FoodBeverage Nutraceutical Processing and Packaging Auction

KHS KISTERS INNOPACK TSP A-M ST TRAY SHRINK PACKER - USED KHS KISTERS INNOPACK TSP A-M ST TRAY SHRINK PACKER WITH: FULLY AUTOMATIC PACKING MACHINE THAT PRODUCES FILM-WRAPPED TRAYS GOOD FOR PET, GLASS, OR CANS. PREVIOUSLY RAN CANS OF SOUP OUTPUT: APPROXIMATELY 7200 PACKS AN HOUR, DEPENDING ON TRAY DIMENSIONS, PRODUCT, AND FILM NUMBER OF LANES: UP TO 2 (TRAY PROCESSING) PREVIOUSLY RAN FORMATS: 6 WIDE X 4 LONG X 1 TALL - 10.75 OUNCE CANS 6 WIDE X 4 LONG X 2 TALL - 10.75 OUNCE CANS 2 LANES OF 4 WIDE X 3 LONG X 1 TALL - 10.75 OUNCE CANS CONTAINER SIZE: 48 TO 120 MILLIMETERS CONTAINER HEIGHT: 58 TO 375 MILLIMETERS PACK DIMENSIONS (MACHINE DIRECTION): 110 TO 410 MILLIMETERS PACK DIMENSIONS (CROSS MACHINE DIRECTION): 165 TO 790 MILLIMETERS BLANK DIMENSIONS (INCL. TRAY WALL), M. D.: MIN. 170 MM, MAX. 510 MM BLANK DIMENSIONS (INCL. TRAY WALL), C. M. D.: MIN. 225 MM, MAX. 850 MM BLANK CAPACITY: UP TO 1,200 (B-FLUTE) FILM WIDTH: MAX. 950 MM (FILM SPREADING INCLUDED) FILM LENGTH: MIN. 350 MM, MAX. 1,300 MM FILM THICKNESS: MIN. 35 M, MAX. 80 M FILM REEL DIAMETER: MAX. 550 MM FILM REEL WEIGHT: MAX. 130 KG PRODUCT INFEED/LANING CONVEYOR DIMENSIONS: 40 INCHES WIDE X 19 FEET LONG BLANK TRAY INFEED MAGAZINE: 26 INCHES WIDE X 12 FEET LONG INFEED HEIGHT: 51.5 INCHES PRINT REGISTRATION ALLEN-BRADLEY LOGIX5561 CONTROLS SERVO DRIVEN ALLEN-BRADLEY PANELVIEW PLUS 1000 HMI OVERALL FOOTPRINT: 90 INCHES WIDE X 100 FEET LONG S/N: K 89403069-000100

SOFTGEL ENCAPSULATION MACHINE: RGY4-15 SERIAL: 2021051501 LCD TOUCHSCREEN: SEILMENS DIE ROLLERS: 4" @ 8.5 OVAL PRODUCTION QTY: 36,750 SOFTGELS/HR @ 3.5 RPM DIE INJECTORS:8 DIE ROLL SPEED: 0-5 RPM DOSAGE PRECISION:<+/- 2% OVERALL DIMENSIONS: LENGTH: 1700 INCHES WIDTH: 810 INCHES HEIGHT: 1750 INCHES ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE TUMBLE DRYER: TUMBLES CAGES: 4 SPEED: 5-30 RPM WEIGHT: 400 KG GELATIN MELTING TANK: SIZE: 250L POWER: 9KW WEIGHT:350KG GELATIN TRANSFER TANK: SIZE: 200L WEIGHT: 160KG ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE WATER CHILLER AIR BLOWER

FELDMEIER 650 GALLON (80 CUBIC FEET) JACKETED STAINLESS STEEL HORIZONTAL PADDLE MIXER - USED FELDMEIER JACKETED STAINLESS STEEL HORIZONTAL PADDLE MIXER WITH: MAXIMUM ALLOWABLE WORKING PRESSURE 150 PSI AT 350 F MINIMUM ALLOWED WOKING TEMPERATURE -20 F AT 150 PSI TANK DIMENSIONS: LENGTH: 47 INCHES WIDTH: 77 INCHES DEPTH: 47 INCHES (2) HINGED LIDS THAT CAN BE OPENED AS ONE PADDLE DIMENSIONS: TOP: LENGTH: 22 INCHES WIDTH: 18 INCHES WIDE BOTTOM: LENGTH: 11 INCHES WIDTH: 9 INCHES SUPER E BALDOR MOTOR: 5 HORSEPOWER ELECTRICAL: 230/460 VOLTS, 3 PHASE, 60 HERTZ, 13/6.5 AMPS CAPACITY: 650 GALLONS/87 CUBIC FEET LAST APPLICATION: CHILI S/N: 14E0490

