1st Auction of 2026 - Power Tool Dealz!

M18 FUEL 18V Lithium-Ion Brushless Cordless 1/2 in. Impact Wrench with Friction Ring (Tool-Only). The MILWAUKEE M18 FUEL High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with the M18 REDLITHIUM FORGE Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. The patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The Friction Ring design allows for quick & tool-free socket changes. Amperage (A): 0 A. Batteries Included: No. Battery Amp Hours: No Battery. Battery Power Type: Lithium Ion. Battery Size: Battery Not Included. Battery Voltage (V): 18V. Charger Included: Charger Not Included. Color Family: Red. Condition: New. Cordless Tool Type: Impact Wrench. Cordless/Corded: Cordless. Impacts Per Minute: 2400. Included: No Additional Items Included. Maximum Speed (RPM): 2000 RPM. Motor Type: Brushless. Number of Total Batteries Included: 0. Power Tool Features: No Additional Features. Product Weight (lb.): 5.9 lb. Returnable: 90-Day. Tools Product Type: Power Tool. Torque (lb-in): 19200 In lbs. Certifications and Listings: UL Listed. Drive Size (in.): 1/2. Product Depth (in.): 7.6 in. Product Height (in.): 9.35 in. Product Width (in.): 3.13 in. Torque (lb-in): 19200 In lbs. Motor Type: Brushless. Battery Voltage (V): 18V. Cordless/ Corded: Cordless. Drive Size (in.): 1/2"

Milwaukee M18 18V Lithium-Ion Cordless Combo Kit (5-Tool) with (1) 3.0Ah and (1) 1.5Ah Battery, (1) Charger, (1) Tool Bag. Includes: 1/2 in. Drill Driver, 1/4 in. Hex Impact Driver, HACKZALL Recip Saw, 6 1/2 in. Circular Saw and a Work Light. REDLITHIUM power. Patented technologies with an innovative motor design and advanced ergonomics. Battery Power Type: Lithium Ion. Charger Included: Charger Included. Color Family: Red. Condition: New. Cordless Tool Type: Combo Kit. Cordless/Corded: Cordless. Included: Blade(s),Tool Bag. Motor Type: Brushed. Number of Tools (Bonus Tool Not Included): 5. Number of Total Batteries Included: 2. Power Tool Features: Keyless Chuck,LED Light,Variable Speed. Returnable: 90-Day. Tools Included: Circular Saw,Drill,Impact Driver,Reciprocating Saw,Worklight. Tools Product Type: Power Tool. Voltage (V): 18 V. Certifications and Listings: CSA Listed,ETL Listed,UL Listed. Features: Variable Speed. Features: LED Light.

Milwaukee M12 1/2 in. Cordless Brushless Impact Wrench Kit (Battery & Charger). Like New Tested Includes 2 batteries and Charger. The new Milwaukee 1/2 inch stubby impact wrench delivers the most power, is lighter weight and more compact while delivering 50 percent faster application speeds. The Powerstate brushless motor delivers 0-3,000 rpm with up to 550 ft-lbs of nut busting torque, allowing the removal of the most corroded and stubborn applications. This solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with tri led work lights to illuminate your work area without the frustration of shadows. 4 mode drive control for greater precision and customization to your desired power output, including auto shut off that applies no more than 15 ft-lbs of torque for hand tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the rpm once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single handed operation. By shifting the forward reverse shuttle into neutral and double tapping the trigger, you will be able to change modes effortlessly. Kitted with the M12 Redlithium high output xc5.0 and cp2.0 battery pack that delivers 25 percent more power, runs 25 percent cooler, and is chemical resistant to protect against exposure to common oils, greases, and solvents.

Milwaukee M12 FUEL 12V Lithium-Ion Brushless Cordless Subcompact Brushless 2-Tool Combo Kit. Our M12 Subcompact Brushless 4-Piece Combo Kit features the most compact and lightest weight drill and impact driver, a compact and versatile M12 Multi-Tool that gives you up to 25% more runtime than the competition, and a compact and light weight M12 Cordless LITHIUM-ION Recip Saw. This kit includes the M12 Subcompact Brushless 3/8" Drill/Driver, M12 Subcompact Brushless 1/4" Hex Impact Driver, (1) M12 Multi Tool, (1) M12 HACKZALL, (2) M12 REDLITHIUM CP2.0 Battery Packs, M12 Charger and Contractor Bag. The M12 Subcompact Brushless 4-Piece Combo Kit is part of the M12 system, fully compatible with over 150+ solutions. Battery Power Type: Lithium Ion. Charger Included: Charger Included. Color Family: Red. Condition: New. Cordless Tool Type: Combo Kit. Cordless/Corded: Cordless. Included: Battery Included,Charger,Tool Bag. Motor Type: Brushless. Number of Tools (Bonus Tool Not Included): 4. Number of Total Batteries Included: 2. Power Tool Features: Built-In Light,Compact,Keyless Chuck,Reverse,Variable Speed. Returnable: 90-Day. Tools Included: Drill Driver,Impact Driver,Multi-Tool,Reciprocating Saw. Tools Product Type: Power Tool. Voltage (V): 12.0 V. Certifications and Listings: UL Listed.

Milwaukee M12 FUEL 2-Tool Combo Kit Cordless Hammer Drill and Impact Driver w/2 Batteries and Bag. Includes MILWAUKEE M12 FUEL 1/2" Drill Driver, M12 FUEL 1/4" Hex Impact Driver, M12 REDLITHIUM XC 4.0Ah Battery Pack, M12 REDLITHIUM CP 2.0Ah Battery Pack, with an M12 charger and a contractor bag. The M12 FUEL 1/2" Drill/Driver is the Most Powerful Subcompact Drill Driver, the most compact in size, and has the fastest speed under load. The POWERSTATE brushless motor delivers the most power on the widest variety of applications. The portable drill is the shortest solution in its class offering maneuverability and access to tight spaces. MILWAUKEE REDLINK PLUS Intelligence delivers top of the line thermal performance to give users the Fastest Speed Under Load. MILWAUKEE M12 FUEL 1/4" Hex Impact Driver is the Fastest Subcompact Impact Driver, the Most Compact, and provides Maximum Workspace Visibility. At 5" long and 7.6" tall (with M12 CP 2.0 Ah battery), this solution is the most overall compact impact driver in its class. Tri-LEDs surround the bit accessory with brighter lights and fewer shadows providing maximum visibility. Using M12 REDLITHIUM 2.0Ah compact and 4.0Ah extended capacity battery packs will deliver more work per charge. The M12 FUEL Impact Driver and M12 FUEL 1/2" Drill Driver are part of MILWAUKEE M12 System which is fully compatible with over 125 solutions. Most Powerful Subcompact Hammer Drill. Fastest Subcompact Impact Driver. Most Compact Drill and Impact Driver for best access in tight spaces. Fastest Drilling and Driving applications under load. Maximum Workspace Visibility through Tri-LED Work lights on the Impact Driver. 1/2" All-Metal chuck for maximum durability, grip and bit retention. Mechanical Clutch on Drill for consistency in driving a wide range of fasteners. Impact Driver includes 4-Mode Drive Control with dedicated self tapping screw mode. More work per charge with the M12 REDLITHIUM XC4.0 battery pack. All-Metal Gearcase for ultimate durability. Part of the M12 System, featuring over 125+ Tools. Includes: (1) 3404-20 M12 FUEL Hammer Drill Driver Bare Tool, (1) 3453-20 M12 Fuel Impact Driver Bare Tool, (1) M12 Redlithium XC 4.0AH Battery (48-11-2440), (1) M12 Redlithium CP 2.0AH Battery (48-11-2420), (1) M12 Battery Charger (48-59-2401). Motor Type: Brushless. Number of Tools (Bonus Tool Not Included): 2. Number of Total Batteries Included: 2. Cordless/ Corded: Cordless. Features: LED Light. Features: Variable Speed. Features: Built-In Light.

