Food Beverage Processing Packaging Equipment Auction

FOUR LANE 0.25 HP RIGHT FLOW PLASTIC MAT-TOP CONVEYOR - USED MAT-TOP CONVEYOR WITH: INFEED CONVEYOR DIMENSIONS: LENGTH: 214 INCHES WIDTH: 3.25 INCHES INFEED HEIGHT: 44.75 INCHES CONVEYOR DIMENSIONS: LENGTH (2): 205.5 INCHES LENGTH (2): 157.5 INCHES WIDTH: 7.5 INCHES PRODUCT FLOW: RIGHT TO LEFT ADJUSTABLE GUIDE RAILS THREADED LEVELER LEGS OVERALL DIMENSIONS: LENGTH: 225.5 INCHES WIDTH: 42 INCHES HEIGHT: 55 INCHES STAINLESS STEEL FRAME PREVIOUSLY USED IN BREWERY APPLICATION

USED HIBAR SERVO DISPENSING SYSTEM WITH: STAINLESS STEEL CONSTRUCTION 3.2 HORSEPOWER DIGITAL CONTROL PANEL EMERGENCY STOP ELECTRICAL REQUIREMENTS: 100/240 VOLTS, 50/60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 34 INCHES WIDTH: 19 INCHES HEIGHT: 28 INCHES

USED HIBAR SERVO DISPENSING SYSTEM WITH: STAINLESS STEEL CONSTRUCTION 3.2 HORSEPOWER DIGITAL CONTROL PANEL EMERGENCY STOP ELECTRICAL REQUIREMENTS: 100/240 VOLTS, 50/60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 34 INCHES WIDTH: 19 INCHES HEIGHT: 28 INCHES

TALON SUPRA MICROWAVE POPCORN BAG SEALER WITH: SPEED UP TO 90 BAGS PER MINUTE STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 460 VOLTS, 60 HERTZ, 3 PHASE

[1600-500] RYSON INCLINING 2 HP SPIRAL ELEVATOR CONVEYOR - USED RYSON DECLINING SPIRAL CONVEYOR WITH: CONVEYOR WIDTH: 20 INCHES WEIGHT CAPACITY: 50 POUNDS PER LINEAR FOOT TOTAL WEIGHT: UP TO 3600 POUNDS SPEED: UP TO 200 FEET PER MINUTE DEPENDING ON PRODUCT AND APPLICATION DISTANCE BETWEEN TIERS: 34 INCHES PRODUCT CLEARANCE: 28 INCHES INFEED HEIGHT: 18 INCHES DISCHARGE HEIGHT: 144 INCHES OUTSIDE DIAMETER: 85 INCHES CENTERLINE DIAMETER: 42 INCHES OVERALL DIMENSIONS: DIAMETER: 85 INCHES HEIGHT: APPROXIMATELY 150 INCHES DRIVE MOTOR: 2 HORSEPOWER ELECTRICAL: 3 PHASE, 60 HZ, 230/460 VOLTS PREVIOUSLY USED IN POPCORN FACILITY

USED SACMI LVS 360 LABEL INSPECTION SYSTEM WITH: PERFORMS A CONTINUOUS CHECK OF CONTAINERS CAN BE APPLIED TO ANY TYPE OF LABELLING LINE INSPECTION CHAMBER VISION SYSTEM: PHOTOGRAPHED BY CAMERAS SIMULTANEOUSLY 3D RECONSTRUCTION SOFTWARE INSPECTS THE SIDE SURFACE OF CONTAINER MOUNTED ON ADJUSTABLE FEET PC PANEL ELECTRICAL PANEL: NEMA 4X ELECTRICALS: 480 VOLTAGE / 3 PHASE / 60 HERTZ / 6 AMPERAGE S/N: 10269295