[HMC IM7-14] POUCHMASTER HORIZONTAL FORM FILL AND SEAL - USED HMC HORIZONTAL FORM FILL AND SEAL WITH: MAX OUTPUT: UP TO 100 POUCHES PER MINUTE DEPENDING ON PRODUCT AND APPLICATION MINIMUM POUCH SIZE DIMENSIONS: WIDTH: 2 INCHES HEIGHT: 2 INCHES MAXIMUM POUCH SIZE DIMENSIONS: WIDTH: 5.75 INCHES HEIGHT: 9 INCHES APPROXIMATE OVERALL DIMENSIONS LENGTH: 220 INCHES WIDTH: 48 INCHES HEIGHT: 86 INCHES ELECTRICALS: SUPPLY VOLTAGE: 208 VOLTS, 3 PHASE CONTROL VOLTAGE: 120 VOLTS, 1 PHASE

KHS ROLAND 32 HS HIGH SPEED ROTARY GLUE LABELER - USED KHS ROLAND 32 HS LABELER WITH: HIGH SPEED WRAP-AROUND GLUE LABELER SINGLE LABELING AGGREGATE CUT AND STACK LABELS CLOCKWISE MAIN TURRET ROTATION 32 BOTTLE STATIONS ON MAIN TURRET OUTPUT: APPROXIMATELY 800 BOTTLES PER MINUTE, DEPENDING ON BOTTLE AND LABEL PREVIOUSLY USED FOR .5 LITER PET BOTTLES OF WATER; HAS 1 LITER PET CHANGEPARTS WORM SCREW AND STAR WHEEL INFEED NORDSON HOT MELT GLUE UNIT ALLEN-BRADLEY PANELVIEW PLUSS 1000 HMI ALLEN-BRADLEY LOGIX 5561 PLC STAINLESS STEEL CONSTRUCTION WITH FOOD GRADE CONTACT PARTS MODEL: ROLAND 32 HS

HMC IM7-14 POUCHMASTER HORIZONTAL FORM FILL AND SEAL - USED HMC PREMADE BAG HFFS WITH: MAX OUTPUT: UP TO 100 POUCHES PER MINUTE DEPENDING ON THE APPLICATION MINIMUM POUCH SIZE RANGE: WIDTH: 2 INCHES HEIGHT: 2 INCHES MAXIMUM POUCH SIZE: WIDTH: 5.75 INCHES HEIGHT: 9 INCHES APPROXIMATE OVERALL DIMENSIONS LENGTH: 220 INCHES WIDTH: 48 INCHES HEIGHT: 86 INCHES ELECTRICALS: 208 VOLTS, 3 PHASE, 60 HERTZ MODEL: IMF 7 - 14

[2000] KHS ROLAND 32 HS HIGH SPEED ROTARY GLUE LABELER - USED KHS ROLAND 32 HS LABELER WITH: HIGH SPEED WRAP-AROUND GLUE LABELER SINGLE LABELING AGGREGATE CUT AND STACK LABELS CLOCKWISE MAIN TURRET ROTATION 32 BOTTLE STATIONS ON MAIN TURRET OUTPUT: APPROXIMATELY 800 BOTTLES PER MINUTE, DEPENDING ON BOTTLE AND LABEL PREVIOUSLY USED FOR .5 LITER PET BOTTLES OF WATER WORM SCREW AND STAR WHEEL INFEED NORDSON HOT MELT GLUE UNIT ALLEN-BRADLEY PANELVIEW PLUSS 1000 HMI ALLEN-BRADLEY LOGIX 5561 PLC STAINLESS STEEL CONSTRUCTION WITH FOOD GRADE CONTACT PARTS MODEL: ROLAND 32 HS

APM MFA-26-P SHRINK BUNDLER AND HEAT TUNNEL - USED APM SHRINK BUNDLER WITH: FILM WIDTH: 22 INCHES DUAL LANE INFEED: 4 INCHES WIDE (EACH) SECO GAUGES SHRINK TUNNEL WIDTH: 17 INCHES HEIGHT: 16 INCHES STEEL MESH CONVEYOR DISCHARGE: 36 INCHES PUSH BUTTON CONTROLS ELECTRICAL: 480 VOLTS, 3 PH, 60 HZ STAINLESS STEEL CONTACT SURFACES S/N: 653

