Machine Tool Auction NC FL

CLT Auctions

Category: CNC MACHINE CENTERS

Total Lots: 295

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 295 lots

Year	Make	Model	Lot Description	Hammer Price
	TORMACH	PCNC1100	TORMACH PCNC1100 CNC MILLING MACHINE TORMACH MACH WINDOWS BASED CONTROLLER/CPU 9.5" X 33.5" TABLE, QUICK CHANGE SPINDLE, PROGRAMABLE COOLANT, AUTOMATIC TOOL CHANGER. TORMACH · PCNC1100	🔒 Subscribe
	HARDINGE	HLV-H	HARDINGE HLV-H PRECISION TOOL ROOM LATHE 11" X 18" CAPACITY. APRON MOTOR & DRIVE WERE RECENTLY REBUILT BY BABIN MACHINE TOOL, THE MOTOR WAS SLUGGISH AT LOW FEED SPEEDS 230V/3HP HARDINGE · HLV-H	🔒 Subscribe
1997	HAAS	HL4	1997 HAAS HL4 CNC LATHE MAX SWING OVER BED: 24", MAX SWING OVER CROSS SLIDE: 9.5" MAX TURNING DIAMETER: 14.5", MAX TURNING LENGTH: 34" SPINDLE SPEEDS: 3,500 MAX RPM, SPINDLE DRIVE: 30 HP, SPINDLE NOSE: A2-6 HOLE THRU SPINDLE: 3.00" HOLE THRU DRAW TUBE: 2.56", TURRET CAPACITY: 12 STATIONS TURRET TRAVELS (X,Z): 8.6" / 34", RAPID TRAVERSE RATE (X/Z): 700 IPM, TURRET INDEX TIME: 1 SECOND TOOL TO TOOL MAX CENTER DISTANCE: 39" MAX BAR CAPACITY: 2.5" TAILSTOCK?: YES TAILSTOCK TRAVEL: 33.5" 1997 · HAAS · HL4	🔒 Subscribe
2017	BRIDGEPORT		2017 BRIDGEPORT VERTICAL MILL W/ 2-AXIS PROTO TRAC EDGE CNC 9" X 42" TABLE, 2HP R-8 SPINDLE 2017 · BRIDGEPORT	🔒 Subscribe
	KENT	KTM-3VKF	KENT KTM-3VKF 3 AXIS CNC VERTICAL MILLING MACHINE ACU-RITE CONTROLLER TABLE SIZE: 50" X 10" VFD HEAD ELECTRIC 3HP, 220/400/3PH R - 8 SPINDLE, POWER DRAWBAR, PNEUMATIC COLLET CLOSER, 6 INCH VISE WITH SWIVEL BASE. S/N: 9310102 KENT · KTM-3VKF	🔒 Subscribe
	ACER	ULTIMA 3VS	ACER ULTIMA 3VS VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X AXIS POWER FEED R-8 SPINDLE NEWALL SAPPHIRE DRO 3HP/220/440/3PH ACER · ULTIMA 3VS	🔒 Subscribe
	ACER	DYNAMIC 1340G	ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/3PH ACER · DYNAMIC 1340G	🔒 Subscribe
	ACER	ULTIMA 3VS	ACER ULTIMA 3VS VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X AXIS POWER FEED R-8 SPINDLE NEWALL SAPPHIRE DRO 3HP/220/440/3PH ACER · ULTIMA 3VS	🔒 Subscribe
	ACER	DYNAMIC 1340G	ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/3PH ACER · DYNAMIC 1340G	🔒 Subscribe
	ACER	DYNAMIC 1340G	ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/3PH ACER · DYNAMIC 1340G	🔒 Subscribe
