BOGE Rubber Plastics

Maynards Industries USA LLC

Category: PRESSES & FORMING

Total Lots: 119

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 119 lots

Year	Make	Model	Lot Description	Hammer Price
	PH HYDRAULICS	OGF-50	PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5'' @1990 MAX PSI, STROKE 0-24'' MAX, DAYLIGHT OPENING 30'', THROAT DEPTH 15'', BED AREA 30'' X 27'', POWER UNIT 20 HP, 1750 RPM MOTOR, APPROXIMATE WEIGHT 9,800 LBS, OVERALL DIMENSIONS 48'' X 80'' X 109'', 150 GALLONS, FLUID : MOBILE DTE 26 S/N SWC-008 - 34316 PH HYDRAULICS · OGF-50	🔒 Subscribe
	PH HYDRAULICS	OGF-50	PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5 INCHES @1990 MAX PSI, STROKE 0-24 INCHES MAX, DAYLIGHT OPENING 30 INCHES, THROAT DEPTH 15 INCHES, BED AREA 30 X 27 INCHES, POWER UNIT 20 HP, 1750 RPM MOTOR, APPROXIMATE WEIGHT 9,800 LBS, OVERALL DIMENSIONS 48 X 80 X 109 INCHES, 150 GALLONS, FLUID : MOBILE DTE 26 S/N: SWG-009 - 61314 PH HYDRAULICS · OGF-50	🔒 Subscribe
	ACER DYNAMIC	1760 G	ACER DYNAMIC 1760 G 17 INCH HIGH SPEED ENGINE LATHE, 50-1800 RPM, 10 INCH 3 JAW CHUCK, STEADY REST, TAILSTOCK, TOOL POST S/N: 11101 ACER DYNAMIC · 1760 G	🔒 Subscribe
2008	MULTIPLES	M5P-15	2008 MULTIPLES M5P-15 HYDRAULIC PRESS, 15 TON, 4.0'' BORE, MAX OPERATING PRESSURE 2,387 PSI, PUMP OUTPUT REXROTH 9 GPM, RESERVOIR FLUID 23 GALLONS, HYDRAULIC FLUID DTE 26, 460 VOLTAGE, 3 PHASE, 60 HZ S/N: M-5896 2008 · MULTIPLES · M5P-15	🔒 Subscribe
1996	GREENERD	HPB-15	1996 GREENERD HPB-15 HYDRAULIC PRESS 15 TON MAX CAPACITY, 8 INCH MAX STROKE, MAX DAYLIGHT 14 INCH, BED AREA 18 INCH X 11 INCH, RAM AREA 12 INCH X 6 INCH, 9 INCH THROAT, CYLINDER 4.0 INCH BORE, RAM ROD 2.5 INCH DIA., 5 HP, 1725 RPM, 230/460 VOLT, 13.2 AMP, 6.8 AMP S/N: 96T510 1996 · GREENERD · HPB-15	🔒 Subscribe
	PH HYDRAULICS	OGF-50	PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5'' @1990 MAX PSI, STROKE 0-24'' MAX, DAYLIGHT OPENING 30'', THROAT DEPTH 15'', BED AREA 30'' X 27'', POWER UNIT 20 HP, 1750 RPM MOTOR, APPROXIMATE WEIGHT 9,800 LBS, OVERALL DIMENSIONS 48'' X 80'' X 109'', 150 GALLONS, FLUID : MOBILE DTE 26 S/N: INS-008 - 61315 PH HYDRAULICS · OGF-50	🔒 Subscribe
2018	ORBITFORM	P-845	2018 ORBITFORM P-845 HEAD FORMING CAPACITY .840'', MAX STROKE 2.5'', MAX THRUST 12,700 LBS @ 100 PSI, WEIGHT 1200 LBS, WIDTH 16'', DEPTH 26.75'', THROAT DEPTH 9.0'', HEIGHT 56'', BASE HEIGHT 6'' 480 VOLTAGE, 3 PHASE, 60 HZ, 3.5A MAX FLA, MAIN FUSE LP-CC-10, LARGEST LOAD 3 AMPS, SCCR RATED 100KA, HMI CONTROL S/N: 51988 2018 · ORBITFORM · P-845	🔒 Subscribe
	PARKER	KARRY KRIMP	PARKER HYDRAULIC KARRY KRIMP BENCH MOUNT HOSE CRIMPING SYSTEM AND CHOP SAW PARKER · KARRY KRIMP	🔒 Subscribe
	LINCOLN ELECTRIC	MIG 300	LINCOLN ELECTRIC MIG 300 NO TANKS LINCOLN ELECTRIC · MIG 300	🔒 Subscribe