Milwaukee M12 FUEL 2-Tool Combo Kit Cordless Hammer Drill and Impact Driver w/2 Batteries and Bag. Includes MILWAUKEE M12 FUEL 1/2" Drill Driver, M12 FUEL 1/4" Hex Impact Driver, M12 REDLITHIUM XC 4.0Ah Battery Pack, M12 REDLITHIUM CP 2.0Ah Battery Pack, with an M12 charger and a contractor bag. The M12 FUEL 1/2" Drill/Driver is the Most Powerful Subcompact Drill Driver, the most compact in size, and has the fastest speed under load. The POWERSTATE brushless motor delivers the most power on the widest variety of applications. The portable drill is the shortest solution in its class offering maneuverability and access to tight spaces. MILWAUKEE REDLINK PLUS Intelligence delivers top of the line thermal performance to give users the Fastest Speed Under Load. MILWAUKEE M12 FUEL 1/4" Hex Impact Driver is the Fastest Subcompact Impact Driver, the Most Compact, and provides Maximum Workspace Visibility. At 5" long and 7.6" tall (with M12 CP 2.0 Ah battery), this solution is the most overall compact impact driver in its class. Tri-LEDs surround the bit accessory with brighter lights and fewer shadows providing maximum visibility. Using M12 REDLITHIUM 2.0Ah compact and 4.0Ah extended capacity battery packs will deliver more work per charge. The M12 FUEL Impact Driver and M12 FUEL 1/2" Drill Driver are part of MILWAUKEE M12 System which is fully compatible with over 125 solutions. Most Powerful Subcompact Hammer Drill. Fastest Subcompact Impact Driver. Most Compact Drill and Impact Driver for best access in tight spaces. Fastest Drilling and Driving applications under load. Maximum Workspace Visibility through Tri-LED Work lights on the Impact Driver. 1/2" All-Metal chuck for maximum durability, grip and bit retention. Mechanical Clutch on Drill for consistency in driving a wide range of fasteners. Impact Driver includes 4-Mode Drive Control with dedicated self tapping screw mode. More work per charge with the M12 REDLITHIUM XC4.0 battery pack. All-Metal Gearcase for ultimate durability. Part of the M12 System, featuring over 125+ Tools. Includes: (1) 3404-20 M12 FUEL Hammer Drill Driver Bare Tool, (1) 3453-20 M12 Fuel Impact Driver Bare Tool, (1) M12 Redlithium XC 4.0AH Battery (48-11-2440), (1) M12 Redlithium CP 2.0AH Battery (48-11-2420), (1) M12 Battery Charger (48-59-2401). Motor Type: Brushless. Number of Tools (Bonus Tool Not Included): 2. Number of Total Batteries Included: 2. Cordless/ Corded: Cordless. Features: LED Light. Features: Variable Speed. Features: Built-In Light.

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Coil Roofing Nailer (Tool Only) The MILWAUKEE M18 FUEL Coil Roofing Nailer delivers cordless innovation to Roofing and Exterior Contractors through optimized performance, best-in-class runtime, and unmatched versatility. This solution is designed for small roofing jobs and repairs along with the added versatility of vinyl siding installation. By leveraging our nitrogen air spring technology, POWERSTATE Brushless motor, and REDLINK Intelligence, this nailer delivers the performance to seat nails at firing rates of up to 6 nails per second. When paired with the M18 REDLITHIUM HIGH OUTPUT CP3.0 battery pack, this nailer sinks up to 1100 nails per charge, providing best-in-class runtime to maximize productivity. This tool features an attachable vinyl siding tip; increasing versatility to utilize the nailer for vinyl siding installation. The cordless roofing nailer features a pivoting belt/scaffolding hook, tool-free depth of drive adjustment, dry fire lockout, and replaceable rubber wear pads. The M18 FUEL Coil Roofing Nailer joins the M18 System of over 250 solutions and is compatible with all M18 REDLITHIUM batteries. Battery Amp Hours: No Battery. Battery/Charger: Tool Only. Charger Included: Charger Not Included. Condition: New. Cordless/Corded: Cordless. Firing Mode: Contact. Included: No additional components or accessories are included. Loading type: Coil. Magazine Capacity: 120. Maximum Fastener Size: 1-3/4 in. Minimum Fastener Size: 3/4 in. Multi-Purpose: Single Purpose. Nailer Features: Lithium Ion Battery. Nails Per Minute: 360. Number of Total Batteries Included: 0. Power Type: Cordless. Returnable: 90-Day. Tool Weight (lb.): 7 lb. Tools Product Type: Air Tool. Voltage (v): 18v. Battery Charge Time (Hours): 0. Nail Angle: 15 degree. Nail Gauge: NA. Product Depth (in.): 11.6 in. Product Height (in.): 12 in. Product Width (in.): 5 in.

Milwaukee Deep Cut Band Saw 2929-20 - Condition: Excellent Damaged?: No In Packaging?: No Assembly Required?: No Star Rating: 0.0 Missing Parts?: No Functional?: Yes UPC: NOUPC{10382008} Title: Milwaukee Deep Cut Band Saw 2929-20 Great Condition Tested Tool only.

Milwaukee M18 3/8 Compact Impact w/ 5.0A Battery & Charger! New(other) Condition. Impact in box. Battery & Chargers out of box. Functional: Yes. UPC: NOUPC{10422501}

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Gen II 18-Gauge Brad Nailer (Tool-Only) The MILWAUKEE M18 FUEL 18ga Brad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the finish nailer enables users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE Brushless Motor and REDLINK PLUS Intelligence delivers users with unmatched fire rate with zero ramp-up time keeping them efficient throughout their day. Additionally, the cordless brad nailer operates using Milwaukee's REDLITHIUM Batteries (not included) and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors' nailers. The 18 gauge nailer is compact in size, and very lightweight, providing users with unmatched access into tight spaces and limiting their fatigue throughout their day. The M18 FUEL 18ga Brad nailer delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of cordless. Reversible belt hook included. Three interchangeable tips included. Dry fire lockout. No gas cartridge required. On / Off power button. Tool free drive depth adjustment. Tool free jam clearing latch. Sequential and contact actuation firing modes.

Milwaukee M12 FUEL 2-Tool Combo Kit Cordless Hammer Drill and Impact Driver w/2 Batteries and Bag (2-Tool). Includes MILWAUKEE M12 FUEL 1/2" Drill Driver, M12 FUEL 1/4" Hex Impact Driver, M12 REDLITHIUM XC 4.0Ah Battery Pack, M12 REDLITHIUM CP 2.0Ah Battery Pack, with an M12 charger and a contractor bag. The M12 FUEL 1/2" Drill/Driver is the Most Powerful Subcompact Drill Driver, the most compact in size, and has the fastest speed under load. The POWERSTATE brushless motor delivers the most power on the widest variety of applications. The portable drill is the shortest solution in its class offering maneuverability and access to tight spaces. MILWAUKEE REDLINK PLUS Intelligence delivers top of the line thermal performance to give users the Fastest Speed Under Load. MILWAUKEE M12 FUEL 1/4" Hex Impact Driver is the Fastest Subcompact Impact Driver, the Most Compact, and provides Maximum Workspace Visibility. At 5" long and 7.6" tall (with M12 CP 2.0 Ah battery), this solution is the most overall compact impact driver in its class. Tri-LEDs surround the bit accessory with brighter lights and fewer shadows providing maximum visibility. Using M12 REDLITHIUM 2.0Ah compact and 4.0Ah extended capacity battery packs will deliver more work per charge. The M12 FUEL Impact Driver and M12 FUEL 1/2" Drill Driver are part of MILWAUKEE M12 System which is fully compatible with over 125 solutions. Most Powerful Subcompact Hammer Drill. Fastest Subcompact Impact Driver. Most Compact Drill and Impact Driver for best access in tight spaces. Fastest Drilling and Driving applications under load. Maximum Workspace Visibility through Tri-LED Work lights on the Impact Driver. 1/2" All-Metal chuck for maximum durability, grip and bit retention. Mechanical Clutch on Drill for consistency in driving a wide range of fasteners. Impact Driver includes 4-Mode Drive Control with dedicated self tapping screw mode. More work per charge with the M12 REDLITHIUM XC4.0 battery pack. All-Metal Gearcase for ultimate durability. Part of the M12 System, featuring over 125+ Tools. Includes: (1) 3404-20 M12 FUEL Hammer Drill Driver Bare Tool, (1) 3453-20 M12 Fuel Impact Driver Bare Tool, (1) M12 Redlithium XC 4.0AH Battery (48-11-2440), (1) M12 Redlithium CP 2.0AH Battery (48-11-2420), (1) M12 Battery Charger (48-59-2401). Motor Type: Brushless. Number of Tools (Bonus Tool Not Included): 2. Number of Total Batteries Included: 2. Cordless/ Corded: Cordless. Features: LED Light. Features: Variable Speed. Features: Built-In Light.

Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless Finish Nailer. Notes: Great condition Tested Tool only Condition: Open Box - Tested Damaged?: No In Packaging?: Yes Assembly Required?: No Star Rating: 0.0 Missing Parts?: No Functional?: Yes UPC: 045242795970 Brand: Milwaukee Model: 3020-20 Title: $329 Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless Finish Nailer The Milwaukee M18 fuel 16 gauge straight finish nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging the nitrogen air spring mechanism, the 16 gauge straight finish nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with the powerstate brushless motor and redlink plus intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, keeping you productive and efficient throughout your job. This cordless finish nailer features a compact and ergonomic design providing access to tight spaces where nailing is required while limiting fatigue when using the tool. The milwaukee M18 fuel 16 gauge straight finish nailer delivers the pneumatic performance that professional carpenters and remodelers demand, with the freedom and convenience of cordless.

Milwaukee M18 3/8 Compact Impact w/ 5.0A Battery & Charger! #2. New(other) condition. Impact in box. Battery & Chargers out of box. Functional.

Milwaukee M12 FUEL 12-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit w/2 Batteries and Bag (2-Tool). MILWAUKEE M12 FUEL 2-Tool Combo Kit has the Most Powerful Subcompact Drill, the Fastest Driving Subcompact Impact Driver while being the overall Most Compact Drill and Impact Driver. Includes MILWAUKEE M12 FUEL 1/2" Drill Driver, M12 FUEL 1/4" Hex Impact Driver, M12 REDLITHIUM XC 4.0Ah Battery Pack, M12 REDLITHIUM CP 2.0Ah Battery Pack, with an M12 charger and a contractor bag. The M12 FUEL 1/2" Drill/Driver is the Most Powerful Subcompact Drill Driver, the most compact in size, and has the fastest speed under load. The POWERSTATE brushless motor delivers the most power on the widest variety of applications. The portable drill is the shortest solution in its class offering maneuverability and access to tight spaces. MILWAUKEE REDLINK PLUS Intelligence delivers top of the line thermal performance to give users the Fastest Speed Under Load. MILWAUKEE M12 FUEL 1/4" Hex Impact Driver is the Fastest Subcompact Impact Driver, the Most Compact, and provides Maximum Workspace Visibility. At 5" long and 7.6" tall (with M12 CP 2.0 Ah battery), this solution is the most overall compact impact driver in its class. Tri-LEDs surround the bit accessory with brighter lights and fewer shadows providing maximum visibility. Using M12 REDLITHIUM 2.0Ah compact and 4.0Ah extended capacity battery packs will deliver more work per charge. The M12 FUEL Impact Driver and M12 FUEL 1/2" Drill Driver are part of MILWAUKEE M12 System which is fully compatible with over 125 solutions. Most Powerful Subcompact Hammer Drill. Fastest Subcompact Impact Driver. Most Compact Drill and Impact Driver for best access in tight spaces. Fastest Drilling and Driving applications under load. Maximum Workspace Visibility through Tri-LED Work lights on the Impact Driver. 1/2" All-Metal chuck for maximum durability, grip and bit retention. Mechanical Clutch on Drill for consistency in driving a wide range of fasteners. Impact Driver includes 4-Mode Drive Control with dedicated self tapping screw mode. More work per charge with the M12 REDLITHIUM XC4.0 battery pack. All-Metal Gearcase for ultimate durability. Part of the M12 System, featuring over 125+ Tools. Includes: (1) 3404-20 M12 FUEL Hammer Drill Driver Bare Tool, (1) 3453-20 M12 Fuel Impact Driver Bare Tool, (1) M12 Redlithium XC 4.0AH Battery (48-11-2440), (1) M12 Redlithium CP 2.0AH Battery (48-11-2420), (1) M12 Battery Charger (48-59-2401). Motor Type: Brushless. Number of Tools (Bonus Tool Not Included): 2. Number of Total Batteries Included: 2. Cordless/ Corded: Cordless. Features: LED Light. Features: Variable Speed. Features: Built-In Light.

MILWAUKEE M18 18-VOLT LITHIUM-ION REDLITHIUM FORGE STARTER KIT WITH 8.0AH BATTERY AND RAPID CHARGER. THE MILWAUKEE M18 REDLITHIUM FORGE XC8.0 STARTER KIT DELIVERS HIGH OUTPUT 12.0 POWER IN A SMALLER SIZE AND THE LONGEST LIFE VS REDLITHIUM BATTERIES. REDLITHIUM FORGE ARE MILWAUKEE'S MOST POWERFUL, FASTEST CHARGING, AND LONGEST LIFE BATTERIES. THE REDLTIHIUM FORGE XC8.0 DELIVERS 8 AMP HOURS OF RUNTIME, BUT WITH THE SAME POWER AS THE M18 REDLITHIUM HIGH OUTPUT HD12.0 IN A SMALLER SIZE AND LIGHTER WEIGHT DESIGN. THE LITHIUM-ION BATTERY HAS THE LONGEST LIFE, MOST RECHARGES, AND BEST PERFORMANCE OVER THE LIFE OF THE BATTERY. DESIGNED WITH RESISTANT HOUSING FOR INCREASED PROTECTION AGAINST EXPOSURE TO COMMON OILS, GREASES, & SOLVENTS. BUILT-IN REDLINK INTELLIGENCE PROTECTS THE BATTERY FROM OVERLOADS, PREVENTING DAMAGE TO CORDLESS POWER TOOLS. THE REDLITHIUM FORGE XC8.0 BATTERY IS FULLY COMPATIBLE WITH 275+ M18 SOLUTIONS. THE M18 & M12 RAPID CHARGER CHARGES BATTERY PACKS UP TO 40% FASTER, REDUCING DOWNTIME AND MAXIMIZING PRODUCTIVITY. THE BATTERY CHARGER ACCEPTS ALL M18 AND M12 BATTERIES, PROVIDING A CHARGING UPGRADE FOR BOTH SYSTEMS. THE BATTERY CHARGER COMMUNICATES DIRECTLY WITH YOUR BATTERY PACK TO MONITOR CELL VOLTAGE, TEMPERATURE AND CHARGE STATUS TO ENSURE A FULL CHARGE. DELIVERS HIGH OUTPUT 12.0 POWER IN A SMALLER SIZE. MOST POWERFUL, FASTEST CHARGING, LONGEST LASTING M18 BATTERIES. LONGEST LIFE FOR THE MOST RECHARGES. DELIVERS HIGH OUTPUT 12.0 POWER IN A SMALLER SIZE AND LIGHTER WEIGHT. LONGEST LIFE FOR THE MOST RECHARGES AND BEST PERFORMANCE OVER THE LIFE OF THE PACK. REDLITHIUM FORGE PROVIDES THE MOST POWERFUL, FASTEST CHARGING, AND LONGEST LIFE BATTERIES WITHIN REDLITHIUM. FULLY COMPATIBLE WITH THE M18 SYSTEM, FEATURING 275+ TOOLS. CHARGES IN 83MINUTES TO 100% WITH KITTED RAPID CHARGER. BEST PROTECTION FORM JOBSITE, WEATHER AND ENVIRONMENTAL CONDITIONS. PWR LEVEL 4 ON THE REDLITHIUM POWER SCALE. RESISTANT HOUSING DESIGNED TO PROVIDE INCREASED PROTECTION AGAINST EXPOSURE TO COMMON OILS, GREASES, AND SOLVENTS. M12 & M18 RAPID CHARGER CHARGES PACKS UP TO 40% FASTER. INCLUDES: (1) M18 REDLITHIUM FORGE XC8.0 BATTERY PACK, (1) M18/M12 RAPID CHARGER. AC\DC: AC. BATTERY AMP HOURS: 8 AH. BATTERY POWER TYPE: LITHIUM ION. BATTERY VOLTAGE (V): 18V. CHARGE TIME (MIN.): 45. CHARGER INCLUDED: CHARGER INCLUDED. COLOR FAMILY: RED. NUMBER OF CHARGING PORTS: 2 PORT. NUMBER OF TOTAL BATTERIES INCLUDED: 1. POWER TOOL ACCESSORY TYPE: BATTERY AND CHARGER SET. POWER TOOL FEATURES: NO ADDITIONAL FEATURES. RECHARGEABLE: YES. USED WITH EQUIPMENT TYPE: BLOWER,CHAINSAW,DRILL,GRINDER,IMPACT WRENCH,JOBSITE,METALWORKING TOOL,SAW,STRING TRIMMER,UTILITY.