1998	HAAS	VF-E	1998 HAAS VF-E MACHINING CENTER W/ 4TH AXIS. TABLE SIZE: 26" X 14", TABLE LOAD CAPACITY: 2500 LBS, Z-AXIS TRAVEL: 20", Y-AXIS TRAVEL: 16", X-AXIS TRAVEL: 20", SPINDLE TAPER: 40, SPINDLE MOTOR: 15 HP, SPINDLE SPEED: 7,500 RPM, MACHINE DIMENSIONS L X W X H: 104" X 88" X 93". S/N: 13091 1998 · HAAS · VF-E	🔒 Subscribe
			40', HIGH CUBE STORAGE CONTAINER/CONEX CLT CAN NOT LOAD THIS CONTAINER, IT HAS GOOD ACCESS FOR A TRUCK TO BACK UP TO IT.	🔒 Subscribe
	DECKEL	FP2	DECKEL FP2 UNIVERSAL MILLING MACHINE INCLUDES SHAPING HEAD & ACCESSORIES AND TOOLING SHOWN IN THE PICTURES. 230V/3PH COPIED SPECS X X Y X Z STROKES: 400 X 200 X 400 [MM] - RAM MANUAL STROKE: 100 [MM], - TABLE SURFACE: 700 X 300 [MM] - MOTOR POWER: 2,2 [KW] - SPINDLE SPEED: 18, FROM 40 TO 2000 [RPM] - SPINDLE NOSE: CN 40 DECKEL · FP2	🔒 Subscribe
	BRIDGEPORT ROMI	TORMAX 13.5	BRIDGEPORT ROMI TORMAX 13.5 ENGINE LATHE 13" X 40", 50 - 2500 RPM, D1-4" CAMLOC SPINDLE 5HP/208V/3PH BRIDGEPORT ROMI · TORMAX 13.5	🔒 Subscribe
	BRIDGEPORT ROMI	TORMAX 13.5	BRIDGEPORT ROMI TORMAX 13.5 ENGINE LATHE 13" X 40", 50 - 2500 RPM, D1-4" CAMLOC SPINDLE 5HP/208V/3PH BRIDGEPORT ROMI · TORMAX 13.5	🔒 Subscribe
	ACRA	XJ5523	ACRA XJ5523 VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X & Z POWER FEEDS, R-8 SPINDLE 230V/3PH ACRA · XJ5523	🔒 Subscribe
	STARTRITE	VOLANT 18	STARTRITE VOLANT 18 VERTICAL BAND SAW 230V/3PH STARTRITE · VOLANT 18	🔒 Subscribe
	TABLE	R-8	WEB VERTICAL MILLING MACHINE TABLE R-8 SPINDLE 220V/3PH TABLE · R-8	🔒 Subscribe
	ROCKWELL	20	ROCKWELL 20 VERTICAL BAND SAW 220V/3PH ROCKWELL · 20	🔒 Subscribe
	BAILEIGH	TN-200E	BAILEIGH TN-200E PIPE NOTCHER, 1PH BAILEIGH · TN-200E	🔒 Subscribe
	LAGUN	FT 1	LAGUN FT 1 VERTICAL MILLING MACHINE 9" X 42" TABLE, HAS XYZ POWER FEEDS. COULDNT TEST X & Y BECAUSE WIRES ARE BARE; Z RUNS BUT IT HAS A BAD GEAR; A NEW GEAR IS INCLUDED 220/440/3PH LAGUN · FT 1	🔒 Subscribe
	MOORE	11	MOORE 11 ROTARY TABLE W/ CABINET SINE TABLE ACCESSORIES ARE INCLUDED, WE DO NOT HAVE THE SINE TABLE MOORE · 11	🔒 Subscribe
	MOORE	NO.3	MOORE NO.3 JIG GRINDER W/ HIGH SPEED GRINDING HEADS TABLE SIZE: 11" X 24" LONGITUDINAL TRAVEL: 18" CROSS TRAVEL: 11" SPINDLE HOUSING VERTICAL TRAVEL: 12-5/8" SPINDLE HEAD VERTICAL TRAVEL: 3-5/8" SPINDLE TO TABLE DISTANCE: 2" - 18" VARIABLE SPINDLE SPEEDS: 25 - 225 RPM VARIABLE SPINDLE FEEDS: 2 - 120 SPM BORE HOLE RANGE: 1/64" - 3-1/2" 220V/3PH MOORE · NO.3	🔒 Subscribe
	GRIZZLY	37	GRIZZLY 37 STOMP SHEAR 37" X 16GA MILD STEEL GRIZZLY · 37	🔒 Subscribe
