Complete Tube Mill Lines from a Major Stainless Steel Tube Producer

BARNES 3 HEAD ID TUBE POLISHER, 4IN TO 3/4IN TUBE DIAMETER, 20FT MAX LENGTH, INCLUDING (NEW) TUBE LOADING SYSTEM, AUTO LOAD, DRO, BLOW OUT SECTION AND DUST COLLECTOR, KLEENALL CHIP FILTRATION SYSTEM, DUAL SPEED S/N:605153L

TIG TUBE MILL LINE, 1/4IN TO 1/2IN TUBE DIAMETER, 0.02 TO 0.035IN WALL THICKNESS, 35FPM LINE SPEED; WITH 4000LB MANDREL UNCOILER; FORMING MILL; 2-ROLL WELDBOX, TIG WELDER WITH ARC PRODUCTS MA20 DIRECT CONTROLLER; MOTORIZED BEAD ROLLER; BARRELL TYPE INLINE ANNEALING, NITROGEN/HYDROGEN, WITH TEMP CONTROLLER, DRO; COOLING BOX; POST-SIZING SYSTEM; EDDY CURRENT TESTER; CUTOFF SAW (605153G)

YODER TUBE MILL LINE, 0.5 TO 1.5IN TUBE DIAMETER, STAINLESS, (NO WELDER); WITH AMERICAN STEEL LINE 4000LB MANDREL UNCOILER; YODER FORMING MILL, WITH CENTER POINT ADJUSTMENT; 2-ROLL WELDBOX WITH RP1 WELD CONTROLLER, GAS MIXERS, RAFTER SINGLE STAND, MAG BEAD ORIENTATION, HAMMER BEAD ROLLING STAND; 5-ZONE BRIGHT ANNEALING, HYDROGEN/NITROGEN, WITH TEMP CONTROLLER, IRCON PLUS INFRARED THERMOMETER (3 POINT CONTROLLER); TURKS HEAD; EDDY CURRENT TESTER; WASH BATH; CUTOFF SAW; INLINE BRUSH DE-BURR; AB DROS; TOOLING 0.625/0.75/0.875/1.0/1.125/1.5IN (S/N: 605153D)

TIG TUBE MILL LINE, 1/4 TO 1/2IN TUBE DIAMETER, 0.02 TO 0.035IN WALL DIAMETER, 35FPM LINE SPEED; WITH 4000LB MANDREL UNCOILER; FORMING MILL; 2-ROLL WELDBOX, TIG WELDER WITH ARC PRODUCTS MA20 DIRECT CONTROLLER; MOTORIZED BEAD ROLLER; BARRELL TYPE INLINE ANNEALING, NITROGEN/HYDROGEN, WITH TEMP CONTROLLER, DRO; EDDY CURRENT TESTER; TRITON 360 MEASUREMENT AND OVALITY LASER; CUTOFF SAW (605153H)

YODER TUBE MILL LINE, 0.5 TO 1.5IN TUBE DIAMETER, STAINLESS; COMPLETE LINE, WITH AMERICAN STEEL LINE 6000LB UNCOILER; YODER FORMING MILL, SINGLE POINT ADJUSTMENT; 2-ROLL WELDBOX WITH CYCLOMATIC 90A ARC PATTERN CONTROLLER, HAMMER FORGE SEAM ROLLER, AND AB DROS; INLINE BRIGHT ANNEALING WITH HEATING AND TEMP CONTROLLERS; TURKS HEAD; EDDY CURRENT TESTER; CUTOFF SAW; DROS; TOOLING 0.625/0.750/0.875/1.00/1.125/1.5IN (S/N: 605153N)

YODER TIG TUBE MILL LINE, 5/8IN TO 2IN TUBE DIAMETER, STAINLESS; COMPLETE LINE, INCLUDING 4000LB AMERICAN STEEL LINE UNCOILER; INCLUDING YODER FORMING MILL, SINGLE POINT ADJUSTMENT; 2-ROLL WELDBOX, TIG WELDER MODEL 90A WITH CYCLOMATIC ARC PATTERN CONTROLLER; WELD BEAD ORIENTATION WITH 4-ROLL 2-PLANE STRAIGHHTENER; HIGH PRESSURE WASH; INDUCTION HEATER; 6-ZONE BRIGHT ANNEALING; TURKS HEAD; MODINE 3 DIGITAL TEMP CONTROLLER; EDDY CURRENT TESTER; CUTOFF SAW; DOUBLE END BRUSH DE-BURR; AB TOUCHSCREEN DRO; DIGITAL PRODUCTION SCREEN; TOOLING 0.625/0.75/0.875/1.0/1.125/1.5IN (605153C)

2007 T-DRILL TCC-28 RL 8000 AUTOMATIC COIL TUBE CUTTING MACHINE, TYPE 8319, 1/4IN TO 1.125IN TUBE DIAMETER, 2IN MINIMUM CUT LENGTH, 3000 PCS/HOUR, 3 SEC CYCLE TIME, 26FT ENTRY TUBE LENGTH, CLEAN CUT, EXIT PIPE SORTER, PROGRAMMABLE (S/N: 605153M)