M18 Compact Router w/ 5.0Ah Battery. Brand new W/ 5.0Ah battery. New(other) condition. UPC: NOUPC{10381457}

Milwaukee M18 2940-20 Stick Transfer Pump. Our Milwaukee Brushless M18 Stick Transfer Pump delivers superior filtration for the fastest handheld pumping in trenches, vaults, utility pole hole, and general site dewatering. Powered by our M18 battery platform and brushless motor technology, this water transfer pump provides high performance and productivity, pumping up to 25 gallons per minute and up to 1000 gallons on (1) M18 REDLITHIUM FORGE HD12.0 battery. Equipped with HydroPass filter technology, its 360 filter maximizes flow in heavy debris, minimizing downtime caused by clogging. With a 48" submersible reach, this transfer pump provides the extension needed to reach water at the bottom of trenches, utility pole holes, vaults, and other difficult to reach areas, and a 17ft max head height pushes water farther. Equipped with an adaptable outlet, operate the pump with a 1- " NPT threaded discharge hose for max flowrate, or leverage the included threaded Y-Adapter for single or dual " standard garden hose use. Amperage (A): 0 A. Cord Length (ft.): 0 ft. Discharge Flow @ 0 ft. (gallons/hour): 25. Discharge Flow @ 0 ft. (gallons/min): 0. Discharge Flow @ 10 ft. (gallons/hour): 18.53. Discharge Flow @ 10 ft. (gallons/min): 0. Features: No Additional Features. Head Pressure (ft.): 17. Housing Material: Aluminum. Impeller Material: NBR. Included: No Additional Items Included. Inlet Connection: Threaded male. Maximum Discharge Flow (gallons/hour): 25. Maximum Horsepower (hp): 1/3. Maximum Pressure (PSI): 7.4 PSI. Maximum Working Temperature (F): 122. Minimum working temperature (F): 32. Outlet Connection: Threaded female. Pack Size: 1. Power Type: Electric. Power Type Required: DC. Product Weight (lb.): 11.40 lb. Pump Switch Type: Electronic. Returnable: 90-Day. Vertical Lift (ft.): 0. Voltage: 18v. Certifications and Listings: UL Listed. Product Depth (in.): 6.25 in. Product Height (in.): 65 in. Product Width (in.): 5 in. Power Type: Electric. Housing Material: Aluminum. Discharge Flow @ 0 ft. (gallons/hour): 25. Voltage: 18v. Maximum Horsepower (hp): 1/3

20V MAX XR Lithium-Ion Cordless 18-Gauge Narrow Crown Stapler Kit with 2.0Ah Battery, Charger and Contractor Bag. The DEWALT DCN681 18-Gauge Narrow Crown Stapler drives 18-Gauge 1/4 in. narrow crown staples from 1/2 in. to 1-1/2 in. which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20-Volt MAX Lithium-Ion battery the DCN681 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20-Volt. Nominal voltage is 18.. 100% battery powered eliminates the hassle of using gas, compressor, and hose. Brushless motor maximizes runtime and durability. Tool-free selectable trigger for sequential or contact actuation modes. Tool-free depth adjustment for precise countersinking of staples. Low nail lockout prevents dry firing and unwanted marks on the work material. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment depending on user preference. Bottom load magazine for easy loading and removal of jammed fasteners.

MILWAUKEE M18 18-VOLT LITHIUM-ION REDLITHIUM FORGE STARTER KIT WITH 8.0AH BATTERY AND RAPID CHARGER. THE MILWAUKEE M18 REDLITHIUM FORGE XC8.0 STARTER KIT DELIVERS HIGH OUTPUT 12.0 POWER IN A SMALLER SIZE AND THE LONGEST LIFE VS REDLITHIUM BATTERIES. REDLITHIUM FORGE ARE MILWAUKEE'S MOST POWERFUL, FASTEST CHARGING, AND LONGEST LIFE BATTERIES. THE REDLTIHIUM FORGE XC8.0 DELIVERS 8 AMP HOURS OF RUNTIME, BUT WITH THE SAME POWER AS THE M18 REDLITHIUM HIGH OUTPUT HD12.0 IN A SMALLER SIZE AND LIGHTER WEIGHT DESIGN. THE LITHIUM-ION BATTERY HAS THE LONGEST LIFE, MOST RECHARGES, AND BEST PERFORMANCE OVER THE LIFE OF THE BATTERY. DESIGNED WITH RESISTANT HOUSING FOR INCREASED PROTECTION AGAINST EXPOSURE TO COMMON OILS, GREASES, & SOLVENTS. BUILT-IN REDLINK INTELLIGENCE PROTECTS THE BATTERY FROM OVERLOADS, PREVENTING DAMAGE TO CORDLESS POWER TOOLS. THE REDLITHIUM FORGE XC8.0 BATTERY IS FULLY COMPATIBLE WITH 275+ M18 SOLUTIONS. THE M18 & M12 RAPID CHARGER CHARGES BATTERY PACKS UP TO 40% FASTER, REDUCING DOWNTIME AND MAXIMIZING PRODUCTIVITY. THE BATTERY CHARGER ACCEPTS ALL M18 AND M12 BATTERIES, PROVIDING A CHARGING UPGRADE FOR BOTH SYSTEMS. THE BATTERY CHARGER COMMUNICATES DIRECTLY WITH YOUR BATTERY PACK TO MONITOR CELL VOLTAGE, TEMPERATURE AND CHARGE STATUS TO ENSURE A FULL CHARGE.. DELIVERS HIGH OUTPUT 12.0 POWER IN A SMALLER SIZE. MOST POWERFUL, FASTEST CHARGING, LONGEST LASTING M18 BATTERIES. LONGEST LIFE FOR THE MOST RECHARGES. DELIVERS HIGH OUTPUT 12.0 POWER IN A SMALLER SIZE AND LIGHTER WEIGHT. LONGEST LIFE FOR THE MOST RECHARGES AND BEST PERFORMANCE OVER THE LIFE OF THE PACK. REDLITHIUM FORGE PROVIDES THE MOST POWERFUL, FASTEST CHARGING, AND LONGEST LIFE BATTERIES WITHIN REDLITHIUM. FULLY COMPATIBLE WITH THE M18 SYSTEM, FEATURING 275+ TOOLS. CHARGES IN 83MINUTES TO 100% WITH KITTED RAPID CHARGER. BEST PROTECTION FORM JOBSITE, WEATHER AND ENVIRONMENTAL CONDITIONS. PWR LEVEL 4 ON THE REDLITHIUM POWER SCALE. RESISTANT HOUSING DESIGNED TO PROVIDE INCREASED PROTECTION AGAINST EXPOSURE TO COMMON OILS, GREASES, AND SOLVENTS. M12 & M18 RAPID CHARGER CHARGES PACKS UP TO 40% FASTER. INCLUDES: (1) M18 REDLITHIUM FORGE XC8.0 BATTERY PACK, (1) M18/M12 RAPID CHARGER. AC\DC: AC. BATTERY AMP HOURS: 8 AH. BATTERY POWER TYPE: LITHIUM ION. BATTERY VOLTAGE (V): 18V. CHARGE TIME (MIN.): 45. CHARGER INCLUDED: CHARGER INCLUDED. COLOR FAMILY: RED. NUMBER OF CHARGING PORTS: 2 PORT. NUMBER OF TOTAL BATTERIES INCLUDED: 1. POWER TOOL ACCESSORY TYPE: BATTERY AND CHARGER SET. POWER TOOL FEATURES: NO ADDITIONAL FEATURES. RECHARGEABLE: YES. USED WITH EQUIPMENT TYPE: BLOWER,CHAINSAW,DRILL,GRINDER,IMPACT WRENCH,JOBSITE,METALWORKING TOOL,SAW,STRING TRIMMER,UTILITY.