1995	SWI TRAK	TRM	1995 SWI TRAK TRM 2 AXIS CNC MILLING MACHINE. OVERALL SIZE OF T-SLOTTED TABLE- 10" X 50". 40 NST SPINDLE #MX2 TRAK TWO-AXIS CNC CONTROL UPDATED 11/2015, THREE-AXIS DIGITAL READOUT IN MANUAL MODE, 9" CRT, RS 232 PORT, REMOTE STOP/GO SWITCH. TWO-AXIS CNC MACHINING OR HAND-WHEELS FOR MANUAL OPERATION. INFINITELY VARIABLE SPINDLE SPEEDS TO 4,200 R.P.M. 3HP/220/440/3PH WIRED LOW VOLTAGE. 1995 · SWI TRAK · TRM	🔒 Subscribe
	KEARNEY & TRECKER	10 HP 3CH	KEARNEY & TRECKER 10 HP 3CH HORIZONTAL MILLING MACHINE KEARNEY & TRECKER · 10 HP 3CH	🔒 Subscribe
	VICTOR	916	VICTOR 916 HORIZONTAL BAND SAW 2HP/220V/3PH VICTOR · 916	🔒 Subscribe
	FELLOWS	4A VERSA SHAPER	FELLOWS 4A VERSA SHAPER. INCLUDES STEP UP TRANSFORMER. FELLOWS · 4A VERSA SHAPER	🔒 Subscribe
	MOORE	TOOLING CABINET	MOORE TOOLING CABINET 48" X 14" X 44" MOORE · TOOLING CABINET	🔒 Subscribe
	MONARCH	10EE	MONARCH 10EE STEADY REST MONARCH · 10EE	🔒 Subscribe
	MONARCH	10EE	MONARCH 10EE TAPER ATTACHMENT MONARCH · 10EE	🔒 Subscribe
			GEARED HEAD DRILL PRESS	🔒 Subscribe
			FLEX ARM TAPPER	🔒 Subscribe
	HARDINGE		HARDINGE TAPER PIN INDEXER W/ PLATES HARDINGE	🔒 Subscribe
	COOLEY	VK 3	COOLEY VK 3 1750 DEGREE OVEN COOLEY · VK 3	🔒 Subscribe
	KEMPER	6210014	KEMPER 6210014 MOBILE WELDING FUME EXTRACTOR KEMPER · 6210014	🔒 Subscribe
	WILTON	8"	WILTON 8" VISE WILTON · 8"	🔒 Subscribe
	KASHIFUJI	KR-601	KASHIFUJI KR-601 UNIVERSAL GEAR HOBBING MACHINE COMES W/ THE TOOLING SHOWN IN THE PICTURES 230/460/3PH KASHIFUJI · KR-601	🔒 Subscribe
			SCAFFOLDING W/ CASERS & WALK BOARD	🔒 Subscribe
	ROCKWELL		ROCKWELL TURRET LATHE ROCKWELL	🔒 Subscribe
	MITUTOYO	PH350H	MITUTOYO PH350H PROFILE PROJECTOR MITUTOYO · PH350H	🔒 Subscribe
	ALORIS	CXA	ALORIS CXA TOOL POST W/ HOLDERS ALORIS · CXA	🔒 Subscribe
	WULFTEC	WHP-200	WULFTEC WHP-200 HIGH PROFILE PALLET WRAPPER 120V/15A/1PH WULFTEC · WHP-200	🔒 Subscribe
	HARIG	6" X 12"	HARIG 6" X 12" HAND FEED SURFACE GRINDER HARIG · 6" X 12"	🔒 Subscribe
	DELTA	17-990X	DELTA 17-990X 16.5" DRILL PRESS 3/4HP/1PH DELTA · 17-990X	🔒 Subscribe
	MOORE	NO.3	MOORE NO.3 JIG BORER W/ ALNILAM DRO 220V/3PH MOORE · NO.3	🔒 Subscribe
	DORIAN		DORIAN TOOL RIGHT ANGLE HEAD W/ ARBOR & SUPPORT DORIAN	🔒 Subscribe
	YUASA	PNEUMATIC SUPER SPACER	YUASA PNEUMATIC SUPER SPACER YUASA · PNEUMATIC SUPER SPACER	🔒 Subscribe
	MOORE	NO.3	MOORE NO.3 JIG BORER 230V/3PH MOORE · NO.3	🔒 Subscribe
			5C COLLETS	🔒 Subscribe