IMS CONDUCTION SEALER WITH: PRODUCTION SPEED: 18-20 BOTTLES PER MINUTE PREVIOUS APPLICATION: SPECIALTY PLASTIC BOTTLE POLYESTER FILM SEAL SIZES: 2.25 INCHES, 2.5 INCHES, 6.5 INCHES CONVEYOR DIMENSIONS: LENGTH: 7 FEET WIDTH: 4.5 INCHES HEIGHT: 32 INCHES TALL FILM DIMENSIONS: OVERALL DIAMETER: 14 INCHES WIDTH: 3.25 INCHES SCREW DIMENSIONS: FLIGHT: 3 INCHES LENGTH: 41 INCHES ELECTRICAL: 3 PHASE, 230 VOLTS, 60 HERTZ STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 9 FEET WIDTH: 5 FEET HEIGHT: 6.5 FEET S/N: IPS-1007-1214

M. TANNER AG SBT-2213 PREFORM DUMPER AND LIVE-BOTTOM HOPPER - USED TANNER PREFORM DUMPER AND HOPPER WITH: CAPACITY: 130 CUBIC FEET DUMP HEIGHT: 84 INCHES HOPPER CAPACITY: LENGTH: 75 INCHES WIDTH: 75 INCHES DEPTH: 40 INCHES BELT CAPACITY: LENGTH: 76 INCHES WIDTH: 18 INCHES INFEED HEIGHT: 73 INCHES CART DIMENSIONS: LENGTH: 21 INCHES WIDTH: 26 INCHES DUMPER INTERIOR DIMENSIONS: LENGTH: 62 INCHES WIDTH: 48 INCHES DEPTH: 58 INCHES HOPPER ACCESS DOOR: LENGTH: 20 INCHES WIDTH: 11.25 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL: 3 X 400 VOLTS, 50/60 HZ

DIOSNA STAINLESS STEEL HOPPER WITH BOWL CLAW, LOAD CELLS, AND CONTROL PANEL - USED DIOSNA HOPPER WITH: HOPPER CAPACITY: 15.7 CUBIC FEET HOPPER DIMENSIONS: WIDTH: 42 INCHES LENGTH: 44 INCHES DEPTH: 40 INCHES DISCHARGE HEIGHT: 45 INCHES TOUCH SCREEN CONTROLS VARIABLE FREQUENCY DRIVE OPEN/CLSOE SLIDE GATE PUSH BUTTON CONTROL LIGHT CURTAINS ELECTRICAL REQUIREMENTS: 480 VOLTS 60 HZ 3 PHASE STAINLESS STEEL CONSTRUCTION S/N: 0917-0335

VAC-U-MAX PNEUMATIC CONVEYING SYSTEM WITH: HOPPER DIAMETER: 24 INCHES SIDE INFEED DIAMETER: 4.75 INCHES SMALLER TOP INFEED DIAMETER: 2 INCHES LARGER TOP INFEED DIAMETER: 3 INCHES REMOVAL LID STAINLESS STEEL CONSTRUCTION (4) LOCKABLE CASTERS S/N: C-1272035

HUDSON SHARP NG4331018 GLOVE LINE - USED GLOVE LINE WITH: PRODUCTION SPEED: UP TO 400 PIECES PER MINUTE, DEPENDING ON APPLICATION UNWIND SHAFT FILM DIAMETER: 20 INCHES EXIT CONVEYOR DIMENSIONS: LENGTH: 90 INCHES WIDTH: 40 INCHES TURNING BAR ANGLE: 45 MACHINE OVERVIEW: UNWINDER V-FOLDER CUFF CUT PUNCH SECTION MAIN NIP SECTION HEAT SEAL SECTION EXIT CONVEYOR GLOVE STACK QUANTITY CONTROL THREAD SPEED CONTROL TOGGLE BETWEEN PICK 2 AND PICK 4 GLOVES LIFETIME PRODUCT COUNT HMI TOUCHSCREEN INTERFACE PUSH BUTTON CONTROLS ELECTRICAL REQUIREMENTS: 240/480 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 242 INCHES WIDTH: 72 INCHES HEIGHT: 97 INCHES LAST USED FOR PRODUCTION OF FOOD SERVICE GLOVES