142.5" L BY 33" W BLUE BELT INCLINE CONVEYOR WITH: INFEED: 15 INCHES BELT WIDTH: 33 INCHES LANING RAILS: 26 INCHES DOWN TO 23 INCHES WIDE DISCHARGE: 6 FOOT INFEED SLANT OF CONVEYOR: 124 INCHES DISCHARGE STRAIGHT OF CONVEYOR: 18.5 INCHES (APPROXIMATELY) GEARED MOTOR

FALLAS R400 ROBOTIC CASE PACKER WITH UPPENDER - USED FALLAS CASE ERECTOR CASE PACKER AND UPENDER WITH: FALLAS R400 ROBOTIC CASE PACKER: SERIAL NUMBER: R400031202-05 CASE SIZE RANGE: MINIMUM: 10 INCHES X 6 INCHES X 4 INCHES (LWH) MAXIMUM: 24 INCHES X 16 INCHES X 12 INCHES (LWH) AIR: .5 INCHES AIR INLET 4 CUBIC FEET PER MINUTE AT 80 PSI HMI: SCHNEIDER 10 INCH TOUCH COLOR PRODUCT AND CASE FLOW CAN BE REVERSED 480V 3PH 35 AMP 14CASPACK2 10026902 FALLAS 14 UPENDER TO POSITION CARTONS IN UPRIGHT POSITION TO LOAD INTO THE CASE PACKER CONVEYORS: (INCHES) PLASTIC TABLE TOP: 171 LONG X 24 WIDE X 24 TALL PLASTIC TABLE TOP: 127 LONG X 16 WIDE X 38 TALL MODEL:R-400-BP

31-A STAINLESS STEEL 5 GALLON HOPPER AUGER FILLER WITH SCALE - USED AUGER FILLER WITH SCALE WITH: HOPPER CAPACITY: 5 GALLONS HOPPER DIAMETER: 22 INCHES DISCHARGE DIAMETER: 2 INCHES DISCHARGE HEIGHT: 40 INCHES DIGITAL SCALE PUSH BUTTON CONTROLS 2 HORSEPOWER MOTOR ELECTRICAL REQUIREMENTS: 460 VOLTS, 60 HERTZ, 3 PHASE

2004 FREY KONTI C120 STAINLESS STEEL ROTARY VANE VACUUM STUFFER WITH TWIST LINKER - USED FREY KONTI VACUUM STUFFER WITH: HOPPER CAPACITY: 120 LITERS ROTARY VANE AGITATED HOPPER PORTION SIZE: MINIMUM: 5 GRAMS MAXIMUM: 1000 GRAMS TWIST LINKER: VARYING SIZES COLLAGEN PULLER PUSH BUTTON CONTROLS ELECTRICAL: VOLTS: 220 FREQUENCY: 60 HZ PHASE 1 STAINLESS STEEL COMPLETE WITH CHANGE PARTS S/N: 21144

[2002] COBALT 100 SERIES SEMI-AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY CASE DIMENSIONS: LENGTH: 7-24 INCHES WIDTH: 7-19 INCHES MINIMUM HEIGHT: 6 INCHES HAND ADJUSTMENTS SLIDING TAPE HEAD: 2 INCHES WIDE BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING CASTERS ELECTRICAL: VOLTS: 115 FREQUENCY: 60HZ PHASE 1 AMPS: 15 AIR REQUIREMENTS: 80 PSI STAINLESS STEEL CONSTRUCTION

[BARTELT] [IM-714] HORIZONTAL FORM FILL AND SEAL WITH: PRODUCTION OUTPUT RATE: UP TO 70 POUCHES PER MINUTE CENTERS: 7 INCHES STATIONS: 14 FILM ROLL LENGTH: 12 INCHES FILM ROLL DIAMETER: 1 INCH SEAL JAW LENGTH: 9 INCHES MILD STEEL FRAME ELECTRICAL REQUIREMENTS: 230/480 VOLTS, 60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 221 INCHES WIDTH: 54 INCHES HEIGHT: 91 INCHES