Year	Make	Model	Description	Price
	TORMACH	PCNC1100	TORMACH PCNC1100 CNC MILLING MACHINE TORMACH MACH WINDOWS BASED CONTROLLER/CPU 9.5" X 33.5" TABLE, QUICK CHANGE SPINDLE, PROGRAMABLE COOLANT, AUTOMATIC TOOL CHANGER.	🔒 Subscribe
	HARDINGE	HLV-H	HARDINGE HLV-H PRECISION TOOL ROOM LATHE 11" X 18" CAPACITY. APRON MOTOR & DRIVE WERE RECENTLY REBUILT BY BABIN MACHINE TOOL, THE MOTOR WAS SLUGGISH AT LOW FEED SPEEDS 230V/3HP	🔒 Subscribe
1997	HAAS	HL4	1997 HAAS HL4 CNC LATHE MAX SWING OVER BED: 24", MAX SWING OVER CROSS SLIDE: 9.5" MAX TURNING DIAMETER: 14.5", MAX TURNING LENGTH: 34" SPINDLE SPEEDS: 3,500 MAX RPM, SPINDLE DRIVE: 30 HP, SPINDLE NOSE: A2-6 HOLE THRU SPINDLE: 3.00" HOLE THRU DRAW TUBE: 2.56", TURRET CAPACITY: 12 STATIONS TURRET TRAVELS (X,Z): 8.6" / 34", RAPID TRAVERSE RATE (X/Z): 700 IPM, TURRET INDEX TIME: 1 SECOND TOOL TO TOOL MAX CENTER DISTANCE: 39" MAX BAR CAPACITY: 2.5" TAILSTOCK?: YES TAILSTOCK TRAVEL: 33.5"	🔒 Subscribe
2017	BRIDGEPORT		2017 BRIDGEPORT VERTICAL MILL W/ 2-AXIS PROTO TRAC EDGE CNC 9" X 42" TABLE, 2HP R-8 SPINDLE	🔒 Subscribe
	KENT	KTM-3VKF	KENT KTM-3VKF 3 AXIS CNC VERTICAL MILLING MACHINE ACU-RITE CONTROLLER TABLE SIZE: 50" X 10" VFD HEAD ELECTRIC 3HP, 220/400/3PH R - 8 SPINDLE, POWER DRAWBAR, PNEUMATIC COLLET CLOSER, 6 INCH VISE WITH SWIVEL BASE. S/N: 9310102	🔒 Subscribe
	ACER	ULTIMA 3VS	ACER ULTIMA 3VS VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X AXIS POWER FEED R-8 SPINDLE NEWALL SAPPHIRE DRO 3HP/220/440/3PH	🔒 Subscribe
	ACER	DYNAMIC 1340G	ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/3PH	🔒 Subscribe
	ACER	ULTIMA 3VS	ACER ULTIMA 3VS VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X AXIS POWER FEED R-8 SPINDLE NEWALL SAPPHIRE DRO 3HP/220/440/3PH	🔒 Subscribe
	ACER	DYNAMIC 1340G	ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/3PH	🔒 Subscribe
	ACER	DYNAMIC 1340G	ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/3PH	🔒 Subscribe
1998	HAAS	VF-E	1998 HAAS VF-E MACHINING CENTER W/ 4TH AXIS. TABLE SIZE: 26" X 14", TABLE LOAD CAPACITY: 2500 LBS, Z-AXIS TRAVEL: 20", Y-AXIS TRAVEL: 16", X-AXIS TRAVEL: 20", SPINDLE TAPER: 40, SPINDLE MOTOR: 15 HP, SPINDLE SPEED: 7,500 RPM, MACHINE DIMENSIONS L X W X H: 104" X 88" X 93". S/N: 13091	🔒 Subscribe
			40', HIGH CUBE STORAGE CONTAINER/CONEX CLT CAN NOT LOAD THIS CONTAINER, IT HAS GOOD ACCESS FOR A TRUCK TO BACK UP TO IT.	🔒 Subscribe
	DECKEL	FP2	DECKEL FP2 UNIVERSAL MILLING MACHINE INCLUDES SHAPING HEAD & ACCESSORIES AND TOOLING SHOWN IN THE PICTURES. 230V/3PH COPIED SPECS X X Y X Z STROKES: 400 X 200 X 400 [MM] - RAM MANUAL STROKE: 100 [MM], - TABLE SURFACE: 700 X 300 [MM] - MOTOR POWER: 2,2 [KW] - SPINDLE SPEED: 18, FROM 40 TO 2000 [RPM] - SPINDLE NOSE: CN 40	🔒 Subscribe
	BRIDGEPORT ROMI	TORMAX 13.5	BRIDGEPORT ROMI TORMAX 13.5 ENGINE LATHE 13" X 40", 50 - 2500 RPM, D1-4" CAMLOC SPINDLE 5HP/208V/3PH	🔒 Subscribe
	BRIDGEPORT ROMI	TORMAX 13.5	BRIDGEPORT ROMI TORMAX 13.5 ENGINE LATHE 13" X 40", 50 - 2500 RPM, D1-4" CAMLOC SPINDLE 5HP/208V/3PH	🔒 Subscribe
	ACRA	XJ5523	ACRA XJ5523 VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X & Z POWER FEEDS, R-8 SPINDLE 230V/3PH	🔒 Subscribe