Milwaukee M18 FUEL 3/8 in. Cordless Brushless Compact Impact Wrench Tool Only. The Milwaukee M18 fuel 3/8 in. Compact Impact wrench with friction ring is the most compact in its class, delivering you the most access in tight spaces, up to 250 ft.-lbs. of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 4.8 in. in length. The Milwaukee 3/8 in. compact impact wrench has Tri-LEDs that surround the anvil to deliver you brighter light with fewer shadows. 4-mode drive control offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. Mode 4 also features bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Redlink plus intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 Redlithium battery pack not included fits M18 tools, delivering more work per charge and more work over the life of the pack.

DeWalt DCBL772X1 60V MAX Handheld Leaf Blower Kit (Battery & Charger). 125 mph 600 CFM. 60 V Battery. As part of the 60V MAX Flexvolt battery system of high-powered products, the 60V MAX Flexvolt brushless handheld axial blower powers through your task with up to 600 CFM of air volume and 125 MPH. It features a variable speed trigger and speed lock to control the blower output. This kit also comes with a 20V/60V MAX Flexvolt battery that can both power your line-up of 60V MAX tools and equipment as well as your 20V MAX tools and can be charged with your 20V MAX chargers.

Milwaukee 48-59-1862S M18 18-Volt Lithium-Ion High Output Starter Kit with Two 6.0 Ah Battery and Charger. The Milwaukee M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery 2-Pack System Starter Kit. The M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery Pack provides 50% more power and runs 50% cooler vs M18 REDLITHIUM XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18 products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18 REDLITHIUM HIGH OUTPUT XC6.0 provides increased power in extreme cold weather conditions (below 0 F/minus 18 C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUM HIGH OUTPUT XC6.0 battery is fully compatible with 200 plus M18 solutions. Provides 60% more run-time than an M18 XC5.0 battery. Compatible with all M18 cordless power tools. Includes: 2 M18 HIGH OUTPUT XC 6.0Ah batteries (48-11-1865) and 1 M18/M12 charger (48-59-1812). Charges all M18 and M12 batteries.

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 18-Gauge 1/4 in. Narrow Crown Stapler (Tool-Only). The Milwaukee M18 FUEL 18-Gauge in. Narrow Crown Stapler delivers peak productivity, providing users with unmatched stapling performance without the hassle of a compressor and hose. A nitrogen air spring mechanism gives this cordless staple gun power to consistently sink staples to the proper depth in hard materials with the ability to adjust to drive staples in soft materials without blowing through. The combination of a POWERSTATE Brushless Motor and REDLINK PLUS Intelligence provides an unmatched fire rate with zero ramp-up time, keeping users efficient throughout the day. This battery powered narrow crown stapler is compact and lightweight, giving users better access into tight spaces and limiting fatigue throughout the day. The M18 FUEL 18-Gauge 1/4 in. Narrow Crown Stapler delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of a cordless tool. The tool includes 2 work contact tips and a reversible belt hook.. Delivers consistent, clean staple setting, with the power to drive into hard materials and adjustability for soft materials. Compact size and light weight. Zero ramp-up time. Fully compatible with the M18 system, featuring over 200 plus tools. Tool free drive depth adjustment. Sequential and contact actuation firing modes. Dry fire lockout. No gas cartridge required. 2 work contact tips included. Reversible belt hook included. On/off power button. Includes: one 2749-20 M18 FUEL 18-Gauge 1/4 in. narrow crown stapler tool-only.

20V MAX XR Lithium-Ion Cordless 18-Gauge Brad Nailer (Tool Only). DEWALT DCN680B 18-Gauge Brad Nailer drives 18-Gauge brad nails from 5/8 in. to 2-1/8 inches. This nailer is ideal for fastening decorative molding, casing, kitchen crown and shoe molding. With its brushless motor the DCN680B is ready to go to work without the hassle of using gas, compressor and hose. 100% battery powered eliminates the hassle of using gas, compressor and hose. Brushless motor maximizes runtime and durability. Micro nose improves line of sight and accuracy of nail placement (compared to DEWALT DC608). Tool-free depth adjustment for precise countersinking of nails. Tool-free jam release to quickly and easily clear nail jams. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Tool-free selectable trigger for sequential or contact actuation modes. Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment depending on user preference. Low nail lockout prevents dry firing and unwanted marks on the work material. Cord Style: Cordless. Power Type: Electric. Nail Gauge: 18 gauge. Motor Type: Brushless. Maximum Fastener Size: 2-1/8 in. Voltage (v): 20v. Minimum Fastener Size: 5/8 in. Nail Gun Angle: 0 degree.

DEWALT DCD1007WW1 20V MAX XR 1/2 Inch Cordless Hammer Drill Kit with 8AH Battery and Charger. Our most powerful 20V Max hammer drill - take on a wide range of demanding applications with our most powerful 20V Max hammer drill. Help maximize control - equipped with the anti-rotation system that senses the rotational motion of the tool and shuts it down if the motion is excessive. The red LED indicator illuminates when the anti-rotation system is engaged. Advanced maneuverability - access and maneuver in tight areas with the shortest length DEWALT premium 3-speed drill. 3-speed high-performance transmission - help optimize runtime and performance with an all metal transmission. Comes with Battery and Charger.

Milwaukee M18 FUEL 18V Lithium-Ion Brushless Cordless Super SAWZALL Orbital Reciprocating Saw (Tool-Only) The Milwaukee M18 FUEL SUPER SAWZALL generates the power of a 15 Amp Corded Reciprocating Saw, Faster Cuts than the legendary Milwaukee 15 Amp AC SUPER SAWZALL, and Up To 150 Cuts in 2x12 SPF per charge. Designed to perform in the toughest applications the M18 FUEL SUPER SAWZALL combines Milwaukee's legendary performance and durability with the portability of the M18 platform. The POWERSTATE Brushless Motor Provides 3,000 SPM and higher speeds under load for corded cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 Redlithium High output HD12.0 battery delivers unmatched run-time in all applications. The 1-1/4 in. stroke length removes more material with each stroke and selectable On/Off Orbital action provides aggressive cuts in wood and smooth cuts in metal. Variable speed trigger and 5 speed dial provide maximum speed control for any application. The QUIK-LOK blade clamp allows for tool less blade changes and a rafter hook provides a convenient way to store the saw between cuts.. Powerstate brushless motor: purposely built for the M18 fuel super sawzall to generate the power and performance of a 15 Amp corded reciprocating saw. Redlink plus intelligence: ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 system. Compatible with all M18 batteries and tools. 1-1/4 in. stroke length removes more material with each stroke. Variable speed trigger and 5 speed dial provide ultimate speed control. Integrated rafter hook for easy storage between cuts. LED light for increased accuracy and visibility. Adjustable shoe-extends the life of the blade. Quik-lok blade clamp for tool less blade changes. Selectable on/off orbital action provides aggressive cutting in wood and smooth cuts in metal. Includes: 2722-20 Super sawzall. Cordless. Battery Amp Hours: No Battery. Number of Total Batteries Included: 0. Included Accessories: Tool Only. Cuts Through: Metal. Cuts Through: Wood. Features: Variable Speed.