USED BOSCH DOBOY LINIUM 301 PRINT REGISTER FLOW WRAPPER WITH: APPLICATION: DESIGNED TO FLOW WRAP PRODUCTS WITH PRINT REGISTERED FILM OUTPUT: UP TO 150 PACKAGES PER MINUTE PRODUCT SIZE RANGE: MINIMUM (INCHES): 3.5 LONG X 0.4 WIDE MAXIMUM (INCHES): 7.25 LONG X 6.9 WIDE MAXIMUM HEIGHT (WITH PROPER CHANGE PARTS): 2.5 INCHES BOSCH INFEED SERIAL: 05-25838 INFEED LENGTH: 97 INCHES INFEED BELT WIDTH: 5 INCHES LUGGED INFEED LUG CENTER SET: 10 INCHES PRINT REGISTRATION: EYE PACKAGING MATERIALS: PRINTED OR UNPRINTED HEAT SEALABLE POLYPROPYLENES LAMINATES FILM SPECS: MAXIMUM WIDTH: 23.6 INCHES MAXIMUM REEL DIAMETER: 15.7 INCHES ON 3 INCH CORE 1 UP CRIMP VERTICAL SEAL: 9 INCHES WIDE

3400 GALLON STAINLESS STEEL TANK: STAINLESS STEEL CAPACITY: 3400 GALLONS DIMENSIONS: DIAMETER: 7 FEET HEIGHT: 12 FEET MANWAY: 20 INCH INSIDE DIAMETER 4 INCH PUMP/SUCTION INLETS 10 INCH RETURN OUTLETS

KAPS-ALL FS-A-36 36" ROTARY ACCUMULATION TABLE - USED KAPS-ALL ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES INFEED HEIGHT: 42 INCHES STAINLESS STEEL TABLE TOP VARIABLE FREQUENCY DRIVE PRODUCT GUIDE RAILS MOUNTED ON CASTERS ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE S/N: 3512

INVENSYS APV PRODUCTS PARAFLOW N35 HEAT EXCHANGER WITH: 150 PSI AT 239 DEGREES FAHRENHEIT TEST PRESSURE: 195 PSI OPERATING TEMPERATURE MAX/MIN: 239 DEGREES/ 32 DEGREES FAHRENHEIT PLATE DIMENSIONS: 33-3/8" AND 32-7/8" STAINLESS STEEL FLOOR MOUNTING PARAFLOW MODEL: N35

GRUNDFOS CRN15 CENTRIFUGAL PUMP W 10 HP MOTOR - USED GRUNDFOS CENTRIFUGAL PUMP WITH: BALDOR MOTOR: 10 HP 3500 RPM 90 GPM FRAME: 215TC 2 INCH INLET/OUTLET OVERALL DIMENSIONS: LENGTH: 34 INCHES WIDTH: 8 INCHES HEIGHT: 34.25 INCHES ELECTRICAL: 460 V 60 HZ PHASE 3 11.5 AMPS MODEL: CRN 15

139" BY 12" SMOOTH TOP BELT CONVEYOR WITH: INFEED HEIGHT: 37 INCHES CONVEYOR DIMENSIONS: LENGTH: 139 INCHES WIDTH: 12 INCHES VARIABLE FREQUENCY DRIVE 1/4 HORSEPOWER MOTOR ELECTRIC REQUIREMENTS: 90 VOLTS, 2.3 AMPS, 1 PHASE OVERALL DIMENSIONS: LENGTH: 144 INCHES WIDTH: 33 INCHES HEIGHT: 38 INCHES

FUJI FORMOST FW-3400 HORIZONTAL FORM FILL AND SEAL - USED FUJI FORMOST HORIZONTAL FLOW WRAPPER WITH: MAX PRODUCT WIDTH: 4.25 INCHES CENTERS: 7.5 INCHES SEAL JAW LENGTH: 8 INCHES DISCHARGE BELT DIMENSIONS: LENGTH: 30 INCHES WIDTH: 5.5 INCHES DISCHARGE HEIGHT: 34.5 INCHES EMERGENCY STOPS: 2 OVERALL DIMENSIONS: LENGTH: APPROXIMATELY 116 INCHES WIDTH: APPROXIMATELY 41 INCHES HEIGHT: APPROXIMATELY 82 INCHES MOTOR: 1440/1725/1740 RPM ELECTRICAL: 200/200/220 VOLTS, 50/60/60 HZ, 1.3/1.1/1.2 AMPS, PHASE 3