	STARTRITE	VOLANT 18	STARTRITE VOLANT 18 VERTICAL BAND SAW 230V/3PH	🔒 Subscribe
	TABLE	R-8	WEB VERTICAL MILLING MACHINE TABLE R-8 SPINDLE 220V/3PH	🔒 Subscribe
	ROCKWELL	20	ROCKWELL 20 VERTICAL BAND SAW 220V/3PH	🔒 Subscribe
	BAILEIGH	TN-200E	BAILEIGH TN-200E PIPE NOTCHER, 1PH	🔒 Subscribe
	LAGUN	FT 1	LAGUN FT 1 VERTICAL MILLING MACHINE 9" X 42" TABLE, HAS XYZ POWER FEEDS. COULDNT TEST X & Y BECAUSE WIRES ARE BARE; Z RUNS BUT IT HAS A BAD GEAR; A NEW GEAR IS INCLUDED 220/440/3PH	🔒 Subscribe
	MOORE	11	MOORE 11 ROTARY TABLE W/ CABINET SINE TABLE ACCESSORIES ARE INCLUDED, WE DO NOT HAVE THE SINE TABLE	🔒 Subscribe
	MOORE	NO.3	MOORE NO.3 JIG GRINDER W/ HIGH SPEED GRINDING HEADS TABLE SIZE: 11" X 24" LONGITUDINAL TRAVEL: 18" CROSS TRAVEL: 11" SPINDLE HOUSING VERTICAL TRAVEL: 12-5/8" SPINDLE HEAD VERTICAL TRAVEL: 3-5/8" SPINDLE TO TABLE DISTANCE: 2" - 18" VARIABLE SPINDLE SPEEDS: 25 - 225 RPM VARIABLE SPINDLE FEEDS: 2 - 120 SPM BORE HOLE RANGE: 1/64" - 3-1/2" 220V/3PH	🔒 Subscribe
	GRIZZLY	37	GRIZZLY 37 STOMP SHEAR 37" X 16GA MILD STEEL	🔒 Subscribe
1995	SWI TRAK	TRM	1995 SWI TRAK TRM 2 AXIS CNC MILLING MACHINE. OVERALL SIZE OF T-SLOTTED TABLE- 10" X 50". 40 NST SPINDLE #MX2 TRAK TWO-AXIS CNC CONTROL UPDATED 11/2015, THREE-AXIS DIGITAL READOUT IN MANUAL MODE, 9" CRT, RS 232 PORT, REMOTE STOP/GO SWITCH. TWO-AXIS CNC MACHINING OR HAND-WHEELS FOR MANUAL OPERATION. INFINITELY VARIABLE SPINDLE SPEEDS TO 4,200 R.P.M. 3HP/220/440/3PH WIRED LOW VOLTAGE.	🔒 Subscribe
	KEARNEY & TRECKER	10 HP 3CH	KEARNEY & TRECKER 10 HP 3CH HORIZONTAL MILLING MACHINE	🔒 Subscribe
	VICTOR	916	VICTOR 916 HORIZONTAL BAND SAW 2HP/220V/3PH	🔒 Subscribe
	FELLOWS	4A VERSA SHAPER	FELLOWS 4A VERSA SHAPER. INCLUDES STEP UP TRANSFORMER.	🔒 Subscribe
	MOORE	TOOLING CABINET	MOORE TOOLING CABINET 48" X 14" X 44"	🔒 Subscribe
	MONARCH	10EE	MONARCH 10EE STEADY REST	🔒 Subscribe
	MONARCH	10EE	MONARCH 10EE TAPER ATTACHMENT	🔒 Subscribe
			GEARED HEAD DRILL PRESS	🔒 Subscribe
			FLEX ARM TAPPER	🔒 Subscribe
	HARDINGE		HARDINGE TAPER PIN INDEXER W/ PLATES	🔒 Subscribe
	COOLEY	VK 3	COOLEY VK 3 1750 DEGREE OVEN	🔒 Subscribe
	KEMPER	6210014	KEMPER 6210014 MOBILE WELDING FUME EXTRACTOR	🔒 Subscribe
	WILTON	8"	WILTON 8" VISE	🔒 Subscribe
	KASHIFUJI	KR-601	KASHIFUJI KR-601 UNIVERSAL GEAR HOBBING MACHINE COMES W/ THE TOOLING SHOWN IN THE PICTURES 230/460/3PH	🔒 Subscribe
			SCAFFOLDING W/ CASERS & WALK BOARD	🔒 Subscribe
	ROCKWELL		ROCKWELL TURRET LATHE	🔒 Subscribe
	MITUTOYO	PH350H	MITUTOYO PH350H PROFILE PROJECTOR	🔒 Subscribe
	ALORIS	CXA	ALORIS CXA TOOL POST W/ HOLDERS	🔒 Subscribe
	WULFTEC	WHP-200	WULFTEC WHP-200 HIGH PROFILE PALLET WRAPPER 120V/15A/1PH	🔒 Subscribe
	HARIG	6" X 12"	HARIG 6" X 12" HAND FEED SURFACE GRINDER	🔒 Subscribe
	DELTA	17-990X	DELTA 17-990X 16.5" DRILL PRESS 3/4HP/1PH	🔒 Subscribe
	MOORE	NO.3	MOORE NO.3 JIG BORER W/ ALNILAM DRO 220V/3PH	🔒 Subscribe
	DORIAN		DORIAN TOOL RIGHT ANGLE HEAD W/ ARBOR & SUPPORT	🔒 Subscribe
	YUASA	PNEUMATIC SUPER SPACER	YUASA PNEUMATIC SUPER SPACER	🔒 Subscribe
	MOORE	NO.3	MOORE NO.3 JIG BORER 230V/3PH	🔒 Subscribe
			5C COLLETS	🔒 Subscribe