	ALLIANT	949-3V	ALLIANT 949-3V VERTICAL MILLING MACHINE WITH POWER FEED, SONY LH51 DIGITAL READ OUT, TABLE SIZE 9 X 49 INCH T-SLOTTED TABLE S/N: 2716 ALLIANT · 949-3V	🔒 Subscribe
	MILLER	MILLERMATIC 251	MILLER MILLERMATIC 251 WIRE WELDER, SINGLE-PHASE MIG/FLUX-CORED WELDER, PROCESSES MIG (GMAW), FLUX-CORED (FCAW), OUTPUT CURRENT TYPE DC, MAXIMUM AMPERAGE RANGE 30 - 300 AMPS DC, RATED OUTPUT @ 60% DUTY CYCLE 200 AMPS @ 28 VDC, RATED OUTPUT @ 40% DUTY CYCLE 250 AMPS @ 28 VDC, MAX MATERIAL THICKNESS (SINGLE PASS) 1/2 INCH MILD STEEL, WIRE FEED SPEED RANGE 25 TO 700 IPM, INPUT POWER 200/230 V, SINGLE PHASE, 60 HZ, DIGITAL METERS, WIRE CAPACITY 0.023 INCH TO 0.045 INCH, APPROXIMATE WEIGHT 215 LBS, NO TANKS S/N MILLER · MILLERMATIC 251	🔒 Subscribe
	LYON		18 DRAWER LYON STORAGE CABINET WITH ASSORTED SIZE AND SHAPE HYDRAULIC FITTINGS LYON	🔒 Subscribe
			3 HOSE RACKS WITH (6) SPOOLS OF HOSE	🔒 Subscribe
	MILLER	CP-300	MILLER CP-300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE WITH MILLER S-22A 24 VOLT CONSTANT SPEED WIRE FEEDER S/N KE607663 MILLER · CP-300	🔒 Subscribe
	LYON		11 DRAWER LYON STORAGE CABINET LYON	🔒 Subscribe
	LINCOLN ELECTRIC	SP-125 PLUS	LINCOLN ELECTRIC SP-125 PLUS NO TANKS S/N U1990833932 LINCOLN ELECTRIC · SP-125 PLUS	🔒 Subscribe
	WATERLOO	24 DRAWER ROLLING TOOL BOX	WATERLOO 24 DRAWER ROLLING TOOL BOX WITH CONTENTS TO INCLUDE : CARBIDE INSERTS, TAPS, DIES, ROUGHING MILLS, LATHE TOOLING BARS, AND TOOL HOLDERS WATERLOO · 24 DRAWER ROLLING TOOL BOX	🔒 Subscribe
	WILTON	4200	25 METALWORKING COMBINATION DISC/BELT GRINDER, 12 INCH DISC AND 6 INCH X 40 INCH BELT S/N: 33657 WILTON · 4200	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH SOUTHWORTH	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH SOUTHWORTH	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH SOUTHWORTH	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 49 INCH X 44 INCH SOUTHWORTH	🔒 Subscribe
			15 DRAWER ROLLING TOOL BOX WITH CONTENTS	🔒 Subscribe
			HYDRO ASSEMBLY CELL	🔒 Subscribe
	RAPID	F-14 MULTI CUTTER GRANULATOR	RAPID F-14 MULTI CUTTER GRANULATOR 460 VOLTS, 12 FLA, 60 HZ, 3 PHASE S/N: RA-390.148926.10.1 RAPID · F-14 MULTI CUTTER GRANULATOR	🔒 Subscribe
	DESMA	968.400 ZO B750	500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-133 DESMA · 968.400 ZO B750	🔒 Subscribe
2003	DESMA	.400 ZO B750	2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDER NO. 803566, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-135 2003 · DESMA · .400 ZO B750	🔒 Subscribe
2003	DESMA	.400 ZO B750	2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-141 2003 · DESMA · .400 ZO B750	🔒 Subscribe
			STEEL WELDING BENCH WITH 6 INCH TABLE VISE, TABLE SIZE 120 INCH X 48 INCH X 37 INCH TALL	🔒 Subscribe
	MILWAUKEE		MILWAUKEE 3/4'' ELECTROMAGNETIC DRILL PRESS CHUCK CAPACITY 3/4'', MAX TAPPING CAPACITY 1''-14 THREADED HOLES, MOTOR AMPERAGE 11.5 AMPS DRILL POINT PRESSURE (MAX FORCE) 1,630 LBS TO 1,670 LBS, ON 1'' STEEL PLATE) SPINDLE SPEED (LOW RANGE)350 RPM (GEARED FOR HIGH TORQUE)SPINDLE SPEED (HIGH RANGE) VOLTAGE 120 AC DRILL TRAVEL (STROKE) 5'' S/N: 502A196171031 MILWAUKEE	🔒 Subscribe
