Forging Equipment

Harris Auctions

Category: WOODWORKING EQUIPMENT

Total Lots: 40

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–40 of 40 lots

Year	Make	Model	Lot Description	Hammer Price
2014	COSEN	SH-8580D	2014 COSEN DUAL COLUMN HORIZONTAL BAND SAW MODEL SH-8580D, 32 INCH ROUND CAPACITY, 2.62 INCH BLADE, 15 HP BLADE DRIVE, POWER INFEED REAR SHUTTLE VISE, 20' H.D CHAIN DRIVE POWER INFEED TABLES, 5' EXIT CONVEYOR 2014 · COSEN · SH-8580D	🔒 Subscribe
2014	COSEN	SH-7662	2014 COSEN SH-7662 DUAL COLUMN HORIZONTAL BAND SAW, 36 INCH X 24 INCH RECTANGULAR CAPACITY, 24 INCH ROUND CAPACITY, 2 INCH BLADE, 10 HP BLADE DRIVE, 20 FT. HEAVY DUTY CHAIN DRIVE POWER INFEED CONVEYOR, 5FT EXIT CONVEYOR S/N:SH10307598 2014 · COSEN · SH-7662	🔒 Subscribe
	BULLARD	VERTICAL TURRET LATHE	42 BULLARD VERTICAL TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK WITH HARD TOP JAWS. S/N: 24399 BULLARD · VERTICAL TURRET LATHE	🔒 Subscribe
2007	GARDNER DENVER	EAY99E	2007 GARDNER DENVER EAY99E HEAVY DUTY AIR COMPRESSOR ELECTRA SAVER II SCREW TYPE COMPRESSOR, 500 HP S/N: S263243 2007 · GARDNER DENVER · EAY99E	🔒 Subscribe
			FORGE FURNACE (777) APPROXIMATE INSIDE DIMENSIONS: 96W X 80 DEEP X 60 HEIGHT 2 BURNERS, AIR ACTUATED DOOR AND LOCKS, HONEYWELL CONTROLLER, HIGH LIMIT, PURGING, CHART RECORDER, BLOWER.	🔒 Subscribe
2005	HEM SAW	H3236M-DC	2005 HEM SAW H3236M-DC DUAL COLUMN HORIZONTAL BAND SAW, 32 INCH ROUND CAPACITY, 32 INCH X 36 INCH RECTANGULAR CAPACITY, 2 INCH BLADE, 20 HP DRIVE, WITH 20' OF EXTRA HEAVY DUTY CHAIN DRIVE POWER INFEED CONVEYOR S/N: 905105 2005 · HEM SAW · H3236M-DC	🔒 Subscribe
	WOTAN	HBM - 4	4 WOTAN HORIZONTAL MILLING MILL, HBM WITH BUILT IN ROTARY TABLE, TABLE SIZE: 55 X 43, 1600 RPM, 50 TAPER WITH POWER DRAW BAR, PENDANT CONTROL WOTAN · HBM - 4	🔒 Subscribe
	BULLARD	CUT MASTER	36 BULLARD CUT MASTER VERTICAL TURNING LATHE, 5 POSTION TURRET, NO TOOLING, NO JAWS, 1 SPEED S/N:25137 BULLARD · CUT MASTER	🔒 Subscribe
	GARDNER DENVER	EAUORE	300 HP GARDNER DENVER HEAVY DUTY SCREW TYPE AIR COMPRESSOR ELECTRA SAVER, MODEL : EAUORE, 460V S/N: U53824 GARDNER DENVER · EAUORE	🔒 Subscribe
	GARDNER DENVER	EAUORE	300HP GARDNER DENVER HEAVY DUTY SCREW TYPE AIR COMPRESSOR, MODEL: EAUORE, 300 HP, 460V S/N: U53825 GARDNER DENVER · EAUORE	🔒 Subscribe