TORMACH PCNC1100

TORMACH PCNC1100 CNC MILLING MACHINE TORMACH MACH WINDOWS BASED CONTROLLER/CPU 9.5" X 33.5" TABLE, Q...

HARDINGE HLV-H

HARDINGE HLV-H PRECISION TOOL ROOM LATHE 11" X 18" CAPACITY. APRON MOTOR & DRIVE WERE RECENTLY REBUI...

1997 HAAS HL4

1997 HAAS HL4 CNC LATHE MAX SWING OVER BED: 24", MAX SWING OVER CROSS SLIDE: 9.5" MAX TURNING DIAMET...

2017 BRIDGEPORT

2017 BRIDGEPORT VERTICAL MILL W/ 2-AXIS PROTO TRAC EDGE CNC 9" X 42" TABLE, 2HP R-8 SPINDLE...

KENT KTM-3VKF

KENT KTM-3VKF 3 AXIS CNC VERTICAL MILLING MACHINE ACU-RITE CONTROLLER TABLE SIZE: 50" X 10" VFD HEAD...

ACER ULTIMA 3VS

ACER ULTIMA 3VS VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X AXIS POWER FEED R-8 SPINDLE NEWALL...

ACER DYNAMIC 1340G

ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/...

ACER ULTIMA 3VS

ACER ULTIMA 3VS VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X AXIS POWER FEED R-8 SPINDLE NEWALL...

ACER DYNAMIC 1340G

ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/...

ACER DYNAMIC 1340G

ACER DYNAMIC 1340G LATHE W/ NEWALL DRO D1-4" CAMLOC SPINDLE, TAPER ATTACHMENT IN/MM THREADING, 230V/...

1998 HAAS VF-E

1998 HAAS VF-E MACHINING CENTER W/ 4TH AXIS. TABLE SIZE: 26" X 14", TABLE LOAD CAPACITY: 2500 LBS, Z...

40', HIGH CUBE STORAGE CONTAINER/CONEX CLT CAN NOT LOAD THIS CONTAINER, IT HAS GOOD ACCESS FOR A TRU

DECKEL FP2

DECKEL FP2 UNIVERSAL MILLING MACHINE INCLUDES SHAPING HEAD & ACCESSORIES AND TOOLING SHOWN IN THE PI...

BRIDGEPORT ROMI TORMAX 13.5

BRIDGEPORT ROMI TORMAX 13.5 ENGINE LATHE 13" X 40", 50 - 2500 RPM, D1-4" CAMLOC SPINDLE 5HP/208V/3PH...