			(2) GAGE BLOCK SETS AND PARTS BLOCKS	🔒 Subscribe
	BROWN AND SHARPE	TESA-HITE 350	BROWN AND SHARPE TESA-HITE 350 DIGITAL HEIGHT GAUGE 14 INCH HEIGHT CAPACITY RANGE S/N: 8E03302 BROWN AND SHARPE · TESA-HITE 350	🔒 Subscribe
2007	RAPID	MC-18	2007 RAPID MC-18 MULTI CUTTER GRANULATOR S/N: 48067 2007 · RAPID · MC-18	🔒 Subscribe
2003	DESMA	.400 ZO B750	2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-148 2003 · DESMA · .400 ZO B750	🔒 Subscribe
	DESMA	968.400 ZO B750	DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE, EUROMAP SIZE 4500-14000, INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-121 DESMA · 968.400 ZO B750	🔒 Subscribe
2002	DESMA	.400 ZO B750	2002 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDER NO. 803013, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-131 2002 · DESMA · .400 ZO B750	🔒 Subscribe
2003	DESMA	.400 ZO B750	2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-136 2003 · DESMA · .400 ZO B750	🔒 Subscribe
2003	DESMA	968.400 ZO B750	2003 DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-142 2003 · DESMA · 968.400 ZO B750	🔒 Subscribe
2004	DESMA	968.400 ZO B750	2004 DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460 , 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-142 2004 · DESMA · 968.400 ZO B750	🔒 Subscribe
2002	DESMA	.400 ZO B750	2002 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDER NO. 803014, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460 , 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-129 2002 · DESMA · .400 ZO B750	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH SOUTHWORTH	🔒 Subscribe
			HYDRO ASSEMBLY CELL 6 WITH KEYENCE LASER MARKER, SIEMENS CONTROLS/PLC	🔒 Subscribe
	HAHN	ASSEMBLY CELL	HAHN ASSEMBLY CELL (2) INCLINED HOPPER/FEEDERS, CONVEYOR SIZE 24 INCH X 12FT, (2) PARTS HOPPERS 12 INCH X 5FT HAHN · ASSEMBLY CELL	🔒 Subscribe
	DYNA SYSTEMS		(3) DYNA SYSTEMS UPRIGHT PARTS STORAGE CABINETS CONTENTS TO INCLUDE : SHRINK TUBES, TERMINALS, RETAINING RINGS, SOCKET HEAD SCREWS, BUTTON SCREWS, THREAD REPAIR, SPRING PINS, WOOD DRIFTS, GREASE FITTINGS DYNA SYSTEMS	🔒 Subscribe
			ROLLING TOOL BOX WITH LARGE WRENCHES AND 8-INCH BENCH VISE	🔒 Subscribe
2005	RAPID	611-SRE	2005 RAPID 611-SRE GRANULATOR S/N 70674.002 2005 · RAPID · 611-SRE	🔒 Subscribe
2000	NISSUI	SA-36	2000 NISSUI SA-36 SCREENLESS LOW SPEED GRANULATOR / CUTTER S/N: SA3600512 2000 · NISSUI · SA-36	🔒 Subscribe
2005	RAPID	611-SRE	2005 RAPID 611-SRE GRANULATOR S/N 70005.002 2005 · RAPID · 611-SRE	🔒 Subscribe
	LYON		5 DRAWER LYON STORAGE CABINET WITH ASSORTED BLANK SNAP RINGS LYON	🔒 Subscribe
	LYON		5 DRAWER LYON STORAGE CABINET LYON	🔒 Subscribe