20V MAX XR Lithium-Ion Cordless 18-Gauge Brad Nailer (Tool Only). DEWALT DCN680B 18-Gauge Brad Nailer drives 18-Gauge brad nails from 5/8 in. to 2-1/8 inches. This nailer is ideal for fastening decorative molding, casing, kitchen crown and shoe molding. With its brushless motor the DCN680B is ready to go to work without the hassle of using gas, compressor and hose. 100% battery powered eliminates the hassle of using gas, compressor and hose. Brushless motor maximizes runtime and durability. Micro nose improves line of sight and accuracy of nail placement (compared to DEWALT DC608). Tool-free depth adjustment for precise countersinking of nails. Tool-free jam release to quickly and easily clear nail jams. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Tool-free selectable trigger for sequential or contact actuation modes. Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment depending on user preference. Low nail lockout prevents dry firing and unwanted marks on the work material. Cord Style: Cordless. Power Type: Electric. Nail Gauge: 18 gauge. Motor Type: Brushless. Maximum Fastener Size: 2-1/8 in. Voltage (v): 20v. Minimum Fastener Size: 5/8 in. Nail Gun Angle: 0 degree.

DEWALT DCCS677B 60V MAX 20 in. Battery Chainsaw Tool Only. Notes: Used Tested Good condition Condition: Very Good Damaged?: No In Packaging?: Yes Assembly Required?: N/A Star Rating: 0.0 Missing Parts?: Unknown Functional?: Yes UPC: 885911798174. Cut, chop, and sculpt with ease using the durable 60V MAX Brushless Cordless 20 in. Chainsaw. With a peak horsepower of 4 HP using a DCB615 battery (sold separately), this rugged Chainsaw packs the sawing power and dependability needed for routine sunup to sundown workdays. Tighten the chain as needed for steady bar retention while the brushless motor delivers high-efficiency performance with auto-oiling for continuous lubrication. Kick back protection is provided by the chain brake bult-in with the low kick back bar and chain.

Milwaukee M18 18-Volt Lithium-Ion XC Starter Kit with Two 5.0Ah Batteries and Charger. The MILWAUKEE M18 REDLITHIUM XC5.0 Starter Kit delivers up to 2.5X more runtime, 20% more power, and 2X more recharges than standard lithium-ion batteries. The lithium-ion battery pack features superior pack construction, electronics, and performance. The rechargeable battery also offers users 5.0 amp-hours of runtime. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0 F/-18 C. This protection routes water away from the electronics and out of the battery pack, extends the battery's run-time and life by minimizing heat, and prevents pack failures from vibration or drops. Built-in REDLINK Intelligence protects the battery from overloads, preventing users from damaging their cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. An integrated temperature management system and individual cell monitoring help to maximize the battery's life. In addition to the batteries, the starter kit includes the M18 & M12 Battery Charger. Work more efficiently with a fuel gauge that displays run-time. M18 drill battery and charger provides performance and durability. REDLINK technology provides performance and protection. Fuel gauge onboard: Displays remaining run-time. Best-in-Class Construction: Offers long-lasting performance and durability. REDLINK Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger. All-weather performance: Delivers fade-free power in extreme jobsite conditions. Charges all M18 & M12 Batteries: Full system compatibility. Single unit simplicity for quick charge of all M12 and M18 battery packs. Exceptional charge management; charger communicates with the battery pack to ensure a full charge and battery protection. Includes: (2) M18 REDLITHUM XC5.0 Battery, (1) M18 & M12 Multi-Voltage Charger. Battery Amp Hours: 5.0. Battery Power Type: Lithium Ion. Battery Voltage (V): 18V. Charge time (min.): 60. Charger Included: Charger Not Included. Color Family: Red. Individual Battery Weight: 1.54 lb. Number of Total Batteries Included: 2. Power Tool Accessory Type: Battery. Power Tool Features: No Additional Features. Rechargeable: Yes. Used with Equipment Type: Specialty Power Tool. Product Height (in.): 6.1 in. Product Length (in.): 3.43 in. Product Width (in.): 12.28 in.

8 Amp Corded 1 in. SDS D-Handle Rotary Hammer Lightweight and fast, the Milwaukee 1 in. SDS D-Handle Rotary Hammer is designed to handle the toughest applications with accuracy and ease. Get up to 40% faster drilling and 15% more life, even in the toughest applications. Designed for the toughest applications, the 1 SDS-Plus D-Handle Rotary Hammer lasts longer and drills faster than other tools in its class. With a powerful 8 Amp motor, it delivers 0 RPM to 1,620 RPM, 0 BPM to 5,860 BPM and 2.1 ft./lbs. of torque. You'll get superior drilling speed without sacrificing the power needed to drill larger holes. At just 6.1 lbs. this rotary hammer is easy to use and helps avoid user fatigue. A mechanical clutch protects the motor when the bit binds and operation offers maximum versatility. The kit includes a side handle, depth rod and carrying case. Powerful 8 Amp motor: delivers 0 RPM to 1,620 RPM, 0 RPM to 5,860 BPM with up to 40% faster drilling speeds than the competition. 2.1 ft./lbs. of torque, blow energy. 3-mode operation for versatility, rotary hammer, hammer only and rotation only. Variable position chisel stop allows material to be adjusted regardless of orientation. Mechanical clutch protects the motor when the bit binds. Lightweight 6.1 lbs. design is easy to handle and helps reduce user fatigue. Includes: 1 in. SDS D-handle rotary hammer, depth rod, side handle and carrying case. Cordless/Corded: Corded. Chuck Type: SDS-Plus. Cordless/ Corded: Corded. Chuck Size: 1 In.. Maximum Speed (RPM): 1500 RPM. Condition: New. Included: Tool Case. Features: Variable Speed.

Milwaukee M12 FUEL 1/4 in. Cordless Brushless High Speed Ratchet Tool Only. Brushless High Speed Ratchet Tool Only. Brand new! New. Yes. No. No. Yes. Yes. 045242593088. Milwaukee. 2566-20. Milwaukee M12 FUEL 1/4 in. Cordless Brushless High Speed Ratchet Tool Only. The Milwaukee M12 Fuel is 1/4 in. High-Speed Ratchet is part of the latest addition to our best-in-class lineup of ratchets. This Milwaukee cordless ratchet features the fastest speed while installing and removing fasteners. The most compact head size in its class gives you more access in tight spaces. A steel yoke housing and Powerstate Brushless Motor deliver the superior durability that you expect from Milwaukee. Redlithium batteries deliver more work per charge and more work over the life of the battery. The M12 Fuel High-Speed Ratchets are an ideal addition to any technician tool chest, allowing you to be more productive than any other battery-powered ratchet.

Milwaukee 2904-20 M18 FUEL 18V Lithium-Ion Brushless Cordless 1/2 in. Hammer Drill/Driver (Tool-Only). The MILWAUKEE M18 FUEL " Hammer Drill Driver is the Industry's Most Powerful Hammer Drill, delivering the capability to drill the largest holes at high speed into the densest materials. The cordless drill is the Most Compact solution in its class and features AutoStop Control Mode for Enhanced Safety. The POWERSTATE Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 6.9" in length, this is the most compact cordless drill in its class for the best access and maneuverability in tight spaces. The AutoStop Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up with the best reaction time in the industry. The REDLINK PLUS intelligence ensures maximum performance and protects from overloads, heating, and over-discharge. The MILWAUKEE M18 REDLITHIUM battery packs deliver more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best-in-class. This provides increased grip strength, durability, and corrosion resistance. POWERSTATE Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver. Only 6.9" in length for access into tight spaces and reduced fatigue. Fastest Drilling and Driving applications under load. Auto-Stop Feature to prevent from over-roation in a bindup for enhanced safety, equipped with a dedicated autostop light on foot of tool to indicate a AutoStop event. 1/2" all-metal chuck with carbide teeth for maximum durability, grip and bit retention. Mechanical Clutch for consistency in driving a wide range of fasteners. Unmatched Performance with the most runtime in class with the XC5.0Ah batteries. Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete. All-metal belt clip for portability. 1400 in-lbs of torque. LED light for better visibility in low-light situations. Compatible with all M18 batteries & chargers. Cordless/ Corded: Cordless. Motor Type: Brushless. Chuck Type: Keyless. Chuck Size: 1/2 In.. Voltage (volts): 18 V. Number of Total Batteries Included: 0. Battery Amp Hours: No Battery.

