEAVY DUTY MODEL, SERIES CV620-3-213422, MEASURES 6 X 20 - 3; IT HAS A 30 HP ELECTRIC MOTOR. (SUBJECT TO CONFIRMATION) / CIBRA VIBRATORIA MARCA TEMOSA, MODELO SERVICIO PESADO, SERIE CV620-3-213422, MEDIDAS 6 X 20 - 3; CUENTA CON MOTOR ELECTRICO DE 30 HP. (SUJETO A CONFIRMACION)
|
🔒 Subscribe | |
|
|
STAINLESS STEEL ROTARY DRYER / SECADOR ROTATIVO EN ACERO INOXIDABLE
|
🔒 Subscribe | |||
|
|
I. RAND | 2CRVH |
1 I. RAND 15 HP CENTRIFUGAL PUMP AT 3500 RPM, MODEL 2CRVH, CLOSED IMPELLER TYPE, AMP PLATE 19, ROT MECHANICAL SEAL, SEAL DIAMETER 1 1 1/8, IMPELLER DIAMETER 6.0, LOAD 3 DISCHARGE 2; 1 I. RAND 15 HP 3500 RPM CENTRIFUGAL PUMP, MODEL 2CRVH, CLOSED IMPELLER TYPE, AMP PLATE 19, ROT MECHANICAL SEAL, SEAL DIAMETER 1 1 1/8, IMPELLER DIAMETER 6.0, LOAD 3 DISCHARGE 2. / LOTE DE 2 BOMBAS, CONTIENE: 1 BOMBA CENTRIFUGA DE 15 HP A 3500 RPM, MARCA I, RAND, MODELO 2CRVH, TIPO DE IMPULSOR CERRADO, AMP PLACA 19, SELLO MECANICO ROT, DIAMETRO DE SELLO 1 1/8", DIAMETRO DE IMPULSOR 6.0", CARGA 3" DESCARGA 2"; 1 BOMBA CENTRIFUGA DE 15 HP A 3500 RPM, MARCA I, RAND, MODELO 2CRVH, TIPO DE IMPULSOR CERRADO, AMP PLACA 19, SELLO MECANICO ROT, DIAMETRO DE SELLO 1 1/8", DIAMETRO DE IMPULSOR 6.0", CARGA 3" DESCARGA 2"
|
🔒 Subscribe | |
|
|
FLOWTEK | F30 |
FLOWTEK XPV EXTRA LARGE FLANGED SAFETY VALVE, XPV-5A404 10", MODEL F30, CLASS 300.
|
🔒 Subscribe | |
|
|
1997 |
1997 CARBON STEEL CHILLER: DESIGN PRESSURE 16.14 KG/CM2; TUBE PRESSURE 5.23KG/CM2; DESIGN TEMPERATURE 180C; TUBE DESIGN TEMPERATURE 150C; AREA 13.7 M2; SHELL DIAMETER 12; NO. OF TUBES 48; TUBE DIAMETER 1; TUBE LENGTH 12'; TUBE PITCHES 4. / ENFRIADOR EN ACERO AL CARBON: PRESION DE DISENO 16.14 KG/CM2; PRESION DE TUBOS 5.23KG/CM2; TEMPERATURA DE DISENO 180C; TEMPERATURA DE DISENO DE TUBOS 150C; AREA DE 13.7 M2; DIAMETRO DE CORAZA 12"; NO. DE TUBOS 48; DIAMETRO DE TUBOS 1"; LONGITUD DE TUBOS 12'; PASOS POR TUBOS 4.
|
🔒 Subscribe | ||
|
|
ANOL-ANONE RAW MIX STORAGE TANK, VERTICAL TYPE IN CARBON STEEL, 5.7 M INNER DIAMETER X 5.7 M LONG, WITH A CAPACITY OF 145.4 M3, WITH HIGH AND LOW LEVEL ALARMS (HLA-5H05 AND LLA-5H05). TANQUE DE ALMACENAMIENTO MEZCLA CRUDA DE ANOL-ANONA, TIPO VERTICAL EN ACERO AL CARBON 5.7 M DIAMETRO INTERIOR X 5.7M DE LONGITUD, CON CAPACIDAD DE 145.4 M3, CUENTA CON ALARMAS POR ALTO Y BAJO NIVEL (HLA-5H05 Y LLA-5H05)
|
🔒 Subscribe | |||
|
|
PETTIBONE | P&H OMEGA |
2023 PETTIBONE P&H OMEGA CRANE, 20 TON CAPACITY. NOT GUARANTEED TO WORK, PLEASE INSPECT. / GRUA MARCA PETTIBONE, MODELO P&H OMEGA, SIN SERIE, ANO , 20 TONELADAS DE CAPACIDAD. NO SE ASEGURA SU FUNCIONAMIENTO, FAVOR DE INSPECCIONAR