RONTECH FRICTION FEEDER MF WITH: SPEED: UP TO 2500 PRODUCTS PER MINUTE, DEPENDING ON APPLICATION PRODUCT THICKNESS: UP TO 20 MILLIMETERS MAXIMUM PRODUCT DIMENSIONS: LENGTH: 1500 MILLIMETERS WIDTH: 530 MILLIMETERS MINIMUM PRODUCT DIMENSIONS: LENGTH: 30 MILLIMETERS WIDTH: 30 MILLIMETERS INFEED CONVEYOR DIMENSIONS: LENGTH: 82 INCHES WIDTH: 3 INCHES MAXIMUM WIDTH: 6 INCHES DISCHARGE DIMENSIONS: LENGTH: 14 INCHES WIDTH: 6.5 INCHES HEIGHT: 40 INCHES POSITIONING ACCURACY: +/- 1 MILLIMETER HMI ROTATABLE 8.4 INCH COLOR TOUCH SCREEN SERVO DRIVEN STAINLESS STEEL CONSTRUCTION AIR PRESSURE: 5 BAR ELECTRICAL REQUIREMENTS: 230 VOLTS, 50/60 HERTZ S/N: 13-3321

[NALCO XL-3L-4H] STAINLESS STEEL REVERSE OSMOSIS NITRATE REMOVALE SYSTEM - USED NALCO XL-3L-4H NITRATE REMOVAL SYSTEM WITH: (4) REVERSE OSMOSIS NITROGEN REMOVAL CHAMBERS: TYPE: CODE LINE PRESSURE VESSELS LENGTH: 144 INCHES DIAMETER: 8 INCHES (APPROXIMATELY) MAXIMUM OPERATING PRESSURE: 300 PSI MINIMUM OPERATING TEMPERATURE: 20F MAXIMUM OPERATING TEMPERATURE: 120 F HOLDING SINGLE WALL TANK CAPACITY: 55 GALLONS TANK INTERNAL DIMENSIONS (INCHES): LENGTH: 24 WIDTH: 24 HEIGHT: 24 SHELCO 5F0S4-CIW-R CARTRIDGE FILTER: MAXIMUM OPERATION PRESSURE: 150 PSI INLET AND OUTLET CONNECTIONS: 2 INCHES GRANDFOUS SERVO PUMP: 15 HORSEPOWER LIQUID REMOVAL PUMP: 5 HORSEPOWER CENTRIFUGAL PUMP RECIRCULATION FLOW METER OVERALL DIMENSIONS (INCHES): LENGTH: 144 WIDTH: 52 HEIGHT: 80 HOLDING TANK OVERALL DIMENSIONS (INCHES): LENGTH: 24 WIDTH: 24 HEIGHT: 49 UNIT MOUNTED ON FRAME ELECTRICAL REQUIREMENTS: 3 PHASE, 60 HERTZ, 460 VOLTS LAST APPLICATION: CHEESE FACILITY S/N: 207746

BALDOR RELIANCE M44352T-4 350 HORSEPOWER MOTOR WITH FRAME SIZE 449TS - USED BALDOR 350 HORSEPOWER MOTOR WITH: HORSEPOWER: 350 RPM: 3570 FRAME SIZE: 449TS ENCLOSURE: TEFC SPEC NO: P44G3925 OVERALL DIMENSIONS (INCHES): LENGTH: 50 WIDTH: 39 HEIGHT: 25 AMBIENT TEMPERATURE: 40 C FRAME MATERIAL: IRON INSULATION CLASS: F PULLY END BEARING TYPE: BALL SPEED CODE: SINGLE SHAFT ROTATION: REVERSABLE WEIGHT: 2922 POUNDS ELECTRICAL: 3 PHASE, 60 HERTZ, 460 VOLTS, 375 AMPS