Milwaukee M18 18-Volt Lithium-Ion XC Starter Kit with Two 5.0Ah Batteries and Charger. The MILWAUKEE M18 REDLITHIUM XC5.0 Starter Kit delivers up to 2.5X more runtime, 20% more power, and 2X more recharges than standard lithium-ion batteries. The lithium-ion battery pack features superior pack construction, electronics, and performance. The rechargeable battery also offers users 5.0 amp-hours of runtime. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below 0 F/-18 C. This protection routes water away from the electronics and out of the battery pack, extends the battery's run-time and life by minimizing heat, and prevents pack failures from vibration or drops. Built-in REDLINK Intelligence protects the battery from overloads, preventing users from damaging their cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. An integrated temperature management system and individual cell monitoring help to maximize the battery's life. In addition to the batteries, the starter kit includes the M18 & M12 Battery Charger. Work more efficiently with a fuel gauge that displays run-time. M18 drill battery and charger provides performance and durability. REDLINK technology provides performance and protection. Fuel gauge onboard: Displays remaining run-time. Best-in-Class Construction: Offers long-lasting performance and durability. REDLINK Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger. All-weather performance: Delivers fade-free power in extreme jobsite conditions. Charges all M18 & M12 Batteries: Full system compatibility. Single unit simplicity for quick charge of all M12 and M18 battery packs. Exceptional charge management; charger communicates with the battery pack to ensure a full charge and battery protection. Includes: (2) M18 REDLITHUM XC5.0 Battery, (1) M18 & M12 Multi-Voltage Charger. Battery Amp Hours: 5.0. Battery Power Type: Lithium Ion. Battery Voltage (V): 18V. Charge time (min.): 60. Charger Included: Charger Not Included. Color Family: Red. Individual Battery Weight: 1.54 lb. Number of Total Batteries Included: 2. Power Tool Accessory Type: Battery. Power Tool Features: No Additional Features. Rechargeable: Yes. Used with Equipment Type: Specialty Power Tool. Product Height (in.): 6.1 in. Product Length (in.): 3.43 in. Product Width (in.): 12.28 in.

Milwaukee M18 FUEL Cordless 4-1/2 to 5 in. Grinder Tool Only. The 13 Amp 5 in. Small-angle grinder (Trigger grip, no-lock) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, is the perfect match for industrial users. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed products, without a wrench. In addition, the tool-free, burst-resistant, adjustable guard allows users to make quick guard installations and adjustments.

20V MAX XR Lithium-Ion Cordless 18-Gauge Brad Nailer (Tool Only). DEWALT DCN680B 18-Gauge Brad Nailer drives 18-Gauge brad nails from 5/8 in. to 2-1/8 inches. This nailer is ideal for fastening decorative molding, casing, kitchen crown and shoe molding. With its brushless motor the DCN680B is ready to go to work without the hassle of using gas, compressor and hose. 100% battery powered eliminates the hassle of using gas, compressor and hose. Brushless motor maximizes runtime and durability. Micro nose improves line of sight and accuracy of nail placement (compared to DEWALT DC608). Tool-free depth adjustment for precise countersinking of nails. Tool-free jam release to quickly and easily clear nail jams. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Tool-free selectable trigger for sequential or contact actuation modes. Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment depending on user preference. Low nail lockout prevents dry firing and unwanted marks on the work material. Cord Style: Cordless. Power Type: Electric. Nail Gauge: 18 gauge. Motor Type: Brushless. Maximum Fastener Size: 2-1/8 in. Voltage (v): 20v. Minimum Fastener Size: 5/8 in. Nail Gun Angle: 0 degree.

Milwaukee M12 FUEL 12V Lithium-Ion Brushless Cordless HACKZALL Reciprocating Saw Kit (2520-20) with One 4.0Ah Battery, Charger & Tool Bag. The Milwaukee M12 FUEL HACKZALL Reciprocating Saw Kit (2520-20) delivers impressive run time, fast cutting and extensive tool life. A compact, 1-handed design provides superior control and the ability to make cuts in tight spaces, with lightweight construction that is optimal for overhead cutting applications. The POWERSTATE Brushless Motor offers constant power output, yet runs cool with no wearable components. REDLINK PLUS Intelligence ensures optimized performance and protects your investment from overload, overheating and over-discharge, while the M12 REDLITHIUM XC4.0 battery pack offers exceptional work per charge and work over the life of the pack for reliable, long-term performance. Includes 2520-20 M12 FUEL Hackzall reciprocating saw, multi-material blade, 48-59-2401 M12 lithium-ion battery charger, 48-11-2440 M12 redlithium XC 4.0 Ah battery and contractor bag. Great for small to medium cuts in wood, metal, PVC and more. 3000 SPM for powerful performance. 1-handed design provides superior control and versatility. Compact size allows for cutting in tight spaces, while lightweight design makes overhead work easier. Powerstate brushless motor supplies constant power to ensure faster cuts and reduced heat for extended life. Redlink plus intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. REDLITHIUM XC 4.0 battery pack provides superior pack construction, work per charge and work over pack life. Dual-gear counter-balance mechanism significantly reduces vibration, providing faster starts in metal and reducing user fatigue. Compatible with all M12 batteries. Cordless. Number of Total Batteries Included: 1. Battery Amp Hours: 4 Ah. Cuts Through: Metal. Features: Variable Speed. Features: Keyless Blade Change. Included Accessories: Bag.

DEWALT DCF809D1 20V MAX ATOMIC 1/4 in. Cordless Brushless Compact Impact Driver Kit (Battery & Charger) The Atomic compact brushless impact driver features a high performance brushless motor that delivers 1700 in-lb. of torque. The handle is ergonomically designed for increased comfort, balance and easier tool control.

DEWALT DCF809D1 20V MAX ATOMIC 1/4 in. Cordless Brushless Compact Impact Driver Kit (Battery & Charger) The Atomic compact brushless impact driver features a high performance brushless motor that delivers 1700 in-lb. of torque. The handle is ergonomically designed for increased comfort, balance and easier tool control.

Milwaukee M12 FUEL Brushless Cordless 1/4 in. Straight Die Grinder Tool Only. The Milwaukee M12 fuel 1/4 in. straight die grinder is designed to replace pneumatic die grinders. The die grinder provides you with up to .3 HP performance to outperform pneumatic die grinders by 20%. The M12 inline die grinder features 3-mode speed control and a responsive variable-speed trigger giving you unmatched control with your most common accessories. The cordless die grinder provides you with greater access and mobility, eliminating the frustrations of hoses and compressors.

20-Volt MAX Cordless Brushless 6-1/2 in. Circular Saw (Tool-Only) DEWALT DCS565B The DEWALT DCS565 20-Volt MAX 6-1/2 in. Circular Saw is ready to take on a variety of cutting applications with a combination of performance and versatility. It features a powerful brushless motor that delivers 4,950 RPM for fast, accurate, and consistent cutting. Tool-free depth and bevel adjustments provides a max depth of cut of 2-1/8 in. at 90 along with a max bevel of 50 . This saw is equipped with a Magnesium shoe, built-in rafter hook, bright LED , and optional dust chute. Battery and charger sold separately.. . Electric Brake quickly stops the blade after the trigger is released for added safety. Convienent storage on the jobsite with the built-in rafter hook.. Quickly adjust the bevel capacity from 0 - 50 with the tool-free bevel lever.. Compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries. Increased visibility and cut accuracy with bright LED. Powerful & efficient brushless motor provides optimal cutting performance in a variety of materials. Minimize dust while cutting with the optional dust chute, compatible with DEWALT's AirLock system or standard 35 mm dust extractor. High maneuverability with its lightweight & compact design.