|
🔒 Subscribe |
1971
TANKS, PUMPS & STORAGE EQUIPMENT
1971 VERTICAL TANK IN STAINLESS STEEL 316L, CAPACITY 390 M3; MEASURES APPROXIMATELY 7 M DIAMETER X 8...
Hammer Price:
🔒
1971
TANKS, PUMPS & STORAGE EQUIPMENT
1971 VERTICAL TANK IN STAINLESS STEEL 316L, CAPACITY 390 M3; MEASURES APPROXIMATELY 7 M DIAMETER X 8...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L ; CAPACITY 55.3M3; DESIGN PRESSURE 19.0KG/CM2; DESIGN ...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN 316L STAINLESS STEEL; CAPACITY 55.3M3; DESIGN PRESSURE 19.0KG/CM2; DESIGN T...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
STAINLESS STEEL HORIZONTAL TYPE SEPARATOR SA 240 316L; SHELL DESIGN PRESSURE 13.75KG/CM2; DESIGN TEM...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPACITY 36 M3; DESIGN PRESSURE 11.14KG/M2; DESIGN TE...
Hammer Price:
🔒
2014 AFL
CHEMICAL PROCESSING EQUIPMENT
2014 STAINLESS STEEL HEAT EXCHANGER 316L ; DESIGN PRESSURE COVERED 24.85KG/CM2; DESIGN TEMPERATURE 2...
Hammer Price:
🔒
2014
TANKS, PUMPS & STORAGE EQUIPMENT
HORIZONTAL TYPE SEPARATOR IN STAINLESS STEEL 316L; DESIGN PRESSURE 21.0KG/CM2; DESIGN TEMPERATURE 20...
Hammer Price:
🔒
2014 AFL
INDUSTRIAL AND COOLING HEATING EQUIPMENT
2014 STAINLESS STEEL HEAT EXCHANGER 316L; DESIGN PRESSURE COVERED 24.85KG/CM2; DESIGN TEMPERATURE 20...
Hammer Price:
🔒
AIR COMPRESSORS
AIR COMPRESSOR OF 4 STEPS OF 1 TURBINE MOVED BY STEAM OF HIGH PRESSURE OF 32 KG/CM2 RAISES PRESSURE ...
Hammer Price:
🔒
2014 AFL
CHEMICAL PROCESSING EQUIPMENT
2014 STAINLESS STEEL HEAT EXCHANGER 316L; DESIGN PRESSURE COVERED 24.85KG/CM2; DESIGN TEMPERATURE 20...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
CARBON STEEL COLUMN EQUIPPED WITH 21 CARBON STEEL SIEV TYPE PLATES AND MEDIUM HEATING REBOILER FOR M...
Hammer Price:
🔒
SIEV
CHEMICAL PROCESSING EQUIPMENT
CARBON STEEL COLUMN EQUIPPED WITH 21 CARBON STEEL SIEV TYPE PLATES AND MEDIUM HEATING REBOILER FOR M...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
DRYING COLUMN IN CARBON STEEL EQUIPPED WITH 15 SIEV TYPE CARBON STEEL PLATES AND MEDIUM HEATING REBO...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
TWO-SECTION CARBON STEEL COLUMN: UPPER SECTION EQUIPPED WITH 18 CARBON STEEL SIEV TYPE PLATES; LOWER...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
EXTRACTOR COLUMN IN CARBON STEEL PACKED WITH 900' OF 1/12" PALL RINGS, MEASURES: 2.0 M INTERNAL DIAM...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN CARBON STEEL OF 2.5 METERS OF INTERNAL DIAMETER X 3.75 METERS OF HEIGHT; IT...
Hammer Price:
🔒
SMITHCO T36-121-2
INDUSTRIAL AND COOLING HEATING EQUIPMENT
SMITHCO CHILLER, MODEL T36-121-2, SERIES 06B601 B, FORCED DRAFT WITH 2 ELECTRIC MOTORS OF 25 HP AT 1...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
SEPARATOR TANK VERTICAL TYPE IN STAINLESS STEEL 316L; 3.0 METERS INTERNAL DIAMETER X 11.5 METERS HIG...
Hammer Price:
🔒
A17954
CHEMICAL PROCESSING EQUIPMENT
75 HP ELECTRIC MOTOR AT 1785 RPM, MODEL A17954, VERTICAL TYPE REACTOR IN STAINLESS STEEL 316L; CAPAC...
Hammer Price:
🔒
1998 BUFLOVAK 1556970
CHEMICAL PROCESSING EQUIPMENT
1998 BUFLOVAK ROTARY DRYER MODEL 1556970 SERIES 18706 / SECADOR ROTATIVO MARCA BUFLOVAK MODELO 15569...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
VERTICAL TYPE REACTOR IN CARBON STEEL OF 2.5 METERS OF INTERNAL DIAMETER X 3.75 METERS OF HEIGHT; IT...