Year	Make	Model	Description	Price
	PH HYDRAULICS	OGF-50	PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5'' @1990 MAX PSI, STROKE 0-24'' MAX, DAYLIGHT OPENING 30'', THROAT DEPTH 15'', BED AREA 30'' X 27'', POWER UNIT 20 HP, 1750 RPM MOTOR, APPROXIMATE WEIGHT 9,800 LBS, OVERALL DIMENSIONS 48'' X 80'' X 109'', 150 GALLONS, FLUID : MOBILE DTE 26 S/N SWC-008 - 34316	🔒 Subscribe
	PH HYDRAULICS	OGF-50	PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5 INCHES @1990 MAX PSI, STROKE 0-24 INCHES MAX, DAYLIGHT OPENING 30 INCHES, THROAT DEPTH 15 INCHES, BED AREA 30 X 27 INCHES, POWER UNIT 20 HP, 1750 RPM MOTOR, APPROXIMATE WEIGHT 9,800 LBS, OVERALL DIMENSIONS 48 X 80 X 109 INCHES, 150 GALLONS, FLUID : MOBILE DTE 26 S/N: SWG-009 - 61314	🔒 Subscribe
	ACER DYNAMIC	1760 G	ACER DYNAMIC 1760 G 17 INCH HIGH SPEED ENGINE LATHE, 50-1800 RPM, 10 INCH 3 JAW CHUCK, STEADY REST, TAILSTOCK, TOOL POST S/N: 11101	🔒 Subscribe
2008	MULTIPLES	M5P-15	2008 MULTIPLES M5P-15 HYDRAULIC PRESS, 15 TON, 4.0'' BORE, MAX OPERATING PRESSURE 2,387 PSI, PUMP OUTPUT REXROTH 9 GPM, RESERVOIR FLUID 23 GALLONS, HYDRAULIC FLUID DTE 26, 460 VOLTAGE, 3 PHASE, 60 HZ S/N: M-5896	🔒 Subscribe
1996	GREENERD	HPB-15	1996 GREENERD HPB-15 HYDRAULIC PRESS 15 TON MAX CAPACITY, 8 INCH MAX STROKE, MAX DAYLIGHT 14 INCH, BED AREA 18 INCH X 11 INCH, RAM AREA 12 INCH X 6 INCH, 9 INCH THROAT, CYLINDER 4.0 INCH BORE, RAM ROD 2.5 INCH DIA., 5 HP, 1725 RPM, 230/460 VOLT, 13.2 AMP, 6.8 AMP S/N: 96T510	🔒 Subscribe
	PH HYDRAULICS	OGF-50	PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5'' @1990 MAX PSI, STROKE 0-24'' MAX, DAYLIGHT OPENING 30'', THROAT DEPTH 15'', BED AREA 30'' X 27'', POWER UNIT 20 HP, 1750 RPM MOTOR, APPROXIMATE WEIGHT 9,800 LBS, OVERALL DIMENSIONS 48'' X 80'' X 109'', 150 GALLONS, FLUID : MOBILE DTE 26 S/N: INS-008 - 61315	🔒 Subscribe
2018	ORBITFORM	P-845	2018 ORBITFORM P-845 HEAD FORMING CAPACITY .840'', MAX STROKE 2.5'', MAX THRUST 12,700 LBS @ 100 PSI, WEIGHT 1200 LBS, WIDTH 16'', DEPTH 26.75'', THROAT DEPTH 9.0'', HEIGHT 56'', BASE HEIGHT 6'' 480 VOLTAGE, 3 PHASE, 60 HZ, 3.5A MAX FLA, MAIN FUSE LP-CC-10, LARGEST LOAD 3 AMPS, SCCR RATED 100KA, HMI CONTROL S/N: 51988	🔒 Subscribe
	PARKER	KARRY KRIMP	PARKER HYDRAULIC KARRY KRIMP BENCH MOUNT HOSE CRIMPING SYSTEM AND CHOP SAW	🔒 Subscribe
	LINCOLN ELECTRIC	MIG 300	LINCOLN ELECTRIC MIG 300 NO TANKS	🔒 Subscribe
	ALLIANT	949-3V	ALLIANT 949-3V VERTICAL MILLING MACHINE WITH POWER FEED, SONY LH51 DIGITAL READ OUT, TABLE SIZE 9 X 49 INCH T-SLOTTED TABLE S/N: 2716	🔒 Subscribe
	MILLER	MILLERMATIC 251	MILLER MILLERMATIC 251 WIRE WELDER, SINGLE-PHASE MIG/FLUX-CORED WELDER, PROCESSES MIG (GMAW), FLUX-CORED (FCAW), OUTPUT CURRENT TYPE DC, MAXIMUM AMPERAGE RANGE 30 - 300 AMPS DC, RATED OUTPUT @ 60% DUTY CYCLE 200 AMPS @ 28 VDC, RATED OUTPUT @ 40% DUTY CYCLE 250 AMPS @ 28 VDC, MAX MATERIAL THICKNESS (SINGLE PASS) 1/2 INCH MILD STEEL, WIRE FEED SPEED RANGE 25 TO 700 IPM, INPUT POWER 200/230 V, SINGLE PHASE, 60 HZ, DIGITAL METERS, WIRE CAPACITY 0.023 INCH TO 0.045 INCH, APPROXIMATE WEIGHT 215 LBS, NO TANKS S/N	🔒 Subscribe
	LYON		18 DRAWER LYON STORAGE CABINET WITH ASSORTED SIZE AND SHAPE HYDRAULIC FITTINGS	🔒 Subscribe
			3 HOSE RACKS WITH (6) SPOOLS OF HOSE	🔒 Subscribe
	MILLER	CP-300	MILLER CP-300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE WITH MILLER S-22A 24 VOLT CONSTANT SPEED WIRE FEEDER S/N KE607663	🔒 Subscribe
	LYON		11 DRAWER LYON STORAGE CABINET	🔒 Subscribe
	LINCOLN ELECTRIC	SP-125 PLUS	LINCOLN ELECTRIC SP-125 PLUS NO TANKS S/N U1990833932	🔒 Subscribe
	WATERLOO	24 DRAWER ROLLING TOOL BOX	WATERLOO 24 DRAWER ROLLING TOOL BOX WITH CONTENTS TO INCLUDE : CARBIDE INSERTS, TAPS, DIES, ROUGHING MILLS, LATHE TOOLING BARS, AND TOOL HOLDERS	🔒 Subscribe
	WILTON	4200	25 METALWORKING COMBINATION DISC/BELT GRINDER, 12 INCH DISC AND 6 INCH X 40 INCH BELT S/N: 33657	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 49 INCH X 44 INCH	🔒 Subscribe