	WARNER AND SWASEY	4A	4A WARNER AND SWASEY TURRET LATHE, CROSS SLIDING REAR TURRET, 24 INCH 4 JAW CUSHMAN CHUCK, RAPID TRAVERSE, 9 INCH SPINDLE BORE, MISC. TOOL HOLDERS S/N:612909 WARNER AND SWASEY · 4A	🔒 Subscribe
	LANDEL		LANDEL 1 TON JIB CRANE WITH COFFIN 1/2 TON HOIST LANDEL	🔒 Subscribe
	GISHOLT	5L	GISHOLT 5L TURRET LATHE, 9.5 INCH SPINDLE BORE, 31.5 INCH 4 JAW CHUCK WITH 12.5 INCH HOLE, CROSS SLIDING REAR TURRET, RAPID TRAVERSE GISHOLT · 5L	🔒 Subscribe
	BULLARD	VTL	36 BULLARD VERTICAL TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK WITH HARD TOP JAWS. S/N:40255 BULLARD · VTL	🔒 Subscribe
	BULLARD	42	42 BULLARD TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK, HARD TOP JAWS S/N:17861 BULLARD · 42	🔒 Subscribe
	YALE		YALE 2 TON JIB CRANE WITH 1 TON DAYTON ELECTRIC HOIST. OVER ALL HEIGHT :132 INCH OVER ALL ARM REACH: 132 INCH YALE	🔒 Subscribe
	TREE	2UVR	TREE MILL MILLING MACHINE, 10 INCH X 42 INCH TABLE, 6 INCH VISE TREE · 2UVR	🔒 Subscribe
			FORGE FURNACE / OVEN APROXIMATE INSIDE DIMENSIONS: 84 W X 72 DEEP X 60 HEIGHT 2 BURNERS, HONEYWELL CONTROLLERS, BLOWER	🔒 Subscribe
	DAPRA TECHNOMARK	MULTI4-V2	DAPRA TECHNOMARK MULTI4-V2 DOT PEEN MARKING MACHINE S/N: 0816021 DAPRA TECHNOMARK · MULTI4-V2	🔒 Subscribe
			LOT OF PUNCH DIES ASSORTED SIZES	🔒 Subscribe
1980	ELECTRO WELDING CO. INC.		1980 ELECTRO WELDING CO. INC. AIR TANK RECEIVER, MAX TEST PRESS: 468, MAX ALLOW WORKING PRESS: 207, 12 10 HIGH X 4 FT DIA. S/N: 8011-2080 1980 · ELECTRO WELDING CO. INC.	🔒 Subscribe
	CINCINNATI BICKFORD	RADIAL ARM DRILL PRESS	CINCINNATI BICKFORD RADIAL ARM DRILL PRESS S/N FH65, EQUIPPED WITH 46 6 JAW MANUAL ROTARY TABLE, 4 CYLINDER, 30 OF ADJUSTABLE HEIGHT CINCINNATI BICKFORD · RADIAL ARM DRILL PRESS	🔒 Subscribe
	ARCHDALE		ARCHDALE DRILL PRESS WITH 24 L X 19 W X 11 1/2 TABLE BASE. ARCHDALE	🔒 Subscribe
	CLEEREMAN		CLEEREMAN DRILL PRESS, EQUIPPED WITH 12 3 JAW CHUCK AND 24 L X 18 W X 18 H T SLOTTED TABLE, 1660 RPM MAIN DRIVE MOTOR S/N:3043 CLEEREMAN	🔒 Subscribe
	BABIN MACHINE WORKS	24EE CIRCL-MATIC	BABIN MACHINE WORKS DRIL PRESS MODE 24EE CIRCL-MATIC, WITH VICKERS FLOW CONTROL VALVE, ABB DRIVES, 1760 RPM MAIN DRIVE MOTOR, 43 ADJUSTABLE VISE CHUCK S/N:ADP-368 BABIN MACHINE WORKS · 24EE CIRCL-MATIC	🔒 Subscribe