Milwaukee M18 FUEL 1.25 HP Cordless Compact Router Tool Only. New in box. The Milwaukee M18 Fuel Compact Router combines power, speed and accurate depth adjustments to deliver clean, accurate cuts in a variety of materials and applications. The compact router leverages the Powerstate Brushless Motor and RedLink Plus electronics. This delivers the power of corded 1.25 horsepower trim routers and best-in-class 31,000 RPM providing users with power and speed for clean, quality cuts in hard materials. With an M18 RedLithium XC5.0 battery, the cordless compact router cuts up to 250 ft. of 3/8 in. round overs in red-oak, providing you with all-day run time with fewer trips to the charger. The handheld router is equipped with a micro-adjust dial and macro-adjust button, providing users with fast and accurate depth adjustments for precise work. A variable-speed dial with speed from 10,000 to 31,000 RPM gives users control in all applications. The compact router also features a sturdy 4 in. sub-base plate providing users with stability and dual-LED lights illuminate work surface. The M18 Fuel Compact Router is compatible with a plunge base and an offset base - sold separately.

DeWalt DCS565B 20V MAX 6-1/2 in. Cordless Brushless Circular Saw Tool Only. Features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting. Tool-free depth and bevel adjustments provide a max depth of cut of 2-1/8 in. at 90 deg. along with a max bevel of 50 deg.. This saw is equipped with a built-in rafter hook, bright LED, and optional dust chute. Battery and charger sold separately.

20V MAX 22 in. Cordless Battery Powered Hedge Trimmer (Tool Only) DEWALT DCHT821B The DEWALT 20-Volt Max Hedge Trimmer has a high output motor and laser cut, hardened steel blades engineered for clean, fast cuts on branches up to 3/4 of an in. thick with 22 in. of blade length. The compact and lightweight 7.5 lbs. design maximizes maneuverability and minimizes stress on your arms. Bare tool, battery and charger sold separately. Battery Amp Hours: No Battery. Battery Run Time (min.): 0. Battery Type: Lithium Ion. Battery Voltage (V): 20V. Battery/Charger: Tool Only. Charger Included: Charger Not Included. Cut Strokes per Minute: 0. Features: Antivibration. Hub Required: No hub connection available. Included: No Additional Items Included. Number of Total Batteries Included: 0. Power Type: Battery. Product Weight (lb.): 7.5 lb. Refurbished: No. Returnable: 90-Day. Shaft Type: Straight Shaft. Single/double-sided blade: Double-sided. Start Type: Electric. Trimmer Type: Hand Held. Certifications and Listings: No Certifications or Listings. Assembled Depth (in.): 38.661 in. Assembled Height (in.): 7.874 in. Assembled Width (in.): 9.423 in. Blade Gap (in.): .75 in. Blade Length (in.): 22 in. Blade Width (in.): 3.125. Maximum Cut Diameter (in.): .75 in. Shaft Length (in.): 22 in. Blade Length (in.): 22 in. Battery Voltage (V): 20V. Features: Antivibration. Battery/Charger: Tool Only. Charger Included: Charger Not Included. Shaft Type: Straight Shaft. Battery Amp Hours: No Battery.

20V Cordless Brushless 4-1/2 in. Angle Grinder (Tool Only) DEWALT DCG408B Complete grinding applications with the 20V MAX Brushless Cordless 4.5 in. Paddle-Switch Angle Grinder that maintains constant speed under load. Equipped with overload protection and an efficient brushless motor, this cordless tool accommodates 4.5 in. wheels and includes both a Type B guard for grinding and a Clip-On Guard to convert the Type B guard for cutting operations. Designed for versatility and durability, this grinder features mesh screens that help prevent debris that can cause damage from entering internal components. Offering paddle-switch operation that allows the user to conveniently start and stop their grinder, the 20V MAX Brushless Cordless 4.5 in. Paddle-Switch Angle Grinder is ideal for tough days on the job (battery and charger are sold separately). Amperage (A): 0.0 A. Arbor Size: 5/8 in. -11. Batteries Included: No. Battery Amp Hours: No Battery. Battery Power Type: Lithium Ion. Battery Size: 20-volt. Charger Included: Charger Not Included. Color Family: Yellow. Condition: New. Cordless Tool Type: Angle Grinder. Cordless/Corded: Cordless. Electronic Speed Control: No. Grinder Switch Type: Trigger. Included: Tool Only. Maximum Speed (RPM): 9000 RPM. Motor Type: Brushless. Number of Total Batteries Included: 0. Power Tool Features: Adjustable Handle Position,Lock On Switch. Product Weight (lb.): 4.6 lb. Returnable: 90-Day. Tools Product Type: Power Tool. Variable Speed: Yes. Voltage (V): 20 V. Certifications and Listings: CSA Listed. Product Depth (in.): 13.2 in. Product Height (in.): 4.9 in. Product Width (in.): 6.3 in. Wheel Diameter (in.): 4.5 in. Wheel Diameter (in.): 4.5 in.

Milwaukee M18 FUEL Cordless 4-1/2 to 5 in. Grinder Tool Only. The 13 Amp 5 in. Small-angle grinder (Trigger grip, no-lock) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, is the perfect match for industrial users. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed products, without a wrench. In addition, the tool-free, burst-resistant, adjustable guard allows users to make quick guard installations and adjustments. Missing Guard. Great Condition. Tested. Functional. In Packaging.

20-Volt Cordless Belt Sander (Tool-Only) DEWALT DCW220B Designed with the professional in mind DEWALT's First 20V* MAX XR 3X21 in. Cordless Belt Sander (Tool Only) is ideal for carpentry, remodeling, and general contracting. The variable speed trigger with lock-on 25 speed selection dial allows for control for various applications. The quick release belt change allows sandpaper to be changed easily. With the over-mold auxiliary handle it gives you two- handed operation and grip for scribing applications. The dust collection features include a tool-free Dust Port Swivel adapter, that is compatible with DEWALT's Airlock System or a standard 35mm dust extractor (both sold separately) to minimize dust during sanding. Wireless Tool Control System allows for ease of use when paired with compatible DEWALT vacuum or dust extractor (both sold separately). With a Brushless Motor, this cordless belt sander can achieve long runtime and efficiency. Lastly, the 3 X 21 in. platen allows for large surface area sanding. Batteries Included: No. Battery Amp Hours: No Battery. Battery Power Type: Lithium Ion. Battery Size: Lithium Ion. Battery Voltage (V): 20V. Belt length: 21 in. Charger Included: Charger Not Included. Color Family: Yellow. Condition: New. Cordless Tool Type: Belt Sander. Cordless/Corded: Cordless. Dust Collection Method: 1.375 in. Dust Port. Included: No Additional Items Included. Maximum speed (ft./min.): 1050. Minimum speed (ft./min.): 650. Motor Type: Brushless. Number of Total Batteries Included: 0. Power Tool Features: Variable Speed. Product Weight (lb.): 8.2 lb. Returnable: 90-Day. Switch Type: Trigger. Tools Product Type: Power Tool. Variable Speed: Yes. Certifications and Listings: CSA Listed. Belt width: 3 in. Product Depth (in.): 13.375 in. Product Height (in.): 9 in. Product Width (in.): 6.625 in. Belt length: 21 in. Belt width: 3 in. Cordless/ Corded: Cordless.

DEWALT 20V SDS Brushless Plus Hammer DCH133 Very Good Condition Tested Tool only.

DEWALT 20V MAX* Finish Nailer, Angled, 15GA (DCN650B) This cordless finish nailer is 100% battery power eliminates need for a compressor, hose or costly gas cartridges Brushless motor of 15 gauge finish nailer maximizes runtime and durability Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC628) Tool-free selectable trigger for sequential or contact actuation modes Tool-free depth adjustment for precise countersinking of nails Tool-free jam release to quickly and easily clear nail jams Multi-functional LED lights help to provide both workspace illumination and tool diagnostics Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall Adjustable belt hook for left or right attachment depending on user preference Inline magazine provides easy use in multiple orientations and in tight spaces.

M18 Cutout tool w/ 5.0Ah Battery. Used and functioning! Condition: Open Box - Tested Functional?: Yes

DEWALT 20V XR 10AH Battery Kit. Condition: Excellent. Functional: Yes. Tested 1 Battery and Charger.