Hammer Price:
🔒
1971
INDUSTRIAL AND COOLING HEATING EQUIPMENT
1971 HEAT EXCHANGER; DESIGN PRESSURE 1.28 GK/CM2, WORKING TEMPERATURE 260C, AREA 188 M2; SHELL DIAME...
Hammer Price:
🔒
2012
INDUSTRIAL AND COOLING HEATING EQUIPMENT
2012 CONDENSER, PRESSURE 273 PSI; SIZE 30" BY 192'; MINIMUM TEMPERATURE 270F; WITH AN AREA OF 79.2 M...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
SEPARATOR TANK VERTICAL TYPE IN STAINLESS STEEL 316L; 3.0 METERS INTERNAL DIAMETER. X 11.5 METERS HI...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
316L STAINLESS STEEL CYCLOHEXANE EXHAUSTING COLUMN PACKED WITH 1 1/2" RASHING RINGS. INTERNAL DIAMET...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
CYCLOHEXANE DISTILLATION COLUMN EQUIPPED WITH UPPER SECTION OF STRUCTURED PACKING, LOWER SECTION WIT...
Hammer Price:
🔒
COEN DS-106/88
ELECTRICAL AND POWER GENERATION EQUIPMENT
COEN NATURAL GAS STEAM GENERATOR TYPE DS-106/88, 50,000 TON/HR / GENERADOR DE VAPOR A GAS NATURAL MA...
Hammer Price:
🔒
ZETRAK 1000 KVA
ELECTRICAL AND POWER GENERATION EQUIPMENT
1000 KVA THREE-PHASE OIL-FILLED POWER TRANSFORMER FROM 4160 TO 480Y. TRANSFORMADOR DE POTENCIA TRIFA...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
ANONA COLUMN HAS PLATES TYPE VALASTRAS, THE FIRST SECTION MEASURES 3.353 M INSIDE DIAMETER X 28.44 M...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
EVAPORATOR COLUMN IN STAINLESS STEEL 304 (THIRD EFFECT) WITH 8 PLATES INSIDE (SIEVES TYPE), 2.4M X 7...
Hammer Price:
🔒
1998 BUFLOVAK 1556970
CHEMICAL PROCESSING EQUIPMENT
1998 BUFLOVAK ROTARY DRYER MODEL 1556970 SERIES 18706 / SECADOR ROTATIVO MARCA BUFLOVAK MODELO 15569...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
CYCLOHEXANE DISTILLATION COLUMN, UPPER SECTION EQUIPPED WITH STRUCTURED PACKING 1.5 METERS INTERNAL ...
Hammer Price:
🔒
1998 GE GHEK-22244001
ELECTRICAL AND POWER GENERATION EQUIPMENT
1998 GE ELECTRIC INDUCTION MOTOR, CAPACITY 3000 HP, 4160 V, 1780 RPM, MODEL GHEK-22244001, S/N: 9808...
Hammer Price:
🔒
1998 GE CHEK-22984001
ELECTRICAL AND POWER GENERATION EQUIPMENT
1998 GE ELECTRIC INDUCTION MOTOR, CAPACITY 4000 HP, MODEL CHEK-22984001, 4160 V, 1780 RPM, S/N: 9808...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
CARBON STEEL CONDENSER; AREA 122M2, SHELL DIAMETER 39", NO. OF TUBES 432, TUBE DIAMETER 1", TUBE LEN...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
LIGHTWEIGHT COLUMN, WITH SIEV TYPE PLATES, REBOILER (E-546) WRAPPED IN CARBON STEEL 55" X 8' LONG W ...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
EVAPORATOR COLUMN IN STAINLESS STEEL 304 (FIRST EFFECT) WITH 8 PLATES INSIDE (SIEVES TYPE), 1.05M X ...
Hammer Price:
🔒
TEMOSA CV620-3-213422
PACKAGING EQUIPMENT
TEMOSA VIBRATING FIBER, HEAVY DUTY MODEL, SERIES CV620-3-213422, MEASURES 6 X 20 - 3; IT HAS A 30 HP...
Hammer Price:
🔒
CHEMICAL PROCESSING EQUIPMENT
STAINLESS STEEL ROTARY DRYER / SECADOR ROTATIVO EN ACERO INOXIDABLE...
Hammer Price:
🔒
I. RAND 2CRVH
TANKS, PUMPS & STORAGE EQUIPMENT
1 I. RAND 15 HP CENTRIFUGAL PUMP AT 3500 RPM, MODEL 2CRVH, CLOSED IMPELLER TYPE, AMP PLATE 19, ROT M...
Hammer Price:
🔒
FLOWTEK F30
TANKS, PUMPS & STORAGE EQUIPMENT
FLOWTEK XPV EXTRA LARGE FLANGED SAFETY VALVE, XPV-5A404 10", MODEL F30, CLASS 300....
Hammer Price:
🔒
1997
INDUSTRIAL AND COOLING HEATING EQUIPMENT
1997 CARBON STEEL CHILLER: DESIGN PRESSURE 16.14 KG/CM2; TUBE PRESSURE 5.23KG/CM2; DESIGN TEMPERATUR...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
ANOL-ANONE RAW MIX STORAGE TANK, VERTICAL TYPE IN CARBON STEEL, 5.7 M INNER DIAMETER X 5.7 M LONG, W...
Hammer Price:
🔒
PETTIBONE P&H OMEGA
CONSTRUCTION EQUIPMENT
2023 PETTIBONE P&H OMEGA CRANE, 20 TON CAPACITY. NOT GUARANTEED TO WORK, PLEASE INSPECT. / GRUA MARC...
Hammer Price:
🔒