	BABIN MACHINE WORKS	36 EE CIRCL-MATIC	BABIN MACHINE WORKS DRIL PRESS MODE 36 EE CIRCL-MATIC, WITH VICKERS FLOW CONTROL VALVE, 1800 RPM MAIN DRIVE MOTOR, 43 ADJUSTABLE VISE CHUCK, WITH STERLING SPEED TROL ATTACHMENT S/N:ADP-277 BABIN MACHINE WORKS · 36 EE CIRCL-MATIC	🔒 Subscribe
			FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 96 W X 72 DEEP X 48 HEIGHT 2 BURNERS, HONEYWELL CONTROLLERS, BLOWER	🔒 Subscribe
			OVEN	🔒 Subscribe
			RING ROLLING MILL, MECHANICAL DRIVE 150 HP FOR KING ROLL, HYDRAULIC UP-LIFTING PINCH ROLL	🔒 Subscribe
			FORGING HAMMER ANVIL. DIMENSIONS: 76L X 106W X 72H - SOLID. WEIGHT CALCULATED AT APPROXIMATELY 165,000 LBS.	🔒 Subscribe
	MANCHESTER		MANCHESTER AIR TANK RECEIVER 125 MAX PSI, 1060 GAL. 12 7 HIGH X 4 2 DIA. TANK ONLY; PIPING NOT INCLUDED MANCHESTER	🔒 Subscribe
	MANCHESTER		MANCHESTER AIR TANK RECEIVER 150 MAX PSI, 2560 GAL. 18 8 HIGH X 6 2 DIA. TANK ONLY; PIPING NOT INCLUDED MANCHESTER	🔒 Subscribe
	SILVAN INDUSTRIES		SILVAN INDUSTRIES AIR TANK RECEIVER 150 MAX PSI, 1550 GAL. 15 FT HIGH X 4 11 DIA. TANK ONLY SILVAN INDUSTRIES	🔒 Subscribe
	COLORADO INTERSTATE CO		COLORADO INTERSTATE CO AIR TANK RECEIVER 31 FT LONG X 6 8 WIDE X 8 7 HIGH COLORADO INTERSTATE CO	🔒 Subscribe
	CHAMBERSBURG	6,000 LB. FORGING HAMMER	6,000 LB. CHAMBERSBURG FORGING HAMMER DISTANCE BETWEEN HOUSING: 102, 48 HEIGHT FROM PLATEN CHAMBERSBURG · 6,000 LB. FORGING HAMMER	🔒 Subscribe
	CHAMBERSBURG		12,000 LB. CHAMBERSBURG FORGING HAMMER DISTANCE BETWEEN THE HOUSING: 120, 48 HEIGHT FROM THE PLATEN TO FRAME, PLATEN: 48 W X 76 L. CHAMBERSBURG	🔒 Subscribe
			FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 92 W X 72 DEEP X 48 HEIGHT. 2 BURNERS, HENEYWELL CONTROLLERS, BLOWER	🔒 Subscribe
			FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 92 W X 72 DEEP X 60 HEIGHT 2 BURNERS, AIR ACTUATED DOOR AND LOCK, HONEYWELL CONTROLLER, HIGH LIMIT, PURGE, CHART RECORDER, BLOWER. MAX TEMP: 2300	🔒 Subscribe
			(5) 84 W X 72 DEEP X 48 HEIGHT FORGE FURNACE / OVEN, 2 BURNERS, HONEYWELL CONTROLLERS, BLOWER	🔒 Subscribe
	BULLARD		50 BULLARD VERTICAL TURNING LATHE VTL, 4 JAW CHUCK, TURRET, SIDE HEAD. S/N:18525 BULLARD	🔒 Subscribe