			15 DRAWER ROLLING TOOL BOX WITH CONTENTS	🔒 Subscribe
			HYDRO ASSEMBLY CELL	🔒 Subscribe
	RAPID	F-14 MULTI CUTTER GRANULATOR	RAPID F-14 MULTI CUTTER GRANULATOR 460 VOLTS, 12 FLA, 60 HZ, 3 PHASE S/N: RA-390.148926.10.1	🔒 Subscribe
	DESMA	968.400 ZO B750	500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-133	🔒 Subscribe
2003	DESMA	.400 ZO B750	2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDER NO. 803566, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-135	🔒 Subscribe
2003	DESMA	.400 ZO B750	2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-141	🔒 Subscribe
			STEEL WELDING BENCH WITH 6 INCH TABLE VISE, TABLE SIZE 120 INCH X 48 INCH X 37 INCH TALL	🔒 Subscribe
	MILWAUKEE		MILWAUKEE 3/4'' ELECTROMAGNETIC DRILL PRESS CHUCK CAPACITY 3/4'', MAX TAPPING CAPACITY 1''-14 THREADED HOLES, MOTOR AMPERAGE 11.5 AMPS DRILL POINT PRESSURE (MAX FORCE) 1,630 LBS TO 1,670 LBS, ON 1'' STEEL PLATE) SPINDLE SPEED (LOW RANGE)350 RPM (GEARED FOR HIGH TORQUE)SPINDLE SPEED (HIGH RANGE) VOLTAGE 120 AC DRILL TRAVEL (STROKE) 5'' S/N: 502A196171031	🔒 Subscribe
			(2) GAGE BLOCK SETS AND PARTS BLOCKS	🔒 Subscribe
	BROWN AND SHARPE	TESA-HITE 350	BROWN AND SHARPE TESA-HITE 350 DIGITAL HEIGHT GAUGE 14 INCH HEIGHT CAPACITY RANGE S/N: 8E03302	🔒 Subscribe
2007	RAPID	MC-18	2007 RAPID MC-18 MULTI CUTTER GRANULATOR S/N: 48067	🔒 Subscribe
2003	DESMA	.400 ZO B750	2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-148	🔒 Subscribe
	DESMA	968.400 ZO B750	DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE, EUROMAP SIZE 4500-14000, INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-121	🔒 Subscribe
2002	DESMA	.400 ZO B750	2002 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDER NO. 803013, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-131	🔒 Subscribe
2003	DESMA	.400 ZO B750	2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-136	🔒 Subscribe
2003	DESMA	968.400 ZO B750	2003 DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460, 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-142	🔒 Subscribe
2004	DESMA	968.400 ZO B750	2004 DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460 , 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-142	🔒 Subscribe
2002	DESMA	.400 ZO B750	2002 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDER NO. 803014, EUROMAP SIZE 4500-14000 INJECTION VOLUME 403 CUBIC INCHES, INJECTION PRESSURE 29,870 PSI, CLAMPING FORCE 505.8 TONS, AUX. CLAMPING FORCE 56.2 TONS, PUMP PRESSURE 4105 PSI, PUMP FLOW RATE 33.3 GPM, COOLING WATER FLOW 7.05 GPM, COOLING WATER MAX TEMP 68 DEGREES F, COMPRESSED AIR PRESSURE 87-116 PSI, COMPRESSED AIR CONSUMPTION 17.7 CFM, DRIVE POWER 48.3 HP, TOTAL POWER CONSUMPTION 90 HP TOTAL DRAW, VOLTAGE 460 , 3 PHASE, 60 HZ, MOTOR CURRENT 72 AMPS, POWER CONSUMPTION 172 AMPS, PRIMARY FUSE 200 AMPS FUSE, MACHINE WEIGHT 37,480 LBS, WITH DESMA DRC 2000 CONTROLLER S/N: PRS-129	🔒 Subscribe
	SOUTHWORTH		SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH	🔒 Subscribe
			HYDRO ASSEMBLY CELL 6 WITH KEYENCE LASER MARKER, SIEMENS CONTROLS/PLC	🔒 Subscribe
	HAHN	ASSEMBLY CELL	HAHN ASSEMBLY CELL (2) INCLINED HOPPER/FEEDERS, CONVEYOR SIZE 24 INCH X 12FT, (2) PARTS HOPPERS 12 INCH X 5FT	🔒 Subscribe
	DYNA SYSTEMS		(3) DYNA SYSTEMS UPRIGHT PARTS STORAGE CABINETS CONTENTS TO INCLUDE : SHRINK TUBES, TERMINALS, RETAINING RINGS, SOCKET HEAD SCREWS, BUTTON SCREWS, THREAD REPAIR, SPRING PINS, WOOD DRIFTS, GREASE FITTINGS	🔒 Subscribe
			ROLLING TOOL BOX WITH LARGE WRENCHES AND 8-INCH BENCH VISE	🔒 Subscribe
2005	RAPID	611-SRE	2005 RAPID 611-SRE GRANULATOR S/N 70674.002	🔒 Subscribe
2000	NISSUI	SA-36	2000 NISSUI SA-36 SCREENLESS LOW SPEED GRANULATOR / CUTTER S/N: SA3600512	🔒 Subscribe
2005	RAPID	611-SRE	2005 RAPID 611-SRE GRANULATOR S/N 70005.002	🔒 Subscribe
	LYON		5 DRAWER LYON STORAGE CABINET WITH ASSORTED BLANK SNAP RINGS	🔒 Subscribe
	LYON		5 DRAWER LYON STORAGE CABINET	🔒 Subscribe