MULTIPLE SECTIONS OF PAINTED BASE CONVEYOR FRAMES - USED CONVEYOR FRAMES WITH: (1) CONVEYOR FRAME: CONVEYOR DIMENSIONS: LENGTH: 100 INCHES WIDTH: 4.5 INCHES HEIGHT: 15 INCHES (3) POLES HEIGHT: 86 INCHES (2) FRAME LEG DIMENSIONS: LENGTH: 105 INCHES WIDTH: 10.5 INCHES (1) CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 154 INCHES WIDTH: 14 INCHES HEIGHT: 18 INCHES (2) POLE HEIGHT: 108 INCHES OVERALL DIMENSIONS: LENGTH: 154 INCHES WIDTH: 22 INCHES HEIGHT: 36 INCHES (1) CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 150 INCHES WIDTH: 12 INCHES OVERALL DIMENSIONS: LENGTH: 150 INCHES WIDTH: 22 INCHES HEIGHT: 20 INCHES (4) CONVEYORS: CONVEYOR DIMENSIONS: LENGTH: 104 INCHES WIDTH: 4.5 INCHES HEIGHT: 10 INCHES (1) CORNER CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 110 INCHES WIDTH: 12 INCHES OVERALL DIMENSIONS LENGTH: 110 INCHES WIDTH: 22 INCHES HEIGHT: 18 INCHES (1) CONVEYOR CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 4.5 INCHES (1) CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 156 INCHES WIDTH: 12 INCHES OVERALL DIMENSIONS: LENGTH: 156 INCHES WIDTH: 24 INCHES HEIGHT: 42 INCHES (1) DUAL LANE CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 70 INCHES WIDTH: 5 INCHES (2) DUAL LANE CONVEYORS CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 4.5 INCHES HEIGHT: 8 INCHES (2) DUAL LANE CONVEYORS CONVEYOR DIMENSIONS LENGTH: 132 INCHES WIDTH: 4.5 INCHES HEIGHT: 8 INCHES (2) CONVEYORS: CONVEYOR DIMENSIONS: LENGTH: 80 INCHES WIDTH: 4.5 INCHES (2) POLE HEIGHT: 104 INCHES (2) TRANSFER CONVEYORS: CONVEYOR DIMENSIONS: LENGTH: 28 INCHES WIDTH: 6 INCHES OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 32 INCHES HEIGHT: 57 INCHES (5) MISCELLANEOUS OVERHEAD CORNER CONVEYORS CRATE OF SUPPORT EQUIPMENT FOR CONVEYORS

TAWI VACUMOVE VM40 VACUUM BOX LIFT ASSIST WITH: CAPACITY: 30 KILOGRAMS HANDLE TYPE (3): FLEX INNER HANDLE: 300 MILLIMETERS OUTER HANDLE: 700 MILLIMETERS PUMP TYPE (3): LARGE PUMP VACUUM LEVEL: 60 PERCENT VACUUM FLOW: 235M3/H LIFTING HEIGHT SPECIFICATIONS: MINIMUM: 3050 MILLIMETERS MAXIMUM: 50 MILLIMETERS SUSPENSIONS HEIGHT: 4301 MILLIMETERS TRIPLE GANTRY BRIDGE CRANE DIMENSIONS: BRIDGE (LENGTH): 40 FEET RUNWAYS (WIDTH): 19 FEET GALLOW SUPPORT POSTS (PAIR) DIMENSIONS: HEIGHT: 14 FEET (OVERALL HEIGHT) BASEPLATES: 15 INCHES X 15 INCHES ELECTRICAL: 460 VOLTS, 3 PHASE, 60 HERTZ

APPROXIMATELY 32 STAINLESS STEEL HEAT EXCHANGE PLATES 30 INCH TALL BY 10 INCH WIDE - USED PLATE HEAT EXCHANGER WITH: APPROXIMATELY 32 PLATES DIMENSIONS: WIDTH: 10 INCHES HEIGHT: 30 INCHES STAINLESS STEEL CONSTRUCTION