BRIDGEPORT ROMI TORMAX 13.5

BRIDGEPORT ROMI TORMAX 13.5 ENGINE LATHE 13" X 40", 50 - 2500 RPM, D1-4" CAMLOC SPINDLE 5HP/208V/3PH...

ACRA XJ5523

ACRA XJ5523 VERTICAL MILLING MACHINE W/ DRO 9" X 42" TABLE, X & Z POWER FEEDS, R-8 SPINDLE 230V/3PH...

STARTRITE VOLANT 18

STARTRITE VOLANT 18 VERTICAL BAND SAW 230V/3PH...

TABLE R-8

WEB VERTICAL MILLING MACHINE TABLE R-8 SPINDLE 220V/3PH...

ROCKWELL 20

ROCKWELL 20 VERTICAL BAND SAW 220V/3PH...

BAILEIGH TN-200E

BAILEIGH TN-200E PIPE NOTCHER, 1PH...

LAGUN FT 1

LAGUN FT 1 VERTICAL MILLING MACHINE 9" X 42" TABLE, HAS XYZ POWER FEEDS. COULDNT TEST X & Y BECAUSE ...

MOORE 11

MOORE 11 ROTARY TABLE W/ CABINET SINE TABLE ACCESSORIES ARE INCLUDED, WE DO NOT HAVE THE SINE TABLE...

MOORE NO.3

MOORE NO.3 JIG GRINDER W/ HIGH SPEED GRINDING HEADS TABLE SIZE: 11" X 24" LONGITUDINAL TRAVEL: 18" C...

GRIZZLY 37

GRIZZLY 37 STOMP SHEAR 37" X 16GA MILD STEEL...

1995 SWI TRAK TRM

1995 SWI TRAK TRM 2 AXIS CNC MILLING MACHINE. OVERALL SIZE OF T-SLOTTED TABLE- 10" X 50". 40 NST SPI...

KEARNEY & TRECKER 10 HP 3CH

KEARNEY & TRECKER 10 HP 3CH HORIZONTAL MILLING MACHINE...

VICTOR 916

VICTOR 916 HORIZONTAL BAND SAW 2HP/220V/3PH...

FELLOWS 4A VERSA SHAPER

FELLOWS 4A VERSA SHAPER. INCLUDES STEP UP TRANSFORMER....

MOORE TOOLING CABINET

MOORE TOOLING CABINET 48" X 14" X 44"...

MONARCH 10EE

MONARCH 10EE STEADY REST...

MONARCH 10EE

MONARCH 10EE TAPER ATTACHMENT...

GEARED HEAD DRILL PRESS

FLEX ARM TAPPER

HARDINGE

HARDINGE TAPER PIN INDEXER W/ PLATES...

COOLEY VK 3

COOLEY VK 3 1750 DEGREE OVEN...

KEMPER 6210014

KEMPER 6210014 MOBILE WELDING FUME EXTRACTOR...

WILTON 8"

WILTON 8" VISE...

KASHIFUJI KR-601

KASHIFUJI KR-601 UNIVERSAL GEAR HOBBING MACHINE COMES W/ THE TOOLING SHOWN IN THE PICTURES 230/460/3...

SCAFFOLDING W/ CASERS & WALK BOARD

ROCKWELL

ROCKWELL TURRET LATHE...

MITUTOYO PH350H

MITUTOYO PH350H PROFILE PROJECTOR...

ALORIS CXA

ALORIS CXA TOOL POST W/ HOLDERS...

WULFTEC WHP-200

WULFTEC WHP-200 HIGH PROFILE PALLET WRAPPER 120V/15A/1PH...

HARIG 6" X 12"

HARIG 6" X 12" HAND FEED SURFACE GRINDER...

DELTA 17-990X

DELTA 17-990X 16.5" DRILL PRESS 3/4HP/1PH...

MOORE NO.3

MOORE NO.3 JIG BORER W/ ALNILAM DRO 220V/3PH...

DORIAN

DORIAN TOOL RIGHT ANGLE HEAD W/ ARBOR & SUPPORT...

YUASA PNEUMATIC SUPER SPACER

YUASA PNEUMATIC SUPER SPACER...

MOORE NO.3

MOORE NO.3 JIG BORER 230V/3PH...

5C COLLETS

1 2 3 4 5 6 Next >>

Recent Searches

Login

Reset Password

Machine Tool Auction NC FL

Save to Project Folder

Print Options

Unlock Unlimited Printing