MARLO MRO-4V REVERSE OSMOSIS WATER SYSTEM - USED MARLO INCORPORATED SKID BASED REVERSE OSMOSIS WATER SYSTEM WITH: MODEL NUMBER IS MRO-16200-4H RO WITH MID-12G MEDIA FILTER AND ACA-14G-1 CARBON FILTER REVERSE OSMOSIS SYSTEM MODEL NUMBER IS MRO-29K SINGLE FILTER SYSTEM - TC MODEL NUMBER IS ACA-36G TWIN ALT. SOFTENER - NXT MODEL NUMBER IS MGT-600-2 JOB NUMBER IS EP-140263 3.8 GPM 5400 GPD OPERATING PRESSURE: 200-250 PSIG NOMINAL RECOVERY: 6575% NOMINAL SALT REJECTION: 9899% OPERATING TEMPERATURE: 4585 F MINIMUM INLET PRESSURE: 30 PSIG OVERALL DIMENSIONS: LENGTH: 132 INCHES WIDTH: 60 INCHES HEIGHT: 84 INCHES S/N: CS-070077-001-3

HOBART 4356 MIXER GRINDER - USED HOBART 4356 MIXER GRINDER WITH: PRODUCTION RATE: UP TO 160 POUNDS PER MINUTE CAPACITY: 500 POUNDS OVERALL DIMENSIONS: LENGTH: APPROXIMATELY 72 INCHES WIDTH: APPROXIMATELY 41 INCHES HEIGHT: APPROXIMATELY 96 INCHES STAINLESS STEEL CONSTRUCTION 0.5 HORSEPOWER MOTOR ELECTRICAL: 208-230/460 VOLTS, 60 HZ, PHASE 3

36" W HYDRAULIC MILD STEEL DRUM DUMPER WITH: BARREL HOLDER: WIDTH: UP TO 36 INCHES HEIGHT: INFINITE INCHES PIVOT: OFF THE GROUND: 28 INCHES OVERALL DIMENSIONS: HEIGHT: 107 INCHES WIDTH: 57 INCHES

TCJD42S41S4 AIR CONDITIONER - USED TCJD42S41S4 AIR CONDITIONER WITH: SERIAL #: W1H4945173 PRESSURE: HIGH SIDE: 448 PSIG LOW SIDE: 236 PSIG CONTAINS HIGH PRESSURE R-410A REFRIGERANT OVERALL DIMENSIONS: LENGTH: 28 INCHES WIDTH: 28 INCHES HEIGHT: 34 INCHES HORSEPOWER: 1/4 ELECTRICAL REQUIREMENTS: 208-230 VOLTS/ 60 HERTZ/ 1 PHASE

RAC13J424S21A AIR CONDITIONER - USED RAC13J424S21A AIR CONDITIONER WITH: SERIAL #: W1E5679825 PRESSURE: HIGH SIDE: 448 PSIG LOW SIDE: 236 PSIG CONTAINS HIGH PRESSURE R-410A REFRIGERANT OVERALL DIMENSIONS: LENGTH: 28 INCHES WIDTH: 28 INCHES HEIGHT: 34 INCHES HORSEPOWER: 1/4 ELECTRICAL REQUIREMENTS: 208-230 VOLTS/ 60 HERTZ/ 1 PHASE

[RAC13J424S21A] AIR CONDITIONER - USED RAC13J424S21A AIR CONDITIONER WITH: SERIAL #: W1E5679833 PRESSURE: HIGH SIDE: 448 PSIG LOW SIDE: 236 PSIG CONTAINS HIGH-PRESSURE R-410A REFRIGERANT OVERALL DIMENSIONS: LENGTH: 28 INCHES WIDTH: 28 INCHES HEIGHT: 34 INCHES HORSEPOWER: 1/4 ELECTRICAL REQUIREMENTS: 208-230 VOLTS/ 60 HERTZ/ 1 PHASE

RAC13J424S21A AIR CONDITIONER - USED RAC13J424S21A AIR CONDITIONER WITH: SERIAL #: W1E5679863 PRESSURE: HIGH SIDE: 448 PSIG LOW SIDE: 236 PSIG CONTAINS HIGH PRESSURE R-410A REFRIGERANT OVERALL DIMENSIONS: LENGTH: 28 INCHES WIDTH: 28 INCHES HEIGHT: 34 INCHES HORSEPOWER: 1/4 ELECTRICAL REQUIREMENTS: 208-230 VOLTS/ 60 HERTZ/ 1 PHASE

PALLET OF MOTORS INCLUDING BALDOR, US MOTORS, AND MARATHON - PALLET OF USED MOTORS FROM BALDOR, US MOTORS, AND MARATHON. MODELS INCLUDE VEM3558, M3550T-S, ECP3582T-4 AND MORE.