SURE CHEF SCR-8 STAINLESS STEEL ROTISSERIE UP TO 2.5 POUNDS OF CHICKEN - USED HENNY PENNY CONTINUOUS ROTISSERIE OVEN WITH: CAPACITY: 2.5 LBS (1.1 KG) OF WHOLE CHICKENS OVERALL DIMENSIONS: LENGTH: 30 INCHES WIDTH: 54 INCHES HEIGHT: 81 INCHES CHAMBER DIMENSIONS: WIDTH: 29 INCHES DEPTH: 22 INCHES RACK DIMENSIONS: LENGTH: 6 INCHES WIDTH: 27 INCHES DEPTH: 2.5 INCHES NUMBER OF RACKS: 8 TABLE-MOUNTED HEATING METHOD: ELECTRIC CONVECTION AND RADIANT LIGHTING: 4 TUNGSTEN HALOGEN LAMPS ELECTRICAL: 208 V, 53.4 A, 50/60 HZ, 11.1 KW, 1-PHASE, 2+G WIRE S/N: 1T078T1

ADVENT 300 SEMI-AUTOMATIC LABEL APPLICATOR - USED ADVENT LABELER WITH: SPEED: 12-15 JARS PER MINUTE CAP SIZE: 89 MILLIMETERS LABEL SIZE: LENGTH: 6 INCHES HEIGHT: 2.25 INCHES ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE

[SAMUEL SP-1E] STRAPPER WITH: USES 3/8" OR 1/2" WHITE POLYPROPYLENE STRAPPING STRAPPING TABLE DIMENSIONS: LENGTH: 35 INCHES WIDTH: 22 INCHES MOTOR: 0.25 HORSEPOWER PUSH BUTTON CONTROLS OVERALL DIMENSIONS: LENGTH: 35 INCHES WIDTH: 22 INCHES HEIGHT: 29 INCHES ON CASTERS ELECTRICALS: 1 PHASE, 60 HERTZ, 110 VOLTS

BESELER T-15-12 15" W X 12" T HEAT TUNNEL - USED BESELER HEAT TUNNEL WITH: APERTURE: WIDTH: 15 INCHES HEIGHT: 12 INCHES CONVEYOR DIMENSIONS: LENGTH: 72 INCHES WIDTH: 13 INCHES ADJUSTABLE TEMPERATURE CONTROLS ELECTRICAL: 220 VOLTS, 60 HERTZ, 3 PHASE S/N: 00298134

SENCORP CERATEK 12ASL/1 STAINLESS STEEL LABORATORY HEAT SEALER - USED SENCORP CERATEK LABORATORY HEAT SEALER WITH: TIMING RANGE: 0.01 TO 99.99 SECONDS REMOVABLE WORK SURFACE DIMENSIONS: WIDTH: 12 INCHES DEPTH: 12 INCHES SERRATED SEALING DIE WIDTH: 1 INCH REPEAT ACCURACY: 0.2 SECONDS TEMPERATURE RANGE: MINIMUM: AMBIENT MAXIMUM: 400 F DISPLAY ACCURACY: 2% OF SETPOINT TEMPERATURE PROFILE RANGE: 2% OF ACTUAL PRESSURE RANGE: 5 TO 100 PSI REGULATOR REPEATABILITY: 3.6 PSI GAUGE ACCURACY: 2.5% OF FULL SCALE OVERALL DIMENSIONS: WIDTH: 16.25 INCHES DEPTH: 19.38 INCHES HEIGHT: 21.13 INCHES STAINLESS STEEL CONSTRUCTION PNEUMATIC REQUIREMENTS: 125 PSI MAXIMUM ELECTRICAL: 1 PHASE, 60 HZ, 115 VOLTS S/N: 06-04350

USED AIDLIN ORIENTER WITH: DUAL LANE FINGER ORIENTATION CAP SIZE: 4 INCH WIDE X 1 INCH HIGH PUSH BUTTON START/STOP SWITCHES MOUNTED ON MILD STEEL FRAME S/N: 92303785

ROTATING FILLER FRAME WITH: NOZZLE DIAMETER: 3/4 INCHES STATION DIMENSIONS: LENGTH: 6.5 INCHES WIDTH: 3.25 INCHES (24) STATIONS TOUCHSCREEN HMI ELECTRICAL REQUIREMENTS: 130 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 39 INCHES WIDTH: 50 INCHES HEIGHT: 75 INCHES