Year	Make	Model	Description	Price
2014	COSEN	SH-8580D	2014 COSEN DUAL COLUMN HORIZONTAL BAND SAW MODEL SH-8580D, 32 INCH ROUND CAPACITY, 2.62 INCH BLADE, 15 HP BLADE DRIVE, POWER INFEED REAR SHUTTLE VISE, 20' H.D CHAIN DRIVE POWER INFEED TABLES, 5' EXIT CONVEYOR	🔒 Subscribe
2014	COSEN	SH-7662	2014 COSEN SH-7662 DUAL COLUMN HORIZONTAL BAND SAW, 36 INCH X 24 INCH RECTANGULAR CAPACITY, 24 INCH ROUND CAPACITY, 2 INCH BLADE, 10 HP BLADE DRIVE, 20 FT. HEAVY DUTY CHAIN DRIVE POWER INFEED CONVEYOR, 5FT EXIT CONVEYOR S/N:SH10307598	🔒 Subscribe
	BULLARD	VERTICAL TURRET LATHE	42 BULLARD VERTICAL TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK WITH HARD TOP JAWS. S/N: 24399	🔒 Subscribe
2007	GARDNER DENVER	EAY99E	2007 GARDNER DENVER EAY99E HEAVY DUTY AIR COMPRESSOR ELECTRA SAVER II SCREW TYPE COMPRESSOR, 500 HP S/N: S263243	🔒 Subscribe
			FORGE FURNACE (777) APPROXIMATE INSIDE DIMENSIONS: 96W X 80 DEEP X 60 HEIGHT 2 BURNERS, AIR ACTUATED DOOR AND LOCKS, HONEYWELL CONTROLLER, HIGH LIMIT, PURGING, CHART RECORDER, BLOWER.	🔒 Subscribe
2005	HEM SAW	H3236M-DC	2005 HEM SAW H3236M-DC DUAL COLUMN HORIZONTAL BAND SAW, 32 INCH ROUND CAPACITY, 32 INCH X 36 INCH RECTANGULAR CAPACITY, 2 INCH BLADE, 20 HP DRIVE, WITH 20' OF EXTRA HEAVY DUTY CHAIN DRIVE POWER INFEED CONVEYOR S/N: 905105	🔒 Subscribe
	WOTAN	HBM - 4	4 WOTAN HORIZONTAL MILLING MILL, HBM WITH BUILT IN ROTARY TABLE, TABLE SIZE: 55 X 43, 1600 RPM, 50 TAPER WITH POWER DRAW BAR, PENDANT CONTROL	🔒 Subscribe
	BULLARD	CUT MASTER	36 BULLARD CUT MASTER VERTICAL TURNING LATHE, 5 POSTION TURRET, NO TOOLING, NO JAWS, 1 SPEED S/N:25137	🔒 Subscribe
	GARDNER DENVER	EAUORE	300 HP GARDNER DENVER HEAVY DUTY SCREW TYPE AIR COMPRESSOR ELECTRA SAVER, MODEL : EAUORE, 460V S/N: U53824	🔒 Subscribe
	GARDNER DENVER	EAUORE	300HP GARDNER DENVER HEAVY DUTY SCREW TYPE AIR COMPRESSOR, MODEL: EAUORE, 300 HP, 460V S/N: U53825	🔒 Subscribe