2005 HDC 55 COIL BUILDUP WINDER LINE INCLUDING (2) POWERED COILERS, GUIDE ROLLS, KENT PLANISHER, TULSA POWER SUPPLY

2015 ACME 4-HEAD TUBE POLISHING LINE, 8IN OD MAX, CENTERLESS, 20FT MAX LENGTH, 134HP, INCLUDING ENTRY SORTING TABLE, AUTOFEED, VARIABLE BELT TENSION, AUTO REJECT, CONVEYOR OUTFEED AND STACKING TABLE (S/N: 605153K)

TIG TUBE MILL LINE, CANTILEVER DESIGN MILL, 1/4 TO 1/2IN TUBE DIAMETER; INCLUDES FORMING MILL, 2-ROLL WELDBOX WITH CYCLOMATIC MAGNETIC ARC CONTROLLER, COOLING BATH; SINGLE HEAD MOTORIZED BEAD CONDITIONER; 2-STAND SIZING MILL, WITH MULTIMAC ECT, DROS; CUTOFF SAW; MACKINTOSH HEMPHILL 6-ROLL STRAIGHTENER, EDDY CURRENT TESTER (605153E)

TUBE MILL LINE, 1/4IN TO 1/2IN TUBE DIAMETER, CANTILEVER DESIGN MILL, STAINLESS; INCLUDES FORMING MILL; 2-ROLL WELDBOX WITH LINCOLN MA-20 DIRECT ARC CONTROLLER, MILLER WELDERS, COOLING BATH, 2-PLANE BEAD ORIENTATION STANDS WITH MOTORIZED BEAD CONDITIONER; SIZING MILL, WITH MULTIMAC ECT, DROS; CUTOFF SAW; MACKINTOSH HEMPHILL 6-ROLL STRAIGHTENER, WITH EDDY CURRENT TESTER (605153F)

TIG TUBE MILL LINE, 3/8IN TO 5/8IN TUBE DIAMETER, 0.020 TO 0.065IN WALL THICKNESS; WITH SINGLE MANDREL UNCOILER; FORMING MILL; 2-ROLL WELDBOX WITH CYCLOMATIC 90A ARC PATTERN CONTROLLER, WATER COOLER, HOLE DETECTOR; WELD SEAM ORIENTATION; HAMMER BEAD ROLLING STAND; INDUCTION HEATER, MAGNETIC ANALYSIS CORP EDDY CURRENT TESTER; TURKS HEADS; CUTOFF SAW; 6-ROLL MACKINTOSH HEMPHILL STRAIGHTENER; TOOLING 0.5/0.562IN. (605153B)

RAFTER TUBE MILL LINE, 0.5 TO 1.5IN TUBE DIAMETER, 0.028 TO 0.83IN WALL THICKNESS, STAINLESS, WITH INLINE BRIGHT ANNEALING; COMPLETE LINE, INCLUDING AMERICAN STEEL LINE 6000LB DOUBLE END UNCOILER; UNIVERSAL DRIVE MILL, SINGLE POINT STAND ADJUSTMENT; ROFIN SINAR HF 80 LASER WELDER, WITH 3-ROLL WELDBOX AND ROFIN SINAR DRO, RP1 WELD CONTROLLER AND CHILLER; RAFTER SQUEEZE STAND WITH ROLL MAG POSITIONER; INLINE BRIGHT ANNEALING, NITROGEN/HYDROGEN; WITH HIGH PRESSURE WASH; CUTOFF SAW; STACKER; INLINE BRUSH DE-BURR; DIGITAL TOUCH SCREEN CONTROLLERS AND DROS; TOOLING 0.5/0.625/0.634/0.78/0.884/1.0/1.178/1.25IN (605153A)

RAFTER TUBE MILL LINE, 0.5 TO 1.75IN TUBE DIAMETER, 0.12 MAX WALL THICKNESS; COMPLETE LINE, WITH LITTELL 6000LB DOUBLE-END UNCOILER WITH COIL KEEPERS; RAFTER FORMING MILL WITH UNIVERSAL DRIVE, SINGLE POINT ADJUSTMENT, DRO; ROFIN SINAR HF 880 SEAM TRACKER LASER WELDER WITH 3-ROLL WELDBOX, WITH CHILLERS, 4-ROLL SEAM ORIENTATION AND MAG SEAM POSITIONER, HAMMER FORGE SEAM ROLLER WITH CONTROLLER; ENCUR INC. INDUCTION HEATER WITH DUAL HEATING; INLINE BRIGHT ANNEALING, NITROGEN/HYDROGEN WITH TEMP CONTROLLER AND AB DRO; RAFTER SIZING MILL; MAGNETIC ANALYZER CORP ECT, DROS; CUTOFF SAW; INLINE DOUBLE-HEAD END FINISHING/BRUSHING; TOOLING 0.5/0.625/0.634/0.78/0.884/1.0/1.178/1.25IN (S/N: 605153I)