[INTEGRITY MACHINE SERVICES] FIVE HEAD FOIL SEALER - USED INTEGRITY MACHINE FOIL SEALER WITH: 5 HEAD FOIL APPLICATION UP TO 90 TABS PER MINUTE DEPENDING ON PRODUCT TAB SIZE: 38 MILIMETER INCLUDES PRODUCT CONVEYOR 4.5 INCH WIDTH 58 INCH LENGTH 42 INCH INFEED/DISCHARGE HEIGHT ELECTRICAL: 240 VOLTS, 60 HZ, PHASE 1 S/N: S 10001 1015

HYTROL CASE BELT CONVEYOR 8 X 70 - USED HYTROL CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 70 INCHES WIDTH: 8 INCHES INFEED/DISCHARGE HEIGHT: 34 INCHES HORSEPOWER: 0.5 ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 60 HERTZ, 3 PHASE MOUNTED ON CASTERS PAINTED MILD STEEL FRAME

USED METRO C569-NDS-U HEATING CABINET WITH: FULL SIZE PAN CAPACITY: 17 PANS PAN SIZE: HALF SIZE: LENGTH: 12 INCHES WIDTH: 20 INCHES FULL SIZE: LENGTH: 18 INCHES WIDTH: 26 INCHES ADJUSTABLE WIRE SLIDE SPACING: 1.5 INCHES ALUMINUM CONSTRUCTION PUSH BUTTON CONTROLS ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 32 5/8 INCHES WIDTH: 29 1/8 INCHES HEIGHT: 74 3/4 INCHES S/N: C56E0101362

BIG JOE 1518-R6 STACKER WITH STAINLESS STEEL PLATFORM - USED BIG JOE 1518-R6 STACKER WITH: CAPACITY: 1500 POUNDS LOAD CENTER: 18 INCHES STAINLESS STEEL PLATFORM: LENGTH: 36 INCHES WIDTH: 36 INCHES (4) WHEELS S/N: 83836

ROBERTS POLYPRO 2149000X AUTO HANDLE APPLICATOR - USED ROBERTS POLYPRO 2149000X HANDLE APPLICATOR WITH: AUTOMATIC, SINGLE LANE HANDLE APPLICATOR PREVIOUSLY USED TO ATTACH PET HANDLES TO 1 GALLON WATER CONTAINERS MORRISON HANDLING SOLUTIONS TIMING SCREW INFEED RIGHT TO LEFT PRODUCT FLOW 4 HEAD ROTARY HANDLE APPLICATOR PUSHES PET HANDLE OVER NECK OF CONTAINER CAN INTEGRATE OVER AN EXISTING CONVEYOR REXROTH TOUCH SCREEN HMI

CRATED MISCELLANEOUS R&D EQUIPMENT - SKIDDING, RIGGING, AND LOADING FEE: $141.00

WP KEMPER STREUSTATION 53" WIDE X 40" LONG STEEL WIRE CONVEYOR WITH: CONVEYOR DIMENSIONS: 53 INCHES WIDE X 40 INCHES LONG ADJUSTABLE LEVELING FEET STAINLESS STEEL CONSTRUCTION

USED MATEER PACKAGING HEAD WITH: HORSEPOWER: 1/2 ROTATIONS PER MINUTE: 1725 STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 60 HERTZ, 3 PHASE HEAD ONLY S/N: 202001

[1/2 HORSEPOWER] [1725 ROTATIONS PER MINUTE] [STAINLESS STEEL CONSTRUCTION] [ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 60 HERTZ, 3 PHASE] HEAD ONLY

MATEER PACKAGING HEAD HORSEPOWER: 1/2 ROTATIONS PER MINUTE: 1725 STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 60 HERTZ, 3 PHASE S/N: 201803

USED POWER FIST TWO TON LOW PROFILE CRANE WITH: CAPACITY: MAXIMUM: 2 TONS LIFTING INCREMENTS: .5 - 2 TONS HOIST: WIDTH: 26 INCHES LENGTH: 53 INCHES PLATFORM: WIDTH: 32 INCHES LENGTH: 47 INCHES