	WARNER AND SWASEY	4A	4A WARNER AND SWASEY TURRET LATHE, CROSS SLIDING REAR TURRET, 24 INCH 4 JAW CUSHMAN CHUCK, RAPID TRAVERSE, 9 INCH SPINDLE BORE, MISC. TOOL HOLDERS S/N:612909	🔒 Subscribe
	LANDEL		LANDEL 1 TON JIB CRANE WITH COFFIN 1/2 TON HOIST	🔒 Subscribe
	GISHOLT	5L	GISHOLT 5L TURRET LATHE, 9.5 INCH SPINDLE BORE, 31.5 INCH 4 JAW CHUCK WITH 12.5 INCH HOLE, CROSS SLIDING REAR TURRET, RAPID TRAVERSE	🔒 Subscribe
	BULLARD	VTL	36 BULLARD VERTICAL TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK WITH HARD TOP JAWS. S/N:40255	🔒 Subscribe
	BULLARD	42	42 BULLARD TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK, HARD TOP JAWS S/N:17861	🔒 Subscribe
	YALE		YALE 2 TON JIB CRANE WITH 1 TON DAYTON ELECTRIC HOIST. OVER ALL HEIGHT :132 INCH OVER ALL ARM REACH: 132 INCH	🔒 Subscribe
	TREE	2UVR	TREE MILL MILLING MACHINE, 10 INCH X 42 INCH TABLE, 6 INCH VISE	🔒 Subscribe
			FORGE FURNACE / OVEN APROXIMATE INSIDE DIMENSIONS: 84 W X 72 DEEP X 60 HEIGHT 2 BURNERS, HONEYWELL CONTROLLERS, BLOWER	🔒 Subscribe
	DAPRA TECHNOMARK	MULTI4-V2	DAPRA TECHNOMARK MULTI4-V2 DOT PEEN MARKING MACHINE S/N: 0816021	🔒 Subscribe
			LOT OF PUNCH DIES ASSORTED SIZES	🔒 Subscribe
1980	ELECTRO WELDING CO. INC.		1980 ELECTRO WELDING CO. INC. AIR TANK RECEIVER, MAX TEST PRESS: 468, MAX ALLOW WORKING PRESS: 207, 12 10 HIGH X 4 FT DIA. S/N: 8011-2080	🔒 Subscribe
	CINCINNATI BICKFORD	RADIAL ARM DRILL PRESS	CINCINNATI BICKFORD RADIAL ARM DRILL PRESS S/N FH65, EQUIPPED WITH 46 6 JAW MANUAL ROTARY TABLE, 4 CYLINDER, 30 OF ADJUSTABLE HEIGHT	🔒 Subscribe
	ARCHDALE		ARCHDALE DRILL PRESS WITH 24 L X 19 W X 11 1/2 TABLE BASE.	🔒 Subscribe
	CLEEREMAN		CLEEREMAN DRILL PRESS, EQUIPPED WITH 12 3 JAW CHUCK AND 24 L X 18 W X 18 H T SLOTTED TABLE, 1660 RPM MAIN DRIVE MOTOR S/N:3043	🔒 Subscribe
	BABIN MACHINE WORKS	24EE CIRCL-MATIC	BABIN MACHINE WORKS DRIL PRESS MODE 24EE CIRCL-MATIC, WITH VICKERS FLOW CONTROL VALVE, ABB DRIVES, 1760 RPM MAIN DRIVE MOTOR, 43 ADJUSTABLE VISE CHUCK S/N:ADP-368	🔒 Subscribe