ESCHERICH ESUC 112 PHARMACEUTICAL DUST COLLECTOR - USED ESCHERICH DUST COLLECTOR WITH: AIR INTAKE DIAMETER: 150 MM EXHAUST AIR OUTPUT DIAMETER: 110 MM MAXIMUM AIR FLOW: 900 CUBIC METERS PER HOUR COMPRESSED AIR INPUT: 4 - 8 BAR OVERALL DIMENSIONS: WIDTH: 32 INCHES HEIGHT: 69 INCHES DEPTH: 25 INCHES ELECTRICAL: 3X400 VOLTS MODEL: ESUC

PENTAIR INTELLITOP 2.0 STAINLESS STEEL FLOW METERS - USED PENTAIR INTELLITOP FLOW METERS WITH: PENTAIR SUDMOS INNOVATION IN INTELLIGENT COMMUNICATION (VALVE CONTROL UNIT INTELLITOP 2.0) IS DESIGNED SPECIFICALLY TO INCREASE PLANT EFFICIENCY BY CONTROLLING, MONITORING AND REPORTING ON ALL PROCESS PLANT VALVE FUNCTIONS. FLOWTHROUGH RATE: 200 LITERS PER MINUTE NUMBER OF FLOW METER HEADS: 10 AMBIENT TEMPERATURE: 55 C MAGENTIC VALVES: 0-3 PATH MEASURING SYSTEM: LIFTING RANGE: 85 MM FEEDBACK: 3 TEACHABLE POSTIONS CONECTION FOR EXTERNAL SIGNAL STAINLESS STEEL CONSTRUCTION AIR REQUIREMENTS: OPERATING PRESSURE: 6 BAR CONTROL AIR PRESSURE: 6-8 BAR ELECTRICAL: 120 VOLTS LAST APPLICATION: CHILI S/N: 1195

[DYNARIC DF11] SEMI-AUTOMATIC ARCH CASE STRAPPER WITH: SEALING METHOD: HEAT SEAL ARCH DIMENSIONS: WIDTH: 36.5 INCHES HEIGHT: 32.5 INCHES TENSION RANGE: 10 TO 250 POUNDS INTERNAL STRAP DISPENSER STRAP WIDTH: 3/8 INCH 1/2 INCH TABLE HEIGHT: 31 INCHES MOUNTED ON CASTERS OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 36 INCHES HEIGHT: 60 INCHES ELECTRICAL: 115 VOLTS, 8.0 AMPS S/N: 8048

RITE HITE LITESPEED HIGH PERFORMANCE ROLL UP DOOR - USED RITE HITE LITESPEED ROLL UP DOOR WITH: LIFTING SPEED: UP TO 65 INCHES PER SECOND OVERALL DIMENSIONS WIDTH: 120 INCHES HEIGHT: 120 INCHES ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3 S/N: 151318

RITE HITE LITESPEED HIGH PERFORMANCE ROLL UP DOOR - USED RITE HITE LITESPEED ROLL UP DOOR WITH: LIFTING SPEED: UP TO 65 INCHES PER SECOND OVERALL DIMENSIONS WIDTH: 120 INCHES HEIGHT: 120 INCHES ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3 S/N: 151317

RITE HITE LITESPEED HIGH PERFORMANCE ROLL UP DOOR WITH: LIFTING SPEED: UP TO 65 INCHES PER SECOND OVERALL DIMENSIONS WIDTH: 120 INCHES HEIGHT: 120 INCHES ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3

BOSCH FORMING TUBES MODEL #: 5.00 SVE 3600

BOSCH FORMING TUBES MODEL: 230MM SVE3600

TEN USED BOSCH FORMING TUBES WITH: MODEL: SVE MODEL: SVE 3600

BOSCH FORMING TUBES WITH: MODEL: 3600 MODEL: 5.75 SVE 3600 SKIDDING, RIGGING, AND REMOVAL FEE: $50

STAINLESS STEEL PARTS CART ON WHEELS - USED STAINLESS STEEL PARTS CART ON WHEELS WITH: OVERALL DIMENSIONS: LENGTH: 84 INCHES WIDTH: 22 INCHES HEIGHT: 57 INCHES

SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 4 INCHES WIDTH: 1.5 INCH SEAL BAR LENGTH: 4 INCHES CHAIN LENGTH: 44 INCHES (2) LANES STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 51 INCHES WIDTH: 20 INCHES HEIGHT: 46 INCHES

ADVENT 300 SEMI-AUTOMATIC LABEL APPLICATOR - USED ADVENT LABELER WITH: SPEED: 12-15 JARS PER MINUTE CAP SIZE: 89 MILLIMETERS LABEL SIZE: LENGTH: 6 INCHES HEIGHT: 2.25 INCHES ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE

COBALT 100 SERIES SEMI-AUTOMATIC CASE FORMER - USED COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: *** NO TAPE HEAD *** USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY CASE DIMESNIONS: LENGTH: 7-24 INCHES WIDTH: 7-19 INCHES MINIMUM HEIGHT: 6 INCHES HAND ADJUSTMENTS SLIDING TAPE CARRIAGE BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING CASTERS ELECTRICAL: VOLTS: 115 FREQUENCY: 60HZ PHASE 1 AMPS: 15 AIR REQUIREMENTS: 80 PSI STAINLESS STEEL CONSTRUCTION MODEL: 100 SERIES

VERTICAL PICK AND PLACE BLUEPRINT AUTOMATION CASE PACKER - USED VERTICAL PICK AND PLACE BLUEPRINT AUTOMATION CASE PACKER: NO NAMEPLATE OR TAG LAST PACKING 6 TO A CASE LOADING CONVEYOR DIMENSIONS: 104 INCHES LONG 19 INCHES WIDE ALLEN-BRADLEY CONTROL SCREEN CONTROL PANEL WITH LIGHT STACK LEXAN GUARDING EMERGENCY PUSH BUTTON STOP SUCTION CUP PICK AND PLACE ELECTRICALS: 460 VOLTAGE / 3 PHASE

MEHEEN 6 HEAD FILLER/CROWNER - USED MEHEEN FILLER/CROWNER 6 HEAD FILLER/CROWNER SPEEDS: UP TO 36 BOTTLES PER MINUTE:DEPENDING ON APPLICATIONS AND SIZES RINSE RACK HOPPER DELIVERS CROWNS TO CROWNER BAR FOR FULLY AUTOMATED INDEXING AND CRIMPING COUNTER PRESSURE FILLING WITH CO2 PRE-PURGE TOUCH SCREEN CONTROLS ELECTRICAL: 115/240 FREQUENCY: 60 HZ PHASE 3 REQUIRED AIR: 40 PSI CURRENT SET UP: 22 OUNCE GLASS BOTTLES

HAYSSEN ULTIMA VERTICAL FORM FILL AND SEAL BAGGER ONLY - USED HAYSSEN ULTIMA WITH: OUTPUT: UP TO 100 BAGS PER MINUTE MINIMUM BAG DIMENSIONS: LENGTH: 3 INCHES WIDTH: 2 INCHES MAXIMUM BAG DIMENSIONS: LENGTH: 8 INCHES WIDTH: 8 INCHES AIR REQUIRMENTS: 65 PSI ELECTRICAL: 230 VOLTS, 1 PH, 60 HZ

SACMI LVS 360 LABEL INSPECTION SYSTEM - PERFORMS A CONTINUOUS CHECK OF CONTAINERS CAN BE APPLIED TO ANY TYPE OF LABELLING LINE INSPECTION CHAMBER VISION SYSTEM: PHOTOGRAPHED BY CAMERAS SIMULTANEOUSLY 3D RECONSTRUCTION SOFTWARE INSPECTS THE SIDE SURFACE OF CONTAINER MOUNTED ON ADJUSTABLE FEET PC PANEL ELECTRICAL PANEL: NEMA 4X ELECTRICALS: 480 VOLTAGE / 3 PHASE / 60 HERTZ / 6 AMPERAGE S/N: 10269295