UMS UMS-16M-22MM HYDRAULIC PORTABLE INJECTION MANIFOLD - USED UMS HYDRAULIC PORTABLE INJECTION MANIFOLD WITH: SCREW: 16 MILLIMETERS INJECTION STROKE: 4 INCHES SHOT VOLUME: 1.25 CUBIC INCHES CAPACITY: 0.5 OUNCES INJECTION PRESSURE: 27,000 PSI INJECTION VELOCITY: 7.1 INCHES PER SECOND VOLUMETRIC INJECTION: 2.21 CUBIC INCHES PER SECOND SCREW SPEED: 350 ROTATIONS PER MINUTE ELECTRICAL REQUIREMENTS: 480 VOLTS, 60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 1405 MILLIMETERS WIDTH: 390 MILLIMETERS HEIGHT: 455 MILLIMETERS S/N: 103455-01

880 POUND CAPACITY MOBILE TABLE LIFT - USED TABLE LIFT WITH: CAPACITY: 880 POUNDS MANUAL RAISING AND LOWERING PLATFORM DIMENSIONS: LENGTH: 24 INCHES WIDTH: 22.5 INCHES (4) CASTER WHEELS

AUTOMATED CONVEYOR SYSTEM INC DC DRAG CHAIN CONVEYOR WITH: MODEL: DC CAPACITY: 10,000 POUNDS SPEED : 30 FPM CONSTANT SPEED QUIET OPERATION LOW PROFILE: 12 INCH ELEVATION FRAME : 7 GAUGE POWDER PAINTED FORMED STEEL CHANNEL FRAME CHAIN: (2) 60F SINGLE PITCH CONVEYOR CHAINS, STRAIGHT SIDE BAR, ON 36 INCH CENTERS CHAIN GUIDE: UHMW MOTOR: 1 HP 230/460-3-60 TE MOTOR, C-FACE. MOTOR AND SPEED REDUCER ARE LOCATED UNDERNEATH CONVEYOR FRAME SPEED REDUCER: HEAVY DUTY WORM GEAR FOR C-FACE MOUNTED MOTOR SPROCKETS: HARDENED SPROCKETS WITH 1-15/16 INCH DIAMETER CRS DRIVE SHAFT BEARINGS : SEALED DODGE PRE-LUBRICATED WITH CAST IRON S/N: 280806

20 HORSEPOWER MOTOR - USED NAE 20 HP MOTOR WITH: HORSEPOWER: 20 / 15 RPM: 3540 / 2935 OVERALL DIMENSIONS (INCHES): LENGTH: 19 WIDTH: 15 HEIGHT: 14 ENCLOSURE: TEFC NEMA DESIGN: B HIGH STARTING TORQUES AMBIENT CONTINUOUS DUTY: 40 C ALL STAINLESS STEEL CONSTRUCTION WASHDOWN ELECTRICAL: 3 PHASE, 60 HERTZ, 208-230/460, 50-46/23 AMPS 3 PHASE, 50 HERTZ, 190/380 VOLTS, 42/21 AMPS S/N: 1003002

64" L X 33" W TRANSFER CONVEYOR - USED TRANSFER CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 64 INCHES WIDTH: 33 INCHES INFEED HEIGHT: 22 INCHES DISCHARGE HEIGHT: 22 INCHES

64" L X 33" W TRANSFER CONVEYOR - USED TRANSFER CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 64 INCHES WIDTH: 33 INCHES INFEED HEIGHT: 22 INCHES DISCHARGE HEIGHT: 22 INCHES

[64" L X 33" W] TRANSFER CONVEYOR - USED TRANSFER CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 64 INCHES WIDTH: 33 INCHES INFEED HEIGHT: 17 INCHES DISCHARGE HEIGHT: 17 INCHES

TRANSFER CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 64 INCHES WIDTH: 33 INCHES INFEED HEIGHT: 24 INCHES DISCHARGE HEIGHT: 24 INCHES