PH HYDRAULICS OGF-50

PRESSES & FORMING

PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5'' @1990 MAX PSI, STROKE 0-24'...

Hammer Price: 🔒

PH HYDRAULICS OGF-50

PRESSES & FORMING

PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5 INCHES @1990 MAX PSI, STROKE ...

Hammer Price: 🔒

ACER DYNAMIC 1760 G

METALWORKING & FABRICATION EQUIPMENT

ACER DYNAMIC 1760 G 17 INCH HIGH SPEED ENGINE LATHE, 50-1800 RPM, 10 INCH 3 JAW CHUCK, STEADY REST, ...

Hammer Price: 🔒

2008 MULTIPLES M5P-15

PRESSES & FORMING

2008 MULTIPLES M5P-15 HYDRAULIC PRESS, 15 TON, 4.0'' BORE, MAX OPERATING PRESSURE 2,387 PSI, PUMP OU...

Hammer Price: 🔒

1996 GREENERD HPB-15

PRESSES & FORMING

1996 GREENERD HPB-15 HYDRAULIC PRESS 15 TON MAX CAPACITY, 8 INCH MAX STROKE, MAX DAYLIGHT 14 INCH, B...

Hammer Price: 🔒

PH HYDRAULICS OGF-50

PRESSES & FORMING

PH HYDRAULICS 50 TON OGF-50 HYDRAULIC GAP FRAME PRESS RAM DIAMETER 5.5'' @1990 MAX PSI, STROKE 0-24'...