	BABIN MACHINE WORKS	36 EE CIRCL-MATIC	BABIN MACHINE WORKS DRIL PRESS MODE 36 EE CIRCL-MATIC, WITH VICKERS FLOW CONTROL VALVE, 1800 RPM MAIN DRIVE MOTOR, 43 ADJUSTABLE VISE CHUCK, WITH STERLING SPEED TROL ATTACHMENT S/N:ADP-277	🔒 Subscribe
			FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 96 W X 72 DEEP X 48 HEIGHT 2 BURNERS, HONEYWELL CONTROLLERS, BLOWER	🔒 Subscribe
			OVEN	🔒 Subscribe
			RING ROLLING MILL, MECHANICAL DRIVE 150 HP FOR KING ROLL, HYDRAULIC UP-LIFTING PINCH ROLL	🔒 Subscribe
			FORGING HAMMER ANVIL. DIMENSIONS: 76L X 106W X 72H - SOLID. WEIGHT CALCULATED AT APPROXIMATELY 165,000 LBS.	🔒 Subscribe
	MANCHESTER		MANCHESTER AIR TANK RECEIVER 125 MAX PSI, 1060 GAL. 12 7 HIGH X 4 2 DIA. TANK ONLY; PIPING NOT INCLUDED	🔒 Subscribe
	MANCHESTER		MANCHESTER AIR TANK RECEIVER 150 MAX PSI, 2560 GAL. 18 8 HIGH X 6 2 DIA. TANK ONLY; PIPING NOT INCLUDED	🔒 Subscribe
	SILVAN INDUSTRIES		SILVAN INDUSTRIES AIR TANK RECEIVER 150 MAX PSI, 1550 GAL. 15 FT HIGH X 4 11 DIA. TANK ONLY	🔒 Subscribe
	COLORADO INTERSTATE CO		COLORADO INTERSTATE CO AIR TANK RECEIVER 31 FT LONG X 6 8 WIDE X 8 7 HIGH	🔒 Subscribe
	CHAMBERSBURG	6,000 LB. FORGING HAMMER	6,000 LB. CHAMBERSBURG FORGING HAMMER DISTANCE BETWEEN HOUSING: 102, 48 HEIGHT FROM PLATEN	🔒 Subscribe
	CHAMBERSBURG		12,000 LB. CHAMBERSBURG FORGING HAMMER DISTANCE BETWEEN THE HOUSING: 120, 48 HEIGHT FROM THE PLATEN TO FRAME, PLATEN: 48 W X 76 L.	🔒 Subscribe
			FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 92 W X 72 DEEP X 48 HEIGHT. 2 BURNERS, HENEYWELL CONTROLLERS, BLOWER	🔒 Subscribe
			FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 92 W X 72 DEEP X 60 HEIGHT 2 BURNERS, AIR ACTUATED DOOR AND LOCK, HONEYWELL CONTROLLER, HIGH LIMIT, PURGE, CHART RECORDER, BLOWER. MAX TEMP: 2300	🔒 Subscribe
			(5) 84 W X 72 DEEP X 48 HEIGHT FORGE FURNACE / OVEN, 2 BURNERS, HONEYWELL CONTROLLERS, BLOWER	🔒 Subscribe
	BULLARD		50 BULLARD VERTICAL TURNING LATHE VTL, 4 JAW CHUCK, TURRET, SIDE HEAD. S/N:18525	🔒 Subscribe