[64" L X 33" W] TRANSFER CONVEYOR - USED TRANSFER CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 64 INCHES WIDTH: 33 INCHES INFEED HEIGHT: 17 INCHES DISCHARGE HEIGHT: 17 INCHES

64" L X 33" W TRANSFER CONVEYOR - USED TRANSFER CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 64 INCHES WIDTH: 33 INCHES INFEED HEIGHT: 24 INCHES DISCHARGE HEIGHT: 24 INCHES

66" L X 36" W TRANSFER CONVEYOR - USED TRANSFER CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 66 INCHES WIDTH: 36 INCHES INFEED HEIGHT: 24 INCHES DISCHARGE HEIGHT: 24 INCHES MOTOR: 2 HORSEPOWER, 208-230/460 VOLTS, 5.7-5.4/2.7 AMPS, 60 HERTZ, 3 PHASE

[PENTAIR INTELLITOP 2.0] STAINLESS STEEL FLOW METERS - USED PENTAIR INTELLITOP FLOW METERS WITH: PENTAIR SUDMOS INNOVATION IN INTELLIGENT COMMUNICATION (VALVE CONTROL UNIT INTELLITOP 2.0) IS DESIGNED SPECIFICALLY TO INCREASE PLANT EFFICIENCY BY CONTROLLING, MONITORING AND REPORTING ON ALL PROCESS PLANT VALVE FUNCTIONS. FLOWTHROUGH RATE: 200 LITERS PER MINUTE NUMBER OF FLOW METER HEADS: 10 AMBIENT TEMPERATURE: 55 C MAGENTIC VALVES: 0-3 PATH MEASURING SYSTEM: LIFTING RANGE: 85 MM FEEDBACK: 3 TEACHABLE POSTIONS CONECTION FOR EXTERNAL SIGNAL STAINLESS STEEL CONSTRUCTION AIR REQUIREMENTS: OPERATING PRESSURE: 6 BAR CONTROL AIR PRESSURE: 6-8 BAR ELECTRICAL: 120 VOLTS LAST APPLICATION: CHILI S/N: 1195

125 GALLON STAINLESS STEEL SINGLE WALL TANK - USED SINGLE WALL TANK WITH: CAPACITY: 125 GALLONS TANK DIMENSIONS: DIAMETER: 28 INCHES HEIGHT: 54 INCHES SIDE BOTTOM DISCHARGE DIAMETER: 2 INCHES CENTER TOP INLET DIAMETER: 2 INCHES STAINLESS STEEL CONSTRUCTION

[20 CUBIC FOOT MILD STEEL POWDER HOLDINGS HOPPER WITH SLIDE DISCHARGE] HOPPER CAPACITY: 20 CUBIC FOOT MILD STEEL CONSTRUCTION SLIDE GATE DISCHARGE TOP DUST COLLECTION PORT: 3.75 INCH DIAMETER

USED TRUE TSSU-60-24M-B-ST STAINLESS STEEL REACH-IN PREP TABLE - USED TRUE REACH-IN REFRIGERATOR WITH: HELD TEMPERATURE RANGE: BETWEEN 33 F AND 41 F REMOVABLE POLYETHYLENE CUTTING BOARD DIMENSIONS: WIDTH: 60.375 INCHES DEPTH: 8.875 INCHES HEIGHT: 0.5 INCHES SHELVES (4): CONSTRUCTION: PVC COATED WIRE DIMENSIONS: WIDTH: 27.5 INCHES DEPTH: 16 INCHES EPOXY COATED EVAPORATOR STAINLESS STEEL FOAM INSULATED LIDS (2) OVERALL DIMENSIONS: WIDTH: 60.375 INCHES DEPTH: 34.125 INCHES HEIGHT: 40.375 INCHES ALUMINUM BACK CONSTRUCTION STAINLESS STEEL FRONT AND SIDE EXTERIOR SURFACES MOTOR: 0.33 HORSEPOWER ELECTRICAL: 1 PHASE, 60 HZ, 115 VOLTS