Hammer Price: 🔒

2018 ORBITFORM P-845

METALWORKING & FABRICATION EQUIPMENT

2018 ORBITFORM P-845 HEAD FORMING CAPACITY .840'', MAX STROKE 2.5'', MAX THRUST 12,700 LBS @ 100 PSI...

Hammer Price: 🔒

PARKER KARRY KRIMP

METALWORKING & FABRICATION EQUIPMENT

PARKER HYDRAULIC KARRY KRIMP BENCH MOUNT HOSE CRIMPING SYSTEM AND CHOP SAW...

Hammer Price: 🔒

LINCOLN ELECTRIC MIG 300

WELDING & CUTTING

LINCOLN ELECTRIC MIG 300 NO TANKS...

Hammer Price: 🔒

ALLIANT 949-3V

METALWORKING & FABRICATION EQUIPMENT

ALLIANT 949-3V VERTICAL MILLING MACHINE WITH POWER FEED, SONY LH51 DIGITAL READ OUT, TABLE SIZE 9 X ...

Hammer Price: 🔒

MILLER MILLERMATIC 251

WELDING & CUTTING

MILLER MILLERMATIC 251 WIRE WELDER, SINGLE-PHASE MIG/FLUX-CORED WELDER, PROCESSES MIG (GMAW), FLUX-C...

Hammer Price: 🔒

LYON

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

18 DRAWER LYON STORAGE CABINET WITH ASSORTED SIZE AND SHAPE HYDRAULIC FITTINGS...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

3 HOSE RACKS WITH (6) SPOOLS OF HOSE...

Hammer Price: 🔒

MILLER CP-300

WELDING & CUTTING

MILLER CP-300 CONSTANT VOLTAGE DC ARC WELDING POWER SOURCE WITH MILLER S-22A 24 VOLT CONSTANT SPEED ...

Hammer Price: 🔒

LYON

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

11 DRAWER LYON STORAGE CABINET...

Hammer Price: 🔒

LINCOLN ELECTRIC SP-125 PLUS

WELDING & CUTTING

LINCOLN ELECTRIC SP-125 PLUS NO TANKS S/N U1990833932...

Hammer Price: 🔒

WATERLOO 24 DRAWER ROLLING TOOL BOX

POWER AND HAND TOOLS

WATERLOO 24 DRAWER ROLLING TOOL BOX WITH CONTENTS TO INCLUDE : CARBIDE INSERTS, TAPS, DIES, ROUGHING...

Hammer Price: 🔒

WILTON 4200

METALWORKING & FABRICATION EQUIPMENT

25 METALWORKING COMBINATION DISC/BELT GRINDER, 12 INCH DISC AND 6 INCH X 40 INCH BELT S/N: 33657...

Hammer Price: 🔒

SOUTHWORTH

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH...

Hammer Price: 🔒

SOUTHWORTH

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH...

Hammer Price: 🔒

SOUTHWORTH

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH...

Hammer Price: 🔒

SOUTHWORTH

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

SOUTHWORTH HYDRAULIC LIFT TABLE 49 INCH X 44 INCH...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

15 DRAWER ROLLING TOOL BOX WITH CONTENTS...

Hammer Price: 🔒

MISC

HYDRO ASSEMBLY CELL...

Hammer Price: 🔒

RAPID F-14 MULTI CUTTER GRANULATOR

PLASTICS PROCESSING EQUIPMENT

RAPID F-14 MULTI CUTTER GRANULATOR 460 VOLTS, 12 FLA, 60 HZ, 3 PHASE S/N: RA-390.148926.10.1...

Hammer Price: 🔒

DESMA 968.400 ZO B750

PLASTICS PROCESSING EQUIPMENT

500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EUROMAP SIZE 4500-14000 INJE...

Hammer Price: 🔒

2003 DESMA .400 ZO B750

PLASTICS PROCESSING EQUIPMENT

2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDE...

Hammer Price: 🔒

2003 DESMA .400 ZO B750

PLASTICS PROCESSING EQUIPMENT

2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EURO...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

STEEL WELDING BENCH WITH 6 INCH TABLE VISE, TABLE SIZE 120 INCH X 48 INCH X 37 INCH TALL...