2014 COSEN SH-8580D

WOODWORKING EQUIPMENT

2014 COSEN DUAL COLUMN HORIZONTAL BAND SAW MODEL SH-8580D, 32 INCH ROUND CAPACITY, 2.62 INCH BLADE, ...

Hammer Price: 🔒

2014 COSEN SH-7662

WOODWORKING EQUIPMENT

2014 COSEN SH-7662 DUAL COLUMN HORIZONTAL BAND SAW, 36 INCH X 24 INCH RECTANGULAR CAPACITY, 24 INCH ...

Hammer Price: 🔒

BULLARD VERTICAL TURRET LATHE

METALWORKING & FABRICATION EQUIPMENT

42 BULLARD VERTICAL TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK WITH HARD TOP JAWS. S/N: ...

Hammer Price: 🔒

2007 GARDNER DENVER EAY99E

AIR COMPRESSORS

2007 GARDNER DENVER EAY99E HEAVY DUTY AIR COMPRESSOR ELECTRA SAVER II SCREW TYPE COMPRESSOR, 500 HP ...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

FORGE FURNACE (777) APPROXIMATE INSIDE DIMENSIONS: 96W X 80 DEEP X 60 HEIGHT 2 BURNERS, AIR ACTUATED...

Hammer Price: 🔒

2005 HEM SAW H3236M-DC

WOODWORKING EQUIPMENT

2005 HEM SAW H3236M-DC DUAL COLUMN HORIZONTAL BAND SAW, 32 INCH ROUND CAPACITY, 32 INCH X 36 INCH RE...

Hammer Price: 🔒

WOTAN HBM - 4

METALWORKING & FABRICATION EQUIPMENT

4 WOTAN HORIZONTAL MILLING MILL, HBM WITH BUILT IN ROTARY TABLE, TABLE SIZE: 55 X 43, 1600 RPM, 50 T...

Hammer Price: 🔒

BULLARD CUT MASTER

METALWORKING & FABRICATION EQUIPMENT

36 BULLARD CUT MASTER VERTICAL TURNING LATHE, 5 POSTION TURRET, NO TOOLING, NO JAWS, 1 SPEED S/N:251...

Hammer Price: 🔒

GARDNER DENVER EAUORE

AIR COMPRESSORS

300 HP GARDNER DENVER HEAVY DUTY SCREW TYPE AIR COMPRESSOR ELECTRA SAVER, MODEL : EAUORE, 460V S/N: ...

Hammer Price: 🔒

GARDNER DENVER EAUORE

AIR COMPRESSORS

300HP GARDNER DENVER HEAVY DUTY SCREW TYPE AIR COMPRESSOR, MODEL: EAUORE, 300 HP, 460V S/N: U53825...

Hammer Price: 🔒

WARNER AND SWASEY 4A

METALWORKING & FABRICATION EQUIPMENT

4A WARNER AND SWASEY TURRET LATHE, CROSS SLIDING REAR TURRET, 24 INCH 4 JAW CUSHMAN CHUCK, RAPID TRA...

Hammer Price: 🔒

LANDEL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

LANDEL 1 TON JIB CRANE WITH COFFIN 1/2 TON HOIST...

Hammer Price: 🔒

GISHOLT 5L

METALWORKING & FABRICATION EQUIPMENT

GISHOLT 5L TURRET LATHE, 9.5 INCH SPINDLE BORE, 31.5 INCH 4 JAW CHUCK WITH 12.5 INCH HOLE, CROSS SLI...

Hammer Price: 🔒

BULLARD VTL

METALWORKING & FABRICATION EQUIPMENT

36 BULLARD VERTICAL TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK WITH HARD TOP JAWS. S/N:4...

Hammer Price: 🔒

BULLARD 42

METALWORKING & FABRICATION EQUIPMENT

42 BULLARD TURRET LATHE, VTL, TURRET HEAD, SIDE HEAD, 4 JAW CHUCK, HARD TOP JAWS S/N:17861...

Hammer Price: 🔒

YALE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

YALE 2 TON JIB CRANE WITH 1 TON DAYTON ELECTRIC HOIST. OVER ALL HEIGHT :132 INCH OVER ALL ARM REACH:...

Hammer Price: 🔒

TREE 2UVR

METALWORKING & FABRICATION EQUIPMENT

TREE MILL MILLING MACHINE, 10 INCH X 42 INCH TABLE, 6 INCH VISE...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

FORGE FURNACE / OVEN APROXIMATE INSIDE DIMENSIONS: 84 W X 72 DEEP X 60 HEIGHT 2 BURNERS, HONEYWELL C...

Hammer Price: 🔒

DAPRA TECHNOMARK MULTI4-V2

SURFACE FINISHING EQUIPMENT

DAPRA TECHNOMARK MULTI4-V2 DOT PEEN MARKING MACHINE S/N: 0816021...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

LOT OF PUNCH DIES ASSORTED SIZES...

Hammer Price: 🔒

1980 ELECTRO WELDING CO. INC.

AIR COMPRESSORS

1980 ELECTRO WELDING CO. INC. AIR TANK RECEIVER, MAX TEST PRESS: 468, MAX ALLOW WORKING PRESS: 207, ...

Hammer Price: 🔒

CINCINNATI BICKFORD RADIAL ARM DRILL PRESS

METALWORKING & FABRICATION EQUIPMENT

CINCINNATI BICKFORD RADIAL ARM DRILL PRESS S/N FH65, EQUIPPED WITH 46 6 JAW MANUAL ROTARY TABLE, 4 C...

Hammer Price: 🔒

ARCHDALE

METALWORKING & FABRICATION EQUIPMENT

ARCHDALE DRILL PRESS WITH 24 L X 19 W X 11 1/2 TABLE BASE....