SACMI 23 FEET LONG STEAM TUNNEL - USED SACMI STEAM TUNNEL WITH: PREVIOUSLY RUNNING 12 OUNCE TO 1 LITER PLASTIC BOTTLES NINE (9) VIEWING WINDOWS: 9.5 WIDTH X 13.5 HEIGHT (INCHES) APERTURE OPENING: 8 WIDTH X 25.5 HEIGHT (INCHES) ACTUAL WORKING APERTURE: 7 WIDTH X 15.75 HEIGHT (INCHES) CONVEYOR TRACK: 274 LENGTH X 7 WIDTH (INCHES) PRODUCT GUIDES INCLUDED ON CONVEYOR TRACK CONVEYOR HEIGHT FROM FLOOR: 46 INCHES DIAMETER OF EXHAUST VENT: 10.5 INCHES ANALOG CONTROLS WITH PUSH BUTTON RESETS AND INTERIOR LIGHTS ELECTRICALS: 480 VOLTAGE / 3 PHASE / 60 HERTZ S/N: 10266108

ADCO 12BC-125-SS GLUE AUTOMATIC HORIZONTAL END LOAD CARTONER - THE ADCO MANUFACTURING 12BC-125-SS IS AN AUTOMATIC HORIZONTAL END LOAD CARTONER. IT IS A CARTONING MACHINE KNOWN FOR ITS ABILITY TO AUTOMATICALLY STACK AND LOAD PRODUCTS INTO CARTONS. USED ADCO MANUFACTURING AUTOMATIC END LOAD CARTONER WITH: MODEL: 12BC-125-SS SPEEDS: UP TO 125 CARTONS PER MINUTE, DEPENDING ON PRODUCT AND APPLICATION INFEED CLEATED CONVEYOR WITH 45 DEGREE TURN: 12 INCH WIDTH CLEATS: 12 INCHES APART PRODUCT CONVEYOR: 14 INCH WIDTH WITH 6 INCH PRODUCT SECTIONS PRODUCT TAMP CARTON MAGAZINE: 72 LENGTH X 18 WIDTH (INCHES) MINIMUM CARTON DIMENSIONS: 1.5 LENGTH X 0.75 WIDTH X 6 DEPTH (INCHES) MAXIMUM CARTON DIMENSIONS: 9.5 LENGTH X 3 WIDTH X 10 DEPTH (INCHES) FOUR CHAIN LUG CONVEYOR CENTERS: 12 INCHES 4 PRODUCT PUSHERS CATCH CONVEYOR: 48 LENGTH X 12 WIDTH (INCHES) CARTON DISCHARGE BELT: 36 LENGTH X 11.625 WIDTH (INCHES) ALLEN BRADLEY CONTROLS WITH PUSH BUTTON EMERGENCY STOP NORDSON PROBLUE 7 GLUE UNIT ELECTRICALS: 460 VOLTAGE / 3 PHASE / 60 HERTZ / 30 AMPERAGE PREVIOUSLY RUNNING BOXES OF CRACKERS PREVIOUSLY RAN BOX DIMENSIONS: 5.66 WIDTH X 8 DEPTH X 2.25 HEIGHT (INCHES) SUITABLE FOR VARIOUS INDUSTRIES INCLUDING FOOD, PET FOOD, NUTRA PHARMA, COSMETIC AND MORE S/N: 5006HG

SACMI FORMSLEEVER 500 LABELER WITH: SPEEDS: UP TO 866 PER MINUTE SUITABLE FILMS: PET, OPS, PO, PVC, PLA, OPP AND OTHERS MAXIMUM LABEL SIZE: 175MM/6.9 INCHES MINIMUM LABEL SIZE: 30MM/1.2 INCHES MAXIMUM CONTAINER SIZE: 350MM/13.8 INCHES MINIMUM CONTAINER SIZE: 150MM/5.9 INCHES MAIN TURRET: CONTAINERS ARE ROTATED AROUND AXIS SO LABELS CAN BE APPLIED TUBULAR SLEEVE APPLIED SLEEVE CAN BE FULL OR PARTIAL BODY LABELING UNIT: PHOTOCELL NEAR INLET WHEEL GENERATES SIGNAL AND STARTS LABELING PROCESS LABELING TAPE TRANSFERRED FROM REEL TO DRIVE ROLLER DRIVE ROLLER ADJUSTS TO MAKE SURE CUTTING POINT IS CORRECT SOLVENT APPLIED TO LABEL AND SLEEVE IS SEALED REEL UNWINDER CONTROL CABINET ELECTRICALS: 480 VOLTAGE / 3 PHASE / 60 HERTZ OPERATION: AUTOMATICALLY LOADS, APPLIES WRAP AROUND LABELS TO CONTAINERS, AND THEN UNLOADS THEM CONTAINERS ENTER ON A SINGLE ROW CONVEYOR AND TRANSFERRED TO THE MAIN TURRET S/N: 10268926