Hammer Price: 🔒

MILWAUKEE

METALWORKING & FABRICATION EQUIPMENT

MILWAUKEE 3/4'' ELECTROMAGNETIC DRILL PRESS CHUCK CAPACITY 3/4'', MAX TAPPING CAPACITY 1''-14 THREAD...

Hammer Price: 🔒

TEST, MEASUREMENT & QUALITY EQUIPMENT

(2) GAGE BLOCK SETS AND PARTS BLOCKS...

Hammer Price: 🔒

BROWN AND SHARPE TESA-HITE 350

TEST, MEASUREMENT & QUALITY EQUIPMENT

BROWN AND SHARPE TESA-HITE 350 DIGITAL HEIGHT GAUGE 14 INCH HEIGHT CAPACITY RANGE S/N: 8E03302...

Hammer Price: 🔒

2007 RAPID MC-18

PLASTICS PROCESSING EQUIPMENT

2007 RAPID MC-18 MULTI CUTTER GRANULATOR S/N: 48067...

Hammer Price: 🔒

2003 DESMA .400 ZO B750

PLASTICS PROCESSING EQUIPMENT

2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EURO...

Hammer Price: 🔒

DESMA 968.400 ZO B750

PLASTICS PROCESSING EQUIPMENT

DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE, EUROMAP SIZE 4500-14000, IN...

Hammer Price: 🔒

2002 DESMA .400 ZO B750

PLASTICS PROCESSING EQUIPMENT

2002 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDE...

Hammer Price: 🔒

2003 DESMA .400 ZO B750

PLASTICS PROCESSING EQUIPMENT

2003 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, EURO...

Hammer Price: 🔒

2003 DESMA 968.400 ZO B750

PLASTICS PROCESSING EQUIPMENT

2003 DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, E...

Hammer Price: 🔒

2004 DESMA 968.400 ZO B750

PLASTICS PROCESSING EQUIPMENT

2004 DESMA 968.400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, E...

Hammer Price: 🔒

2002 DESMA .400 ZO B750

PLASTICS PROCESSING EQUIPMENT

2002 DESMA .400 ZO B750 500 TON VERTICAL RUBBER INJECTION MOLDING MACHINE TYPE 968.400 ZO B750, ORDE...

Hammer Price: 🔒

SOUTHWORTH

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

SOUTHWORTH HYDRAULIC LIFT TABLE 50 INCH X 50 INCH...

Hammer Price: 🔒

MISC

HYDRO ASSEMBLY CELL 6 WITH KEYENCE LASER MARKER, SIEMENS CONTROLS/PLC...

Hammer Price: 🔒

HAHN ASSEMBLY CELL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

HAHN ASSEMBLY CELL (2) INCLINED HOPPER/FEEDERS, CONVEYOR SIZE 24 INCH X 12FT, (2) PARTS HOPPERS 12 I...

Hammer Price: 🔒

DYNA SYSTEMS

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(3) DYNA SYSTEMS UPRIGHT PARTS STORAGE CABINETS CONTENTS TO INCLUDE : SHRINK TUBES, TERMINALS, RETAI...

Hammer Price: 🔒

POWER AND HAND TOOLS

ROLLING TOOL BOX WITH LARGE WRENCHES AND 8-INCH BENCH VISE...

Hammer Price: 🔒

2005 RAPID 611-SRE

PLASTICS PROCESSING EQUIPMENT

2005 RAPID 611-SRE GRANULATOR S/N 70674.002...

Hammer Price: 🔒

2000 NISSUI SA-36

PLASTICS PROCESSING EQUIPMENT

2000 NISSUI SA-36 SCREENLESS LOW SPEED GRANULATOR / CUTTER S/N: SA3600512...

Hammer Price: 🔒

2005 RAPID 611-SRE

PLASTICS PROCESSING EQUIPMENT

2005 RAPID 611-SRE GRANULATOR S/N 70005.002...

Hammer Price: 🔒

LYON

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

5 DRAWER LYON STORAGE CABINET WITH ASSORTED BLANK SNAP RINGS...

Hammer Price: 🔒

LYON

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

5 DRAWER LYON STORAGE CABINET...

Hammer Price: 🔒

1 2 3 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

BOGE Rubber Plastics

Save to Project Folder

Print Options

Save to Project Folder