Hammer Price: 🔒

CLEEREMAN

METALWORKING & FABRICATION EQUIPMENT

CLEEREMAN DRILL PRESS, EQUIPPED WITH 12 3 JAW CHUCK AND 24 L X 18 W X 18 H T SLOTTED TABLE, 1660 RPM...

Hammer Price: 🔒

BABIN MACHINE WORKS 24EE CIRCL-MATIC

METALWORKING & FABRICATION EQUIPMENT

BABIN MACHINE WORKS DRIL PRESS MODE 24EE CIRCL-MATIC, WITH VICKERS FLOW CONTROL VALVE, ABB DRIVES, 1...

Hammer Price: 🔒

BABIN MACHINE WORKS 36 EE CIRCL-MATIC

METALWORKING & FABRICATION EQUIPMENT

BABIN MACHINE WORKS DRIL PRESS MODE 36 EE CIRCL-MATIC, WITH VICKERS FLOW CONTROL VALVE, 1800 RPM MAI...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 96 W X 72 DEEP X 48 HEIGHT 2 BURNERS, HONEYWELL ...

Hammer Price: 🔒

MISC

OVEN...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

RING ROLLING MILL, MECHANICAL DRIVE 150 HP FOR KING ROLL, HYDRAULIC UP-LIFTING PINCH ROLL...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

FORGING HAMMER ANVIL. DIMENSIONS: 76L X 106W X 72H - SOLID. WEIGHT CALCULATED AT APPROXIMATELY 165,0...

Hammer Price: 🔒

MANCHESTER

AIR COMPRESSORS

MANCHESTER AIR TANK RECEIVER 125 MAX PSI, 1060 GAL. 12 7 HIGH X 4 2 DIA. TANK ONLY; PIPING NOT INCLU...

Hammer Price: 🔒

MANCHESTER

AIR COMPRESSORS

MANCHESTER AIR TANK RECEIVER 150 MAX PSI, 2560 GAL. 18 8 HIGH X 6 2 DIA. TANK ONLY; PIPING NOT INCLU...

Hammer Price: 🔒

SILVAN INDUSTRIES

AIR COMPRESSORS

SILVAN INDUSTRIES AIR TANK RECEIVER 150 MAX PSI, 1550 GAL. 15 FT HIGH X 4 11 DIA. TANK ONLY...

Hammer Price: 🔒

COLORADO INTERSTATE CO

AIR COMPRESSORS

COLORADO INTERSTATE CO AIR TANK RECEIVER 31 FT LONG X 6 8 WIDE X 8 7 HIGH...

Hammer Price: 🔒

CHAMBERSBURG 6,000 LB. FORGING HAMMER

DIE CASTING & FORGING EQUIPMENT

6,000 LB. CHAMBERSBURG FORGING HAMMER DISTANCE BETWEEN HOUSING: 102, 48 HEIGHT FROM PLATEN...

Hammer Price: 🔒

CHAMBERSBURG

DIE CASTING & FORGING EQUIPMENT

12,000 LB. CHAMBERSBURG FORGING HAMMER DISTANCE BETWEEN THE HOUSING: 120, 48 HEIGHT FROM THE PLATEN ...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 92 W X 72 DEEP X 48 HEIGHT. 2 BURNERS, HENEYWELL...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

FORGE FURNACE / OVEN APPROXIMATE INSIDE DIMENSIONS: 92 W X 72 DEEP X 60 HEIGHT 2 BURNERS, AIR ACTUAT...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

(5) 84 W X 72 DEEP X 48 HEIGHT FORGE FURNACE / OVEN, 2 BURNERS, HONEYWELL CONTROLLERS, BLOWER...

Hammer Price: 🔒

BULLARD

METALWORKING & FABRICATION EQUIPMENT

50 BULLARD VERTICAL TURNING LATHE VTL, 4 JAW CHUCK, TURRET, SIDE HEAD. S/N:18525...

Hammer Price: 🔒

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Forging Equipment

Save to Project Folder

Print Options

Save to Project Folder